TWRP not booting system - Lenovo Vibe K4 Note Questions & Answers

I tried to factory reset a custom ROM, got sent to TWRP then I can't reboot to system from there. Tried a clean install but to no avail. I've looked around on the internet and I think I have to reinstall stock ROM and then reinstall custom recovery and ROM, except if I were to install the stock ROM once again (with sp tools) I need my phone to be turned off, not in recovery mode. So how exactly should I proceed now?
EDIT: Managed to get rid of the TWRP bootloop by restoring from a stock nandroid I've found on the forums, coupled with flashing a stock recovery image using TWRP. Reunlocked bootloader, flashed TWRP all over again and then flashed custom ROM and Gapps. Everything running fine now.
Mods feel free to delete this post since it's solved itself, or leave it in case anyone needed help concerning the same issue, up to you.

Hi
Bibi if you’re still active on xda reply to this

Help me i got same issue with you. Can provide me with ur stock rom and stock recovery? And how to do. Thanks very much.
Bibicp said:
I tried to factory reset a custom ROM, got sent to TWRP then I can't reboot to system from there. Tried a clean install but to no avail. I've looked around on the internet and I think I have to reinstall stock ROM and then reinstall custom recovery and ROM, except if I were to install the stock ROM once again (with sp tools) I need my phone to be turned off, not in recovery mode. So how exactly should I proceed now?
EDIT: Managed to get rid of the TWRP bootloop by restoring from a stock nandroid I've found on the forums, coupled with flashing a stock recovery image using TWRP. Reunlocked bootloader, flashed TWRP all over again and then flashed custom ROM and Gapps. Everything running fine now.
Mods feel free to delete this post since it's solved itself, or leave it in case anyone needed help concerning the same issue, up to you.
Click to expand...
Click to collapse

Bibicp said:
I tried to factory reset a custom ROM, got sent to TWRP then I can't reboot to system from there. Tried a clean install but to no avail. I've looked around on the internet and I think I have to reinstall stock ROM and then reinstall custom recovery and ROM, except if I were to install the stock ROM once again (with sp tools) I need my phone to be turned off, not in recovery mode. So how exactly should I proceed now?
EDIT: Managed to get rid of the TWRP bootloop by restoring from a stock nandroid I've found on the forums, coupled with flashing a stock recovery image using TWRP. Reunlocked bootloader, flashed TWRP all over again and then flashed custom ROM and Gapps. Everything running fine now.
Mods feel free to delete this post since it's solved itself, or leave it in case anyone needed help concerning the same issue, up to you.
Click to expand...
Click to collapse
can you put a link where you find the stock recovery, cos i've restore stock recovery on twrp but my device keep booting to twrp

Related

i9505 doens´t boot after flashing stock firmware

Hello
I was trying to update my friend´s i9505 to the latest AntaresOne CM12 build, but forgot to flash gapps, and since i coulnd´t for some reason enter CWM (the phone just reboots), i had to flash stock firmware over again so i could start over.
But now the phone isn´t booting even on stock firmware. That usually did the trick.
The wierd thing is that Phils Touch Recovery was working before, but ever since i used Triangle Away to reset binary counter, the recovery won´t boot up anymore.
The only way that i could get into Phils Recovery was to install the TWRP recovery installer, and throught the app i would tell it to flash, and it would reboot into Phils Recovery
Now since system isn´t booting, i can´t install and use the TWRP installer to reboot into recovery mode for me.
Tried to flash stock recovery, the same thing happens: the phone just black screens, vibrates and reboots.
Any ideas of why this might be happening?
Go to stock recovery if you can and wipe data/factory reset. Install stock ROM then.
@guguts
As clearly wrote in 1st post of my thread, you need to do "format /system" before installing ROM's builds starting from 26/11 one and latest ones, including 3/12 and the ones that will come in the future.
I strongly suggest you to take a look again at installation instructions, but this time carefully.
If you need anything else, write directly in its Q&A thread (you can find it in this section) where surely you can be helped more and better
Inviato dal mio GT-I9505
Flash a custom recovery with Odin. Uncheck auto-reboot before flashing.
Then boot into the recovery using the botton combo. Keep holding it as long as it takes to enter recovery.
Hey guys, i managed to work it out.
It was probably a loose vol up or home button, because i didn´t do anything but a few moments later i tried to enter stock recovery and it went fine.
The issue was not with the custom rom (which by the way is great, my friend says its running smooth).
The issue happened because i forgot to do i data wipe after installing the rom and prior to installing the stock rom.
So the stock ROM was trying to load using lollipop data and cache, and thats why it got stuck in the samsung logo.
As soon as i managed to enter stock recovery again, and made a data wipe, the stock room booted fine.
So i tried again, but this time didn´t forget to flash gapps, and even better, now Phils Recovery is booting up normally (go figure...)
So i formated /system and /data, flashed AntaresOne ROM and gapps, and everything went fine.
Just posting here in case anyone in the future goes througyht the same hassle.
Thank you so much for your work Antares.
Its people like you, quarx and pawtip (and many others top developers) that makes this community great.

