Hello
There is no international firmware for the Z17.
The vendors are putting custom ROMS with multilanguage with or without google services but they have a great inconvenience, you will not be able to receive updates by OTA.
Where to download the official Chinese firmware for the Nubia Z17?
How can it be installed? From SD, OTG ... through your recovery mode?
XoanCarlos said:
Hello
There is no international firmware for the Z17.
The vendors are putting custom ROMS with multilanguage with or without google services but they have a great inconvenience, you will not be able to receive updates by OTA.
Where to download the official Chinese firmware for the Nubia Z17?
How can it be installed? From SD, OTG ... through your recovery mode?
Click to expand...
Click to collapse
The official Chinese firmware can be downloaded here : http://ui.nubia.cn/rom/detail/42
For the installation, there is an upgrade guide in PDF format but you need a Nubia account to access it (and my Chinese knowledge is much worse than my English one)...
How can you tell that you've got a custom rom on it from the vendor?
petitbreton said:
The official Chinese firmware can be downloaded here : http://ui.nubia.cn/rom/detail/42
For the installation, there is an upgrade guide in PDF format but you need a Nubia account to access it (and my Chinese knowledge is much worse than my English one)...
Click to expand...
Click to collapse
Taken a look at the PDF file; basic steps 1) Backup information on phone 2)copy firmware zip file into the root directory of internal storage 3)update firmware 4)if there are problems, factory reset after update
Only step (3) looks a little different from other phones; basically you should go Settings - Privacy & Security - Select "Slide to unlock" to reset screen unlock to simple slide to unlock and then Settings - Firmware Update - Local Update - Select the zip file for the firmware you want to update to
Hope this helps.
quagmire1234 said:
Taken a look at the PDF file; basic steps 1) Backup information on phone 2)copy firmware zip file into the root directory of internal storage 3)update firmware 4)if there are problems, factory reset after update
Only step (3) looks a little different from other phones; basically you should go Settings - Privacy & Security - Select "Slide to unlock" to reset screen unlock to simple slide to unlock and then Settings - Firmware Update - Local Update - Select the zip file for the firmware you want to update to
Hope this helps.
Click to expand...
Click to collapse
Developer options should be enabled too...I remembered I read.
Enviado desde mi NX505J mediante Tapatalk
Basically we should put the official firmware on for ota updates and the possibility that they may allow Google apps?
In my Rom there is nothing related to Firmware and/or Update.
NX563J_ENCommon_V2. 39
Cheers
Thomas
tsiebold said:
In my Rom there is nothing related to Firmware and/or Update.
NX563J_ENCommon_V2. 39
Cheers
Thomas
Click to expand...
Click to collapse
In your firmware there are Google services? If yes, make backup pls your firmware
Ok, but how do I do it?
Booting into recovery also does not Show anything related to upgrade. Only one is called boot into edload.
And it says System is root - 1 and Boot is root - 1.
Cheers
Thomas
tsiebold said:
Ok, but how do I do it?
Booting into recovery also does not Show anything related to upgrade. Only one is called boot into edload.
And it says System is root - 1 and Boot is root - 1.
Cheers
Thomas
Click to expand...
Click to collapse
Well i checked. And i think it's impossible. Where did you buy phone? Or for which country
I bought it from cect-shop.com.
They told me that I have to wait for an international Rom from nubia, which would be APPLIED via a PC.
I do have Google Services on it. Some things are buggy.
Cheers
Thomas
tsiebold said:
I bought it from cect-shop.com.
They told me that I have to wait for an international Rom from nubia, which would be APPLIED via a PC.
I do have Google Services on it. Some things are buggy.
Cheers
Thomas
Click to expand...
Click to collapse
Hey Thomas, i ordered my Phone from the cect-shop, too and it will arrive on July 11th.
Which version is your Z17? 6/64 or 6/128 ?
It is the 6/64 Version. The 8/128 was not available.
It is good Phone but needs time to get used to coming from Stock Android.
Cheers
Thomas
tsiebold said:
I bought it from cect-shop.com.
They told me that I have to wait for an international Rom from nubia, which would be APPLIED via a PC.
I do have Google Services on it. Some things are buggy.
Cheers
Thomas
Click to expand...
