Database Users

move from H2Os to Oxygen Os on Oneplus2

I am having op2 ,it was with oxygenOs ,I heard abt H2oS , so I uploaded it, but now again I want to switch to Oxygen, Help Needed with All links & Tutorials.

Here You Go
1. Download the latest signed flashable zip of Oxygen OS( currently OOS 3.1.0) from here.
2. If you want to install google apps too, download the needed gapps ( prefer mini, nano or micro) package for Arm64 Android 6.0 package from OpenGapps
3. Copy those zip files to your Internal storage.
4. Assuming you already have TWRP installed, boot into TWRP and Wipe everything except Internal Storage.
5. Install OOS ROM zip followed by the GApps zip and reboot.
You're on OOS

From Lineage OS to Oxygen OS

Hi. I have OnePlus 2. I installed Lineage OS ROM using TWRP. However, 2 weeks ago my finger print scanner stopped working and I am unable to update any apps from the play store. I cleared cache also from the TWRP recovery.
I am unable to install latest version of Lineage OS either. Getting 'Error 7' when trying to flash the latest version of Lineage OS.
Now I want to remove TWRP and install Oxygen OS. How can I do that?
Thanks in advance.

Wipe everything except your internal storage and flash the stock firmware (full rom).The rom will replace twrp with stock recovery upon booting . @abhaykhanna

Phone restarting after installing Certain apps

I recently flashed my ROM to Resurrection remix named RR-N-v5.8.5-20170925-a6000-Final and installed gapps named open_gapps-arm-6.0-stock-20171022 then I installed some apps from play store. SOme apps like Backdrops after installation makes my phone to restart and whet it boots up it shows "google has stopped responding " also "process system is not responding" and then is restarts again. I tried reflashing several times but nothing seems to work.

1. Wipe Art/cache system, data, internal
2. Install HEX Firmware
3. Install 5.8.5 RR
4. Install arm 7.1 pico gapps
5. wipe cache and reboot.
Rom take some time to Battery Collaboration and Performance.
so keep patience and enjoy.

rkunaal said:
1. Wipe Art/cache system, data, internal
2. Install HEX Firmware
3. Install 5.8.5 RR
4. Install arm 7.1 pico gapps
5. wipe cache and reboot.
Rom take some time to Battery Collaboration and Performance.
so keep patience and enjoy.
Click to expand...
Click to collapse
How can I install the firmware?

The link of hex firmware is in RR thread. And you flashed marshmallow gapps on a nougat rom. Flash arm 7.1 gapps.

ameyab97 said:
The link of hex firmware is in RR thread. And you flashed marshmallow gapps on a nougat rom. Flash arm 7.1 gapps.
Click to expand...
Click to collapse
Still the same problem

I think the problem is with new playstore every time I download certain apps it crashes.

raunak51299 said:
How can I install the firmware?
Click to expand...
Click to collapse
http://berbagikoleksi.blogspot.in/2015/06/solusi-lenovo-a6000-bootloop-gagal-flash.html?m=1
Sent from my Redmi Note 4 using Tapatalk

raunak51299 said:
I recently flashed my ROM to Resurrection remix named RR-N-v5.8.5-20170925-a6000-Final and installed gapps named open_gapps-arm-6.0-stock-20171022 then I installed some apps from play store. SOme apps like Backdrops after installation makes my phone to restart and whet it boots up it shows "google has stopped responding " also "process system is not responding" and then is restarts again. I tried reflashing several times but nothing seems to work.
Click to expand...
Click to collapse
First, I would like you to know that you DID NOT follow the instructions correctly. INSTRUCTIONS said, you will flash Opengapps 7.1.X ARM not 6.0 Marshmallow. Links were already given but still you did not follow.
Download the correct gapps package - ARM > 7.1 > Pico.
Code:
http://opengapps.org
Dirty flash it but if there's still an issue, you can clean install your RR 5.8.5 Final again and flash the gapps 7.1.
Good luck!

