I read alot around here but I'm still confused...
No way to update by TWRP?
mini review - Thread & way to install Kangvip ROM
zappomax said:
I read alot around here but I'm still confused...
No way to update by TWRP?
Click to expand...
Click to collapse
Check this thread - > https://forum.xda-developers.com/mate-8/general/mini-review-nxt-l29c432b581-guide-how-t3620079
Excellent step by step guide to update to B581 - follow all the instructions & you will be on B581 (blackinfinity did a fantastic job)
:good::good::good::good:
Samavb said:
Check this thread - > https://forum.xda-developers.com/mate-8/general/mini-review-nxt-l29c432b581-guide-how-t3620079
Excellent step by step guide to update to B581 - follow all the instructions & you will be on B581 (blackinfinity did a fantastic job)
:good::good::good::good:
Click to expand...
Click to collapse
I saw it before. It's recommended only for non rooted and locked devices.
zappomax said:
I saw it before. It's recommended only for non rooted and locked devices.
Click to expand...
Click to collapse
I used that method and I was on B560 rooted and unlocked (and with a modified boot.img). Be sure to re-install the stock recovery (not TWRP).
no way ...
harryhase said:
no way ...
Click to expand...
Click to collapse
Can U explain?
zappomax said:
Can U explain?
Click to expand...
Click to collapse
Flash original unrooted B560 via TWRP and wait for OTA.
Hmm I got OTA for L29C432B581 today but I'm on unlocked bootloader, rooted and on TWRP so I haven't tried to accept the update. As I understand it, it won't work to update given that I don't have stock recovery.
Skickat från min HUAWEI NXT-L29 via Tapatalk
Leo_83 said:
Hmm I got OTA for L29C432B581 today but I'm on unlocked bootloader, rooted and on TWRP so I haven't tried to accept the update. As I understand it, it won't work to update given that I don't have stock recovery.
Skickat från min HUAWEI NXT-L29 via Tapatalk
Click to expand...
Click to collapse
You need stock boot.img and system or the OTA will fail. Just download B560 full and flash it in TWRP, that will unroot, restore stock system, restore stock boot.img, restore stock recovery. Then you can install OTA without any issues (you do not have to lock your bootloader).
Boosik said:
You need stock boot.img and system or the OTA will fail. Just download B560 full and flash it in TWRP, that will unroot, restore stock system, restore stock boot.img, restore stock recovery. Then you can install OTA without any issues (you do not have to lock your bootloader).
Click to expand...
Click to collapse
B560 it's not just only the usual "update.zip" file, there's also the "update_full_hw_eu.zip" file.
If I reinstal B560 again just to get the B581 OTA, have I to reinstal both files or only "update.zip"??
Thx in advance!!
zappomax said:
B560 it's not just only the usual "update.zip" file, there's also the "update_full_hw_eu.zip" file.
If I reinstal B560 again just to get the B581 OTA, have I to reinstal both files or only "update.zip"??
Thx in advance!!
Click to expand...
Click to collapse
Flash both just to be sure (it will NOT wipe your data or configuration).
Boosik said:
Flash both just to be sure (it will NOT wipe your data or configuration).
Click to expand...
Click to collapse
Thx
I suppose that also the "Dload" methot should be work in case my phone misses the OTA, right?
Did flashing both files work for you zappomax?
To answer my own question, i did a fresh install of 560 through twrp following this thread: https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c432b560-official-t3540042 , but without installing rootfiles. After phone set up update to 581 was offered in system update. Tried to install (796 Mb update) but failed to pass verification.
After reboot in 'old' 560 connected phone to hisuite which offered me the full (2.2Gb) update to 581. This one installed without problems.
Rooted with Magisk afterwards.
My solution is to flash stock boot.img and update using hisuite..i was in 560 before..
Boosik said:
Flash both just to be sure (it will NOT wipe your data or configuration).
Click to expand...
Click to collapse
Not true, It will wipe everything.
svmsonite said:
Not true, It will wipe everything.
