Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Here some video to check the issue, please turn on the subtitles because im speaking Greek https://www.youtube.com/watch?v=oTkx0ifNhg4
Also here https://www.youtube.com/watch?v=F9dS76eRe0c
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Wait until the battery drained and phone shutdown, connect charger again and wait for 5 minutes , it will turn on in erecovery , shutdown and redo fastboot etc carefully.
Dr4In said:
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Click to expand...
Click to collapse
Dissconnect the usb cable and hold the power button. When it is just about to reboot, plug in the USB and hold the volume down button. This should take you to fastboot OR to error mode...
-------
Huawei devices aren't easy to brick, but recovering the devices is a pain... I hard bricked my device as well a couple weeks ago..
I have tried to wait for the battery drained completly and if you plug the usb while the phone is off the phone is powering on automatically and stays to the "Your Device has been unlocked"
Also with the same method before i plug in the usb i was trying to hold the volume down button and plug it in but it didnt happend it is booting on the same thing.
Dr4In said:
I have tried to wait for the battery drained completly and if you plug the usb while the phone is off the phone is powering on automatically and stays to the "Your Device has been unlocked"
Also with the same method before i plug in the usb i was trying to hold the volume down button and plug it in but it didnt happend it is booting on the same thing.
Click to expand...
Click to collapse
pls clear actual screen position of ur fone, unlock screen titled as fastboot and rescue or yellow text with black background.
chances are there u get fastboot connection by turning off mobile by power button hold for 7 seconds and phone turned off wait for a while ensure no USB cable connected to phone. then press volume down button and conect USB cable, you will see fast boot and rescue screen. now issue command fastboot devices. if u see ur devices serial number there then follow further fasboot procedure mentioned in other threads,
Fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system.img
above files may be obtained by extracting update.app for ur phone stock image by huawei extractor. you have to work for 2 days constantly for unbricking phone. I have gone through all these processes last week.
rizwansadiq said:
pls clear actual screen position of ur fone, unlock screen titled as fastboot and rescue or yellow text with black background.
chances are there u get fastboot connection by turning off mobile by power button hold for 7 seconds and phone turned off wait for a while ensure no USB cable connected to phone. then press volume down button and conect USB cable, you will see fast boot and rescue screen. now issue command fastboot devices. if u see ur devices serial number there then follow further fasboot procedure mentioned in other threads,
Fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system.img
above files may be obtained by extracting update.app for ur phone stock image by huawei extractor. you have to work for 2 days constantly for unbricking phone. I have gone through all these processes last week.
Click to expand...
Click to collapse
Hi, I have a similar problem: "your device has been unlocked and can't be trusted". I cannot enter fastboot nor with the two buttons method (power + volume down) or the three buttons method. I messed up with the EMUI, I guess. Infact, I unlocked the bootloader, relocked it and tried to unlock it again to flash a custom ROM. The first time I unlocked the bootloader, I tried to install TWRP but something went bad, I do not remember what, but I decided to relock.
Now I am stuck with this message. But....sometimes, I can't understand WHEN, I can enter my phone Last time it was when I tried the above solution (only volume down and usb cable, without the Power button). When the phone turned on, HiSuite recognized "a phone" was connected because the software turned on, but it couldn't really see it. I went into the Developer Options on the phone to turn on OEM, but it was grey and I could do nothing :crying:
Full of hope because the phone turned on, I then tried to flash the content of the SD Card (where I put files extracted with the Huawei Update Extractor) by holding the three buttons (power + volume up + volume down), but again it appeared the "your device has been unlocked" message.
Now the phone is off. Once, in the meantime, it appeared a red flash on the screen for one second, I am not sure it is related to the battery, it doesn't display a battery but only a flash.
I cannot enter fastboot in any way, I cannot flash from SD card, sure I cannot rollback because it implies flashing.
My only hope is some command to be given when I can enter the phone. Anyway, I sent it to repair (not official, I have obviously no guarantee anymore) and they sent it back to me: they didn't know what to do.
Any idea? Thanks a lot!
PS: I will read your replies as soon as I can but I have very variable ad unstable working hours!
Please don't blame Huawei for YOUR mistakes. Thank you
Johnny TDN said:
Please don't blame Huawei for YOUR mistakes. Thank you
Click to expand...
