Guys I have found something strange.
Last night I had left my dash charger somewhere so I plugged in my OP5 in a regular charger for the night. The red charging led was on. The following morning, my phone was more or less on the same battery percentage. I installed Ampere from the playstore and the charger, that is supposed to output up to 2.4A or even more using QC3.0, was only charging my battery with 300mAh. I doubt it actually did this all night, considering my battery hadn't charged at all.
Since I've tried 4 other chargers, and it seems I can't get more than 400mAh out of them according to Ampere.
My 3T could be charged with any regular charger, although much slower than dash charging, but I could get 1-2A without problems.
Do you guys have the same? Or is my OP5 broken?
Could somebody please try?
Charging Ok here
With 830mA on an normal USB (1A) charger (Not great but OK)
Well i have a microsoft 3A usb c charger, works like a charm.. not dash but it charges!
Hm, thanks! So either a Quickcharge charger is a problem with th OP5, or my device is broken.
Let me find an old & simple charger to check this.
I've tested it with my QC 3.0 chargers all over the house and in my car and It works like it should.
TheFrozen4 said:
Since I've tried 4 other chargers, and it seems I can't get more than 400mAh out of them according to Ampere.
Click to expand...
Click to collapse
have you tried other cables too ? cause they are the problem most of the time.
I charged with Samsung Galaxy S7's fast charger and another USB-C cable and it's working fine and without overheating phone or charger
kabauterman said:
I've tested it with my QC 3.0 chargers all over the house and in my car and It works like it should.
Click to expand...
Click to collapse
Same for me, with this cable: https://www.aliexpress.com/item/TIE...on-Fast-Charging-Type-C-Data/32727882959.html ... and Zero problems
Hastaloego said:
have you tried other cables too ? cause they are the problem most of the time.
Click to expand...
Click to collapse
I'm so happy you posted this.
Indeed, the issue is not the charger or my phone, but the cabling!
I have many cheaper and ultra-cheap USB cables, and some work and others don't. I now got rid of all cables that do not work. I'm a happy man.
Thanks all.
TheFrozen4 said:
I'm so happy you posted this.
Indeed, the issue is not the charger or my phone, but the cabling!
I have many cheaper and ultra-cheap USB cables, and some work and others don't. I now got rid of all cables that do not work. I'm a happy man.
Thanks all.
Click to expand...
Click to collapse
you are welcome.
i also used the app ampere https://play.google.com/store/apps/details?id=com.gombosdev.ampere
to test all my cables.. it was very surprising how many of the "quality cables" only provided usb charging while some "cheap cables" provided full power
(not dash power but way better than just usb current 200 - 500 mA)
Related
Hey guys,
I just plugged my note 4 into my car charger (anker charger, oem note 4 cable) and couldn't get it to charge. It charges my note 3 no problem.
I also have no problems charging my note 4 with wall chargers.
Any help?
I've got the "Anker® 18W / 3.6A Car Charger with Built-in Micro USB Cord for Android" and it's actually CHARGING my Note 4 when using GPS navigation and playing music! My Note 2 wouldn't charge, but it would hold charge under the same conditions.
What model charger are you using?
EP2008 said:
I've got the "Anker® 18W / 3.6A Car Charger with Built-in Micro USB Cord for Android" and it's actually CHARGING my Note 4 when using GPS navigation and playing music! My Note 2 wouldn't charge, but it would hold charge under the same conditions.
What model charger are you using?
Click to expand...
Click to collapse
I actually can't find it on the charger itself or even Amazon. It's relatively new, I thought it was a 2.0/2.1 amp charger (2x USB). Definitely Anker though.
clanderson said:
I actually can't find it on the charger itself or even Amazon. It's relatively new, I thought it was a 2.0/2.1 amp charger (2x USB). Definitely Anker though.
Click to expand...
Click to collapse
Are you using both usb's at the same time? If so, it's splitting the power, so you'll get a slow charge.
EP2008 said:
Are you using both usb's at the same time? If so, it's splitting the power, so you'll get a slow charge.
