Hi,
I have an A2017G which after trying linageos had the stock rom from here https://forum.xda-developers.com/axon-7/development/rom-guide-updates-to-stock-files-via-t3469484 TWRP and an unlocked bootloader. That worked ok, and I wanted to upgrade to the stock ROM 7.1. I installed this using TWRP https://forum.xda-developers.com/showpost.php?p=71664539&postcount=29. But now when it boot's after the bootloader it's stuck showing a linux logo, and it won't boot Android.
In the bootloader (http://i.imgur.com/Os4vkwT.jpg) I can try to go to fastboot, but selecting that only reboots the phone. I can however select recovery and go to the stock recovery (http://i.imgur.com/PBj6y6X.jpg). From there I have tried to sideload (selecting Apply update from ADB and adb sideload rom.zip) the stock rom (http://www.ztedevice.com/support/detail?id=1170789A90BA42E18B3364B80C7F5A26), the previous rom I tried to install (https://forum.xda-developers.com/showpost.php?p=71664539&postcount=29) and another TWRP stock rom (https://forum.xda-developers.com/axon-7/development/rom-kernel-stock-7-1-1-b02-based-a2017g-t3592470) but all fail at the very beginning saying "(adbd status 1) Installation aborted" (http://i.imgur.com/RzNSBtu.jpg).
I also tried to install linageos back using sideload but it fails ("failed to verify whole-file signature"). I believe that is because it's not the official rom and the stock recovery only accepts that.
ADB only works in sideload mode and fastboot doesn't (it loads the bootloader again).
Do you know how I should proceed? How could I install the stock rom, or TWRP again?
Thanks in advance.
Try it with this guide:
https://forum.xda-developers.com/axon-7/how-to/guide-reinstall-twrp-root-update-to-t3578552
If you can't flash recovery with axon7toolkit try it with the last step "Get Fastboot" first. ZTE removed the fastboot mode in Nougat, so you have to flash another fastboot image.
If you can boot into fastboot again you can flash TWRP and from TWRP a rom.
Good luck!
Hi Darkem,
Thanks a lot, that actually worked. I was under the impression I wouldn't be able to install TWRP because I was only able to use the command "adb sideload update.zip" but other commands like "adb reboot edl" didn't work. But as it's said in the other post, pushing the three buttons of the phone set the phone into EDL mode. From there I was able to install TWRP.
Thanks a lot again
(A2017G) Hello. I no longer have access to fastboot because I flash a stock rom (Nougat) with the recovery stock and it has removed my modified bootloader, I managed to install twrp in edl mode but I still have no access to bootloader. What should I do please? Flash a stock rom (Marshmallow) here (https://forum.xda-developers.com/axon-7/how-to/download-center-factory-images-ota-t3606547) to gain access to fastboot again (bootloader )? Thank you. Sorry translation from French to English with Google Translate
GAO161 said:
Hello. I no longer have access to fastboot because I flash a stock rom (Nougat) with the recovery stock and it has removed my modified bootloader, I managed to install twrp in edl mode but I still have no access to bootloader. What should I do please? Flash a stock rom (Marshmallow) here (https://forum.xda-developers.com/axon-7/how-to/download-center-factory-images-ota-t3606547) to gain access to fastboot again (bootloader )? Thank you. Sorry translation from French to English with Google Translate
Click to expand...
Click to collapse
Granted I have the A2017U, but in stock recovery I can still access the phone memory with my pc. Why not download the stock rom from ZTE, put it on the phone memory, and flash it in the stock recovery?
tabletalker7 said:
Granted I have the A2017U, but in stock recovery I can still access the phone memory with my pc. Why not download the stock rom from ZTE, put it on the phone memory, and flash it in the stock recovery?
Click to expand...
Click to collapse
So I flash a recovery stock with twrp and then I update to an official version Marshmallow with the recovery stock? I will recover my bootloader? Thank you
GAO161 said:
So I flash a recovery stock with twrp and then I update to an official version Marshmallow with the recovery stock? I will recover my bootloader? Thank you
Click to expand...
Click to collapse
Sorry, why do you want fastboot? If you're planning to relock the bootloader you'll need to be fully stock, which wouldn't be the case if you just installed a fastboot zip. Relocking the bootloader is probably the only thing that fastboot is mandatory for
Choose an username... said:
Sorry, why do you want fastboot? If you're planning to relock the bootloader you'll need to be fully stock, which wouldn't be the case if you just installed a fastboot zip. Relocking the bootloader is probably the only thing that fastboot is mandatory for
Click to expand...