Click to collapse
Did I? Sorry if it seemed so, but of course are my mistakes...
help us
i have a same problem did you find solution
Same Problem Here
I have the same issue. Have anyone found a solution yet?
Dr4In said:
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Here some video to check the issue, please turn on the subtitles because im speaking Greek https://www.youtube.com/watch?v=oTkx0ifNhg4
Also here https://www.youtube.com/watch?v=F9dS76eRe0c
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Click to expand...
Click to collapse
I think the red light blinks cause you are critically low on power. Leave it plugged in. Ignore whats on the screen just leave it plugged in for a few hours and leave it alone.
Meticulus said:
I think the red light blinks cause you are critically low on power. Leave it plugged in. Ignore whats on the screen just leave it plugged in for a few hours and leave it alone.
Click to expand...
Click to collapse
Same here with a BLN-L21 (Honor 6x)
The phone will not charge with this method. Try to let it plug one night, and no charge !
@Meticulus this was the question felix ask you: is uboot (booting with sdcard) is possible ?
Fixed for me with buy an honor 9 ... but investigate to revive my honor 6x.
For now i have maybe found how to shutdown phone, to charge battery (with shurtcut two point in motherboard) but don't know if phone charge for the moment because there is no light
Solution for the moment but difficult AND / OR expensive ....
1. Remove emmc and repair it with a JTAG box.
2. Try to boot with uboot (but probably won't work)
---------- Post added at 03:32 PM ---------- Previous post was at 02:57 PM ----------
Dr4In said:
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Here some video to check the issue, please turn on the subtitles because im speaking Greek https://www.youtube.com/watch?v=oTkx0ifNhg4
Also here https://www.youtube.com/watch?v=F9dS76eRe0c
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Click to expand...
Click to collapse
Hello, can ask you some question about how you have hardbricked this phone ?
My honor 6x is same bricked, and red light too. So the big question is THE FIRSTIME BRICK = phone was FREEZE can't reboot and can't do nothing. I have wait for empty battery, and now dload and all is not working ?
I will try to charge my battery out of phone. For me it's like the phone never charge ... but i will try with a charged battery and plug unplug battery connector. It's like red screen low battery change boot mode ...
sanjay.rup said:
Same here with a BLN-L21 (Honor 6x)
The phone will not charge with this method. Try to let it plug one night, and no charge !
@Meticulus this was the question felix ask you: is uboot (booting with sdcard) is possible ?
Fixed for me with buy an honor 9 ... but investigate to revive my honor 6x.
For now i have maybe found how to shutdown phone, to charge battery (with shurtcut two point in motherboard) but don't know if phone charge for the moment because there is no light
Solution for the moment but difficult AND / OR expensive ....
1. Remove emmc and repair it with a JTAG box.
2. Try to boot with uboot (but probably won't work)
---------- Post added at 03:32 PM ---------- Previous post was at 02:57 PM ----------
Hello, can ask you some question about how you have hardbricked this phone ?
My honor 6x is same bricked, and red light too. So the big question is THE FIRSTIME BRICK = phone was FREEZE can't reboot and can't do nothing. I have wait for empty battery, and now dload and all is not working ?
I will try to charge my battery out of phone. For me it's like the phone never charge ... but i will try with a charged battery and plug unplug battery connector. It's like red screen low battery change boot mode ...
Click to expand...
Click to collapse
Its not actually mine and it was long time ago, but the owner told me that he unlocked bootloader with the official way, relocked, and then he unlocked again the third time the phone died.
Hello.
me too, he does not want to do anything anymore.
he only knows this '' your device is booting now '' screen with the red LED flashing.
whatever I do, it always starts on this screen. I think you have to change the motherboard.
Do you know where to find it at a reasonable price?
VNS-l31
Your device has been unlocked and can't be trusted
after i try to unlock my huawei P9 lite, my phone show this message "Your device has been unlocked and can't be trusted" and i can't restart or load from sd card.
i put update.app in new folder "dload", put the sd card in phone.... no boot. my laptop not detect usb phone. help me please.
ionut69 said:
after i try to unlock my huawei P9 lite, my phone show this message "Your device has been unlocked and can't be trusted" and i can't restart or load from sd card.
i put update.app in new folder "dload", put the sd card in phone.... no boot. my laptop not detect usb phone. help me please.
