Hello! First, sorry for my bad english. In December after I install Android Nougat with Odin my pc doesn't recognized my phone. I tried different method but no one resolve my problem. I tried to :
1. Install drivers manually
2. Activate USB debugging from developers option
3. Connect my phone to different PC (Win 7/8/10 and Mac)
4. Factory reset
5. Change cable.
At device mannager appear Unknown USB Device and I install Samsung drivers manually.
My phone is not rooted.
PLEASE HELP ME!
does your phone charge when the cable is plugged into your computer ?
Prior to upgrade what type of connection did you have MTP or something else ?
My phone is charging when i plug in computer and is selected mtp connection .
Related
I am trying to connect my Note 3 to my computer and it will not mount as a device that is visible under windows. It was taken for service and when it came back it only connects to the PC as an ADB device, but not MTP when it is fully booted. I can flash firmware while in Odin, I can connect in bootloader mode, I just can not make it visible to transfer files from the computer directly to the phone via cable. Under device manager it says 'SAMSUNG Android ADB Interface'. USB debugging changes nothing either. My S3 shows ADB and MTP but the Note does not. I have attempted with multiple cables on 2 computers and get the same result. If anyone has a suggestion of a way to fix this without having to wipe again, I'd love to hear it. Thanks in advance.
I just got the 6P on Amazon, used-like new. It has 6.0.1 with TWRP installed. When I plug in the short USB-C cable into my W10 PC, it doesn't detect anything. So I go enable debugging mode, turn on USB-Debugging and go down to "Select USB Configuration" and it is set to Charging. The problem is that it won't let me select any other modes other than Charging. It does charge when it is plugged in so the cable is working in some aspect. W10 device manager doesn't show any new USB device or unknown devices when plugged in.
So I reboot into Bootloader and Windows still doesn't detect any device. I tried all the other USB ports. So I'm not quite sure how to get this device to connect to the computer or to just get it to factory stock.
And in TWRP, the log shows MTP enabled and Windows still doesn't recognize it.
Hi Basically plugged my S4 i9505 in via usb. Nothing shows in my computer, but phone remains charging. I have tried uninstalling and reinstalling all samsung usb drivers but it does nothing. Tried installing kies/older usb drivers, still no luck. Regardless of if there are drivers or not on my pc, there is no detection what so ever. My pc is detecting my second S4 I9505 perfectly. Anyone know the solution to this?
majorr92 said:
Hi Basically plugged my S4 i9505 in via usb. Nothing shows in my computer, but phone remains charging. I have tried uninstalling and reinstalling all samsung usb drivers but it does nothing. Tried installing kies/older usb drivers, still no luck. Regardless of if there are drivers or not on my pc, there is no detection what so ever. My pc is detecting my second S4 I9505 perfectly. Anyone know the solution to this?
Click to expand...
Click to collapse
Tap 5 times buildnumber in settings menu under: about phone to open developer settings. Enable USB debugging. Now you can choose what to do when phone is plugged in pc.
lekiaM said:
Tap 5 times buildnumber in settings menu under: about phone to open developer settings. Enable USB debugging. Now you can choose what to do when phone is plugged in pc.
Click to expand...
Click to collapse
USB debugging is Enable still nothing happen
USB debugging is not required in order to have the phone recognized by the computer.
Have you tried different USB cables and USB ports? Is the phone detected on other computers?
i had the same problem.... and we found out that the pins or the usb connection sh1t from the phone doesn`t make good contact. si try to push a little but or force up and down the usb cable to the usb from phone maybe you will manage to find a stable connection or something.
when i connect to phone to the pc i have to hold the usb cable connected to the phone in a weird position. that works for me
Hi
i cant connect my OP5 ( two days ago it worked) to my laptop
changed cables and usb ports with not success
this is what i am getting
"Currently, this hardware device is not connected to the computer. (Code 45)"
and after this i dont see even the yellow mark on the device manager
please assist
thanks
Sounds to me like an driver issue. Just install the platform tools again, reboot pc and connect your phone again. Or enable ADB and USB debugging again in Developers Options and reboot device.
Hi
How do i enable adb on the phone ?
Usb debug i enabled but it didnt helped
Help! i want to flash official firmware -GT i9500
In past i was able to flash via odin on same pc and now its not showing usb all driver installed
already try changing data cable and diffrent ports i even tried reinstalling win7 and diffrent version of kies and drivers
i dont have other pc or laptops . other samsung phone is showing on download mode on same pc.
odin only shows my phone when i pull battery while connected to usb on download mode and i can flash twrp recovery or
any small size file but cant flash full firmware its disconect after some seconds
it connects well on mtp mode and twrp.
I have the same problem with my S4. I tested J5 2016 and it is connecting properly with the same cable, drivers, etc, either with odin or in normal situations when phone is on. also S8+ connects with its cable and same drivers, etc. But S4 is repeatedly connecting-disconnecting, either in downloading mode or normal situations.
I installed this driver "https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows" which is "SAMSUNG USB Driver for Mobile Phones 1.5.51".
imanam said:
I have the same problem with my S4. I tested J5 2016 and it is connecting properly with the same cable, drivers, etc, either with odin or in normal situations when phone is on. also S8+ connects with its cable and same drivers, etc. But S4 is repeatedly connecting-disconnecting, either in downloading mode or normal situations.
I installed this driver "https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows" which is "SAMSUNG USB Driver for Mobile Phones 1.5.51".
Click to expand...
Click to collapse
Already tried it didnt work. i dont have disconnecting issue on normal mode i can send and recive via usb mtp to pc for your disconnect problem if it disconnect after phone screen off, go to control panel>sytem &security>power option>change paln setting>change advanced power setting>expand all usb setting =enable change to disable.
If anyone has solution to OP please reply
Thank you!
I eventually succeed! Nothing special just used my brothers' laptop (win 7). same cable, same driver (1.5.51).
My primary problem was WiFi and Bluetooth not working. I was hopeful flashing will solve it but unfortunately no. Seems a hardware problem.
With your recommendation (enable to disable) i saw no change with my pc (win 7).