Click to expand...
Click to collapse
Sorry, I should have specified - the only thing plugged into the charger is my Note 4.
Shoot, maybe I just need to grab another charger. Thought I made a good decision with that Anker.
Thanks for your reply by the way
clanderson said:
Sorry, I should have specified - the only thing plugged into the charger is my Note 4.
Shoot, maybe I just need to grab another charger. Thought I made a good decision with that Anker.
Thanks for your reply by the way
Click to expand...
Click to collapse
If you get the one I listed, it works for sure. Great charger and it's been the only one my wife hasn't been able to destroy. :laugh:
Will the car charger also do the 50% in 30min charging ?
ilordvader said:
Will the car charger also do the 50% in 30min charging ?
Click to expand...
Click to collapse
Doubt it. You need a special charger for that.
Sent from my SM-N910U
EP2008 said:
Doubt it. You need a special charger for that.
Sent from my SM-N910U
Click to expand...
Click to collapse
Do you know if there's one available that will do that as of right now?
Costas86 said:
Do you know if there's one available that will do that as of right now?
Click to expand...
Click to collapse
No idea, but if there were to be one, I'd imagine that Samsung would have it first.
EP2008 said:
No idea, but if there were to be one, I'd imagine that Samsung would have it first.
Click to expand...
Click to collapse
Hmm.. this mentions rapid charging, I wonder if it's as fast as the wall charger
http://www.samsung.com/us/mobile/cell-phones-accessories/ECA-U21CBEBXAR
The only chargers that work with the new fast charging technology are ones that are purpose built and have the ability to switch between 9V and 5V,they are quite uncommon.
I have this charger http://www.amazon.com/gp/product/B00D82O68Y/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
and it charges my note 4 while running Waze and tethering my Radar Detector via Bluetooth (which also uses GPS)....and it charges my wife's S5 at the same time
Using an afer market 2.1a charger and an S3 cable, charges just fine.
ilordvader said:
Will the car charger also do the 50% in 30min charging ?
Click to expand...
Click to collapse
EP2008 said:
Doubt it. You need a special charger for that.
Sent from my SM-N910U
Click to expand...
Click to collapse
I believe Samsung has stated it's a 9v charger instead of the conventional 5v charger.
Did some more research and found this:
http://www.incipio.com/chargers/car-chargers/quick-charge-2-0-single-port-usb-charger.html#
From the Engadget review, "I clarified with Samsung that it chose a proprietary solution instead of licensing Qualcomm's QuickCharge tech, but it insisted that you could still use QuickCharge 2.0-compatible chargers to achieve the same results."
Also from http://www.samsung.com/sa_en/support/skp/faq/1063730?CID=AFL-hq-mul-0813-11000170
[FAQs] Smart Phone : Galaxy Note 4- To use fast charging, what kind of charger should be used?
Fast charging uses battery charging technology that charges the
battery faster by increasing the charging power. The Galaxy Note 4
device supports Samsung’s Adaptive Fast Charging feature and
Qualcomm Quick Charge 2.0.
To use Fast charging on your device, connect it to a battery charger
that supports Adaptive Fast Charging or Quick Charge 2.0.
Hope that helps someone, credit goes to the users over at http://forums.androidcentral.com/sa...-charger-supports-fast-charging-note-4-a.html
stock charger stopped working and phone no longer turbo charge.. tried a replacement that worked for 2 months and stopped as well.. phone only chargers with regular usb/chargers.. I'm guessing it's a software problem or could be hardware as well but I'm not the only one with this problem I'm sure.. Anyone have a fix?
Highly unlikely it is a software issue... The Moto X is very finicky about Turbo Chargers and the cable, always use a high quality cable and power supply, I recommend Eversame microUSB cables and Aukey QC 2.0 chargers (car or A/C), I have used them for a long time with no issues at all. Come to think of it, my original charger is probably still in the box, don't think I have ever used it. lol
acejavelin said:
Highly unlikely it is a software issue... The Moto X is very finicky about Turbo Chargers and the cable, always use a high quality cable and power supply, I recommend Eversame microUSB cables and Aukey QC 2.0 chargers (car or A/C), I have used them for a long time with no issues at all. Come to think of it, my original charger is probably still in the box, don't think I have ever used it. lol
Click to expand...
