Related
:highfive:HELLO GUYS
So Here u can Find How To Bypass Safetnet In Your Phone While Being Rooted.
As you all know safetynet is implemented by Google itself to check Security of your Device & also by Some games or apps Eg. Pokeman Go,Android pay,Snapchat etc. So If Your Phone Is Rooted SafetyNet Test Will Fail.
With failed Safetynet Test You Can't Run These Apps in Your Mobile.
Check your Safetynet Status By This App:- https://play.google.com/store/apps/details?id=com.scottyab.safetynet.sample
So If your Test Failed And you can't able to run Games or Some Apps Try This method
1. Fully Unroot Your Phone In SuperSu app Go to Settings tab on the top right corner, and then click Full Unroot. Confirm with 'Continue'. 3. Once this operation is done, which takes a few minutes, you can reboot your Android & Then Flash This Unroot Script In Custom Recovery
https://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893
2. Download Magisk 12.0 http://tiny.cc/latestmagisk and Flash it in Custom Recovery & Reboot **Make sure in custom recovery if a Line Appears "Boot img already patched" That means You'r Not Fully Unrooted in this case you have to flash your Stock System.img or Stock rom**
3. Now Install Magisk Manager From Play Store https://play.google.com/store/apps/details?id=com.topjohnwu.magisk
4 In Magisk manager Go To Settings Click on Enable BusyBox & Magisk Hide
5. Thats it. Now Run Safetynet test in Magisk Manager It will pass.
6.Enjoy your Games or Apps
UPDATE :- With Android Security Patch 01/04/2016 On Marshmallow Flashed SuperSu 2.79 Flashed Suhide 0.55 Flashed Magisk 12.0 Flashed Xposed 87.0 Systemless PASSING SAFETY NET Without Disabling root
Credits :-
@topjohnwu For Magisk 12.0 & Magisk Manager App
@halifax For Unroot Su Script
Hey, I have a problem:
I used this script on my Galaxy Nexus but now I decided to use SuperSU again because Magsik didn't work for me. I have just one problem: After using this script I can't install SuperSU anymore. The installation works as usual without problems but if I open the SU app it sais I need a Su file flashed. Could you please help me to fix thid problem?
Thanks in advance,
greetings Nils
yo_honey said:
:highfive:HELLO GUYS
So Here u can Find How To Bypass Safetnet In Your Phone While Being Rooted.
.....
1. Fully Unroot Your Phone In SuperSu app Go to Settings tab on the top right corner, and then click Full Unroot. Confirm with 'Continue'. 3. Once this operation is done, which takes a few minutes, you can reboot your Android & Then Flash This Unroot Script In Custom Recovery
https://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893
2. Download Magisk 12.0 http://tiny.cc/latestmagisk and Flash it in Custom Recovery & Reboot **Make sure in custom recovery if a Line Appears "Boot img already patched" That means You'r Not Fully Unrooted in this case you have to flash your Stock System.img or Stock rom**
3. Now Install Magisk Manager From Play Store https://play.google.com/store/apps/details?id=com.topjohnwu.magisk
4 In Magisk manager Go To Settings Click on Enable BusyBox & Magisk Hide
5. Thats it. Now Run Safetynet test in Magisk Manager It will pass.
6.Enjoy your Games or Apps
UPDATE :- With Android Security Patch 01/04/2016 On Marshmallow Flashed SuperSu 2.79 Flashed Suhide 0.55 Flashed Magisk 12.0 Flashed Xposed 87.0 Systemless PASSING SAFETY NET Without Disabling root
Credits :-
@topjohnwu For Magisk 12.0 & Magisk Manager App
@halifax For Unroot Su Script
Click to expand...
Click to collapse
Thanks my friend, u save my day, Samsung S6 Edge +.
Flash Latest SuperSu Zip in custom recovery
MrFlashGame said:
Hey, I have a problem:
I used this script on my Galaxy Nexus but now I decided to use SuperSU again because Magsik didn't work for me. I have just one problem: After using this script I can't install SuperSU anymore. The installation works as usual without problems but if I open the SU app it sais I need a Su file flashed. Could you please help me to fix thid problem?
Thanks in advance,
greetings Nils
Click to expand...
Click to collapse
Download Latest Stable version of SuperSu zip And Flash it Using Custom Recovery. This may solve your problem.
