Step by Step Guide - Galaxy S 4 Q&A, Help & Troubleshooting

What are the steps for flashing nougat 7.1.2 on Galaxy S4 SGH-M919 THROUGH TWRP? This is the steps i did when i flash nougat 7.1.2 [First i root with kingroot {kingroot reboot the phone}then i used Odin3_v3.12.7 and flash twrp-3.1.0-0-jfltexx.img.tar reset time and took battery out after the pass sign was up. Already put these zip files in my sdcard {OpenGapps & ThemeReady Gapps and nougat 7.1.2 then went into recovery mode and did a nandroid backup of my stock system {before this process) then rebooted then into recovery mode into TWRP AND PRESS WIPE WHICH GAVE ME WIPE DATA CACHE AND Dalvik cache Then i flash all three zip file starting with the rom > OpenGapps>ThemeReady Gapps, reboot the phone and everything was good but my google play service has stop kept coming up and i had problem connecting to google play store said i have to connect to login to my account. Also a shout out for:good: KINGROOT APP:good: ONE MORE THING WHY WHEN I GO ON GOOGLE PLAY STORE SOME OF MY APPS ARE NOT COMPATABLE WITH MY PHONE WHEN IT WAS BEFORE] THANK YOU:good: did i miss a step that might have cause google play service keep poping up??????

Maybe the error is caused by Theme Ready Gapps.

Pwnycorn said:
Maybe the error is caused by Theme Ready Gapps.
Click to expand...
Click to collapse
Is there some steps or page where i can go like this one https://forum.xda-developers.com/galaxy-s4/i9505-orig-develop/jdcteam-android-source-project-mra58v-t3251663 to do a clean install:good:

lavont77 said:
Is there some steps or page where i can go like this one https://forum.xda-developers.com/galaxy-s4/i9505-orig-develop/jdcteam-android-source-project-mra58v-t3251663 to do a clean install:good:
Click to expand...
Click to collapse
To clean install you have to: Wipe everything and flash the ROM. Without the Theme Ready Gapps this time.

Pwnycorn said:
To clean install you have to: Wipe everything and flash the ROM. Without the Theme Ready Gapps this time.
Click to expand...
Click to collapse
Thanks for the help. i went earlyer today and found this page and followed the instrution and that fix it and the phone runs even better. Here is the link https://forum.xda-developers.com/galaxy-s4/i9505-orig-develop/jdcteam-android-source-project-nrd90m-t3453084
:good::good:Thank You XDA and the JDCTeam FOR THE INFO:good::good:

The forum for the m919 is here: https://forum.xda-developers.com/galaxy-s4-tmobile
It is not necessary to root before flashing TWRP and a custom ROM.

Related

OmniRom build2 - FC on boot NFC and phone service

Just flashed OmniRom beta 2 build together with gapps linked in the OmniRom thread and I get fc on first boot on both NFC service and one more android service something something - can't get passed the pop ups and a reboot into recovery is all I can do.
Wiped system using TWRP 2.6.3.2 and cleared cache after install - did another wipe after reboot just to be sure. I have seen this on other roms that I try to flash?
am I doing something wrong during the flash process?
Wipe (default twrp)
install rom and gapps
clear cache/dalvik
reboot
Tried different gapps with no success..
I tried to flash the first OmniRom (build 1) with the same problems and I also got CM start tutorial when I had flashed OmniRom?? So it feels like the wipe is not working as it should?
TheErk said:
Just flashed OmniRom beta 2 build together with gapps linked in the OmniRom thread and I get fc on first boot on both NFC service and one more android service something something - can't get passed the pop ups and a reboot into recovery is all I can do.
Wiped system using TWRP 2.6.3.2 and cleared cache after install - did another wipe after reboot just to be sure. I have seen this on other roms that I try to flash?
am I doing something wrong during the flash process?
Wipe (default twrp)
install rom and gapps
clear cache/dalvik
reboot
Tried different gapps with no success..
I tried to flash the first OmniRom (build 1) with the same problems and I also got CM start tutorial when I had flashed OmniRom?? So it feels like the wipe is not working as it should?
Click to expand...
Click to collapse
Where did you get the build? If you got a CM start tutorial then you definitely didn't wipe, and i wonder what exactly you're flashing? This would be anything official Omni
jerdog said:
Where did you get the build? If you got a CM start tutorial then you definitely didn't wipe, and i wonder what exactly you're flashing? This would be anything official Omni
Click to expand...
Click to collapse
Got the Omni from
http://forum.xda-developers.com/showthread.php?t=2517309
and the twrp from
http://forum.xda-developers.com/showthread.php?t=2469995
Others have succeeded using this so no clue what I'm doing wrong? I have flashed other roms, recovery works. Sometimes it seems like it is not wiping it all?
TheErk said:
Got the Omni from
http://forum.xda-developers.com/showthread.php?t=2517309
and the twrp from
http://forum.xda-developers.com/showthread.php?t=2469995
Others have succeeded using this so no clue what I'm doing wrong? I have flashed other roms, recovery works. Sometimes it seems like it is not wiping it all?
Click to expand...
Click to collapse
As this is far from an official build, you will want to direct your issues to the porter/builder of the ROM in that thread you linked.
jerdog said:
As this is far from an official build, you will want to direct your issues to the porter/builder of the ROM in that thread you linked.
Click to expand...
Click to collapse
That would be awesome, thanks
jerdog said:
As this is far from an official build, you will want to direct your issues to the porter/builder of the ROM in that thread you linked.
Click to expand...
Click to collapse
Think I found the problem - a "default" wipe in twrp won't do it - I had to go in to advanced and choose "cache,dalvik,data and system" now it works like a charm! Good to know for the future..