Click to expand...
Click to collapse
I fixed mine today. I just had to wait for 5 hours for the battery to drain. then when it shuts off i waited 10 min. after that i started the phone and i let me choose to continue to the phone.
I dunno if you have the exact same problem but thats how i fixed mine.
And after that i tried factory resetting (cause bluetooth and NFC didn't work) but then it got stuck again. so i waited it out and it worked once again.
Too scared to do anything to my phone now :/
alesbabnik said:
I fixed mine today. I just had to wait for 5 hours for the battery to drain. then when it shuts off i waited 10 min. after that i started the phone and i let me choose to continue to the phone.
I dunno if you have the exact same problem but thats how i fixed mine.
And after that i tried factory resetting (cause bluetooth and NFC didn't work) but then it got stuck again. so i waited it out and it worked once again.
Too scared to do anything to my phone now :/
Click to expand...
Click to collapse
now my battery is empty but when i plug in acc cable show same screen
any fix on this as I have the same issue with huawei p9 lite - no recovery mode, no usb reckognition from pc. Just stuck on that "unsafe" prompt screen after huawei logo
Stop buying huawei phones if you are into custom roms or root. They made the phone easily brickable and they removed the bootloader unlock site due to some stores installing malware into phones. But hey, they couldn't simply do what Xiaomi is doing eh?
Related
my problem is kind of abnormal. i couldnt find solution anywhere so i came here. my device was zenfone 5(t00f)/lollipop.
so i wanted to root my phone. i followed this guide >>
HTML:
http://forum.xda-developers.com/zenfone-5/general/zenfonetoolkit3-24-40-87-t3406557
the tool i used is called ZenfoneToolkit_20160719, downloaded from here
HTML:
https://drive.google.com/drive/folders/0B0AFmAAcGS5xbWpTQzBQVTN3b1k
. its a bundle of .exe, .dll, .img, .bin files. but no need to work on them seperately, there is a simple cli tool from which you can choose what you want to do and it executes that file for you. below is the list what you can do.
1. Wipe Cache
2. Factory Reset
3. Flash Boot
4. Flash Recovery
5. Flash Fastboot
6. Flash Stock ROM
7. Root
8. Unroot
9. Unlock Bootloader
10. Relock Bootloader
11. Zenfone Rescue aka Debrick
12. Fixing Generic IMEI 004999010640000
13. Backup MicroSD
14. Flash Boretz Kernel Lollipop
so wiped cache[1] first then i tried to root[7]. sadly it didnt work, when i turned the phone on it took me to fastboot screen, there i had only a few options like, normal boot(doesnt happen), recovery mode, restart. when i turned it off and pressed power and volume up together it would go to recovery where none of the options works. i though that was what called brick, so followed this guide to make my life better
HTML:
http://zenfone-blog.blogspot.com/2015/06/guide-how-to-unbrick-asus-zenfone-4-5-6.html
.
my phone by default came with kitkat. so when i downloaded the firmware i wanted to get a kitkat. but i couldnt find a matching recovery img and firmware for kitkat on asus official page. so i downloaded jellybean. ASUS ZenFone 5(T00F/T00J) software Image: V1.18.40.9 ww for firmware from here
HTML:
https://www.asus.com/support/Download/39/1/0/2/96nqlxHp1VKV4Rdz/32/
. and recovery img is 1.18.40.9_ww_recovery.img from here
HTML:
https://www.asuswebstorage.com/navigate/s/644D9E0A19714899974C75FC4B6C87EDY
. i dont know what "ww" means in those name but i saw it in my software version before so i went with it.
All the steps went smoothly, by the end of it i guessed my phone charge would be low so i put it in charge and turned it on. first time it turn on without a problem. i checked out a few things and leave it for charge. after a while i came back and battery was 0%. i thought i would be wise to plug out and in charging port again. as soon as i pull out the pin, screen instantly turned black and the phone went dead after a looooong ass vibration.
now when i try to charge the orenge light at top lights up but the animation that shows battery always show its empty. if i try to turn it on while plugged, it shows asus logo/intel logo and goes dead again. if i try to turn it on without being plugged, it shows a battery logo with a question mark, which i think means the phone cannot find battery.
i am stuck here.... plz someone be my savior.
