The firmware update for the Galaxy tab s2 SM-T715Y is now out. If after attempting to download via OTA does not work, Go over to sammobile for the download or use Smartswitch to download the update. I used smartswitch with the steps below:
1. Download the Smartswitch software to your PC
2. Connect your tab to the pc. The smartswitch software should indicate that an update is available
3. Download the update. Mine was 1500MB in size
Cheers!
abycharlie said:
The firmware update for the Galaxy tab s2 SM-T715Y is now out. If after attempting to download via OTA does not work, Go over to sammobile for the download or use Smartswitch to download the update. I used smartswitch with the steps below:
1. Download the Smartswitch software to your PC
2. Connect your tab to the pc. The smartswitch software should indicate that an update is available
3. Download the update. Mine was 1500MB in size
Cheers!
Click to expand...
Click to collapse
I used smart switch.
Clean and reliable.
Thanks.
noted, thanks a lot, going to do it now.
Thanks
Related
I own a rooted Galaxy S4.
I would like to upgrade firmware using:
Settings -> General -> Device Info -> Software upgrades -> Update.
After resetting flash counter and using Triangle Away workaround to make the phone able to download latest firmware from Samsung's server, I'm able to start the upgrade procedure.
Firmware is downloaded, I chose to upgrade frmware and reboot the phone, but then nothing happens, no firmware upgrade is installed.
Is there a solution?
TIA
If u rooted ur phone u dont gona be able to install OTA updates how u are trying it. But u can:
1. This update will be a .zip file. You need flash this file by STOCK RECOVERY
or
2. Conect to Kies (android 4.2.2) or Kies 3 (android 4.3) and update it for there :highfive:
Joku1981 said:
If u rooted ur phone u dont gona be able to install OTA updates how u are trying it. But u can:
1. This update will be a .zip file. You need flash this file by STOCK RECOVERY
or
2. Conect to Kies (android 4.2.2) or Kies 3 (android 4.3) and update it for there :highfive:
Click to expand...
Click to collapse
Thank you for your answer.
Do you mean that I'm unable to use OTA upgrade also using Triangle Away workarounds?
There is a specific workaround used to make the phone able to connect to Samsung servers and download firmware upgrades: Triangle Away disables Superuser for a few minutes so you can use OTA upgrade function.
Kies behavior is the same: it downloads the firmware, but then the upgrade isn't applied.
Before install firmware upgrade by stock recovery or Odin, I would like to discover if there is a way to upgrade it by Kies or OTA.
cinciopillo said:
Thank you for your answer.
Do you mean that I'm unable to use OTA upgrade also using Triangle Away workarounds?
There is a specific workaround used to make the phone able to connect to Samsung servers and download firmware upgrades: Triangle Away disables Superuser for a few minutes so you can use OTA upgrade function.
Kis behavior is the same: it downloads the firmware, but then the upgrade isn't applied.
Before install firmware upgrade by stock recovery or Odin, I would like to discover if there is a way to upgrade it by Kies or OTA.
Click to expand...
Click to collapse
Try step 1
* EDIT: Select the last option in recovery
or
Put the .zip file to your external SD Card. Use 2nd option and install it
* EDIT 2: I have rooted phone too but I always update my phone with Kies 3. I dunno what will be ur problem that it doesnt install updates
Joku1981 said:
Try step 1
* EDIT: Select the last option in recovery
or
Put the .zip file to your external SD Card. Use 2nd option and install it
Click to expand...
Click to collapse
thanks a lot.
Joku1981 said:
Try step 1
* EDIT: Select the last option in recovery
or
Put the .zip file to your external SD Card. Use 2nd option and install it
* EDIT 2: I have rooted phone too but I always update my phone with Kies 3. I dunno what will be ur problem that it doesnt install updates
Click to expand...
Click to collapse
I use Kies (not Kies 3) because of my phone has still Android 4.2 installed (kies 3 AFAIK works with Android 4.3).
cinciopillo said:
I use Kies (not Kies 3) because of my phone has still Android 4.2 installed (kies 3 AFAIK works with Android 4.3).
Click to expand...
Click to collapse
Yes? Did u read my first post in this thread then?
So my phone have an update about 1gb and I just finished download it
But when I flash it via Odin I get this error ( see attachment)
And my phone show Secure check fail : aboot
Do I have to unroot my phone before using Odin
Syaoran Lord said:
So my phone have an update about 1gb and I just finished download it
But when I flash it via Odin I get this error ( see attachment)
And my phone show Secure check fail : aboot
Do I have to unroot my phone before using Odin
Click to expand...
