***** Phone STUCK after firmware update **** HELP ***** - Huawei Ascend XT Questions & Answers

After performed wipe cache and firmware update with "Swift&Fast Slim B160 aio" ROM, the phone reboot and stuck at waiting for booting... ==> wait for 3 hours and still show the same as BOOTING.
Performed the factory reset by press Volume Up and Power, the Factory Reset is now stuck at 99%
Please help to the the phone back in working condition.

Did you get this resolved?

I have same problem

What was done to the phone since it last worked correctly?
Loay7773 said:
I have same problem
Click to expand...
Click to collapse

Use twrp to install this rom
Gửi từ H1611 của tôi bằng cách sử dụng Tapatalk

try my b170 rom see if it flashes before install mount all partitions then format all but ur sdcard of course if data is encrypted wipe with format then type yes then install also use my twrp in my sig down below

Related

cwm recovery 5.5.0.4 error in galaxy s i9001/plus

hi guys,
i seriously need your help i was installing cm9
so from stock 2.3.6 xqb i first root it then install cwm recovery 5.5.0.4 and reboot it then went back to recovery mode and i am getting an error that cant mount cache recovery command but still i took a risk and flash cm9(files were in internal sd card and exteral sd card is not mounted/is not there).
it installed sucessfully then reboot it
and got stuck in boot animation i dont know what to do i need your help
ayaad said:
hi guys,
i seriously need your help i was installing cm9
so from stock 2.3.6 xqb i first root it then install cwm recovery 5.5.0.4 and reboot it then went back to recovery mode and i am getting an error that cant mount cache recovery command but still i took a risk and flash cm9(files were in internal sd card and exteral sd card is not mounted/is not there).
it installed sucessfully then reboot it
and got stuck in boot animation i dont know what to do i need your help
Click to expand...
Click to collapse
Did you do factory reset, wipe cache and dalvik cache?
Verstuurd van mijn GT-I9001 met Tapatalk
Yes i did it before intalling
Sent from my GT-I9001 using XDA
Guyz help me
Sent from my GT-I9001 using XDA
Try to wipe eveything
when i had bootloop it was a solution
did it and finally installed it thanks guy
Sent from my GT-I9300 using XDA
cant mount/cache/recovery/command
have the same problem, i installed CWM v5.5.0.4, than i did backup, and than i stucked in boot menu. I deleted everything, factory reseted many times, and nothing helped. Before, i have BlazR 7.1 themed. Everytime i reboot,i cmeback to recoveryscreen,and at he bottom it sais cant mount cache... Please help me!!! I've tried everything. Im new to this all,i got my phone only for month or so.. Thanks in advance..
---------- Post added at 02:07 AM ---------- Previous post was at 01:37 AM ----------
HELP PLS!!!
Did you use arco's recovery or this one?