Click to expand...
Click to collapse
Nope, it didn't wipe anything on my phone, just do not factory reset/wipe.
Anyone know how to find stock boot.img? Im om b581, L29?
---------- Post added at 02:06 PM ---------- Previous post was at 01:52 PM ----------
Nirak said:
To answer my own question, i did a fresh install of 560 through twrp following this thread: https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c432b560-official-t3540042 , but without installing rootfiles. After phone set up update to 581 was offered in system update. Tried to install (796 Mb update) but failed to pass verification.
After reboot in 'old' 560 connected phone to hisuite which offered me the full (2.2Gb) update to 581. This one installed without problems.
Rooted with Magisk afterwards.
Click to expand...
Click to collapse
Is it possible to just download the b180 update.zip and ...full_hw...zip, and flash? Instead of flashing the old b560 zips?
From 581 to 180 is a downgrade, so i guess you need to flash a downgrade package before you can flash 180 software.
boot loop after flashing boot.img, recovery.img, system.img, cust.img through fastboot. I also wipe data and cache after flashing
Related
How can i unroot and install the original recovery
Nvm, already got it.
Could you explain how to do or provide a link? I want to turn back to stock recovery and unroot my phone
Sent from my ALE-L21 using xda premium
Fedroid said:
Could you explain how to do or provide a link? I want to turn back to stock recovery and unroot my phone
Sent from my ALE-L21 using xda premium
Click to expand...
Click to collapse
I used fastboot to install the stock recovery which i got form:
http://www.rootjunkysdl.com/?device=Huawei P8 Lite&folder=Firmware
I used these links to do it:
https://www.youtube.com/watch?v=UN7XW4HnFT8
https://www.youtube.com/watch?v=YfWYKREeQeQ
And then installed the offical rom through the stockrecovery by putting the dload folder on my micro-SD
http://forum.xda-developers.com/android/development/huawei-p8-p8-lite-stock-rom-firmware-t3176374
For some reason all apps and things were still on my phone afterwards, i hope it will help you.
I have done it, but when i install Ota it stucks at 11%...
Sent from my Moto G using xda premium
Fedroid said:
I have done it, but when i install Ota it stucks at 11%...
Sent from my Moto G using xda premium
Click to expand...
Click to collapse
Have you tried it when the file was on SD card and internal storage?
Fedroid said:
I have done it, but when i install Ota it stucks at 11%..
Click to expand...
Click to collapse
Some Updates can't be installed over the b136.
The german b170 (a partial update) needs the b132 or the b133 to upgrade to b170. Directly update from b136 to b170 isn't possible
EpicBas said:
Have you tried it when the file was on SD card and internal storage?
Click to expand...
Click to collapse
I have tried both with no results.
---------- Post added at 06:05 PM ---------- Previous post was at 06:02 PM ----------
spkahal said:
Some Updates can't be installed over the b136.
The german b170 (a partial update) needs the b132 or the b133 to upgrade to b170. Directly update from b136 to b170 isn't possible
Click to expand...
Click to collapse
I have two Ale_21.
One is stock and never modified and went from 136 to 170 without problems.
The problem is with the other "modified phone", in some way I think ota detects
it was modified before and gives error.
EpicBas said:
I used fastboot to install the stock recovery which i got form ...
Click to expand...
Click to collapse
Could you please be a little more specific?
You mean you downloaded stockrecovery.img form here
Code:
rootjunkysdl.com/files/Huawei%20P8%20Lite/Firmware/stockrecovery.img
? And then you startet the phone in fastboot mode with the command
Code:
adb reboot bootlader
? Last you send the command
Code:
fasboot flash recovery stockrecovery.img
?
I already regret installing TWRP since I can't even try to install further Updates via dload. So I just don't want to make any more mistakes and/or brick the phone.
@Schwedenbitter
Yes that's pretty much what I have done.
