Database Users

[TUTORIAL] Easy way for UNLOCK Bootloader and flash TWRP 2.8.6.0 for MX4

All your actions with the phone is at your own risk. The authors are not liable. This is just your choice.
PLEASE read full instructions before you start.
RECOMMENDED ONLY FOR EXPERIENCED USERS.
This was tested ONLY on MEIZU MX4 and ONLY FIRMWARE 4.2.8.2A, ANY OTHER FIRMWARE/PHONE - YOU WILL RECEIVE BRICK PHONE.
(с)
ONLY FOR MEIZU MX4 AND ONLY FIRMWARE 4.2.8.2A. Don't use the that apk on Lollipop or your device will brick​
Hello everyone, i changed chinese apk for unlock bootloader, and replaced chinese recovery, on TWRP 2 8.6.0 recovery.
1. Download Flyme OS 4.2.8.2A stock firmware an official webpage Meizu
2. Flash it in stock recovery and select WIPE DATA
3. Get root permission
4. Download and install that APK - drive.google.com/open?id=0B_Gd_o_kBWgLNHFuZW5kMlFzV2s
5. Open that app, and provide root permission.
6. Press "Press to UNLOCK BootLoader" - and wait, you will see "Unlock Finished"
7. After, will be available recovery mode, and you press to "Enter Recovery Mode"
8. Your phone reboot and enters for normal recovery - TWRP 2.8.6.0.

Thanks for the great work!
At last we're getting closer to opening up our meizu phones.
Can the phone with this, unlocked bootloader flash "I" international roms from OTA?

How to relock?

ideosx5 said:
How to relock?
Click to expand...
Click to collapse
Reflash FLyme rom (with Flyme recovery, be carefull!)
Or flash stock uboot

Successfully upgraded MX4 "A" edition phone to "I" using following method:
Installed 4.2.8 "A" stock firmware.
1. Installed apk method unlock (this thread).
2. Downloaded 4.5.7 "I" firmware, extracted and created system.img using (linux):
$ sdat2img system.transfer.list system.new.dat system.img
for windows, see this guide from Meizufans.
3. Boot into fastboot mode (now unlocked) using "VOL -" + "POWER"
4. fastboot flash boot boot.img
WAIT
fastboot flash system system.img
WAIT
5.Reboot into recovery
6. Full wipe
7. Install super su
8. Reboot
VOILA - 4.5.7 "I"
Remember to block/deactivate system updates once system has booted for first time.

Is it possible for someone to upload recovery.img of TWRP please ? I'd like to try
---------- Post added at 10:16 AM ---------- Previous post was at 09:22 AM ----------
I got it, I'm fixing the splash screen dimensions ahah^^
---------- Post added at 11:03 AM ---------- Previous post was at 10:16 AM ----------
It was a little harder than I expected but it's here : http://www.mediafire.com/download/26b963db1k489db/new-recovery.img

Learnincurve said:
Successfully upgraded MX4 "A" edition phone to "I" using following method:
Installed 4.2.8 "A" stock firmware.
Click to expand...
Click to collapse
Good, but there is easy way download that rom, and install it for TWRP(select full wipe, include internal storage) - emmaus.pro/MX4_custom_roms/Flyme/4.5.7i_twrp.zip
and there all stock Flyme roms for twrp - emmaus.pro/?dir=MX4_custom_roms/Flyme
Author all rom "nikk3d" russian 4pda users - 4pda.ru/forum/index.php?showuser=2196261

And this method works even on newest firmware, let's say 4.5.6i downgraded to 4.2.8i via 4.0.4i? Or is a easy variant of previous method, patched uboot by meizu remains after 4.5.6i upgrade if i understand, no matter if you downgrate to Kitkat?

update for TWRP : http://www.mediafire.com/download/f6a65ccpgrfaopw/TWRPr5.img
Changelog :
I corrected "Select storage" position, corrected some shifts on the main screen

zaurikk said:
Good, but there is easy way download that rom, and install it for TWRP(select full wipe, include internal storage) - emmaus.pro/MX4_custom_roms/Flyme/4.5.7i_twrp.zip
and there all stock Flyme roms for twrp - emmaus.pro/?dir=MX4_custom_roms/Flyme
Author all rom "nikk3d" russian 4pda users - 4pda.ru/forum/index.php?showuser=2196261
Click to expand...
Click to collapse
I have an MX4 originally with Ubuntu touch, I tried to flash 4.5.7i from emmaus.pro.
It failed, updater binary error. I checked the recovery log and it says write error, no space left.
Does anybody have any clue?
Thanks,
Note: I already tried a wipe out (even internal storage). No issues with the cyanogenmod roms from emmaus.pro.

