Database Users

AVIN and Radio not working after update MCU Help please

Hi
I've update the MCU and after that I got 2 problems:
1) Radio not working at all ( try to change setting from Factory Settings and still not working).
2) AVIN ( the front camera ) it's work sometimes BUT mostly not working.
I've tried the following:
1) Go throw the settings and Factory settings make settings like original.
2) GO throw settings and Factory settings and try everything.
3) Change the MCU version ( until now I tried 8 files).
4) Flash the MCU and Flash the Rome ( also Conversely).
* I have chose the MCU file carefully based on the HU that I have.
Here is the link of the MCU that match the one that I have:
KLD MCU
Head Unit
Here is my ORIGINAL head unit info ( BEFORE UPDATES ):
MCU Version: MTCB-KLD1-V2.55
Android Version: 4.4.4_28052015
Kernel Version: 3.0.36+ [email protected] #262
Build Number: rk3188-eng4.4.4 28052015
I tried to search in this section looking for any solution but I got no luck
thanks

Same thing happened to me last night. Any solutions out there? My head unit is an Eonon GA5150F and I installed Mayalsks August ROM and the latest KLD mcu

rooot_999 said:
* I have chose the MCU file carefully based on the HU that I have.
Here is the link of the MCU that match the one that I have:
KLD MCU
Click to expand...
Click to collapse
Except that link points to 21 folders with MCU files in them. MOST of them are KLD, only a few are KLD1, which is what you have. Did you try the KLD1 MCU? And why are you shouting?

Well I tried KLD1, and it's the same.
I think we need the stock one.
By the way I figured how to run AVIN, you can do it through the steering wheel buttons(Mode) , this method works always, but still we need to run it through the screen.
For the radio issue I couldn't solve it until now.
I think we need to ask Eonon company to gives us the stock files.
Sent from my C6602 using XDA Free mobile app

Hello,
I have a problem with the radio too. I cant autosearch on the radio. If I put the frequency manually it works. But autosearch doesnt. Any idea? Trying to change in factory settings the type of radio but no change.
I have KDL2 v.267 from the factory, not done any update by me.

vlad_pelinescu said:
Hello,
I have a problem with the radio too. I cant autosearch on the radio. If I put the frequency manually it works. But autosearch doesnt. Any idea? Trying to change in factory settings the type of radio but no change.
I have KDL2 v.267 from the factory, not done any update by me.
Click to expand...
Click to collapse
Hi, this problem happened after update wrong MCU

Thanks for your answer. My MCU was never updated. So probably they (chinese) did it at the factory and put a bad MCU update? So you think i should downgrade to an older version. (kdl2 v2.67 is the newest version). I will try with KDL2 v2.55 an see if it works.

Sry for another of my post. I've tried a downgrade to kDL2 v2.55.Same problem. I've tried KDL 2.64. Same problem. But everything works on KDL and on KDL2 mcu update. Just the radio is not working.

vlad_pelinescu said:
Sry for another of my post. I've tried a downgrade to kDL2 v2.55.Same problem. I've tried KDL 2.64. Same problem. But everything works on KDL and on KDL2 mcu update. Just the radio is not working.
Click to expand...
Click to collapse
Ever get your radio working ?

chgogolfpro said:
Ever get your radio working ?
Click to expand...
Click to collapse
Yep. With the Mayalsks rom it works like charm. After installing Maya's ROM the radio start working.

radio fix
vlad_pelinescu said:
Yep. With the Mayalsks rom it works like charm. After installing Maya's ROM the radio start working.
Click to expand...
Click to collapse
I had this same problem. Reloaded the factor rom setting so i was back to the way it was when i bought it and still no radio. turns out it was a setting under factory settings. my pin to get abscesses was 121212 not 126 like the manual said. i had to select TDA7786 and do a factory reset and it worked fine. i have a pic but not sure how to add it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Sorry for bumping this but I really don't know what to do.
I have a MTCD XRC which have worked somewhat well but now the radio is totally dead. I can't auto search channels, there is no radio noice or nothing. Audio works otherwise but the radio is totally gone.
I tried to do a factory reset, no change.
I went to factory settings to see what radio was selected like the photo above but I only have "YES" and "NO" to select, nothing else!
Anybody? Please?
Edit: It just died while listening to the radio in the middle of a song, it just went quiet and I have not been able to get it working again after that :/

Have you tried to upgrade the MCU?
also which room are you using? Is it stock?