Click to collapse
Are you sure you're updating the same baseband version?
where did you download it?
I download it via Sammobile
I just check it,it had 2 PDA version and I didn't know. one can update by Kies,one can't
Thank you so much
Syaoran Lord said:
I download it via Sammobile
I just check it,it had 2 PDA version and I didn't know. one can update by Kies,one can't
Thank you so much
Click to expand...
Click to collapse
Try using kies version its works fine in my SM-G530M
pd i also installed the lastest firmware (in my case G530MUBU1AOF1) with odin 3.07 grand prime mohan
FLASHING NEW FIRMWARE
VIDEO: Flash Stock Firmware on Galaxy S6 with Odin
1. Download a firmware with a baseband version supported by pingpong root from http://www.sammobile.com/firmwares/
Supported baseband versions:
Samsung Galaxy S6 with following ROM versions:
G9200ZCU1AOD5
G9200ZHU1AOD3
G9200ZHU1AOD9
G920R4TYU1AOD3
G920IDVU1AOD1
G920FXXU1AOCV
G920PVPU1AOCF
G920TUVU1AOCG
G920VVRU1AOC3
G920FXXU1AOBN
G920FXXU1AODG
G9209KEU1AOCI
G9209KEU1AODA
G9208ZMU1AOD5
G9208ZMU1AOCI
G920FXXU1AOD9
G920AUCU1AOCE
G920FXXU1AODE
G9200ZCU1AOD9
G920W8VLU1AOCG
G920FXXU1AOD4
G920R4TYU1AOCB
***new*** Use Download Data!
G920FXXU1AOCY
G920IDVU1AOC4
G920FXXU1AODI
G9209KEU1AOD5
G920IDVU1AOBQ
G9208ZTU1AOD9
G920FXXU1AOE3
G920IDVU1AOE3
G920FXXU1AOD8
G920FXXU1AOE4
G920AUCU1AOE2
G920T1UVU1AOCH
G9208ZTU1AOCI
G920IDVU1AOC6
G920IDVU1AOD3
G920FXXU1AOCZ
G920AZTUU1AOD1
G9200ZHU1AOE4
G9200ZCU1AOE4
G920KKKU1AODC
G920IDVU1AOE4
G920LKLU1AODC
G920SKSU1AODC
G920IDVU1BOE2
G9208ZTU1AOE4
G920PVPU1AOE2
G920W8VLU1AOE1
G920VVRU1AOE2
SC04GOMU1AOE1
Samsung Galaxy S6 Edge with following ROM versions:
G9250ZCU1AODC
G925VVRU1AOC3
G925FXXU1AOD9
G925PVPU1AOCF
G925FXXU1AOCV
G925AUCU1AOCE
G925TUVU1AOCG
G925W8VLU1AOCG
G925IDVU1AOD1
G925SKSU1AOD5
***new*** Use Download Data!
G925FXXU1AOD4
G925R4TYU1AOD3
G925FXXU1AODG
G925FXXU1AOCZ
G925IDVU1AOD3
G925LKLU1AOD8
G925SKSU1AOD8
G925FXXU1AOE3
G925PVPU1AOE2
G925FXXU1AOD8
G9250ZTU1AODC
G925FXXU1AOE4
G925AUCU1AOE2
G925TUVU1COE6
G925FXXU1AOCY
G9250ZTU1AOE4 (5/11 kernel, seems not fixed yet, please test)
G925R4TYU1AOE2
SCV31KDU1AOCP (Japan version of S6E?)
G9250ZCU1AOCH
G9250ZCU1AOE4
G925IDVU1AOE4
G925IDVU1BOE1
G925LKLU1AODC
G925IDVU1AOE3
G925IDVU1AOE2
G925KKKU1AODC
G925SKSU1AODC
G925W8VLU1AOE1
G925VVRU1AOE2
G925R7WWU1AOE3
2. Download the necessary drivers and Odin (Link is provided below)
-SAMSUNG_USB_Driver_for_Mobile_Phones.exe
-Samsung Kies
-Odin3_v3.10.6.zip
3. Extract the firmware you downloaded since its a zip file
3.1 Extract Odin3_v3.10.6.zip as well
3.2 Install SAMSUNG_USB_Driver_for_Mobile_Phones.exe and Samsung Kies
4. Open "Odin3_v3.10.6.exe"
4.1 Click "AP"
4.2 Select the firmware you downloaded and wait for Odin to finish uploading the file
5. Turn off your phone (if its on)
5.1 Hold Home Button+Volume Down Button+Power Button and wait until a message appears
5.2 Press Volume Up Button
5.3 Connect your phone to your computer and press "Start"(Odin)
Note: Don't turn off your computer and phone
ROOTING
VIDEO: Root the Galaxy S6 (Edge) All Variants, No Knox Trip
6. Download "PingPongRoot" or you can just click here
7. Install "PingPongRoot" and "SuperSU"
8. Open "PingPongRoot" and click "Get root"
Note: Videos and links are not mine
So i just received a new galaxy s5 and I would like to root if possible. I've seached and it all seems a little confusing. Its an s5 running 6.0.1. Please point me in the right direction if there is a safe rooting method that will still work. I can provide any other information as well. Thank you for your support!
