Just saw this on XperiaBlog - http://www.xperiablog.net/2017/06/2...0-160/?utm_source=dlvr.it&utm_medium=facebook
Have any of you got the update? Any changes?
Still nothing on my Z5...
this firmware has appeared on xperifirm , but only version Australia and Philippines
Vengeance66 said:
Just saw this on XperiaBlog - http://www.xperiablog.net/2017/06/2...0-160/?utm_source=dlvr.it&utm_medium=facebook
Have any of you got the update? Any changes?
Still nothing on my Z5...
Click to expand...
Click to collapse
In xperiafirm on flashtoll u can see 2 firmwares are already downloadable. Australia and Phillipines
Whats new?
I have it installed. Don't see any major upgrades. Here's the link for the edited boot.img with the DRM fix and busybox (no twrp or root). I installed Magisk from TWRP, and
all is working fine.
https://drive.google.com/file/d/0B4OOpkCayJt6d2NqTHdXRC1xZ2M/view?usp=sharing
hegezolee said:
I have it installed. Don't see any major upgrades. Here's the link for the edited boot.img with the DRM fix and busybox (no twrp or root). I installed Magisk from TWRP, and
all is working fine.
https://drive.google.com/file/d/0B4OOpkCayJt6d2NqTHdXRC1xZ2M/view?usp=sharing
Click to expand...
Click to collapse
So you didn't root with magisk afterwards because it is not available for 7.1.1 or because you didn't want to?
Wasted1300RPEU said:
So you didn't root with magisk afterwards because it is not available for 7.1.1 or because you didn't want to?
Click to expand...
Click to collapse
What I meant is that SuperSu is not included in the boot image and I installed magisk separately afterwards from recovery.
klemen241 said:
Whats new?
Click to expand...
Click to collapse
Updating..
1 - Same Boot animation
2 - Same old UI with black statues bar
3 - We have a new bluetooth icon color in settings / and a new storage icon
4 - we have something called "Assist" in settings
5 - Finger print UI has been updated
6 - Something very cool is now u can use your phone while android is upgrading
7 - " Slow image sharping " has been fixed .. it is super fast now !
8 - Of course now we have shortcuts support but only in other launchers
9 - Call log still laggy
10 - User icon has been removed from lockscreen
hegezolee said:
What I meant is that SuperSu is not included in the boot image and I installed magisk separately afterwards from recovery.
Click to expand...
Click to collapse
Using this patched magisk version https://forum.xda-developers.com/crossdevice-dev/sony/patched-magisk-v12-sony-devices-t3582331 is not too fast?
After flash TWRP via fastboot I think it's only necessary to flash patched magisk, correct?
After update my E6683 won't recognize SD card ... as not inserted ... in other phone is ok! ...
cioce said:
Using this patched magisk version https://forum.xda-developers.com/crossdevice-dev/sony/patched-magisk-v12-sony-devices-t3582331 is not too fast?
After flash TWRP via fastboot I think it's only necessary to flash patched magisk, correct?
Click to expand...
Click to collapse
Just root with magisk official and dats all buddy ..
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
whalesplaho said:
Just root with magisk official and dats all buddy ..
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Click to expand...
Click to collapse
Is the magisk v13 beta ok for Sony devices? Because I see...
Known Unsupported Devices:
Sony Stock ELF Boot: Please refer to the info when flashing Magisk in custom recovery
Click to expand...
Click to collapse
hegezolee said:
What I meant is that SuperSu is not included in the boot image and I installed magisk separately afterwards from recovery.
Click to expand...
Click to collapse
Are you using TWRP 3.0.2 or 3.1.1 -> https://forum.xda-developers.com/crossdevice-dev/sony/twrp-3-1-0-z5-z5c-z5p-t3571050 ?
Some changes that I noticed so far:
- Many icons are round.
- 6 quick toggles in notification bar.
- June security patch.
- Something called Assist is added to menu.
- A57 cores get activated more often. 5 cores are active almost all the time.
Shouldn't 7.1.1 have night mode? I can't find it anywhere.
reza_v said:
Some changes that I noticed so far:
- Many icons are round.