[Q] Custom Recovery Doesn't Work Anymore

Hello,
I've rooted my own note 3 and flashed Temaseks unofficial cm 12 rom. Everything works perfect so I decided to do the same thing for my father. It all went well, first I rooted his phone, then I flashed CWM and flashed cm 12 by temasek. The rom works fine but I forget to install the Gapps. So I tried to install Gapps but I got an error "Failure Status 6". I googled on that error and someone told it has to do something with CWM. I tried to flash a different version of CWM but now I can't reboot into recovery mode anymore. So I can't flash anything.
I flashed another version of CWM but this one also doesn't work. Whenever I try to boot the phone into recovery mode, the blue line shows up. Rebooting into recovery mode, but after a few secs, the phone just boots the normal way. Is there anyone that can help me to get CWM back to work? In the mean time I'll try to flash TWRP by Odin.
Thanks in advance!
So I flashed latest version of CWM: Buildversion; 6.13.0, CWM Base Version V6.0.4.7. I can reboot into recovery now but still can't install Google Apps due to failure status 6. On my own Phone I run a different version of CWM, but when I try to flash it, the phone won't boot into recovery mode anymore. It only boots into recovery when I flash this V6.0.4.7 . How can I get rid of this version and flash an older version of CWM?
You'll probably have to Odin back to stock and start over...
Morningstar said:
You'll probably have to Odin back to stock and start over...
Click to expand...
Click to collapse
You mean If there is no other way to get the Google Apps on the phone, I have to go back to stock. I did make a backup with CWM on the while it was running custom firmware. Now I have 4 files on my comuter, 3.tar and 1.md5 . If I recover them, I will still have this not working CWM version on my phone right? Isn't there a easier way to delete CWM, can I flash TWRP over CWM and see if it will install these Gapps?
Yeah, you should be able to flash TWRP over it. TWRP is much better anyway, in my opinion. Once you get the recovery issue sorted, I really wouldn't't recommend trying to flash just the gapps. It would probably work, but it's also quite likely to cause some weird issues. It's always best to flash gapps immediately after flashing a ROM, without leaving recovery.
I would flash TWRP, wipe everything but your internal SD, re-flash the ROM, flash the gapps, and everything should be cherry.
Edit: here is the link to download TWRP.
Morningstar said:
Yeah, you should be able to flash TWRP over it. TWRP is much better anyway, in my opinion. Once you get the recovery issue sorted, I really wouldn't't recommend trying to flash just the gapps. It would probably work, but it's also quite likely to cause some weird issues. It's always best to flash gapps immediately after flashing a ROM, without leaving recovery.
I would flash TWRP, wipe everything but your internal SD, re-flash the ROM, flash the gapps, and everything should be cherry.
Edit: here is the link to download TWRP.
Click to expand...
Click to collapse
I appreciate your effort, thank you. The recovery issue is solved. I flashed Chainfires Root script and that installed the stock recovery. However, when I tried to install and older CWM version I got back in the recovery reboot cycle. But once I installed the latest CWM it booted in recovery. So I flashed Chainfires Root once again and had the stock recovery back. From there on I tried to install TWRP but got the recovery boot cycle again. My phone is now running android 5.0.2 and I think that's the problem.... :S I'll try again to flash Chainfires Root script to get the stock recovery back. From there on I will try to flash the link you gave to me with Odin and hope that will fix it. Do you have any ideas on what I'm doing wrong?
Your version of TWRP works so far. It reboots into RecoveryMode. Now I'll wipe and try to install Temaseks Cm 12 followed by Gapps! Thanks so far!
Okay, it's solved. Can't thank you enough for you help. Bless you!!
No problem. Glad you got it figured out!
[emoji106]

[Q] N910G won't boot after TWRP restore?

