The S7 edge is one of the few phones which the UK network EE says is compatible with its wifi calling, even if not bought directly from them (ie not on an EE firmware).
http://ee.co.uk/help/phones-and-device/wifi-calling
However, are the dual sim versions of the s7 edge compatible, too? AFAIK the dual sim versions are meant mainly for some Asian and Middle Eastern countries. EE does not know the answer.
On ebay I can find the G9350 and the G935FD versions.
The only information I managed to find on the web is a few discussions about the dual sim versions being incompatible with wifi calling with T-Mobile in the US.
I have the UK unlocked btu and That works on ee Wi-Fi calling
Sent from my SM-G935F using XDA-Developers Legacy app
@chrisully, thanks. S7 or s7 edge? Single or dual sim? If you have a UK version, I assume it's single sim? Where did you buy it?
Also, may I ask what BTU means, exactly, and how to interpret all the codes of a firmware? I thought BTU meant unbranded, but there are Asian unbranded firmwares without BTU in the name, so I'm not sure.
cdl2 said:
@chrisully, thanks. S7 or s7 edge? Single or dual sim? If you have a UK version, I assume it's single sim? Where did you buy it?
Also, may I ask what BTU means, exactly, and how to interpret all the codes of a firmware? I thought BTU meant unbranded, but there are Asian unbranded firmwares without BTU in the name, so I'm not sure.
Click to expand...
Click to collapse
Hi it's s7 edge but the s7 is the same. EE have community forums that can help. The btu is the firmware just look into guides into flashing with Odin. Btu is the UK generic version. I got my phone direct from Samsung but others have bought from carphone warehouse. The flashing is easy and lots of guides. Samobile is best to get firmware from. Also because it's official it won't good warranty or trip knox
Sent from my SM-G935F using XDA-Developers Legacy app
cdl2 said:
@chrisully, thanks. S7 or s7 edge? Single or dual sim? If you have a UK version, I assume it's single sim? Where did you buy it?
Also, may I ask what BTU means, exactly, and how to interpret all the codes of a firmware? I thought BTU meant unbranded, but there are Asian unbranded firmwares without BTU in the name, so I'm not sure.
Click to expand...
Click to collapse
BTU means unbranded, unlocked, i.e. direct from Samsung.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G935F using XDA-Developers Legacy app
Thanks both.
SM-G935FD is the dual sim S7 edge sold in Singapore and other Asian countries (not Hong Kong).
If I search sammobile.com, I see there are:
a Singapore Starhub version (Starhub is a local carrier): https://www.sammobile.com/firmwares/download/126542/G935FXXU1DQB7_G935FOLB1DQB7_STH/
a Singapore version I understand is unbranded, but does not have BTU in the name: https://www.sammobile.com/firmwares/download/126541/G935FXXU1DQB7_G935FOLB1DQB7_MM1/
Does BTU mean unbranded but sold in Europe? Is there any unbranded Asian firmware which is, in fact, compatible with EE's wifi calling?
This guy said that he managed to flash the sm-g935f firmware onto an sm-g935fd , ie a single sim firmare onto a dual sim phone.
http://www.coolsmartphone.com/2016/...locked-galaxy-s7-handsets/#comment-3029183255
He claims he retained dual sim functionality, but failed to get wifi calling to work with Vodafone. However, Vodafone states on its website that only Vodafone-branded phones work with its wifi calling, whereas unbranded phones should work with EE's wifi calling. I'm very surprised you can flash the firmware of a single sim onto a dual sim, but I'm wondering if this trick would work with EE.
cdl2 said:
This guy said that he managed to flash the sm-g935f firmware onto an sm-g935fd , ie a single sim firmare onto a dual sim phone.
http://www.coolsmartphone.com/2016/...locked-galaxy-s7-handsets/#comment-3029183255
He claims he retained dual sim functionality, but failed to get wifi calling to work with Vodafone. However, Vodafone states on its website that only Vodafone-branded phones work with its wifi calling, whereas unbranded phones should work with EE's wifi calling. I'm very surprised you can flash the firmware of a single sim onto a dual sim, but I'm wondering if this trick would work with EE.
Click to expand...
Click to collapse
I agree you need to flash BTU for WiFi support on EE network
I also recommend clearing cache partition in recovery after flashing BTU firmware (my S7E did not show the wifi calling option until i cleared cache and rebooted)
So, here's my experience. I bought a 128 GB dual sim s7 edge SM-G935FD from ebay. I think it ran a UAE firmware. There was no wifi calling. I didn't try to update the firmware.