Is someone trying to make fom Meizu MX5?
Sent from my MX5 using Tapatalk

itresw said:
I have an MX4 originally with Ubuntu touch, I tried to flash 4.5.7i from emmaus.pro.
It failed, updater binary error. I checked the recovery log and it says write error, no space left.
Does anybody have any clue?
Thanks,
Note: I already tried a wipe out (even internal storage). No issues with the cyanogenmod roms from emmaus.pro.
Click to expand...
Click to collapse
i think, mx4 ubuntu touch version, and standard china version, - internal partitions(storage) name - different, so you gives write an error.

isko01 said:
Is someone trying to make fom Meizu MX5?
Sent from my MX5 using Tapatalk
Click to expand...
Click to collapse
Now it is impossible.

zaurikk said:
Now it is impossible.
Click to expand...
Click to collapse
Thanks for reply . Can I know how much is good Caynogenmod on MX4? Is everything working good?
Sent from my MX5 using Tapatalk

isko01 said:
Thanks for reply . Can I know how much is good Caynogenmod on MX4? Is everything working good?
Sent from my MX5 using Tapatalk
Click to expand...
Click to collapse
Yep, all needed function now it work - gsm module, wi-fi, bluetooth and etc.
The only problem, that ROM not officially for Cyanogen team, that rom created by ordinary users and updated 1-2 times on month.

i tried on M2 note, i suppose it bricked.is it possible earlier condition working?i look up some unbrick videos, can repairs make my phone working?thanks.

No way to unbrick it, this is for MX4 not M2 Note !!! You'll need to change the motherboard, sorry

zaurikk said:
Yep, all needed function now it work - gsm module, wi-fi, bluetooth and etc.
The only problem, that ROM not officially for Cyanogen team, that rom created by ordinary users and updated 1-2 times on month.
Click to expand...
Click to collapse
Thanks to all user's who making this for MX4. They are really engineers! I hope they will try for MX5.
Yes, the problem it is not official, and we cant get new update.
Why we don't write a email to Canynogen and tell them that we open the bootloader and put CM. But we want they make CM for MX4 and MX5, with new CM and updates?
Sent from my MX5 using Tapatalk

my meizu is bricked, ne response please help me

hi someone had tested this app already? is it surely gonna work??
and after i will unlock the bootloader i can instal any rom? like Mokee and CM12.1??

root on Zenfone 3 laser (zc551kl) ?

Has a method for rooting the zc551kl been made available?
Why is it taking so long? Is it because there is no bootloader unlock available yet? I've tried kingroot, TWRP, SRSroot, damn I think I've tried them all. Can someone help me?

No BL unlock, no root. It's that simple.

Custom rom for Asus Zenfone 3 Laser
How about custom rom for Asus Zenfone 3 laser (zc551kl) ? Is there anyone can make pre rooted custom rom ?

Armdfx said:
How about custom rom for Asus Zenfone 3 laser (zc551kl) ? Is there anyone can make pre rooted custom rom ?
Click to expand...
Click to collapse
No BL unlock, no custom ROMs. It's that simple.

sensi277 said:
No BL unlock, no custom ROMs. It's that simple.
Click to expand...
Click to collapse
Hi!, ASUS just released the Bootloader unlock tool app. It can be downloaded from the tech support web page (can´t post links jet, sorry).