- 6 quick toggles in notification bar.
- June security patch.
- Something called Assist is added to menu.
- A57 cores get activated more often.
Shouldn't 7.1.1 have night mode? I can't find it anywhere.
Click to expand...
Click to collapse
Looking your print screen the kernel 3.10.84 seems the same version compatible with Androplus v43 https://kernel.andro.plus/kitakami_r2.html
Would someone be very kind to make the deodex and the superuser mod ?
I tried to do it myself but i failed
reza_v said:
Some changes that I noticed so far:
- Many icons are round.
- 6 quick toggles in notification bar.
- June security patch.
- Something called Assist is added to menu.
- A57 cores get activated more often.
Shouldn't 7.1.1 have night mode? I can't find it anywhere.
Click to expand...
Click to collapse
Yhu shud see night mode when yhu hold n click on tha settings icon at tha top in tha notification screen....
---------- Post added at 03:29 PM ---------- Previous post was at 03:25 PM ----------
cioce said:
Is the magisk v13 beta ok for Sony devices? Because I see...
Are you using TWRP 3.0.2 or 3.1.1 -> https://forum.xda-developers.com/crossdevice-dev/sony/twrp-3-1-0-z5-z5c-z5p-t3571050 ?
Click to expand...
Click to collapse
Dahs what im presently using on stock 7.0.... No issues!!!
chitose_ndy said:
Would someone be very kind to make the deodex and the superuser mod ?
I tried to do it myself but i failed
Click to expand...
Click to collapse
I will try today. If i can i will do a post like i did with the .33 nougat fw.
GG Sony!
bungadudu said:
GG Sony!
Can somebody please post the ftf?
Xperifirm automatically unzipped the file......
Click to expand...
Click to collapse
https://xpericheck.com/device/E6653
How can i rooting
I tested all the versions
But the boot is looped
Related
Hi
Here is flasable zip file wich install latest ROM 23.0.1.A.4.44 which this time is customized TW, latest stable SuperSu v2.37 and latest beta Dualrecovery .154 for Tablet Z2 with read/write acces to system.
This is still KitKat update not Lollipop.
This is tested and works just fine though make nandroid backup before flashing.
Install it by flashing whole zip file with custom recovery. Wipes aren´t necessary but good practise.
Here is the link: https://mega.co.nz/#!JMJTGRSQ!3iFfopo_fAzdz-8S7vO4Km__yaR3HJQ0qhketuRZKmc
Deodex patch for above rom to those who want to use modifications which are made only for deodexed rom´s.
This is tested and works just fine but make nandroid backup before flashing.
Install deodex patch by:
- flashing deodex.zip file in custom recovery,
- don´t reboot to system but wipe at least dalvik-cache,
- reboot to system.
Here is the link to deodex patch: https://mega.co.nz/#!kIAygRyY!kYLzorXHJACwFC_NL5qjkWseWNfnFs7BitPwYf4dM34
Credits:
@Androxyde
@Chainfire
@Nut
@LaguCool
@zxz0O0
@AndroPlus
Update Installed and working fine everything's okay, thank you so much
Sony Xperia Tablet Z2 (511)
Bootloader Status: Unlockeable (Actually locked for warranty reasons)
Root: Yes
R/W system: Yes
Issue: Doesn't turn off..... when I try to turn it off it stays in "Turning off"
rokrd1579 said:
Update Installed and working fine everything's okay, thank you so much
Sony Xperia Tablet Z2 (511)
Bootloader Status: Unlockeable (Actually locked for warranty reasons)
Root: Yes
R/W system: Yes
Click to expand...
Click to collapse
You are welcome.
rokrd1579 said:
Issue: Doesn't turn off..... when I try to turn it off it stays in "Turning off"
Click to expand...
Click to collapse
I don't have this problem. Mine shuts down normally.
Lol. I just finished installing your 4.30 update and logged in to see this update. It worked fine by the way. Off to install this slightly newer update now!
This newer version works fine on my UK sgp512. Few changes to device and region in build.prop. Sony covers works fine for sleep and wake too.
Thanks very much for sharing this kulvertti. Much better than an ftf.
