Related
Hey guys!
I've installed the Nougat beta for my P9 Lite VNS-L21 Dual Sim, but now I want to downgrade to MM. This is what I did:
0. Installed Nougat via Melticulus TWRP
1. Installed Revolution Recovery (because Melticulus TWRP had stopped working, idk why)
2. Flashed OEMInfo
3. Copied Version B150/B151 (I've tried both) to the SDCard
4. Started the P9 Lite with Power + Volume UP + Volume DOWN and tried to flash one of the versions.
I'm stuck here, the Huawei Recovery says the following: "Software install failed! Incompatibility with current version. Please download the correct update package!"
I've used HTC Mania, Thread NR 1200630 to download the stock rom for my P9 Lite, I've tried both the VNS-L21C432B151 Android 6.0 EMUI 4.1.1 Europa and the VNS-L21C432B150 Android 6.0 EMUI 4.1.1 Europa
4240Benny said:
Hey guys!
I've installed the MM beta for my P9 Lite VNS-L21 Dual Sim, but now I want to downgrade to MM. This is what I did:
0. Installed MM via Melticulus TWRP
1. Installed Revolution Recovery because Melticulus TWRP had stopped working (idk why)
2. Flashed OEMInfo
3. Copied B150/B151 (I've tried both) to the SDCard
4. Started the P9 Lite with Power + Volume UP + Volume DOWN
I'm stuck here, the Huawei Recovery says the following: "Software install failed! Incompatibility with current version. Please download the correct update package!"
I've used HTC Mania, Thread NR 1200630 to download the stock rom for my P9 Lite, I've tried both the VNS-L21C432B151 Android 6.0 EMUI 4.1.1 Europa and the VNS-L21C432B150 Android 6.0 EMUI 4.1.1 Europa
Click to expand...
Click to collapse
You installed MM BETA on MM and now wanna downgrade to MM ..? You know what means MM? On which mm you ware before?
sorry. I've corrected my question, looks like I was a bit brain afk... Whatever, thank you for your help!
(Yes, i know what MM means (Marshmallow), N menas Nougat)
4240Benny said:
sorry. I've corrected my question, looks like I was a bit brain afk... Whatever, thank you for your help!
(Yes, i know what MM means (Marshmallow), N menas Nougat)
Click to expand...
Click to collapse
SALUT have you, before flashing oeminfo, allowed Storage parameters, default location SD card.
Chisetdel31260 said:
SALUT have you, before flashing oeminfo, allowed Storage parameters, default location SD card.
Click to expand...
Click to collapse
I've changed the default location to SD Card in TWRP (Install Zip --> Select storage) because don't have access to my os any more, bot how do I allow Storage Parameters?
4240Benny said:
I've changed the default location to SD Card in TWRP (Install Zip --> Select storage) because don't have access to my os any more, bot how do I allow Storage Parameters?
Click to expand...
Click to collapse
Ok so if you have allowed it, well, flasher b130full it will have to go.
If not, twrpnougat nougat fash, just to start, authorized SD card storage location.
Returned to TWRPNougat flash oeminfo and restarted with dload.
http://www.htcmania.com/showthread.php?t=1265458
Chisetdel31260 said:
Ok so if you have allowed it, well, flasher b130full it will have to go.
If not, twrpnougat nougat fash, just to start, authorized SD card storage location.
Returned to TWRPNougat flash oeminfo and restarted with dload.
http://www.htcmania.com/showthread.php?t=1265458
Click to expand...
Click to collapse
Thank you, I'll try this
It doesn't work for me. The strange thing is I can't even flash system using fastboot, it gives me a FAILED (remote: sparse flash write failure) error...
can someone send me a NANDROID BACKUP of MM for VNS-L21?
PLS!!!!!!
Check bootloader,? The fastboot works, ?
TWRPNougat could install you a firmware nougat b3xx.zip + b3xxhw.zip and restart telephone.?
Which oeminfo used you ?
Chisetdel31260 said:
Check bootloader,? The fastboot works, ?
TWRPNougat could install you a firmware nougat b3xx.zip + b3xxhw.zip and restart telephone.?
Which oeminfo used you ?
Click to expand...
Click to collapse
Well, fastboot works, I'm able to flash recovery, recovery2 and boot but I'm not able to flash system. I can't install any os. I've used the C432OemInfo-DUALSIM-P9LITE.zip from @BadWolfYe.
???
what do you want now?
downgarde to mm or install Android N you can do both in this situation
Pls help me asap!!!!!!!
Just send me a nandroid backup of mm for vns-l21 dual sim please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
soory dude I have also installed android n on vns l21 dual sim and don`t have mm back up but I can tell you the process by whick you can also install mm or n on your device in this situation tooo
shann1231 said:
what do you want now?
downgarde to mm or install Android N you can do both in this situation
Click to expand...
Click to collapse
Well, no, I can't. Thats the problem. When I try to flash MM system.img it doesn't work (see post above) and when I try to do it with the dload method it tells me that the version is not compatible...
shann1231 said:
soory dude I have also installed android n on vns l21 dual sim and don`t have mm back up but I can tell you the process by whick you can also install mm or n on your device in this situation tooo
Click to expand...
Click to collapse
well...how?
and pls help me ASAP!!!!!
