i own a Samsung galaxy Spica i5700..the problem is that it is not able to boot... its not switching on ..when i connect to the charger it starts charging and when i press the end button ( power on/power off) the charging symbol disappears .... and i m not able to go into recovery nor in download mode ..i just want to go into the download mode so that i can flash it again ...please let me know if i bricked my samsung galaxy spica ??? is it possible to unbrick it??
please help me .... thanks in advance
I have the same problem.. i flashed a too big bootlogo, and now phone does nothing at all..
Hope someone could give us some advice, because i have no warranty...
hi i have a jig which you can buy from ebay it puts my i5700 into download mode.still not sure if it will help because i was changing the firmware on mine and it just loads the boot screens. i have forgoton how to get recovery using the buttons,it allso does the galaxy s and s11
If you have flashed too big bootlogo, then end. Trully bricked.
USB jig doesn't work on Spica.
Samsung_saad: what did you do before brick spica?
Unbrick!!
addictivetips.com/mobile/one-click-unbrick-for-samsung-phones-having-odin-guide/
When I originally rooted my phone, I used Odin... I haven't tried this particular method for unbricking, but apparently it works.
Hope that helps
I tried the one click unbrick method. Wasent working for me.
In the original post it says that it works with all devices using Odin 3. Is a while ago, but i think to remember i was using Odin 2.x the last times for flashing.
Eaven it dident work for me, might still be worth a try for you.
The button combination for download mode is "volume down + camera + power"
As long as you can get into that mode you're safe and the phone is not bricked!
Hi all!
I have a rather major problem.
Today Kies told me that I have a new upgrade for the firmware of my Samsung Galay S i9000. It ran stuck rom with only a few apps installed. I said i want to upgrade so it started to check everything, done a backup of my contacts, started to download the firmware on my PC. So far everything is good.
After that the phone rebooted into an android working logo and said "Downloading..." it stayed like this for a while and after that Kies gave an error. Now the phone is stuck on this screen. Disconecting the device from the usb cable and pluging it back in does't do anything. Kies tries to connect to it but after a couple of minues gives an error that the device is not responding and I should try to rebot the device.
Any idea what to do? This is the work phone so I have to fix this.
Any help is appreciated.
EDIT: Fixed the problem with odin. I know I should get a warning for not searching first...but I panicked.
Easy stuff to fix, start by posting in the right section.
Sent from my GT-I9000 using XDA Premium App
hi guys
i tried to flash a rom using odin but while it was uploading the firmware it got disconected
then it all happened
the screen just got black and the device didnt work at all
i cant log in into recovry mood non the download mood
nothing works
the device is dead
any ideas???
pleeeeeeeeeeeeeeeeeeeeeeeez help guys
its not even my device
the guy is all over me plz help asap
wich Rom did you Flash?
more information needed. Was it P6800, GT-P6210 Wifi Only? or verizon model?
you said Tab7, you may be in the wrong forum but thats OK, just describe the device as best as possible.
what is the exact firmware you tried to flash?
Disconnecting during a flash is very bad.
Do you have experience with Odin and flashing in general?
does the device seem to receive any power when plugged in?,
does your computer make any sounds when you connect the USB to it?
mmm lets see its p1000 and the rom was a stock rom ...
i had some experience in odin i flashed my galaxy s plus i9001 a hundred times with odin but this was the 1st time flashing a tab..
anyway the phone is dead no sign of any reaction in charging just blank screen
no sound from the computer when try to connect
nothing
bob wali said:
mmm lets see its p1000 and the rom was a stock rom ...
i had some experience in odin i flashed my galaxy s plus i9001 a hundred times with odin but this was the 1st time flashing a tab..
anyway the phone is dead no sign of any reaction in charging just blank screen
no sound from the computer when try to connect
nothing
Click to expand...
Click to collapse
The P1000 forum is here:
http://forum.xda-developers.com/forumdisplay.php?f=752
I guess you should post over there.
And this one will possibly help you: http://forum.xda-developers.com/showthread.php?t=1133590
I rooted my lg g2 D802, put cwm recovery and flashed cyanogenmod 11. It worked perfectly for 80 hours, when my battery died. I tried to recharge it but my phone won't boot anymore, I only see lg logo. I can't get into recovery, but i can get into download mode. I tried flashing stock ROM through PC but it doesn't work. PC recognizes phone in ports but when I start Flashtool it just says "Waiting for Connection". After reading tons of threads about bricked phones, it seems that phone has to have USB debugging enabled. When i flashed cyanogenmod USB debugging was disabled. And now my phone is bricked with USB debugging disabled.
Please help me to restore my phone, I'm desperate now. I've been trying various methods for 3 days and nothing seems to work. What should I do?
I managed to recover my phone.
blackdeath995 said:
I managed to recover my phone.
Click to expand...
Click to collapse
HOW?
blackdeath995 said:
I managed to recover my phone.
Click to expand...
Click to collapse
Please tell how, I'm trying to unbrick my phone for hours..
If you have lg logo use lg support tool. I had the same problem and it restores my phone to factory firmware. Dont get scared if you see a lot of ?????????? On lg suppor tool. Just look for the options.....check where the options are before connecting phone because when plugged letters change to ??????. Works 100% for me.
Sent from my LG-D801 using XDA Premium 4 mobile app
My case is different, here's the thread http://forum.xda-developers.com/showthread.php?t=2694212
Stefanakii said:
Please tell how, I'm trying to unbrick my phone for hours..
Click to expand...