Hello my dear, to get out of this problem I did the following: I connected the phone to compuador by USB cable (with himself off), then he calls and gets the question symbol, it held the power button plus volume up he must restart to get the logo asus about 4 seconds after loose the power button and continue with the volume button up insured. It should enter into fastboot mode there do the necessary procedures to reflash the system.
I hope you helped, hug!
matheusgcdj said:
Hello my dear, to get out of this problem I did the following: I connected the phone to compuador by USB cable (with himself off), then he calls and gets the question symbol, it held the power button plus volume up he must restart to get the logo asus about 4 seconds after loose the power button and continue with the volume button up insured. It should enter into fastboot mode there do the necessary procedures to reflash the system.
I hope you helped, hug!
Click to expand...
Click to collapse
i tried. but just cannot get to the fastboot screen. :'(
nooblett said:
i tried. but just cannot get to the fastboot screen. :'(
Click to expand...
Click to collapse
use this thread and perhaps there is hope
matheusgcdj said:
use this thread and perhaps there is hope
Click to expand...
Click to collapse
thnx. i am gonna try it now.
@matheusgcdj: yes it worked
Hi!
Last friday my Moto G4 XT1621 get the last nougat update. I started the update without any problem, but when it finished, my phone didn't boot again.
Now the phone only boots on fastboot, I can't enable the developer options and I don't know how to recover my new phone.
Please, help me! I don't know about Android and this things!
Some pics of my phone.
https://goo.gl/photos/PaDjEQrn4VtFH6oP9
Thanks
Here try this mate had the same problem after i tried to side load the nougat rom, my phone would start but get stuck on the boot logo (white screen blue m logo). You will need a pc as this rom cant be sideloaded. If you have any problems post in that forum and ill help u best i can.
https://forum.xda-developers.com/moto-g4-plus/how-to/install-official-firmware-soak-test-t3531296
---------- Post added at 10:45 PM ---------- Previous post was at 10:39 PM ----------
ROM: https://drive.google.com/file/d/0B2XJ90Yz2bQmYUoySkNYTURiUG8/view?usp=drivesdk
These are the steps.
1. Install moto g4 drivers
2. Download minimal adb fastboot and install it
3. Download the rom provided, and unpackage the .rar file to the minimaladb installation location usually found in programfilesx86/minimaladb
4.boot the phone into fastboot by holding power and volume down at the same time and connect to the pc
5.double click the flashall file and a command prompt will open and continue to flash the phone takes between 5/10 mins Do Not remove the phone during this process.
6.after installation remove the phone from the pc and boot the phone it will take awhile to boot the first time so bear with it you should see that you have a new boot animation (The hello moto).
Mykstabrum0121 said:
Here try this mate had the same problem after i tried to side load the nougat rom, my phone would start but get stuck on the boot logo (white screen blue m logo). You will need a pc as this rom cant be sideloaded. If you have any problems post in that forum and ill help u best i can.
https://forum.xda-developers.com/moto-g4-plus/how-to/install-official-firmware-soak-test-t3531296
---------- Post added at 10:45 PM ---------- Previous post was at 10:39 PM ----------
ROM: https://drive.google.com/file/d/0B2XJ90Yz2bQmYUoySkNYTURiUG8/view?usp=drivesdk
These are the steps.
1. Install moto g4 drivers
2. Download minimal adb fastboot and install it
3. Download the rom provided, and unpackage the .rar file to the minimaladb installation location usually found in programfilesx86/minimaladb
4.boot the phone into fastboot by holding power and volume down at the same time and connect to the pc
5.double click the flashall file and a command prompt will open and continue to flash the phone takes between 5/10 mins Do Not remove the phone during this process.
6.after installation remove the phone from the pc and boot the phone it will take awhile to boot the first time so bear with it you should see that you have a new boot animation (The hello moto).
Click to expand...
Click to collapse
Thank you!! I'll try this and will told you if it have worked!
Ok mate yeah let me know
Mykstabrum0121 said:
Ok mate yeah let me know
Click to expand...
Click to collapse
I'm having bad luck. My G4 bike apparently ran out of battery because it does not turn on and the white led flashes 4 times and goes off. I connected the original charger but it still does not turn on. If I connect it to the computer, it recognizes it as fastboot mode but nothing appears on the phone display.