All you Have to do us download huawei update.app extracter and open mm update.app in it and extract boot.img,recover.img,system.img,userdata.img,oem.img and extract these files in adb tools folder then open maf32 and reboot your p9 lite in fastboot by going in revolutionary recovery>reboot>bootloader
then after your device is in boot loader enter the following commands
coomand will be In next message
shann1231 said:
All you Have to do us download huawei update.app extracter and open mm update.app in it and extract boot.img,recover.img,system.img,userdata.img,oem.img and extract these files in adb tools folder then open maf32 and reboot your p9 lite in fastboot by going in revolutionary recovery>reboot>bootloader
then after your device is in boot loader enter the following commands
coomand will be In next message
Click to expand...
Click to collapse
alright...
shann1231 said:
soory dude I have also installed android n on vns l21 dual sim and don`t have mm back up but I can tell you the process by whick you can also install mm or n on your device in this situation tooo
Click to expand...
Click to collapse
Could you explain it here? Maybe it solves my problem too
just tell me one thing why are you installing mm when you can install android n
Hi, since i'm not confident with adb/fastboot commands, i'm asking help for restoring the original firmware and recovery in my MLA-L11.
I've downloaded the two files from Firmware Finder (i'm sure 100% they are the right one) but i don't know how to proceed. Anyone can help there? Thank you
GertFromTheWell said:
Hi, since i'm not confident with adb/fastboot commands, i'm asking help for restoring the original firmware and recovery in my MLA-L11.
I've downloaded the two files from Firmware Finder (i'm sure 100% they are the right one) but i don't know how to proceed. Anyone can help there? Thank you
Click to expand...
Click to collapse
Hey!
You have to go back to EMUI 4.1 by restoring a TWRP backup and then you will update to EMUI 5. Ive used the following process on my CAN-L11 and worked fine. It should work on all models. @virusdunil has followed the same process on his MLA-L03 and everything went fine.
Let me know if you experience some trouble during this process.
Go back to EMUI 4.1 (MM)
1) Download this TWRP backup of MM: https://forum.xda-developers.com/showpost.php?p=73003510&postcount=60.
2) You can put the backup to internal memory or sdcard, After you've chose where you wanna put it, take a backup of boot.img with TWRP to internal/sdcard (where you wanna put the backup), so you'll get a folder with this structure: TWRP > BACKUPS > FPFDU16A20001907 (you'll have different number I guess). Then you'll put the twrp backup folder (which you have downloaded) in that folder with numbers
3) Boot in TWRP, wipe system, data, cache, dalvik cache from twrp > wipe > advanced and then you restore the backup from TWRP > restore (restore only system + data + boot). Then you reboot and you're good to go.
Click to expand...
Click to collapse
Now update to EMUI 5 (N)
After youve downloaded the stock firmware using Firmware Finder, you should have two files:
- update.zip
- update_data_full_CAN-L11_hw_eu.zip (example)
Backup your internal memory as it will be wiped at step 8).
1) Extract update.zip. Then you get UPDATE.APP.
2) Download Huawei Update Extractor.
3) Open Huawei Update Extractor, choose UPDATE.APP from the folder where youve extracted it. Right click RECOVERY.img and extract it.
4) Now boot your phone in fastboot mode by pressing and holding the power and the volume down buttons at the same time.
5) Type in terminal / command prompt on PC to flash the stock recovery which youve extracted at step 3):
Code:
fastboot flash recovery recovery.img
.
6) Reboot.
7) Put update.APP in a folder called dload on your sdcard.
8) Dial *#*#2846579#*#* and choose Sofware Upgrade > SDCard Upgrade. Now EMUI 5 will be installed, bootloader gets relocked and internal memory gets wiped. Now wait about 5 mins (maximum 10 mins). If the phone isnt booting within that time, then boot the phone in stock recovery by pressing and holding power and volume up buttons and choose "Wipe data / factory reset" and then "Wipe cache partition". After you reboot, the phone should boot. Skip the setup wizard.
9) Remove update.APP from dload folder from your sdcard and extract the other zip (example update_data_full_CAN-L11_hw_eu.zip) and put all the files/folders extracted in dload folder.
10) Dial *#*#2846579#*#* and choose Sofware Upgrade > SDCard Upgrade.
11) You are done.
Click to expand...
Click to collapse
To fix the themes app on EMUI 5, you can check this thread.
PS: im sorry for the missing apostrophe, but im not used to add that from PC keyboard. In fact, i dont even know how to add it, i think i need to change keyboard settings (language).
#Henkate said:
Hey!
You have to go back to EMUI 4.1 by restoring a TWRP backup and then you will update to EMUI 5. Ive used the following process on my CAN-L11 and worked fine. It should work on all models. @virusdunil has followed the same process on his MLA-L03 and everything went fine.
Let me know if you experience some trouble during this process.
Go back to EMUI 4.1 (MM)
Now update to EMUI 5 (N)
.
6) Reboot.
7) Put update.zip in a folder called dload on your sdcard.
8) Dial *#*#2846579#*#* and choose Sofware Upgrade > SDCard Upgrade. Now EMUI 5 will be installed, bootloader gets relocked and internal memory gets wiped. Now wait about 5 mins (maximum 10 mins). If the phone isnt booting within that time, then boot the phone in stock recovery by pressing and holding power and volume up buttons and choose "Wipe data / factory reset" and then "Wipe cache partition". After you reboot, the phone should boot. Skip the setup wizard.