Jordi_rgv said:
Hi!, ASUS just released the Bootloader unlock tool app. It can be downloaded from the tech support web page (can´t post links jet, sorry).
Click to expand...
Click to collapse
I successfully unlocked the bootloader on firmware Android N. waiting for TWRP port and root.

ntuxas95 said:
Has a method for rooting the zc551kl been made available?
Why is it taking so long? Is it because there is no bootloader unlock available yet? I've tried kingroot, TWRP, SRSroot, damn I think I've tried them all. Can someone help me?
Click to expand...
Click to collapse
Hi, the official bootloader unlocking tool is out, and there is an option to flash TWRP and root ZenFone 3 Laser. Let me know if you're still interested. I'm using ZC551KL rooted with TWRP Android 7.1.1 stock.

How?
Freelancer said:
Hi, the official bootloader unlocking tool is out, and there is an option to flash TWRP and root ZenFone 3 Laser. Let me know if you're still interested. I'm using ZC551KL rooted with TWRP Android 7.1.1 stock.
Click to expand...
Click to collapse
Hello bro how i can do that? I have an asus zenfone 3 laser with the bootloader unlocked... now what? You cam tell us the next step please
..asap
---------- Post added at 01:37 PM ---------- Previous post was at 01:34 PM ----------
Freelancer said:
Hi, the official bootloader unlocking tool is out, and there is an option to flash TWRP and root ZenFone 3 Laser. Let me know if you're still interested. I'm using ZC551KL rooted with TWRP Android 7.1.1 stock.
Click to expand...
Click to collapse
By the way I am using stock Asus firmware N 7.1.1 for me is fine but I needed root access

How to install unofficial TWRP and root your Zenfone 3 Laser (ZC551KL / Z01BDC)
Copper1983 said:
Hello bro how i can do that? I have an asus zenfone 3 laser with the bootloader unlocked... now what? You cam tell us the next step please
..asap
---------- Post added at 01:37 PM ---------- Previous post was at 01:34 PM ----------
By the way I am using stock Asus firmware N 7.1.1 for me is fine but I needed root access
Click to expand...
Click to collapse
OK, Here we go; You downloaded bootloader unlock tool from Asus and want to root: https://www.asus.com/us/Phone/ZenFone-3-Laser-ZC551KL/HelpDesk_Download/
FILES TO DOWNLOAD:
-First you need to download the unofficial TWRP that works for this phone (twrp-3.1.1-unofficial): https://depositfiles.com/files/ux8w5thp6
-Second, you need superSU file (Many thanks and credits to @mauam for the links): https://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
-Third, if supersu doesn't work, you need Magisk v.15.3 (Lots of thanks and credits to @topjohnwu for providing us with these tools): https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
-Fourth, download ADB drivers and install them in your PC: https://gsmusbdriver.com/asus-zenfone-3-laser-zc551kl
-Again many thanks and credits to @Gt5228 for the original helpful "Idiots Guide" of how to root ZC551KL. If you have issues, follow this thread for info, links and solutions: https://forum.xda-developers.com/zenfone-3/help/how-to-root-zenfone-3-laser-zc551kl-t3502606/page5
NOTE: For some phones, superSU doesn't work. I run Android Nougat 7.1.1 stock on ZC551KL, and using superSU soft bricked my phone. I had to flash the stock again and try Magisk instead supersu, which worked. Others used successfully another version of SU, so please read the original thread before you start if you still have questions. I am not responsible for bricking your phone or any other issue you may encounter. Just to be safe, make sure you backed up your device, and have access to the original firmware file just in case you need to flash it again.
HOW TO:
-Install adb drivers;
-Enable debugging on your phone;
-Copy "twrp-3.1.1.unofficial.img" on your installed ADB folder (PC);
-Copy "Magisk-v15.3" or "superSU" on your phone's SD Card;
-Go in adb folder where your files are and pressing and holding "Shift" right click on nothing inside your folder and choose "Open command prompt here"
-With your phone still on and connected to PC, type "adb devices" You should see a serial number, that means your phone is connected via adb and you are good to go;
-Next, type "adb reboot bootloader"
-Once in bootloader type: "fastboot flash recovery <file name>.img (fastboot flash recovery twrp-3.1.1.unofficial.img);
-After Flashing, DO NOT REBOOT YOUR PHONE INTO SYSTEM!!! Reboot into Recovery!
-Using vol up/down choose Recovery and wait to reboot on TWRP. You'll be asked for your pin if you have one;
-In TWRP (Recovery) press "INSTALL" from main menu and navigate to your saved file on SD Card (superSU or Magisk) and select it;
-After the installation, clean cache and restart. Now your phone has TWRP recovery and is rooted. Enjoy.
This is not entirely my work, all i did was just collecting information and links from web and put them here together.
P.S. I used Windows 7 Ultimate 64bits, USB 2.0 port.
---------- Post added at 07:46 PM ---------- Previous post was at 06:51 PM ----------
Armdfx said:
How about custom rom for Asus Zenfone 3 laser (zc551kl) ? Is there anyone can make pre rooted custom rom ?
Click to expand...
Click to collapse
About custom roms, at this time there's absolutely none ported for ZenFone 3 Laser. I've been looking for weeks now, here on xda and everywhere else and found none to 0... No CM, no AOSP, no Lineage, no Viper OS, no nothing... disappointing, as there's lots of ZC551KL users waiting. As posted here, twrp, bootloader unlocking and rooting is possible, but beside the privacy apps we can install over root, we still have to live with all this blootware on Asus Zenfones. We'll get the Oreo update in August though, if that makes you feel better...