You need to have the right version in order to install via update
From where i can get stock recovery for marshmallow b550, because every recovery i try stuck on 90 or 5%. I tried also to extract update.app b550 and it also fail
Expans said:
From where i can get stock recovery for marshmallow b550, because every recovery i try stuck on 90 or 5%. I tried also to extract update.app b550 and it also fail
Click to expand...
Click to collapse
B550
you have dual sim or single sim?
Dual sim
then download the link from my post .. it's for ds
And i can just flash that zip from twrp ?
VladHD said:
You need to have the right version in order to install via update
Click to expand...
Click to collapse
Right version of what? The recovery.img?
Expans said:
And i can just flash that zip from twrp ?
Click to expand...
Click to collapse
No you need to extract it with huawei update extractor to get the recovery.img
And you need to install it with fastboot.
Schwedenbitter said:
Right version of what? The recovery.img?
Click to expand...
Click to collapse
The current software version of your phone.
EpicBas said:
The current software version of your phone.
Click to expand...
Click to collapse
Yes,not every update is compatibile with the current version of your software.
Expans said:
And i can just flash that zip from twrp ?
Click to expand...
Click to collapse
You need to extract from update.app and flash via fastboot with this command: fastboot flash recovery recovery.img
how can I apply the updater after flashing custom recovery (twrp)?
Basically you can't, applying OTA requires stock recovery.
And just one thing, 1.64GB for an update? I mean there isn't much in the changelog
altvolt74 said:
how can I apply the updater after flashing custom recovery (twrp)?
Click to expand...
Click to collapse
i just updated mine with TWRP and it did went well only issue I had was that i needed to reflash TWRP and SuperSu that full update replaces the TWRP recovery remember to go back to developer setting to allow oem unlock to be able to reflash TWRP in fastboot otherwise you won't be able to
altvolt74 said:
how can I apply the updater after flashing custom recovery (twrp)?
Click to expand...
Click to collapse
Do you know how to install stock recovery?!
PalakMi said:
Do you know how to install stock recovery?!
Click to expand...
Click to collapse
There is no need to have stock recovery you can do it with TWRP I've just done it myself
JEANRIVERA said:
There is no need to have stock recovery you can do it with TWRP I've just done it myself
Click to expand...
Click to collapse
That's cool, but how?!
I was notified about the update on the phone and then just pressed the update now button and it restarted in TWRP and installed by itself
That's great, I'll never have to worry about OTAs
It doesnt work for me , reboot in twrp, search to flash the update and error.. ( not full update, my update is about 616 Mo )
Nas42O said:
It doesnt work for me , reboot in twrp, search to flash the update and error.. ( not full update, my update is about 616 Mo )
Click to expand...
Click to collapse
Mine was full update sorry
Do this means it works only with full updates?!
PalakMi said:
Do this means it works only with full updates?!
Click to expand...
Click to collapse
most likely
Also how can I extract the stock recovery using fastboot before I flash twrp
altvolt74 said:
Also how can I extract the stock recovery using fastboot before I flash twrp
Click to expand...
Click to collapse
Use this Huawei Update Extractor tool ... http://forum.xda-developers.com/attachment.php?attachmentid=3262545
Where does the EMUI Updater store downloaded updates on the phone? I would like to store a copy before rooting (just in case) and haven't found a web download for FRD-L04C567B141.
Florp said:
Where does the EMUI Updater store downloaded updates on the phone? I would like to store a copy before rooting (just in case) and haven't found a web download for FRD-L04C567B141.
Click to expand...
Click to collapse
@clsA can give you an answer
Florp said:
Where does the EMUI Updater store downloaded updates on the phone? I would like to store a copy before rooting (just in case) and haven't found a web download for FRD-L04C567B141.
Click to expand...
Click to collapse
U can download B141 here.
http://www.hihonor.com/us/support/software-list/index.html
Sent from my HUAWEI VIE-L29 using XDA Labs
Mostar088 said:
U can download B141 here.
http://www.hihonor.com/us/support/software-list/index.html
Sent from my HUAWEI VIE-L29 using XDA Labs
Click to expand...
Click to collapse
I'm only finding B122 on that site.