9) Remove update.zip from dload folder from your sdcard and place the other zip there (example update_data_full_CAN-L11_hw_eu.zip.
10) Dial *#*#2846579#*#* and choose Sofware Upgrade > SDCard Upgrade.
11) You are done.
To fix the themes app on EMUI 5, you can check this thread.
PS: im sorry for the missing apostrophe, but im not used to add that from PC keyboard. In fact, i dont even know how to add it, i think i need to change keyboard settings (language).
Click to expand...
Click to collapse
Love you, i'll try ASAP.
#Henkate said:
Hey!
You have to go back to EMUI 4.1 by restoring a TWRP backup and then you will update to EMUI 5. Ive used the following process on my CAN-L11 and worked fine. It should work on all models. @virusdunil has followed the same process on his MLA-L03 and everything went fine.
Let me know if you experience some trouble during this process.
Go back to EMUI 4.1 (MM)
Now update to EMUI 5 (N)
To fix the themes app on EMUI 5, you can check this thread.
PS: im sorry for the missing apostrophe, but im not used to add that from PC keyboard. In fact, i dont even know how to add it, i think i need to change keyboard settings (language).
Click to expand...
Click to collapse
Hi robert, i succesfully downgraded to MM and restored (i guess) stock recovery. But when I try to upgrade to nougat via sdcard upgrade the phone can't find the update.zip file.
Maybe the problem is my phone believe he is a CAN instead of a MLA, and don't recognize a MLA update.zip file?
If that is the case, you need to use the firmware extractor and "fastboot flash system system.img" to get your build.prop back. That would get your device to recognize as what it is.
wangdaning said:
If that is the case, you need to use the firmware extractor and "fastboot flash system system.img" to get your build.prop back. That would get your device to recognize as what it is.
Click to expand...
Click to collapse
I found the issue, I had to unzip the update.zip tp UPDATE.app file in dload folder. The phone got bootloop at first flash, but wiping all solved the problem. Now i'm back to stock with proper build number, thanks @wangdang and @#Henkate for your support :victory:
GertFromTheWell said:
Hi robert, i succesfully downgraded to MM and restored (i guess) stock recovery. But when I try to upgrade to nougat via sdcard upgrade the phone can't find the update.zip file.
Maybe the problem is my phone believe he is a CAN instead of a MLA, and don't recognize a MLA update.zip file?
Click to expand...
Click to collapse
GertFromTheWell said:
I found the issue, I had to unzip the update.zip tp UPDATE.app file in dload folder. The phone got bootloop at first flash, but wiping all solved the problem. Now i'm back to stock with proper build number, thanks @wangdang and @#Henkate for your support :victory:
Click to expand...
Click to collapse
I'm sorry, it looks like I've wrote update.zip instead update.APP and also at step 9). It was my fault .
I've updated the steps 7 and 9. Thank you!
#Henkate said:
Hey!
You have to go back to EMUI 4.1 by restoring a TWRP backup and then you will update to EMUI 5. Ive used the following process on my CAN-L11 and worked fine. It should work on all models. @virusdunil has followed the same process on his MLA-L03 and everything went fine.
Let me know if you experience some trouble during this process.
Go back to EMUI 4.1 (MM)
Now update to EMUI 5 (N)
To fix the themes app on EMUI 5, you can check this thread.
PS: im sorry for the missing apostrophe, but im not used to add that from PC keyboard. In fact, i dont even know how to add it, i think i need to change keyboard settings (language).
Click to expand...
Click to collapse
Can you please give me the backup of cust.img and product? or cust.img file and product? because when i try to restore twrp backup or 4.1
Failed to mount /product (invalid argument).
Failed to mount /cust (invalid argument). Got this error
and my phone stuck on unlocked bootloader option.
1: click power button to continues
2 click vol Up for Erecovery
3: will be boot into 5 seconds etc and when i click power button phone reboot and again these options
abuapka said:
Can you please give me the backup of cust.img and product? or cust.img file and product? because when i try to restore twrp backup or 4.1
Failed to mount /product (invalid argument).
Failed to mount /cust (invalid argument). Got this error
and my phone stuck on unlocked bootloader option.
1: click power button to continues
2 click vol Up for Erecovery
3: will be boot into 5 seconds etc and when i click power button phone reboot and again these options
Click to expand...
Click to collapse
Cust: https://www.mediafire.com/file/oncwuuob84ubisy/cust_backup.zip
Product: http://www.mediafire.com/file/el054rk7a6tuya2/product_backup.zip
The backups are from N partitions.
#Henkate said:
Cust: https://www.mediafire.com/file/oncwuuob84ubisy/cust_backup.zip
Product: http://www.mediafire.com/file/el054rk7a6tuya2/product_backup.zip
The backups are from N partitions.
Click to expand...
Click to collapse
N partitions? Nougat ?
abuapka said:
N partitions? Nougat ?
Click to expand...
Click to collapse
Yes.
#Henkate said:
Yes.
Click to expand...
Click to collapse
THanks Bro.
Thanku so Much
Got My Phone back to stock 4.1 but its CAN
Before It was MLa-l11 By the way thanku so much
You sure you flashed stock MLA firmware?
no
wangdaning said:
You sure you flashed stock MLA firmware?
Click to expand...
