Hi, I hope you help me. I have an Asus zenfone 6, and it with infinite loop and with USB debugging disabled, so my PC does not recognize my cell phone.
WHAT DO I DO???
edcarlos44 said:
Hi, I hope you help me. I have an Asus zenfone 6, and it with infinite loop and with USB debugging disabled, so my PC does not recognize my cell phone.
WHAT DO I DO???
Click to expand...
Click to collapse
Didi you instal fastboot/adb drivers in your PC?
Yes, I installed it.
I also followed all the tutorials I found on the web and nothing.
edcarlos44 said:
Yes, I installed it.
I also followed all the tutorials I found on the web and nothing.
Click to expand...
Click to collapse
did you try "fastboot devices" in terminal when your phone was connected in fastboot mode?
Yes, my phone has entered the boot loop with usb debug mode disabled, my computer does not recognize the device.
what do I do???
Related
Hey guys!
I need yoyr help. My phone was dead since march 11. I don't remember what I'm done with it, but the following symptoms are:
- when I turn on the phone nothing exept Galaxy S GT-I9000 Samsung screen is showed.
- when I turn phone to download mode and connect it with my computer, nothing happens,no notifications, device manager nothing shows, I once showed: one of your devices has malfunction.
What should I do? USB plug is broken? My other phone have no problem with this MicroUSB cable from samsung and it's connecting to computer without any problems.
Edit:
I plug cable with turning on download mode. Now computer shows: one of your device has malfunction. DM error loop?
UP Please! Same problem!
Just can access download mode, but my PC doesn't recognise it.
It got stuck in the first logo and I can't access Recovery.
Mathsiel said:
UP Please! Same problem!
Just can access download mode, but my PC doesn't recognise it.
It got stuck in the first logo and I can't access Recovery.
Click to expand...
Click to collapse
You use odin right?
And correct drivers installed?
Sent from my GT-I9000 using Tapatalk 2
misiek1791 said:
Now computer shows: one of your device has malfunction. DM error loop?
Click to expand...
Click to collapse
use solution in
2) Problem:- Cannot connect to PC or Unknown Device, getting Code 43 or any other code or NO response when using USB cable in My Android Solutions
Mathsiel said:
Just can access download mode, but my PC doesn't recognise it.
It got stuck in the first logo and I can't access Recovery.
Click to expand...
Click to collapse
use solution in
1) Problem:- Cannot enter Download or Recovery Mode and
2) Problem:- Cannot connect to PC or Unknown Device, getting Code 43 or any other code or NO response when using USB cable in My Android Solutions
xsenman said:
use solution in
2) Problem:- Cannot connect to PC or Unknown Device, getting Code 43 or any other code or NO response when using USB cable in My Android Solutions
use solution in
1) Problem:- Cannot enter Download or Recovery Mode and
2) Problem:- Cannot connect to PC or Unknown Device, getting Code 43 or any other code or NO response when using USB cable in My Android Solutions
Click to expand...
Click to collapse
yep, I was checked this thing. And this is not helpful. Yes, have few good ideas but for my case... nothing I can use... Main reason: My computer don't show me any alerts or messages after plug in mUSB to phone...
I solved my problem. What I did was to use another PC, then just installed the Samsung drivers, plugged the phone in download mode and the the driver installed OK.
Odin recognised the phone too so I could flash a kernel.
I can't realize why my PC didn't recognize the phone. I tried reinstalling drivers, the android SDK but nothing worked.
Thanks for the answers.
misiek1791 said:
My computer don't show me any alerts or messages after plug in mUSB to phone...
Click to expand...
Click to collapse
And IF nothing worked and USB connection still fails no matter what, than it would be best to look into this
Hello.
I recently installed the 4.3 ota update. I knew I would have to reroot. After the update I have tried everything I can think of to flash a new recovery or bootloader or anything. All without success. Fastboot simply says "Sending...", the phone says "downloading..." and that's the end of it. They would both sit in that state forever if I let them.
