Hi.
flashing other regional countries new firmware has failed by Odin on G530H ! it has (G530HXXU1ANL4) firmware installed and i want to upgrade to new ( G530HXCU1AOA2) firmware , but its failed by Odin at starting of installing . what's the problem of it ?
best regards
shahi.persian said:
Hi.
flashing other regional countries new firmware has failed by Odin on G530H ! it has (G530HXXU1ANL4) firmware installed and i want to upgrade to new ( G530HXCU1AOA2) firmware , but its failed by Odin at starting of installing . what's the problem of it ?
best regards
Click to expand...
Click to collapse
did you find solution i have same problem and can't flash any way
ahwak said:
did you find solution i have same problem and can't flash any way
Click to expand...
Click to collapse
Yes , in Persian forums , they said you should install same base code , for example you can install firmwares with same XXU or XCU and you can't flash XCU on XXU or other same situations . it may be cause of Knox or other security reasons or ... on new Galaxy devices
because there isn't new middle east firmware of my device base code , i can't try and don't know if it works or not
shahi.persian said:
Yes , in Persian forums , they said you should install same base code , for example you can install firmwares with same XXU or XCU and you can't flash XCU on XXU or other same situations . it may be cause of Knox or other security reasons or ... on new Galaxy devices
because there isn't new middle east firmware of my device base code , i can't try and don't know if it works or not
Click to expand...
Click to collapse
Where did u see the base code of firmware?
I am indonesian and I rooted my prime in a week after i bough it (box says made in vietnam), in next month after i rooted my phone a friend said theres an software update but of course i cannot update my prime software because rooted but my friend said i can manually update my firmware by manual flash and he recommended me to look the latest released firmware on sammobile.
First i downloaded latest firmware for indonesian region and flashed it,.. result FAIL (AUTH)
and my friend said try another firmware,.. then i downloaded kazakhstan firmware i flashed it and it WORKED, it was on february..
Early march my friend said it was an another software update and this time i tried indonesian region again at first try and it worked..
So where i can find the firmware base code? because i flashed my phone with kazakhstan firmware then i tried indonesian region it worked also,..
I was gonna give u direct link to sammobile firmware i tried but xda not allow it, so theres the detail
KAZAKHSTAN firmware on feb, work for me:
Model SM-G530H
Model name GALAXY Grand Prime
Country Kazakhstan
Version Android 4.4.4
Changelist 372462
Build date Tue, 27 Jan 2015 13:04:29 +0000
Product code SKZ
PDA G530HXXU2AOA3
CSC G530HOXE2AOA1
INDONESIAN firmware on march, worked also for me:
Model SM-G530H
Model name GALAXY Grand Prime
Country Indonesia
Version Android 4.4.4
Changelist 430802
Build date Thu, 05 Mar 2015 06:53:03 +0000
Product code XSE
PDA G530HDXU2AOC2
CSC G530HOLB2AOC1
pardon my english
I2on4ld said:
Where did u see the base code of firmware?
I am indonesian and I rooted my prime in a week after i bough it (box says made in vietnam), in next month after i rooted my phone a friend said theres an software update but of course i cannot update my prime software because rooted but my friend said i can manually update my firmware by manual flash and he recommended me to look the latest released firmware on sammobile.
First i downloaded latest firmware for indonesian region and flashed it,.. result FAIL (AUTH)
and my friend said try another firmware,.. then i downloaded kazakhstan firmware i flashed it and it WORKED, it was on february..
Early march my friend said it was an another software update and this time i tried indonesian region again at first try and it worked..
So where i can find the firmware base code? because i flashed my phone with kazakhstan firmware then i tried indonesian region it worked also,..