I think the battery has completley drain to 0% Try to just leave the phone plugged into the charger for at least 10/15 mins then try holding power for 30 seconds. If it turns on, and you boot it into fastboot when you connect the phone to the pc start the command prompt and type adb devices if it shows a device connected then try to flash the rom. If it doesnt flash then Im not sure what the problem is its either a hardware error or the battery charger have you tried a different charger plug/wire. Could also try to Press and hold the Volume Up and Power button for 10-20 seconds whilst the phone is plugged into the charger?
No, the battery is okay. Last night I left the phone off to continue today and this morning appeared so. I supposed it was that the battery had run out, but I just checked it with a tester and it's charged. Since last night until today not install or probe anything, I had hopes of doing the tests that you told me today, but the phone is worse than before. When I connect the phone to the pc, the "safely remove hardware" system tray appears as "Eject fastboot S".
So did you try typing adb devices in command prompt when you plugged it into the pc
Mykstabrum0121 said:
So did you try typing adb devices in command prompt when you plugged it into the pc
Click to expand...
Click to collapse
No, I didn't. My G4 is totally dead and when I plug it to the charger, a white led starts blinking. I let the phone charging about a day, but nothing changes.
If I connect the phone to my PC, nothing happen, It don't recognice the phone.
Really I never again buy back a motorola again.
How long you had the phone it may still be under warranty?
Mykstabrum0121 said:
How long you had the phone it may still be under warranty?
Click to expand...
Click to collapse
The phone was bought in October in the USA, but now it is in Argentina. I have no warranty here, I would have to try to take it to the technical service.
If you have proof of purchase (receipt) it may be covered under manufacturers waranty as its usually 12months from the date of purchase, i would contact motorola to see if they can do anything for you. Best of luck.
same issue
Did you find the solution for that
So, I downloaded the A2017G B08 from this thread onto my SD card and went into the settings to update. All was fine until the phone got to the update screen and to 25% on the progress bar. Then the screen turned off, along with the phone. If I try to boot it, it's the same story. I see the ZTE screen, get to the update progress bar but it gets stuck on 25% and turns off. Kind of like a manual boot loop.
The phone isn't rooted or anything, I was downgrading to marshmallow to try and fix mic issues I was having earlier but never expected this.
Please help.
Thanks.
*deleted*
vesheljinn said:
So, I downloaded the A2017G B08 from this thread onto my SD card and went into the settings to update. All was fine until the phone got to the update screen and to 25% on the progress bar. Then the screen turned off, along with the phone. If I try to boot it, it's the same story. I see the ZTE screen, get to the update progress bar but it gets stuck on 25% and turns off. Kind of like a manual boot loop.
The phone isn't rooted or anything, I was downgrading to marshmallow to try and fix mic issues I was having earlier but never expected this.
Please help.
Thanks.
Click to expand...
Click to collapse
Ouch. We can try stuff but I never read anything like this here.
First try to access the recovery directly. I think it's Volume up and power, but if you get into FTM mode just try with volume down. If you can, then download B10 from the download center (it's weird that we have everything there and nobody uses it, it's frickin stickied on the Guides section for God's sake) or Nougat B04 and try to install it from an SD card.
If it doesn't work you have two ways to go: if the bootloader is unlocked, install TWRP via Controllerboy's guide (using axon7tool, it works every time)
OR
put your phone on EDL mode (Connect the USB cable to the PC, then hold both Volume buttons (NOT POWER) and insert the cable on the phone, and use MiFlash to get a working B10 on your phone. (there's a B10 package on 4pda)
If you choose the TWRP way you can install MiFavor 5.0 and be done with it. Or maybe a custom ROM, but if you didn't have any problem staying stock as it seems that you did, then you'll probably not like custom ROMs and their bugs
This is what I thougth as well. But his link only refers to B08 in MM. So he didn't want to install B08 on Nougat. As his bootloader is still locked he cannot install this ROM in no way.
Choose an username... said:
Ouch. We can try stuff but I never read anything like this here.
First try to access the recovery directly. I think it's Volume up and power, but if you get into FTM mode just try with volume down. If you can, then download B10 from the download center (it's weird that we have everything there and nobody uses it, it's frickin stickied on the Guides section for God's sake) or Nougat B04 and try to install it from an SD card.