Click to collapse
i didnt flash stock mla firmware i jus5 flashed 4.1 twrp backup
#Henkate said:
Hey!
You have to go back to EMUI 4.1 by restoring a TWRP backup and then you will update to EMUI 5. Ive used the following process on my CAN-L11 and worked fine. It should work on all models. @virusdunil has followed the same process on his MLA-L03 and everything went fine.
Let me know if you experience some trouble during this process.
Go back to EMUI 4.1 (MM)
Now update to EMUI 5 (N)
To fix the themes app on EMUI 5, you can check this thread.
PS: im sorry for the missing apostrophe, but im not used to add that from PC keyboard. In fact, i dont even know how to add it, i think i need to change keyboard settings (language).
Click to expand...
Click to collapse
hey how are you hope you fine
my mobile NOVA PLUS MLA11
i just bricked it and unbricked it by your method ( RESTORE TWRP BACKUP ) https://forum.xda-developers.com/nov...tboot-t3708585
now iam tring to get the correct firmware from huwaei finder but idont know wchich the correct one
because idont know my model (MLA-L11C"?????") idont know if it c185 or c432 !!
itried installlast one from c185 but it faild on 5%
thankss
Echtar said:
hey how are you hope you fine
my mobile NOVA PLUS MLA11
i just bricked it and unbricked it by your method ( RESTORE TWRP BACKUP ) https://forum.xda-developers.com/nov...tboot-t3708585
now iam tring to get the correct firmware from huwaei finder but idont know wchich the correct one
because idont know my model (MLA-L11C"?????") idont know if it c185 or c432 !!
itried installlast one from c185 but it faild on 5%
thankss
Click to expand...
Click to collapse
Hey!
I've got your PM, but I see that meanwhile you've posted here and you made a new thread too... You don't have to make so many posts, a post or a thread is enough to get the attention of someone.
In your case, the phone model is MLA-L11 and C185/C432 is the build number as far as I remember. You can check the build number in Settings > About phone. I don't know if there's any other way to check, if you're on other build number now and you don't know which one was yours.
#Henkate said:
Hey!
I've got your PM, but I see that meanwhile you've posted here and you made a new thread too... You don't have to make so many posts, a post or a thread is enough to get the attention of someone.
In your case, the phone model is MLA-L11 and C185/C432 is the build number as far as I remember. You can check the build number in Settings > About phone. I don't know if there's any other way to check if you're on other build number now and you don't know which one was yours.
Click to expand...
Click to collapse
iam on nrd90m test-keys
Echtar said:
iam on nrd90m test-keys
Click to expand...
Click to collapse
Post a screenshot of Settings > About phone as I don't really remember how it looks there.
Hi
I've managed to backup EMUI 4.1, however I'm getting error message "software install failed" trying to update EMUI to 5.0 (pops up, every time when it reach 5% progress).
Any idea how to fix it?
best regards
#Henkate said:
Now update to EMUI 5 (N)
Click to expand...
Click to collapse
Steps #9 and #10 do not work for me ("Software install failed"). But I wonder if they are necessary after all, because Product Id, IMEI, Build-number (and of course EMUI-Version and Android-Version) are stock again.
And isn't "update_full_CAN-L01_hw_eu.zip" supposed to be included in the "update.zip"-file? I thougt "update.zip" allready delivers every part of the ROM.
Hello, the problem is what i want restore my Huawei p9 Lite vns-l23c212 but i have installed the EliteRom and the TWRP Elite, so i dont have the partitions (cust, vendor..) and not have a backup of that.
So I downloaded the Find firmware and i downloaded my Huawei version, but i dont have a idea of how install the .zip, i tried using fastboot but when i want install the partitions (cust,vendor..) the console give me a error saying "vendor command failed" or some
I want help from us, sorry for the bad english, im waiting ur comments
Hello,
use rollback method.
First revert your DATA filesystem from
F2FS to EXT4 using TWRP, then follow guide
in UNIFIED HELP THREAD..
Here the link..
https://forum.xda-developers.com/huawei-p9lite/how-to/unified-help-thread-huawei-p9-lite-t3649152
Read carefully, you need L23C212 rollback...
Regards.
Hey
so i have to install the emiui4.1 and then update the huawei until reach to the emui5
Sertinium said:
so i have to install the emiui4.1 and then update the huawei until reach to the emui5
Click to expand...
Click to collapse
Yes, the rollback package will give you
c900 global firmware. From there install
B160 for dual sim, B161 for single sim..
When you will stay with this firmware,
update using updater stock or use Firmware Finder..
Follow the guide..
Regards..
Edit: sorry B160 and B161 are firmware persent in C432 Europe area-
Dont know the one for your cust/region (C212).
Let google do the work for you..
Dadditz said:
Edit: sorry B160 and B161 are firmware persent in C432 Europe area-
Dont know the one for your cust/region (C212).
Let google do the work for you..
Click to expand...
Click to collapse
Okay but the problem now is what in number of compilation say nrd90m test keys and i installed the firmware of my phone
Sertinium said:
Okay but the problem now is what in number of compilation say nrd90m test keys and i installed the firmware of my phone
Click to expand...
Click to collapse
Hello,
according with the guide you flashed
wrong package...
You need FULL OTA UPDATE package, it must be
1.7/1.9 gbytes in size wich cames with data..
Flash new one or repeat the whole process.
