Hello guys, I just wanted to know if I can install a firmware of another region on my note 4
for example: Installing N910C firmware on N910U model number
Please help
It's impossible.
Are you serious?
It would be much better if people knew where to post threads like this...also I don't think you can do that.
Its not possible to flash between model numbers, however its possible to flash firmware from another region... As long as its the same model number.
I know you can flash C on H as long as you remove the modem file first.
Respected Dev.
i have an I9505 but its board has been changed and now i dont know which board is install but one of my friend install a rom and that is some how like "XXUHOE2" but i dont know that the board is compatible to that or not ? can i flash UK or USA or any other region firmware as i have a problem in CM ROM. Lost signal after few minutes of restart. no clear idea.
Find the model number by booting into download mode. Once you have the model number, flash the appropriate rom.
Listen please check this link. would it help me to recovered the phone from the unknown baseband
https://www.unlocksamsungonline.com/free-baseband-repair/Galaxy%20S4/#instructions
Guys, i have a question.
I have Moto G4 plus XT1644 US Variant. But i dont know the exact number, Can anybody tell me the risk if im not flashing the right number ?
For example, i found this 4
- XT1644_ATHENE_RETUS_MPJ24.139-48_cid50_subsidy-DEFAULT_regulatory-XT1644_CFC.xml.zip
- XT1625-XT1644_ATHENE-RETUS_MPJ24.139-49_cid50_subsidy-DEFAULT_CFC.xml.zip
- XT1625-XT1644_ATHENE-RETUS_MPJ24.139-48_cid50_subsidy-DEFAULT_CFC.xml.zip
- XT1625-XT1644_ATHENE_RETUS_MPJ24.139-64_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
If my phone is MPJ24.139-64 and im flashing the MPJ24.139-48. Can it work ? what is the risk ? and the difference between those number ?
And i also found NPJ24 build number. what is the difference ? im pretty sure my device is MPJ24 not NPJ24.
current condition in bootloop
Hello, i try to upgrade the galaxy S7 G930V with a custom rom OREO system. But the Phone try to boot into the system and later the phone shut down automatic. Later i try to enter again the stock finware and i bricked the phone. But the phone right now enter in download mode and when i try by odin enter the stock rom, The odin says failed all time. And when i put the phone in download mode i see in the top left of the screen the phone says G930A and know i used a custom rom and maybe i make a big mistake but the only i need right now is enter the stock rom. I buy a new Galaxy S9 but i wanna sell this S7 in good condition.Thanks i wait for the best tips for resolved this problem.
Boot into download mode and post the build number that it shows.
CVertigo1 said:
Boot into download mode and post the build number that it shows.
Click to expand...
Click to collapse
The Buil number is the SKU or the SN?
billaboy said:
The Buil number is the SKU or the SN?
Click to expand...
Click to collapse
Download mode should at least tell you the model number and possibly the build number (example G930UUEU4BRD1). Once we know what model and firmware you have we can better assist. If you have a CDMA model that currently identifies as either 930V or 930U, I'd suggest trying one of the firmwares here (U variant firmwares): https://www.sammobile.com/firmwares/galaxy-s7/SM-G930U/ If you want latest verizon and want phone back on 930V model (V variant), I'd go with latest from here: https://www.sammobile.com/firmwares/galaxy-s7/SM-G930V/
Better yet, boot into recovery and give the build number. It will start with G930xxxxxxxxx. For example, mine reads G930VVRS4BRA1.
Once you post your build number, I can send you a link to the firmware you can use to make it boot.
CVertigo1 said:
Better yet, boot into recovery and give the build number. It will start with G930xxxxxxxxx. For example, mine reads G930VVRS4BRA1.
Once you post your build number, I can send you a link to the firmware you can use to make it boot.
Click to expand...
Click to collapse
Lol I knew I saw my build somewhere when I was trying to debrick! Thank you
Edit: XDA posts screwing up, sorry for double post.. Mods/admins plz fix
CVertigo1 said:
Better yet, boot into recovery and give the build number. It will start with G930xxxxxxxxx. For example, mine reads G930VVRS4BRA1.
Once you post your build number, I can send you a link to the firmware you can use to make it boot.
Click to expand...
Click to collapse
Hi...I'm not sure if I know how to do or if it's even possible to do what you've suggested
I don't know if its "bricked" because I don't really know what that is...what I do know is, I can't even get to the Google keyboard " in order to bypass the previous owners Google account.
I really want to use this S7 I purchased and if you could help I would be in your debt
Kribgal13 said:
Hi...I'm not sure if I know how to do or if it's even possible to do what you've suggested
I don't know if its "bricked" because I don't really know what that is...what I do know is, I can't even get to the Google keyboard " in order to bypass the previous owners Google account.
I really want to use this S7 I purchased and if you could help I would be in your debt
Click to expand...
Click to collapse
Google " How to boot into recovery mode in Samsung S7 by Varizon"
You will find how, then get the required info,
Hope it will help
Hi,
I wanted to give my international n910f to my granmda in turkey, the problem is that currently the turkey takes huge fees to use german phones in their country permanently, I heard there is a Method whith which I can change the Imei of the phone to an existing old phone from turkey, I Know I have to edit the qcn file and for that I need qpst, but Qpst does not find my phone.
Is there any alternative method for that maybe someone here can help me I would be really glad.
Can no one help me with this?
I also need to edit / restore my IMEI number in SM-N910c variant
After flashing a Custom ROM the singnals are gone I can't make calls
I've read and followed many things but no luck still
There are few computer software like Octaplus Box and Samsung Pro Tools etc...
Can someone guide me how to edit IMEI number using these programs?