Hi All,
Just wondering what's going on with my phone - it's a Galaxy Note 4 SM-N910G with Optus Australia.
Here's the situation:
I rooted my phone using Chainfire method from 5.1.1 Optus firmware.
Then, I installed TWRP, backed up all partitions (INCLUDING EFS).
After that, installed Cyanogenmod. Holy damn, I need to go back to stock...
so...
I booted back into TWRP
I reset phone as usually would to restore/install ROM.
I restored firmware backup in TWRP.
Reboot to system
-- BOOTLOOP --
happens every time i try to restore, and the only way I can use my phone right now is to reflash Cyanogenmod 12.1 nightlies onto it - which have problems (such as I cannot reboot with CM12.1 because if I do after installing it, the phone app breaks and I cannot get past anything because of toast message "com.android.phone" has stopped..., so then only way to get it to work again is to reflash CM12.1 again - this happens about twice daily...)
-- -- PLEASE HELP!
What happens to TWRP backups that mean i cannot restore my stock backup without it bootlooping? and why can devs not post a clean stock flashable ZIP copy of stock firmwares? Its great having all these mods, but how about something that doesn't require umpteen thousand bloody applications to reflash your phone with? Whatever happened to a simple ZIP? when I see ZIPs, devs see thanks buttons being pushed!
-- THANKS
MrDhark32 said:
Hi All,
Just wondering what's going on with my phone - it's a Galaxy Note 4 SM-N910G with Optus Australia.
Here's the situation:
I rooted my phone using Chainfire method from 5.1.1 Optus firmware.
Then, I installed TWRP, backed up all partitions (INCLUDING EFS).
After that, installed Cyanogenmod. Holy damn, I need to go back to stock...
so...
I booted back into TWRP
I reset phone as usually would to restore/install ROM.
I restored firmware backup in TWRP.
Reboot to system
-- BOOTLOOP --
happens every time i try to restore, and the only way I can use my phone right now is to reflash Cyanogenmod 12.1 nightlies onto it - which have problems (such as I cannot reboot with CM12.1 because if I do after installing it, the phone app breaks and I cannot get past anything because of toast message "com.android.phone" has stopped..., so then only way to get it to work again is to reflash CM12.1 again - this happens about twice daily...)
-- -- PLEASE HELP!
What happens to TWRP backups that mean i cannot restore my stock backup without it bootlooping? and why can devs not post a clean stock flashable ZIP copy of stock firmwares? Its great having all these mods, but how about something that doesn't require umpteen thousand bloody applications to reflash your phone with? Whatever happened to a simple ZIP? when I see ZIPs, devs see thanks buttons being pushed!
-- THANKS
Click to expand...
Click to collapse
This http://forum.xda-developers.com/note-4/help/n910c-to-stock-rom-cm13-t3321132 :good:
One possible solution is to flash the appropriate stock rom via odin. After booting, install twrp and root your phone. After this you can restore your previously saved stock rom via twrp.
MrDhark32 said:
Hi All,
Just wondering what's going on with my phone - it's a Galaxy Note 4 SM-N910G with Optus Australia.
Here's the situation:
I rooted my phone using Chainfire method from 5.1.1 Optus firmware.
Then, I installed TWRP, backed up all partitions (INCLUDING EFS).
After that, installed Cyanogenmod. Holy damn, I need to go back to stock...
so...
I booted back into TWRP
I reset phone as usually would to restore/install ROM.
I restored firmware backup in TWRP.
Reboot to system
-- BOOTLOOP --
happens every time i try to restore, and the only way I can use my phone right now is to reflash Cyanogenmod 12.1 nightlies onto it - which have problems (such as I cannot reboot with CM12.1 because if I do after installing it, the phone app breaks and I cannot get past anything because of toast message "com.android.phone" has stopped..., so then only way to get it to work again is to reflash CM12.1 again - this happens about twice daily...)
-- -- PLEASE HELP!
What happens to TWRP backups that mean i cannot restore my stock backup without it bootlooping? and why can devs not post a clean stock flashable ZIP copy of stock firmwares? Its great having all these mods, but how about something that doesn't require umpteen thousand bloody applications to reflash your phone with? Whatever happened to a simple ZIP? when I see ZIPs, devs see thanks buttons being pushed!
-- THANKS
Click to expand...
Click to collapse
Sorry no help from me but I have a similar problem. At some point mine quit booting to TWRP and I got a huge OTA update a few days ago and every time I try to boot into recovery it ends up in Stock Recovery only after going to little android saying installing updates(it fails & eventually goes to stock recovery.) I did a reset and still have 5.1.1 installed and still have the same behavior.
I have the professional version of the unified toolkit and it says if it is still booting into stock recovery select options 7, 3 which I did but it didn't fix the problem. I think what's getting me is it thinks there are still system updates to install.