I went to the sammobile website: https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/ , searched the firmwares for the SM-G935F (which is the single sim phone), and downloaded the UK BTU version (5-Apr-2017).
I followed the instructions here: https://forum.xda-developers.com/s7-edge/how-to/official-stock-firmware-update-odin-t3335065 to flash the firmware with Odin. Specifically, I put BL, AP and CP in the corresponding slots, and put CSC (not home_csc in the CSC slot). Still no option for wifi calling. I did an over-the-air update of the firmware, and, ta da, wifi calling magically appeared! To be clear, I did retain dual sim functionality. I note that sammobile has since uploaded a 7-May-2017 firmware; not sure if, flahsing that one directly, wifi calling would have appeared straight away.
I tested it with the EE carrier in the UK, and, yes, wifi calling does work!
Of course I can accept no responsibility if you follow the same steps but end up bricking your phone!
Related
hi,
is VoLTE with the G935FD yet possible?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It is a feature but it depends on your carrier/network provider if they support volte..
Sent from my SM-G935F using Tapatalk
Yes. I have G935FD and using VOLTE ( Hd calling ) in india. Network - Reliance JIO
Sent from my SM-G935F using Tapatalk
Yes. I have G935FD and using VOLTE ( Hd calling ) in india. Network - Reliance JIO
Click to expand...
Click to collapse
Thank you for the info! Could you please make a screenshot?
That would appear in your notification area if it is supported by your provider..
the-edge
Wow.
Are you using one SIM and a MicroSD-Card with your S7 Dual SIM (G935FD)?
Is it possible for you during a VoLTE-Call to surf in the internet or to send WhatsApp-Messages - at the same time?
Do you have in "Mobile Network Settings" also the possibilitiy to chose "VoLTE-Call" - like in my picture above?
I supposed you can do both the at same time provided you are you using a handsfree or speaker. Yes i have the option in mobile network setting.
the-edge
I supposed you can do both the at same time...
Click to expand...
Click to collapse
Could you please try to surf in the internet during a VoLTE-Call? Would be nice!
Done that many times..
the-edge-dou
zabaknilesh said:
Yes. I have G935FD and using VOLTE ( Hd calling ) in india. Network - Reliance JIO
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Hi
need your guidance.
i have just got my Relicance jio Sim and put it in my S7 Edge Duos (G935FD) bought from UAE .
i am unable to use VoLTE. , there is no option for wifi calling .
could you share what CSC u have in your phone?
what can i do to get VoLTE working on my device.
Please help. i need wifi calling /hd calling
oh i forgot to mention only data is working on my device it shows 4G.
voice calls are not working directly.. only way to make voice calls from Jio sim is to install jiojoin app. i have confirmed with jio help desk there is no issue with voice and data services from their end.
so it seems to be a firmware problem.
someone, please share your firmware details and CSC details etc so i can flash the same firmware and fix the issue..
Just put Mobile in LTE MODE in cellular networks. Automatically volte signal and HD calling would be detected.
Sent from my SM-G935F using Tapatalk
S7 Edge G935F Volte problem
I have ALSO BOUGHT Samsumg S7 edge G935F(Single Sim Version) From UAE
Using Reliance Jio
No option For VoLte
Mobile on Lte mode
Still No Volte
Can Not place calls also through dialier it goes throught jiojoin app
Have to continously keep data on
do not know what is the problem
ram161287 said:
I have ALSO BOUGHT Samsumg S7 edge G935F(Single Sim Version) From UAE
Using Reliance Jio
No option For VoLte
Mobile on Lte mode
Still No Volte
Can Not place calls also through dialier it goes throught jiojoin app
Have to continously keep data on
do not know what is the problem
Click to expand...
Click to collapse
http://forum.xda-developers.com/s7-edge/development/utility-flashable-csc-selection-30-t3392957
Flash it and select INS... after that you will get your Volte.
shailraj said:
hi
need your guidance.
I have just got my relicance jio sim and put it in my s7 edge duos (g935fd) bought from uae .
I am unable to use volet. , there is no option for wifi calling .
Could you share what csc u have in your phone?
What can i do to get volet working on my device.
Please help.
Click to expand...