I found this firmware on internet,
but do not assume any responsability.
If you want give a try here the direct download..
Check it with an antivirus/antimalware software..
http://download-c.huawei.com/download/downloadCenter?downloadId=92443&version=361914&siteCode=mx
If all will go in the right direction at the end
reboot to e-recovery (vol+ + Power)
and make a factory reset.
Hope this time will work..
Best regards
Dadditz said:
Hello,
according with the guide you flashed
wrong package...
You need FULL OTA UPDATE package, it must be
1.7/1.9 gbytes in size wich cames with data..
Flash new one or repeat the whole process.
I found this firmware on internet,
but do not assume any responsability.
If you want give a try here the direct download..
Check it with an antivirus/antimalware software..
http://download-c.huawei.com/download/downloadCenter?downloadId=92443&version=361914&siteCode=mx
If all will go in the right direction at the end
reboot to e-recovery (vol+ + Power)
and make a factory reset.
Hope this time will work..
Best regards
Click to expand...
Click to collapse
Hello, I have already downloaded that file and I already flashed it but the compilation says that it is C900B130 .... instead of C212B130, so how do I change the cust to C212 ?, because with the other I can not receive the update of emui5, and if the effort with the Finder Firmware gives me the NRD90M test keys.
Sorry for the inconvenience
Sertinium said:
Hello, I have already downloaded that file and I already flashed it but the compilation says that it is C900B130 .... instead of C212B130, so how do I change the cust to C212 ?, because with the other I can not receive the update of emui5, and if the effort with the Finder Firmware gives me the NRD90M test keys.
Sorry for the inconvenience
Click to expand...
Click to collapse
Hello man,
really dont know if i badly explained..
My friend to bring back to MM
you have to strictly follow the guide i posted you..
So you need VNS-L23C212 rollback package then
extract update.app, create a "dload" folder in SD and
pur in it. Turn off and proceed with three buttons method*****
When finished you will have C900 firmware..
(that's a LIMBO firmware)
Delete update.app from SD card...(not dload folder)
Now take tour VNL-L23C212Bxxx firmware,
extract update.app, put in dload folder in SD card
and repeat with three buttons metod.
If all take right direction at end of flash, after booting,
reboot to e-recovery (vol up+ power button) and make a factory reset. Now you have MM firmware..
That's the guide say...
*****= vol up+vol down+power button until It start flashing
That's all my friend...
The other way is to flash L23C212 oeminfo.zip (if you find It)
with TWRP, then VNS-L23C212Bxxx with dload and three
button method. At the end factory reset..
Best regards
same problem,
Dadditz said:
Hello man,
really dont know if i badly explained..
My friend to bring back to MM
you have to strictly follow the guide i posted you..
So you need VNS-L23C212 rollback package then
extract update.app, create a "dload" folder in SD and
pur in it. Turn off and proceed with three buttons method*****
When finished you will have C900 firmware..
(that's a LIMBO firmware)
Delete update.app from SD card...(not dload folder)
Now take tour VNL-L23C212Bxxx firmware,
extract update.app, put in dload folder in SD card
and repeat with three buttons metod.
If all take right direction at end of flash, after booting,
reboot to e-recovery (vol up+ power button) and make a factory reset. Now you have MM firmware..
That's the guide say...
*****= vol up+vol down+power button until It start flashing
That's all my friend...
The other way is to flash L23C212 oeminfo.zip (if you find It)
with TWRP, then VNS-L23C212Bxxx with dload and three
button method. At the end factory reset..
Best regards
Click to expand...
Click to collapse
same problem but it shows update package does not exist.
muhammad22295bilal said:
same problem but it shows update package does not exist.
Click to expand...
Click to collapse
Hello dude please type here your phone model and firmware you're currently using.
Have a happy holidays
unable to mount vendor.
Dadditz said:
Hello dude please type here your phone model and firmware you're currently using.
Have a happy holidays
Click to expand...
Click to collapse
i have installed twrp, creat backup and went on to change the cust to 185 from c432. its bricked , i restored my backup but it went in boot loop with huawei logo, then i want to install coustom rom it said
"failed to mount '/vendor '(invalid argument) "
"failed to mount '/product '(invalid argument) "
its not end yet then i factory reset , restore again this time it doesnt goes to boot loop, but an error message "unable to wipe vendor"
__**** files attached****___
muhammad22295bilal said:
i have installed twrp, creat backup and went on to change the cust to 185 from c432. its bricked , i restored my backup but it went in boot loop with huawei logo, then i want to install coustom rom it said
"failed to mount '/vendor '(invalid argument) "
"failed to mount '/product '(invalid argument) "
its not end yet then i factory reset , restore again this time it doesnt goes to boot loop, but an error message "unable to wipe vendor"
__**** files attached****___
Click to expand...
Click to collapse
Dear user,
I really would like to help you, but do you really want it?
You were stuck on the update problem, you did it on your own and now you have TWRP and backup problems.
Also you did not answer any of my questions,
for me it's ok, but how can someone help you?
Good luck dear ..
Greetings
vns-l21c432 and p9 lite
Dadditz said:
Dear user,
I really would like to help you, but do you really want it?
You were stuck on the update problem, you did it on your own and now you have TWRP and backup problems.
Also you did not answer any of my questions,
for me it's ok, but how can someone help you?