If it doesn't work you have two ways to go: if the bootloader is unlocked, install TWRP via Controllerboy's guide (using axon7tool, it works every time)
OR
put your phone on EDL mode (Connect the USB cable to the PC, then hold both Volume buttons (NOT POWER) and insert the cable on the phone, and use MiFlash to get a working B10 on your phone. (there's a B10 package on 4pda)
If you choose the TWRP way you can install MiFavor 5.0 and be done with it. Or maybe a custom ROM, but if you didn't have any problem staying stock as it seems that you did, then you'll probably not like custom ROMs and their bugs
Click to expand...
Click to collapse
Hey, thanks for the response.
I downloaded MiFlash and got a working B10 but when I went to reboot the phone the screen wouldn't turn on, just the red LED was on. If I tried to go into recovery mode the phone vibrates and the LED flashes but it goes back to the same state. Also if I connect it to the PC and try and enter EDL mode there are sounds from windows that a USB device is being connected but that's it. MiFlash can't recognise the phone.
vesheljinn said:
Hey, thanks for the response.
I downloaded MiFlash and got a working B10 but when I went to reboot the phone the screen wouldn't turn on, just the red LED was on. If I tried to go into recovery mode the phone vibrates and the LED flashes but it goes back to the same state. Also if I connect it to the PC and try and enter EDL mode there are sounds from windows that a USB device is being connected but that's it. MiFlash can't recognise the phone.
Click to expand...
Click to collapse
I just had this issue, I plugged the phone into the orginal charger and for a legit 60sec held volume up and power button it will eventually power on .
jjallday said:
I just had this issue, I plugged the phone into the orginal charger and for a legit 60sec held volume up and power button it will eventually power on .
Click to expand...
Click to collapse
Did that for ~2 minutes, still nothing. Forgot to mention, when I connect it to the PC I get Handset Diagnostic Interface as a connected device.
vesheljinn said:
Did that for ~2 minutes, still nothing. Forgot to mention, when I connect it to the PC I get Handset Diagnostic Interface as a connected device.
Click to expand...
Click to collapse
hmm well idk i had this problem earlier today, even when i had mine connected to the pc the pc would make a noise as if the phone was turning on, but when i connected to the actual charger is when the 60sec thing actually worked , also i noticed that when i finally got it on the battery was down to 1% maybe some sort of battery issue. maybe let it set on the actual wall charger for awhile and try again.
vesheljinn said:
Did that for ~2 minutes, still nothing. Forgot to mention, when I connect it to the PC I get Handset Diagnostic Interface as a connected device.
Click to expand...
Click to collapse
Do the 4th category brick repair guide. Yes,you have to tear apart the phone, but I did this and didn't break it idk
No USB jigs or weird cables will work, you need to use the test pad to get into EDL.
There is another way though: it seems that if you discharge the phone completely, then hold vol down and power, and try a bunch of times, you might be able to get into FTM mode. You'll have adb from there, so you can do 'adb reboot edl' and use MiFlash to fix the software. But I haven't tried
Hi!
So i treid to install the twpr recovery via srk tool huawei
after i unlocked the bootloader and reboot the phone i got the ÿour device is booting now screen and i cant do anything
i tried to restart the phone then press the vol down + the usb cable and doesnt work i still get the same screen
can't acces erecovery, can't enter fastboot, i can't do anything
what do i do now?
Nickoll_no1 said:
Hi!
So i treid to install the twpr recovery via srk tool huawei
after i unlocked the bootloader and reboot the phone i got the ÿour device is booting now screen and i cant do anything
i tried to restart the phone then press the vol down + the usb cable and doesnt work i still get the same screen
can't acces erecovery, can't enter fastboot, i can't do anything
what do i do now?
Click to expand...
Click to collapse
Device stuck in device is booting now ? or the 3 option screen ?
Kcetin20 said:
Device stuck in device is booting now ? or the 3 option screen ?
Click to expand...
Click to collapse
The device is stuck in the "device is booting now':crying:
Same Problem...
Nickoll_no1 said:
The device is stuck in the "device is booting now':crying:
Click to expand...
Click to collapse
BLN-L24N - Honor 6x
Sooo, I have the same problem , here's my story. Please help I've resorted to using a SGH-T599N... Its embarrassing... I'd almost rather have an iPhone...