Thanks for this been waiting for root on this fw any chance you can deodex
Thanks a lot, works great as always!
It works well, it just unlocking via BT is still not functioning as it should.
Thank you all for your kind words. Haven't got time to deodex it yet but most likely near future. @rokrd1579 maybe it's because of some app or xposed module which do something to your power management?
Jeddix said:
I don't have this problem. Mine shuts down normally.
Click to expand...
Click to collapse
How did you install it? I cant solve this issue and i really want this update, also, I have notice that it gets more hot than previous version (4.4.2)
I installed it with Philz recovery and flashed it over the previous version without wiping.
RJASSI21 said:
Thanks for this been waiting for root on this fw any chance you can deodex
Click to expand...
Click to collapse
Deodex patch added to op.
kulvertti said:
Deodex patch added to op.
Click to expand...
Click to collapse
Yay ok thank you will flash it later
kulvertti said:
Deodex patch added to op.
Click to expand...
Click to collapse
Doesnt work says install aborted bad zip
---------- Post added at 10:45 PM ---------- Previous post was at 10:43 PM ----------
Can I manually push app framework and priv-app folder with correct permisions?
RJASSI21 said:
Doesnt work says install aborted bad zip
---------- Post added at 10:45 PM ---------- Previous post was at 10:43 PM ----------
Can I manually push app framework and priv-app folder with correct permisions?
Click to expand...
Click to collapse
Sorry to hear mate. Works fine here. Check MD5, it should be 1773c47febff57046e9f45657f5d9e1c. Also which custom recovery you are using? I used TWRP and checked again that uploaded deodex zip works correctly.
Never tryed what you are suggesting so I don´t know, but I doubt it will work.
kulvertti said:
Sorry to hear mate. Works fine here. Check MD5, it should be 1773c47febff57046e9f45657f5d9e1c. Also which custom recovery you are using? I used TWRP and checked again that uploaded deodex zip works correctly.
Never tryed what are suggesting so I don´t know, but I doubt it will work.
Click to expand...
Click to collapse
Ok i was using philz touch so ill try TWRP
Thanks for the ROM, I successfully installed this on a SGP512 tablet.
Now when looking in Settings > About tablet it shows up as a SGP511. Just curious how can I change this to SP512 again? Do I need to edit build.prop for this?
rosco_pc said:
Thanks for the ROM, I successfully installed this on a SGP512 tablet.
Now when looking in Settings > About tablet it shows up as a SGP511. Just curious how can I change this to SP512 again? Do I need to edit build.prop for this?
Click to expand...
Click to collapse
You are welcome. That's correct. Edit build.prop.
just loaded this on my 512 and it works great! changed build.prop to reflect my model and its good to go.
Thanks!
The first builds of Lineage are out for the shamu finally!
download.lineageos.org
How do I get rid of the ugly watermark across my screen?
The link to the nightly version doesn't work
Link to nightly worked fine for me. Haven't flashed yet, but it downloaded, albeit slowly.
https://download.lineageos.org/shamu
How to remove this cm to lineage migration build background ?
People who have the watermark did you flash the nighly or experimental?
From my understanding the experimental build is only used for migration from CM and will have that watermark no matter what, the nightly build should have no water mark. I believe they posted this info on their site.
You're supposed to flash nightly over experimental. Just read the instructions...
Dopamin3 said:
People who have the watermark did you flash the nighly or experimental?
From my understanding the experimental build is only used for migration from CM and will have that watermark no matter what, the nightly build should have no water mark. I believe they posted this info on their site.
Click to expand...
Click to collapse
can confirm - no watermark at nightly building!
Strange how everytime I try to download the nightly it fails. No matter what browser I use
first run with lineage - every thing works fine!
Does anyone know, how I can get SElinux "enforcing"? - other kernel? whichone? - need it for using Viper4Android
MartinN6 said:
first run with lineage - every thing works fine!
Does anyone know, how I can get SElinux "enforcing"? - other kernel? whichone? - need it for using Viper4Android
Click to expand...