rooot_999 said:
Have you tried to upgrade the MCU?
also which room are you using? Is it stock?
Click to expand...
Click to collapse
Yes I upgraded to the latest MCU for my model (XRC) and installed Maylask latest rom then the radio just went quiet and auto search not working. I then tried to change back both rom and MCU to stock, but still not working
I tried the above in factory settings but the only options I have under radio is "YES" and "NO". I can not select radio chip

I have the same issue. The 121212 (and m123456) codes work for getting to "factory settings" but on the Radio menu there's just YES/NO and no way to select a tuner chip. Anyone have any ideas? This is on a PX3 2GB Android 7.1.2 headunit.
Update: Switched to the Mayalsks ROM but that didn't help. I was hoping I would get to choose a radio module but it is still just YES/NO.

nirudha said:
I have the same issue. The 121212 (and m123456) codes work for getting to "factory settings" but on the Radio menu there's just YES/NO and no way to select a tuner chip. Anyone have any ideas? This is on a PX3 2GB Android 7.1.2 headunit.
Update: Switched to the Mayalsks ROM but that didn't help. I was hoping I would get to choose a radio module but it is still just YES/NO.
Click to expand...
Click to collapse
Any update on that one??

Need help with chinese android head unit

I purchased a chinese head unit the other day with the Allwinner R16 A9 Cortex single din head unit currently I cant post links but I will add one later or pictures the best I can I have the model number
Hizpo
AD601UN7001
Not paying attention I downloaded and flashed the wrong file i thought I chose single din file but instead got the file for double din radio an now my screen shows nothing bu lines through it although everything else works fine radio and music apps i just cant see the screen or what I am selecting I have been looking for the stock/original flash files for this radio without any luck hoping i can recover it with a bootable disk option of some sort to reflash it any help would be much appreciated currently stuck with a very expensive brick

I believe 2din vs 1din does not make any difference in terms of ROM version, screen resolution does. Is there a chance you've downloaded wrong resolution ROM? If so, just download yours and reflash.

ste2002 said:
I believe 2din vs 1din does not make any difference in terms of ROM version, screen resolution does. Is there a chance you've downloaded wrong resolution ROM? If so, just download yours and reflash.
Click to expand...
Click to collapse
Long story short the file i ended up flashing i got off the russian forums because thats the only place i could find files for my specific unit but i didn't read the small print at the bottom that had files linked somewhere else and i wasnt suppose to do a certain update because it makes the screen stop working an I was originally trying to fix the battery threshold level to keep unit from restarting from acc to on position it took the update fine just when it restarted the unit the screen hasnt worked since so I've been trying to find a way to either make a auto update recovery disk of some sort or connect a pc to it through adb or something an anither thing to note is i have no back up or anything of my unit an its been a pain trying to find one i messaged the original seller to see if they could help me out an send me the stock files
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The information on the unit comes back as a Allwinner T3-P3 single din 7 inch touch screen unit with android 6.0 R 16 A9 cortex processor the manufacturer goes by Hizpo

JBT1061 said:
I purchased a chinese head unit the other day with the Allwinner R16 A9 Cortex single din head unit currently I cant post links but I will add one later or pictures the best I can I have the model number
Hizpo
AD601UN7001
Not paying attention I downloaded and flashed the wrong file i thought I chose single din file but instead got the file for double din radio an now my screen shows nothing bu lines through it although everything else works fine radio and music apps i just cant see the screen or what I am selecting I have been looking for the stock/original flash files for this radio without any luck hoping i can recover it with a bootable disk option of some sort to reflash it any help would be much appreciated currently stuck with a very expensive brick
Click to expand...
Click to collapse
Do you have it figured out? I have the same unit and I´m struggling with bluetooth issues.

fstuff138 said:
Do you have it figured out? I have the same unit and I´m struggling with bluetooth issues.
Click to expand...
Click to collapse
No, but I still have the unit and to be honest they sent me another one and it still work i suppose i got break it out and get my tools out and dive in getting my hands dirty and try to extract the firmware file myself from the unit

Funrover ZQ8003, bad sound quality, is root possible?

Hi,
I recently bought an android radio for Mitsubishi Outlander II and it doesn't play very well.
Maybe i can root this headunit for viper4android or something else like custom rom for better quality?
Information about this headunit:
Device name: ZQ8003
Android:20190708 / 9
MCU:M320L0_ZIQI-PUBLIC-W-S16_20190801_HB1_6686_N_IF_8A
APP:MTK-8003-90_C52_HA1_RH-EN_2019-07-08-1122
Custom build version: alps-mp-p0.mp2-V3.44
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for help.