Good luck dear ..
Greetings
Click to expand...
Click to collapse
p9 lite with vns-l21
muhammad22295bilal said:
p9 lite with vns-l21
Click to expand...
Click to collapse
Complete firmware please...
VNS-L21C432B??
TWRP you are using ?
What you're planning to do...
Wish you have a stock firmware / rebrand to C185
or flash a custom roms.
vns-l21c432b504
Dadditz said:
Complete firmware please...
VNS-L21C432B??
TWRP you are using ?
What you're planning to do...
Wish you have a stock firmware / rebrand to C185
or flash a custom roms.
Click to expand...
Click to collapse
the installed frimware was vns-l21c432b504 , then i want to go back to c185 so i installed twrp to make my phone root and to install c185 , it shows error i took restore of backup and phone goes to boot loop with huawei logo, then i again restore failed again. simply i have
p9lite
twrp recovery 3.1.1.0
when i restore my back up at last it shows "unable to wipe vendor" , but when i install other imges file it shows
"unable to mount vendor "
"unable to mount product".
now i just want my working phone back please healp
muhammad22295bilal said:
the installed frimware was vns-l21c432b504 , then i want to go back to c185 so i installed twrp to make my phone root and to install c185 , it shows error i took restore of backup and phone goes to boot loop with huawei logo, then i again restore failed again. simply i have
p9lite
twrp recovery 3.1.1.0
when i restore my back up at last it shows "unable to wipe vendor" , but when i install other imges file it shows
"unable to mount vendor "
"unable to mount product".
now i just want my working phone back please healp
Click to expand...
Click to collapse
Hello dear,
We will try to make your last one work
system, ie the L21C432B504.
Do you still have access to the system?
Do you have access to TWRP?
Do you have access to fastboot?
You have tried to install the oeminfo file
and this may have closed the bootloader,
so I invite you first, even if it says that it is unlocked, to re-unlock it,
but not before you have made backups of your stuff, as a factory reset will be done.
Reply me when you ready ...
here is your answers brother.
Dadditz said:
Hello dear,
We will try to make your last one work
system, ie the L21C432B504.
Do you still have access to the system?
Do you have access to TWRP?
Do you have access to fastboot?
You have tried to install the oeminfo file
and this may have closed the bootloader,
so I invite you first, even if it says that it is unlocked, to re-unlock it,
but not before you have made backups of your stuff, as a factory reset will be done.
Reply me when you ready ...
Click to expand...
Click to collapse
no access to system,
access to twrp
access to fasatboot
bootloader and phone both unlocked.
muhammad22295bilal said:
no access to system,
access to twrp
access to fasatboot
bootloader and phone both unlocked.
Click to expand...
Click to collapse
Ok dude reboot to fastboot and
unlock again your bootloader.
After factory reset see if have access to system...
Tell me...
no access to system.
Dadditz said:
Ok dude reboot to fastboot and
unlock again your bootloader.
After factory reset see if have access to system...
Tell me...
Click to expand...
Click to collapse
after unlock bootloader , cant access to system
Hello, it is my first post on this forum and it of course has to be problem. I am not expert in mobile phone hacking/flashing and this issue is too big for me to handle.
So like 6 hours ago i had working p8lite L21 with official android 6.0 and locked bootloader. I really wanted install costum rom due to performance issue, so i downgrade it back to 5.0 lolipop, than I root it with kingroot and successful extract key and unlock it using this tutorial: https://forum.xda-developers.com/newthread.php?do=newthread&f=4627
Than I flash recovery and install TWRP 3.0.2-0 and it all just worked. I was so happy that i manage to pull this off and I forgot that now i have EMUI 3.1 (ALE-L21C432B170) and i flashed phone with this:
https://forum.xda-developers.com/p8lite/development/rom-lineageos-14-1-p8-lite-t3824247
Of course it bricked because I missed that part with special version of TWRP. After that i tried to install something older just to get phone to work again:
https://forum.xda-developers.com/p8lite/development/rom-cyanogenmod-13-0-ale-l21-t3708835
And surprise, surprise, it did not work either and now I am stuck with huawei boot logo.
I did some research how to fix this issue, but i found so many different problems and solutions, I thought that at this point I really should ask for help because I just have no idea what i am doing now At this stage, can i just flash some costum rom (idc what exactly, just wanna to be lightweight) or i have to somehow restore original firmware? And if so how to do it? As i mentioned, i had access to TWRP.
Thanks a lot for your help in advance.
can someone help me with unbricking this phone? ?
@edit ok nevermind, i thought that this phone is cheap anyways so why not risk and just flashed boot/recovery/system from stock rom with fastboot. I did it and it works again, i needed just this simple hint to do it but i guess p8lite forum is dead.
ChuZZZta said:
Hello, it is my first post on this forum and it of course has to be problem. I am not expert in mobile phone hacking/flashing and this issue is too big for me to handle.