Click to collapse
Well I bought another charger off amazon and that didn't work as well.. Probably gonna give either chargers u mentioned a try... Just wanna hear everyone's views on this
I had a stock motorola charger stop working as well. I've moved on to higher quality cables like he said.
rossbeck said:
I had a stock motorola charger stop working as well. I've moved on to higher quality cables like he said.
Click to expand...
Click to collapse
So it's safe to say it's a cable problem.. I bought a similar charger like stock on Amazon and same problem.. Probably need to change brand like u said.. Waiting for other inputs
Just had the same thing happen to me literally a few minutes ago. Turbo charger isn't working so I have to use a regular one. Just ordered the cable and charger in acejavelin's post.
A Samsung charger from like the S7 will quick charge the phone. At least mine does. It even gives the TurboCharge toast after plugging it in.
Spasticdroid said:
A Samsung charger from like the S7 will quick charge the phone. At least mine does. It even gives the TurboCharge toast after plugging it in.
Click to expand...
Click to collapse
Interesting
Spasticdroid said:
A Samsung charger from like the S7 will quick charge the phone. At least mine does. It even gives the TurboCharge toast after plugging it in.
Click to expand...
Click to collapse
Yes, because that charger is QC2.0 compliant, I have used on of my son's S7 Edge chargers on more than occasion with no problems and it gets "Turbo charge" just fine... So will most other OEM chargers that are Quick Charge 2.0 compliant.
OK.... so i wanna know is it bad if i charge this phone with samsung adaptive charger ? and what about AUKEY USB-C Car Charger with 5V/3A USB C & Quick Charge 3.0?
My another problem is when i use oem charger my phone getting really hot like the back panel 110 degrees till almost 90% and then start cooling down, but i dont have this problem with samsung charger and my phone still charge pretty quick.
is anyone has the same situation?
The phone uses USB-C power delivery for charge spec. QC3 chargers don't work at all on my PH-1, seriously charges at .5amps. You're fine to use the Samsung charger or any other adaptive charger like Ankar power port chargers, they work fine.
Not sure about your phone getting hot using the stock charger though, mine doesn't do that.
bavarianblessed said:
The phone uses USB-C power delivery for charge spec. QC3 chargers don't work at all on my PH-1, seriously charges at .5amps. You're fine to use the Samsung charger or any other adaptive charger like Ankar power port chargers, they work fine.
Not sure about your phone getting hot using the stock charger though, mine doesn't do that.
Click to expand...
Click to collapse
So the phone will charge with an old USB Type-A charger and a Type-A to Type-C cable? What if it's not a QC3 charger like my Anker PowerDrive 2? I've read that some peoples phones charge slower than it uses power when using older chargers, but then some people say they charge ok, slower, but not that slow.
DrvLikHell said:
So the phone will charge with an old USB Type-A charger and a Type-A to Type-C cable? What if it's not a QC3 charger like my Anker PowerDrive 2? I've read that some peoples phones charge slower than it uses power when using older chargers, but then some people say they charge ok, slower, but not that slow.
Click to expand...
Click to collapse
Yeah the power port chargers work just fine. Just not QC3 chargers, in my experience.
*Deleted*
They didn't disable anything - it doesn't have the Qualicom Quick Charge variant, but it does have it's own variant of a rapid charge.
Using two wall chargers I have here and a Benson certified USB-C Cable, one of the wall chargers support QC2.0 and the other QC3.0. Both charged "normally" reporting on the screen as "Charging".
Using the stock USB-C wall charger that came with my 6P, using EX Kernel and the stock kernel from January 8.1 stock ROM, both reported "Charging Rapidly". I switched kernels using EXKM and a backup of the stock Kernel to test this.