They'll upload it later
Florp said:
I'm only finding B122 on that site.
Click to expand...
Click to collapse
OK, here is an update. I am rooted with TWRP and have been waiting for the full update package to become available. As of just yesterday the full update package is in the updater app on the phone. You must be connected to wifi for it to appear. Open updater, click on menu on the bottom, download latest FULL package B141. After DL it WILL FLASH THROUGH TWRP but you will lose root and TWRP. Let it do its thing then reflash TWRP through ADB and SU after that and you are good to go on the new update.
Hi!
I'm looking for a way to either root/twrp v1.2.0b02 (coming from stock files), or a way to apply the ota on a twrp'd/rooted v1.2.0b01.
I have tried this guide without luck starting from the point where the tool tries to flash twrp. when the phone tried to reboot into bootloader it just rebooted to the system.
With this guide i can't apply B02 as i get a mismatch error (forgot what the actual message was called).
any ideas?
thanks in advance!
edit: further information: i am currently on 7.1.1 b01 with unlocked-BL/twrp/root thanks to this guide, BUUUT i can not update from that to b02.
when i flash stock recovery and try to update via ota i get a "package mismatch" error during the update installation process while in the (stock-) recovery.
1. Which version are you running?
2. are you already unlocked and
rooted?
If yes, just flash stock recovery with axon7tool and update your system in the usual way. If done, flash back TWRP and supersu. Done.
Gesendet von meinem ZTE A2017U mit Tapatalk
Its a good question. For e.g. I'm on b10 G version rooted. How to come to A2017GV1.2.0B02 rooted?
Just the same. Install stock recovery and follow the update process as described everywhere in this forum.
marcus.linkenbach said:
1. Which version are you running?
2. are you already unlocked and
rooted?
If yes, just flash stock recovery with axon7tool and update your system in the usual way. If done, flash back TWRP and supersu. Done.
Gesendet von meinem ZTE A2017U mit Tapatalk
Click to expand...
Click to collapse
1.
[...]or a way to apply the ota on a twrp'd/rooted v1.2.0b01.
Click to expand...
Click to collapse
2. trying it right now.
edit: results in a package mismatch.
Flaîm said:
1.
2. trying it right now.
edit: results in a package mismatch.
Click to expand...
Click to collapse
What ended in a package mismatch? Flashing the recovery or updating? (Sorry, didn't see your first quote)
Sent from my ZTE A2017U using XDA Labs
marcus.linkenbach said:
What ended in a package mismatch? Flashing the recovery or updating? (Sorry, didn't see your first quote)
Sent from my ZTE A2017U using XDA Labs
Click to expand...
Click to collapse
the update itself.
Hello,
I'm on A2017GV1.2.0B02, and I'd like to root it.
I have installed adb and axon7toolkit, but it seems there's no stock recovery anymore since 7.x firmware. So when I issue adb edl reboot, the phone is just rebooting the OS. :/
Which steps must I follow for rooting my stock A2017GV1.2.0B02 ?
Thanks.
Jeremy-X said:
Hello,
I'm on A2017GV1.2.0B02, and I'd like to root it.
I have installed adb and axon7toolkit, but it seems there's no stock recovery anymore since 7.x firmware. So when I issue adb edl reboot, the phone is just rebooting the OS. :/
Which steps must I follow for rooting my stock A2017GV1.2.0B02 ?
Thanks.
Click to expand...
Click to collapse
the command to edl is: adb reboot edl.
To boot into recovery it's just power + vol+ button.
But since nougat you cannot boot into bootloader anymore. This would be necessary to unlock the bootloader. Therefore you would have to follow the steps I already mentioned in this thread.
Sent from my ZTE A2017U using XDA Labs
---------- Post added at 01:49 PM ---------- Previous post was at 01:41 PM ----------
Flaîm said:
the update itself.
Click to expand...
Click to collapse
B01 is what? Android 7.0 or 7.1.1? If you are already on 7.1.1 you don't have to flash anything. You will receive the update to B02 OTA. Otherwise you have to follow the official steps to get where you want to be. Described a lot on xda.
