Related
Hello, I recently tried a reliance jio sim in India. This carrier only offers calling through volte and there is no volte option in my s5.
Can anyone tell me if a custom rom can enable this function or flashing a rom from different country like australia will solve this problem?
Appreciate all the help.
one of the dark roms has it --- im running the rom but i don't have the facility of Volte ...
Give it a try
DarkLord N5 UX2 N920SKSU2ZPFB-G900F
Vaibhavs800 said:
Hello, I recently tried a reliance jio sim in India. This carrier only offers calling through volte and there is no volte option in my s5.
Can anyone tell me if a custom rom can enable this function or flashing a rom from different country like australia will solve this problem?
Appreciate all the help.
Click to expand...
Click to collapse
i have g900i also and jio sim but did not work..
beargeo said:
one of the dark roms has it --- im running the rom but i don't have the facility of Volte ...
Give it a try
DarkLord N5 UX2 N920SKSU2ZPFB-G900F
Click to expand...
Click to collapse
Thanks, I will try it.
Volte
Did it work!?
i tried replacing s5 csc folder with csc folders from volte enabled version of s6. it catches volte for sometime and then loses signal altogether. volte is shown be two large arrows pointing to left and right
Nee csc does not support volte
As per Alexander csc "nee" should support volte but jio sim getonly 4g network no voice calling i have to an stupid app with my internet open 24hr to make call lol.
Rom im using xxx version 5.2
.
I did a fresh install of AUT csc version. Through odin.
Still in not getting Volte option.
Is thir something im missing.
Help.
In custom xls i see volte text and in others xls alsi see volte text wirtten
---------- Post added at 01:43 AM ---------- Previous post was at 01:38 AM ----------
For jio sim we have call jio center and give them Imie number so they can enable volte for your phone
After lot of search it seem my s5 g900f will not support JIO.
S5 does not support band with 40
All qualcomm varients of Galaxy S5 supports all possible bands. Search for app called "Hidden settings" and switch band to EURO or auto and you would get band 40. I am still trying to figure out the VOLTE code. I will try the Darklord custom rom, but switching roms is a time consuming task. One day...
keshey said:
All qualcomm varients of Galaxy S5 supports all possible bands. Search for app called "Hidden settings" and switch band to EURO or auto and you would get band 40. I am still trying to figure out the VOLTE code. I will try the Darklord custom rom, but switching roms is a time consuming task. One day...
Click to expand...
Click to collapse
I did install the app but i wad not to find opton to change euro or auto nor i was able too option band
I tried to change band setting from QXDM
For 40 - 549755813888 ( no network)
Then agian changed to 549755813908 (which is total of 3 ,5 and 40) network is back but still no volte
gpkumaran said:
i tried replacing s5 csc folder with csc folders from volte enabled version of s6. it catches volte for sometime and then loses signal altogether. volte is shown be two large arrows pointing to left and right
Click to expand...
Click to collapse
Can u give us those s6 CSC files ...that u replaced...so that I can give it atry on my G900I
I have tried many CSC but no luck
I check Volte option in CSC also
What is rcs?
Article about Rcs
https://www.geekiest.net/post/Reliance-Jio-RCS.aspx
I get 4g network but i cant make call as my network only support Volte call only
<CscFeature_IMS_EnableIMS>TRUE</CscFeature_IMS_EnableIMS>
<CscFeature_IMS_EnableVoLTE>true</CscFeature_IMS_EnableVoLTE>
<CscFeature_IMS_EnableLTEVideoCall>true</CscFeature_IMS_EnableLTEVideoCall>
<CscFeature_IMS_EnableRCSe>false</CscFeature_IMS_EnableRCSe>
<CscFeature_IMS_EnableRCSPresence>false</CscFeature_IMS_EnableRCSPresence>
<CscFeature_IMS_FrameworkVersion>5.0</CscFeature_IMS_FrameworkVersion>
Is their something to do with band with
On my more search i found that s5 has some bandwidth modifications
Since JIO volte bandwidth may not be supported by s5
My questions is that. In which rom are all bandwidth open.
Jio network band 40(2300) ; 5 (850) ; 3 (1800)
Galaxy S5 SM-G900F - LTE 800/850/900/1800/1900/2100/2600 Europe(LTE Variants) for Europe
I guess my S5 does not have 40(2300). I not sure but i guess that is i cant connect to internet but i cant mak call.