I was gonna give u direct link to sammobile firmware i tried but xda not allow it, so theres the detail
KAZAKHSTAN firmware on feb, work for me:
Model SM-G530H
Model name GALAXY Grand Prime
Country Kazakhstan
Version Android 4.4.4
Changelist 372462
Build date Tue, 27 Jan 2015 13:04:29 +0000
Product code SKZ
PDA G530HXXU2AOA3
CSC G530HOXE2AOA1
INDONESIAN firmware on march, worked also for me:
Model SM-G530H
Model name GALAXY Grand Prime
Country Indonesia
Version Android 4.4.4
Changelist 430802
Build date Thu, 05 Mar 2015 06:53:03 +0000
Product code XSE
PDA G530HDXU2AOC2
CSC G530HOLB2AOC1
pardon my english
Click to expand...
Click to collapse
Hi. Yes our device are made in Vietnam , but regional Codes are different because of regional languages and some other regional settings.
it has (G530HXXU1ANL4) firmware installed and i want to upgrade to ( G530HXCU1AOA2) or newer one for our regional (middle east) , but base code in here installed firmware is (XXU) and (XCU) of new firmware (look at G530HXXU1ANL4 and also G530HXCU1AOA2) . we can't install XCU on XXU firmware of device and we see fail notification in Odin at start of flashing . but these are for middle east and Persian support firmware and i don't know for other regional , for example we can use some other regional but there isn't our language in that regional firmware , So we have to wait for releasing new firmware for our regional base code
good luck
dear ronald.. ane indonesia juga
so if you want to upgrade Indonesian version (march) , first must Khazakstan firmware ?!
I2on4ld said:
Where did u see the base code of firmware?
I am indonesian and I rooted my prime in a week after i bough it (box says made in vietnam), in next month after i rooted my phone a friend said theres an software update but of course i cannot update my prime software because rooted but my friend said i can manually update my firmware by manual flash and he recommended me to look the latest released firmware on sammobile.
First i downloaded latest firmware for indonesian region and flashed it,.. result FAIL (AUTH)
and my friend said try another firmware,.. then i downloaded kazakhstan firmware i flashed it and it WORKED, it was on february..
Early march my friend said it was an another software update and this time i tried indonesian region again at first try and it worked..
So where i can find the firmware base code? because i flashed my phone with kazakhstan firmware then i tried indonesian region it worked also,..
I was gonna give u direct link to sammobile firmware i tried but xda not allow it, so theres the detail
KAZAKHSTAN firmware on feb, work for me:
Model SM-G530H
Model name GALAXY Grand Prime
Country Kazakhstan
Version Android 4.4.4
Changelist 372462
Build date Tue, 27 Jan 2015 13:04:29 +0000
Product code SKZ
PDA G530HXXU2AOA3
CSC G530HOXE2AOA1
INDONESIAN firmware on march, worked also for me:
Model SM-G530H
Model name GALAXY Grand Prime
Country Indonesia
Version Android 4.4.4
Changelist 430802
Build date Thu, 05 Mar 2015 06:53:03 +0000
Product code XSE
PDA G530HDXU2AOC2
CSC G530HOLB2AOC1
pardon my english
Click to expand...
Click to collapse
shahi.persian said:
Hi. Yes our device are made in Vietnam , but regional Codes are different because of regional languages and some other regional settings.
it has (G530HXXU1ANL4) firmware installed and i want to upgrade to ( G530HXCU1AOA2) or newer one for our regional (middle east) , but base code in here installed firmware is (XXU) and (XCU) of new firmware (look at G530HXXU1ANL4 and also G530HXCU1AOA2) . we can't install XCU on XXU firmware of device and we see fail notification in Odin at start of flashing . but these are for middle east and Persian support firmware and i don't know for other regional , for example we can use some other regional but there isn't our language in that regional firmware , So we have to wait for releasing new firmware for our regional base code
good luck
Click to expand...
Click to collapse
Did you tried to flash another firmware region from sammobile? because on first firmware update on feb, i tried kazahkstan region and it worked for me in first try flash,.. and on 2nd update on early march i tried indonesian region but it also worked for me in first try flash
Few suggestion says try another computer or another USB slot to connect our device, but i cant make sure that is the problem
gundam70 said:
dear ronald.. ane indonesia juga
so if you want to upgrade Indonesian version (march) , first must Khazakstan firmware ?!
