SMS Notification mirroring and other questions re: A-Sure S3OVB Android HU - Android Head-Units

Hi All,
I recently treat myself to an A-Sure AS-S3OVB (Running android 5.1.1) headunit for my UK Spec Vauxhall Zafira. I am very impressed with the unit and making a few tweaks has made it into a very impressive piece of kit. I don't know if its MTCB or MTCD or even anything to do with those two things, so Im afraid I can't reliably post inside another sub-forum.
However, I now have a few final things that I would like to TRY to make the unit do...
1...
I want my Notifications from my phone (Not ALL notifications, just ones from SMS to appear on the HeadUnit (BIG CENTRAL SCREEN notification would be ideal) and perhaps read the message with TTS?
Is this possible, and does there exist any software to make this happen?
Essentially, i want my HeadUnit to do all the things it normally does, but also behave in a similar fashion to a smart watch for mirroring notifications.
I have looked at things like PUSHBULLET and the such but have had little success...
2...
I would like to set one of my steering wheel control buttons to fire up google voice search, so as I can tap a button and then say "Play <generic song name> on spotify" - and thus said song will play.
Is its possible using the onboard software, or with a 3rd party app?
3...
I would like to change what the external display says when i am using certain apps (its done through an external CANBUS box but I believe controlled by the software in the HU). For example, at the moment when I am running spotify, my external in car display shows "MP5" - Would be much prettier if i could make it say "Spotify" or "Streaming" or something similar.
Is this possible at all?
4...
Finally, is there any way to get Google TTS to work with my mapping sortware? I use Co-Pilot Live which works 100% in every other way, just it doesnt work output and voice instructions when set to Google TTS. I have a feeling this is more to do with thge funky version of android thats installed as standard on the HU, less so than co-pilot itself.
Can anyone advise? Thanks in advance - I know someone will have an answer as this is seemingly the greatest forum on the whole of the interwebs!!!

tegan1110 said:
Hi All,
I recently treat myself to an A-Sure AS-S3OVB (Running android 5.1.1) headunit for my UK Spec Vauxhall Zafira. I am very impressed with the unit and making a few tweaks has made it into a very impressive piece of kit. I don't know if its MTCB or MTCD or even anything to do with those two things, so Im afraid I can't reliably post inside another sub-forum.
However, I now have a few final things that I would like to TRY to make the unit do...
1...
I want my Notifications from my phone (Not ALL notifications, just ones from SMS to appear on the HeadUnit (BIG CENTRAL SCREEN notification would be ideal) and perhaps read the message with TTS?
Is this possible, and does there exist any software to make this happen?
Essentially, i want my HeadUnit to do all the things it normally does, but also behave in a similar fashion to a smart watch for mirroring notifications.
I have looked at things like PUSHBULLET and the such but have had little success...
2...
I would like to set one of my steering wheel control buttons to fire up google voice search, so as I can tap a button and then say "Play <generic song name> on spotify" - and thus said song will play.
Is its possible using the onboard software, or with a 3rd party app?
3...
I would like to change what the external display says when i am using certain apps (its done through an external CANBUS box but I believe controlled by the software in the HU). For example, at the moment when I am running spotify, my external in car display shows "MP5" - Would be much prettier if i could make it say "Spotify" or "Streaming" or something similar.
Is this possible at all?
4...
Finally, is there any way to get Google TTS to work with my mapping sortware? I use Co-Pilot Live which works 100% in every other way, just it doesnt work output and voice instructions when set to Google TTS. I have a feeling this is more to do with thge funky version of android thats installed as standard on the HU, less so than co-pilot itself.
Can anyone advise? Thanks in advance - I know someone will have an answer as this is seemingly the greatest forum on the whole of the interwebs!!!
Click to expand...
Click to collapse
1) try automate or Android auto to bring your phone notifications onto headunit
2) enable "ok Google" on every screen
3) not easy. you have to decompile the app used by mcu and modify it.
4) I don't know if copilot could use Google tts voices (or you have to install own copilot advanced voices). Sygic can use Google tts
Enviado desde mi D6603 mediante Tapatalk