Also, I bought a Tronsmart USB-C Car Charger, and it too reports "Charging Rapidly".
ZuneYT said:
Hey everyone,
So I got my nexus 3 Months ago, I just found out NOW that it is not fast charging at all. I bought a new ANKER charger and wire with it and its just charging slowly which got me really annoyed as I wasted money on it because I thought it had nothing to do with the phone at all. I did some digging around and the maker of franco kernel found out that bloody google disabled the bloody fast charging on the 6P?! What kind of solution is that? I mean they could of at least gave us options on whether to disable or enable it in the phone. Is there ANY way to get fast charging enabled on this phone?
Click to expand...
Click to collapse
Nexus 6p just charges at a higher amperage then most average phones. As long as you use a charger with 5V/3A you should get charging rapidly. Just remember as the battery percentage increases the amps get lower. Use an app like ampere to make sure your getting close to 3000mA. I think the highest charge I seen on the stock plug was like 2800mA.
Well I bought an ANKER Charger and usb cable with it which definitely says it is fast charging compatible. When it comes to charging my phone I got a small text on my lock screen showing me how much charge there is going to the phone while charging. The average charging mAh is 1,400 and the voltage is 4.3V. I am pretty sure that it has reached a higher charge rate....I'll have to keep an eye on it. Do you think thats an acceptable charging rate?
It's not just about amperage, because some of their chargers are a whopping 8A - https://www.anker.com/ca/products/108/203/Wall-Chargers
Anker doesn't support the variant of rapid charging that the 6P accepts, therefore it only will negotiate down to a normal "charging" rate, which IIRC is exactly what you're getting.
ZuneYT said:
Well I bought an ANKER Charger and usb cable with it which definitely says it is fast charging compatible. When it comes to charging my phone I got a small text on my lock screen showing me how much charge there is going to the phone while charging. The average charging mAh is 1,400 and the voltage is 4.3V. I am pretty sure that it has reached a higher charge rate....I'll have to keep an eye on it. Do you think thats an acceptable charging rate?
Click to expand...
Click to collapse
That's kind of low this one from the comments works. Sorry it's Canadian amazon but maybe can find in your are.
Exodusche said:
That's kind of low this one from the comments works. Sorry it's Canadian amazon but maybe can find in your are.
Click to expand...
Click to collapse
Well good news I found the plug from my past orders I just forgotten to look on my account haha.
This is it here https://www.amazon.co.uk/gp/product/B017VXARME/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
ZuneYT said:
Well good news I found the plug from my past orders I just forgotten to look on my account haha.
This is it here https://www.amazon.co.uk/gp/product/B017VXARME/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Noice yeah Amazon is good that way!! ?
I'm having this problem too. I used to be able to rapid charge using anker usb c to usb c but now it just seems to charge normally not rapid charge.
Anyone know of a fix, let me know.
Thanks
I found the wireless charing is extermely slow and even not charging , anyone has similar experience ? Please advise, thanks
This just happened to me today as I tried wireless charging for the first time. Was testing with Samsung 15W charger, gonna look for another charger to see what that does.
Edit: Samsung 15W charger with 25W power supply did not work, Oneplus 50W with 65W adapter worked. Tried the power bricks with both chargers, only 50W+65W combo worked. Looks like it is a little picky with chargers.
Epico Wireless Stand Pro also charging slowly. Charging also stops from time to time. Might be firmware issua?
Alignment seems to need to be pretty much perfect to work...
Already sick of waking up to an uncharged phone so have switched to wired for now.
sirleeksalot said:
Alignment seems to need to be pretty much perfect to work...
Already sick of waking up to an uncharged phone so have switched to wired for now.
Click to expand...
Click to collapse
Yeah. Tried with Samsung charger and it just slides away because of the glass back. This needs a stand to be useful.
Finneri said:
Yeah. Tried with Samsung charger and it just slides away because of the glass back. This needs a stand to be useful.
Click to expand...
