Hello guys please help me, I am On latest official lollipop . I am trying to root my device and try to install twrp recovery flash, suddenly recovery got a error:crying:, Now I am on Lollipop My stock and twrp recovery is gone, i am not able to boot into recovery option, Just Yu logo come and mobile gets switch off. I think i got soft brick my device. but i Am able to go to fastboot mode?. I hear that cant flash cm11 after cm12 update so i cant go back to cm11, Just tell me friends what to do?
- if i have to flash again stock cm12 recovery? to get recovery option? If yes then please some one provide me cm 12 stock recovery
- if i have to flash cm12 how can i flash? via flashtool? but no firmware cm12 available right now
Help Guys
reply
reply Guys please:crying:
Have a look at this thread at YU - http://forums.yuplaygod.com/threads...6-0-for-yureka-arm64-flashable-lollipop.8630/
If you can enter fastboot mode, you can simply flash the TWRP recovery and then do root your phone. You can even try factory reset and see if you can boot again into your ROM. If can't, then you would need to flash whole CM12S ROM via fastboot mode. Here is the link for the CM12S ROM to be flashed in fastboot mode only -
http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-signed-fastboot.zip
Warning : Do not even dare to think to go back to or use anything from CM11s. Hit thanks if it helped. Good luck!
been there, and recovered.
this is what I think you need to do to recover:
download
1) dr ive .google . com/file/d/0B0_IwOvcRE4gcnNHcF9wNDcxRGs/view
2) docs. google. com/file/d/0B0_IwOvcRE4gcUpnSmVjdDAzOE0/view
3) drive. google. com/file/d/0ByDCheN6iyw0WEpveWJoTnRiWnc/view
Steps to follow:
1) extract zip (1) and (2) in the same folder
2) power off your phone completely- if in doubt, pull out and reinstall battery.
3) place zip (3) in the root of your sd card of phone, and put the sd card back into the phone.
4) connect the phone in fastboot mode, and run "flash-all.bat"
(If it asks you to unlock your bootloader, do so by following the onscreen instructions.)
5) after process is complete, power on your phone after disconnecting.
6) let it boot up for a while, say 20 mins. this step may be skipped.
7) boot into recovery mode, and click on apply update.
8) navigate to the folder with zip (3) in it, and apply it.
9) if it gives an error, wipe cache and retry.
10) after process finishes, power on phone and let it welcome you to lollipop.
cheers!
Hi,
After installing "[root] CF.lumen" of Chainfire on YU Yureka (CM11), phone get bricked. I did normal installation of this app, and after reboot my phone never returned normal. Each time I start, it get stuck in bootloop and all I am getting is logo of YU with Powered by Android written at the bottom of it.
I did not understand the reason of this soft brick with this application, can anybody help me to fix my YU yureka so that I can reuse it OR it just got damaged ??
So far I have tried flashing it with the following steps, but none of the methods worked: ->
Method 1: http://www.thetechnotriad.com/393/how-to-unbrick-yu-yureka/
Steps To Flash Factory Firmware –
Extract the flashtools zip in a new folder on the desktop.
Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
The command window will automatically close once the procedure is completed.
Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Method 2 : http://forum.xda-developers.com/yureka/orig-development/rom-t3042384
How To Install:
i) Place the ROM zip in the device.
ii) Reboot to your Custom Recovery CWM/TWRP/Philz.
iii) Wipe Cache, Data and System.
iv) Install the ROM Zip .
v) No need to flash Gapps, Gapps already present in system by default.
vi) The system is unrooted as its unmodified, so you might wanna install SuperSU for root access. Download and intall SuperSU.
LINK: SuperSU
vii) Reboot.
:crying::crying::crying::crying:
Please please help me to recover my phone, I would really appreciate your help.
Hi guys
So, i've been at this for most part of today. Looked all around and tried everything i found, and im still clueless.
I've done this steps twice, with the second time being more step-by-step instead of bulk actions, always starting from miui 8 global stable rom:
1 - flash twrp via fastboot with twrp-installer.bat for redmi 3s
2 - reboot into stock bootloader with power + vol+ and choose recovery to boot into twrp
3 - in twrp, slide to modify system and disable dm-verity in advanced options
4 - reboot into stock rom and power off phone
5 - boot into twrp in the same way as in step 2
6 - clean dalvik, system, data and cache partitions
7 - flash lineageos 13 from lsferreira and gapps
8 - reboot into custom rom and power off phone
9 - try to boot into twrp in the same way as in step 2 - NOK, just gets stuck at the MI logo
10 - reboot into custom rom and reboot into recovery from the power menu, twrp OK
11 - flash something, like goodix fix or xposed
12 - reboot into custom rom, verify installed packages OK
From this point on, i can not get back into recovery, either stock bootloader or twrp. Tried from the power menu, vol+ button, reflashing twrp through fastboot and adb, booting directly from recovery.img from fastboot and even reflashing stock recovery. The rom always boots fine and so does fastboot.