Hello, anyone have boot img for htc 820 dual sim?
Thank you
Hello friends, I am trying to install Magisk on a Galaxy s4 gt-i9515, non-rooted, with TWRP recovery device.
I tried both methods described in the official thread: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Both tries failed. I will now explain in more detail what I've done.
Before, note that I have a TWRP recovery of the state before flashing any zips/boot.img s, so I am constantly going back to the previous state which passes safetynet.
First try:
I simply took the magisk-v14.zip file and installed through TWRP. The installation had no errors and in the end TWRP claimed "success". TWRP asked me to reboot now.
I clicked on "Reboot", and then TWRP told that "My device is currently not rooted" and asked if I want to install root or reboot anyways. I rebooted anyways (I didn't let TWRP install his own root).
When the device boot up, I got into magisk manager, but sadly it was written that I am not rooted, and I don't have a magisk installed. Now, it also failed to pass safetynet.
At this point I used my Backup and got back to the state which I could pass safetynet (I've checked it again to make sure).
Second try:
I got the boot.img of the stock firmware I am currently using (I recently flashed this firmware, so it has to be the right boot.img).
I got into Magisk Manager and patched the boot.img. Magisk patched it into a file called "patched_boot.img.tar".
I got into download mode on my device, and flashed the .tar file via ODIN (AP option, ODIN version 3.12.3).
The device rebooted after the installation was "complete" according to ODIN: <OSM> All threads completed. (succeed 1 / failed 0).
When the device booted up, I entered the Magisk manager, and still, no root + no magisk installed. This time tho, it passed SN.
I used my backup again.
Now I am stuck. I really don't know what can I try anymore. Please suggest me ideas.
Up. I still need answers.
i have mnanaged to install latest stable version of magisk using latest twrp 3.1.1.0, and root management is in function. however, i cannot install any magisk module, tested xposed api21 but it does not install, also greenify4magisk still nothing to be noticed, unfortunately as there is yet no response i suppose its a lost cause, well lets just root manually supersu or things like that.
hi, Samsung S4 i 9505 I have not solved with Magisk and I don't even try "patched_boot.img.tar" the problem in it is apk and not the file it TWRP starts I remember apk EdXposed 2 years ago there were failures I thought about installing stock firmware/Rom with Frja Tool we talk about android 10/11 is android 5.0.1 I think there is only one way is SuperSu this root does not pose problems there is a saying: the more cooks around a dish, the more they ruin it"
I was able to install Magisk v24.3 today on my Galaxy S4 Mini LTE (GT-I9195) using partially the "Patching Images" method and TWRP 3.2.3. I had Magisk v23 installed but since a couple of weeks ago it kept crashing. So, I did the big mistake of uninstalling it to update to the latest version. It costed me half a day around this.
I could not flash zips in TWRP recovery (it always failed with Updater process ended with ERROR:1)
1 - Get a copy of the boot.img (for this step I had to find the installation file of my ROM. I did not know for sure which was it since it was installed 2 years ago. I have an AOPK based ROM and all the files from their website are not available anymore. All I could find was an older one on androidfilehost "aokp_serranoltexx_pie_unofficial_2020-01-18_1053.zip". Uncompress this zip to get the boot.img file.
2 - Copy the boot.img to your device filesystem.
3 - Power on the phone with "vol down+home+power" to enter TWRP, choose Install, Image, and flash boot.img, reboot
4 - Download and install the latest Magisk v24.3 apk
5 - Press the Install button in Magisk app (this means pressing the second “Install”, the one on front of App.)
6 - It should ask you to choose “Select and Patch a File”. Search and select the boot.img
7 - If all goes well, it should create a file named magisk_patched_[random_strings].img
8 - Power on the phone with "vol down+home+power" to enter TWRP, choose Install, Image, and flash magisk_patched_[random_strings].img, reboot
9 - Reboot and confirm in Magisk app if it says “Installed 24.3 (24300)“.
Now I get a warning "Your device needs additional setup for magisk to work properly... reboot" when entering Magisk, but it seems to work fine.
I have a bottle of champagne saved for the day when windows laptops are miniaturized and android is discontinued from the market. Bootloaders, recoveries, ramdisk, getting root, knox, odin, oem unlockings, CSCs, APs, customs kernels, adb, vbmeta, adoptable storage, se policies, fastboot modes, download modes... damn. They couldn't make it more complex if they tried.