May be for internet JIO use band 5 and 3 but for volte may be we need bandwidth 40. (Cant say it truly
I tried to change band setting from QXDM
For 40 - 549755813888 ( no network)
Then agian changed to 549755813908 (which is total of 3 ,5 and 40) network is back but still no volte
After so much of reading.
Still no luck. I wonder how did oneplus team get band 40 and 41.
The problem is that after going nv setting via pc i did change code but still no luck.
In india Volte is on band 40 and band 41. As per knowledge 801 support both band.
Why cant i get to work.
If see the below attachment i have volte option but on my provider it work only band 40 and 41.
Then did add all Lte band as per post
" http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059 "
If you i have two option for band all at last.
Hi,
s5 g900I supports all the bandwith of jio acording to gsmaraena website....
but i ant get volte plz help
I know that g900i support that but we cant change g900f to g900i.
Already checked that
Salcykhan said:
I know that g900i support that but we cant change g900f to g900i.
Already checked that
Click to expand...
Click to collapse
Okey , is there any way to enable volte ,in g900i....currently I cant
It bought g900i.
You can try phonix rom with csc that has volte option.
I guess it will work for you since your bootloader support band 40.
Salcykhan said:
It bought g900i.
You can try phonix rom with csc that has volte option.
I guess it will work for you since your bootloader support band 40.
Click to expand...
Click to collapse
Can u give me the link please !! For the phonix ROM..please
---------- Post added at 03:11 PM ---------- Previous post was at 03:03 PM ----------
Arjun KalyanRam said:
Can u give me the link please !! For the phonix ROM..please
Click to expand...
Click to collapse
I found the link..but it says the ROM is for g900F is it safe to flash that ROM on G900I
Install TGY(HONG KONG) lollipop firmware on your 900F .you will get volte option in setting/more network/ mobile network/ volte toggle will be there and a volte toggle button in quick panel .
Also in marshmallow but not works try newer or older MM .volte works in all 3 bands as i tested in note4 901C which does'nt have band40 in JIO 4G
I had this problem for Years before. On the first day, I didn't even have signal in a well populated area with my network Three Ireland. Make sure your phone is set to the 4G/3G Option or even use 3G/2G when calling and switch to 4G when using Data. I'm pretty sure certain networks don't support VoLTE and so they don't do well when you try to configure your SIM on 4G. It should work if you use 3G or 2G. I updated to Marshmallow and this fixed the problem. When I go into the Settings of my SIM Card (Call Forwarding etc.), My phone switches to 3G or 2G and once I exit that menu it goes to 4G again. Not a complete fix but I figured it depends on the Network.
Gamesolc said:
I had this problem for Years before. On the first day, I didn't even have signal in a well populated area with my network Three Ireland. Make sure your phone is set to the 4G/3G Option or even use 3G/2G when calling and switch to 4G when using Data. I'm pretty sure certain networks don't support VoLTE and so they don't do well when you try to configure your SIM on 4G. It should work if you use 3G or 2G. I updated to Marshmallow and this fixed the problem. When I go into the Settings of my SIM Card (Call Forwarding etc.), My phone switches to 3G or 2G and once I exit that menu it goes to 4G again. Not a complete fix but I figured it depends on the Network.
Click to expand...
Click to collapse
Yes, volte only provided by some carriers like in india jio 4g .i saw some post that having problem while call that 4g network swicthes to 3g after call end back to 4g . Try to open android service menu and set lte/wcdma/gsm this might fix *#*#4636#*#* or use shotcut master app using root method
Bruh what about G900I
Somebody just flash this on G900I
http://forum.xda-developers.com/showpost.php?p=69918006&postcount=8693
As I spoke JIo Customer Care That I was able to Do Volte. They Said VOLTE work On band 40
LET SEE
ahmed333 said:
Install TGY(HONG KONG) lollipop firmware on your 900F .you will get volte option in setting/more network/ mobile network/ volte toggle will be there and a volte toggle button in quick panel .
Also in marshmallow but not works try newer or older MM .volte works in all 3 bands as i tested in note4 901C which does'nt have band40 in JIO 4G
Click to expand...