Click to collapse
I'll write to them, they can tell me where they took it. Can you also write on your own?
petitbreton said:
The official Chinese firmware can be downloaded here : http://ui.nubia.cn/rom/detail/42
For the installation, there is an upgrade guide in PDF format but you need a Nubia account to access it (and my Chinese knowledge is much worse than my English one)...
Click to expand...
Click to collapse
It can only be downloaded if you have the extraction password, that it what Baidu is asking for.
You can find it also here (GeekBu...). It is the release 2.44. I didn't have a look "inside".
Related
Ne firmware from Huawei Ru
http://consumer.huawei.com/ru/suppo...x.htm?id=36521&pname=MT7-TL10&pcode=Jazz-TL10
Release date 26/01
Should be for international TL10
No chance log
Has someone tested?
Just did the update. It went well, no problem, I'm yet to find any difference from the previous ones.
Does the phone, with it's very large screen, still show LESS information than a smaller phone? C'mon, the software on this thing totally sucks. I have a giant screen with such ridiculous font spacing, meaning I get less information on my 6-inch screen than I can get on a 5-inch model such as a P6. What kind of sad joke is this?
Does the new software fix this problem? If not, I have a mint Mate 7 for sale, used only long enough to see Huawei has made no progress with their software.
abbas said:
Just did the update. It went well, no problem, I'm yet to find any difference from the previous ones.
Click to expand...
Click to collapse
Which version is your phone? MT7-TL10 golden 3/32 GB?
Sent from my HUAWEI MT7-TL10 using Tapatalk
mirchichamu said:
Which version is your phone? MT7-TL10 golden 3/32 GB?
Sent from my HUAWEI MT7-TL10 using Tapatalk
Click to expand...
Click to collapse
MTL10 Gold 3Gb, 32Gb
abbas said:
MTL10 Gold 3Gb, 32Gb
Click to expand...
Click to collapse
Thank you but this update is for Russia. I am also using the same version but when I click on updater, it gives me a message that no update available... May be they have released update for your region but not yet for us. Right now I am on B120 SP04.
Sent from my HUAWEI MT7-TL10 using Tapatalk
mirchichamu said:
Thank you but this update is for Russia. I am also using the same version but when I click on updater, it gives me a message that no update available... May be they have released update for your region but not yet for us. Right now I am on B120 SP04.
Click to expand...
Click to collapse
I'm from the Philippines and I downloaded the B121 firmware from the link above and flashed it on my phone, I extracted and put the dload folder in my external SD card and did a local update via the updater under menu options, nothing was erased after except for root, so I rooted my phone again via CWM.
By the way, I also have the MT7-TL10 32gb/3gb version and did not get any updates from the updater, i was also in B120 SP04 before I flashed the B121.
yukarlo said:
I'm from the Philippines and I downloaded the B121 firmware from the link above and flashed it on my phone, I extracted and put the dload folder in my external SD card and did a local update via the updater under menu options, nothing was erased after except for root, so I rooted my phone again via CWM.
By the way, I also have the MT7-TL10 32gb/3gb version and did not get any updates from the updater, i was also in B120 SP04 before I flashed the B121.
Click to expand...
Click to collapse
Thanks buddy for your information.
Sent from my HUAWEI MT7-TL10 using Tapatalk
abbas said:
Just did the update. It went well, no problem, I'm yet to find any difference from the previous ones.
Click to expand...
Click to collapse
I'm running Chinese version MT7-TL10 V100 R001 CHN C00 B122 SP06 and could not "downgrade" to this international version. I just get an "update failed". Any ideas how to go back a step so I can get the international version?
steven ash said:
I'm running Chinese version MT7-TL10 V100 R001 CHN C00 B122 SP06 and could not "downgrade" to this international version. I just get an "update failed". Any ideas how to go back a step so I can get the international version?
Click to expand...
Click to collapse
Why do you want to downgrade? I was having some thought on updating my firmware to that of the Chinese version.
You can flash the firmware manually through adb, you'll need to extract the firmware. There are other threads in here that discusses about that.
My Italian Mt7 TL10 failed b121 update
I tried locL update, from recovery and by Hisuite
All failed, didnt even start
yukarlo said:
Why do you want to downgrade? I was having some thought on updating my firmware to that of the Chinese version.