I saw some posts saying to hold both vol- and vol+, but this just seems to boot the phone in some deep recovery mode, judging by the drivers that the PC tries to install (EDL maybe?)
The only way i can get the bootloader/recovery (the vol+ chinese menu) back is to reflash stock miui 8 through miflash tool, which gets me to the starting line.
Will anyone be kind enough to point me to the blatantly obvious mistake im making?
I think I found a solution. I flashed a different twrp recovery (the one provided by fedosis, by cofface) instead of the one linked in every how-to in both this and miui's forums.
Now i can boot to recovery everytime.
This is a much easier way to flash a new recovery and custom roms. Besides using a PC / USB cable for unlocking the bootloader, all the process can be done straight from your device.
IMPORTANT: This procedure is only valid for LG G6 H872. Other G6 variants will end up bricked. All partitions will be wiped, this means that all the files needed must be saved to your external SD. It’s been tested with 20g firmware.
Prerequisites:
LG G6 device with original Oreo 20g firmware and fully charged
External SD card
Download and install su98.apk, Root Checker and Flashify
Download this specific TWRP version and save it to your external SD
Download Magisk and save it to your external SD
(Optional) Download latest TWRP to flash A10+ custom roms and save it to your external SD
0. Backup everything
1. Unlock your bootloader, otherwise you will brick your device. You can follow this guide.
2. Disable Google Play Protect (from PlayStore) or you won't be able to go on with the next step
3. Install su98.apk, open it and tap INSTALL NOW (leave the checkbox blank)
4. Install Root Checker and open it to verify that your device is rooted
5. Install Flashify and open it to flash TWRP (recovery_h872_20180813-1.img)
6. Turn off the phone (at this point, if the phone boots to Android you will have to start over from step 3).
7. Reboot into recovery (press and hold Volume Down and Power buttons together for a few seconds. When the LG logo appears, release the Power button while keep pressing the Volume Down and then press the Power button once more. Once you see a white screen, use Volume keys to choose "Yes" and Power button to select the option, you will have to press “Yes” twice).
8. Once in TWRP (be patient, takes some time to load) a “decrypt data” legend will appear. Press cancel. Then swype to allow system modifications. After that, go to Wipe / Format data and confirm by typing yes.
You are now able to flash any Stock ZIP (not KDZ). If this is your choice, remember to flash Magisk after flashing the ROM. If you want to flash any other custom ROM, jump to the next step.
9. Still in TWRP, flash Magisk to keep your device rooted
10. Flash the latest TWRP. Go to reboot options and tap Recovery
11. Once in the new TWRP, wipe system, data, dalvik, cache
12. Flash Rom + Gapps + Magisk and reboot to system
VIDEOS
Unlock bootloader LG G6 - H872
Root LG G6 - H872 without PC
Special thanks to Man Stevo for sharing this!!
LG G6 H872 back to stock Oreo 20g
IMPORTANT: All partitions will be wiped, this means that you must backup everything otherwise you’ll lose everything stored in the phone.
Prerequisites:
LG G6 device fully charged
USB cable
LG Mobile driver installed
Patched LG UP installed in the right folder (otherwise your device will not be recognized)
LG G6 H872 latest Oreo firmware (20g)
0. Backup everything.
1. We are going to flash this using the patched LG UP. Place the files in C:\Program Files (x86)\LG Electronics\LGUP. You can't just unzip it anywhere and run it, it will not find the model file.
2. Boot to download mode (power off your Phone. Plug one end of the USB cable to PC and while holding the Volume Up button connect the other end of the cable to your device. Release the Volume button once the device boots into Download Mode. To exit the Download Mode, press and hold the Power button until the device reboots)
3. Open LG UP and wait until the device model is recognized. Then choose partition DL
4. Pick the H872 20g KDZ and click start / ok
5. You’ll now get a list of partitions to flash, check them all and click start / ok
6. You may get a warning about additional modified partitions. Ignore it, and click ok
7. When the process is finished, the device will reboot
If the progress bar reached 100% and the device got stuck in the pink bootanimation, follow these steps:
Unplug the device and turn it off by holding Volume Down + Power (keep holding them down until it turns off)
Once the device is off, press and hold Volume Down and Power buttons together for a few seconds. When the LG logo appears, release the Power button while keep pressing the Volume Down and then press the Power button once more. Once you see a white screen, use Volume keys to choose "Yes" and Power button to select the option, you will have to press “Yes” twice.
The phone will now restore factory defaults and reboot to system
IMPORTANT
In case camera crashes when opening or you get an IMS error, you'll have to flash H87211h_00_0406.kdz (same procedure as above from step 0 to 7, just changing step 4 where you need to pick H872 11h KDZ), reboot to system (until you finish the initial wizard) and then flash H87220g_00_1228.kdz (again, same procedure from step 0 to 7).