Click to collapse
You mean permissive, but you can use stock kernel enforced, a bit tricky, you need to root with supersu, latest beta sr3 runs fine. Superuser from los page doesn't recognize viper4a for root at all. I flashed latest arise and supersu, reboot, viper4a still not recognized for root, uninstall viper4a driver, supersu recognize viper4a now, confirm it. Reboot to recovery and reflash latest arise. Now it's working.
If you want Dolby too you have to use blackbird kernel and stay permissive.
coremania said:
You mean permissive, but you can use stock kernel enforced, a bit tricky, you need to root with supersu, latest beta sr3 runs fine. Superuser from los page doesn't recognize viper4a for root at all. I flashed latest arise and supersu, reboot, viper4a still not recognized for root, uninstall viper4a driver, supersu recognize viper4a now, confirm it. Reboot to recovery and reflash latest arise. Now it's working.
If you want Dolby too you have to use blackbird kernel and stay permissive.
Click to expand...
Click to collapse
Thanks for advice!!
And yes of course - sorry - I mean "permissive"
I flashed "Viper4Android_Cleaner_v1_3_Android_7x.zip" and than "ViPER4Android_2.5.0.5_guitardedhero.zip"
... and it works without any trouble ...
MartinN6 said:
Thanks for advice!!
And yes of course - sorry - I mean "permissive"
I flashed "Viper4Android_Cleaner_v1_3_Android_7x.zip" and than "ViPER4Android_2.5.0.5_guitardedhero.zip"
... and it works witout any trouble ...
Click to expand...
Click to collapse
Good, if it works that easy, but there was something about the cleaner, don't remember right now exactly, but it breaks something. May it was dolby.
Edit: using the cleaner always kills cast connection, that's why I didn't use it anymore
MartinN6 said:
first run with lineage - every thing works fine!
Does anyone know, how I can get SElinux "enforcing"? - other kernel? whichone? - need it for using Viper4Android
Click to expand...
Click to collapse
Kernel Adiutor Mod should let you toggle that (requires root) under the Misc Controls tab. I would imagine the ad-filled subpar original Kernel Adiutor from the Play Store would too but I wouldn't recommend using that.
Is there an updater built in or do we flash all updates? Reading in other threads that ppl get a update notification when a new build is available. I'm on experimental cuz the nightly link didn't work when I tried last night
Dopamin3 said:
Kernel Adiutor Mod should let you toggle that (requires root) under the Misc Controls tab. I would imagine the ad-filled subpar original Kernel Adiutor from the Play Store would too but I wouldn't recommend using that.
Click to expand...
Click to collapse
Thanks!
I got it and it (Kernel Adiutor mod) works great!
Now AdAway works again (need SElinux permissiv) - that's very good!
Guys, whats your baseband or radio? My proximity sensor isn't working properly on LineageOS...
MartinN6 said:
Thanks!
I got it and it (Kernel Adiutor mod) works great!
Now AdAway works again (need SElinux permissiv) - that's very good!
Click to expand...
Click to collapse
How did you get those SOFT keys from. Pixel
hashtag_harsh said:
How did you get those SOFT keys from. Pixel
Click to expand...
Click to collapse
sorry I don´t understand what you mean with "SOFT keys" ?
Edit: Aah now I know!
Yes, it's from the mod - link next post! ->
hashtag_harsh said:
How did you get those SOFT keys from. Pixel
Click to expand...
Click to collapse
https://forum.xda-developers.com/nexus-6/themes-apps/cool-pixel-mod-android-7-1-1-t3532951
Here you go
---------- Post added at 19:57 ---------- Previous post was at 19:54 ----------
LeroViten said:
Guys, whats your baseband or radio? My proximity sensor isn't working properly on LineageOS...
Click to expand...
Click to collapse
Latest
https://forum.xda-developers.com/ne...-nexus-6-recovery-flashable-fastboot-t3066052
Hi everybody,
I want to show you how to install Viper4android on your phone running developer preview 3 or later with Android O.
IM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR PHONE!!
First download the zip from Androidfilehost or from below.
Zip
https://www.androidfilehost.com/?fid=673368273298967857
Busybox
https://www.androidfilehost.com/?fid=961840155545578665
Extract it to any folder, you will have two files now, a Viper4android App and a flashable Viper4android zip.