So like 6 hours ago i had working p8lite L21 with official android 6.0 and locked bootloader. I really wanted install costum rom due to performance issue, so i downgrade it back to 5.0 lolipop, than I root it with kingroot and successful extract key and unlock it using this tutorial: https://forum.xda-developers.com/newthread.php?do=newthread&f=4627
Than I flash recovery and install TWRP 3.0.2-0 and it all just worked. I was so happy that i manage to pull this off and I forgot that now i have EMUI 3.1 (ALE-L21C432B170) and i flashed phone with this:
https://forum.xda-developers.com/p8lite/development/rom-lineageos-14-1-p8-lite-t3824247
Of course it bricked because I missed that part with special version of TWRP. After that i tried to install something older just to get phone to work again:
https://forum.xda-developers.com/p8lite/development/rom-cyanogenmod-13-0-ale-l21-t3708835
And surprise, surprise, it did not work either and now I am stuck with huawei boot logo.
I did some research how to fix this issue, but i found so many different problems and solutions, I thought that at this point I really should ask for help because I just have no idea what i am doing now At this stage, can i just flash some costum rom (idc what exactly, just wanna to be lightweight) or i have to somehow restore original firmware? And if so how to do it? As i mentioned, i had access to TWRP.
Thanks a lot for your help in advance.
Click to expand...
Click to collapse
Can you access TWRP or fastboot mode?? Yes, the thread has been quite inactive... it used to be totally different few years back...
amageek said:
Can you access TWRP or fastboot mode?? Yes, the thread has been quite inactive... it used to be totally different few years back...
Click to expand...
Click to collapse
Yea, i had access to twrp and fastboot. I already fixed it by flashing stock rom with fastboot. But maybe you can help me with other issue, currently i have android 5.0.1 emui 3.1 build c432b170 and i wanna install this rom:
https://forum.xda-developers.com/p8lite/development/rom-lineageos-14-1-p8-lite-t3824247
as i understand i need to have android 7.0 with emui 4.1, install costum twrp and than flash this rom. But how to update this phone to android 7.0? When i check for updates it says that there is nothing to update
ChuZZZta said:
Yea, i had access to twrp and fastboot. I already fixed it by flashing stock rom with fastboot. But maybe you can help me with other issue, currently i have android 5.0.1 emui 3.1 build c432b170 and i wanna install this rom:
https://forum.xda-developers.com/p8lite/development/rom-lineageos-14-1-p8-lite-t3824247
as i understand i need to have android 7.0 with emui 4.1, install costum twrp and than flash this rom. But how to update this phone to android 7.0? When i check for updates it says that there is nothing to update
Click to expand...
Click to collapse
I believe I can help you... Check the First Comment of that post... you'll see two additional firmwares... Only those firmwares have EMUI 4.1... b896 is for dual sim and b895 is for single sim... use any of those as per your requirements... after that download the LineageOS firmware and then proceed as per the Thread's recommended way... Also, before installing LineageOS, make sure you don't have any lockscreen lock...
feel free to ask if you have any more questions...
PS: i may reply bit late... maybe an hour, 5 hours or even days... but will try to check frequently..
amageek said:
PS: i may reply bit late... maybe an hour, 5 hours or even days... but will try to check frequently..
Click to expand...
Click to collapse
No worries, im happy that someone reply to me
So yea, i noticed those two softwares, i have two imei number so i picked b896 version for dual sim, but when i extract it and place in dload folder and try to update it via holding power button + -, i get software installation failed message. So I am not rly sure how to install this firmware, do i have to extract update.app and flash recovery/boot/system with fastboot, or i need to install it using some twrp? I look for guide but everyone are using this powerbutt + - methode to do this
ChuZZZta said:
No worries, im happy that someone reply to me
So yea, i noticed those two softwares, i have two imei number so i picked b896 version for dual sim, but when i extract it and place in dload folder and try to update it via holding power button + -, i get software installation failed message. So I am not rly sure how to install this firmware, do i have to extract update.app and flash recovery/boot/system with fastboot, or i need to install it using some twrp? I look for guide but everyone are using this powerbutt + - methode to do this
Click to expand...
Click to collapse
Do you mean Vol +, Vol - and Power Button by powerbutton +- ? That's one way of flashing it, if you get error by that method, try it once again. If it doesn't work at all, then yes extract the update.app and go for the hard way...
amageek said:
Do you mean Vol +, Vol - and Power Button by powerbutton +- ? That's one way of flashing it, if you get error by that method, try it once again. If it doesn't work at all, then yes extract the update.app and go for the hard way...
Click to expand...
Click to collapse
Yea, i mean that i holding all three buttons (power vol+ vol-) and than it just says that installation failed. To flash it with fastboot i need to just flash recovery/boot/system or more files? I am asking because currently i have android 5 and this firmware is android 7 and I am just not sure if i can just simply flash those files and it will works.
Thanks for helping me
ChuZZZta said:
Yea, i mean that i holding all three buttons (power vol+ vol-) and than it just says that installation failed. To flash it with fastboot i need to just flash recovery/boot/system or more files? I am asking because currently i have android 5 and this firmware is android 7 and I am just not sure if i can just simply flash those files and it will works.
Thanks for helping me
Click to expand...
Click to collapse
Which one are you trying to flash??? b896?? or simply LineageOS??
If it's b896, then I did read that it can only be flashed on ALE-L21C02xxx, but i am unsure about it... I did installed LineageOS and Resurrection Remix back in the days but I don't think I ever used C02 ROM for B896...
Also if you have the latest TWRP, you can simply flash with it... Try it...