ikerg said:
1) try automate or Android auto to bring your phone notifications onto headunit
2) enable "ok Google" on every screen
3) not easy. you have to decompile the app used by mcu and modify it.
4) I don't know if copilot could use Google tts voices (or you have to install own copilot advanced voices). Sygic can use Google tts
Enviado desde mi D6603 mediante Tapatalk
Click to expand...
Click to collapse
Thanks for quick reply,
1) I dont use Android Auto, can it be used via Bluetooth, or Wifi, or does it HAVE to be connected by USB cable?
2) I dont have the options to enable "ok Google" on every screen, I know the options SHOULD be there, and I know where they should be... But they are absent!
3) Sounds like a challenge for a project in the future
4) Copilot can use Google TTS as it works just like that on my phone - it just behaves a little differently on the HU, which is why I was wondering if they had left some part of the TTS system out of their build of android or something?
Jamie

tegan1110 said:
Thanks for quick reply,
1) I dont use Android Auto, can it be used via Bluetooth, or Wifi, or does it HAVE to be connected by USB cable?
2) I dont have the options to enable "ok Google" on every screen, I know the options SHOULD be there, and I know where they should be... But they are absent!
3) Sounds like a challenge for a project in the future
4) Copilot can use Google TTS as it works just like that on my phone - it just behaves a little differently on the HU, which is why I was wondering if they had left some part of the TTS system out of their build of android or something?
Jamie
Click to expand...
Click to collapse
1) Android auto can be used by wifi
2) Google now works for me.in my unit. The developer should have to remove it.
3) yes
4) strange thing. Have you tried the Google tts if is installed and working?
Enviado desde mi D6603 mediante Tapatalk