Sent from my ZTE A2017U using XDA Labs
Thanks for the answer, but there's no recovery for the B02 7.1.1.
Jeremy-X said:
Thanks for the answer, but there's no recovery for the B02 7.1.1.
Click to expand...
Click to collapse
You are triyng to update your sistem with twrp and the stock update.
you need to go back to stock recovery, aply update from system, wait for process and then, reboot edl, and reflash recovery.
then from recovery root
Flaîm said:
I have tried this guide without luck starting from the point where the tool tries to flash twrp. when the phone tried to reboot into bootloader it just rebooted to the system.
Click to expand...
Click to collapse
My stuff was for reinstalling TWRP on an unlocked phone after Nougat deleted it.
You should try axon7toolkit and see if that does the stuff. Another way around would be to downgrade your phone to B10 (Marshmallow) via MiFavor's update by sd thingy, (i'm not 100% sure if it lets you get to mm from nougat, but it's definitely worth a shot) then trying the BL unlock thread (NOT mine!)
Choose an username... said:
My stuff was for reinstalling TWRP on an unlocked phone after Nougat deleted it.
Click to expand...
Click to collapse
ooooh! guess i misinterpreted the guide then. i never had the problem to begin with as i already unlocked my bootloader on 6.0b10.
ayways, i am currently on 7.1.1 b01 with twrp/root thanks to this guide, BUUUT i can not update from that to b02.
when i flash stock recovery and try to update via ota i get a "package mismatch" error during the update installation process inside the (stock-) recovery.
Flaîm said:
ooooh! guess i misinterpreted the guide then. i never had the problem to begin with as i already unlocked my bootloader on 6.0b10.
ayways, i am currently on 7.1.1 b01 with twrp/root thanks to this guide, BUUUT i can not update from that to b02.
when i flash stock recovery and try to update via ota i get a "package mismatch" error during the update installation process inside the (stock-) recovery.
Click to expand...
Click to collapse
Okay that happened to me. By "this guide" you mean what I posted close to the end right? the xda app just shows me the last post lol
Try to download the full B02 package. Some guy mirrored the full package on one of the B02 posts. Then try to use MiFavor's own updater. It worked for me, can't see why you couldn't use that
Choose an username... said:
Okay that happened to me. By "this guide" you mean what I posted close to the end right? the xda app just shows me the last post lol
Click to expand...
Click to collapse
here's the non-bb coded link https://forum.xda-developers.com/axon-7/how-to/guide-reinstall-twrp-root-update-to-t3578552
Choose an username... said:
Try to download the full B02 package. Some guy mirrored the full package on one of the B02 posts. Then try to use MiFavor's own updater. It worked for me, can't see why you couldn't use that
Click to expand...
Click to collapse
didn't see a b02 fota, sorry. mind linking it?
Flaîm said:
ooooh! guess i misinterpreted the guide then. i never had the problem to begin with as i already unlocked my bootloader on 6.0b10.
ayways, i am currently on 7.1.1 b01 with twrp/root thanks to this guide, BUUUT i can not update from that to b02.
when i flash stock recovery and try to update via ota i get a "package mismatch" error during the update installation process inside the (stock-) recovery.
Click to expand...
Click to collapse
enable bootloader unlock in developer settings...
pelelademadera said:
enable bootloader unlock in developer settings...
Click to expand...
Click to collapse
hmm...
(attachment)
Flaîm said:
ooooh! guess i misinterpreted the guide then. i never had the problem to begin with as i already unlocked my bootloader on 6.0b10.
ayways, i am currently on 7.1.1 b01 with twrp/root thanks to this guide, BUUUT i can not update from that to b02.
when i flash stock recovery and try to update via ota i get a "package mismatch" error during the update installation process inside the (stock-) recovery.
Click to expand...
Click to collapse
You'll always get that mismatch regarding what you do or try. You'll need a custom made twrp flashable zip. Tron1 and I have tried to make one but no success. We will try to make a full flashable zip based on the full image.