Hyperion 8 GM final bulid installation error

i flashed stock rom, then flashed Hyperion 8 GM final build. But its gets rebooted again to recovery mode which displays "multi csc system/csc"
pls help
May be you need to download rom again!
Gửi từ Galaxy Y bằng cách sử dụng tia X truyền từ mặt trời!
Siddk007 said:
i flashed stock rom, then flashed Hyperion 8 GM final build. But its gets rebooted again to recovery mode which displays "multi csc system/csc"
pls help
Click to expand...
Click to collapse
how u flash the rom tell me the installation procedure
TheRoHit18 said:
how u flash the rom tell me the installation procedure
Click to expand...
Click to collapse
i followed the instructions properly and flashed but no success
Siddk007 said:
i followed the instructions properly and flashed but no success
Click to expand...
Click to collapse
go to cwm mount every thing then
wipe data , cache go to advance wipe
dalvik cache and wipe battery stats
then again mount every thing and
flash the final build.
follow this instruction
again
TheRoHit18 said:
go to cwm mount every thing then
wipe data , cache go to advance wipe
dalvik cache and wipe battery stats
then again mount every thing and
flash the final build.
follow this instruction
again
Click to expand...
Click to collapse
i did exactly the same, but same error.
i tried to flash hyperion 8 pre gm, it got installed properly!
Siddk007 said:
i did exactly the same, but same error.
i tried to flash hyperion 8 pre gm, it got installed properly!
Click to expand...
Click to collapse
then try to flash first percy#10 kernel and then flash the final build
TheRoHit18 said:
then try to flash first percy#10 kernel and then flash the final build
Click to expand...
Click to collapse
percy's kernel is for cm roms. this rom is kernel-free.
maybe i should download the rom again!!
Siddk007 said:
percy's kernel is for cm roms. this rom is kernel-free.
maybe i should download the rom again!!
Click to expand...
Click to collapse
bro am talking about percy gnu kernel which is for stock based rom.
TheRoHit18 said:
bro am talking about percy gnu kernel which is for stock based rom.
Click to expand...
Click to collapse
ohh ok.will try. thanks for help!
bytheway i am using dxll1 baseband. Is it fine?
(i u want u can close the thread)
Siddk007 said:
ohh ok.will try. thanks for help!
bytheway i am using dxll1 baseband. Is it fine?
(i u want u can close the thread)
Click to expand...
Click to collapse
yeah its fine
Press THANKS if I Helped
I think it 's because of update-script in rom?
Gửi từ Galaxy Y bằng cách sử dụng tia X truyền từ mặt trời!
Cậu Chủ Nhỏ said:
I think it 's because of update-script in rom?
Gửi từ Galaxy Y bằng cách sử dụng tia X truyền từ mặt trời!
Click to expand...
Click to collapse
no if the problem is in updater script , the rom will never b flashed successfully .it will give error installation aborted
---------- Post added at 01:12 PM ---------- Previous post was at 01:12 PM ----------
Cậu Chủ Nhỏ said:
I think it 's because of update-script in rom?
Gửi từ Galaxy Y bằng cách sử dụng tia X truyền từ mặt trời!
Click to expand...
Click to collapse
no if the problem is in updater script , the rom will never b flashed successfully .it will give error installation aborted.
vietnam
vietnam
great
Gửi từ GT-S5360 của tôi bằng cách sử dụng Tapatalk 2
Sir do this
Flash any stock rom via odin
Flash hellfusion#50 / or any other kernel ?
Boot to Android System Recovery mode by pressing volume up key + home button + power key for 3 seconds or until you see the Samsung Galaxy Young GT-S5360 screen
After that, immediately release the keys and press it again until the recovery shows up.
In recovery, select install zip from sd card.
After that, select TempCWM.zip from the list.
After that, you will then see ClockWorkMod Recovery with texts in yellow color.
In ClockWorkMod Recovery, select mounts and storage.
Mount /system, /data, cache.
Go back by pressing the power button or the back key.
Select advanced and debugging.
Select wipe dalvik cache and wipe batterystats.bin (optional).
Go back by pressing the power button or the back key.
Select wipe data/factory reset.
Select wipe cache.
Select install zip from sd card.
Select choose zip from sd card.
Select Hyperion zip package (HYPERION-08.GM-FINAL.zip).
Then reboot
Press thanks if i help ! ))
markjerald said:
Sir do this
Flash any stock rom via odin
Flash hellfusion#50 / or any other kernel ?
Boot to Android System Recovery mode by pressing volume up key + home button + power key for 3 seconds or until you see the Samsung Galaxy Young GT-S5360 screen
After that, immediately release the keys and press it again until the recovery shows up.
In recovery, select install zip from sd card.
After that, select TempCWM.zip from the list.
After that, you will then see ClockWorkMod Recovery with texts in yellow color.
In ClockWorkMod Recovery, select mounts and storage.
Mount /system, /data, cache.
Go back by pressing the power button or the back key.
Select advanced and debugging.
Select wipe dalvik cache and wipe batterystats.bin (optional).
Go back by pressing the power button or the back key.
Select wipe data/factory reset.
Select wipe cache.
Select install zip from sd card.
Select choose zip from sd card.
Select Hyperion zip package (HYPERION-08.GM-FINAL.zip).
Then reboot
Press thanks if i help ! ))
Click to expand...
Click to collapse
Thans sir its working!!
Sent from my GT-S5360 using xda app-developers app
yes,its works fine on me,then i used percy and work to the finest
testing Hyperion GM 8 v2
and I have hit a wall. Link to SD refuses to install. so i can move apps over to secondary HD comes up with this error msg, Error, unable to install to the default directory, will i need to patch phone with the Hyperion g8 rl fix as well or what, assist please cheers