Oneplus 5, Official ROM, H2OS, Android 7.1
1. First time, I followed https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877 and successfully install TWRP and root using Supersu. I can goes into TWRP recovery without any problem. I notice that the supersu I installed in a systemless one, some apps can't get root access, like AD Away, Titanium Backup. But most apps can work with it. I used the one of the two root method in that tutorial as follows:
For Users who want to remain Encrypted:
1. Boot into TWRP Recovery and allow system modifications.
2. Swipe right and enable modifications.
3. Select your preferred Language, Tap “Never show this screen on boot again,” and Swipe allow modification.
4. Navigate to Install and select Magisk Or SuperSU to root OnePlus 5.
5. Swipe to confirm the flash
6. Reboot System
Click to expand...
Click to collapse
2. After several months I want to upgrade the original H2OS to new version, so I unroot in Supersu first, when it ask me if I want to recover Boot Image, I say "Yes", and say "NO" when ask me if I want to recover Recovery Image. Then I upgrade to the new H2OS v13 (Android 7.1) using the Full package through TWRP, after that I reinstall TWRP 3.2.1, it was successful. But it doesn't ask me to allow it to make modification. I tried to install Supersu 2.82 and 2.82 SR5 using the same method as in tutorial, at the end of "Booting Image patcher" it shows
.........
-Calling user ramdisk patch script
---Failure, aborting
-Unmounting /system and /vender
-Done
Click to expand...
Click to collapse
Then I reboot to recovery, it return to official REC, not TWRP, and system says there is no root.
netsonic said:
Oneplus 5, Official ROM, H2OS, Android 7.1
1. First time, I followed https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877 and successfully install TWRP and root using Supersu. I can goes into TWRP recovery without any problem. I notice that the supersu I installed in a systemless one, some apps can't get root access, like AD Away, Titanium Backup. But most apps can work with it. I used the one of the two root method in that tutorial as follows:
2. After several months I want to upgrade the original H2OS to new version, so I unroot in Supersu first, when it ask me if I want to recover Boot Image, I say "Yes", and say "NO" when ask me if I want to recover Recovery Image. Then I upgrade to the new H2OS v13 (Android 7.1) using the Full package through TWRP, after that I reinstall TWRP 3.2.1, it was successful. But it doesn't ask me to allow it to make modification. I tried to install Supersu 2.82 and 2.82 SR5 using the same method as in tutorial, at the end of "Booting Image patcher" it shows
Then I reboot to recovery, it return to official REC, not TWRP, and system says there is no root.
Click to expand...
Click to collapse
Just use the latest universal codeworks recovery and flash it via fastboot.
For root i suggest use of Magisk over Su, the latest 15.3 works fine for me.
What is the codeworks recovery? Is it "twrp-3.2.1-0-cheeseburger.img" on https://twrp.me/oneplus/oneplus5.html?
netsonic said:
What is the codeworks recovery? Is it "twrp-3.2.1-0-cheeseburger.img" on https://twrp.me/oneplus/oneplus5.html?
Click to expand...
Click to collapse
No, it's the -universal- one from here https://forum.xda-developers.com/on...overy-twrp-3-2-1-0-oreo-oxygenos-5-0-t3725723
I can flash universal TWRP and Magisk 15.3. But Magisk show "SafetyNet API Error"? How to fix it?
Is there a way to update system to .14 and preserve TWRP?
I know that I can preserve Magisk, but I don't want to lose TWRP because I need to flash few more things.
Two more constraints:
I don't want to lose data
I don't have access to pc
In what steps I can achieve it, if any?
Yes, just go to TWRP with your OTA file, install the OTA file (in TWRP!), don't restart and install the ZIP file of the TWRP, reboot to recovery, flash magisk and reboot. Done. You'll still with your TWRP, rooted and updated.
MatheusPimentel said:
Yes, just go to TWRP with your OTA file, install the OTA file (in TWRP!), don't restart and install the ZIP file of the TWRP, reboot to recovery, flash magisk and reboot. Done. You'll still with your TWRP, rooted and updated.
Click to expand...
Click to collapse
Exactly. But make sure to only use the full OTA and not the incremental one.