Reboot into recovery and install the zip, I also recommend a custom kernel like the Jolla Kernel which already has Android O support for loudness control (for my Nexus 5X).
Boot normally install BusyBox and launch Viper4android.
Select install drivers, grant root permission and wait until it is installed.
If a IO Error occurrs don't worry it'll work anyway.
Reboot and open any file manager.
Delete the Viper4android folder in "/system/priv-app".
Delete "/system/vendor/etc/audio_effects".
Install Viper4android app you downloaded before.
Reboot once again and open Viper4android - driver are working now.
Tested on my Nexus 5X with Android 8 developer preview 3.
Leave a like if it helped.
Reserved
Kindly share BusyBox APK.. as play store busy box unable to work.. can't install properly..
vijaygogawale said:
Kindly share BusyBox APK.. as play store busy box unable to work.. can't install properly..
Click to expand...
Click to collapse
Ok
Done Androidfilehost link is uodated
Thargorsson said:
Ok
Done Androidfilehost link is uodated
Click to expand...
Click to collapse
App installed.. but busy box not installed.. error
vijaygogawale said:
App installed.. but busy box not installed.. error
Click to expand...
Click to collapse
Which device do you have and which Android kernel, android version etc... I need Basic information.
Thargorsson said:
Which device do you have and which Android kernel, android version etc... I need Basic information.
Click to expand...
Click to collapse
Device Angler,
Kernel Stock,
Android 8 DP3,
vijaygogawale said:
Device Angler,
Kernel Stock,
Android 8 DP3,
Click to expand...
Click to collapse
Systemless root?
And which supersu
Thargorsson said:
Systemless root?
And which supersu
Click to expand...
Click to collapse
Magisk v13,
vijaygogawale said:
Magisk v13,
Click to expand...
Click to collapse
Aha I've only tested with latest supersu that might be the problem.
Try the 2.82 version.
Thargorsson said:
Aha I've only tested with latest supersu that might be the problem.
Try the 2.82 version.
Click to expand...
Click to collapse
Will try and report back
vijaygogawale said:
Will try and report back
Click to expand...
Click to collapse
Good. btw did you deleted the old Viper4android folder and installed the new app as user app? And changing enforce to permissive also fix some problems.
Thargorsson said:
Good. btw did you deleted the old Viper4android folder and installed the new app as user app? And changing enforce to permissive also fix some problems.
Click to expand...
Click to collapse
Working now, phonograph not supported.
vijaygogawale said:
Working now, phonograph not supported.
Click to expand...
Click to collapse
Cool
Anybody get this working on Pixel XL (Marlin) on 8.0 - Sept security release? SuperSu 2.82 - SR4
jbirdyRazr said:
Anybody get this working on Pixel XL (Marlin) on 8.0 - Sept security release? SuperSu 2.82 - SR4
Click to expand...
Click to collapse
Hows the exact process you wen through?
I have not implemented yet. Was wondering if anybody else had. Now using SuperSu 2.82-SR5 and TWRP 3.1.1.0. Now that TRWP works now without having to fastboot, I will try this mod. If I get it working I will let you know.
Ah k
I went through the entire procedure including deleting the system app and installing the io fix version.
The app tells me that drivers are working but i there is no difference in sound.
Turing Master power on and off dosen't seam to make any diffrence. What is going on?
snehgada said:
I went through the entire procedure including deleting the system app and installing the io fix version.
The app tells me that drivers are working but i there is no difference in sound.
Turing Master power on and off dosen't seam to make any diffrence. What is going on?
Click to expand...
Click to collapse
Which device, Rom and kernel? And also which music player are you using? Also try enabke developer options in Viper and select disable selinux and/or enable FX compatibility mode.
Hey guys, I just want to share another AOSP ROM that I found; Its a russian ROM, and the most stable a usable one I have tested.
