Is there a protective sticker over the camera glass I need to peel? The other stickers on my glossy white model were so tight and hard to peel off, it almost seemed they were part of the plastic body. There were no tabs to pull either. Was wondering if the glass over the camera was a sticker or not...
katamari201 said:
Is there a protective sticker over the camera glass I need to peel? The other stickers on my glossy white model were so tight and hard to peel off, it almost seemed they were part of the plastic body. There were no tabs to pull either. Was wondering if the glass over the camera was a sticker or not...
Click to expand...
Click to collapse
On the VZW model, there is a blue sticker around the lens that comes off.
Thanks Devs. From my VZW G2.
Hey guys, I dropped my Note 4 once awhile back and it left a few scratches and dents in the bezel, and some nearly-invisible abrasions on the frame. I used the green scrubby part of a sponge to get the dents and scratches out, but it looks dull on the parts I repaired - any way to get it looking shiny again? And is there any way I could remove the tiny abrasions on my aluminum frame? Thanks guys
Solvol Autosol or an equivalent metal polish.
But go easy and use a test area at the bottom.
My Z008 has got scratches out of nowhere. I always check before placing my phone under pant pockets. Still don't know how come these scratches are appearing. Now looking for a screen guard.
It's the gorilla glass 3 problem, I had the same scratches on my galaxy s5,so I got a tempered glass which is allot better in terms of micro scratches.
But fear not it's not the actual glass that is being scratched but the nano coating on top of the glass which is used to give a soft slide feeling, that's why you only see then with the screen off and from an angle.
The camera lens also gets scratched pretty easily, ad the glossy black plastic frame around the screen also develops small dents even if my phone is in a Ringke case.
I guess they really had to cut corners to give good specs at a cheap price.
DonMigs85 said:
The camera lens also gets scratched pretty easily, ad the glossy black plastic frame around the screen also develops small dents even if my phone is in a Ringke case.
I guess they really had to cut corners to give good specs at a cheap price.
Click to expand...
Click to collapse
Same here. the black bezel is easy scratched . I already have alot of scratches on my screen and almost 70 % on my camera lens. I only have my phone for 2 months . And got a case for it after 2 weeks.
Siddk007 said:
My Z008 has got scratches out of nowhere. I always check before placing my phone under pant pockets. Still don't know how come these scratches are appearing. Now looking for a screen guard.
Click to expand...
Click to collapse
With original zen cover no scratches, both zcreen and camera lens. Only a little scratch from wife's dimond earring near front cam, she forget to close cover before phone call, so for me filmscreen is waste of money and touch felling, useless
Apparently all material very soft. Frame around screen really soft.
jason4962 said:
Same here. the black bezel is easy scratched . I already have alot of scratches on my screen and almost 70 % on my camera lens. I only have my phone for 2 months . And got a case for it after 2 weeks.
Click to expand...
Click to collapse
I have had my phone since mid July and no scratches, black bezel around camera lens still perfect. Phone goes into my pocket every day. I use a dedicated pocket ie: nothing else goes in that pocket.
With the inexpensive Ringke case Impossible to scratch camera bezel or lens when placing phone on its back as it is then inset. For people that carry stuff in pocket with the phone I am sure a case would help prevent scratches. $200 or $300 for the phone spend $10.99 for a case. Lots of people must be buying the case as price has gone up several dollars since I got it.
Tempered Glass protector
If you all are experiencing these micro scratches, it's sort of an inevitable thing. Gorilla glass scratches with grains of sand or little things from your pocket. If you're really worried about your phone, you can purchase a tempered glass screen protector, and a case to fully protect your device!
Case and tempered glass screen protector are a must. Added them as soon as I took my zen out the box
Tempered glass save my screen from crack also.
Even glass broken, but my phone screen is protected.
I've had no issues other then dropping and breaking the screen but the repair guys told me this phone for the cost is really well built with easy repairability
Sent from my ASUS_Z00AD using XDA Free mobile app
I quit using a case months ago (cheap crappy pleather wallet case I bought for it just irritates me, and my wife pinched my clear soft gel case). No scratches on screen, one or two minor dents on the black plastic edges but you'd need a magnifying glass to notice them. Very pleased - my previous phone (black slate iPhone 5) got scratches on it if you as much as looked at it, and silver scratches on slate iodised aluminium looked bloody awful.
i have a cover and dont worry about scratch )
Yea same problem got alot of faint scratches out of nowhere threw a tempered glass on
Have quie a few phones and tablets, every one since the Samsung Galaxy S3 has had a tempered glass screen protector installed.
I know this phone is supposed to be cheap in comparison with say, the note 5, but I don't have around $500AUD to throw away just because I cracked the screen, even $200 to repair is a kick in the nuts....
Those glass protectors have helped a lot of my phones survive intact.
I don't care if I don't notice the scratches when the screen is on.
For those hoping miracles on gorilla glass:
Diamonds only can be scratched by diamonds
Sapphire only can be scratched by sapphire or diamonds
Gorrillaglass can be scratched by the diamonds, sapphire or whatever is harder than GorillaGlass, this is the rule.
Where you can find things harder than gorilla glass?
a Jewelry ? sure,
the floor? - maybe, some dirt particles actually are are sand, in some places sand is composed by limestone someties harder than gorillaglass.
your pockets? very likely specially if you have two cellphones, the sapphire cover on the lens camera easy can scratch the gorillaglass on other phone, also some pencils have diamond particles on its graphite, further DIAMONDS PARTICLES ARE VERY COMMON, SINCE SiNTETIC DIAMONDS ARE USE AS ABRASIVE ON MANY DRILLING TOOLS.