Click to collapse
As
Salcykhan said:
Somebody just flash this on G900I
http://forum.xda-developers.com/showpost.php?p=69918006&postcount=8693
Click to expand...
Click to collapse
Do u want me to flash phonix ROM on G900I bruh
its up to you coz . i had no luck with g900f. Even even after changing csc or trying to add band 40. But for g900i. I only two good ROM phonix and Omega.
Salcykhan said:
its up to you coz . i had no luck with g900f. Even even after changing csc or trying to add band 40. But for g900i. I only two good ROM phonix and Omega.
Click to expand...
Click to collapse
How to add CSC ....can u please show me
ahmed333 said:
Install TGY(HONG KONG) lollipop firmware on your 900F .you will get volte option in setting/more network/ mobile network/ volte toggle will be there and a volte toggle button in quick panel .
Also in marshmallow but not works try newer or older MM .volte works in all 3 bands as i tested in note4 901C which does'nt have band40 in JIO 4G
Click to expand...
Click to collapse
Can I flash TGY firmware of G900F on G900I ???
To get volte !
Can anyone tell me what firmware to flash to a dual sim variant s7 edge to get the wifi calling option for ee u.k.. I don't have the option to turn it on?
also trying to find out how to do this for an unlocked UK SG7e using a Three sim.
Ended up flashing the ee u.k. nougat firmware from the single sim . Works fine . I think you have to flash the 3 uk firmware and it will also optimize the network for 3 and give you the wifi calling option .
If you flash the UK generic version btu the ee Wi-Fi calling will work
Sent from my SM-G935F using XDA-Developers Legacy app
---------- Post added at 09:46 AM ---------- Previous post was at 09:45 AM ----------
fridaycider said:
Ended up flashing the ee u.k. nougat firmware from the single sim . Works fine . I think you have to flash the 3 uk firmware and it will also optimize the network for 3 and give you the wifi calling option .
Click to expand...
Click to collapse
That's correct that will allow volte however Wi-Fi calling is not supported three use a 3td party app that does not depend on the firmware of the handset
Sent from my SM-G935F using XDA-Developers Legacy app
Three added native wifi calling for the S7 with the Three Nougat firmware, so their third party app is longer required for supported phones.
http://www.three.co.uk/discover/Three_inTouch/android-wifi-calling
Hi Guys,
I'm almost happy user of XPZ. I bought non-branded version G1842 dual. I want to use VoLTE(and WiFiCalling if possible) on my handset. My operator Orange PL supporting VoLTE but only on Iphones and branded firmwares for Android phones.
Sony support/service refuse to flash my phone with Orange firmware - so I would need to do this alone but official Orange firmware is available only for single sim XPZ G8141.
Question - can I seftly flash G8142 with G8141 firmware? Or do you know that maybe VoLTE operator configuration is kept in one of sin files like modem_X-FLASH-ALL-42E5.sin and I could just swap one file in whole firmware folder?
Secondly VoLTE - I send email to operator and they replay that configuration of VoLTE is many settings/parameters inside firmware. Besides *#*#4636#*#* option VoLTE provisioning I didn't see any configuration for this service. The config is so deeply inside firmware? When I switch ON this option in that menu it's not saved and when I enter once again the menu is one again switched off.
What I saw most of the VoLTE arround globe have problem - that they need to use branded firmware. Do you think in the future it would change? As far as I check for Iphone it works on all - it's relevant it's branded or non-branded phone.
best regards,
Piotr
I'm in Sweden and VoLTE got enabled for me when I switched carrier. I didn't do anything but switch SIM. I had a Z5 Premium at the time and now I'm on a XZ Premium and VoLTE is enabled as default.
And standard Nordic Combined firmware, no carrier lock.
Piotr, i think with DS version of device you are out of luck. There is no european provider specific modem configuration(required for volte) available for the dual sim device. I have attached available configurations in the zip file.
To get single sim modem configuration files flashed to device, you need to flash system.sin, but i STRONGLY DO NOT recommend doing that. Potential brick on your way.
Mixing flashing the single sim and dual sim different .sin files is highly experimental.
If you really want VoLTE then i think less headache is if you can find a person who is willing to switch single sim version with you.