Full guide
1. Go to TWRP
2. Flash FULL ROM
3. Flash TWRP INSTALLER (if u fail to u will lose TWRP)
4. Reboot your device. (yes boot it...and access your phone)
5. Reboot back to TWRP
6. Flash Magisk
Working method...tried nd tested 50+ times
The following also works. Follow it precisely.
> Install the update through the OS Update UI.
> Open Magisk Manager and find the module that preserves TWRP. Flash it. It won't appear in the module list. Don't restart yet, you'll lose Magisk if you do.
> Open Magist Manager and click "install". Install to inactive slot (OTA)
> Reboot!
Done this a few times now, it's actually more convenient than booting to TWRP.
I use always that way. The module is called TWRP_A_B_Retention_Script-Magisk.zip.
Open Magisk Manager > Downloads and it's called : TWRP A/B Retention Script.
To find it easy order by name. Default it's by last update.
https://forum.xda-developers.com/showpost.php?p=79358976&postcount=2012
Done.
Thank you all.
Update 220823: Update for TWRP 12 and some other minor changes due to the switch from SafetyNet API to Play Integrity API
Updated 211203: include Magisk Canary
Edited 220113: correct a mistake in the Keeping Root process; some formatting changes
I keep seeing posts that say you can't root OOS after an OTA unless you have a full image installation zip. That's just not true these days (September 2021).
You can use @osm0sis' method in https://forum.xda-developers.com/t/...ices-platforms.2239421/page-149#post-84764713
And @g96818 suggests using "Install to inactive slot" which works provided you do it properly - see https://forum.xda-developers.com/t/...00-kb2001-kb2003-kb2005.4178675/post-85801253.
And here's how to do it using TWRP.
What you'll need:
OOS 11: TWRP image (.img) and (optionally) installer zip from https://forum.xda-developers.com/t/recovery-11-alpha-teamwin-recovery-project-8t-kebab.4302449
OOS 12: TWRP image (.img) and (optionally) installer zip from https://forum.xda-developers.com/t/...win-recovery-project-8t-9r-2022-07-27.4473983
Magisk apk - using stable from https://github.com/topjohnwu/Magisk/releases or using Canary from https://github.com/topjohnwu/magisk-files/tree/canary
Universal SafetyNet Fix (UNSF-MOD) by @Displax from https://github.com/Displax/safetynet-fix/tree/integrity
I'm also assuming you have an unlocked bootloader, know how to use fastboot, how to use TWRP, and how to use Magisk.
I'll go through rooting a currently unrooted version of OOS and then doing an incremental update OTA.
Root unrooted OOS
Install the Magisk APK. I find that this works nicer than letting the stub download the full app the first time you use it.
Boot into bootloader mode.
Boot TWRP using fastboot boot x.img where x.img is the TWRP image file.
Take a backup of the current boot and recovery partitions as you'll need them for successfully updating when the next incremental OTA becomes available.
Install the Magisk APK, just like you would install any zip file in TWRP. Note: the APK must be named Magisk-*.apk otherwise TWRP won't list it. Also install USNF if you are using Magisk Canary.
If you want to keep TWRP then install the TWRP installer zip.
Reboot.
If you are using Magisk Canary, in Magisk>Settings enable Zygisk, Enforce DenyList, and Configure DenyList. Then reboot.
Keeping Root on an incremental OTA update
Note: you do NOT need to (but can if you want to) follow this process if you're installing a full OTA. You only need to install the full OTA and then install Magisk to the inactive slot and reboot from Magisk when it prompts you.
If your phone tells you you have an update:
If you have TWRP installed, then boot into TWRP and restore the stock recovery and reboot.
In Magisk tap on "Uninstall Magisk" and select "Restore images".
Install the OTA update but don't reboot yet.
Turn on airplane mode so that apps can't call SafetyNet when you reboot the phone without root.
Reboot
When the phone has successfully rebooted the updated system, boot into bootloader mode.
Boot TWRP using fastboot boot x.img where x.img is the TWRP image file.
Take a backup of the current recovery partition as you'll need it for successfully updating when the next incremental OTA becomes available.
Install the Magisk APK, just like you would any zip file in TWRP. Note: the APK file name must start with Magisk- otherwise TWRP won't list it. Your existing Magisk settings, modules, and [hidden] Magisk app will be preserved.