[Q] [CM12] GApps Crash On Startup

Hello,
I upgraded my Verizon Galaxy S4 from CM11 to CM12 last night, using the nightly build from 1/7/2015. The upgrade went smoothly, except for gapps. I have not been able to get them to successfully run on Lollipop. I have tried the following builds of gapps:
PA GAPPS
2014-11-09
2014-12-20
I use the following installation process each time:
Boot into CWM 6.0.3.2
wipe data/factory reset
wipe cache partition
mounts and storage > format /system
wipe dalvik cache
install CM.zip
install gapps.zip
When I reboot the phone, it gets into the lock screen as expected, but when I swipe it to unlock, I instantly get a stream of errors ("Setup wizard has stopped", "Google+ has stopped", etc). The exact errors depend on which gapps version I install, since they come with (slightly) different apps in the packages.
Has anyone had success with the Lollipop gapps packages and CyanogenMod?
rowdypixel said:
Hello,
I upgraded my Verizon Galaxy S4 from CM11 to CM12 last night, using the nightly build from 1/7/2015. The upgrade went smoothly, except for gapps. I have not been able to get them to successfully run on Lollipop. I have tried the following builds of gapps:
PA GAPPS
2014-11-09
2014-12-20
I use the following installation process each time:
Boot into CWM 6.0.3.2
wipe data/factory reset
wipe cache partition
mounts and storage > format /system
wipe dalvik cache
install CM.zip
install gapps.zip
When I reboot the phone, it gets into the lock screen as expected, but when I swipe it to unlock, I instantly get a stream of errors ("Setup wizard has stopped", "Google+ has stopped", etc). The exact errors depend on which gapps version I install, since they come with (slightly) different apps in the packages.
Has anyone had success with the Lollipop gapps packages and CyanogenMod?
Click to expand...
Click to collapse
https://s.basketbuild.com/gapps
try that gapps which works for me very fine.
Factory reset
install Cm and then gapps. it should work all fine actually. :laugh: goodluck. reply here for further problems.
xDroidZz said:
try that gapps which works for me very fine.
Factory reset
install Cm and then gapps. it should work all fine actually. :laugh: goodluck. reply here for further problems.
Click to expand...
Click to collapse
I tried that one again - no dice. com.google.process.gapps crashes on startup, followed by a long list of other Google apps included in the package.
Same problem.
---------- Post added at 03:12 PM ---------- Previous post was at 03:01 PM ----------
Nexus 7 2013 WiFi
Any fix for this? I've been struggling with it for a whole day now.
I have not found a fix. I reverted back to KitKat since I needed to use my phone during the week.
Bump
I finally managed to fix the problem. All the clean flashes did nothing, and I made sure they were squeaky clean, so I decided to start from scratch. I ODIN'd back to stock, installed TWRP instead of Clockworkmod, and reinstalled the rom and gapps package. I booted into the setup wizard and all is right in the world. Thanks for all who helped me!
Do you know what version of CWM you were running? I might try updating it over the weekend and see if that works as an alternate solution.
Try this. This worked for me.
http://fitsnugly.euroskank.com/?rom=banks&device=gapps
Gapps crashes
rowdypixel said:
I tried that one again - no dice. com.google.process.gapps crashes on startup, followed by a long list of other Google apps included in the package.
Click to expand...
Click to collapse
Before adding gapps after flashing cm-12 wipe dalvik and cache, flash ktoonz lollipop kernel then flash gapps for lollipop. This worked for me.
anonymousguy44 said:
I finally managed to fix the problem. All the clean flashes did nothing, and I made sure they were squeaky clean, so I decided to start from scratch. I ODIN'd back to stock, installed TWRP instead of Clockworkmod, and reinstalled the rom and gapps package. I booted into the setup wizard and all is right in the world. Thanks for all who helped me!
Click to expand...
Click to collapse
Hey I'm having the same problem, can you describe how in Odin you got back to stock? You flashed stock and lost your custom recovery? That's weird, I figured a custom recovery was like a bios