*Compatible with xposed
*Menu button already set to show recent apps
*No GAPPS included (I flashed Open GAPPS pico and worked perfectly)
*Google camera working acceptably (not as fast as MIUI but better camera quality and stability than other ROMs)
*WiFi working at full speed (some AOSP ROMs appear to have a laggy wifi
*Bluetooth working fine (I'm using a MIband2 all the time with no problems)
*Multilanguage
Note: I flashed gapps right after the rom, the first start its a bit longer that the other roms (8 minutes in my case) after entering gaccount it delay a bit to confirm the account information, but after that works perfectly; you may install google web view system afterwards directly from the playstore.
Note 2: It appear to be a 3.4 version for this rom, but the links are down and probably wont work again.
Note 3: I'm just informing about this ROM cause I haven't read of it in this forum, I'm not the developer so, I'm not resposible of any problem you've got.
Original thread: https://4pda.ru/forum/index.php?showtopic=783613&st=400#entry57704575
ROM download link: https://drive.google.com/drive/folders/0B-qqAX5mnU7PX3V5QVVSTkJ3UzA
No 3.4 are online you must log in into the forum ... You download from 4pda servers...
Regards ... Yes nice rom thanks
yasars said:
No 3.4 are online you must log in into the forum ... You download from 4pda servers...
Regards ... Yes nice rom thanks
Click to expand...
Click to collapse
Thanks for that!
Need to install the patch zip file simountaneously?
hard to register since all is in russian during the account creation proccess/captcha etc (no translation support )
can anyone post a link or mirror on the 3.4? just seen that its an update of 40mb
can anyone be so kind?
I found this:
http://www88.zippyshare.com/v/dQMSHVDf/file.html
Update 3.4 is only 40mb big...
cinotec said:
Need to install the patch zip file simountaneously?
Click to expand...
Click to collapse
I didn't install it.
Bug battery ...since noon the device is charging and is still in 78%
Enviado de meu Redmi Note 4 usando Tapatalk
azeredo21 said:
Bug battery ...since noon the device is charging and is still in 78%
Enviado de meu Redmi Note 4 usando Tapatalk
Click to expand...
Click to collapse
That's strange, the charging and battery performance are fine for me.
thanks for posting man!
Is Magisk support?
goonoth said:
Is Magisk support?
Click to expand...
Click to collapse
It's pre-rooted with SU.
is cofface based?
after installing the update 3.4 zip, phone is stuck in MI logo
it works normally with me didnt face any trouble.
flashed through twrp 3.1.1.1 > aosp 3.3 > patch > 3.4
SalPhobos said:
It's pre-rooted with SU.
Click to expand...
Click to collapse
I wonder if I can use safetynet pass with this ROM, that is why I ask if it is support Magisk or not
on other aosp roms, my data sometimes show (!) marks, indicates the data is down, and I need to turn it off or activate airplane mode then turn it back on to make the data works (hoanguye and project x aosp rom). it never happen on global stable.
got any similiar issues?
ps: I know I should better try this myself, but it is not hurt to ask
thanas said:
it works normally with me didnt face any trouble.
flashed through twrp 3.1.1.1 > aosp 3.3 > patch > 3.4
Click to expand...
Click to collapse
Hey, where did you get TWRP 3.1.1.1 ?
---------- Post added at 01:09 AM ---------- Previous post was at 01:03 AM ----------
yasars said:
No 3.4 are online you must log in into the forum ... You download from 4pda servers...
Regards ... Yes nice rom thanks
Click to expand...
Click to collapse
Can i borrow your account ? I can't register because i can't complete the capcha thing
Nguyễn Thế Vinh said:
Hey, where did you get TWRP 3.1.1.1 ?
---------- Post added at 01:09 AM ---------- Previous post was at 01:03 AM ----------
Can i borrow your account ? I can't register because i can't complete the capcha thing
Click to expand...
Click to collapse
if u look for 3.4
are u the creator of modded aosp? recently I found about the data problem, sometimes it gives (!) note and have to turn it off and on again to bring it back to normal (wifi too), can u fix it please, I do really love ur rom, with nova xposed gravitybox fstb, its awesome
yasars said:
I found this:
http://www88.zippyshare.com/v/dQMSHVDf/file.html
Update 3.4 is only 40mb big...
Click to expand...