Click to collapse
I want fastboot to be able to order with adb. Before I had it and when I flash a rom stock nougat it has deleted me
GAO161 said:
I want fastboot to be able to order with adb. Before I had it and when I flash a rom stock nougat it has deleted me
Click to expand...
Click to collapse
on fastboot mode you have fastboot lol
you have adb on FTM mode (vol down + power) or recovery
Choose an username... said:
on fastboot mode you have fastboot lol
you have adb on FTM mode (vol down + power) or recovery
Click to expand...
Click to collapse
I want to go back to ROM stock and bootloader locked but when I do not have access to the bootloader anymore I can not do the command "adb lock oem"
Related
EDIT - UPDATED INSTRUCTIONS 12th May 2014
Due to the partition sizes being different in the GPE RUU it is not simply a case of flashing a sense rom in recovery. You will experience problems if you do this. This might involve getting the storage encrption message, bootloops, freezing etc etc.
This thread is specifically for users who have problems getting back to sense. Solution is below. If you have alternative solutions that have worked without issues please post.
I have tried to make them as simple as possible. This guide assumes you are S-Off otherwise how did you get here. (
This does not apply if you have installed a GPE ROM. You can flash as normal through recovery. (using instructions of new rom)
Thanks to @exad for his continuing support/assistance throughout the thread, as well as @graffixnyc for the GPE RUU and both he and @navalynt for finding the initial fixes.
It will be much easier if you have your new Rom on your external sdcard prior to starting this. It will also stop a number of problems if you have SuperCID (11111111) If you don't know how to - FASTBOOT Commands
1. Enter the command "fastboot oem readcid". Make and KEEP a note of your original CID.
2. Enter the command "fastboot oem writecid 11111111"
3. Enter the command "fastboot read cid" [it should confirm your CID is 11111111]
4. Press the volume down button twice on your phone and navigate to reboot bootloader, then hit power button to reboot the bootloader.
5. Bootloader will also say "CID-11111111" now to confirm (Thanks to @xl VipeR lx ) Also to @umjammerlammy for the GENTLE reminders to include this
Make sure the firmware file and twrp recovery are in your Android directory on your PC - Mine is
C:\Users\Grentuu\AppData\Local\Android\android-sdk\platform-tools\
During this process you may find that when you reboot the phone starts to boot into android. Mine did but simply had the GPE animated logo but never entered GPE. All you do is press Vol up and power for about 10 seconds to reset. As soon as it resets press vol down and power to get back to bootloader.
Flash 1.54.401.5 firmware from Here
Fastboot Method
Boot device into FASTBOOT mode either by adb reboot bootloader or Vol down & Power (device should show FASTBOOT USB)
Make sure the firmware file to be flashed is in your android folder
Open a command prompt from the folder where fastboot resides. (Hold shift key/right click in the dir to get menu - left click on Open Command Prompt here.)
Run the following commands:
fastboot oem rebootRUU (this will reboot the device into RUU mode in preparation for zip flashing)
fastboot flash zip 1.54.401.5-W_Splash.zip (the name of the zip should EXACTLY match the name of the file you're flashing)
It will fail the first time. Run the same command AGAIN until you see it has flashed successfully.
I repeat - Run the same command TWICE until you see it has flashed successfully.
Once complete, type fastboot reboot-bootloader The hyphen is required.
Some users have stated this firmware (1.54.401.5) did not work for them as they weren't GSM and reboots just threw them back to recovery. If this happens try a stock (your original e.g. T-mobile) firmware then follow the rest of the process.
Boot into stock recovery
Factory reset
Reboot into bootloader
Flash TWRP - command = fastboot flash recovery openrecovery-twrp-2.7.0.2-m8.img (The must match exactly the name of the recovery you are flashing and remember the recovery file must be in your android folder)
Boot into TWRP
Go into Wipe menu
do a full factory reset wipe
Reboot back into recovery
Install rom
Profit
These have worked for me everytime (Change count =19)
Thanks for this. I'm about to give it a shot now.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
---------- Post added at 05:08 PM ---------- Previous post was at 04:40 PM ----------
For some reason the firmware wont flash in twrp. Should I sideload the firmware?