Related

Top/Must apps for car head units

Hello everyone,
Lets start a new post, that will help each other to get familiar with new/top/best/must apps for android head units. :good:
I think it would be best if we stick to "TOP-10" per post...or maybe TOP per category (Navigation, music, etc etc...)
and thats because we can easily get dragged to top-30 top-50 , and that will be extremely confusing.. :angel:
Requirements - The apps must be fully/mostly compatible with android head-units.
Doesn't matter if they are free or not.
Thanks!
Tasker
Tasker
what special settings/conditions did you define in tasker?
Might have some good tips for us
I got poweramp installed to replace the stock music app. I used HeadUnit to forward steering wheel next/forward buttons to poweramp. It works great so far. Next, i want to configure poweramp to start playing automatically when the unit boots up. I have tried a few things, but not refine yet.
Lastly, i want to change the steering wheel "Mode" button to cycle between Music and Nav apps only, but have not figured out a way to it in exposedMTC app yet. The factory configuration for "Mode" button is to cycle through Radio, Music, Video, DVD, Nav, Avin, etc... too many of whcih that I don't want to cycle through.
AutoMate seems like it be a good fit
I'm a new guy here on XDA, but it seems like Torque (Pro) is an absolute must have.
Wouldn't it be nice to list all the given apps in the first post?
jordanow said:
Wouldn't it be nice to list all the given apps in the first post?
Click to expand...
Click to collapse
I think that's up to the OP to go back and edit the post as more replies come in.
Here goes my list: (or at least the one I´ve installed)
- Waze: Absolute must to avoid traffic
- Spotify
- Torque
What navigation apps are people using? I like Google Maps and Waze but I want an offline option for when data connection is not availabe. I'm thinking of using TomTom Go but is there anything better?
I also plan on using spotify, poweramp and torque.
Waze to beat traffic here in LA
Spotify always on
Sent from my LG-H811 using XDA Free mobile app
For Navigation i like the Navigon App. But under 4.4.4 it is not so good running in My Car Unit. I also search for a Offlinemap Solution. The Lady Talk Not every time.
Gesendet von iPhone mit Tapatalk
I use Poweramp, Torque, and then Sygic for GPS navigation (Here also seems to work alright)
I use always:
Torque with Speedometer
Icoyote in Europe
Google Play music
GPS
I use Gaia GPS for offline offroad TOPO maps since this is installed in my truck.
Does anyone have a good app solution to manage 10-20GB of music that is plugged into the external USB port on a 1TB portable HD?
I can get a file manager to see the music files / playlists, but I can't get a music program to see the music/playlist files so that I can easily listen to the music. Any advice?
I use Folder Player Pro for my music, I have a folder for each artist with sub folders for albums, lacks media graphics if you like that sort of distraction whilst driving but functionally great.
For navigation I like iGO Primo because I can save locations from Google Earth to Dropbox and my HU syncs with these as custom POIs in iGO Primo using Dropsync, you can also install custom skins on iGO Primo for increased functionality.
Also uses offline maps
I know some people really like PowerAmp, but I found that I like MediaMonkey for music better. I have about 30GB on the SD Card and it works great. Has good widget to put on the screen as well. In MediaMonkey you can go in the settings and tell it exactly what folders and path's to search for music and it will search and index all the files.
nixfu said:
I know some people really like PowerAmp, but I found that I like MediaMonkey for music better. I have about 30GB on the SD Card and it works great. Has good widget to put on the screen as well. In MediaMonkey you can go in the settings and tell it exactly what folders and path's to search for music and it will search and index all the files.
Click to expand...
Click to collapse
poweramp does all that tasks
For offline GPS navigation, HERE maps from Nokia works fine ! You can download maps by country or part of country if you want. Then you switch to "offline" navigation and it uses only stored maps. He got traffic info but i prefer Waze when online is up
es file explorer to move files is a fine tool too.
I wanted to do the exact same thing on my Joying RK3188 unit, Highlander version. After much trial and error found out that there is a bug in XposedMTC that prevents it from switching to Navi if video is not set right (crashes after 2-3 swaps). So I disabled all options in XposedMTC, so clicking on Mode hard button will start the music app (Poweramp in my case). I used the hard Navi button to switch to Navigation and "Phone Down" button for "Back Screen" option. This combo seems to be working quite well over the last week or so I have been using. Another key thing is that when you change any option in XposedMTC, close this and start XposedInstaller > Framework > Install. This will require a device reboot and the settings seem to reflect in mine only after this is done.
qtpie70 said:
I got poweramp installed to replace the stock music app. I used HeadUnit to forward steering wheel next/forward buttons to poweramp. It works great so far. Next, i want to configure poweramp to start playing automatically when the unit boots up. I have tried a few things, but not refine yet.
Lastly, i want to change the steering wheel "Mode" button to cycle between Music and Nav apps only, but have not figured out a way to it in exposedMTC app yet. The factory configuration for "Mode" button is to cycle through Radio, Music, Video, DVD, Nav, Avin, etc... too many of whcih that I don't want to cycle through.
Click to expand...
Click to collapse
The best App Ever is Auto dashdroid for Android
https://play.google.com/store/apps/details?id=com.nezdroid.cardashdroid