Moto x pure XT1575 What am i doing wrong?!

I bought this phone used and the person who had it before me it rooted and installed some of different ROMs on it. After getting my used moto x pure 2015 running android 6.0. I booted it up and tested all the functions (including downloading a few apps) Wi-Fi, camera, audio/charging jacks ext. Everything worked fine. So did normal factory reset (not using TWRP) just to make sure everything was clean before using it as my daily. Then, (BUM BUM BUM!) when I tried to start downloading all my apps. None of them would download even though the Wi-Fi was working. Error 492 I think.
I started trying custom ROMs because I was having two big issues (apps not downloading and incoming call not bringing up accept/decline screen) with my stock rom. and wanted to fix those issues with a fresh stock image.
This is all new to me and has not been as easy as anticipated. If anyone knows a clean factory image I could flash or a fail proof fix to error 492 that would be helpful. I really just want to return to fully working Motorola stock android, but the files I have used haven’t fixed the issue. I have searched for a factory image without finding one…
Is there a way to flash the Motorola image through TRWP?
Otherwise, maybe you can help me with my flashing method, and maybe tell me what I am doing wrong. I tried to flash multiple stock images all with the same issue. I have also tried to flash Resurrection Remix, and Brocken OS, both having resulted in a bootloop. I am starting to think I have done something wrong. The steps I have taken so far have been these:
My bootloader is unlocked status code 3.
My phone is not rooted. Do I need root?
First I downloaded adb and fastboot.
Then I flashed TWRP (3.0.2).
I never installed the official Motorola stock image because flashing it from fast boot wouldn’t work and it couldn’t be flashed with TWRP because it is a .gz not a .zip. (I knew a .gz needs to be flashed with fastboot but I knew TWRP was easer so I didn’t fuss with it)
After flashing TWRP to my phone, I downloaded (yes, I checked the md5) the various ROMs to my computer then transfered them to my phone via micro SD card.
Here are the file’s names if that matters:
moto_x_pure_edition_stock_x1575_mphs24.49-18-3_v1-odexed
(booted and Wi-Fi but play store won’t download apps)
moto_x_pure_edition_stock_x1575_mph24.49-18_v1-odexed
(booted but no Wi-Fi)
Broken-v4.9.1-clark-6.0.1-OFFICIAL-20160824 (with Broken_gapps_lp5.1.x_09172015)
(Brocken was the only non-stock that got past boot, but I still couldn’t get past set up without an error and never made it to the system.)
ResurrectionRemix-N-v5.8.0-20161220-clark (7.1 gapps failed to flash but I booted it anyway.)
(boot loop after both of my tries)
I got Wi-Fi working on one of the above stock ROMs (so I KNOW it works) but couldn’t even turn Wi-Fi on in all the others.
The method I used to flash all of the above files in TWRP was:
Wipe
Full wipe (davlik cache, data, system, cache)
(used for RR and Brocken)
Factory reset (using TWRP) (davlik cache, data , cache)
Used for the stock ROMs or even after flashing .zip file I got the error: no OS installed.
Install
Select file of ROM flash (gapps if needed) and flash
I can’t remember which ones but on some of them after flashing I again did a factory reset.
Then I rebooted
Thanks for reading. Sorry it was so long. I tried to add as much useful information as possible. Hopefully someone smarter than me will see my error(s) and help me get my phone into fully working order.
cont.
I really just want to return to fully working Motorola stock android, but the files I have used haven’t fixed the issue. I have searched for a factory image without finding one…
Is there a way to flash the Motorola image through TRWP?
Otherwise maybe you can help me out with my flashing method and maybe tell me what I am doing wrong. I tried to flash multiple stock images all with the same issue. I have also tried to flash Resurrection Remix, and Brocken OS, both having resulted in a bootloop. I am starting to think I have done something wrong. The steps I have taken so far have been these:
My bootloader is unlocked status code 3.
My phone is not rooted. Do I need root?
First I downloaded adb and fastboot.
Then I flashed TWRP (3.0.2).
I never installed the official Motorola stock image because flashing it from fast boot wouldn’t work and it couldn’t be flashed with TWRP because it is a .gz not a .zip. (I knew a .gz needs to be flashed with fastboot but I knew TWRP was easer so I didn’t fuss with it)
After flashing TWRP to my phone, I downloaded (yes, I checked the md5) the various ROMs to my computer then transfered them to my phone via micro SD card.
Here are the file’s names if that matters:
moto_x_pure_edition_stock_x1575_mphs24.49-18-3_v1-odexed
(booted and Wi-Fi but play store won’t download apps)
moto_x_pure_edition_stock_x1575_mph24.49-18_v1-odexed
(booted but no Wi-Fi)
Broken-v4.9.1-clark-6.0.1-OFFICIAL-20160824 (with Broken_gapps_lp5.1.x_09172015)
(Brocken was the only non-stock that got past boot, but I still couldn’t get past set up without an error and never made it to the system.)
ResurrectionRemix-N-v5.8.0-20161220-clark (7.1 gapps failed to flash but I booted it anyway.)
(boot loop after both of my tries)
I got Wi-Fi working on one of the above stock ROMs (so I KNOW it works) but couldn’t even turn Wi-Fi on in all the others.