Click to expand...
Click to collapse
I am not directly suggest to flashed kazakhstan firmware first so you can flash the device with indonesian region mate, because i tried both and it worked,... but if u wanna consult with another indonesian expert u can try join and post on samsung galaxy grand prime group in facebook, maybe and i hope u can get a hint
I2on4ld said:
Did you tried to flash another firmware region from sammobile? because on first firmware update on feb, i tried kazahkstan region and it worked for me in first try flash,.. and on 2nd update on early march i tried indonesian region but it also worked for me in first try flash
Few suggestion says try another computer or another USB slot to connect our device, but i cant make sure that is the problem
Click to expand...
Click to collapse
No , because i want to have Persian language in firmware , So i have to wait for new firmware releasing for middle east with same base code of device base code
finally Samsung released Iran firmwares for its devices , also for Grand Prime too :Here's the link :
http://www.sammobile.com/firmwares/database/SM-G530H/THR/
shahi.persian said:
finally Samsung released Iran firmwares for its devices , also for Grand Prime too :Here's the link :
http://www.sammobile.com/firmwares/database/SM-G530H/THR/
Click to expand...
Click to collapse
thanks for sharing I have a SM-G530H/DS phone state: in recovery mode got MMC: mmc_read fail movinand checksun confirmation fail, it can enter download mode but odin shows error and wont flash it, it can´t either flash recovery nor root nothing
is there anything we can try in order to repair it?
TIA
fabian108 said:
thanks for sharing I have a SM-G530H/DS phone state: in recovery mode got MMC: mmc_read fail movinand checksun confirmation fail, it can enter download mode but odin shows error and wont flash it, it can´t either flash recovery nor root nothing
is there anything we can try in order to repair it?
TIA
Click to expand...
Click to collapse
you have any solution for this??
I'm also need Galaxy Grand Prime G530H/DS Firmware
I'm also need to download Samsung Galaxy Prime G530H/DS firmwar.
Pls, help me.
Hi.
flashing other regional countries new firmware has failed by Odin on G530H ! it has (G530HXXU1ANL4) firmware installed and i want to upgrade to new ( G530HXCU1AOA2) firmware , but its failed by Odin at starting of installing . what's the problem of it ?
best regards
---------- Post added at 04:34 AM ---------- Previous post was at 04:30 AM ----------
KAZAKHSTAN firmware on feb, work for me:
Model SM-G530H
Model name GALAXY Grand Prime
Country Kazakhstan
Version Android 4.4.4
Changelist 372462
Build date Tue, 27 Jan 2015 13:04:29 +0000
Product code SKZ
PDA G530HXXU2AOA3
CSC G530HOXE2AOA1
tkanks set ok so if you want to upgrade Indonesian version (march) , first must Khazakstan firmware ?!
shahi.persian said:
Hi.
flashing other regional countries new firmware has failed by Odin on G530H ! it has (G530HXXU1ANL4) firmware installed and i want to upgrade to new ( G530HXCU1AOA2) firmware , but its failed by Odin at starting of installing . what's the problem of it ?
best regards
Click to expand...
Click to collapse
which rom now you using
i have model number g530a ud or ez works can u find 4.4.4 or firmware or way to by pass it
It just happened to me, when upgrade over the air and it different on PDA/Baseband , such G350HXCUxxxx then your country G350HXXUxxx, it will be failed and guest what : you're still on last firmware (4.4.4) but your wifi become doesn't work!
So I tried re-flash by odin, and still failed!
The soulution is look at about phone > baseband (PDA), then find one a simillar PDA here : http://www.sammobile.com/firmwares/database/SM-G530H/
If your baseband is G350HXCUxxx, you have to download G350HXCUxxx too (no matter what it's from another country/carrier).
Then flash your new firmware by odin. Done! You're on Android 5.0.2 Lollipop!
unable to flash 5.0.2 stock ROM
phone is network locked, the only custom Rom that works via recovery mode installation is MIUI. All other 5.0.2 custom rom's installed via recovery fails to boot.