So Little ol' me was messing around/ deleted google play services/ reboot to twrp to recover but device ended up bricked. At the time, still able to access fastboot. I flashed recovery and firmware. I then tried dload roll back method and when it cleared the phone bootloader locked. So I unlocked bootloader again but when device re-booted the following screen came up and still remains:
" ' Your device has been unlocked and cant be trusted. ' -- ' Your device is booting now... ' " (No options are available.)
I eventually tried to restart to fastboot or erecovery BUT Everytime I try to power down the device, it tries to power up again but needs to charge for a minute before trying to boot itself back up. .(even after being on the charger for hours this happens). The problem with that is I can't get into fastboot or force dload because it automatically starts itself/ has to be plugged in until it turns back on. (Yes i've tried button mashing/ button holding/ etc. did not help)
How do I get the phone to charge, without it booting up? I have a feeling that if I can get it to start (without it first having to charge) I can get it to fastboot/ or erecovery. I have already tried to let the battery COMPLETELY drain.
Outside of that, I know the whole roll back and dload stuff. Currently it flashes the honor logo screen and then sits at "Your device is booting now..."
Bootloader is unlocked
OH! I should clarify, it boots on its own. I've tried disconnecting the battery, having it on the charger without the
battery. With the battery, Starting phone up by re-connecting the battery. No positive results
I'm about to start messing around with firmware flashing utilities, I just don't know of any. I wish there was a way to flash without being in fastboot mode. (I know very little of perl/python/linux, but I am a quick learner if you point me in the right direction.
Thank you in advance
MSDB714 said:
BLN-L24N - Honor 6x
Sooo, I have the same problem , here's my story. Please help I've resorted to using a SGH-T599N... Its embarrassing... I'd almost rather have an iPhone...
So Little ol' me was messing around/ deleted google play services/ reboot to twrp to recover but device ended up bricked. At the time, still able to access fastboot. I flashed recovery and firmware. I then tried dload roll back method and when it cleared the phone bootloader locked. So I unlocked bootloader again but when device re-booted the following screen came up and still remains:
" ' Your device has been unlocked and cant be trusted. ' -- ' Your device is booting now... ' " (No options are available.)
I eventually tried to restart to fastboot or erecovery BUT Everytime I try to power down the device, it tries to power up again but needs to charge for a minute before trying to boot itself back up. .(even after being on the charger for hours this happens). The problem with that is I can't get into fastboot or force dload because it automatically starts itself/ has to be plugged in until it turns back on. (Yes i've tried button mashing/ button holding/ etc. did not help)
How do I get the phone to charge, without it booting up? I have a feeling that if I can get it to start (without it first having to charge) I can get it to fastboot/ or erecovery. I have already tried to let the battery COMPLETELY drain.
Outside of that, I know the whole roll back and dload stuff. Currently it flashes the honor logo screen and then sits at "Your device is booting now..."
Bootloader is unlocked
OH! I should clarify, it boots on its own. I've tried disconnecting the battery, having it on the charger without the
battery. With the battery, Starting phone up by re-connecting the battery. No positive results
I'm about to start messing around with firmware flashing utilities, I just don't know of any. I wish there was a way to flash without being in fastboot mode. (I know very little of perl/python/linux, but I am a quick learner if you point me in the right direction.
Thank you in advance
Click to expand...
Click to collapse
So on ny phobe the mainboard is dead so i guess the internal storage is corrupted
I need to change that and i guess you need too...
It's not so expensive(like 40$ for my phone)
Nickoll_no1 said:
So on ny phobe the mainboard is dead so i guess the internal storage is corrupted
I need to change that and i guess you need too...
It's not so expensive(like 40$ for my phone)
Click to expand...
Click to collapse
do you have a part number?
MSDB714 said:
do you have a part number?
Click to expand...
Click to collapse
I dont think i was to a local service...it' s not so expensive but it's not cheap either
Hello guys,
A day ago I decided to root my Huawei P10 lite. I unlocked bootloader and flashed TWRP. Everything worked fine. However I was unable to root my phone so I tried to lock bootloader. Thats where my problem started.... I locked bootloader via ADB and then it said the phone will reboot and factory reset. Phone was rebooted but now its ,,stucked" on huawei logo screen and nothing happens.... I just let phone to discharge and when I try to turn it on its still get to the logo screen and nothing. Always when I try to turn phone off it keeps turning on to the logo screen and Im unable to go to recovery or safe mode because button combination dont work. I cant even connect it to the PC via the USB cable....