Click to collapse
rouenmod said:
if u look for 3.4
are u the creator of modded aosp? recently I found about the data problem, sometimes it gives (!) note and have to turn it off and on again to bring it back to normal (wifi too), can u fix it please, I do really love ur rom, with nova xposed gravitybox fstb, its awesome
Click to expand...
Click to collapse
Wat ?
No I'm not
I'm just a normal user
You may confused me with other Vietnamese guy
Hey guys here it is drm fix for free.
1.download TWRP here https://dl.twrp.me/maple/twrp-3.2.1-0-maple.img.html put device into fastboot mode and install twrp.
2.download kernel for your device in here:
G8142:https://androidfilehost.com/?fid=890129502657596858
G8141:https://androidfilehost.com/?fid=890129502657596596
And download drm fix here:link:https://mega.nz/#!LRoFkSDA!bOsnRRE1gRpAZ0su-bZMfUjvMB7aRkLEc3V63bOuKnM
And of course you must download magisk too go in to recovery by press vol down+power when phone is off.then flash kernel and then magisk an then drm fix and you done it.
Give me a thanks if you find that useful.
that's what I call a real XDA post, a post of community sharing and support, as in the good old days! it's nice to see that! fortunately there are still people like you! I appreciate ! :good::laugh:
Did someone test it and can give me a feedback? I'm a little afraid to brick my mobile^^
i did all the steps now the camera won't take a picture at all ? any thoughts
davethemac2016 said:
i did all the steps now the camera won't take a picture at all ? any thoughts
Click to expand...
Click to collapse
Yeah same here, TWRP works a treat but the stock camera app wont take a picture so not even as far as a green pic lol
Tried other camera apps also like Camera FV-5 but same issue..
So the DRM fix kernal is exclusive for either G8141 or G8142
but the DRM patch fixes both G8141 & G8142 phones?
Can someone confirm please
netwave said:
Yeah same here, TWRP works a treat but the stock camera app wont take a picture so not even as far as a green pic lol
Tried other camera apps also like Camera FV-5 but same issue..
So the DRM fix kernal is exclusive for either G8141 or G8142
but the DRM patch fixes both G8141 & G8142 phones?
Can someone confirm please
Click to expand...
Click to collapse
my guess is G8141 as i have the dual sim and it did not work same issues as you i did also reflash my phone that did not help either
davethemac2016 said:
my guess is G8141 as i have the dual sim and it did not work same issues as you i did also reflash my phone that did not help either
Click to expand...
Click to collapse
I flashed the G8141 file for my single sim phone
---------- Post added at 04:43 PM ---------- Previous post was at 04:02 PM ----------
Sorted the issue...
The DRM fix download link from above was the problem, If you get the latest XperiFIX tool you can get your camera working on the latest firmware build as I just did.
Although to date XperiFIX does not work for me as a standalone tool the latest build in the settings tab has a list of supported devices with links to the TWRP images, DRM XperiFIX files etc.
Just copy & paste your phones column to notepad & seperate the links, your looking for the XperiFIX.zip link
Being that the DRM XperiFIX kernel belongs to STORM it's better to just buy the latest tool, rather than me share his work & cut his profits.
Thanks Blackghosthm for this useful post, it helped me figure out the problem I've had since unlocking my bootloader
netwave said:
I flashed the G8141 file for my single sim phone
---------- Post added at 04:43 PM ---------- Previous post was at 04:02 PM ----------
Sorted the issue...
The DRM fix download link from above was the problem, If you get the latest XperiFIX tool you can get your camera working on the latest firmware build as I just did.
Although to date XperiFIX does not work for me as a standalone tool the latest build in the settings tab has a list of supported devices with links to the TWRP images, DRM XperiFIX files etc.
Just copy & paste your phones column to notepad & seperate the links, your looking for the XperiFIX.zip link
Being that the DRM XperiFIX kernel belongs to STORM it's better to just buy the latest tool, rather than me share his work & cut his profits.
Thanks Blackghosthm for this useful post, it helped me figure out the problem I've had since unlocking my bootloader
Click to expand...
Click to collapse
i got it fixed download these too and flash in twrp make sure your on .145
davethemac2016 said:
i did all the steps now the camera won't take a picture at all ? any thoughts
Click to expand...