And here is the thread for How to download and install Xposed Framework. Must read as there's a different solutions for everyone. Works for my device. All thanks to @topjohnwu , @rovo89 , @wanam : https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268

(sorry. )

lineage os pb2-650y

Has anyone tried or found any unofficial version of linageos os that works for this model?.
I have mine rooted, twrp, xposed, but I would really like to change the stock OS. Linage would be awesome.

https://forum.mantab.me/thread/9412/custom-rom-nougat-71-lenovo-phab-2-unofficial-lineage-os.xhtml
Ifound this. But model is different, may u try search on that site

dlsega said:
Has anyone tried or found any unofficial version of linageos os that works for this model?.
I have mine rooted, twrp, xposed, but I would really like to change the stock OS. Linage would be awesome.
Click to expand...
Click to collapse
broo could u write a thread or link how u rooted it? im looking on the rusian site
i have been unsucess full 5 time gave up hope (havent retried since 4 months)
i would love to ****ing rootthis phone and have leagos thing
btw found this also http://lenovo-forums.ru/topic/21441-lenovo-phab-2-исходный-код-ядра/
source code

sushil888 said:
https://forum.mantab.me/thread/9412/custom-rom-nougat-71-lenovo-phab-2-unofficial-lineage-os.xhtml
Ifound this. But model is different, may u try search on that site
Click to expand...
Click to collapse
i tried, but avast shows the site as a security risk. I supose you found something for the pb2-650M?

reggiexp said:
broo could u write a thread or link how u rooted it? im looking on the rusian site
i have been unsucess full 5 time gave up hope (havent retried since 4 months)
i would love to ****ing rootthis phone and have leagos thing
btw found this also http://lenovo-forums.ru/topic/21441-lenovo-phab-2-исходный-код-ядра/
source code
Click to expand...
Click to collapse
i followed this guide for rooting
https://forum.xda-developers.com/phab-2/how-to/how-to-root-phab-2-pb2-650y-t3524305
The only trouble I had was unlocking the bootloader, and this step wasn't mentioned it the guide. Before flashing the code to unlock bootloader, in the developer options, (in the phone) I didn't checked the OEM unlocking. After I checked it, flashed the unlock bootloader code successfully, the phone restored to factory, then flashed the TWRP. Just as it's described in the guide. The only difference I noticed is that dlto enter recovery mode after twrp is install you have to push at the same time vol down button + power button.
if after you have root and install twrp you want to install xposed framework, just look for the xposed installer for android 6 arm64 devices.
i used this one here.
http://dl-xda.xposed.info/framework/sdk23/arm64/
choose the newest file

Idlsega, i m bit Confused!!
U r pointing towards 650 Y model to reggie....
Looking for 650 m model custom rom?
Which is yr model ?
And reggie... Is using which model ??