I know I'm not alone on this issue. I have searched and searched without finding a solution. Does anyone know of one?
Thanks.
pfederighi said:
Hello.
I recently installed the 4.3 ota update. I knew I would have to reroot. After the update I have tried everything I can think of to flash a new recovery or bootloader or anything. All without success. Fastboot simply says "Sending...", the phone says "downloading..." and that's the end of it. They would both sit in that state forever if I let them.
I know I'm not alone on this issue. I have searched and searched without finding a solution. Does anyone know of one?
Thanks.
Click to expand...
Click to collapse
1. Usb debugging enabled and bootloader unlocked?
2. Correct drivers installed, try these usb naked drivers for instance https://www.google.nl/url?sa=t&rct=...=RUlfH35SAJki_DdLfo8MeA&bvm=bv.51773540,d.Yms.
3. Used the original usb cable or tried another usb port?
4. If you type fastboot devices in fastboot mode do you see a serialnumber? The same for adb devices in adb mode?
gee2012 said:
1. Usb debugging enabled and bootloader unlocked?
2. Correct drivers installed, try these usb naked drivers for instance https://www.google.nl/url?sa=t&rct=...=RUlfH35SAJki_DdLfo8MeA&bvm=bv.51773540,d.Yms.
3. Used the original usb cable or tried another usb port?
4. If you type fastboot devices in fastboot mode do you see a serialnumber? The same for adb devices in adb mode?
Click to expand...
Click to collapse
USB debugging is enabled.
I've tried the original USB cable and others. I've tried different USB ports.
adb works fine. Fastboot recognizes my phone and prints a serial number. Fastboot even works for locking/unlocking the boot loader.
There are no "drivers" in the Linux world. Should I find someone who has a Windows system and ask to use their computer?
Thanks.
pfederighi said:
USB debugging is enabled.
I've tried the original USB cable and others. I've tried different USB ports.
adb works fine. Fastboot recognizes my phone and prints a serial number. Fastboot even works for locking/unlocking the boot loader.
There are no "drivers" in the Linux world. Should I find someone who has a Windows system and ask to use their computer?
Thanks.
Click to expand...
Click to collapse
Yes, you may try that. I`am talking about a windows pc and never had an issue. I don`t have xperience with linux computers.Good luck bro
Solved
gee2012 said:
Yes, you may try that. I`am talking about a windows pc and never had an issue. I don`t have xperience with linux computers.Good luck bro
Click to expand...
Click to collapse
So. I solved the problem. I now feel like an idiot.
I plugged my phone into a Windows system and a nice notice popped up saying that my device could run faster if it was plugged into a USB 2.0 port. Then it dawned on me that only a few of the ports on my computer are 2.0 and that I had tried one of them previously but with an extension cable (because it's in the back and hard to reach). I unplugged the extension cable and plugged the USB cable directly into the port and all was well.
I hope that others who have had this issue find this useful.
Thank you for your help.
Hi all,
i have a problem with my Nexus 4 , my PC doesn't recognize my phone not in mass storage not in the device manger, but it will charge the phone also i cant get in my recovery it says NO COMMAND , i got Un rooted phone with unlocked bootloader and i have stock rom 4.4.0 krt16s.
any ides?
tnx for the help...
and i try to change cable, pc, other os, nothing helped.
Does your phone boot normally? Can you turn on USB debugging?
audit13 said:
Does your phone boot normally? Can you turn on USB debugging?
Click to expand...
Click to collapse
yes it boot normally and i can turn USB Debugging and it still doesn't recognize with and without USB debugging mode.
When you select recovery from fastboot, that's when you get the "no command" error?
audit13 said:
When you select recovery from fastboot, that's when you get the "no command" error?
Click to expand...
Click to collapse
yes
delete
Its drivers problem.
Delete all driver you have then install again
Oz4225 said:
Its drivers problem.
Delete all driver you have then install again
Click to expand...
Click to collapse
i got fresh windows without any drivers.