You can get any region G8141 and then flash https://xpericheck.com/cda/1308-7002
Phone needs load configuration amss_fsg_maple_orange_poland_volte_vowifi_tar.mbn to get VoLTE and VoWIFI.
Checking current oem.sin file, i can see that when inserting Orange PL sim, then amss_fsg_maple_orange_poland_ims_tar.mbn is actually loaded.
Is the XZ Premium on confirmed VoLTE devices list on Orange Poland webpage?
Hello, any news in this thread? I have the same situation but with XZ1. I have nonbranding dual sim working on T-Mobile PL. They sell XZ1 only single sim, so there is only single SIM firmware from T-Mobile. Someone test flashing single SIM firmware for dual SIM XZ/XZ1 Xperia?
Should be same situation as with xz premium. flash single sim fw via newflasher and you are done. will lose 2nd sim but otherwise should be good.
Please Read different topics to know how other users have done it to xz premium dual sim.
VeixES said:
Should be same situation as with xz premium. flash single sim fw via newflasher and you are done. will lose 2nd sim but otherwise should be good.
Please Read different topics to know how other users have done it to xz premium dual sim.
Click to expand...
Click to collapse
Are dual sim variants of xz1 and xzp installed with the required 4x4mimo hardware antennas?
Just flashed XZ1 DUAL with XZ1 SINGLE firmware. Everything work at this time fine and VoLTE and VoWIFI are working from the start!
rafi.mv6 said:
Just flashed XZ1 DUAL with XZ1 SINGLE firmware. Everything work at this time fine and VoLTE and VoWIFI are working from the start!
Click to expand...
Click to collapse
You flashed tmobile PL firmware?
Stefanos1999 said:
You flashed tmobile PL firmware?
Click to expand...
Click to collapse
I haved CE1 DUAL (G8342) firmware and flashed with XZ1_G8341_8.0_47.1.A.2.281_T-Mobile
If someone want, I can send screenshot via PM with firmware version on the phone
rafi.mv6 said:
I haved CE1 DUAL (G8342) firmware and flashed with XZ1_G8341_8.0_47.1.A.2.281_T-Mobile
If someone want, I can send screenshot via PM with firmware version on the phone
Click to expand...
Click to collapse
All functions with single sim firmware work properly?
Phone now reports as g8341 (singles sim) to the mobile carrier?
What does now show in the model number of your device menu?
Stefanos1999 said:
All functions with single sim firmware work properly?
Phone now reports as g8341 (singles sim) to the mobile carrier?
Click to expand...
Click to collapse
I send you PM with screenshot. All functions work well from 8 hours. NFC, VoLTE, VoWIFI, caliing, messaging, LTE, 3G etc, no problem with anything at this moment.
In system information stay now G8341, and naturally i lost second SIM in menu.
rafi.mv6 said:
I send you PM with screenshot. All functions work well from 8 hours. NFC, VoLTE, VoWIFI, caliing, messaging, LTE, 3G etc, no problem with anything at this moment.
In system information stay now G8341, and naturally i lost second SIM in menu.
Click to expand...
Click to collapse
Great! Dualism is sold cheaper than singlesim
Stefanos1999 said:
Great! Dualism is sold cheaper than singlesim
Click to expand...
Click to collapse
Why dual sim are sold cheaper then singlesim? Which country?
I bought XZP in presale and price for non-brand and brand at telcos was the same. For me I was thinking it's benefit because I get dual sim and "clean" FW.
I suppose that Sony (and also Samsung) don't care about this....I hope that carrier services app in android recently added by Google would be the way to update settings for operators for all headsets. Like apple does. That would solve that configuration....
Only when small file missing and and lot of issues with VoLTE and VoWiFi.
lancewicz said:
Why dual sim are sold cheaper then singlesim? Which country?
I bought XZP in presale and price for non-brand and brand at telcos was the same. For me I was thinking it's benefit because I get dual sim and "clean" FW.
I suppose that Sony (and also Samsung) don't care about this....I hope that carrier services app in android recently added by Google would be the way to update settings for operators for all headsets. Like apple does. That would solve that configuration....
Only when small file missing and and lot of issues with VoLTE and VoWiFi.
Click to expand...
Click to collapse
Maybe single and dual sim are exactly the same HW? and when you load DS FW into SS version you will get DS? anyway 2sim share slot with SD ...maybe Sony simply manufacturing process?