If you want to keep TWRP then flash the TWRP installer zip.
Reboot and disable airplane mode.
BillGoss said:
I keep seeing posts that say you can't root OOS after an OTA unless you have a full image installation zip. That's just not true these days (September 2021).
You can use @osm0sis' method in https://forum.xda-developers.com/t/...ices-platforms.2239421/page-149#post-84764713
And @g96818 suggest this method (https://forum.xda-developers.com/t/...1-kb2003-kb2005.4178675/page-25#post-85386145) but this doesn't work for everybody (it doesn't for me).
And here's how to do it using TWRP.
What you'll need:
• TWRP image (.img) and (optionally) installer zip from https://forum.xda-developers.com/t/recovery-11-alpha-teamwin-recovery-project-8t-kebab.4302449/
• Magisk apk - I'm using v23.0 stable from https://github.com/topjohnwu/Magisk/releases/
I'm also assuming you have an unlocked bootloader, know how to use fastboot, how to use TWRP, and how to use Magisk.
I'll go through rooting a currently unrooted version of OOS and then doing an incremental update OTA.
Root unrooted OOS
1. Install the Magisk APK. I find that this works nicer than letting the stub download the full app the first time you use it.
2. Boot into bootloader mode
3. Boot TWRP using fastboot boot x.img where x.img is the TWRP image file
4. Take a backup of the current boot and recovery partitions as you'll need them for successfully updating when the next incremental OTA becomes available
5. Install the Magisk APK, just like you would install any zip file in TWRP. Note: the APK must be named Magisk-*.apk otherwise TWRP won't list it.
6. If you want to keep TWRP then install the TWRP installer zip.
7. Reboot
Keeping Root on an OTA update
If your phone tells you you have an update:
1. If you have TWRP installed, then boot into TWRP and restore the stock recovery and reboot
2. In Magisk tap on "Uninstall Magisk" and select "restore images". Or, if you're like using terminal commands, restore the stock boot image (you backed it up with TWRP) to the current slot using dd
3. Install the OTA update but don't reboot yet.
4. Turn on airplane mode so that apps can't call SafetyNet when you reboot the phone without root
5. Reboot
6. When the phone has successfully rebooted the updated system, boot into bootloader mode
7. Boot TWRP using fastboot boot x.img where x.img is the TWRP image file
8. Take a backup of the current boot and recovery partitions as you'll need them for successfully updating when the next incremental OTA becomes available
9. Clean up old Magisk backup copies of stock boot images by using File Manager to delete /data/magisk_backup_* directories
10. Install the Magisk APK, just like you would any zip file in TWRP. Note: the APK file name must start with Magisk- otherwise TWRP won't list it. Your existing Magisk settings, modules, and [hidden] Magisk app will be preserved.
11. If you want to keep TWRP then flash the TWRP installer zip.
12. Reboot and disable airplane mode
Click to expand...
Click to collapse
ctsProfile fails. Is there a way to fix it? Tried stable Magisk and Canary.
morphius88 said:
ctsProfile fails. Is there a way to fix it? Tried stable Magisk and Canary.
Click to expand...
Click to collapse
Best place for getting support for Magisk is https://forum.xda-developers.com/t/magisk-general-support-discussion.3432382/
Hi,
Thanks for the guide!
What can i do if i forgot to backup stock boot and recovery?
berthur said:
Hi,
Thanks for the guide!
What can i do if i forgot to backup stock boot and recovery?
Click to expand...
Click to collapse
You have a number of options:
If your update was an incremental OTA:
1. Ask in the Q&A forum or in one of the update threads if someone can share those two partitions with you.
2. If you're on 11.0.10.10kb05aa then you can get boot from a number of the update/rooting threads and the recovery from this thread by @mslezak https://forum.xda-developers.com/t/...-rooted-users-install-from-fastbootd.4316147/
3. Use this tool by @mslezak to create the full partitions from an incremental update https://forum.xda-developers.com/t/...urrently-op8t-11-0-9-9-kb05aa-posted.4314677/
If you updated using a full installation zip:
- use payload dumper to extract the two partitions from payload.bin
BillGoss said:
You have a number of options:
If your update was an incremental OTA:
1. Ask in the Q&A forum or in one of the update threads if someone can share those two partitions with you.
2. If you're on 11.0.10.10kb05aa then you can get boot from a number of the update/rooting threads and the recovery from this thread by @mslezak https://forum.xda-developers.com/t/...-rooted-users-install-from-fastbootd.4316147/
3. Use this tool by @mslezak to create the full partitions from an incremental update https://forum.xda-developers.com/t/...urrently-op8t-11-0-9-9-kb05aa-posted.4314677/
If you updated using a full installation zip:
- use payload dumper to extract the two partitions from payload.bin
Click to expand...