Sent from my GT-P5210 using XDA Premium 4 mobile app
To flash a firmware you must be in bootloader/fastboot mode.
Fastboot oem rebootRUU
Fastboot flash zip firmwarefilename.zip
Then again
Fastboot flash zip firmwarefilename.zip
Fastboot reboot-bootloader
exad said:
To flash a firmware you must be in bootloader/fastboot mode.
Fastboot oem rebootRUU
Fastboot flash zip firnwarefilename.zip
Then again
Fastboot flash zip firnwarefilename.zip
Fastboot reboot-bootloader
Click to expand...
Click to collapse
Thanks. Understood, I was just reviewing my steps for the conversion. I really just want to try out that new Sense rom and then I'll probably revert back. BRB...I'll let you know how it goes.
Bear in mind you must have S-off to flash a firmware that way.
exad said:
To flash a firmware you must be in bootloader/fastboot mode.
Fastboot oem rebootRUU
Fastboot flash zip firmwarefilename.zip
Then again
Fastboot flash zip firmwarefilename.zip
Fastboot reboot-bootloader
Click to expand...
Click to collapse
Those are the instructions in post 1 the original thread.
The issue is with people wanting to go back to sense
This thread is about returning to sense. Flashing a firmware is always the same. It's the firmware itself that's different...
Here is where I am at..
I converted to GP easily and it worked well.. I wanted to convert back so I installed twrp first, then through twrp installed the 1.54.401.5 firmware.
Installing that firmware removed twrp and the rom. So I am without an OS at all, and have stock recovery.
Is there anyway I can flash a custom recovery or a rom via the stock firmware/recovery?
My computer will not recognize adb devices. But it used to obviously.
I have an SD card.
Any help and I will be sooo grateful. (maybe even donate)
Thanks!
You can't flash a firmware through recovery... You can flash a stock recovery after the steps listed above if you like. See the stock backup thread.
You can flash any recovery through fastboot... Adb only works with the rom booted or with custom recovery booted.
Thanks will try it out.
exad said:
You can't flash a firmware through recovery... You can flash a stock recovery after the steps listed above if you like. See the stock backup thread.
You can flash any recovery through fastboot... Adb only works with the rom booted or with custom recovery booted.
Click to expand...
Click to collapse
So what do I do in this situation with no rom installed only 1.54 firmware and stock recovery.
Flash twrp
exad said:
Flash twrp
Click to expand...
Click to collapse
I have no rom installed, so it wont show in adb devices.
PunchLick said:
I have no rom installed, so it wont show in adb devices.
Click to expand...
Click to collapse
You flash recovery via fastboot, no need for a rom.
Just make sure you have the proper fastboot drivers from htc.
Dmaxon said:
You flash recovery via fastboot, no need for a rom.
Just make sure you have the proper fastboot drivers from htc.
Click to expand...
Click to collapse
ADB devices shows no devices. If i had custom recovery this would be so much easier, but im using 1.54.401.5 firmware with stock recovery and no ROM.
Just dont know what to do to get a working device again. All i can do is boot into stock recovery, hboot and fastboot.. but computer shows no device.
PunchLick said:
ADB devices shows no devices. If i had custom recovery this would be so much easier, but im using 1.54.401.5 firmware with stock recovery and no ROM.
Just dont know what to do to get a working device again. All i can do is boot into stock recovery, hboot and fastboot.. but computer shows no device.
Click to expand...
Click to collapse
I would recommend the All-In-One Toolkit. This will allow you to fastboot the recovery, even though the pc doesn't recognize it. This has worked for me in the past.
Meanwhile, I get the following error message when attempting to flash the 1.54...
Any suggestions guys???
Problem solved. I had not supercid. After I did that, I was able to successfully flash 1.54...
Why post steps if your not willing to help?
The steps in the OP can still cause issues for some people.
Sent from my HTC One_M8 using Tapatalk
Ideas4ya said:
I would recommend the All-In-One Toolkit. This will allow you to fastboot the recovery, even though the pc doesn't recognize it. This has worked for me in the past.
Meanwhile, I get the following error message when attempting to flash the 1.54...
Any suggestions guys???
Problem solved. I had not supercid. After I did that, I was able to successfully flash 1.54...
Click to expand...
Click to collapse
Can you elaborate a little on which options etc, because that sounds fantastic and would help me so much!