So, protect your gorillaglass if you hate scratches, harder is not warranty to be invulnerable.
i got one super cheap, but it is all scratched to hell. it isn't really worth much to me, so i was thinking maybe it would be possible to remove that crappy beveled plastic covering the entire front of the phone. anything think it is fused to the lcd panel?
I dropped mine and its smashed the the corner a little. Where its smashed, I can see that its not fused, its a separate part.
Hi,
I have my 6P now for two weeks, and for the looks I'm rocking it only with a screen protector and a white carbon dbrand skin.
So I am pretty careful with the phone.
The problem is that the phone already shows signs of wear, to be more specific:
It already has notches in the plastic between the screen and the camfered edges.
The plastic seems to be very soft. The only possible scenario where I can imagine to picked up the notches is while having it in a car holder(also made out of plastic).
Does anybody else has the same problem?
Can you post a picture of this issue?
wish i could help but like above pics would help as don't know what it could be. Been naked and then to dbrands and have no issues
I can confirm these issues. I'm on my 4th RMA because of this issue. My first device has a chip on the plastic piece by the power button, second device had what looked to be the mate finish wore off and a dead pixel on the display, the third device had the same thing and a strong pink hue on the bottom of the display, and now I'm waiting on my 4th RMA. By the way if this one is messed up I'm going to stick it out with my first device because the display on this device is perfect! You can also see a big difference in the display from the RMA units. The panel looks black when off like my GS6 but the RMA's I've had looked dark grey when off and not black. The plastic piece that sits between the display and metal seems to be an issue Google is tracking so hopefully it gets fixed. I have a white 64gb 6P if that helps. I did have pics of all the issues because I had to send them to Google for proof but I erased them. Sorry
Sent from my Nexus 6P using Tapatalk
brent4atchley said:
Hi,
I have my 6P now for two weeks, and for the looks I'm rocking it only with a screen protector and a white carbon dbrand skin.
So I am pretty careful with the phone.
The problem is that the phone already shows signs of wear, to be more specific:
It already has notches in the plastic between the screen and the camfered edges.
The plastic seems to be very soft. The only possible scenario where I can imagine to picked up the notches is while having it in a car holder(also made out of plastic).
Does anybody else has the same problem?
Click to expand...
Click to collapse
I have this issue with mine. That plastic strip that goes around the screen got rip or broke in my Nexus 6P is flimsy and is coming off. I had my phone from launch week 1. Does warranty cover this? Is some minimum but for my OCD this issue is killing me.
Sent from my Nexus 6P using Tapatalk
The plastic part on my phone came from Google with dents and scuffs in it.
I have this issue also.
The plastic is quite fragile. My damage was caused by the Google nexus 6P case...
Have pics but cant post em because first post.
The black rubber like piece between the glass and case is coming off on my Nexus 6P. I've had the phone in the Genuine Official Nexus 6P Leather Folio Case Flip Cover since almost day one, so I'm a bit surprised after about 2years of use Build Number N2G470.
My answer was simple to this. Wanted a black and silver nexus 6p and when I removed the back to change it I noticed how flimsy the plastic was and was dented and cracked in places. So I took a razor blade when the phone was back together and removed the plastic all from around the edges and it now looks slot better. I did try and buy a mid frame before doing this as my LCD was perfect. But couldn't find one. Much better look now and the phone now looks brand new again and my ocd is at bay. Lol.
Plastic Filler
DANIELWHITT said:
My answer was simple to this. Wanted a black and silver nexus 6p and when I removed the back to change it I noticed how flimsy the plastic was and was dented and cracked in places. So I took a razor blade when the phone was back together and removed the plastic all from around the edges and it now looks slot better. I did try and buy a mid frame before doing this as my LCD was perfect. But couldn't find one. Much better look now and the phone now looks brand new again and my ocd is at bay. Lol.
Click to expand...
Click to collapse
Doesn't that plastic filler strip (between glass and aluminum chassis) act as a retaining ring to hold in the glass? I have not taken my phone apart, but that thin black plastic piece has broken in several places (with sections missing). I assumed it acts like a snap ring in the groove to retain the glass screen. Am I wrong? Is it just a for aesthetic purposes?
Does anyone know if Google recognizes this as a defect and fixes it for free? Or.... can I remove the remaining pieces and use the phone without it?
It doesn't hold the screen in. It's designed to act as a buffer between the glass and the frame to help stop the glass crack or smash if you drop it. It's actually part of the mid frame attached to the glass. Mine did what yours did, hence when I put the new housing on, I trimmed it down with a razor blade level with the rear housing and it made it look so much better, while still doing good the job of helping stop the glass from cracking when dropped. To be honest, once a case was on the phone you couldn't tell anyway, also Google doesn't see it as a defect, just part of wear and tear. I tried a defect claim and they said no as it was damage I had caused, even though mine happened from taking it in and out of my spigen case on a few occasions. Hope that helps.
---------- Post added at 08:25 PM ---------- Previous post was at 08:23 PM ----------
Also, you need to slide a slim pry tool between that plastic and the metal frame to remove the back. It's not in a ridge its part of the midframe of the phone.