Click to collapse
Than you!
Hello!
Does someone have a backup of the Stock recovery from OOS 11.0.10.10.KB05BA and can share it here?
Thanks in advance.
Wishmasterflo said:
Hello!
Does someone have a backup of the Stock recovery from OOS 11.0.10.10.KB05BA and can share it here?
Thanks in advance.
Click to expand...
Click to collapse
Download the zip from https://forum.xda-developers.com/t/oneplus-8t-rom-ota-oxygen-os-repo-of-oxygen-os-builds.4193183/ and then use payload dumper to extract the files.
That worked like a charm. Thanks a lot.
I'm Magisk rooted and I have TWRP installed on my 8T EU model.
The OnePlus updater app registers that I am rooted and wants to download the full OTA.
Do I also have to do all the things you described after "Keeping Root on an OTA update" or is there a simpler way?
If yes, then I have a question regarding this step:
2. In Magisk tap on "Uninstall Magisk" and select "restore images".
Click to expand...
Click to collapse
Did Magisk automatically backup these images? Because I didn't do it myself. I only have backed up all my partitions (including boot) after I had installed TWRP and before I rooted.
EDIT:
BillGoss has thankfully already replied in another thread (in which I have basically asked the same question because I am an impatient bast***) where I suggested the overly present "easy" update scheme, which he expects to work. So this should be fine for other people in my situation:
1. Let the system download and install full OTA and DO NOT let the device reboot after it's done
2. Install TWRP A/B Retention Script
3. Install Magisk to inactive slot and reboot
EDIT2:
I just want to add that before having done the above mentioned steps 1-3, I have disabled all Magisk modules and rebooted the device. So the full procedure is the following:
1. Disable all Magisk modules and reboot
2. Let the system download and install full OTA and DO NOT let the device reboot after it's done
3. Install TWRP A/B Retention Script
4. Install Magisk to inactive slot and reboot
Youtube step by step video (he says that he "uninstalls" the Magisk modules but he just deactivates them):
Thanks @haitower
I've updated the OP to make it clear that the process described there only applies to incremental updates.
Also, to answer your question re Magisk backups: Magisk writes a copy of the installed boot image to /data/Magisk* before patching it. A "restore image" uses that backup.
BillGoss said:
I keep seeing posts that say you can't root OOS after an OTA unless you have a full image installation zip. That's just not true these days (September 2021).
You can use @osm0sis' method in https://forum.xda-developers.com/t/...ices-platforms.2239421/page-149#post-84764713
And @g96818 suggests using "Install to inactive slot" but this doesn't work for everybody (it doesn't for me) which works provided you do it properly - see https://forum.xda-developers.com/t/...00-kb2001-kb2003-kb2005.4178675/post-85801253.
And here's how to do it using TWRP.
What you'll need:
• TWRP image (.img) and (optionally) installer zip from https://forum.xda-developers.com/t/recovery-11-alpha-teamwin-recovery-project-8t-kebab.4302449/
• Magisk apk - I'm using v23.0 stable from https://github.com/topjohnwu/Magisk/releases/
I'm also assuming you have an unlocked bootloader, know how to use fastboot, how to use TWRP, and how to use Magisk.
I'll go through rooting a currently unrooted version of OOS and then doing an incremental update OTA.
Root unrooted OOS
1. Install the Magisk APK. I find that this works nicer than letting the stub download the full app the first time you use it.
2. Boot into bootloader mode
3. Boot TWRP using fastboot boot x.img where x.img is the TWRP image file
4. Take a backup of the current boot and recovery partitions as you'll need them for successfully updating when the next incremental OTA becomes available
5. Install the Magisk APK, just like you would install any zip file in TWRP. Note: the APK must be named Magisk-*.apk otherwise TWRP won't list it.