Any ideas how to fix it (if its even possible) would be much apreciated.
Thanks a lot guys.
So, even you if you mounted the /system partition read-write it gets modified and the signature breaks that's why your phone no longer boots.
Try following: shutdown the phone if you can, press volume down and at the same time plug in the USB cable and unlock the bootloader, then flash the latest firmware for the device using the HwOTA method:
https://forum.xda-developers.com/p10-lite/development/hwota-huawei-p10-lite-t3776186
https://forum.xda-developers.com/p1...pilation-firmware-flasheables-huawei-t3736754
Eurofighter_ty said:
So, even you if you mounted the /system partition read-write it gets modified and the signature breaks that's why your phone no longer boots.
Try following: shutdown the phone if you can, press volume down and at the same time plug in the USB cable and unlock the bootloader, then flash the latest firmware for the device using the HwOTA method:
https://forum.xda-developers.com/p10-lite/development/hwota-huawei-p10-lite-t3776186
https://forum.xda-developers.com/p1...pilation-firmware-flasheables-huawei-t3736754
Click to expand...
Click to collapse
Thats the problem, the phone cant be shut downed by the ,,official" way (hold power button) because it instatly power on after two seconds... Only way how to completely shut down is let the phone discharge.... Anyway when I try to shut down the phone and then instatly press volume down I always get to the logo screen then I get black screen (looks like its trying to do something) and then the phone reboots and again get logo screen... It looks like the phone is gone for good lol
Eurofighter_ty said:
So, even you if you mounted the /system partition read-write it gets modified and the signature breaks that's why your phone no longer boots.
Try following: shutdown the phone if you can, press volume down and at the same time plug in the USB cable and unlock the bootloader, then flash the latest firmware for the device using the HwOTA method:
https://forum.xda-developers.com/p10-lite/development/hwota-huawei-p10-lite-t3776186
https://forum.xda-developers.com/p1...pilation-firmware-flasheables-huawei-t3736754
Click to expand...
Click to collapse
Thats the problem, the phone cant be shut downed by the ,,official" way (hold power button) because it instatly power on after two seconds... Only way how to completely shut down is let the phone discharge.... Anyway when I try to shut down the phone and then instatly press volume down I always get to the logo screen then I get black screen (looks like its trying to do something) and then the phone reboots and again get logo screen... It looks like the phone is gone for good lol
EDIT
It worked as you said (holding volume down + USB) and phone booted successfully but then appeared shutting down possibly due to low battery... I will keep trying. So thank you very much, you saved my day lol.
Allright, the phone is gone for good... Whenever I try your trick (volume down + USB) the phone boot up to the OS but then always shut down because of low battery. I tried to charge the battery but it seems like its not charging at all... Got phone on charger for three hours now and still red LED diod shows low battery.... I think this thread can be closed and I will bring the phone to the service center and see if they can fix this or not. Again thanks for the help.
Try to charge it when is in bootloop or that's what you tried?
Eurofighter_ty said:
Try to charge it when is in bootloop or that's what you tried?
Click to expand...
Click to collapse
Yeah, now I have it on charger for 5 hours, got huawei logo on screen and red LED diod flashing... Strange thing is the phone is not heating anymore, even charger is cold... When I un-plug the charger the phone shut down in like 5 minutes... When its on charger its not turnning off so I assuming there must be some power coming through the charger to phone then...
This Huawei P10 Lite is quite strange piece of electronic.... Its just booted itself on its own and actually its working just fine... What would you recommend to do, now? battery is charging right now at 16%
pathfindercz said:
This Huawei P10 Lite is quite strange piece of electronic.... Its just booted itself on its own and actually its working just fine... What would you recommend to do, now? battery is charging right now at 16%
Click to expand...
Click to collapse
What do you mean by working just fine ? It booted to the OS or what ?
Eurofighter_ty said:
What do you mean by working just fine ? It booted to the OS or what ?
Click to expand...
Click to collapse
I left it plugged on charger and after few hours it booted to the OS, but when I tried to go to Fastboot and Rescue mode it turned off and now It wont boot again. Got stucked on huawei logo screen again.