PunchLick said:
Can you elaborate a little on which options etc, because that sounds fantastic and would help me so much!
Click to expand...
Click to collapse
When you open the all in one...the 3rd option on the top right is what you need. Follow the step, even if fastboot says device is not connected, this will still send the recovery to your device as long as you're in the bootloader.
I will never understand why people play with there phones and have no understanding of adb and fastboot commands with the bootloader. if people would learn that first there wouldn't be so many threads when they get stuck. tool kits are bad it makes people lazy. but I appreciate the devs who make them
Guys... when i tried to flash oos 3.0 on my op2 through twrp, i first wiped the data to install new rom, then install oos 3.0, it failed. I then flashed the recovery i downloaded from the thread, then restart the recovery
I cant boot into the recovery.
System can't boot
Is it called "brick"?
So i tried to flash stock recovery in pc by command, but it says "remote: device is locked. cannot flash images". any solution to this problem?
I can boot into fastboot mode
You need to run the phone in Qualcomm mode on a PC and run the recovery tool to fix you bootloader.
I did the same and it was a royal ball ache trying to find out how to fix it
Don't do what rosswaa said
Why not?
What you should do is boot your phone into fastboot mode, connect it to your pc. Flash this modified TWRP recovery img to your phone https://www.androidfilehost.com/?fid=24459283995297945. After that you have to flash this modified SuperSU (through the new recovery) https://www.androidfilehost.com/?fid=24459283995297946.
The normal recovery doesn't work in OOS 3.0 (just like in HOS) and it's the SuperSU that gives you the soft brick. A dirty flash of the modified SuperSU should fix it.
I also had your problem and I did what rosswaa said which shouldn't be necessary (I lost all my data and backups).
I didn't lose anything, but I tried doing what you said and my bootloader was screwed so wouldn't take a flashed recovery or anything (yes the modified one)
Wish I hadnt been so excited and just flashed but all sorted now
Hmm okay, if it doesn't work with flashing the new recovery img then do what rosswaa said and after that follow this post https://forums.oneplus.net/threads/installation-instructions-faqs-oxygenos-3-0-0.439108/
Obviously try what green says first, if it works then happy days
first i am really glad that someone give some advices on me. But since i am a noob, how can i flash twrp in fastboot mode? using command? "fastboot flash recovery xxx.img"? thx
SPiCa39's said:
Guys... when i tried to flash oos 3.0 on my op2 through twrp, i first wiped the data to install new rom, then install oos 3.0, it failed. I then flashed the recovery i downloaded from the thread, then restart the recovery
I cant boot into the recovery.
System can't boot
Is it called "brick"?
So i tried to flash stock recovery in pc by command, but it says "remote: device is locked. cannot flash images". any solution to this problem?
I can boot into fastboot mode
Click to expand...
Click to collapse
1 Install official TWRP 3.x via fastboot twrp.me/devices/oneplustwo.html
Reboot to recovery
2 install this modified version of TWRP
forum.xda-developers.com/oneplus-2/development/recovery-teamwin-recovery-project-3-0-0-t3310713
Reboot to recovery
3 install oos3 (And supersu)
Sorry i can't post link
Hello Guys , I had tried to flash custom ROM for my scc-u21 so I had.
Rooted my device using kingroot
downloaded the ROM and TWRP img
installed Rashr to flash TWRP
tried to Flash TWRP using rashr but it's opened fastboot mod and says Please connect your phone to Hisuit
Phone: Unlocked
SRP: Unlock
so when I try to flash TWRP.img it open fastboot mode only
Tried Method Voulme up + Power it open Fastboot
Tried Download mode Volm up & down + power But already same fastboot mode
But My Device Opening Software Normally
maybe I won't to Format it because of Fastboot mode
what I have to do?!
that's because I didn't Unlocked my bootloader?!
And tell me what I have to Do please I wanna get back stock recovery , or TWRP recovery to flash custom ROM
Please Help
thanks.
Desill said:
Hello Guys , I had tried to flash custom ROM for my scc-u21 so I had.
Rooted my device using kingroot
downloaded the ROM and TWRP img
installed Rashr to flash TWRP
tried to Flash TWRP using rashr but it's opened fastboot mod and says Please connect your phone to Hisuit
Phone: Unlocked
SRP: Unlock
so when I try to flash TWRP.img it open fastboot mode only
Tried Method Voulme up + Power it open Fastboot
Tried Download mode Volm up & down + power But already same fastboot mode
But My Device Opening Software Normally
maybe I won't to Format it because of Fastboot mode
what I have to do?!
that's because I didn't Unlocked my bootloader?!