6. If you want to keep TWRP then install the TWRP installer zip.
7. Reboot
Keeping Root on an incremental OTA update
Note: you do NOT need to follow this process if you're installing a full OTA. You only need to install the full OTA and then install Magisk to the inactive slot and reboot from Magisk when it prompts you
If your phone tells you you have an update:
1. If you have TWRP installed, then boot into TWRP and restore the stock recovery and reboot
2. In Magisk tap on "Uninstall Magisk" and select "restore images". Or, if you're like using terminal commands, restore the stock boot image (you backed it up with TWRP) to the current slot using dd
3. Install the OTA update but don't reboot yet.
4. Turn on airplane mode so that apps can't call SafetyNet when you reboot the phone without root
5. Reboot
6. When the phone has successfully rebooted the updated system, boot into bootloader mode
7. Boot TWRP using fastboot boot x.img where x.img is the TWRP image file
8. Take a backup of the current boot and recovery partitions as you'll need them for successfully updating when the next incremental OTA becomes available
9. Clean up old Magisk backup copies of stock boot images by using File Manager to delete /data/magisk_backup_* directories
10. Install the Magisk APK, just like you would any zip file in TWRP. Note: the APK file name must start with Magisk- otherwise TWRP won't list it. Your existing Magisk settings, modules, and [hidden] Magisk app will be preserved.
11. If you want to keep TWRP then flash the TWRP installer zip.
12. Reboot and disable airplane mode
Click to expand...
Click to collapse
Hello,
Thank You for the detailed description, it helped me a lot.
I'm new with the Oneplus 8T phone. The last handset I had was the Mi MIX 2. The rules of using root are familiar to me and I understand everything from your description. I only have a question about TWRP, once I have them permanently installed on device, can I backup the system or date partition via TWRP? I always made backups in case i messed up something and didn't work properly.
This question came from https://twrp.me/oneplus/oneplus8t.html
They write there:
"This device uses Dynamic Partitions
This means that TWRP will not allow modifications to any of the partitions that make up the Super partition on the stock ROM. All backups and restores will include the full Super partition rather than the individual dynamic partitions.
In order to flash the individual partitions, you will have to boot into fastbootd."
I would be grateful for Your information, Thank You.
e1thx said:
Hello,
Thank You for the detailed description, it helped me a lot.
I'm new with the Oneplus 8T phone. The last handset I had was the Mi MIX 2. The rules of using root are familiar to me and I understand everything from your description. I only have a question about TWRP, once I have them permanently installed on device, can I backup the system or date partition via TWRP? I always made backups in case i messed up something and didn't work properly.
This question came from https://twrp.me/oneplus/oneplus8t.html
They write there:
"This device uses Dynamic Partitions
This means that TWRP will not allow modifications to any of the partitions that make up the Super partition on the stock ROM. All backups and restores will include the full Super partition rather than the individual dynamic partitions.
In order to flash the individual partitions, you will have to boot into fastbootd."
I would be grateful for Your information, Thank You.
Click to expand...
Click to collapse
See post #3 in https://forum.xda-developers.com/t/...recovery-project-8t-kebab-2021-29-11.4302449/
Hello!
Today I saw that EU: 11.0.12.12.KB05BA was available as OTA Update so I started to download it using the "Keep root on OTA Update".
During the download I recognized that I was still only connected to mobile network 4G instead of WiFi.
So I stopped the download of the OTA, restarted the phone and turned on WiFi but now I don't get the notification for the new OTA Update anymore and when checking for new Updates it says that my OOS 11.0.11.11 is up to date.
I guess the system has somewhere already stored that I started the download of the new 11.0.12.12 OTA but did not finish it and now I don't get the message to download it anymore.
Any idea how I can fix this so that I can download the new OTA again?
Thanks a lot!
EDIT: I am downloading it now via OxygenOS Updater (the full OTA).
BillGoss said:
See post #3 in https://forum.xda-developers.com/t/...recovery-project-8t-kebab-2021-29-11.4302449/
Click to expand...
Click to collapse
I understand that if I want to restore system and data when something doesn't work for me then I just do recovery for all the partitions, system, data etc that I do in twrp?
Please see the update in the OP regarding OOS 12.