You can flash the firmware manually through adb, you'll need to extract the firmware. There are other threads in here that discusses about that.
Click to expand...
Click to collapse
I want to downgrade because the Chinese version has issues. I have owned many HW phones and running a Chinese load is always a PITA. I want a normal international load that does not perpetually harass me with Huawei store stuff, that does not provide its own broken Calendar and Mail app, and that lets me manage my SIM cards correctly since I need dual SIM support to work in a specific way.
Unfortunately, I read the instructions for installing an international load over top of a Chinese load. I don't want to root my device, have never rooted a device, don't know how, don't want to know how, etc. It seems I am stuck. Even if I changed my mind, the instructions are not newbie level, so I very much doubt I could follow instructions that are not step-by-step "press this", "type that", unless I devote a lot of research. I could buy a new phone for cheaper than the time I would invest in this.
Gimme instructions
steven ash said:
I want to downgrade because the Chinese version has issues. I have owned many HW phones and running a Chinese load is always a PITA. I want a normal international load that does not perpetually harass me with Huawei store stuff, that does not provide its own broken Calendar and Mail app, and that lets me manage my SIM cards correctly since I need dual SIM support to work in a specific way.
Unfortunately, I read the instructions for installing an international load over top of a Chinese load. I don't want to root my device, have never rooted a device, don't know how, don't want to know how, etc. It seems I am stuck. Even if I changed my mind, the instructions are not newbie level, so I very much doubt I could follow instructions that are not step-by-step "press this", "type that", unless I devote a lot of research. I could buy a new phone for cheaper than the time I would invest in this.
Click to expand...
Click to collapse
I bought a russian version of the phone and after many times of ROM's flashing I ended up with chinise B122. Now I also want to migrate to European version and do not know how. It's not a problem for me to get a root and I also can try to dig dipper to figure out how to make the downgrade. Can you be so kind and provide me with a link for instructions you read, please, so I can try it myself. Thank you.
how to know wihch reason your phone is i have the mt7 lt10 gold 32gb/3gb
Hi
I found the Marshmellow link for Honor 7
http://consumer.huawei.com/in/support/downloads/detail/index.htm?id=74584
I have currently PLK-UL00C675B160 on my phone from india , the link says its for
Honor 7 Firmware(PLK-UL00IN, Android 6.0, EMUI 4.0, C675B330CUSTC675D003, India, Flipkart)
Am a noob and i dont want to brick my phone ,Can i download it and install on on my Phone ?
Found Marshmellow Update Link for Honor 7
Hi,
I have purchased this phone but sadly its Model Number PLK-UL00 not PLK-L01. I have upgraded to the latest build EMUI4.0_PLK-UL00_6.3.1 which is Android Version 6.0.
My question is - can I upgrade to EU version of the firmware PLK-L01 B320 or less. All I want is to get rid of all the chinese apps and replace them with pure google + english ones. Please help
Can you make a banana milkshake with strawberries? You can't. Same with installing the European build Android on Indian, Chinese etc.
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
ashahriar said:
Hi,
I have purchased this phone but sadly its Model Number PLK-UL00 not PLK-L01. I have upgraded to the latest build EMUI4.0_PLK-UL00_6.3.1 which is Android Version 6.0.
My question is - can I upgrade to EU version of the firmware PLK-L01 B320 or less. All I want is to get rid of all the chinese apps and replace them with pure google + english ones. Please help
Click to expand...
Click to collapse
Unlock bootloader
Root
Install Titanium Backup
Install the desired apps
Freeze the unwanted apps
ahmedzj said:
Hi
I found the Marshmellow link for Honor 7
http://consumer.huawei.com/in/support/downloads/detail/index.htm?id=74584
I have currently PLK-UL00C675B160 on my phone from india , the link says its for
Honor 7 Firmware(PLK-UL00IN, Android 6.0, EMUI 4.0, C675B330CUSTC675D003, India, Flipkart)
Am a noob and i dont want to brick my phone ,Can i download it and install on on my Phone ?
Click to expand...