Click to collapse
yourskd said:
http://forum.xda-developers.com/s7-edge/development/utility-flashable-csc-selection-30-t3392957
flash it and select ins... After that you will get your volte.
Click to expand...
Click to collapse
but the ins csc is for the fd variant can i flash it on f variant
ram161287 said:
but the ins csc is for the fd variant can i flash it on f variant
Click to expand...
Click to collapse
Yup go for it.
yourSKD said:
http://forum.xda-developers.com/s7-edge/development/utility-flashable-csc-selection-30-t3392957
Flash it and select INS... after that you will get your Volte.
Click to expand...
Click to collapse
so to flash this i will have to root right?
whats is best method for rooting? could you help me with steps? CF-Auto Root??
what stuff shud i backup before flashing? and how
will rooting / flashing new csc delete data on my phone?
Hello shailraj,
I have the exact same problem that is with you.
i also have brought the phone from UAE.
Please help me too, just tell me that this CSC flashing helped you. You got VoLTE after flashing this ???
Thanking You.
rahulkmadnani said:
Hello shailraj,
I have the exact same problem that is with you.
i also have brought the phone from UAE.
Please help me too, just tell me that this CSC flashing helped you. You got VoLTE after flashing this ???
Thanking You.
Click to expand...
Click to collapse
Hi
I rooted my phone and flashed king rom and csc from India. Everything working perfectly.
Sent from my SM-G935F using Tapatalk
yes jus flash csc version 1.5 and select indian csc and ur good to go. I did jus now on basic plus 2.1 rom . It should work on other roms and stock as well
i've got the same problem as evyone else here with G935F. And i dont want tot root my phone. has any1 found a way to make VoLTE work without rooting the phone?
Hi there,
The phone worked fine a month but after an firmware update. I am getting "no service" permenantly.
Tried almost everything.
- mobile networks in setting finds no networks.
- tried a different sims (including a european prepaid sim from ireland)
- factory reset
- tried downgrade to the older rom (EGY oldest firmware) nothing works and even the latest UK(BTU) firmware
I am located in the US (cricket wireless). I believe the phone was the EGY origin.
Anyone else having or seen a solution to this issue would be greatly appriecated.
I think it's something with the region lock. This is very frustrating as first experience with an andriod phone.
Cheers.
chenmenis said:
Hi there,
The phone worked fine a month but after an firmware update. I am getting "no service" permenantly.
Tried almost everything.
- mobile networks in setting finds no networks.
- tried a different sims (including a european prepaid sim from ireland)
- factory reset
- tried downgrade to the older rom (EGY oldest firmware) nothing works and even the latest UK(BTU) firmware
I am located in the US (cricket wireless). I believe the phone was the EGY origin.
Anyone else having or seen a solution to this issue would be greatly appriecated.
I think it's something with the region lock. This is very frustrating as first experience with an andriod phone.
Cheers.
Click to expand...
Click to collapse
Did you check your imei# to make sure it's still there.... About device/status /imei info.... Is it correct?
Galaxy S7 edge
Ye first things first is to check if the IMEI is still showing
Sent from my SM-G935F using Tapatalk
Yes I did Imei is valid
chenmenis said:
Yes I did Imei is valid
Click to expand...
Click to collapse
Install this APP and add screenshots of all settings.
Joku1981 said:
Install this APP and add screenshots of all settings.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G935F using XDA-Developers mobile app
I flashed with UK BTU firmware with odin it was orginally an EGY origin I believe.
chenmenis said:
View attachment 3736577View attachment 3736578View attachment 3736579View attachment 3736580View attachment 3736581
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Hmm. Don't know what it isn't working. Should work based on what's there. Try turning on and off the device with the sim card removed
Sent from my SM-G935F using Tapatalk
osmosizzz said:
Hmm. Don't know what it isn't working. Should work based on what's there. Try turning on and off the device with the sim card removed
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
yeah tried that. no luck.
It seem you flash the branded firmware and it might lock the network to their carrier. Try flash unbrand firmware like BTU (unbranded UK), DBT(Germany) etc.
Sent from my SM-G935F using Tapatalk
NonXtreme said:
It seem you flash the branded firmware and it might lock the network to their carrier. Try flash unbrand firmware like BTU (unbranded UK), DBT(Germany) etc.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
I am already using the BTU UK firmware. How do you tell branded?
chenmenis said:
yeah tried that. no luck.