sushil888 said:
Idlsega, i m bit Confused!!
U r pointing towards 650 Y model to reggie....
Looking for 650 m model custom rom?
Which is yr model ?
And reggie... Is using which model ??
Click to expand...
Click to collapse
M and Y are same? i mean i didnt find any difference. only different country same phone
---------- Post added at 08:45 PM ---------- Previous post was at 08:37 PM ----------
dlsega said:
i followed this guide for rooting
https://forum.xda-developers.com/phab-2/how-to/how-to-root-phab-2-pb2-650y-t3524305
The only trouble I had was unlocking the bootloader, and this step wasn't mentioned it the guide. Before flashing the code to unlock bootloader, in the developer options, (in the phone) I didn't checked the OEM unlocking. After I checked it, flashed the unlock bootloader code successfully, the phone restored to factory, then flashed the TWRP. Just as it's described in the guide. The only difference I noticed is that dlto enter recovery mode after twrp is install you have to push at the same time vol down button + power button.
if after you have root and install twrp you want to install xposed framework, just look for the xposed installer for android 6 arm64 devices.
i used this one here.
http://dl-xda.xposed.info/framework/sdk23/arm64/
choose the newest file
Click to expand...
Click to collapse
i tried that last time impossible to boot recovery even after flashing :/ its keepos booting stock recovery :/
---------- Post added at 08:52 PM ---------- Previous post was at 08:45 PM ----------
dlsega said:
i followed this guide for rooting
https://forum.xda-developers.com/phab-2/how-to/how-to-root-phab-2-pb2-650y-t3524305
The only trouble I had was unlocking the bootloader, and this step wasn't mentioned it the guide. Before flashing the code to unlock bootloader, in the developer options, (in the phone) I didn't checked the OEM unlocking. After I checked it, flashed the unlock bootloader code successfully, the phone restored to factory, then flashed the TWRP. Just as it's described in the guide. The only difference I noticed is that dlto enter recovery mode after twrp is install you have to push at the same time vol down button + power button.
if after you have root and install twrp you want to install xposed framework, just look for the xposed installer for android 6 arm64 devices.
i used this one here.
http://dl-xda.xposed.info/framework/sdk23/arm64/
choose the newest file
Click to expand...
Click to collapse
i tried that last time impossible to boot recovery even after flashing :/ its keepos booting stock recovery :/
---------- Post added at 08:53 PM ---------- Previous post was at 08:52 PM ----------
dlsega said:
i followed this guide for rooting
https://forum.xda-developers.com/phab-2/how-to/how-to-root-phab-2-pb2-650y-t3524305
The only trouble I had was unlocking the bootloader, and this step wasn't mentioned it the guide. Before flashing the code to unlock bootloader, in the developer options, (in the phone) I didn't checked the OEM unlocking. After I checked it, flashed the unlock bootloader code successfully, the phone restored to factory, then flashed the TWRP. Just as it's described in the guide. The only difference I noticed is that dlto enter recovery mode after twrp is install you have to push at the same time vol down button + power button.
if after you have root and install twrp you want to install xposed framework, just look for the xposed installer for android 6 arm64 devices.
i used this one here.
http://dl-xda.xposed.info/framework/sdk23/arm64/
choose the newest file
Click to expand...
Click to collapse
i tried that last time impossible to boot recovery even after flashing :/ its keepos booting stock recovery :/
---------- Post added at 08:53 PM ---------- Previous post was at 08:53 PM ----------
dlsega said:
i followed this guide for rooting
https://forum.xda-developers.com/phab-2/how-to/how-to-root-phab-2-pb2-650y-t3524305
The only trouble I had was unlocking the bootloader, and this step wasn't mentioned it the guide. Before flashing the code to unlock bootloader, in the developer options, (in the phone) I didn't checked the OEM unlocking. After I checked it, flashed the unlock bootloader code successfully, the phone restored to factory, then flashed the TWRP. Just as it's described in the guide. The only difference I noticed is that dlto enter recovery mode after twrp is install you have to push at the same time vol down button + power button.
if after you have root and install twrp you want to install xposed framework, just look for the xposed installer for android 6 arm64 devices.
i used this one here.
http://dl-xda.xposed.info/framework/sdk23/arm64/
choose the newest file
Click to expand...
Click to collapse
i tried that last time impossible to boot recovery even after flashing :/ its keepos booting stock recovery :/