Nobody can help me? It is not possible to do root?

RR

Hi, I got this HU recently, and I can't get any sound from my speakers, but I can hear beeps when I touch the screen. Did you face this problem before?

Hello, i have this model too.
Android 20190727
MCU: M32L0_ZIQI-PUBLIC-W-S16_20190617_HB1_6686_N_IF_9A
APP MTK-8003-90_01_HA1_PUBLIC-EN_2019-08-05-1915
The sound work well, the device isn't rooted , but oem booloader is unlock.

CPU is a mediatek MT8321 / MTK8321 : www _dot_ mediatek.com/products/tablets/mt8321
To root, try androidmtk.com/download-mtk-droid-tool.
The factory menu and reboot to recovery code is 0000 for my device.

but how i can root with this program without micro usb input?

Hi Xerionek, i think we can use the host usb port type A, but you must have a good wire, i tried with wire type A - type C ( computer) but nothing
we can find some update here : http://4pda.ru/forum/index.php?showtopic=883219&st=6320#entry71924293
i didn't try it

Same Unit
I‘ve got the same Unit and become a Update file seems to be better then before...
But root Not possible with male to Male usb cabel
Notebook dont find a connection
Android driver installed but nothing

balkanera said:
I‘ve got the same Unit and become a Update file seems to be better then before...
But root Not possible with male to Male usb cabel
Notebook dont find a connection
Android driver installed but nothing
Click to expand...
Click to collapse
how you updated the soft?
zip file for sd card and for radio,
zipped up? 3x reset before uploading?

Settings and Last one android Upgrade. So Head Unit reboot to recovery and there I choose the zip. No 1x time wipe and factory reset before thats it
Zip file on usb
fs.163.com/fs/display/?p=X-NETEASE-HUGE-ATTACHMENT&file=f_8GVo9s3je6d7px4a7pnUs5rFiWdElGxMSIyqTM2BgZx6fl93KhF5N4ps2qEk6eB7y81tQDemHZZjss0NQy5A&title=Android%2010%20upgrade%20file

I bought this 6 months ago. First month usage then the sound is gone. Send back to the local seller in Malaysia. After the repair my unit have the sound but it gone crazy by random frequent reboot. When I asked for the firmware from the seller he simply refuse to give me. I really like this unit with android 9 and the built-in 4G capability. Tried looking for the stock firmware or any root or mod for it but with no avail. Any help would be really appreciated.

http://fs.163.com/fs/display/?p=X-N...DemHZZjss0NQy5A&title=Android 10 upgrade file
---------- Post added at 10:15 AM ---------- Previous post was at 10:14 AM ----------
Try this is the newest firmware.. but wipe first and factory reset in recovery

Do you have the exact same model mate? The latest firmware is base on android 9 or 10? The latest fw is stable enough and can eliminate the random reboot I faced? Thanks for sharing mate. Luv u.

Yes same head unit ...
Before I had the same mcu and software like you
It says Android 10 like the firmware you have now...
But it’s fake it’s Android 9 look at api Level ..
New firmware also says android 10 but same api level like before.
But better perfomance and sound since this update
alps-mp-p0.mp2-V3.110
Manufactur: alps
Hardware: mt8321
Board: zq_mtk_8003
Android: 20200416
Mcu: M32L0_XinRC-W-S16_20191129_HB1_6686-9216M_IF_8A

Ok tq mate. Where are you from btw?
This chipset have 3G capability only right? Because the sim signal icon on my unit sometimes shows 4G.
Downloading the firmware now but failed once. The speed is around 50-200kbps but always at the lowest speed that is below 100kbps....phew.

Yes really slow server. It’s from seller
I don’t use a simcard so I don’t know.
Only wifi from iPhone automatic connect every drive and google maps offline

I also had a problem with the random restart of the radio. After the update I got from the seller, the radio stopped working
I will try to upload a soft link from a friend, maybe it will be better

After update remove usb stick to reboot normally

balkanera said:
http://fs.163.com/fs/display/?p=X-N...DemHZZjss0NQy5A&title=Android 10 upgrade file
---------- Post added at 10:15 AM ---------- Previous post was at 10:14 AM ----------
Try this is the newest firmware.. but wipe first and factory reset in recovery
Click to expand...
Click to collapse
rafalk24 said:
I also had a problem with the random restart of the radio. After the update I got from the seller, the radio stopped working
I will try to upload a soft link from a friend, maybe it will be better
Click to expand...
Click to collapse
Are you updating with the firmware given by balkanera? Are you sure it is not working? I just finished download the fw that I left downloaded overnight. I feel unsure to update the fw now....gosh.
What do think @Balkarena?