UnIdentified Headunit

Hey everybody,
I've got an unidentified android headunit installed in my car,
I've been trying to figure out what brand it is ,and if possible i'll update to Kitkat.
Up until now, it seems to look like Icartech s730, but there are few differences between them.
I've searched on the internet few like the MCU version and the kernel version, but I've got nothing out of it.
here are the details:
Uboot version v00.01.13
Kernel version V24.02.25 20140930
OS version Android-4.1.1 V1.01.75
MCU Version V0.60B
I've also attached a photo, there are 4 soft keys (eject, back, home and volume), and a USB port underneath them.
Thanks
have the same
Hello
i have the same head unit & its Symphony SYD-70 BTWi
but as you said it has nothing on the internet related
& the icartech is the one that looks exactly like it with the look difference only
and i bought it from Egypt
I can not find anything on line about that system
where I bought it they say that it is called "TARGET U-1001" (some call it "i-1001" or "android i-1001)
got it as "closed system"- can't install apps. google play is not shown on screen
when I open the browser on this device and going t google play, it starts downloading apps but refuses to install.
does any one know how to hack it so it will be more useful ?
please contact me : [email protected]
thanks
D.
duduyyy said:
I can not find anything on line about that system
where I bought it they say that it is called "TARGET U-1001" (some call it "i-1001" or "android i-1001)
got it as "closed system"- can't install apps. google play is not shown on screen
when I open the browser on this device and going t google play, it starts downloading apps but refuses to install.
does any one know how to hack it so it will be more useful ?
please contact me : [email protected]
thanks
D.
Click to expand...
Click to collapse
I have the same unit, I did manage to access google play and install apps through it.
Does your steering wheel control work? Mine doesn't get anything from the controls, even when trying to re-assign them.
tklingr said:
I have the same unit, I did manage to access google play and install apps through it.
Does your steering wheel control work? Mine doesn't get anything from the controls, even when trying to re-assign them.
Click to expand...
Click to collapse
google play is working fine & i can install any apps i want
& the steering wheel function is supported but i don't have it in my car
the only problem is when you update google play service it get some problems so i uninstalled its updates
to get the unit to work fine
Can you please explain how you did it? I have managed to install google play services and google play, it's icon doesn't appear in launcher, I'm able to launch it in tricky way, when I try to install apps, it fails with error code 22.
any one have any updates for this device firmware

Looking for a headunit

Since i got a new/old car and i am not too happy with its radio right now I would like to exchange it and get an android device.
Actually right now I am a bit torn between an android unit and a pc. I know the pc is more expensive but as I read around the internet, right now it has the following advantages for me:
1. I can choose freely which hardware it has.
2. Bluetooth works fine.
3. It will support Windows 10 so i can use cortana - which will give me the option to use it more or less hands free.
4. I can use Kodi for Radio etc.
5. it might just run android as well
6. pretty much all apps are more or less available
7. with Kodi i can customize the look (in my opinion way beyond of what i could do with different launchers)
8. Kodi supports radio traffic service
Now that I have listed all the + Notes on the PC version here comes Android:
1. A lot cheaper!
2. Works out of the box.
3. I don't have to buy the apps again (as i have bought them already and use them on my phone)
4. Theoretically I can use Kodi (afaik "just" not for radio)
5. Afaik bigger community
BUT(!)
I was digging around and found following problems which i'd like to ask you guys if they are still an issue:
1.) So far no Android 6.... so no Google Voice for hands free
2.) Bluetooth is at best buggy (incomeing calls show no name from the phonebook just the number) other devices such as obd do not work or if they work only the ones from the manufacturer of the headunit will work. Bluetooth connectivity is limited to one device at a time.
3.) I am limited to the Apps from the manufacturer as far as radio goes. (i think most of the apps i have seen are ugly - i don't want to see the frequency of the station I am listening to... especially not as big as i have seen it.) DAB(+) Apps look somewhat ugly as well. There is no real chance to change that.
4.) there is no support for radio traffic service
5.) Customization is limited
My questions are:
1.) Is what I am saying still correct (for example the bluetooth issues).
2.) Does anyone know a work around for the Google Voice? Preferably without the need to press a button. Or has someone an Android 6 device and can confirm that Ok Google works fine there?
3.) Is it at all possible to implement the Radio(FM/DAB+) into Kodi on Android - has someone done this? Maybe even something like a navigation software? (yes - i am a kodi fanboy -actually more or less from day one - i had a old xbox - the first xbox running xbmc in my car with linux and a gps built in)
What I would like to have in the end would be a system where Kodi is loaded up as soon as the car starts.
Via Tasker (if possible) I would grab the infos from torque and implement them in a custom skin in kodi. I would love to listen to the radio via Kodi and if at all possible have navigation in there as well (but if that does not work I will find a workaround - i already have one in my head)
I know this is a lot and many of you might think tl;dr but if anyone could answer my questions anywhere I am convinced that it is here on the mighty xda board.
Thank you guys so much. (If I get this all to work I will of course post all of it here (skins, tasker skripts etc)
About Android vs Windows and head unit vs PC, I think you'll have to decide on that for yourself. Nobody here can tell you what's the right choice for you.
As for Kodi, I haven't dived into it much, but I have a more typical use of the head unit I guess. Google voice works in 5.1.1, but you need another launcher and you need to install the required apps from Google Play and enable everything. I have it working in mine, but decided to have it activate on a button press. I do have to switch between apps and stuff, and the BT caller app is a little quirky to use. I would've wanted something more inline with the default Google dialer, but no go on that one. Even if you install Contacts and the Google Phone app, they don't really do anything. If you want complete control over everything, then PC and Windows (or <insert OS her>) would be the best choice for you. If you want to save time and have something that is fairly easy and quick to set up out of the box, then a head unit with Android would be better.
Thx Hilari0 for your answer.
May I ask what Unit you have. What are the pitfalls? How did you manage to solve or work around the Bluetooth problems (i saw that joying for example released an update - can anyone tell me if that fixes the bluetooth problems?)
Is it more complicated than on other devices to install another launcher?
Thank you!
I have the Joying Intel 2GB/32GB head unit, the 135 variant. The bluetooth on it worked well out of the box with the update installed, but it was vastly improved following the instructions in this thread:
https://forum.xda-developers.com/an...elopment/bluetooth-settings-launcher-t3504526