Cant install LineageOS 14.1 on G2 D802 (TWRP deletes root)

Heyy,
as i had some problems with my g2 i had to flash stock rom kitkat 4.4.2.
I rooted with ioroot, downloaded lineage and gapps files, flashed custom recovery with autorec but if i then go to twrp and install lineage os and gapps, i always get "your device does not appear to have root. do u want to install supersu?", althoug ive checked root with "root checker" before... i cant find the mistake
I WANT LINEAGE OS
Quicka said:
Heyy,
as i had some problems with my g2 i had to flash stock rom kitkat 4.4.2.
I rooted with ioroot, downloaded lineage and gapps files, flashed custom recovery with autorec but if i then go to twrp and install lineage os and gapps, i always get "your device does not appear to have root. do u want to install supersu?", althoug ive checked root with "root checker" before... i cant find the mistake
I WANT LINEAGE OS
Click to expand...
Click to collapse
Autorec is just the first step to twrp. Go to https://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705 and get the bumped version 3.1.0-1.
Then put it in your phones memory, boot into twrp you got from autorec and flash the new version.
Jan Philipp said:
Autorec is just the first step to twrp. Go to https://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705 and get the bumped version 3.1.0-1.
Then put it in your phones memory, boot into twrp you got from autorec and flash the new version.
Click to expand...
Click to collapse
i have done it... but after i wiped data,... etc. flashed lineage os and gapps and reboot system, phone screen gets black... and i can only go to download mode to flash again stock rom ive tried it about 5 times
Problem fixed
problem fixed: flashed lollipop firmware, then rooted with LGoneClickRoot and installed TWRP with autorec
Quicka said:
problem fixed: flashed lollipop firmware, then rooted with LGoneClickRoot and installed TWRP with autorec
Click to expand...
Click to collapse
How did you flashed your phone? Your display have been black and you haven't seen anything. How did you entered into download mode?
djsasha78 said:
How did you flashed your phone? Your display have been black and you haven't seen anything. How did you entered into download mode?
Click to expand...
Click to collapse
just held the volume up button and then connected with pc. then using lg flash tool to flash lollipop stock rom
1. Root + TWRP : https://www.dropbox.com/s/2shvozzbu29xjfu/LGG2-D802-OneClickRootRecoveryV1.1.zip?dl=0
2. Update TWRP to 3.1 by flashing zip file and then rebooting recovery: http://www.gregtwallace.com/lgg2-projects/twrp/?version=3.1.0-1
3. LineageOS by flashing rom zip file and gapps: https://download.lineageos.org/d802 + http://opengapps.org/ (ARM + Android 7.1)
easiest method to flash lineageOS on LG G2 https://www.youtube.com/watch?v=BoPjGM0nrak (Video tutorial)
Hi,
It seems I have the same issue :
