both my ON5's (SM-G550T & SM-G550T1) stuck on Custom binary Blocked by FRP lock!! - Samsung Galaxy On5 Questions & Answers

I cant seem to figure out how to fix this issue... "Custom Binary Blocked by FRP lock." The firmware I used to bypass the account verification originally fail in odin now.. and then the phone says "Secure Check Fail: (Bootloader)" while in download mode.
And here's the log from odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G5500ZCU1APK1_G5500CHC1APK1_G5500ZCU1APK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Has anyone else had this issue..??

fixed it with these updato. com/firmware-archive-select-model?exact=1&q=SM-G550T1

Related

[Solved] Help fast please i got stuck in odin

I downloaded the new firmware from sammobile. Everything was ok but then odin got stucked in system.img and after a while it said that it had failed. What should i do now?
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500UBUBMG1_I9500UUBBMG1_I9500UBUBMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> __XmitData_Read ..
<ID:0/004> XmitData Fail..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I could find the solution myself, sorry for creating the thread i was in real panic. Aparently kies was interrupting odin, lesson learned. I should have uninstalled kies before.
Gab! said:
I downloaded the new firmware from sammobile. Everything was ok but then odin got stucked in system.img and after a while it said that it had failed. What should i do now?
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500UBUBMG1_I9500UUBBMG1_I9500UBUBMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> __XmitData_Read ..
<ID:0/004> XmitData Fail..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Since Its done in the thread make it solved in the bracket it will help others too
.
did you check the md5 checksum on that? perhaps it's a bad download..
also, you should tick debug

NOTE 4 SM-G910S bootloop after attempt to use CF-autoroot

Hello, my phone stocked on bootloop and i try to flash it to stock firmware and odin fails
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also try to factory reset it and it is still in bootloop
Please someone help me. Thanks a lot
louellgat said:
Hello, my phone stocked on bootloop and i try to flash it to stock firmware and odin fails
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also try to factory reset it and it is still in bootloop
Please someone help me. Thanks a lot
Click to expand...
Click to collapse
Hi,
I have reported this thread to be moved to the right Q & A section where you might be able to get help quickly.
Good luck.

galaxy s5 g900f root failure.

sup people, so i've been trying to root my s5 using this file "CF-Auto-Root-klte-kltexx-smg900f.tar" and whenever i try i get the same message which is:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-klte-kltexx-smg900f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any idea how to fix this?
Follow these instructions
http://forum.xda-developers.com/gal...ow-to-root-t3300316/post64961009#post64961009

Help with flashing stock firmware over re-activation locked Samsung SM-G900A

Hey guys, I'm trying to reinstall stock firmware on to device so I can bypass the Reactivation Lock but I'm having a bit of trouble, I keep continually getting the error SYS REV CHECK FAIL[S[ : Refer 3 > Binary 1. I've tried doing everything I could find and nothing has helped, does anyone have any insight, thanks! Also here's the LOG from ODIN
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Odin fails to root after recovery.img

I've been searching for 3 days now and I haven't seen anyone with the same problem. I've tried everything I can think of. I have disabled reactivation lock. Every time I see someone with the same error the problem is they need to disable reactivation lock and it always works.
Here's the error I get:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-kltevzw-kltevzw-smg900v.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I Have tried every single USB port on my computer, and it still doesn't work. I have NO idea what to do!
(I have SM-G900V and I'm using CF-Auto-root)
SM-G900V has a locked bootloader by default.
It does not accept custom recovery.
have NO idea what to do!
Click to expand...
Click to collapse
Have a look at the section devoted to SM-G900V.

Categories

Resources