Even if you flash your stock recovery back and do the OTA, you'll always get a mismatch regardless what others might say.
raystef66 said:
You'll always get that mismatch regarding what you do or try. You'll need a custom made twrp flashable zip. Tron1 and I have tried to make one but no success. We will try to make a full flashable zip based on the full image.
Even if you flash your stock recovery back and do the OTA, you'll always get a mismatch regardless what others might say.
Click to expand...
Click to collapse
that's what i was afraid of.
guess the zips again will be split into bootstack and system like his other flashable images, right?
Flaîm said:
that's what i was afraid of.
guess the zips again will be split into bootstack and system like his other flashable images, right?
Click to expand...
Click to collapse
Most likely.
So this week i hadn't time enough to install the august update since my phone is rooted so i decided to do it now. What i did before trying to download the update :
1.Deleted all magisk modules that i had then rebooted
2.Unistalled magisk using restore image then rebooted
3.Went to sys update downloaded and it says installation failed
What do to? I'm not rooted now and i don't have twrp installed.
PS. don't want to install it via fastboot/miflash
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
emiljano539 said:
PS. don't want to install it via fastboot/miflash
Click to expand...
Click to collapse
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542
sipollo said:
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542
Click to expand...
Click to collapse
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash
emiljano539 said:
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash
Click to expand...
Click to collapse
You won't lose your data.
ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
flashed the stock boot image tried to install it but again it shows that error , i guess the only thing i can do is to flash it manually via fastboot/miflash
sipollo said:
You won't lose your data.
Click to expand...
Click to collapse
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?
emiljano539 said:
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?
Click to expand...
Click to collapse
It doesn't matter. You'll have to reinstall Magisk (if you want to).
sipollo said:
It doesn't matter. You'll have to reinstall Magisk (if you want to).
Click to expand...
Click to collapse
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?
emiljano539 said:
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?
Click to expand...
Click to collapse
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.
sipollo said:
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.
Click to expand...
Click to collapse
I installed the zip from twrp and now after reboot i am stucked in bootloop now i can't even boot into twrp. What to do?
After i flashed it in the end says:
Failed to mount /system Invalid argument
Which TWRP did you use?
sipollo said:
Which TWRP did you use?
Click to expand...
Click to collapse
the official one. what version should i use?
its funny now that i flashed the stock rom via mi flash tool and now again the installation shows error..
ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
I'm facing same issue and I was following the guide.
Same here, can't install set Ota, even after remove magisk.
Other thing, cell won't show screen to put pin to boot, previous pin of sim so I think encryption is disable!? Any idea?
I've got my February ota. I removed magisk root via unistall in the app but I can't install the update.
Does anyone know how to make it work?
Thanks
Had same problem. Flashing with mi flash january firmware using the clean All and lock option Solved It. On the other hand you are going to loose camera2api.
faffu41 said:
Had same problem. Flashing with mi flash january firmware using the clean All and lock option Solved It. On the other hand you are going to loose camera2api.
Click to expand...
Click to collapse
Where did you get the january firmware for mi flash?
Xharos said:
Where did you get the january firmware for mi flash?
Click to expand...
Click to collapse
http://en.miui.com/download-333.html
faffu41 said:
Had same problem. Flashing with mi flash january firmware using the clean All and lock option Solved It. On the other hand you are going to loose camera2api.
Click to expand...
Click to collapse
Same problem here
Mi flash and clean all is the only way to solve the problem?
I never used Mi flash... can i go directly also if I have root and Magisk?
am2012 said:
I've got my February ota. I removed magisk root via unistall in the app but I can't install the update.
Does anyone know how to make it work?
Thanks
Click to expand...
Click to collapse
I had the same issue but hitting "try again" button fixed it and the installation went through flawlessly.
morcio said:
I had the same issue but hitting "try again" button fixed it and the installation went through flawlessly.
Click to expand...