reggiexp said:
M and Y are same? i mean i didnt find any difference. only different country same phone
---------- Post added at 08:45 PM ---------- Previous post was at 08:37 PM ----------
i tried that last time impossible to boot recovery even after flashing :/ its keepos booting stock recovery :/
---------- Post added at 08:52 PM ---------- Previous post was at 08:45 PM ----------
i tried that last time impossible to boot recovery even after flashing :/ its keepos booting stock recovery :/
---------- Post added at 08:53 PM ---------- Previous post was at 08:52 PM ----------
i tried that last time impossible to boot recovery even after flashing :/ its keepos booting stock recovery :/
---------- Post added at 08:53 PM ---------- Previous post was at 08:53 PM ----------
i tried that last time impossible to boot recovery even after flashing :/ its keepos booting stock recovery :/
Click to expand...
Click to collapse
They're pretty much the same, the difference is on the LTE bands, the M has works with more I think. (besides the retail region).
I had a similiar problem, and the issue was that the bootloader wasn't being unlocked flashing the commands. It turns out that the thing keeping the bootloader from unlocking was that little OEM UNLOCK check in the DEVELOPER OPTIONS. After I checked that one, tried again, and this time it worked, I first noticed it because the phone started wiping to a factory reset automatically. After that I just put it into fastboot mode, flashed TWRP. And done.
I don't know if this is the same issue you're having. But for me it was a little frustrating trying and trying without success, until I noticed that little detail and that was it.
At the moment I have it rooted with xposed working just fine. The only issue (don't know if it's only me), is when recording a video using 3rd party apps like instagram or snapchat, the audio is garbage, like some noise cancellation going wrong.

im sure i had that ticked but i guess not. will retry once i fix my xiaomi redmi note 3 who has a memory failure (same on my mom's phone redmi note 3) both crashed 2weeks apart from each other. they boot but as soon as u download 5apps thr phone bootloops... and now im trying to get mi flash to work but its been a long time and i can't figure it out... so now using this massive phone fr 3months its a good phone but damn that quad core is slow... and apps close way to quick on back ground. anyway i will try and root again some dag and install linea os.

reggiexp said:
im sure i had that ticked but i guess not. will retry once i fix my xiaomi redmi note 3 who has a memory failure (same on my mom's phone redmi note 3) both crashed 2weeks apart from each other. they boot but as soon as u download 5apps thr phone bootloops... and now im trying to get mi flash to work but its been a long time and i can't figure it out... so now using this massive phone fr 3months its a good phone but damn that quad core is slow... and apps close way to quick on back ground. anyway i will try and root again some dag and install linea os.
Click to expand...
Click to collapse
Did you manage to get lineage to run?
Sent from my Lenovo PB2-650Y using Tapatalk

frankbonatelli said:
Did you manage to get lineage to run?
Sent from my Lenovo PB2-650Y using Tapatalk
Click to expand...
Click to collapse
didn't even try.
it's my majn phone still so not really wanna mess with it. still to lazy to flash RR on my redmi note 3

frankbonatelli said:
Did you manage to get lineage to run?
Sent from my Lenovo PB2-650Y using Tapatalk
Click to expand...
Click to collapse
still not switch phone? any one got any updates on the roms??? like this forum is dead.././

Custom rom for lenovo pb2-650m
I request the developers to provide custom rom for lenovo pb2-650m.

subal kumar mahato01 said:
I request the developers to provide custom rom for lenovo pb2-650m.
Click to expand...
Click to collapse
it are the same phones anyway i just cant figur out the unlock and twrp flash

subal kumar mahato01 said:
I request the developers to provide custom rom for lenovo pb2-650m.
Click to expand...
Click to collapse
Were you able to find any custom rom for lenovo pb2-650m?