And tell me what I have to Do please I wanna get back stock recovery , or TWRP recovery to flash custom ROM
Please Help
thanks.
Click to expand...
Click to collapse
You need to get the bootloader code
Amaan007 said:
You need to get the bootloader code
Click to expand...
Click to collapse
Unlock your bootloader, then Flash the stock recovery through fastboot. You probably won't even loose your data
adam_s_459_ said:
Unlock your bootloader, then Flash the stock recovery through fastboot. You probably won't even loose your data
Click to expand...
Click to collapse
You will if u unlock ur bootloader
Amaan007 said:
You will if u unlock ur bootloader
Click to expand...
Click to collapse
I didn't when I unlocked mine. That's weird
adam_s_459_ said:
I didn't when I unlocked mine. That's weird
Click to expand...
Click to collapse
Its is may or may not
Huawei Y6 scc u21 Twrp Recovery Link Plz .
I was going through the usual steps of flashing lineage 14.1 to my Axon 7.
In one of the guides i was following it recommended downgrading to android marshmallow before flashing lineage, which i did.
I had TWRP installed however this got removed when i flashed the stock marshmallow file which included stock recovery.
However, i cant get it to boot into fastboot, i tried, "adb reboot fastboot", and tried the manual method by holding down the power and + vol.
When it reboot it just skips fastboot and just boots normally
I'm not sure what is wrong, whether the bootloader is corrupt or it is completely missing.
I'm not sure how i can flash a new bootloader if i can't use fastboot. If there is a piece of software out there that can flash without fastboot i would be thankful for a pointer.
GeorgeJohnson5610 said:
I was going through the usual steps of flashing lineage 14.1 to my Axon 7.
In one of the guides i was following it recommended downgrading to android marshmallow before flashing lineage, which i did.
I had TWRP installed however this got removed when i flashed the stock marshmallow file which included stock recovery.
However, i cant get it to boot into fastboot, i tried, "adb reboot fastboot", and tried the manual method by holding down the power and + vol.
When it reboot it just skips fastboot and just boots normally
I'm not sure what is wrong, whether the bootloader is corrupt or it is completely missing.
I'm not sure how i can flash a new bootloader if i can't use fastboot. If there is a piece of software out there that can flash without fastboot i would be thankful for a pointer.
Click to expand...
Click to collapse
You got stuff wrong. I don't know if 'reboot fastboot' works, but it's actually "reboot bootloader". Plus they got rid of it since Marshmallow, and you have to install it if you want it.
Use EDL and install TWRP with it (EDL Tool by djkuz , or axon7tool by tennear). Don't even reflash the bootloader
Choose an username... said:
You got stuff wrong. I don't know if 'reboot fastboot' works, but it's actually "reboot bootloader". Plus they got rid of it since Marshmallow, and you have to install it if you want it.
Use EDL and install TWRP with it (EDL Tool by djkuz , or axon7tool by tennear). Don't even reflash the bootloader
Click to expand...
Click to collapse
Thank you, all fixed now and Lineage installed
was running the xiaomi.eu rom beta then flashed to stable and now soft brick
adb devices shows "recovery" instead of "device"
adb reboot fastboot and the phone goes into an encrypted twrp 3.3.0.0
I have miflashtool
Aaagogo said:
was running the xiaomi.eu rom beta then flashed to stable and now soft brick
adb devices shows "recovery" instead of "device"
adb reboot fastboot and the phone goes into an encrypted twrp 3.3.0.0
I have miflashtool
Click to expand...
Click to collapse
Hey there!
I kinda new here so forgive me if I gave you a wrong guide, but from what i read across forums, if you're phone get soft bricked, you just need to flash the stock firmware. try to find latest xiaomi stock firmware.
Adb devices shows "recovery" means your device was in recovery mode. Try "adb reboot recovery" and you'll end up in your custom recovery (I assume you installed one). If your recovery was encrypted try to install push "disable dm variety" command on adb and when your custom recovery asks for password, just press cancel or enter and you'll enter recovery mode.
From your recovery mode, you can enter sideload and install everything from there using adb from your computer.