Click to collapse
Tried 3 times and failed every time
Not yet received the Feb 19 update !
Can you sent ota capture link?
I just updated to Feb patch. I followed the Magisk guide and the install worked perfectly. https://github.com/topjohnwu/Magisk/blob/master/docs/tutorials.md#ota-installation
The January update made my phone slow and stutter at times and there as a very big battery drain. This had never happened to me for any update before. I am happy to say that the Feb update has made my phone fast again. I will check battery usage after a full charge tonight.
Same to me. I tried many times and it still fail to install the update. Now i can't install magisk 18.1 either.
Same problem here.
I'm on stock 10.0.4.0 Rom.
Uninstalled Magisk and even installed original boot.img from unzipped Stock.zip via hotbooted TWRP.
But installation still fails.
Any Ideas?
I really would like to avoid a full wipe with MiFlashtool
Lucky-thirteen said:
Same problem here.
I'm on stock 10.0.4.0 Rom.
Uninstalled Magisk and even installed original boot.img from unzipped Stock.zip via hotbooted TWRP.
But installation still fails.
Any Ideas?
I really would like to avoid a full wipe with MiFlashtool
Click to expand...
Click to collapse
A full wipe is necessary, you allowed on twrp modifications on system, for safety, take a backup and a full wipe
https://github.com/topjohnwu/Magisk/blob/master/docs/tutorials.md#ota-installation
I agree. I always do and work well.
GabiML said:
A full wipe is necessary, you allowed on twrp modifications on system, for safety, take a backup and a full wipe
Click to expand...
Click to collapse
Thanks a lot for your answer.
But one more (noob)question:
Someone uploaded the Feb Update as ".zip"file (271 MB) in the [Fastboot][OTA] thread.
Is it installable like a ROM Dirtyflash? In other words just flash it via fastboot boot twrp.img --> Install --> xxxx.zip?
Lucky-thirteen said:
Same problem here.
I'm on stock 10.0.4.0 Rom.
Uninstalled Magisk and even installed original boot.img from unzipped Stock.zip via hotbooted TWRP.
But installation still fails.
Any Ideas?
I really would like to avoid a full wipe with MiFlashtool
Click to expand...
Click to collapse
Flash system.img and boot.img only. Absolutely no need for full reflash or data wipe.
There is a high chance that you have some app which mounts system as R/W, so you'll have the same issues with next OTA update again.
---------- Post added at 08:11 AM ---------- Previous post was at 08:08 AM ----------
GabiML said:
A full wipe is necessary, you allowed on twrp modifications on system, for safety, take a backup and a full wipe
Click to expand...
Click to collapse
Not true. It is enough to reflash system.img and boot.img only. OTA update engine checks only these two partitions for modifications.
faffu41 said:
Had same problem. Flashing with mi flash january firmware using the clean All and lock option Solved It. On the other hand you are going to loose camera2api.
Click to expand...
Click to collapse
Me too, can anyone help me with the stock boot.img of the february ota?
I got a February update (Serbia).
There are no visible changes, but I have the impression that the system is more stable and faster. some of the things I had this morning did not report a microphone error.
Whether Xiaomi corrected it or it was just my impression.
I would like to hear other people who have updated the update
My phone was not routed and it was on stock 10.0.4.0 and now it's 10.0.5.0 version
_mysiak_ said:
Flash system.img and boot.img only. Absolutely no need for full reflash or data wipe.
There is a high chance that you have some app which mounts system as R/W, so you'll have the same issues with next OTA update again.
---------- Post added at 08:11 AM ---------- Previous post was at 08:08 AM ----------
Not true. It is enough to reflash system.img and boot.img only. OTA update engine checks only these two partitions for modifications.
Click to expand...
Click to collapse
Thank you! I will try it next time.
I went for the MiFlash CleanAll solution. Which, of course, works without a problem.
Can I block the automatic download of updates?, I have limited data and don't like them forced on me. (I liked oreo a lot more than pie).
Enviado desde mi UMI_SUPER mediante Tapatalk