Here's the link for tutorial
hi everyone
i have p9 lite l31 with emui 4.1.1 and mm
i can't update it to nougat can anyone tell me how ? i tried with dload and twrp and still can't
pls if u have full method tell me or give me link
ps : bootloader unlocked
rrr8 said:
hi everyone
i have p9 lite l31 with emui 4.1.1 and mm
i can't update it to nougat can anyone tell me how ? i tried with dload and twrp and still can't
pls if u have full method tell me or give me link
ps : bootloader unlocked
Click to expand...
Click to collapse
Hello,
what is your complete firmware ?
EX. VNS-L31C432B160
EX. VNS-L31C185B151
EX. VNS-L31C636B170
Having this info you can use Firmware Finder app
and upgrade to Emui 5, android 7.
I can help you doing this...
Cheers
Dadditz said:
Hello,
what is your complete firmware ?
EX. VNS-L31C432B160
EX. VNS-L31C185B151
EX. VNS-L31C636B170
Having this info you can use Firmware Finder app
and upgrade to Emui 5, android 7.
I can help you doing this...
Cheers
Click to expand...
Click to collapse
hi, thank you for your help
my complete firmware is VNS-L31C432B160
can you figure out how to update ?
rrr8 said:
hi, thank you for your help
my complete firmware is VNS-L31C432B160
can you figure out how to update ?
Click to expand...
Click to collapse
If you have TWRP on board, download two files from link, copy it to the SD card. Reboot in TWRP, flash first file update.zip , go back to the TWRP main menu and flash second file hw_eu.zip . Reboot system and do factory reset from Stock recovery .
Links (VNS-L31C432B370):
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v80460/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...-L31_hw_eu/update_data_full_VNS-L31_hw_eu.zip
thank you,
yes i have twrp but i don't know if it's the right version to install this rom
i'll try this asap and tell you about the result
rrr8 said:
thank you,
yes i have twrp but i don't know if it's the right version to install this rom
i'll try this asap and tell you about the result
Click to expand...
Click to collapse
Use this TWRP:
https://mega.nz/#!MsNXRCgI!4ZQW2ebrN-cvO21J9lJ2qz3UYwcE3onMFZzRMcdRY9o
TWRP for Nougat:
https://mega.nz/#!EsESQQhK!uc_lfXEfDW6U7Lq2VeNOYq5OWUID0G-YyhK-oUL4deU
It's recommended to install TWRP over the huawei eRecovery with the command
fastboot flash recovery2 twrp.img
bozka1 said:
Use this TWRP:
https://mega.nz/#!MsNXRCgI!4ZQW2ebrN-cvO21J9lJ2qz3UYwcE3onMFZzRMcdRY9o
TWRP for Nougat:
https://mega.nz/#!EsESQQhK!uc_lfXEfDW6U7Lq2VeNOYq5OWUID0G-YyhK-oUL4deU
It's recommended to install TWRP over the huawei eRecovery with the command
fastboot flash recovery2 twrp.img
Click to expand...
Click to collapse
thank you for all your help, sry for the late tho.
i'll try this TWRP and inform you about the result.
btw, if i flash it as recovery2, how can i boot it ?
rrr8 said:
thank you for all your help, sry for the late tho.
i'll try this TWRP and inform you about the result.
btw, if i flash it as recovery2, how can i boot it ?
Click to expand...
Click to collapse
I automatically wrote 'recovery2', but in this case it doesn't matter, the new FW will overwrite TWRP.
I apologize for the unnecessary complication .
(Why recovery2 ? eRecovery is basically useless on this phone. It's useful flash TWRP over it by having stock recovery as 'recovery' and TWRP as 'eRecovery' (recovery2).
Among other things, you can have access to official OTA updates yet still being able to do everything you could do with TWRP etc. etc.
It makes things easier
How to boot it:
reboot your phone, as soon as the "yellow warning" appears on the screen, hold down the Volume Up for 3 seconds, phone will boot in TWRP.)
bozka1 said:
I automatically wrote 'recovery2', but in this case it doesn't matter, the new FW will overwrite TWRP.
I apologize for the unnecessary complication .
(Why recovery2 ? eRecovery is basically useless on this phone. It's useful flash TWRP over it by having stock recovery as 'recovery' and TWRP as 'eRecovery' (recovery2).
Among other things, you can have access to official OTA updates yet still being able to do everything you could do with TWRP etc. etc.
It makes things easier
How to boot it:
reboot your phone, as soon as the "yellow warning" appears on the screen, hold down the Volume Up for 3 seconds, phone will boot in TWRP.)
Click to expand...
Click to collapse
thank you for all this, i'll try your method and hope it will work
rrr8 said:
hi, thank you for your help
my complete firmware is VNS-L31C432B160
can you figure out how to update ?
Click to expand...
Click to collapse
Dude,
i was replying to you suggesting to use Firmware Finder
in order to upgrade to android 7,
but i assume you will reach the same using @bozka1 guide.
Enjoy the community and good luck..
Cheers
bozka1 said:
If you have TWRP on board, download two files from link, copy it to the SD card. Reboot in TWRP, flash first file update.zip , go back to the TWRP main menu and flash second file hw_eu.zip . Reboot system and do factory reset from Stock recovery .
Links (VNS-L31C432B370):
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v80460/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...-L31_hw_eu/update_data_full_VNS-L31_hw_eu.zip
Click to expand...
Click to collapse
thanks, you saved my life, it worked !!
I successfully installed android 7 with emui 5 in my device, ty