Allwinner quad-core t3 k2001-nwd

Hi Everyone
Recently purchased a unit with the below specs:
APPVER: K2001N_NWD_S212701.20191226.212334.01
PlatformVER: K20N-2019/12/26
MCUVER: V3.0-FF01-20190909-A02-CAN0000-00-00-DVD0000000000-00
BTVER: GOC_XR829_4.0/2019/10/24
CANAPPVER: v19.12.23A
CANBOXVER: raise
I have 2 questions:
1. Where can I find firmware for this unit?
2. The "factory settings" menu seems to have an issue on "Gain Settings". I make changes to the gain on the ports but when it reboots it goes back to 0.
Any help would be appreciated.
Thanks

jitenm said:
Hi Everyone
Recently purchased a unit with the below specs:
APPVER: K2001N_NWD_S212701.20191226.212334.01
PlatformVER: K20N-2019/12/26
MCUVER: V3.0-FF01-20190909-A02-CAN0000-00-00-DVD0000000000-00
BTVER: GOC_XR829_4.0/2019/10/24
CANAPPVER: v19.12.23A
CANBOXVER: raise
I have 2 questions:
1. Where can I find firmware for this unit?
2. The "factory settings" menu seems to have an issue on "Gain Settings". I make changes to the gain on the ports but when it reboots it goes back to 0.
Any help would be appreciated.
Thanks
Click to expand...
Click to collapse
Could you detail brand and model and attach a photo of the unit?

ultradj83 said:
Could you detail brand and model and attach a photo of the unit?
Click to expand...
Click to collapse
Hi
I cannot post a link to the website yet but here are the specs on the site. It does not have a brand name on it.
From bidborbuy.co.za
VW 7" Android 8.1 Touch Screen Car Radio For VW Multimedia Player with GPS Navigation Bluetooth USB
Specifications:
Model: VW Player
Decoding Chip: MTK 8227L
Cpu: A7 1.3GHZx4
Size:7 Inch
Memory 1G Storage 16G
FM Radio:87.5~108MHz
Voltage:12V
Bluetooth: Bluetooth 4.0
USB: USB2.0
Audio Amplifier: TDA7388

Hardware is really similar to my unit, both based on 8227L and TDA7388.
I can send the firmware I'm running to you, but no idea if it will run, it might brick your unit.
It works quite fine, but there's 2 problems:
1. Sometimes GPS is slow to fix.
2. On incoming calls it takes up to 10 seconds to start incoming voice, while outgoing voice starts immediately.

ultradj83 said:
Hardware is really similar to my unit, both based on 8227L and TDA7388.
I can send the firmware I'm running to you, but no idea if it will run, it might brick your unit.
It works quite fine, but there's 2 problems:
1. Sometimes GPS is slow to fix.
2. On incoming calls it takes up to 10 seconds to start incoming voice, while outgoing voice starts immediately.
Click to expand...
Click to collapse
Please send me the link, I was not concentrating and loaded a Russian version this afternoon :laugh:
Trying to find the original version but not winning, I would appreciate the link.
Thanks!

jitenm said:
Please send me the link, I was not concentrating and loaded a Russian version this afternoon :laugh:
Trying to find the original version but not winning, I would appreciate the link.
Thanks!
Click to expand...
Click to collapse
Here it is: https://we.tl/t-VvRCthiTed
Mind that you may brick your unit: normally there should be a CRC and model check before flash begins, but talking about chinese stuff nothing is safe...

ultradj83 said:
Hardware is really similar to my unit, both based on 8227L and TDA7388.
I can send the firmware I'm running to you, but no idea if it will run, it might brick your unit.
It works quite fine, but there's 2 problems:
1. Sometimes GPS is slow to fix.
2. On incoming calls it takes up to 10 seconds to start incoming voice, while outgoing voice starts immediately.
Click to expand...
Click to collapse
ultradj83 said:
Here it is: https://we.tl/t-VvRCthiTed
Mind that you may brick your unit: normally there should be a CRC and model check before flash begins, but talking about chinese stuff nothing is safe...
Click to expand...
Click to collapse
Thanks! Will give this a try
I have a backup unit to install if i break this one so I will play around

Not MTCB.... Requesting Mod move

DIdn't work unfortunately.
I will need to find the chinese original k2001n_nwd firmware for this to get back to normal :laugh:
Will do some digging