10.25 Android/ with knob for Audi

Hey guys I recently had a android 10.25 unit installed in a Audi Q5 with has a knob with a back button and nav that replaces one of the side vents by the shifter, the unit works fine the only thing that bugs the hell out of me is 1 the brightness is to high at night I use some opacity app but it’s not convenient as it auto runs so during the day I have to change it back to brighter, the other thing is I can’t change anything on the menu, as I use Spotify I have no use for fixed apps on the menu like media, screen mirroring etc, I would like to find out if it’s possible to change some of the menu or tweak it in any way?!
I can’t post links so if you search on [YOUTUBE]
“ DIY installation 10.25” Android screen navigation and backup camera Audi Q5” by 4x4 shop Canada
Ive uploaded some unit pics on my google+ Account in my profile, can’t figure out how to attach pics without a URL yet
Bluetooth app
Been also looking for a Bluetooth app even as basic as skipping songs pause play so I can use on launchers as it’s a pain to use Spotify offline installed on the unit ( deletes playlist) can’t even creat an activity for my headunit bt/dial player
Manage to root it but still working on what to do next
Unit 10.25’
Mt5889
Android 5.11
Carsara android auto shop or very similar for Audi 10.25
Does anyone know how to bypass password locked launcher apk, been trying to access the app manifest to see if I can delete useless crap like menu items

PX5 S32F0 Head Unit Known Bugs: Inputs for Custom ROM deployment.