custom rom advice

Hi
Looking to install hardened rom or privacy rom so i can choose what apps to install will not be using google play and many other google apps, magisk is a good option and passing safetynet using microg would be a bonus, have been looking at installing wireguard for vpn
Have used lineage os on oneplus 3t with privacy guard. I know there are roms such /e and paranoid android
Any suggestion or advice currently on stock rom, phone is untouched at the moment ?
Also hear the oneplus 6 has 2 software slots, an A slot and a B slot and rom needs to be flashed to both slots ?
What you lot think of alternative youtube ?
https://www.digitbin.com/youtube-app-alternatives/

Omnirom is great for privacy
Newpipe is the best open source youtube alternative

Lineage is still the only ROM with Privacy Guard as far as I know. It's only in LOS 16 though, they are slowly pulling in features into LOS 17, but it's still missing many features of LOS 16.
Onmirom has many customization features, more than LOS, but it does not have Privacy Guard. The privacy features of LOS are the reason I always run Lineage, and only buy devices that can run Lineage.

Looks like lineage os 16 it is how did you flash both slot a/b ?

sajeel said:
Looks like lineage os 16 it is how did you flash both slot a/b ?
Click to expand...
Click to collapse
Here's how I install LOS, Note the the sentence at the top about replace 10.3.1 with 9.0.17 if you are doing LOS 16. Do NOT use Android 10 as your base if you are flashing LOS 16. Android 9 for Android 9 based ROMs, Android 10 for Android 10 based ROMs, any questions ask.

Just stick with OB 10 and use app ops
YouTube Vanced and your good to go

Installed lineage os 16.0 thanks for links and advice
here is my set of instructions using linux os as below:
Unlock bootloader:
1) Bakup data
2) Enable developers options
3) Enable oem unlocking
sudo adb devices
sudo adb reboot bootloader
sudo fastboot devices
sudo fastboot oem unlock
(Some mac and linux users may need enter ./ before command)
TWRP:
The OnePlus 6T uses the newer AB partition scheme first introduced on the Pixel 1. As such there is no recovery partition. Instead, the recovery is part of the boot image. You will temporarily boot TWRP to perform and later perform a more permanent TWRP installation. First download the TWRP zip file directly on your device. If you don't download the zip file to your device first for any reason, you will need to adb push the zip to the device because MTP is not currently working on the OnePlus 6T in TWRP. If you are unable to use adb, you can also use a USB stick with an OTG cable, if you have those handy. Power off the device. Hold volume up to get into fastboot mode. Run this command on your computer: sudo fastboot boot twrp-3.2.1-0-fajita.img
In TWRP, tap on Install and browse to the zip and install it (the zip will probably be in /sdcard/Downloads). TWRP will now be installed to both slots. TWRP is now installed and you can reboot and use your device as normal.
Downgrade /Upgrade:
If you're unlocked, flash it trough TWRP and format your storage.
Lineage OS Install:
sudo ab
This is how I install Lineage 17. (If you are doing 16, replace 10.3.0 with 9.0.17, and the Q image of TWRP with the Pie image)
- Install 10.3.0 fastboot ROM again to start over, boot it once. Just to make sure everything is good.
- Reboot to fastboot.
- Boot the Q image of TWRP.
- Run the TWRP installer, reboot to recovery
- You backed everything up right?
- Factory reset (This is the slider at the bottom in the wipe menu).
- Format data. (This is the button that says Format data in the wipe menu)
- Do NOT wipe cache, do not Wipe system, do NOT Wipe Dalvik / ART, do not add anything else, Just Factory Reset and Format Data. After doing those two Reboot to Recovery one more time. You must do this after formatting data.
- Now transfer Lineage and TWRP to your phone, Windows / Linux should see TWRP fine as a media device when plugged in.
- Install Lineage
- Run the TWRP Installer.
- Reboot to Recovery, switch slot
- Install Lineage (You need Lineage on both slots, so yes run it again)
- Run the TWRP Installer (yes again).
- Reboot to Recovery.
- Install Gapps if you want them.
- Install Magisk 20.3 if you use Magisk. I used 20.3 it works fine. Do not install modules or other add ons at this point. Boot once and go through the setup and everything, then install your add-ons.
- Be aware the phone will restart once, then Lineage will start up and all will be good.

sajeel said:
here is my set of instructions using linux os as below:
Click to expand...
Click to collapse
Those look familiar. Glad you got everything working.