Make a backup in using Samsung smartswitch or Samsung kies 3
Download odin off the Internet
Go to Samsung website and download USB drivers for s5 verizon
Go to Sammobile. Com and download ok3 or pb1 firmware
Boot phone into download mode
Connect phone to pc by USB cable
Open odin in Odin click ap/pda and choose the firmware you downloaded from sammobile. Com and click start
Then wait for your phone to boot if it gets stuck longer than ten minutes boot into recovery and wipe data and cache and reboot
Set up phone once it boots
To get root go to JrKruse ok3 root method on xda under s5 Verizon section
[email protected] said:
Make a backup in using Samsung smartswitch or Samsung kies 3
Download odin off the Internet
Go to Samsung website and download USB drivers for s5 verizon
Go to Sammobile. Com and download ok3 or pb1 firmware
Boot phone into download mode
Connect phone to pc by USB cable
Open odin in Odin click ap/pda and choose the firmware you downloaded from sammobile. Com and click start
Then wait for your phone to boot if it gets stuck longer than ten minutes boot into recovery and wipe data and cache and reboot
Set up phone once it boots
To get root go to JrKruse ok3 root method on xda under s5 Verizon section
Click to expand...
Click to collapse
Do i need the reactivation lock off to do this? Or is it ok with that setting on?
Because like most of you guys know i cant do that on this phone
thats why i want to root to try to get that lock off
Im currently on android 5.0 with OG5 baseband
Thanks
Turning off reactivation lock is not required for root
[email protected] said:
Turning off reactivation lock is not required for root
Click to expand...
Click to collapse
All right thanks ill try tomorrow
Correction As long as you can turn accept the USB debugging always prompt
Sent from my SM-G900V using Tapatalk
To install it, simply download the firmware file from the official Samsung firmware section link that is given below and then use this new version of Odin that you can download from XDA.
Here are the link:
Oreo Firmware for S7 Edge (SM-G935F):*
https://www.sammobile.com/firmwares/...U2ERD5/217550/
Oreo Firmware for S7 (SM-G930F):
https://www.sammobile.com/firmwares/...U2ERD5/217727/
Odin Version 3.13.1:
https://forum.xda-developers.com/gal...o-fws-t3755957
Download the firmware as based on the model number of your device (i.e. SM-G935F / SM-G930F) and download the odin file.
Turn on your device in download mode and then connect to your PC. Run the Odin and select the based on the sections given in it (i.e. BL, AP, CP and HomeCSC).
After selecting these files click on the start button and let it complete. After completion your device will restart several time and you are done with installing the Official Oreo on your device that won't trigger the knox.
Enjoy!
MisterX01X said:
To install it, simply download the firmware file from the official Samsung firmware section link that is given below and then use this new version of Odin that you can download from XDA.
Here are the link:
Oreo Firmware for S7 Edge (SM-G935F):*
https://www.sammobile.com/firmwares/...U2ERD5/217550/
Oreo Firmware for S7 (SM-G930F):
https://www.sammobile.com/firmwares/...U2ERD5/217727/
Odin Version 3.13.1:
https://forum.xda-developers.com/gal...o-fws-t3755957
Download the firmware as based on the model number of your device (i.e. SM-G935F / SM-G930F) and download the odin file.
Turn on your device in download mode and then connect to your PC. Run the Odin and select the based on the sections given in it (i.e. BL, AP, CP and HomeCSC).
After selecting these files click on the start button and let it complete. After completion your device will restart several time and you are done with installing the Official Oreo on your device that won't trigger the knox.
Enjoy!
Click to expand...
Click to collapse
Did I have to flash all of those files
Could I can to flash without HomeCSC
Because I am in different country????
Abo_Moaaz said:
Did I have to flash all of those files
Could I can to flash without HomeCSC
Because I am in different country????
Click to expand...
Click to collapse
Yes you have to flash the HomeCSC because that's what I did. Or else you to wait until Samsung release Oreo for your country.