Odin fails to flash 5.0.2 stock ROM, it fails while writing at the very beginning itself
is this normal?
do i need to update kernel and recovery to be able to flash 5.0.2
smartswitch does not detect 5.0.2 upgrade though it is available offline for download (sammobile)
need to find if there is a software method for network lock removal
Update: was able to flash 5.0.2 stock ROM via ODIN but it worked only for a specific region (SKZ) firmware, still there is an issue of not being able to install custom ROM's will give it a try again
Buenas, compre un Samsung Grand Prime (G530H/DS), con error de encriptado pensando que podia repararlo con un recovery o con odin, pero nada!, he descargado ya como 5 firmware y odin siempre me da "fail", dice error del PIT, e utilizado KIES y hasta intente RSD Lite; tampoco entra en recovery para hacer wipe, por ningun lado de lo que he probado me funciona, que puedo hacer?? Aqui le dejo uno de los intentos y lo que parece ...
uploads.disquscdn.com/images/c91a22229bc37605b1c63b35c8858a70c37a0b1c2898f3c8e764d40db4349f45.jpg
hi
I had problems during reflash n9005 before.
i had version N9005XXUFNG2 and wanted to update to Poland XEO version N9005XXUEND3. Somebody reply me i can use it and i almost kill my note3 during flash.
Then somebody explain i cant downgrade from NG2 to ND3 so i reflash back to correct version and let i to wait.
question 1:
my current firmware is N9005XXUGNG1_N9005ATOGNG1_N9005XXUGNG1_HOME.tar.md5, phone is probably from Austria A1 network (i bought it in local store with papers)
now there is update to android 5.0. Of course i got info and tried to update phone via wifi but after it download firmware (over 810mb) during recovery flash it end at 29% with ERROR message than suggest to use KIES so can i now use POLAND XEO firmware:
Code:
Model SM-N9005
Model name GALAXY Note 3 LTE
Country Poland
Version Android 5.0
Changelist 3643614
Build date Wed, 25 Feb 2015 12:57:23 +0000
Product code XEO
PDA N9005XXUGBOB6
CSC N9005XEOGBOA4
links are here:
Code:
http://www.sammobile.com/firmwares/download/43864/N9005XXUGBOB6_N9005XEOGBOA4_XEO/
http://www.sammobile.com/firmwares/download/43186/N9005XXUGBOA5_N9005XEOGBOA4_XEO/
if YES, which file should i use B6 or A5 (i think B6 but update from Austria A1 for n9005 is A5)?
question 2:
my second N9005 is problably from Ireland Meteor still with 4.4.2 currect: N9005XXUENC2_N9005METENB1_N9005XXUENC2_HOME.tar.md5
Can i now update to 5.0 Poland XEO from same upper links version B6 or A5 ?
1 yes
2 yes
BOB6
Hi,
I'm in Qatar and I've SM-N9005 with Baseband N9005XXUGNG1. Can I flash official update firmware from other countries like Saudi Arabia with firmware N9005XXUGBOEA?
I would really appreciate if someone could give me link to some kind of tutorial on reading firmware compatibility issues.
Regards
alighilzai said:
Hi,
I'm in Qatar and I've SM-N9005 with Baseband N9005XXUGNG1. Can I flash official update firmware from other countries like Saudi Arabia with firmware N9005XXUGBOEA?
I would really appreciate if someone could give me link to some kind of tutorial on reading firmware compatibility issues.
Regards
Click to expand...
Click to collapse
I have been trying to find an answer to this for a long while, but I just can't. There are some ROMs which are meant for 32 GB devices, and then there are some ROMs which are meant for 16 GB devices. If you download a ROM which is meant for 16 GB Note 3, then obviously you won't be able to flash it on a 32 GB Note 3. And the firmwares listed on sammobile.com don't say which are which!