Hi again
Managed to source the correct firmware from the russian forums.
The only issue I have is that the gain settings revert back to 0 when saving the config. I am trying to increase the bluetooth/usb volumes but it does not save the changes.
Anyone have a fix for this?

ultradj83 said:
Here it is: https://we.tl/t-VvRCthiTed
Mind that you may brick your unit: normally there should be a CRC and model check before flash begins, but talking about chinese stuff nothing is safe...
Click to expand...
Click to collapse
I can't acces to the link

Alessolabestia said:
I can't acces to the link
Click to expand...
Click to collapse
ultradj83 said:
Here it is: https://we.tl/t-VvRCthiTed
Mind that you may brick your unit: normally there should be a CRC and model check before flash begins, but talking about chinese stuff nothing is safe...
Click to expand...
Click to collapse
Can give again the link for i try whit mine
Thanks

Dear,
as a long time has passed I don't remember exactly what file I shared through that link...
What's your modem (a pic might be useful)?
What's your problem?

i brick my unit and i need image for allwinner t3 k2001 i thinks is ( t3-p2 )

ultradj83 said:
Dear,
as a long time has passed I don't remember exactly what file I shared through that link...
What's your modem (a pic might be useful)?
What's your problem?
Click to expand...
Click to collapse
i brick my unit and i need image for allwinner t3 k2001 i thinks is ( t3-p2 )

copas15 said:
i brick my unit and i need image for allwinner t3 k2001 i thinks is ( t3-p2 )
Click to expand...
Click to collapse
Please send a picture and model specs as I'm not sure what mirror you have...

Greshare GS18950 DMSM5BE Android 8.1 DVR Mirror firmware, tools and bugs list
Hello there. This is the DMSM5BE: DMSM5BE_116_Media_Sleep_2020120715 firmware and tools attached. Known bugs: Wi-Fi off after reboot Bluetooth off after reboot CarKeeper app video streaming not working Park Monitor not working Awful UI...
forum.xda-developers.com

I need miudrive screen please

Hello , I also purchased the same.. with 1Gb ram. Is there any way to increase the RAM externally? I mean like using a class 10 memory card? Maybe its a dumb idea as I'm not a techie. I wanted to increase the RAm because Waze is not fluid smooth in the device. Thanks in advance

請問usb讀不到，要如何處理，謝謝！！
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

AC8227L Android head unit 2gb/32gb

AC8227L Android head unit 2gb/32gb
Sound Processor TM2313
MCU version jcnu20-0-2022.04.21_09:45
Panel Info MIPI_1024x600-2021/7/7 21:10:55
System Version: JCAC10003-OC2-V1.0.20R2-220509_1437-AA
What can i change on this system of mine, any upgrades supported on this unit??

Cruizertz said:
AC8227L Android head unit 2gb/32gb
Sound Processor TM2313
MCU version jcnu20-0-2022.04.21_09:45
Panel Info MIPI_1024x600-2021/7/7 21:10:55
System Version: JCAC10003-OC2-V1.0.20R2-220509_1437-AA
What can i change on this system of mine, any upgrades supported on this unit??
Click to expand...
Click to collapse
Hello Cruizertz, I have the same device but 1g/16g
In the radio app can you save the stations and not delete them when you turn on the device again? This happened to me when the seller sent me a firmware to solve another problem and now it doesn't give me a solution and I don't know how to get everything right again since I didn't make a backup copy.

fraldide said:
Hello Cruizertz, I have the same device but 1g/16g
In the radio app can you save the stations and not delete them when you turn on the device again? This happened to me when the seller sent me a firmware to solve another problem and now it doesn't give me a solution and I don't know how to get everything right again since I didn't make a backup copy.
Click to expand...
Click to collapse
Do you need the last update yet?

Hello Cruizertz,
yes a need!! where can i get it?

fraldide said:
Hello Cruizertz,
yes a need!! where can i get it?
Click to expand...
Click to collapse
I think you ask to me for update and not to Cruizertz, really?