Click to collapse
First of all, thanks for posting the link and secondly you can very well update you mobile as I have already done that with your link
Hi - Indian firmware version starts with PLK-UL00IN. My mobile firmware version is PLK-UL00. Shouldn't I be able to upgrade to the India firmware.
My apologies to the admin in advance as I have posted similar question in a different thread. But this thread is more suitable to the topic. I am a novice when it comes to firmware.
I tried updating , it failed.. the software update guidelines.pdf which was part of the update states "software version control problems, you should firstly upgrade a transfer package provided by R&D." wher do i get that ?
rspn69 said:
First of all, thanks for posting the link and secondly you can very well update you mobile as I have already done that with your link
Click to expand...
Click to collapse
Dude were you on B160 prior to updating to B330?
ahmedzj said:
I tried updating , it failed.. the software update guidelines.pdf which was part of the update states "software version control problems, you should firstly upgrade a transfer package provided by R&D." wher do i get that ?
Click to expand...
Click to collapse
Hi I updated it with the link provided. Did the archive download properly? Since it's an internal document, I don't think the package is available in public domain. You can check for the rollback package which is given in one of the threads. It might work. Or use the honor multi tool.
Btw, this update is 2 steps forward and one step back. Some good features like visitor mode have been removed. Call recording has become problematic. Previously, I could record easily using boldbeast call recorder. Settings are much more difficult to find. On the positive side, battery backup has jumped tremendously. Plugged out at 9.40 am today. My phone is still at 75 percent at 6.30 pm with moderate use. There is no doze mode setting but I think they have incorporated some features as I can see that phone goes into sleep when screen is off much more frequently. Also, the awesome themes that lollipop had are no more there. Not even the live wallpapers. Mixed feelings about the update overall.
shiva.kakkar11 said:
Hi I updated it with the link provided. Did the archive download properly? Since it's an internal document, I don't think the package is available in public domain. You can check for the rollback package which is given in one of the threads. It might work. Or use the honor multi tool.
Btw, this update is 2 steps forward and one step back. Some good features like visitor mode have been removed. Call recording has become problematic. Previously, I could record easily using boldbeast call recorder. Settings are much more difficult to find. On the positive side, battery backup has jumped tremendously. Plugged out at 9.40 am today. My phone is still at 75 percent at 6.30 pm with moderate use. There is no doze mode setting but I think they have incorporated some features as I can see that phone goes into sleep when screen is off much more frequently. Also, the awesome themes that lollipop had are no more there. Not even the live wallpapers. Mixed feelings about the update overall.
Click to expand...
Click to collapse
Hi,
Could you please share the checksum of the UPDATE.APP file ? Not sure whether the download was corrupted
Also were you were on B160 before the update ?
I updated the using the Settings-> updater-> Local Update -->Select the update. Did you do the same ?
The Update failed and rebooted ,so i dint brick the phone for now
ahmedzj said:
Hi,
Could you please share the checksum of the UPDATE.APP file ? Not sure whether the download was corrupted
Also were you were on B160 before the update ?
I updated the using the Settings-> updater-> Local Update -->Select the update. Did you do the same ?
The Update failed and rebooted ,so i dint brick the phone for now
Click to expand...
Click to collapse
MD5 checksum is F697BB78C8E8202DC78716C8647E8706.
Yeah I was on 160 and did a local update as you suggested. Better download it again. But frankly, I am finding the update more regressive than progressive.
ahmedzj said:
Dude were you on B160 prior to updating to B330?
Click to expand...
Click to collapse
I have updated from B 160 to B 304
shiva.kakkar11 said:
MD5 checksum is F697BB78C8E8202DC78716C8647E8706.
Yeah I was on 160 and did a local update as you suggested. Better download it again. But frankly, I am finding the update more regressive than progressive.
Click to expand...
Click to collapse
Yup the download was corrupted, i redownloaded it and compared the checksum , Now its installed .. thank you
rspn69 said:
I think many of us may not be aware as how to perform local update in honor 7 which has marshmallow installed on it. I have gone through it and understand how it feels when you download an update and while trying to find local update option update app. Its frustrating and discouraging too. But I could find the way to do it on some other site. Its simple and easy. Just see below.
How to Update
Unpack the firmware package on your computer.