So I have given up, when a new base pops up, I simply head over to the Alexandar's topic to see whether he has complied the newer version or not, and he does that so fast. That is as stock as a ROM can get, other than ROMs from sammobile.com, so I don't really bother any more.
Here is the link for latest j700f ins (indian firmware)
Model SM-J700F
Model name Galaxy J7
Country India
Version Android 6.0.1
Build date Mon, 08 May 2017 13:35:11 +0000
Security Patch Level 2017-05-01
Product code INS
PDA J700FXXU4BQE3
CSC J700FODD4BQE1
Latest update 21/06/2017
Link is here
https://drive.google.com/file/d/0B6rodr3hdHyaTnVzVTdKdkx3eTA/view?usp=drivesdk
Thanks to sammobile.com for firmware
Thank u very much worked for me
did you know if the firmware support spanish lenguage ? i need bit 4 firmware with spanish
Thanks
Thanks a lot brother
Worked Great
G-Apps?
What g-apps did you use? Can you send me a link? Thanks man
J700f 2015
I'm Gerard from Chenna Indiai. Deaf person. My mobile version j700fxxu4brd1. Samsung j7 2015
I need correct download link 8.1 oreo
And gapsps
Please help
Gerardwilcox said:
I'm Gerard from Chenna Indiai. Deaf person. My mobile version j700fxxu4brd1. Samsung j7 2015
I need correct download link 8.1 oreo
And gapsps
Please help
Click to expand...
Click to collapse
mobile 9789024608 WhatsApp
How to install firmware of sm-j700t on sm-j700f?
Hi, I install the firmware in sm j701F After that LTE not working... any solution
Hello xda.
Ive got a question ive been looking an answer for everywhere and still havent been able to find a clear one.
I have a J7 2017 SM-J730G. Its made in Vietnam. When i bought it it had an english firmware on it which i suppose was from Vietnam. After some time it started having random reboots so i flashed it with odin. I flashed the 4 files included in the firmware package. But the firmware was from Panama with csc TPA. Its a latin firmware. I would like to have the original firmware back on my phone however when i try flashing the Vietnam firmware with odin it fails. Does anyone know why it fails if its for the exact model that i have?
This is the one that fails.
Galaxy J7 Pro SM-J730G 7.0 JULY 12, 18
Vietnam (XXV)
J730GDXU4ARF5
This is the one i have on it now.
Galaxy J7 Pro SM-J730G 7.0 JULY 18, 18
Panama (TPA)
J730GUBU4ARF1
Do you guys think that if i flash just the system of the vietnam and not the bootloader nor the csc it would work and would i have any problems by doing that?
you can
Chimpzilla said:
This is the one that fails.
Galaxy J7 Pro SM-J730G 7.0 JULY 12, 18
Vietnam (XXV)
J730GDXU4ARF5
This is the one i have on it now.
Galaxy J7 Pro SM-J730G 7.0 JULY 18, 18
Panama (TPA)
J730GUBU4ARF1
Do you guys think that if i flash just the system of the vietnam and not the bootloader nor the csc it would work and would i have any problems by doing that?
Click to expand...
Click to collapse
skip the bl file just put the ap and csc of vietnam it will work if not tnen try by unlocking the oem unlock.you can find oem unlock in developer option.
Rom Combination for Samsung Galaxy A20 (SM-A205) Download Google Driver max speed speed (no ads)
DOWNLOAD
1. Samsung Galaxy A20 (SM-A205F)
COMBINATION_FAC_FA90_A205FDDU1ASD3.rar (832M)
COMBINATION_FAC_FA90_A205FDDU1ASC2.rar (852M)
2. Samsung Galaxy A20 (SM-A205FN)
COMBINATION_FAC_FA90_A205FDDU1ASD3.rar (832M)
COMBINATION_FAC_FA90_A205FDDU1ASC2.rar (852M)
3. Samsung Galaxy A20 (SM-A205G)
Updating …
4. Samsung Galaxy A20 (SM-A205GN)
COMBINATION_FAC_FA90_A205GNDXU1ASC4.rar (794M)
GUIDE
Instructions for using Odin to upgrade, downgrade, original rooting, root, recovery for Samsung devices
Thanks, but We a wait TWRP and Project Treble, you don't know who can help with that?