In this thread we collected enough money to help our friend @Malaysk to buy a device that will be used for a ROM development.
Now I am asking all the owners of a PX5 with S32F0 MCU to help @Malaysk work, reporting here the known bugs of their units. This will help him don't wasting time searching them and it will speed up the ROM development.
Add a post below, reporting the following information (following is mine.):
Model (Vendor): Erisin ES8176J PX5 64 Gb ROM 4Gb RAM Android 10 (Jeep Grand Cherokee)
ANDROID : 175134
MCU: S32F0_LEIMA-W_20200703-16:29_HD1_7708_D_FF_C8
APP: PX5C_C55_HA4_LeiMa_LeiMaUI2-0000-10-JS_2020-07-16-1734
Found Bugs:
1) Bluetooth Settings missed from Main Menu -->Connections (Pairing of devices like OBD, performed inside Telephony app)
2) Bluetooth AD2P App missing (BT Music supported inside the Telephony app)
3) FM Radio AF=On setting lost every time the app is closed
4) FM Radio "power Off" button missing
5) Bluetooth Ring and Call Volume too high at every reboot (settings are lost)
6) Stock launcher has only 2 desktop spaces for the Apps and is not possible to add more.
7) Steering Wheel commands are "pre-defined" in factory (Can Bus) and cannot be changed (The App is working only with resistive one)
8) "Ok Google" not working. It is impossible to enable the voice recognition learn process (button greyed)
Suggested Improvements (Ideas for @Malaysk):
1) Root
2) Rework of the apps GUI (Radio, BT, Music, etc.)
3) Customizable list of the Apps that are running instead of the stock
4) Complete Power Off button
5) Battery Voltage in status bar
6) Status Bar customizable in terms of items, size, etc.
7) Customizable Steering Wheel codes
8) Screen light intensity auto dimmed by Time of the Day
9) New launcher with media info on the home page
royalhawk2002 said:
In this thread we collected enough money to help our friend @Malaysk to buy a device that will be used for a ROM development.
Now I am asking all the owners of a PX5 with S32F0 MCU to help @Malaysk work, reporting here the known bugs of their units. This will help him don't wasting time searching them and it will speed up the ROM development.
Add a post below, reporting the following information (following is mine.):
Model (Vendor): Erisin ES8176J PX5 64 Gb ROM 4Gb RAM Android 10 (Jeep Grand Cherokee)
ANDROID : 175134
MCU: S32F0_LEIMA-W_20200703-16:29_HD1_7708_D_FF_C8
APP: PX5C_C55_HA4_LeiMa_LeiMaUI2-0000-10-JS_2020-07-16-1734
Found Bugs:
1) Bluetooth Settings missed from Main Menu -->Connections (Pairing of devices like OBD, performed inside Telephony app)
2) Bluetooth AD2P App missing (BT Music supported inside the Telephony app)
3) FM Radio AF=On setting lost every time the app is closed
4) FM Radio "power Off" button missing
5) Bluetooth Ring and Call Volume too high at every reboot (settings are lost)
6) Stock launcher has only 2 desktop spaces for the Apps and is not possible to add more.
7) Steering Wheel commands are "pre-defined" in factory (Can Bus) and cannot be changed (The App is working only with resistive one)
8) "Ok Google" not working. It is impossible to enable the voice recognition learn process (button greyed)
Suggested Improvements (Ideas for @Malaysk):
1) Root
2) Rework of the apps GUI (Radio, BT, Music, etc.)
3) Customizable list of the Apps that are running instead of the stock
4) Complete Power Off button
5) Battery Voltage in status bar
6) Status Bar customizable in terms of items, size, etc.
7) Customizable Steering Wheel codes
8) Screen light intensity auto dimmed by Time of the Day
9) New launcher with media info on the home page
Click to expand...
Click to collapse
For number 2) Bluetooth is a big mess, like you say, we don't even have the option in Settings. I would just like to be able to connect to a bluetooth device using the head unit.
For number 7), it would be indeed nice if we could program Steering Wheel buttons that are sent over CANbus.
additional:
10) Zlink app only supports Carplay, I would like it to work with Android Auto instead. I've seen different versions of Zlink passing by that support Android Auto...
Looks like all the same bugs which exist in MTCX units. Probably a port of the bugs, a copy as the Chinese are so well known for.
Check out the joying thread for the new units with a super cheap and cheerful processor and different MCU; same bugs.
bel.sander said:
additional:
10) Zlink app only supports Carplay, I would like it to work with Android Auto instead. I've seen different versions of Zlink passing by that support Android Auto...
Click to expand...
Click to collapse
My pre installed version of Zlink is supporting very well Android Auto on my Samsung Note 10.
Perhaps Malaysk could integrate it in the ROM.
marchnz said:
Looks like all the same bugs which exist in MTCX units. Probably a port of the bugs, a copy as the Chinese are so well known for.