Sorry I got the name wrong!! if it's you

Яндекс
Найдётся всё
disk.yandex.ru
First unzip the folder, and just copy the Update folder (inside there are more folders, don't touch). Second, put the Update folder on a flash drive and insert it into the USB² (you have two USB ports on the headunit, must be with the number USB².
Third: the system asks you if you want to update, you must give OK or wait 5 seconds. The copy of the files will begin, do not touch anything, and you will see how the lights blink
Fourth: do not touch anything, when the update is done the unit will turn off, and when it turns on again the lights will continue to flash, and after about 30 to 60 seconds it will start updating again. Never remove the flash drive or touch anything until the message appears at the bottom indicating that the update has finished.
When you're done, tap ok. Everything has been deleted from the headunit, and you must reinstall everything you had before.
Important: if you had the Apps from a vendor, such as Podofo or Jancar, they are deleted. If you had any map App too, but if you need Here Maps tell me.

If you are not sure what I explain, if you can wait, maybe 3 hours, I can do a video to show you

meidland said:
If you are not sure what I explain, if you can wait, maybe 3 hours, I can do a video to show you
Click to expand...
Click to collapse
Perfecto meidland, I think it's pretty clear what the process is like. I don't think I can try it today, but tomorrow I will. thanks. I'll tell you when I do.

fraldide said:
Perfecto meidland, I think it's pretty clear what the process is like. I don't think I can try it today, but tomorrow I will. thanks. I'll tell you when I do.
Click to expand...
Click to collapse
It's very easy, you will see. I forgot to tell you that is the last update at the moment, from 14.10.2022 or 10.14.2022 in English, I think

Thank you very much for your help meidland. I was able to search for a moment and have installed it and everything is working perfectly. It has corrected a problem that I had with the radio app, after a firmware that the seller had sent me to correct something else and then did not want to know anything. That's why I thank you, for helping me.

Greetings
Meidland please do a video to show the update process

meidland said:
Яндекс
Найдётся всё
disk.yandex.ru
First unzip the folder, and just copy the Update folder (inside there are more folders, don't touch). Second, put the Update folder on a flash drive and insert it into the USB² (you have two USB ports on the headunit, must be with the number USB².
Third: the system asks you if you want to update, you must give OK or wait 5 seconds. The copy of the files will begin, do not touch anything, and you will see how the lights blink
Fourth: do not touch anything, when the update is done the unit will turn off, and when it turns on again the lights will continue to flash, and after about 30 to 60 seconds it will start updating again. Never remove the flash drive or touch anything until the message appears at the bottom indicating that the update has finished.
When you're done, tap ok. Everything has been deleted from the headunit, and you must reinstall everything you had before.
Important: if you had the Apps from a vendor, such as Podofo or Jancar, they are deleted. If you had any map App too, but if you need Here Maps tell me.
Click to expand...
Click to collapse
Please link not work ...

Hi, after I update with the update from 10/14/22 was not a good update and I report to Factory and the said is better the update from 07/08/22 , I tried and is the best at the moment.
Link here
Firmware11-1024x600-220708-1241AutoUpdate.zip
drive.google.com

meidland said:
Hi, after I update with the update from 10/14/22 was not a good update and I report to Factory and the said is better the update from 07/08/22 , I tried and is the best at the moment.
Link here
Firmware11-1024x600-220708-1241AutoUpdate.zip
drive.google.com
Click to expand...
Click to collapse
the official Podofo seller I bought the head unit from, sent me this link to my own 2gb/32gb unit... i'll try next day
Яндекс
Найдётся всё
disk.yandex.ru

I click on restore factory settings, and now, the radio is starting ... And not work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

isbsalgado88 said:
I click on restore factory settings, and now, the radio is starting ... And not work.
Click to expand...
Click to collapse

RonaldoRisso said:
the official Podofo seller I bought the head unit from, sent me this link to my own 2gb/32gb unit... i'll try next day
Яндекс
Найдётся всё
disk.yandex.ru
Click to expand...
Click to collapse
Update is ok, thanks so much

Cruizertz said:
AC8227L Android head unit 2gb/32gb
Sound Processor TM2313
MCU version jcnu20-0-2022.04.21_09:45
Panel Info MIPI_1024x600-2021/7/7 21:10:55
System Version: JCAC10003-OC2-V1.0.20R2-220509_1437-AA
What can i change on this system of mine, any upgrades supported on this unit??
Click to expand...
Click to collapse
can i install yt9213 or yt9216?

Cruizertz said:
AC8227L Android head unit 2gb/32gb
Sound Processor TM2313
MCU version jcnu20-0-2022.04.21_09:45
Panel Info MIPI_1024x600-2021/7/7 21:10:55
System Version: JCAC10003-OC2-V1.0.20R2-220509_1437-AA
Click to expand...
Click to collapse
I have the same unit 1gb 16gb my firmware has corrupted. Kindly help post a link where i can download and reinstall?