Fix for Honor 8 Lite Soft-Brick (PRA-LA1)

Okay so I was trying out a new ROM for my phone but the SIM wasn't working. I flashed a different ROM but the phone got soft-bricked. I can't load any ROM now.
I tried flashing different stock ROMs two times but still the phone is stuck on "Your phone is booting now..." screen. ( I did this via fastboot flash boot + recovery + system).
I can flash TWRP just fine and flash different ROMs from it but I can't boot into any of them.
Just a sidenote, I did an advanced wipe in TWRP on all storages except MicroSD Card ( Data + System + Vendor + Product ). I dont know if this detail is important or not.
Kindly reply with a fix.

Restore your phone with HiSuite maybe helps.

sky0hjh said:
Restore your phone with HiSuite maybe helps.
Click to expand...
Click to collapse
Tried that. No luck.

fam4792 said:
Okay so I was trying out a new ROM for my phone but the SIM wasn't working. I flashed a different ROM but the phone got soft-bricked. I can't load any ROM now.
I tried flashing different stock ROMs two times but still the phone is stuck on "Your phone is booting now..." screen. ( I did this via fastboot flash boot + recovery + system).
I can flash TWRP just fine and flash different ROMs from it but I can't boot into any of them.
Just a sidenote, I did an advanced wipe in TWRP on all storages except MicroSD Card ( Data + System + Vendor + Product ). I dont know if this detail is important or not.
Kindly reply with a fix.
Click to expand...
Click to collapse
Which stoc firmware number you tried??

hassanjavaid8181 said:
Which stoc firmware number you tried??
Click to expand...
Click to collapse
PRA-LA1C185B167 and PRA-LA1C10B160
fount them herehttps://romfirmware.com/2017/08/03/huawei-p8-lite-2017-huawei-honor-8-lite-pra-la1/.

fam4792 said:
PRA-LA1C185B167 and PRA-LA1C10B160
fount them herehttps://romfirmware.com/2017/08/03/huawei-p8-lite-2017-huawei-honor-8-lite-pra-la1/.
Click to expand...
Click to collapse
Which firmware you were on before issue??
---------- Post added at 07:03 PM ---------- Previous post was at 07:02 PM ----------
Your model number
Model number..

hassanjavaid8181 said:
Which firmware you were on before issue??
---------- Post added at 07:03 PM ---------- Previous post was at 07:02 PM ----------
Your model number
Model number..
Click to expand...
Click to collapse
Sorry dude. I have no idea. All I know is that the model is PRA-LA1

fam4792 said:
Okay so I was trying out a new ROM for my phone but the SIM wasn't working. I flashed a different ROM but the phone got soft-bricked. I can't load any ROM now.
I tried flashing different stock ROMs two times but still the phone is stuck on "Your phone is booting now..." screen. ( I did this via fastboot flash boot + recovery + system).
I can flash TWRP just fine and flash different ROMs from it but I can't boot into any of them.
Just a sidenote, I did an advanced wipe in TWRP on all storages except MicroSD Card ( Data + System + Vendor + Product ). I dont know if this detail is important or not.
Kindly reply with a fix.
Click to expand...
Click to collapse
my phone is PRALA1 too. most likely you were on emui5.1 and if so, flash hassan's elite rom. follow EVERYTHING he posted. that worked for me. also do not post in the dev forum. if you have questions please direct it in the q&a forum of this device.

Try to flash vendor,Product, boot, recovery & System..
i hope ur problem will be resolved.

reconnaissance said:
my phone is PRALA1 too. most likely you were on emui5.1 and if so, flash hassan's elite rom. follow EVERYTHING he posted. that worked for me. also do not post in the dev forum. if you have questions please direct it in the q&a forum of this device.
Click to expand...
Click to collapse
Thanks a lot dude. It worked.