Check out the joying thread for the new units with a super cheap and cheerful processor and different MCU; same bugs.
Click to expand...
Click to collapse
Probably the porting is only on the Android part, with the necessary adaptations for the different MCU.
royalhawk2002 said:
My pre installed version of Zlink is supporting very well Android Auto on my Samsung Note 10.
Perhaps Malaysk could integrate it in the ROM.
Click to expand...
Click to collapse
Yes! I'd like that
Bugs:
- unable to update Zlink (its included in the rom once deleted can´t be installed again, only by whole reset, not even the same APK i extracted before)
- ZLink crashing after 2-20 Minutes, can´t update Zlink
- Can SWC is increasing or decreasing Volume by 2 steps instead of one
- no Bluetooth while connected to zlink
wishes:
- customisable physical buttons (long/short press)
- changeable standard apps for radio, MP3 ...
- fix for volume on SWC
- day/night by lightswitch position
- support for a USB hub if possible (not tried it yet), as one more USB needed
- support for Autokit on the zlink-USB-port(alternative to zlink)
- option to really close apps instead of minimizing to taskmanager (have 3-5 DAB-z´s open from time to time)
- button combination to boot in recovery
- customisable apps to switch through when pressing "mode"-Button
- easy way to choose apps for splittscreen
- separate channel to adjust Sub-Out Volume
- display the station or song in the instrument via can
- navigation directions to show in instrument (arrows for example in a VW) via can
JimmyFreizeit said:
Bugs:
- unable to update Zlink (its included in the rom once delted can´t be installed again)
- ZLink crashing after 2-20 Minutes, can´t udate Zlink
- Can SWC is increasing or decreasing Volume by 2 steps instead of one
- no Bluetooth while connected to zlink
wishes:
- customisable physical buttons (long/short press)
- changeable standard apps for Radio, MP3 ...
- fix for volume on SWC
- Day/night by lightswitch position
- support for a USB Hub if possible (not tried it yet)
- support for Autokit on the USB(alternative to zlink)
- option to really close apps instead of minimizing to taskmanager (have 3-5 DAB-z´s open from time to time)
- button combination to boot in recovery
- customisable apps to switch through when pressing "mode"-Button
Click to expand...
Click to collapse
USB hub is supported, I have mine connected to a DAB+ receiver and USB stick through a powered USB hub
---------- Post added at 03:30 PM ---------- Previous post was at 02:59 PM ----------
one more bug, I'd like to see addressed:
- when I put the car in reverse gear, it automatically starts the reverse camera app. I've seen 'fixes' that say to remove the app, but I would like to keep the app (I still want to use it when I start the app myself), but not start the app when I put the car in reverse gear. Make this an option that can be selected.
thx!
bel.sander said:
USB hub is supported, I have mine connected to a DAB+ receiver and USB stick through a powered USB hub
:good::good::good:
---------- Post added at 03:30 PM ---------- Previous post was at 02:59 PM ----------
one more bug, I'd like to see addressed:
- when I put the car in reverse gear, it automatically starts the reverse camera app. I've seen 'fixes' that say to remove the app, but I would like to keep the app (I still want to use it when I start the app myself), but not start the app when I put the car in reverse gear. Make this an option that can be selected.
thx!
Click to expand...
Click to collapse
:good::good:be able to choose what to do when in reverse...Good point!
MCU-firmware is anders; er is een radiomodule 6686 en 7708., controleer, anders wordt de radio niet wakker met geluid..... this i have from the Russian site.!!
I would like to have the option DSP updated to the latest.... i have this radiomodule >> (7708) ... and maybe a new DAB+ app .. that just works better .. instead of the one preinstalled ..
Denfic said:
MCU-firmware is anders; er is een radiomodule 6686 en 7708., controleer, anders wordt de radio niet wakker met geluid..... this i have from the Russian site.!!
I would like to have the option DSP updated to the latest.... i have this radiomodule >> (7708) ... and maybe a new DAB+ app .. that just works better .. instead of the one preinstalled ..
Click to expand...
Click to collapse
Just use DAB-Z for DAB+. Works perfect for me!
I think you would have to physically upgrade the DSP-processor for real 16ch DSP. From what i read the DSP in our units is a fake. It has just 8 channels.
It would be nice if a balloon with the selected station was displayed on the screen for a moment when changing the radio station. When the radio works in the background and you switch stations using the button, we would know what the current station is.
bel.sander said:
USB hub is supported, I have mine connected to a DAB+ receiver and USB stick through a powered USB hub