Click to collapse
This was on one of those Ikea Qi chargers that are covered with fabric for grip... still very awkward to align.
You've reminded me that I do have a Qi charging stand somewhere though... I might dig that out and try it.
APanicek said:
Epico Wireless Stand Pro also charging slowly. Charging also stops from time to time. Might be firmware issua?
Click to expand...
Click to collapse
Try to change a good qualiy USB cable and test again, it helps for me
Pixel wireless charging stand 2nd Gen charges fine for me
launton said:
Pixel wireless charging stand 2nd Gen charges fine for me
Click to expand...
Click to collapse
Same here.
No issues with an "Amoner" 15W charging stand from Amazon.
Finneri said:
This just happened to me today as I tried wireless charging for the first time. Was testing with Samsung 15W charger, gonna look for another charger to see what that does.
Edit: Samsung 15W charger with 25W power supply did not work, Oneplus 50W with 65W adapter worked. Tried the power bricks with both chargers, only 50W+65W combo worked. Looks like it is a little picky with chargers.
Click to expand...
Click to collapse
Weird... For me with the OnePlus 50W charging station it continuously stops and restarts (or not even that). I'm using it with a 30W OnePlus adapter. Worked with my old device.
Interestingly, I also have the older, wired OnePlus stand with 30W and with that it seems to work.
dukaiii said:
Weird... For me with the OnePlus 50W charging station it continuously stops and restarts (or not even that). I'm using it with a 30W OnePlus adapter. Worked with my old device.
Interestingly, I also have the older, wired OnePlus stand with 30W and with that it seems to work.
Click to expand...
Click to collapse
I tried the 50W charger with 30W adapter, did not even start charging (just blinks red color on the charger). No problems with 65W adapter.
I have boat floatpad 350 ,it's not charging my nothing phone 1,as it's not detecting the divice itself,I have tried with Samsung S10 it's working,but nothing phone is not detecting.pls reply
I have the 100W Xiaomi Charging Station and it worked flawlessly before updating to 1.1.3. After the update the phone has to be adjusted to the mm to get it to charge.
I got a second NP1 with the same specs now and no issues with the wirless charging after the recent update.
So ill just return my first phone...
LinkseD said:
I have the 100W Xiaomi Charging Station and it worked flawlessly before updating to 1.1.3. After the update the phone has to be adjusted to the mm to get it to charge.
I got a second NP1 with the same specs now and no issues with the wirless charging after the recent update.
So ill just return my first phone...
Click to expand...
Click to collapse
So you means the first divices has the problem.
Yep.
1st device: 1.1.2 no problems, 1.1.3 charging issues when not placed accurately on the wirless pad
2nd device: 1.1.3 no problems
i use the BHHB Wireless charger stand T524-S, it charges up side down no problem, but right side up it stops charging after a few seconds, also sideways charging does work on these too
HasanulBanna said:
I have boat floatpad 350 ,it's not charging my nothing phone 1,as it's not detecting the divice itself,I have tried with Samsung S10 it's working,but nothing phone is not detecting.pls reply
Click to expand...
Click to collapse
My BMW has a charging box, same like a charging pad. When I put my phone inside, it doesn't charge.
I always need to hold the phone 1-2 cm above the charging pad for like 5 Seconds. Then it starts charging and I can lay it down on the pad.
It's like the phone has to perform any handshake with the charger first and when it is too close it doesn't work.
Maybe it works in the same way for you.
According to Ampere, the Nothing Phone 1 stop wireless charging as soon as it reaches 38 degrees (celsius), which is incredibly low
Wireless charging has been awesome for me. Mine charges wirelessly incredibly fast and I never have an issue. I've been using this charger .
yootech 7.5W/10W/15W Fast Wireless Charger,Wireless Charging Stand with Quick Adapter Compatible with iPhone 14/14 Plus/14 Pro/14 Pro Max/13/SE 2022/12,15W LG V35,10W Galaxy S21/S20/S10,Pixel 3/4XL https://a.co/d/hb4qd5w