Transfer the extracted dload folder to your phone’s microSD card.
Take a backup of your important stuff using Huawei’s native app.
Safely unplug the USB cable and turn your phone off.
Reboot while holding Vol Up + Vol down + Power for a few seconds. Release Power upon vibration.
Once the upgrade starts let go of the volume keys and allow the installation to proceed.
And enjoy
Click to expand...
Click to collapse
ahmedzj said:
Hi
I found the Marshmellow link for Honor 7
http://consumer.huawei.com/in/support/downloads/detail/index.htm?id=74584
I have currently PLK-UL00C675B160 on my phone from india , the link says its for
Honor 7 Firmware(PLK-UL00IN, Android 6.0, EMUI 4.0, C675B330CUSTC675D003, India, Flipkart)
Am a noob and i dont want to brick my phone ,Can i download it and install on on my Phone ?
Click to expand...
Click to collapse
Hi Ahmed, you can very well download and install the same. I have done that and have not found any bug till now since yesterday.
Works! Thanks!!
ahmedzj said:
Hi
I found the Marshmellow link for Honor 7
http://consumer.huawei.com/in/support/downloads/detail/index.htm?id=74584
Click to expand...
Click to collapse
Thank you ahmedzj, for sharing the link. Much Appreciated.
It worked just fine. I upgraded from b304.
seethahere said:
Thank you ahmedzj, for sharing the link. Much Appreciated.
It worked just fine. I upgraded from b304.
Click to expand...
Click to collapse
Hi!
I was wondering if i could install the update from the download link that was shared... Im using a European device, could it work?
Shevvy said:
Hi!
I was wondering if i could install the update from the download link that was shared... Im using a European device, could it work?
Click to expand...
Click to collapse
I think the European version file is over here - http://forum.xda-developers.com/honor-7/general/official-marshmallow-6-0-file-beta-b320-t3318570
Hi, mine is Malaysia set, now at latest firmware B130. Is it safe for me to update to B330 ?
So I've searched for a answer but nothing worked.
I have the ALE-L21 model, and it bootloop-ed when I was trying to root the phone.
I've tried to put an update from the sd card by pressing volume up and down + power button and it just said failed from the start.
I've tried entering fastboot mode and flashing boot.img, recovery.img, but i it didn't worked.
Sorry for the bad english, please help me.
first off all...
Whe need al little more information.
dual/single sim?
What build number are you on?
Did you unlock your bootloader? (i think that's your problem)
do you have a goldfish?
If you can answer these questions we can help you
Hi! I have same issue with my P8 Lite single sim from Vodafone. Before i went into bootloop i had B181 branded software.
My bootloader is locked (how i can get unlock code when emui site is down?). Is there any way to rescue my phone without unlocking bootloader?
Maybe it will be possible to flash (vol+,vol-,power) it once again with vodafone rom, but i can't find it anywhere.
Thanks for support.
benjiamin said:
Hi! I have same issue with my P8 Lite single sim from Vodafone. Before i went into bootloop i had B181 branded software.
My bootloader is locked (how i can get unlock code when emui site is down?). Is there any way to rescue my phone without unlocking bootloader?
Maybe it will be possible to flash (vol+,vol-,power) it once again with vodafone rom, but i can't find it anywhere.
Thanks for support.
Click to expand...
Click to collapse
Is the site down again?as far as i can tell it's online https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
you can't flash anything with bootlaoder locked. don't try it.
just unlock your boatloader after that's done come back
the first step is online but at next step i have "We're sorry but the server is busy.." since yesterday
benjiamin said:
the first step is online but at next step i have "We're sorry but the server is busy.." since yesterday
Click to expand...
Click to collapse
try this one http://huaweip8lite.blogspot.be/2016/03/bootloader-huawei-p8-lite-14-huawei.html
i don't know if it's works but its from one of our best developers Sokkoban
hint use google translate.
websit site is online again, bootloader unlocked what are next steps ?
Edit: ok i've used P8-lite multitool and phone is back but i do not have imei number and in software version i have "balongc50b311" how to fix it now?
benjiamin said:
websit site is online again, bootloader unlocked what are next steps ?