[GUIDE] [J400X] How To Install GSI in Samsung Galaxy J4

• Introduction
Samsung Galaxy J4 is a phone based on Exynos 7570 with 720x1280 resolution, ARM Mali T720 GPU, Cortex A53 Quad-core CPU. This phone released in 2018 with Android 8 shipped out-of-box, and available OS update until Android 10.
But, since it already 2 years (in 2020) from launched, this phone only have developer that can be counted on one hand. There is no custom rom for this device, and custom kernel only 1 or 2 or 3 (I'm building this kernel right now, but I'll release it when I have enough post count )
The good news is, this device is Treble supported! So we can install most of available GSI, even without any vendor or kernel required.
• Stock ROM vs GSI
What's the different? In my opinion, very much! As we know, GSI is based on AOSP, which is pure android, and almost no bloatware. And, for other GSI, like Havoc or Lineage or any GSI like that, have cool theme and animation. Why not giving a try?
• Warning
Although this is cool, but, remember this is GSI, bugs are widely open. Bugs I found are in below.
Second thing, your warranty is void! This is sure, you unlock bootloader, Install TWRP, even install GSI, that surely will trip knox and voiding warranty.
And, last one, backup ALL of your data. This process will wipe your data partition.
• Bugs
As far as I use Havoc-OS GSI 3.7 Android 10, I feel these bugs:
1. Camera Streching, use Open Camera
2. Video recording, use Open Camera too
3. Camera in Whats'App
4. I forgot
If you feel other bugs, please write it in below.
• Steps
Since currently this phone have Android 9 Android 10 update, the steps will be different. Dont worry, I'll write all the steps
From Android 9 stock :
1. Download TWRP 3.2 and 3.4
2. Copy to your PC
3. You must have Odin
4. Download GSI image A64 A-ONLY / ARM32_BINDER64 and put it in your Micro SD card or USB (for OTG)
5. Download Gapps (optional if you want google apps installed) nano / pico ARM-10.0
6. Download Magisk if you want root
7. Dont forget to copy downloaded zip file to Micro SD Card or USB (For OTG)
8. Flash TWRP 3.2 via odin, then reboot recovery
9. Wipe - format data - yes
10. Wipe - advanced wipe - choose system, data, internal, cache / dalvik cache
11. Install - install image - choose gsi image you downloaded - choose system image
12. reboot recovery
13. mount - system
14. wipe - advanced wipe - choose system - repair filesystem - resize
15. install - install gapps zip
16. reboot download
17. flash TWRP 3.4
18. reboot recovery
19. flash magisk (optional)
20. flash zygotefix
21. reboot and complete setup
From Android 10 stock :
1. Download TWRP 3.2 or OrangeFox
2. Download any a64 A/B (arm32_binder 64) xz decompress it* and put it in your Micro SD card or USB (for OTG) or internal memory
3. extract it with any extractor app
5. Download Gapps (optional if you want google apps installed, some have it included)
6. Reboot recovery
7. wipe. advance wipe. system, data, dalvick cache.
8. Flash the extracted GSI
9. Flash Gapps if they are not included
10. Flash magisk (optional)
11. Reboot system
And Done!
If you have anything you ask, feel free to join our Telegram group : t.me/SamsungGalaxyJ4
Or PM me in Telegram : t.me/hendramanudinata
Cheers!