VeixES said:
Piotr, i think with DS version of device you are out of luck. There is no european provider specific modem configuration(required for volte) available for the dual sim device. I have attached available configurations in the zip file.
To get single sim modem configuration files flashed to device, you need to flash system.sin, but i STRONGLY DO NOT recommend doing that. Potential brick on your way.
Mixing flashing the single sim and dual sim different .sin files is highly experimental.
If you really want VoLTE then i think less headache is if you can find a person who is willing to switch single sim version with you.
You can get any region G8141 and then flash https://xpericheck.com/cda/1308-7002
Phone needs load configuration amss_fsg_maple_orange_poland_volte_vowifi_tar.mbn to get VoLTE and VoWIFI.
Checking current oem.sin file, i can see that when inserting Orange PL sim, then amss_fsg_maple_orange_poland_ims_tar.mbn is actually loaded.
Is the XZ Premium on confirmed VoLTE devices list on Orange Poland webpage?
Click to expand...
Click to collapse
To confirm files like amss_fsg_maple_orange_poland_volte_vowifi_tar.mbn are kept in which file? oem_X-FLASH-ALL-42E5.sin or modem_X-FLASH-ALL-42E5.sin ?
This file are modem configuration so it should be more in modem.sin but you mention that you check oem.sin for that maple config?
Is 100% configuration of VoLTE are kept in amss_fsg_maple_orange_poland_volte_vowifi_tar.mbn ?
In 20 minutes I would also try to flash XZP like rav.6 with XZ1 to check that solution. And let all know.
br,
Piotr
oem.sin only includes instructions which configuration(.mbn) to load.
all configuration are universally available in system.sin
lancewicz said:
To confirm files like amss_fsg_maple_orange_poland_volte_vowifi_tar.mbn are kept in which file? oem_X-FLASH-ALL-42E5.sin or modem_X-FLASH-ALL-42E5.sin ?
This file are modem configuration so it should be more in modem.sin but you mention that you check oem.sin for that maple config?
Is 100% configuration of VoLTE are kept in amss_fsg_maple_orange_poland_volte_vowifi_tar.mbn ?
In 20 minutes I would also try to flash XZP like rav.6 with XZ1 to check that solution. And let all know.
br,
Piotr
Click to expand...
Click to collapse
I can confirm. Solution by rav.6 is working also on XZP with Orange firmware Poland.
I see now options for VoLTE and VoWiFi and VoLTE are enable but not working
I don't know why
lancewicz said:
I can confirm. Solution by rav.6 is working also on XZP with Orange firmware Poland.
I see now options for VoLTE and VoWiFi and VoLTE are enable but not working
I don't know why
Click to expand...
Click to collapse
In T-Mobile I have activated VoLTE and VoWIFI by sending message to T-Mobile. I don't know how it looks in Orange, but i think you must activate it first.
VeixES said:
oem.sin only includes instructions which configuration(.mbn) to load.
all configuration are universally available in system.sin
Click to expand...
Click to collapse
So what is in modem_X-FLASH-ALL-42E5.sin ?
lancewicz said:
So what is in modem_X-FLASH-ALL-42E5.sin ?
Click to expand...
Click to collapse
Generic modem/radio needed files, which are needed for the modem to work. Identical in every region firmware.
Hi, just bought a G955u1, unlocked, been reading lots of posts but im confused, my phone is working on att with my old sim, but wifi calling is not there, can i flash my phone to a locked att firmware so all the att features will be working? i have odin and a choice of files but need to flash the correct one, my current csc reads OYM, thanks
brycey2020 said:
Hi, just bought a G955u1, unlocked, been reading lots of posts but im confused, my phone is working on att with my old sim, but wifi calling is not there, can i flash my phone to a locked att firmware so all the att features will be working? i have odin and a choice of files but need to flash the correct one, my current csc reads OYM, thanks
Click to expand...
Click to collapse
No. Att does not support byod wifi calling or volte. Even with the proper firmware att does not have the device in their database and will not support it
In the future please post questions on q and a
---------- Post added at 11:11 PM ---------- Previous post was at 11:10 PM ----------
On a further note. Oym is multi carrier. It will personalize the device based on the carrier sim inserted