Edit: ok i've used P8-lite multitool and phone is back but i do not have imei number and in software version i have "balongc50b311" how to fix it now?
Click to expand...
Click to collapse
Oh you got the balong bug that's beautiful...
before i can give you antyhing i must know what version did you updated to?
Lordbannakaffalatta said:
Oh you got the balong bug that's beautiful...
before i can give you antyhing i must know what version did you updated to?
Click to expand...
Click to collapse
I'm not 100% sure now but it should be ALE-L21C432B133_Europe Channel_single Software from official huawei site
In that build there should be a floder named vendor with an small update.app in it. put that one in your sdcard/internal memory and go trough settings-> updater-> menu-> local update and select that. let it do and everything should be fine
Lordbannakaffalatta said:
In that build there should be a floder named vendor with an small update.app in it. put that one in your sdcard/internal memory and go trough settings-> updater-> menu-> local update and select that. let it do and everything should be fine
Click to expand...
Click to collapse
Everything works, thank you so much but it seems that this ROM is bit laggy and when I'm tryning to delete some ****ty games it's restarting and games remain.
Can i update it now to Android 6.0? Will it be possible via OTA? Right now i have info that my current version is latest one.
benjiamin said:
Everything works, thank you so much but it seems that this ROM is bit laggy and when I'm tryning to delete some ****ty games it's restarting and games remain.
Can i update it now to Android 6.0? Will it be possible via OTA? Right now i have info that my current version is latest one.
Click to expand...
Click to collapse
you have to update manually if you want MM i will post a link with descriptions once i uploaded that. (seriouslt i typed this like a 1000 times)
here you go http://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994
Hello,
I've just bought a Le Pro 3 6GB/64GB from Banggood, and it arrived with EUI 5.9.020S (Build: WAXCNFN5902012312S).
It looks like there are not much Chinese bloatware, Google Play and a few Google apps were already installed on the phone. There were no startup tutorial when I first started it up, the language were already set to English...
I'm not sure if this ROM is original, it's supposed to be. Anyway, there is no "System Update" in the System settings... How can I get this item back so I can "easily" update the firmware?
The firmware is as I received it, no root, no TWRP, no nothing special.
Can't flash trough recovery?
marik1 said:
Can't flash trough recovery?
Click to expand...
Click to collapse
Yes you're right, it seems that in Recovery I can flash an update.zip.
Strange that I don't have a "System Update" in the System settings though... I have to download the update.zip manually.
Where can I find the latest firmware for the x720 6GB/64GB to flash that way?
https://bbs.le.com//zt/eui/index.html
Or if you cant download, try to find megatrend reuploads...
marik1 said:
https://bbs.le.com//zt/eui/index.html
Or if you cant download, try to find megatrend reuploads...
Click to expand...
Click to collapse
Ok, so the last version available is 5.9.023S then.
Download don't work, I'll try to find it elsewhere, thanks.
It's a shop ROM, updater won't update it so they removed it. Update.zip method works though. If you can't download from LeEco server, try removing port number from dowload url. You will probably lose Gapps when you update!
EDIT: For example my download url starts with 107.155.49.13:110/222/8/95/scmauto/0/etc.. Just remove :110 from url and it should work.
True. For me :110 is not working. Gapps can be installed as APK (from sites like APKMirror).
Presterin said:
It's a shop ROM, updater won't update it so they removed it. Update.zip method works though. If you can't download from LeEco server, try removing port number from dowload url. You will probably lose Gapps when you update!
EDIT: For example my download url starts with 107.155.49.13:110/222/8/95/scmauto/0/etc.. Just remove :110 from url and it should work.
Click to expand...
Click to collapse
Thank you, it worked.
Does that means that this ROM will have all the chinese bloatware?
The ROM the phone came with seems to have none installed, and play store was already on it.
So far everything works pretty fine on this phone, makes me wonder if the benefit of this newer official ROM is worth the hassle.
ZeblodS said:
Thank you, it worked.
Does that means that this ROM will have all the chinese bloatware?
The ROM the phone came with seems to have none installed, and play store was already on it.
So far everything works pretty fine on this phone, makes me wonder if the benefit of this newer official ROM is worth the hassle.
Click to expand...