I've contacted Mike Channon from xda and he told me that we need 40 to 60 threads before we get our own forum.
Collected here. https://forum.xda-developers.com/t/samsung-galaxy-a20
---------- Post added at 10:06 PM ---------- Previous post was at 10:05 PM ----------
SetOfLetter said:
Thanks, but We a wait TWRP and Project Treble, you don't know who can help with that?
Click to expand...
Click to collapse
I sent a request for twrp but no reply as yet.
Hi All, I just purchased the Samsung A20 205G and would like to know if there is a way to change the firmware to A205U (T-mobile). I have downloaded the A205U firmware and used Odin3.1.3 to upgrade the firmware but it kept on failing. The message I got is: Custom Bindary Blocked by OEM lock. I am not sure what is going on. Could someone please give me some information on how to upgrade the firmware?
Thanks,
DT
DuckieTom said:
Hi All, I just purchased the Samsung A20 205G and would like to know if there is a way to change the firmware to A205U (T-mobile). I have downloaded the A205U firmware and used Odin3.1.3 to upgrade the firmware but it kept on failing. The message I got is: Custom Bindary Blocked by OEM lock. I am not sure what is going on. Could someone please give me some information on how to upgrade the firmware?
Thanks,
DT
Click to expand...
Click to collapse
Wont work. It has been blocked by samsung
Samsung Galaxy A20 SM-A205FN/DS Repair Firmware download
Device name: Samsung Galaxy A20
Model Number: SM-A205FN/DS
Region Code / Multi CSC: OXM - The Commonwealth of Independent States (CIS)
SM-A205FZBVCAC Uzbekistan, SM-A205FZRVCAU Caucasus Countries, SM-A205FZKVCAC Uzbekistan, SM-A205FZKVSER Russia, SM-A205FZKVSEK Ukraine, SM-A205FZRVSKZ Kazakhstan, SM-A205FZKVBTU United Kingdom, SM-A205FZKVTSI Ireland.
PDA: A205FNXXU2ASH1
CSC Modem: A205FNXXU2ASF1
Security Patch Level: 2019-08-01
Build Date: Fri, August 02, 2019
OS: Android 9.0 Pie
file Name: A205FNOXM2ASH1-APBLCPCSCHOME.zip (included Full stock rom factory firmware for Odin Flash AP, CP, BL, CSC, HOME)
Download
List A205FNOXM2ASH1-APBLCPCSCHOME.zip
A20_SWA_OPEN.pit
AP_A205FNXXU2ASH1_CL16139119_QB25216317_REV00_user_low_ship_meta_OS9. tar.md50_QB25128537_REV00_user_low_ship_meta_OS9.tar.md5
CP_A205FNXXU2ASF1_CL1182896_QB12892295_SIGNED.tar.md5
BL_A205FNXXU2ASH1_CL16139119_QB25216317_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OXM_A205FNOXM2ASH1_CL16139119_QB25216317_REV00_user_low_ship.tar.md5
CSC_OMC_OXM_A205FNOXM2ASH1_CL16139119_QB25216317_REV00_user_low_ship.tar.md5
DuckieTom said:
Hi All, I just purchased the Samsung A20 205G and would like to know if there is a way to change the firmware to A205U (T-mobile). I have downloaded the A205U firmware and used Odin3.1.3 to upgrade the firmware but it kept on failing. The message I got is: Custom Bindary Blocked by OEM lock. I am not sure what is going on. Could someone please give me some information on how to upgrade the firmware?
Thanks,
DT
Click to expand...
Click to collapse
You can root the G but not the U
Does anyone have combination rom but i'm looking for binary 4
zeromant said:
Does anyone have combination rom but i'm looking for binary 4
Click to expand...
Click to collapse
GSIs are available, but I don't know if a combination ROM.