PhilZ Recovery Help! :(

So I have a problem
My old good friend TWRP Recovery is not working
when i try to enter twrp Recovery my phone is stucking at the blue Text (recovery booting...) and my S4 get very hot and then Reboot.
But now i'm using PhilZ and i want to flash a custom ROM.
I have the ROM and Gapps in my Download folder.
(because i dont have that small mini sdcards )
When i click on Factory Reset there is written :
Data and other stuff like cache...
But i have the ROM in my Download folder and the Factory Reset would probaly erase the Download folder, too where the Custome ROM is
Can someone tell my how to flash Custom ROMs in PhilZ without erasing download folder?
I'm using S4 GT-I9505 Jfltexx DBT
And on the FW NK4
Knox already 0x1
Rooted
Sry for my Master (Bad [emoji23] ) English
Normal reset doesn't wipe the SD card
Just wipe and flash it
SheepGolden said:
So I have a problem
My old good friend TWRP Recovery is not working
when i try to enter twrp Recovery my phone is stucking at the blue Text (recovery booting...) and my S4 get very hot and then Reboot.
But now i'm using PhilZ and i want to flash a custom ROM.
I have the ROM and Gapps in my Download folder.
(because i dont have that small mini sdcards )
When i click on Factory Reset there is written :
Data and other stuff like cache...
But i have the ROM in my Download folder and the Factory Reset would probaly erase the Download folder, too where the Custome ROM is
Can someone tell my how to flash Custom ROMs in PhilZ without erasing download folder?
I'm using S4 GT-I9505 Jfltexx DBT
And on the FW NK4
Knox already 0x1
Rooted
Sry for my Master (Bad [emoji23] ) English
Click to expand...
Click to collapse
Flash the zip in internal memory(your download folder) in Philz and do a wipe afterwards.
Best to buy a SD card and flash the .zip from there
ludoke said:
Flash the zip in internal memory(your download folder) in Philz and do a wipe afterwards.
Best to buy a SD card and flash the .zip from there
Click to expand...
Click to collapse
Ehm NO!! i have to wipe before installing!
SheepGolden said:
Ehm NO!! i have to wipe before installing!
Click to expand...
Click to collapse
Ok,do it your own way !
ludoke said:
Ok,do it your own way !
Click to expand...
Click to collapse
Wiping afterwards has no point. You would wipe the rom you just flashed.

please help. Note 3 n9005 stuck in bootloop

when I turn my phone on it says
"recovery booting...
Set warranty bit : Recovery"
and it reboots.
i cant access recovery or download modes.
can someone please advise me on what to do??
Boot into recovery and wipe cache plus dalvic cache. Then start new,should run.
Sry didn't read 5he threat correctly.Take off the battery for a few minutes the try to boot into the recovery mode.
Gesendet von meinem SM-N9005 mit Tapatalk
manne48 said:
Boot into recovery and wipe cache plus dalvic cache. Then start new,should run.
Sry didn't read 5he threat correctly.Take off the battery for a few minutes the try to boot into the recovery mode.
Gesendet von meinem SM-N9005 mit Tapatalk
Click to expand...
Click to collapse
full story is that i was flashing custom roms and recovery and now it wont boot up or boot into recovery mode. ive got it to boot into download mode. is there a way to flash all the software so its the same as when i got it out of the box?
BallaratBloke81 said:
full story is that i was flashing custom roms and recovery and now it wont boot up or boot into recovery mode. ive got it to boot into download mode. is there a way to flash all the software so its the same as when i got it out of the box?
Click to expand...
Click to collapse
Use odin to flash the stock rom which you can get sammobile.
saadramiz said:
Use odin to flash the stock rom which you can get sammobile.
Click to expand...
Click to collapse
ok, i have done that
the phone boots up now, but now at times the phone is unresponsive. touchscreen and softkeys are unresponsive. i have managed to unlock the phone and turn USB debugging on
something is still not right
if it helps, the custom rom i had was X-note kitkat for SM-N9005
Did you perform a full factory wipe in stock recovery?
i did, yes
BallaratBloke81 said:
ok, i have done that
the phone boots up now, but now at times the phone is unresponsive. touchscreen and softkeys are unresponsive. i have managed to unlock the phone and turn USB debugging on
something is still not right
if it helps, the custom rom i had was X-note kitkat for SM-N9005
Click to expand...
Click to collapse
After flashing newest stock ROM before doing startup wizard boot in recovery mode and wipe factory data and swipe cache partion
Sent from my SM-N900 using Tapatalk
BallaratBloke81 said:
ok, i have done that
the phone boots up now, but now at times the phone is unresponsive. touchscreen and softkeys are unresponsive. i have managed to unlock the phone and turn USB debugging on
something is still not right
if it helps, the custom rom i had was X-note kitkat for SM-N9005
Click to expand...
Click to collapse
So, have you been able to get your N3 in perfectly working condition?
Sent from my SM-G9250 using Tapatalk
BallaratBloke81 said:
i did, yes
Click to expand...
Click to collapse
Where did you download your stock firmware?
Check sammobile.com for stock Samsung firmware.
BallaratBloke81 said:
when I turn my phone on it says
"recovery booting...
Set warranty bit : Recovery"
and it reboots.
i cant access recovery or download modes.
can someone please advise me on what to do??
Click to expand...
Click to collapse
Flash a stock rom using Odin and it will solved the issue.