Install this driver:
https://www.copy.com/s/C9uWyr4n4WEE/UniversalAdbDriver.msi
Oz4225 said:
Install this driver:
https://www.copy.com/s/C9uWyr4n4WEE/UniversalAdbDriver.msi
Click to expand...
Click to collapse
no help
rep
theshield88 said:
Hi all,
i have a problem with my Nexus 4 , my PC doesn't recognize my phone not in mass storage not in the device manger, but it will charge the phone also i cant get in my recovery it says NO COMMAND , i got Un rooted phone with unlocked bootloader and i have stock rom 4.4.0 krt16s.
any ides?
tnx for the help...
Click to expand...
Click to collapse
I do same kind of prob with my PC. The root of problem is mostly the USB cable itself. I've got the stock nXs⁴ cable yet after a year its out I think. When that happens try some many cable.
The prob might even occur due to MTP. If debugging is enable then ADB would recognize nXs⁴ as offline and no Portable media device would be visible in My PC. In that case try restarting PC!
nXs⁴ aRvInD G R
I'm running into a problem that I've seen others have. I have a US996, USB debugging is on, OEM unlock is on, and the LG USB drivers are installed.
I can do "adb reboot bootloader" and the phone will reboot into Fastboot with no problems.
But once I'm there, commands don't work. In my Device Manager (Win 7), in fastboot mode, the device is showing up as "Other devices\Android", with no driver attached to it. Okay, so we know where the problem is.
But trying to update the driver in Auto mode doesn't work. Pointing it to the LG directory doesn't work. Pointing it to a directory with the Google USB drivers doesn't work.
How can I fix this?
Haphim said:
I'm running into a problem that I've seen others have. I have a US996, USB debugging is on, OEM unlock is on, and the LG USB drivers are installed.
I can do "adb reboot bootloader" and the phone will reboot into Fastboot with no problems.
But once I'm there, commands don't work. In my Device Manager (Win 7), in fastboot mode, the device is showing up as "Other devices\Android", with no driver attached to it. Okay, so we know where the problem is.
But trying to update the driver in Auto mode doesn't work. Pointing it to the LG directory doesn't work. Pointing it to a directory with the Google USB drivers doesn't work.
How can I fix this?
Click to expand...
Click to collapse
Had the same problem, once you're in fastboot go to device manager and go to your device. You should see
Still_living714 said:
Had the same problem, once you're in fastboot go to device manager and go to your device. You should see
Click to expand...
Click to collapse
Your reply had a cliffhanger...
Haphim said:
Your reply had a cliffhanger...
Click to expand...
Click to collapse
)
Lmao ?, sorry was at work. Here's the link ? it's for the G5 but for the drivers it's the same process. It's about the 430 mark
Hi, my phone is bootlooped, and it cannot be detected by my pc
I followed the tutorial here
https://forum.xda-developers.com/asus-zenfone-max-pro-m1/how-to/how-to-asus-flash-tool-aft-t3923941
but my phone doesn't show up in the program.
I've tried installing ASUS Android USB drivers for Windows, but didnt work
https://imgur.com/a/Q17iSVF
Any suggestion would be appreciated, i'm so frustrated here. thanks
Adzbrakan said:
Hi, my phone is bootlooped, and it cannot be detected by my pc
I followed the tutorial here
https://forum.xda-developers.com/asus-zenfone-max-pro-m1/how-to/how-to-asus-flash-tool-aft-t3923941
but my phone doesn't show up in the program.
I've tried installing ASUS Android USB drivers for Windows, but didnt work
https://imgur.com/a/Q17iSVF
Any suggestion would be appreciated, i'm so frustrated here. thanks
Click to expand...
Click to collapse
Make sure you already go to Fastboot mode. After connect your phone to your PC, you will hear connected sound from PC. Extract firmware zip and then run flashall_aft.bat until phone restart. Use drivers from ADB installer.
Sent from my ZenFone Max Pro M1 using Tapatalk