It's used to working. But right now not any more and I don't have any clue.
It's can enter TWRP via adb and everything work like normal.
But when I using combination key to do this. It's just struck there at mi logo for hours if I let it.
I can enter fastboot normally.
Please help
Vermillion_PT.2 said:
It's used to working. But right now not any more and I don't have any clue.
It's can enter TWRP via adb and everything work like normal.
But when I using combination key to do this. It's just struck there at mi logo for hours if I let it.
I can enter fastboot normally.
Please help
Click to expand...
Click to collapse
Try to power off your phone and press volver+, vol- and power at the same time until mi logo appears. Then release allí buttons
Enviado desde mi Redmi 4 mediante Tapatalk
Dang! I don't know why. But it's worked!!! Thanks man!!!!
Related
Hey guys ,
I tried to enter download mode today to revert to stock after flashing PA 3.99
but i get a black screen saying
"fastboot: processing commands"
Any ideas how to use kdz again?
Thanks:laugh:
Switch device off
Hold down volume - key
Connect usb cable
If dont work, try using volume + key or both volume keys
Enviado desde mi LG-E612g usando Tapatalk 2
switch off your phone first
next press the vol+ and vol- key together (hold in etween the two)
power on ur mobile phone ..
a yellowish screen should appear saying EMERGENCY MODE...:good:
raul338 said:
Switch device off
Hold down volume - key
Connect usb cable
If dont work, try using volume + key or both volume keys
Enviado desde mi LG-E612g usando Tapatalk 2
Click to expand...
Click to collapse
drkingtech said:
switch off your phone first
next press the vol+ and vol- key together (hold in etween the two)
power on ur mobile phone ..
a yellowish screen should appear saying EMERGENCY MODE...:good:
Click to expand...
Click to collapse
Tried both of them but I get fast boot rocessing commands in a black screen
P.s -i have an e612
Have you tried this
http://forum.xda-developers.com/showthread.php?t=1131671
should work..!
drkingtech said:
Have you tried this
http://forum.xda-developers.com/showthread.php?t=1131671
should work..!
Click to expand...
Click to collapse
I had seen that but its for a different device
Edit:it only shows how to flash a recovery
my recovery is intact and completely functional i dont know where the hell my download mode is ?!
Sent from my LG-E610 using Tapatalk 4
I cant enter stock recovery ,i tried to power on+volume down, then power+volume down again ,but it just reboots the phone,i am on D80220B_00,please help
My phone is working fine, but i am worried this can be a problem in boot.img or something like that
Enviado de meu LG-D802 usando Tapatalk
There are other combinations like power on as soon as you see LG logo let go and hold volume up+down, also you can't boot into the stock recovery the way LG designed it is that you get into a factory reset screen, I know with adb you can reboot into stock recovery but it still goes the o ugh factory reset screen
Sent from my dogs lg-d800
XxZombiePikachu said:
There are other combinations like power on as soon as you see LG logo let go and hold volume up+down, also you can't boot into the stock recovery the way LG designed it is that you get into a factory reset screen, I know with adb you can reboot into stock recovery but it still goes the o ugh factory reset screen
Sent from my dogs lg-d800
Click to expand...
Click to collapse
But before flashing the kdz i was doing power+volume down and it was working fine
Enviado de meu LG-D802 usando Tapatalk
lucasd28 said:
But before flashing the kdz i was doing power+volume down and it was working fine
Enviado de meu LG-D802 usando Tapatalk
Click to expand...
Click to collapse
I know that but when they started releasing the knock code update they changed the button combination for recovery I don't know why, go ask lg
Sent from my dogs lg-d800
XxZombiePikachu said:
I know that but when they started releasing the knock code update they changed the button combination for recovery I don't know why, go ask lg
Sent from my dogs lg-d800
Click to expand...
Click to collapse
I will try this combination when i get home
Enviado de meu LG-D802 usando Tapatalk
After trying to install b321 on L29 now my phone is just stuck on your device is booting. I can't get into fastboot by holding volume down and power. Please help
UnchartedRd said:
After trying to install b321 on L29 now my phone is just stuck on your device is booting. I can't get into fastboot by holding volume down and power. Please help
Click to expand...
Click to collapse
with your device plugged in ?
just turn off your phone after you press the volume down you connect the USB cable
Enviado desde mi HUAWEI NXT-L09 mediante Tapatalk
http://forum.xda-developers.com/mate-8/general/unbrick-updating-to-b321-t3375934/page8
Take a look here if any of the steps help.
Today my phone when I woke up was not responding then I presse power button + volume down key and now it it stuck at fast boot... Plz help anyone
Press power key for 30 seconds. It will reboot
MiA1 Bricked when i installing custom rom
alkesh95 said:
Press power key for 30 seconds. It will reboot
Click to expand...
Click to collapse
Please help me my phone not opening only vibrating, not fastboot mode opening
iMuzaid said:
Please help me my phone not opening only vibrating, not fastboot mode opening
Click to expand...
Click to collapse
you phone is working ?
Redmi 4X cihazımdan Tapatalk kullanılarak gönderildi
My phone is being stuck at Mi logo while installing stock ROM . I can't access fastboot/recovery with keys. The device boots and stuck at Mi logo and fastboot/recovery doesn't show up . I already tried those methods and didn't worked .
Try to Press all 3 button(vol up+down+power) overthan 1 min
Hold the volume (both +&-) and power key when you see the mi logo. Then as soon as the screen goes off just release the power button while holding the volume keys.
Please help me finding a solution.
shuvo_king said:
My phone is being stuck at Mi logo while installing stock ROM . I can't access fastboot/recovery with keys. The device boots and stuck at Mi logo and fastboot/recovery doesn't show up . I already tried those methods and didn't worked .
Try to Press all 3 button(vol up+down+power) overthan 1 min
Hold the volume (both +&-) and power key when you see the mi logo. Then as soon as the screen goes off just release the power button while holding the volume keys.
Please help me finding a solution.
Click to expand...
Click to collapse
Is the device shown in Windows device manager?
Can you reach the device by ADB/Fastboot?
Wolfcity said:
Is the device shown in Windows device manager?
Can you reach the device by ADB/Fastboot?
Click to expand...
Click to collapse
no it doesn't even show up in "windows device manager" not showing on adb/fastboot too...
shuvo_king said:
no it doesn't even show up in "windows device manager" not showing on adb/fastboot too...
Click to expand...
Click to collapse
Are you sure you've installed the right firmware? How did you install it? Only thing that comes to my mind would be Mi Tool 2 if you haven't tried it.
Wolfcity said:
Are you sure you've installed the right firmware? How did you install it? Only thing that comes to my mind would be Mi Tool 2 if you haven't tried it.
Click to expand...
Click to collapse
mi tool 2 works only if its in fastboot mode.... I cant even get that far yet... just bootloop over and over again