Hopefully your phone will get better soon! lol
P.S.: sorry for my bad English, I'm not a native speaker.
rchmdnglng said:
Hey there!
I kinda new here so forgive me if I gave you a wrong guide, but from what i read across forums, if you're phone get soft bricked, you just need to flash the stock firmware. try to find latest xiaomi stock firmware.
Adb devices shows "recovery" means your device was in recovery mode. Try "adb reboot recovery" and you'll end up in your custom recovery (I assume you installed one). If your recovery was encrypted try to install push "disable dm variety" command on adb and when your custom recovery asks for password, just press cancel or enter and you'll enter recovery mode.
From your recovery mode, you can enter sideload and install everything from there using adb from your computer.
Hopefully your phone will get better soon! lol
P.S.: sorry for my bad English, I'm not a native speaker.
Click to expand...
Click to collapse
going to retry twrp from 10.3.6.0 PFGMIXM
TWRP is encrypted,
i miflashtoll back to 10.3.6.0 PFGMIXM, unlocked bootloader
flash twrp 3.3.0.0 and still the same result, encrypted TWRP.
no twrp means no root, need assistance.
Aaagogo said:
was running the xiaomi.eu rom beta then flashed to stable and now soft brick
adb devices shows "recovery" instead of "device"
adb reboot fastboot and the phone goes into an encrypted twrp 3.3.0.0
I have miflashtool
Click to expand...
Click to collapse
Hello,
And if instead of executing "adb fastboot reboot", you try to access fastboot mode with Vol- and Power?
What happen?
hugomoya said:
Hello,
And if instead of executing "adb fastboot reboot", you try to access fastboot mode with Vol- and Power?
What happen?
Click to expand...
Click to collapse
i can access fastboot with no problems, it's booting into recovery that doesn't work
i am using twrp from the official thread;
https://forum.xda-developers.com/redmi-note-7/how-to/one-redmi-note-7-unlock-bootloader-t3890751
same thing happen on all 3 methods of rebooting after flashing, all boots into encrypted twrp.
i hope there is a solution, i can't try anything now, there is a 24hour waiting period to unlock more than 1 bootloader a day
IceMan on xiaomi.eu has a working twrp;
TWRP 3.3.2-2 RN7 by IceMan
Aaagogo said:
i can access fastboot with no problems, it's booting into recovery that doesn't work
i am using twrp from the official thread;
https://forum.xda-developers.com/redmi-note-7/how-to/one-redmi-note-7-unlock-bootloader-t3890751
same thing happen on all 3 methods of rebooting after flashing, all boots into encrypted twrp.
i hope there is a solution, i can't try anything now, there is a 24hour waiting period to unlock more than 1 bootloader a day
Click to expand...
Click to collapse
Which is the principal problem?
Does the smartphone not start? I mean, the operating system.
Because if that's the problem, and you can start in "fastboot" mode, you can install your official ROM with MiFlash.
And reinstall TWRP, Orange Fox for example.
Regards!
hugomoya said:
Which is the principal problem?
Does the smartphone not start? I mean, the operating system.
Because if that's the problem, and you can start in "fastboot" mode, you can install your official ROM with MiFlash.
And reinstall TWRP, Orange Fox for example.
Regards!
Click to expand...
Click to collapse
every method of twrp with the "unofficial" twrp from the link to boot into encrypted twrp, can't install magisk for twrp to take
https://forum.xda-developers.com/redmi-note-7/how-to/one-redmi-note-7-unlock-bootloader-t3890751
twrp from link above
normal reboot goes into encrypted android
fastboot no prob
Aaagogo said:
every method of twrp with the "unofficial" twrp from the link to boot into encrypted twrp, can't install magisk for twrp to take
https://forum.xda-developers.com/redmi-note-7/how-to/one-redmi-note-7-unlock-bootloader-t3890751
twrp from link above
normal reboot goes into encrypted android
fastboot no prob
Click to expand...
Click to collapse
Try with Orange Fox R10.0 Stable (Based in TWRP 3.3.1)
https://sourceforge.net/projects/orangefox/files/lavender/
Regards!
hugomoya said:
Try with Orange Fox R10.0 Stable (Based in TWRP 3.3.1)
https://sourceforge.net/projects/orangefox/files/lavender/
Regards!
Click to expand...
Click to collapse
cheers for that, i'm using twrp 3.2.3-2 RN7 by IceMan over at xiaomi.eu