Click to collapse
To be completely honest, I'm not sure how exactly did I manage to unbrick it. I tried to dig something with adb and fastboot. I don't know what exactly did I do but I didn't get any visible result. In my desperation I tried to enter recovery (power + down) once again (after at least 10 attempts during these 3 days) and it somehow worked. Then I flashed ROM that was already in my memory. It seems that my problem was consequence of OTA update.
I'm new with android so I'm still noob. I'm sorry that I can't help more.
i have a same problem if u solve it
Did you try doing an upgrade recovery using LG Mobile Support Tool on Windows 7 machine?
Hi, i want to fix a phone of my friend by flashing it with odin, but things go wrong, the phone after failing wont start or respond to any button, i dont know what to do, please any help would be appreciated
Samsung Galaxy J1 SM-J100H
Edit:
Thanks xEmre66 for your reply, unfortunately no, i think i break the boot image, the phone wont boot on download mode even if i use 300k jig, i think the only solution is to use an sd card filled with the boot image, but i dont find in website a solution like that.
I tryed many solution but no one work, please if someone have the some problem tell me.
Can you get into the DownloadMode? (ODIN MODE)???
Sent from my SM-J100H using XDA-Developers mobile app
---------- Post added at 08:58 AM ---------- Previous post was at 08:57 AM ----------
I have this phone but it is not my main phone but maybe I can help you.
Sent from my SM-J100H using XDA-Developers mobile app
i'm working on this problem..
i resolved,
share there
OSKCHAST said:
i resolved,
share there
Click to expand...
Click to collapse
Please can you share the solution ?, i cant fix the phone.
same problem here
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
caseres84 said:
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
Click to expand...
Click to collapse
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
xEmre66 said:
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
Click to expand...
Click to collapse
same in here. I flash original rom from sam mobile site and my samsung sm-j100h is bricked now. i flash using odin and everthing was ok and it was pass. but nothing happend later on, screen remains black and I don't know what to do.
or atleast tell me can I get somehow all data stored on phone, if yes how to do it
guys still nothing???
same problem guys i bricked the phone 2 days ago with the original firmware from sam mobile u.u i put my samusung j1 in download mode and with odin i done the reflash odin it was green and said me passed but then when i tried to turn on the phone nothing happened my phone is died hard bricked is there a guys something to do to repair him?
i got the same problem..
the phone was completely DEAD after i followed all the instructions here => https://www.youtube.com/watch?v=1T9fxno2s68
Please somebody help us..
Here's my thread => http://forum.xda-developers.com/android/help/help-sm-j100h-dead-power-flash-t3511894
Thank you very much..
im using sm j110h and i too flashed orginal stock rom via odin but unfortunately i forget to put the batteries on and i fonud that after that i got pass message only now the screen remaines black and not getting to download mode and not switching on. does anyone help me on this problem hope will get a solution thanks in advance
Gal J1 of sadness.... but still hoping
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Chrisjopett said:
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Click to expand...
Click to collapse
PM me pls and tell me how you flashed it etc.
Help
I have same problem,hard brick.Can anyone help?
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
kkq29 said:
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
Click to expand...
Click to collapse
Can you get into Odin Mode? If yes, flash the stock firmware of your region (here is a fast server which provides very fast downloads: fw.updato.com) If no, then you should change your battery as you're saying "it came from my battery" and try the first step again.
If it doesn't help as expected, then your phone is hard bricked and can't be repaired at all. The only solution would be changing the motherboard, but I would not waste my money on a low-end device motherboard and I would directly buy a new phone. :/
Regards,
xEmre66
If I am correct...
Then SM-J110H have Spreadtrum SC7727S
Here is Pinout for Direct eMMC...
https://postimg.cc/image/ul680l5jv/
This Pinout seems also to work with:
Code:
SM-G318HZ
SM-Z130H
I have leaked SM-Z130H PDF... where Instruction is inside to repair with tweezer... USB cable + Spreadtrum Tool:
Code:
[B]ResearchDownload[/B]
In theory something similar should be possible with SM-J110H...
I have at the moment only 1 problem... to create PAC file...
No idea from where I can get:
Code:
FDL1
FDL2
Best Regards
Edit 1.
Sorry, seems I was drunken...
It is sooo hard to find Posts or Threads about SM-J110H...
But it seems SM-J100H also Spreadtrum device...
xEmre66 said:
PM me pls and tell me how you flashed it etc.
Click to expand...
Click to collapse
PM me too please
My teacher phone has a same problem, hehehe.
same problem here. my phone got stuck up with samsung logo then i just dowloaded a firmware on sammobile and i flash it via odin at first it passed then my phone did'nt turn on anymore.
J100H / DD Finding Deadboot solution
Hi ... guys me too having this sort of problem and i found bad about samsung using 32bit - Spreadtrum SC8830A EMMC chipset here
Fix solution Not Found still! if i done i will tell you!
on = SM-J100H/DD --- corp =samsung yateley, uk
ok friend iam searching for Solution for 3days bt i found none= with a clue
It is J100H on serial port= SPRD U2S Daig (ComXX) usb says= SPRD COM Emumerator
this means - all sprd flashing been done on this 2 port only - in Miracle Box it says -
Scanning USB Serial port...
SU2Serial Port: COM64
Connecting to Phone,Wait..
Done.
Infor: SPRD3
Initialize boot19...
>>BootLoad Error. ID: 1
so my option is if we build a sprdp.bin and flash in AP(PDA) it will boot to Download mode
and dont ask me where is that file i dont no - if any one can provide a real backup pit.pit file
via phone to me i can find something and let u know it. Only from a alive phone J100H/DD
plz friends i need help any dumps or pit. and if any one has a alive J100H/DD please tell me.!
so i can get some help from u --If you wish to help