I tried to install LineAge, using TWRP 3.2.1 (from CM12.1), but nothing is working (I tried 20180425 and 20180404 nightly versions). After reboot I can see the backlight on the lcd screen but nothing else. Then I tested the installation of a CM12 version, all is right, normal boot. No error message written in the console. i tried also a CM13 install, same as Lineage.
Do you think I have to flask back to LG "OS" ?
JackSparreau said:
Hi,
It seems I have the same issue :
I tried to install LineAge, using TWRP 3.2.1 (from CM12.1), but nothing is working (I tried 20180425 and 20180404 nightly versions). After reboot I can see the backlight on the lcd screen but nothing else. Then I tested the installation of a CM12 version, all is right, normal boot. No error message written in the console. i tried also a CM13 install, same as Lineage.
Do you think I have to flask back to LG "OS" ?
Click to expand...
Click to collapse
Are you clean flashing? Make sure to factory reset, wipe system, data and cache before flash. Never wipe internal storage. Swipe factory reset again after flash. Try flashing gapps later after confirming that Rom boots fine.
cropsroth said:
Are you clean flashing? Make sure to factory reset, wipe system, data and cache before flash. Never wipe internal storage. Swipe factory reset again after flash. Try flashing gapps later after confirming that Rom boots fine.
Click to expand...
Click to collapse
Hi,
yes I wiped Dalvik, system, data & cache through TWRP, before flash. But I don't wipe after, I rebooted without GApps...
Maybe, because I read that somewhere, I need to flash a bootstack. I don't know when I have to di it, if I have to do.
Thanks
JackSparreau said:
Hi,
yes I wiped Dalvik, system, data & cache through TWRP, before flash. But I don't wipe after, I rebooted without GApps...
Maybe, because I read that somewhere, I need to flash a bootstack. I don't know when I have to di it, if I have to do.
Thanks
Click to expand...
Click to collapse
Yes, you don't wipe after flash, but you swipe the factory reset, it does not wipe but resets the flashed Rom. Give it a clean shot again. Check MD5 of the all files you downloaded with original MD5 to confirm the file didn't get corrupt.
Boot stack flash not needed. Please read the first post thoroughly in lineage thread
"""
Requirements:
Custom recovery (TWRP or any other)
KitKat (KK) bootloader (included in the lg-devs LP bootstack)
KitKat (KK) bootstack minimum; Please read the entire FAQ for important bootstack information. Installation of bootstacks is NOT recommended.
Clean flash if coming from another ROM or CM 13 (no dirty flash, wipe system too check you bootstack(needen bump support)
"""
crophs said:
... but you swipe the factory reset, it does not wipe but resets the flashed Rom. Give it a clean shot again. ...
Click to expand...
Click to collapse
Hi,
what do you mean by "you swipe the factory reset", I'm not sure what it is, either "give it a clean shot again".
Sorry I'm not very aware of all those processes ^_^, and I'm french so not very aware of some vocabulary words
Thank you