Click to collapse
Yes, it will include all chinese apps. Mine came with shop ROM. I updated it to official, tried some stock based custom ROMs and I'm currently on latest OmniROM. In my opinion there's something sketchy in chinese shop ROMs, you can never tell what they have done.
I have a Zenfone 3 Z012DE and I do not know what firmware to install, since I have seen different models in the roms and otas uploaded to the forum, I do not know how to check the correct model to which my equipment corresponds
Is possible update to Nougat?, not link for my Firmware of my model ...
Edit: ZE552KL (Asus Z012DE)
Thanks
First off, as a new user I am unable to supply you the link directly to the page but I can direct you to where you would find your update:
If you search in Google "Zenfone 3 Z012DE" (Without quotation marks obviously) then the first link should be an Asus page. Once the page opens, you will see a bunch of gallery pictures of your device, near the top right under the search bar you should see Support, click it. Then, go to Driver & Tools, select Android as your OS and a few boxes should appear. On the second box, you will see the latest Nougat update for your device (WW-14.2020.1706.53). If you notice in your screenshot, your software code starts with WW, only download firmwares that start with WW off Asus support page since those are the only ones that will work with your devices. Unfortunately, if your phone works the same way as mine, your build indicates the date 09/09/2016 which means the latest update may not work because it will refuse to update on a build that is older than 01/20/2017 (I think that's the exact date) in which case you will have to download and upgrade each version at a time until you get to the lastest firmware.
To install the updates, copy them over to an SD card from a PC or download it through your phone and make sure you know where to find it on the SD card, boot into recovery and hit update from SD card.
Necrodaemon said:
I have a Zenfone 3 Z012DE and I do not know what firmware to install, since I have seen different models in the roms and otas uploaded to the forum, I do not know how to check the correct model to which my equipment corresponds
Is possible update to Nougat?, not link for my Firmware of my model ...
Edit: ZE552KL (Asus Z012DE)
Thanks
Click to expand...
Click to collapse
Flash WW_13.20.10.152 first.
After flashing, update your device to WW_14.2015.1701.8/ WW_14.2015.1701.13
After upgrading to Nougat, flash the new WW_14.2020.1706.53 firmware.
P.S: These update files can be found on ASUS' website.
Hope this helps
SaktisWRXSTi said:
Flash WW_13.20.10.152 first.
After flashing, update your device to WW_14.2015.1701.8/ WW_14.2015.1701.13
After upgrading to Nougat, flash the new WW_14.2020.1706.53 firmware.
P.S: These update files can be found on ASUS' website.
Hope this helps
Click to expand...
Click to collapse
Thanks, for me worked this way and flashed last ww nougat.
Receveid yesterday z012de, luckily ww version with android 6.0.1 version not upgradable online.
SaktisWRXSTi said:
Flash WW_13.20.10.152 first.
After flashing, update your device to WW_14.2015.1701.8/ WW_14.2015.1701.13
After upgrading to Nougat, flash the new WW_14.2020.1706.53 firmware.
P.S: These update files can be found on ASUS' website.
Hope this helps
Click to expand...
Click to collapse
Good afternoon, I can install firmware ww15 (Android 8) ASUS_Z012DE?
At the moment I have the firmware WW_13.20.10.152.
Do I have to install the firmware WW_14.2015.1701.8 and then the WW_14.2020.1706.53?
Or can I move from the WW_13.20.10.152 firmware directly to WW-15.0410.1712.31 or WW-15.0410.1801.40?
helder3678 said:
Good afternoon, I can install firmware ww15 (Android 8) ASUS_Z012DE?
At the moment I have the firmware WW_13.20.10.152.
Do I have to install the firmware WW_14.2015.1701.8 and then the WW_14.2020.1706.53?
Or can I move from the WW_13.20.10.152 firmware directly to WW-15.0410.1712.31 or WW-15.0410.1801.40?
Click to expand...
Click to collapse
I have similar question. I can install firmware ww15 (Android 8) ASUS_Z012DE?
At the moment I have the firmware WW_14.2020.1709.68. I tried upgrade to WW_14.2020.1711.75, to WW_14.2020.1711.79, to WW_14.2020.1711.85 but don't work. installation aborted. What should i do?