The method I used to flash all of the above files in TWRP was:
Wipe
Full wipe (davlik cache, data, system, cache)
(used for RR and Brocken)
Factory reset (using TWRP) (davlik cache, data , cache)
Used for the stock ROMs or even after flashing .zip file I got the error: no OS installed.
Install
Select file of ROM flash (gapps if needed) and flash
I can’t remember which ones but on some of them after flashing I again did a factory reset.
Then I rebooted
Thanks for reading. Sorry it was so long. I tried to add as much useful information as possible. Hopefully someone smarter than me will see my error(s) and help me get my phone into fully working order.
I think this thread will help you: https://forum.xda-developers.com/showthread.php?t=3489110
Sent from my XT1572 using Tapatalk
Install stock firmware via fastboot... if that dont fix the issue, install TWRP make a full wipe, FULL, and install the stock firmware again, eventualy that sould fix the issue.
RK2116 said:
Install stock firmware via fastboot... if that dont fix the issue, install TWRP make a full wipe, FULL, and install the stock firmware again, eventualy that sould fix the issue.
Click to expand...
Click to collapse
I'm having a similar issue. Tried the TruPure rom but I want to switch back to stock. If I do a full wipe, would I be able to use the files that Motorola provides on their website and flash those throught fastboot? Or through TWRP? Any chance you have a link to a guide on how to do the latter option (installing through TWRP)? I'm just trying to get my device back to 100% stock so that I can receive OTA.
cdiaz8 said:
I'm having a similar issue. Tried the TruPure rom but I want to switch back to stock. If I do a full wipe, would I be able to use the files that Motorola provides on their website and flash those throught fastboot? Or through TWRP? Any chance you have a link to a guide on how to do the latter option (installing through TWRP)? I'm just trying to get my device back to 100% stock so that I can receive OTA.
Click to expand...
Click to collapse
Odexed one, install with TWRP, full wipe before doing that, no GApps, just ROM, them, install stock recovery vía fastboot. After that you Will be stock with OTAs.
https://forum.xda-developers.com/mo...t/rom-marshmallow-6-0-september-2016-t3536120
RK2116 said:
Odexed one, install with TWRP, full wipe before doing that, no GApps, just ROM, them, install stock recovery vía fastboot. After that you Will be stock with OTAs.
https://forum.xda-developers.com/mo...t/rom-marshmallow-6-0-september-2016-t3536120
Click to expand...
Click to collapse
Thank you for sharing that link. I think I get it but it seems too easy considering what I've tried so far. Just to make sure I get it:
I should download the odexed rom, go to twrp and wipe data, cache and dalvik then flash the odexed rom through the install function? And thats it? I've literally tried a ton of stuff so if this takes care of it, this is great!
cdiaz8 said:
Thank you for sharing that link. I think I get it but it seems too easy considering what I've tried so far. Just to make sure I get it:
I should download the odexed rom, go to twrp and wipe data, cache and dalvik then flash the odexed rom through the install function? And thats it? I've literally tried a ton of stuff so if this takes care of it, this is great!
Click to expand...
Click to collapse
Yes, also wipe system, make a backup before If you want, but remember, for the OTAs support you need yo flash the stock recovery via fastboot. Good luck.
RK2116 said:
Yes, also wipe system, make a backup before If you want, but remember, for the OTAs support you need yo flash the stock recovery via fastboot. Good luck.
Click to expand...
Click to collapse
This got me back to stock! You are the real MVP.
So I remember seeing a recovery.img file in the factory image that motorola posted on its site. Does it have to be a specific stock recovery or do I need a specific one to match with the file I just installed?
thanks again
cdiaz8 said:
This got me back to stock! You are the real MVP.
So I remember seeing a recovery.img file in the factory image that motorola posted on its site. Does it have to be a specific stock recovery or do I need a specific one to match with the file I just installed?
thanks again
Click to expand...
Click to collapse
Just a stock one, if Motorola have one use that.
RK2116 said:
Just a stock one, if Motorola have one use that.
Click to expand...
Click to collapse
So I'm on stock build 49-18-8 and flashed the recovery from 49-18-3. I went into fastboot and selected recovery. I got the android character with an !
I then did the power button and volume up and got into stock android recovery. Am I supposed to see the android character with ! each time I try to reach the recovery menu? Just wondering if I did this correctly.
Thanks again for pointing me to these resources!
cdiaz8 said:
So I'm on stock build 49-18-8 and flashed the recovery from 49-18-3. I went into fastboot and selected recovery. I got the android character with an !
I then did the power button and volume up and got into stock android recovery. Am I supposed to see the android character with ! each time I try to reach the recovery menu? Just wondering if I did this correctly.
Thanks again for pointing me to these resources!
Click to expand...
Click to collapse
Yes.