twrp trouble

hey guys im trying to root my 5.5 zenfone 3 but im having trouble. ive unlocked the bootloader the official way and then flashed twrp but i left my pin on so i cant mount anything but now my phone wont boot at all, it just says dm-verity in eio mode and keeps rebooting whats the best way to fix this?
Format Data man
I did try that and it didn't work so I went crazy and kept formatting everything I could and flashing rims and finally it's working now lmao
Sent from my Mi A1 using Tapatalk
robgee789 said:
I did try that and it didn't work so I went crazy and kept formatting everything I could and flashing rims and finally it's working now lmao
Sent from my Mi A1 using Tapatalk
Click to expand...
Click to collapse
Hi i have the same issue as u. Now im stuck at dm verity and phone kee rebooting. I cant flash anything with fastboot. Would you share how u make the phone work again. Thank you
vkez said:
Hi i have the same issue as u. Now im stuck at dm verity and phone kee rebooting. I cant flash anything with fastboot. Would you share how u make the phone work again. Thank you
Click to expand...
Click to collapse
I literally used fastboot to wipe everyt9i could then tried flashing different twrp and then using that to wipe everything and once I could mount everything I needed I flashed pixel experience mate. But it was hard to boot to twrp it would only work like 1 in 10 tries so just keep trying mate
Sent from my ASUS_Z012DA using Tapatalk
robgee789 said:
I literally used fastboot to wipe everyt9i could then tried flashing different twrp and then using that to wipe everything and once I could mount everything I needed I flashed pixel experience mate. But it was hard to boot to twrp it would only work like 1 in 10 tries so just keep trying mate
Sent from my ASUS_Z012DA using Tapatalk
Click to expand...
Click to collapse
Could you please share the correct commands for wipe the data please.. thanks alot for replying.
vkez said:
Could you please share the correct commands for wipe the data please.. thanks alot for replying.
Click to expand...
Click to collapse
fastboot erase cache
fastboot erase userdata
But it think wiping everything tin twrp is what did the trick you need to wipe everything you can then flash twrp again then wipe everything again and keep trying to mount everything and flash your rom
Sent from my Mi A1 using Tapatalk
robgee789 said:
fastboot erase cache
fastboot erase userdata
But it think wiping everything tin twrp is what did the trick you need to wipe everything you can then flash twrp again then wipe everything again and keep trying to mount everything and flash your rom
Sent from my Mi A1 using Tapatalk
Click to expand...
Click to collapse
Hi.. stil found no solution for me. Do u have any other commands or ideas. I tried flash alot of twrp versions still cant fix it. Or do u mind sharing the twrp u used.
It seems the same problem for me it shows DMverity in EIOmode. Thanks for helping mate.
vkez said:
Hi.. stil found no solution for me. Do u have any other commands or ideas. I tried flash alot of twrp versions still cant fix it. Or do u mind sharing the twrp u used.
It seems the same problem for me it shows DMverity in EIOmode. Thanks for helping mate.
Click to expand...
Click to collapse
i dont mate i just kept wiping in twrp and trying to get everything mounted
this is the twrp i used mate
https://mega.nz/#!jdIAnazY!bNxM76QRXK8wczsCma6BKgm10PYndYXcZphKUCwLH2o
it can be arkward to boot to twrp if i remeber mate try turning phone off and holding down the volume down and power buttons till it boots then when you get the boot loader screen press volume down on its own
Has anyone succeeded, I was stuck in the same problem, then I installed Magisk from Twrp and it worked for me from the problem

Categories

Resources