Hi, I have a bricked LG L Fino.
The phone had ressurection remix installed, everything was working fine when one day it suddenly dropped dead after the battery had drained.
When turned on it shows LG logo and stays there forever and when trying to get into TWRP it freezes at "processing factory reset". I tried to flash kdz file, but after booting into download mode it freezes on "press the Volume Up key untill you see the download screen" then reboots shortly afterwards so there's no way I can flash it.
Any ideas?
Related
Update/Fix:
Got it to work again! I let the battery drain to 0% so I can boot it into download mode where I used the LG FlashTool to install ZVC. It's completely working now. I learned from my mistake.
-----------------------------------------------------------
Original post​
How it occurred:
I was trying to flash a ROM today with TWRP but I accidentally deleted/formatted my G2. (I haven't flashed anything in a while so I forgot that would delete the .zips) TWRP was unable to mount the USB so I restarted my phone and now I'm stuck at the LG logo.
What happens:
When I hold down the power button the screen goes black and the logo pops up again with the green and blue LED, so I can't turn off my phone completely. I tried going into download mode and recovery mode but it just shows the LG logo and nothing else.
If anyone knows how I can fix this, that would be great. :good:
Also, I have LG FlashTool. If I can get into download mode I think I'll be able to fix it.
Mod Edit:
Fixed and Thread closed at OPs request
Hi everyone,
After trying to flash the resurrection remix rom on my LG G2 D805, i got stuck on the logo, with no recovery mode, and on download mode it says "USER B3" or "USER B4" and rooted, and when i try to flash the kdz file it says "upgrade stopped due to an error". Also, the phone if not on download mode is not recognized by windows, and on download mode, on device manager, its recognized as "USB composite device". Furthermore, I don't know if this have anything to do with the issue, but on the same day i tried to flash the rom, in the morning the phone was REALLY hot, even burning my hands, and not turning on, so i left it cool down and then it was working properly when i decided to flash the rom... Do you guys think there is any way to get my phone back working?:crying:
Thank you all for your time!
Are you positive you cannot enter recover. Try this. Hold the power button for 30 sec. Then hold volume down and the power button simultaneously until you see the lg logo. When you see the logo quickly let go of the buttons and reclick them immediately. It should go to factory reset screen. From there continue and you should boot into twrp.
Sent from my LG-D800 using Tapatalk
Nope, doesn't work. The phone just keeps rebooting and after pressing both buttons gets stuck on the logo, or just turn the screen off and start blinking a red led...
what g2 model do you have? if you are in the screen of user b3 or user b4 and the word rooter with red color as you mentioned then you are in download mode, now if kdz is not working the other method you have is TOT method, if there is no tot files for your g2 variant try to uninstall and then reinstall the drivers and then try flash kdz again or also you can try with fastboot commands to return to recovery
Thank you so much! I found the TOT files and could save the phone, problem solved
Hi,
I'll start it from beginning. I wanted to update my G2 F320L from Android 4.4.2 to 5.0.1. From first try, it don't worked because in Lg flash tool 2014 I selected "Normal flash", and it stopped at LG Logo. I tried again, but with "CSE flash" and it worked. Everything was fine. So I wanted do root this. To root I used LG One click root. On pc it stopped at 90%, but on phone (download mode) was nothing, 0%. So i managed to turn off this app, and plug out G2. Then I restarted the G2. When it turned on, again stopped on LG logo. So again, I wanted to reflash rom by "CSE flash". It flashed successfully. Now when I want to turn on LG, it shows LG logo, and next I can see is green Android robot and under it message "Deleting", and after it G2 is restarting, turning on the system, and there is a normal message (but in Korean): Updating apps like 6 from 160. When it went to 160, phone is restarting and again, LG logo, Android robot with "deleting" text. Over and over. What can I do now? I can enter to Download Mode, and Hard reset mode (I think it's hard reset mode, because there are lots of Korean weird symbols). How to flash it?
Hello, I tried to install cm 12.1, it failed and when I tried to restart the phone it loops in the LG logo.
I tried to do the LG flashtool method but it get stuck in 10%, using both laptop and pc with windows 10.
Another thing is that when i try to do the hard reset (volume button - and power button) it do the factory reset but next show the firmware update screen and not the lg logo like a normal lg g2 do.
Check the error log in the folder C:\LGMobileUpgrade. Last part of the log might give you a clue what went wrong. For example I got an error "PostMsg STEP_TYPE_ENV_ERROR" or "Step : TYPE_WPARAM_UPGRADE_ERROR".
Phone Model: AT&T LG G2 (D800)
Recovery: Custom TWRP Recovery
ROM: CM12 Official ROM
My phone was working fine from last 3-4 months, until today it restarted and got stuck on 'LG' logo, I left it for some time and it shows the demigod green screen of death with option to access download mode and restart.
What I already did!
1) Full hard reset, I can access the TWRP.
2) Flashed the ROM again.
Current Situation!
Stuck on LG logo from last 10mins.
Thanks in advance.
Edit #1: Reflashed the same ROM (CM12) and it booted into the language selection page, freezes and restarted. Stuck on black screen, I turned it off by pressing the power button for 10-15 secs. I kept it in a freezer for 10-15secs and turned it on, same happened.
Edit #2 I flashed a stock based ROM through TWRP, it was going fine but it froze in between, I waited for some time and it went black. I waited for 1 hr and it was still black so I hold the power button and restarted the phone.
Now its showing "Secure Boot Error" which remains for some secs and a black screen comes, I can't open TWRP, Download mode is accessible but after 2 secs into download mode, secure boot error comes. Whenever I try to connect it to Windows PC(I installed all the required drivers and all) it starting popping up drives(with option to format) which never stops until I remove the USB cable.
Hi!
In this thread someone posted a solution.
jazibzps said:
Steps to perform.
1. While in critical error screen you have an option to press volume up button to boot into download mode( although it will not boot to download mode) but still press volume up button so your Pc can detect your phone.
2. Now flash a kdz file of your lg g2 with flash tool. ( you can google for it to download flash file for your lg g2 and how to flash it with lg flass tool.)
3. When you will try to flash it will fail..
4. Now power off your phone by pressing power button.
5. Now boot to download mode and flash the correct kdz with lg flash tool and u r good to go..
To acess download mode power off your phone immediately press volume up button and while keep pressing it and plug in usb cable and you will be in download mode
I performed all this on lg g2 d801 but i hope u can try it on other varients as well. As i was scared of short circut method and srk tool didn't help..
Click to expand...
Click to collapse
For informations about LGs flashtool etc. please check out the G2-Index-Thread.
Jan Philipp said:
Hi!
In this thread someone posted a solution.
For informations about LGs flashtool etc. please check out the G2-Index-Thread.
Click to expand...
Click to collapse
Thanks for replying.
My case is a bit different now, I reflashed the same ROM(CM12) and it successfully booted, worked for 10 secs and it was frozen, restarted automatically, stuck on LG Logo.
I notice that there's some heat issue, I kept it in freezer for 10 secs, rebooted it, it booted till language selection page and freeze after 10-15secs.
Also the link is for DemiGod Critical Crash, mine is DemiGod Kernel Crash.
Updated!!
First post updated, please check the current situation before posting anything.
I don't have a computer or laptop to connect it to so how can I fix it?