Back to stock Nougat?

I have a Moto X Style XT1572 Indian version. I updated it to stock Nougat 7.0 via OTA when it was rolled out in India. Later in January I unlocked the bootloader and installed unofficial TWRP recovery for flashing custom ROMs. I did take a full backup of stock ROM immediately when I installed the recovery. Since then I'm using custom ROMs built for Nougat modem.
At present, how can I go back to stock Nougat? I did do a full wipe (except internal memory) and tried to restore the stock Nougat backup which I took in January. The backup always gets successfully restored. However, when the phone boots up completely and reaches the language selection screen(the first screen when the phone boots up), the phone reboots and goes into a bootloop just displaying the bootloader unlocked screen. The only option I have then is to flash any custom ROM again and they do work perfectly. So what must be restricting the stock backup to boot? Also, is there any other way to go back to stock Nougat?
anyone, please?
AsquareX said:
anyone, please?
Click to expand...
Click to collapse
This thread looks like it has the nougat full firmware package for your phone. Try fastboot flashing all of it: https://forum.xda-developers.com/moto-x-style/general/xt1572firmwareclarkretasiaindiads7-t3735257
If that doesn't work out, here's another trick I've seen work on occasion. Restore your TWRP backup, but do not reboot into it. After restoring the backup, use TWRP to flash stock recovery, then reboot to recovery and do a factory reset with the stock recovery. Then reboot into the stock rom. That can clear up some internal storage problems that hang things up. There are other ways to do it, but this is easiest.
jason2678 said:
This thread looks like it has the nougat full firmware package for your phone. Try fastboot flashing all of it: https://forum.xda-developers.com/moto-x-style/general/xt1572firmwareclarkretasiaindiads7-t3735257
If that doesn't work out, here's another trick I've seen work on occasion. Restore your TWRP backup, but do not reboot into it. After restoring the backup, use TWRP to flash stock recovery, then reboot to recovery and do a factory reset with the stock recovery. Then reboot into the stock rom. That can clear up some internal storage problems that hang things up. There are other ways to do it, but this is easiest.
Click to expand...
Click to collapse
I'll give a try to the fastboot version.

Categories

Resources