Need rwrp
My phone is gr3 2017 it's the same phone with the model number PRA-LA1 and i couldn't find the twrp for this device
I already unlocked the bootloader

aymen997 said:
My phone is gr3 2017 it's the same phone with the model number PRA-LA1 and i couldn't find the twrp for this device
I already unlocked the bootloader
Click to expand...
Click to collapse
Think its honor 6x go to 6x forum and use latest twrp by hassan

Susan Dahal said:
Think its honor 6x go to 6x forum and use latest twrp by hassan
Click to expand...
Click to collapse
Honor 6x is the gr5 2017 but it has the same chipset as the gr3 2017 ( kirin 655) so will that twrp work for my phone?

aymen997 said:
Honor 6x is the gr5 2017 but it has the same chipset as the gr3 2017 ( kirin 655) so will that twrp work for my phone?
Click to expand...
Click to collapse
Yes it will

Please help! I need to relock my bootloader.

Hey guys, how are you? So, let me explain my situation - I have a Redmi 7A (the 16 GB version) and I recently unlocked its bootloader to root, and uninstall some bloatwares ...... I managed to unlock the bootloader and install TWRP recovery, but I was unable to root, and i tried in a lot of ways, in a lot of times........... I'm on version 11.0.6 of MIUI, and I saw that some users here were having problems with this version too. Anyway, recently a MIUI update came out, and soon it will update to MIUI 12, but I'm not able to install the OTA update, after the phone restarts, it goes to TWRP recovery and shows an error message - so, I would like to go back to my original recovery and re-lock my bootloader, but for that I need the original recovery of the Redmi 7A, and I can't find it anywhere........
Someone here have this original recovery available to send or do upload? It would help me a lot! Thanks

eriksparks1 said:
Hey guys, how are you? So, let me explain my situation - I have a Redmi 7A (the 16 GB version) and I recently unlocked its bootloader to root, and uninstall some bloatwares ...... I managed to unlock the bootloader and install TWRP recovery, but I was unable to root, and i tried in a lot of ways, in a lot of times........... I'm on version 11.0.6 of MIUI, and I saw that some users here were having problems with this version too. Anyway, recently a MIUI update came out, and soon it will update to MIUI 12, but I'm not able to install the OTA update, after the phone restarts, it goes to TWRP recovery and shows an error message - so, I would like to go back to my original recovery and re-lock my bootloader, but for that I need the original recovery of the Redmi 7A, and I can't find it anywhere........
Someone here have this original recovery available to send or do upload? It would help me a lot! Thanks
Click to expand...
Click to collapse
I have detailed instructions - How to install TWRP + ROOT [Magisk] for redmi 7A HERE. Very easy. Please use google translate

sjcbank said:
I have detailed instructions - How to install TWRP + ROOT [Magisk] for redmi 7A HERE. Very easy. Please use google translate
Click to expand...
Click to collapse
Hi! I tried that way, but when i use the patched boot.img, it doesn't boot, and go straight to TWRP :/

eriksparks1 said:
Hi! I tried that way, but when i use the patched boot.img, it doesn't boot, and go straight to TWRP :/
Click to expand...
Click to collapse
If you can't do it, look down and read lesson #3, download ROM zip and txt files for flash via twrp. will definitely work 100%

eriksparks1 said:
Hi! I tried that way, but when i use the patched boot.img, it doesn't boot, and go straight to TWRP :/
Click to expand...
Click to collapse
Soo... I have problem too with root and I make temp root (unsafe method) . Patching boot img is idiot idea now , same as re-lock bootloader . I'm DEV and i'm know (look on my threads if you don't think). Better idea for you is download global rom or rom designed for your region . Actually i wipe my global rom and I install rom with android 10 . I have english only without polish support . All rom's is here : https://mirom.ezbox.idv.tw/en/phone/pine/ If you want to unbrick your device , download correct rom , and flash . For your bricked device is only fastboot rom for unbrick . In google you find how to install adb and fastboot drivers , disable check signatures of drivers in your windows , adb and fastboot exe file (if you have windows as me) etc. . Good luck . Disclaimer: After re-lock bootloader , your software and data be bricked , you must flash all with data too . Make copy of data to google or sd card
---------- Post added at 06:04 AM ---------- Previous post was at 05:58 AM ----------
https://flashxiaomi.com/download-install-miui-rom-for-xiaomi-redmi-7a-all-miui-firmwares/
---------- Post added at 06:15 AM ---------- Previous post was at 06:04 AM ----------
https://xiaomifirmwareupdater.com/miui/pine/