---------- Post added at 03:30 PM ---------- Previous post was at 02:59 PM ----------
one more bug, I'd like to see addressed:
- when I put the car in reverse gear, it automatically starts the reverse camera app. I've seen 'fixes' that say to remove the app, but I would like to keep the app (I still want to use it when I start the app myself), but not start the app when I put the car in reverse gear. Make this an option that can be selected.
thx!
Click to expand...
Click to collapse
for the reverse... put the following code in the factory setting screen 0000121, a page should open with additional settings (Boot Config). I remember that I saw something there about "Back Camera". I am not sure about what changing this setting does, but a try could not arm... I hope! :laugh:
JimmyFreizeit said:
Just use DAB-Z for DAB+. Works perfect for me!
I think you would have to physically upgrade the DSP-processor for real 16ch DSP. From what i read the DSP in our units is a fake. It has just 8 channels.
Click to expand...
Click to collapse
Oke ..DSP i understand .. but DAB-Z i have tried to install ..does not work for me .. its not installing ... or should i uninstall the DAB+ app first ??
Denfic said:
Oke ..DSP i understand .. but DAB-Z i have tried to install ..does not work for me .. its not installing ... or should i uninstall the DAB+ app first ??
Click to expand...
Click to collapse
Nope... DAB Z should work even if you have the stock app installed. Is one of the first app I installed on my hu and I am using it regularly. Do you have a normal DAB usb dongle ?
Inviato dal mio SM-N970F utilizzando Tapatalk
1) I wish I could change favorite stations from the steering wheel
2) have the AF function work well and remain set after switching off
royalhawk2002 said:
Nope... DAB Z should work even if you have the stock app installed. Is one of the first app I installed on my hu and I am using it regularly. Do you have a normal DAB usb dongle ?
Inviato dal mio SM-N970F utilizzando Tapatalk
Click to expand...
Click to collapse
Hi .. i really had to uninstall the standard app first for DAB-Z to work .. never the less .. it works .. i don`t know what i have normal or regulair dongle .. i have a window antenna and i think the dongle is in the back of the unit .. however ..DAB-Z is working better than the DAB+ app .. is it normal that at first boot it crashes ?? Or am i missing something ??
Hello everyone. Guys, I just want to write you a few points so that everyone understands this.
1. The device has not even been sent to me yet, the status is awaiting dispatch (it is written that within 15 days, but the seller promised to send it as soon as possible).
2. The choice of sending the device was only regular Aliexpress mail (I do not know how long it will be delivered).
3. Working on the mod firmware will take a long time, as soon as I receive the device, I hope you understand that this is not done quickly. And this is a completely new device for me, although I suspect that it is similar from the forum thread for MCU MTCE.
4. Not everything that you have written here is possible to do.
5. I will try to make a ready-made firmware with ROOT access very quickly and post it here.
Thank you for understanding. I read this forum, but very rarely answer and do not use private messages (there is only one spam)
Malaysk said:
Hello everyone. Guys, I just want to write you a few points so that everyone understands this.
1. The device has not even been sent to me yet, the status is awaiting dispatch (it is written that within 15 days, but the seller promised to send it as soon as possible).
2. The choice of sending the device was only regular Aliexpress mail (I do not know how long it will be delivered).
3. Working on the mod firmware will take a long time, as soon as I receive the device, I hope you understand that this is not done quickly. And this is a completely new device for me, although I suspect that it is similar from the forum thread for MCU MTCE.
4. Not everything that you have written here is possible to do.
5. I will try to make a ready-made firmware with ROOT access very quickly and post it here.
Thank you for understanding. I read this forum, but very rarely answer and do not use private messages (there is only one spam)
Click to expand...
Click to collapse
Don't worry friend.... take your time...we know that all requests are hard to realise. This post is intended only to help you and give some ideas
Inviato dal mio SM-N970F utilizzando Tapatalk
Does somebody has the stock Launcher in .apk file ? If so can you give it to me .. i have no idea how to extract it from my unit .. !
I want to delete it and then go on with only the AGAMA Launcher .. and in time reinstall the stock one .. its not in OEM applications. That`s why i ask !
Or maybe all the stock apk`s.

Categories

Resources