Paranoid Android is BACK!

Hello dear XDA community, if you haven't seen already, PA aka Paranoid Android is back!
More information: https://www.xda-developers.com/para...-2-builds-pie-controls-color-engine-and-more/
You can download it here: http://get.aospa.co/official/sailfish
Hope yall enjoy the PA godess! If you have tried it out, you may tell us how it went for you and how things are going.
Kind regards and happy flashing :highfive:
What would the proper sequence of steps be to flash this? I'm currently running Pixeldusts latest with April BL and TWRP rc1
Edit: nevermind I am an idiot
I may be wrong but I thought we weren't able to flash gapps on the pixel? Also, what build is this based on?
Error!
Just tried flashing. On April bootloader. Got an error message:
"Could not find the 'META/INF/com/google/android/update-binary' in the zip file"
Oh, well.
Oops - error was because I was trying to install from TWRP that was using fastboot! Once I flashed TWRP, installation was perfect!
pavanmaverick said:
Just tried flashing. On April bootloader. Got an error message:
"Could not find the 'META/INF/com/google/android/update-binary' in the zip file"
Oh, well.
Click to expand...
Click to collapse
I got it to boot but the beans GApps I had wouldn't let me back up from the cloud upon setup and a few other things are kinda buggy so I went back to PN
deleted to wrong method
inyourname said:
1. go to fastboot mode and boot twrp rc1
2. flash data, system, cache
3. install rom
4. reboot to system
5. turn off your phone, go to fastboot mode and boot twrp rc1 again
6. flash twrp rc2 -> bootsigner
7. reboot to twrp
8. install beansgapps
9. reboot to system
follow this instruction and it will works perfect!
Click to expand...
Click to collapse
Were you able to restore apps via Google backup?
crossen0 said:
Were you able to restore apps via Google backup?
Click to expand...
Click to collapse
i tried after writing the instruction but nothing works either. even i cannot even boot to the lockscreen properly. my bad
follow this method and it works but not working google backup setup, so you should install apps and backup settings manually
1. go to fastboot mode and boot twrp rc1
2. flash data, system, cache
3. install rom
4. reboot to system and unlock the lockscreen (it means swipe the lockscreen)
5. turn off your phone, go to fastboot mode and boot twrp rc1 again
6. flash twrp rc2 -> bootsigner
7. reboot to twrp
8. install beansgapps
9. reboot to system
i hope it helps
It says 0 downloads on the site linked above. Weird or am I just "paranoid"??
ragzz03 said:
It says 0 downloads on the site linked above. Weird or am I just "paranoid"??
Click to expand...
Click to collapse
On their google+ official forum they said they're having issues with their own serves, there is an official mirror if you check
Working so far....
I'm on the April Bootloader, and this ROM is working like a charm so far. My steps:
1. Install TWRP, boot into Recovery
2. Wipe
3. Install PA ROM
4. Reboot into System, and then boot into Fastboot
5. Reinstall TWRP, boot into Recovery
6. Install Open GApps (Nano package)
7. Reboot into System
8. Boot into TWRP
9. Install SuperSU
10. Reboot into System
11. Used Titanium Backup to reinstall apps and data
With this method, everything seems to work. I guess if you are on May bootloader you will need to reflash the boot signer after each step involving flashing sometime from TWRP?
pavanmaverick said:
I'm on the April Bootloader, and this ROM is working like a charm so far. My steps:
1. Install TWRP, boot into Recovery
2. Wipe
3. Install PA ROM
4. Reboot into System, and then boot into Fastboot
5. Reinstall TWRP, boot into Recovery
6. Install Open GApps (Nano package)
7. Reboot into System
8. Boot into TWRP
9. Install SuperSU
10. Reboot into System
11. Used Titanium Backup to reinstall apps and data
With this method, everything seems to work. I guess if you are on May bootloader you will need to reflash the boot signer after each step involving flashing sometime from TWRP?
Click to expand...
Click to collapse
Does this have all the navbar and status bar mods?
And does setup wizard cloud backup work with the nano GApps? I tried full and it would only allow phone to phone back up.
S8ntsHaz3 said:
And does setup wizard cloud backup work with the nano GApps? I tried full and it would only allow phone to phone back up.
Click to expand...
Click to collapse
Don't know - I use Titanium, and not the cloud backup. Sorry.
---------- Post added at 10:42 AM ---------- Previous post was at 10:41 AM ----------
drocny87 said:
Does this have all the navbar and status bar mods?
Click to expand...
Click to collapse
Not sure which mods you're referring to. It has immersive mode, and Pie controls.
All good thanks
S8ntsHaz3 said:
And does setup wizard cloud backup work with the nano GApps? I tried full and it would only allow phone to phone back up.
Click to expand...
Click to collapse
if you boot the phone after follows that instruction and flash nano gapps,
Hello screen - wifi setting - connect pixel<->other phone(mine was nexus5) - then the screen said you must use other way to restore back up - select cloud backup - email and password - restore backup
In that case you can restore your apps and backup settings from cloud backup cause i tried and works perfect.
i tried everything to restore cloud backup without connecting other phone but cannot found any ideas.

ZE552kL (Soft Bricked)