Reserved
Works like a charm. Thanks
FYI, Going back to full working stock need to return to Android 7 firmware 1st (H87211h_00_0406.kdz); otherwise, you will get camera and IMS error.
Questions:
Does SkyHawk Recovery support stock firmware as TWRP can't backup and restore stock properly.
e20140 said:
Works like a charm. Thanks
FYI, Going back to full working stock need to return to Android 7 firmware 1st (H87211h_00_0406.kdz); otherwise, you will get camera and IMS error.
Questions:
Does SkyHawk Recovery support stock firmware as TWRP can't backup and restore stock properly.
Click to expand...
Click to collapse
Worked here when getting back straight to stock 20g, but good to know for those with issues.
I didn't test any custom recovery to backup stock, so I don't know about that.
Thanks for reporting!
Has anyone else used this recently? I cannot get the phone to boot to recovery at step 7. I've tried:
1) press vol- and pwr until the LG logo appears, release power, and press it once more
2) same as 1) above, but pressing power button multiple times to get through the "your phone can't be checked for security stuff" warning
Both times, it just boots straight to Android.
EDIT: Using adb reboot recovery worked!
Yeah, it works @zolotiyeruki
Check the vídeo in the first post for more details with the whole procedure.
Anyone else get an antivirus warning for the su98.apk?
My AV indicates it has a trojan in it - Trojan:Script/Ulthar.A!ml
AmbientMix said:
Anyone else get an antivirus warning for the su98.apk?
My AV indicates it has a trojan in it - Trojan:Script/Ulthar.A!ml
Click to expand...
Click to collapse
To follow up on this, I believe it's flagged because it is the exploit to get root that is seeing.
So it seems it's getting recognized by the anti-virus correctly and it's the desired functionality of the .apk.
(Anyone feel free to chime in to correct this if it's inaccurate.)
AmbientMix said:
To follow up on this, I believe it's flagged because it is the exploit to get root that is seeing.
So it seems it's getting recognized by the anti-virus correctly and it's the desired functionality of the .apk.
(Anyone feel free to chime in to correct this if it's inaccurate.)
Click to expand...
Click to collapse
Exactly.
hello Magisk no longer provides a downloadable zip to flash with twrp. that and for some reason i cant seem to get twrp to stick after flashing ive followed the instructions as exactly except for not installing magisk via twrp. i tried to install magisk via the manager after flashing twrp the first time and wiping data after that i am givin the option to reboot to system which i tried first and was not able to boot back into twrp. after doing everything from step 1 to finish all over i tried staying to flash the latest twrp before returning to system but seeing as how i dont have any gapps or roms or a flashable zip for magisk i just rebooted to system after flashing and still could not return to twrp..... i need help how do i get twrp to stick around after reboot, and how am i supposed to install magisk properly without the flashable zip? i seem to need a copy of my current boot.img so i can patch it with magisk and flash it with fastboot, how do i do this?
jsjames7715 said:
hello Magisk no longer provides a downloadable zip to flash with twrp. that and for some reason i cant seem to get twrp to stick after flashing ive followed the instructions as exactly except for not installing magisk via twrp. i tried to install magisk via the manager after flashing twrp the first time and wiping data after that i am givin the option to reboot to system which i tried first and was not able to boot back into twrp. after doing everything from step 1 to finish all over i tried staying to flash the latest twrp before returning to system but seeing as how i dont have any gapps or roms or a flashable zip for magisk i just rebooted to system after flashing and still could not return to twrp..... i need help how do i get twrp to stick around after reboot, and how am i supposed to install magisk properly without the flashable zip? i seem to need a copy of my current boot.img so i can patch it with magisk and flash it with fastboot, how do i do this?
Click to expand...
Click to collapse
Download latest Magisk APK, rename it to ZIP and flash it through TWRP.
why am i even doing this
BASED ON G611F (TUR)
How to install:
Step 1: you will needing odin becouse you cant install it from your twrp (i tried installing it from twrp and it gaved an kernel error so odin is the best for now)
Step 2: select the recovery file as AP becouse AP contains recovery and others (it only has recovery soo it will not effect your custom rom)
Step 3: Go to options and close auto restart (optional)
Step 4: Reboot your phone to download mode and plug it to your pc
Step 5: Press start
Step 6: If you enabled auto restart; When it restarts press Vol Up and Home button for your recovery. If you didnt enabled auto restart; Press Vol down power and home button to restart your phone. After screen goes black. Press Power Vol Up and Home button
Bugs:
It will take longer to boot (idk why)
No sd card updates (still same with the j7 prime tur recovery)
Running graphics update will take longer than j7 prime (tur) recovery
you tell me
Os part is now android 9 soo you can port g611 software on to j7 primes ig?
anyway here is the download:https://drive.google.com/file/d/1k6tOPIkhtHWMj9EDdYuffSaiz-sipVcJ/view?usp=share_link