Click to collapse
Dude I'm used g8142 kernel and it works perfectly.im not used g8141 but I flashed g8141 too and this works even on my device.
I used 2 different files in the storm thread and they worked the files up above didn't work for me or another person don't know why but I have it now. Kudos to the free solution provided much appreciated
davethemac2016 said:
I used 2 different files in the storm thread and they worked the files up above didn't work for me or another person don't know why but I have it now. Kudos to the free solution provided much appreciated
Click to expand...
Click to collapse
I personally used them and they worked and as I know miustone stock rom use this kernel too.
Blackghosthm said:
Hey guys here it is drm fix for free.
1.download TWRP here https://dl.twrp.me/maple/twrp-3.2.1-0-maple.img.html put device into fastboot mode and install twrp.
2.download kernel for your device in here:
G8142:https://androidfilehost.com/?fid=890129502657596858
G8141:https://androidfilehost.com/?fid=890129502657596596
And download drm fix here:link:https://mega.nz/#!LRoFkSDA!bOsnRRE1gRpAZ0su-bZMfUjvMB7aRkLEc3V63bOuKnM
And of course you must download magisk too go in to recovery by press vol down+power when phone is off.then flash kernel and then magisk an then drm fix and you done it.
Give me a thanks if you find that useful.
Click to expand...
Click to collapse
kernel not compatible with magisk 16.4
karrouma said:
kernel not compatible with magisk 16.4
Click to expand...
Click to collapse
Well it's my kernel, and magisk 16.4 is working fine with it. What's not compatible?
shoey63 said:
Well it's my kernel, and magisk 16.4 is working fine with it. What's not compatible?
Click to expand...
Click to collapse
God bootloop.
I have dual sim version , when turning on the phone takes long on xperia logo the bkack screen with magisk 16.4
With 16.3 works fine
karrouma said:
God bootloop.
I have dual sim version , when turning on the phone takes long on xperia logo the bkack screen with magisk 16.4
With 16.3 works fine
Click to expand...
Click to collapse
A little confused by the variety of responses. So, it's just Magisk 16.4 that isn't compatible with 8142? Just trying to sort out which circumstances work. I have the 8142 and am looking for a simple way to patch the DRM issues without going too far from stock.
ultyrunner said:
A little confused by the variety of responses. So, it's just Magisk 16.4 that isn't compatible with 8142? Just trying to sort out which circumstances work. I have the 8142 and am looking for a simple way to patch the DRM issues without going too far from stock.
Click to expand...
Click to collapse
Kernel not comoatible with latest magisk.
U can use 16.3
For DRM use storm fix
shoey63 said:
Well it's my kernel, and magisk 16.4 is working fine with it. What's not compatible?
Click to expand...
Click to collapse
OK, so I'm on the dual SIM G8142 and I'm trying to sort out my DRM patch and wanting to keep things stock. I tried JanJan's fix and didn't work for me and the Turbo ROM has a few too many tweaks for me. I'm on the latest 145 with only TWRP installed, no root or other customizations.
Will this be problematic with the dual SIM version?
Working 100%
NO green pics , Magisk 16.4
xzp dual (G8142) Custormized CE1 .145
1.enter into TWRP
2.install AndroPlusKernel v12 for drmpatch
3.install Magisk 16.4
4.install the drmpatch
5.Wipe cache & dalvik
Done
g4500ok said:
Working 100%
NO green pics , Magisk 16.4
xzp dual (G8142) Custormized CE1 .145
1.enter into TWRP
2.install AndroPlusKernel v12 for drmpatch
3.install Magisk 16.4
4.install the drmpatch
5.Wipe cache & dalvik
Done
Click to expand...
Click to collapse
Working xzp (G8141) Stock rom.145
1. TWRP
2. G8141-145drmfix-kernel. zip
3. Magisk 16.4
4. drmpatch
5. Wipe chace & dalvik
If the camera does not work, install XperiFIX Woala!
Sir I am more concern what will happened in next update?
shoey63 is no longer gonna patch kernels via xperfix in support of //storm
so the maple kernel you have given is actually made by him for his modded rom ....