I have bricked my phone the issue I am facing is I don't own and can't afford an SD card to sideload the rom onto my phone is there a 7.0 stock based rom that is flashable via TWRP or? Really need some ideas need to fix this device.
If you have access to TWRP, then plug your phone into your computer and it'll mount your internal sdcard. Copy any Rom you want onto it and flash as normal (remember to wipe cache and dalvik!). If you get the "error 7" output, edit your updater script and do it again. If you get a bootloop after successfully flashing, flash the latest magisk zip (I assume you use root?) or noverity file if not.
wang1chung said:
If you have access to TWRP, then plug your phone into your computer and it'll mount your internal sdcard. Copy any Rom you want onto it and flash as normal (remember to wipe cache and dalvik!). If you get the "error 7" output, edit your updater script and do it again. If you get a bootloop after successfully flashing, flash the latest magisk zip (I assume you use root?) or noverity file if not.
Click to expand...
Click to collapse
I use root and both but when I decided to remove root and was looking at installing another rom it failed now I don't see any twrp flashable roms for my device would you know of any? I tried stock but it can't be flashed from TWRP sadly I have no bootable rom at the moment.
@mastermarkofroms
EVERY Rom that can be flashed through stock recovery can be flashed through TWRP.
....all you need to do is edit the updater script as I said above. Give it a shot
Edit: you softbricked your phone removing root? Just perform a factory reset, you'll lose your personal data but it'll boot. Remember to wipe cache and dalvik.
wang1chung said:
@mastermarkofroms
EVERY Rom that can be flashed through stock recovery can be flashed through TWRP.
....all you need to do is edit the updater script as I said above. Give it a shot
Edit: you softbricked your phone removing root? Just perform a factory reset, you'll lose your personal data but it'll boot. Remember to wipe cache and dalvik.
Click to expand...
Click to collapse
I have never modified that before what would I need to modify to get it working?
@mastermarkofroms
Open the Rom archive and edit the updater script (/META-INF/com/google/android/updater-script) to remove the first 7 lines (sometimes more or less) of code, so the script starts at "ui_print....." now. Save it, and load it onto your sdcard and flash.
wang1chung said:
@mastermarkofroms
Open the Rom archive and edit the updater script (/META-INF/com/google/android/updater-script) to remove the first 7 lines (sometimes more or less) of code, so the script starts at "ui_print....." now. Save it, and load it onto your sdcard and flash.
Click to expand...
Click to collapse
I will give that a shot turns out a factory reset did not start up device so this is my last choice as I can still access recovery
edit: so after modifying the script it did flash without an issue but it still has failed to boot reloading the bootloader.
Flash magisk or the no verify file
wang1chung said:
Flash magisk or the no verify file
Click to expand...
Click to collapse
the no verify file was flashed when I rooted this device
Which Rom did you flash?
You performed a factory reset and wiped dalvik and cache after flashing? How long did you wait after rebooting? Usually takes 5-10min on the first boot.
Edit: you flashed the no verity file after flashing the rom today, right?
wang1chung said:
Which Rom did you flash?
You performed a factory reset and wiped dalvik and cache after flashing? How long did you wait after rebooting? Usually takes 5-10min on the first boot.
Edit: you flashed the no verity file after flashing the rom today, right?
Click to expand...
Click to collapse
I tried flashing Unofficial LineageOS 14.1 for ZE552KL by basenode with opengapps it just failed to flash not an error 7 it actually gave me a wrong device error although I know I have the ze552kL model. and since then it don' boot it tries to you see the asus logo and it just restarts again in a boot loop
Flash magisk right now, then wipe cache and dalvik
Go back asus nougat 7.0 -> factory reset -> flash LOS 14.1 -> flash gapps -> done. Flash magisk if you want.
Edit: when you go back asus rom and face bootloop then just flash no-verity file, everything will work like normal .
[email protected]@ said:
Go back asus nougat 7.0 -> factory reset -> flash LOS 14.1 -> flash gapps -> done. Flash magisk if you want.
Edit: when you go back asus rom and face bootloop then just flash no-verity file, everything will work like normal .
Click to expand...
Click to collapse
Thanks for the info will give that a shot as soon as I do get home from work. Just ablittle annoyed that first phone I have ever bricked
[email protected]@ said:
Go back asus nougat 7.0 -> factory reset -> flash LOS 14.1 -> flash gapps -> done. Flash magisk if you want.
Edit: when you go back asus rom and face bootloop then just flash no-verity file, everything will work like normal .
Click to expand...
Click to collapse
Any ideas where I can find the no verity file? I dont see it on the forum unless I am blind
mastermarkofroms said:
Any ideas where I can find the no verity file? I dont see it on the forum unless I am blind
Click to expand...
Click to collapse
Here https://forum.xda-developers.com/ze...20kl-ota-upgrade-doesnt-t3706856/post74571792
[email protected]@ said:
Here https://forum.xda-developers.com/ze...20kl-ota-upgrade-doesnt-t3706856/post74571792
Click to expand...
Click to collapse
Problem solved back on stock thanks for all the help @everyone
mastermarkofroms said:
Problem solved back on stock thanks for all the help @everyone
Click to expand...
Click to collapse
I thought you ask for the LOS rom.
I did the thing is had it installed and everything but my phone kept freezing and lagging with it not sure why as I had nothing on there that would of caused it. But the lag once I got it working was just unbearable for me
mastermarkofroms said:
I did the thing is had it installed and everything but my phone kept freezing and lagging with it not sure why as I had nothing on there that would of caused it. But the lag once I got it working was just unbearable for me
Click to expand...
Click to collapse
Which rom?

Categories

Resources