Click to expand...
Click to collapse
"The tab below this sticker explains how and why, albeit in tiny and rather verbose script. Essentially, in order for your unlocked European GS7/Edge to be fully unlocked, you first need to make a total of five minutes worth of phone calls using a European SIM. If you don't do this, and try to use it with a SIM from outside of Europe, it won't connect to the network." Seems that the update restored that script. Source: HERE.
Joku1981 said:
"The tab below this sticker explains how and why, albeit in tiny and rather verbose script. Essentially, in order for your unlocked European GS7/Edge to be fully unlocked, you first need to make a total of five minutes worth of phone calls using a European SIM. If you don't do this, and try to use it with a SIM from outside of Europe, it won't connect to the network." Seems that the update to reset that script. Source: HERE.
Click to expand...
Click to collapse
So I physically need to be in europe do that ? Because I tried with a vodafone sim from ireland from the US but that didn't work.
He said it was working fine before update so surely it shouldnt be because of the sim as an update wouldnt change the EGY product code, i take it that you changed the firmware after it started saying "no service"?
Sent from my SM-G935F using XDA-Developers mobile app
jadaress1 said:
He said it was working fine before update so surely it shouldnt be because of the sim as an update wouldnt change the EGY product code, i take it that you changed the firmware after it started saying "no service"?
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
yes.
First thing id try is going back to the original firmware the phone came with. If it gets signal again you know that the uk firm isnt compatible with where you are. If you were rooted id have suggested finding thr modem firm and flashing it. But dont do that cause if the phone is faulty you will need your warranty in tack to return the phone for repair.
Edit. Another thought is my wife was having problems with her sim. She rang vodafone (her carrier) and they did a sim refresh on her sim remotely which gave her signal again. Maybe try ringing your carrier to see if thats a issue or not.
tapped on #datbombv7EchoeRom
MRDOCA said:
First thing id try is going back to the original firmware the phone came with. If it gets signal again you know that the uk firm isnt compatible with where you are. If you were rooted id have suggested finding thr modem firm and flashing it. But dont do that cause if the phone is faulty you will need your warranty in tack to return the phone for repair.
Edit. Another thought is my wife was having problems with her sim. She rang vodafone (her carrier) and they did a sim refresh on her sim remotely which gave her signal again. Maybe try ringing your carrier to see if thats a issue or not.
tapped on #datbombv7EchoeRom
Click to expand...
Click to collapse
yeah. no luck. I used stock firmware and I tried with multiple sims (different carriers and countries).
Could be faulty. Time to take it back
tapped on #datbombv7EchoeRom
Would a repair shop able to do anything with it?
Hi. I flash my s7 edge duos with UK btu firmware. All working perfect. I am in EE network. Is there any way to enable VoLTE on that firmware? Or maybe only one way to do it is flash EE branded firmware?
troxter said:
Hi. I flash my s7 edge duos with UK btu firmware. All working perfect. I am in EE network. Is there any way to enable VoLTE on that firmware? Or maybe only one way to do it is flash EE branded firmware?
Click to expand...
Click to collapse
Three uses volte and BTU works fine. I'm having no issues with volte.
The BTU firmware does not have VOLTE you would need to have the EE CSC (EVR ) on your device to gain this.
daveparki said:
The BTU firmware does not have VOLTE you would need to have the EE CSC (EVR ) on your device to gain this.
Click to expand...
Click to collapse
I'm on BTU with three UK and volte works fine for me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
daveparki said:
The BTU firmware does not have VOLTE you would need to have the EE CSC (EVR ) on your device to gain this.
Click to expand...
Click to collapse
Is it possible to flash EE CSC only or I need to flash whole EE rom?
Yes it works ok as I've done it on my dual sim variant
ASHLEY117 said:
I'm on BTU with three UK and volte works fine for me.
View attachment 4137296
Click to expand...
Click to collapse
EE and Three are different. As stated before, EE requires EE CSC to be flashed to the ROM for VoLTE to work.
---------- Post added at 01:13 PM ---------- Previous post was at 01:12 PM ----------
troxter said:
Is it possible to flash EE CSC only or I need to flash whole EE rom?
Click to expand...
Click to collapse
CSC is enough. Back up your data. Phone will be wiped.
Galactus said:
EE and Three are different. As stated before, EE requires EE CSC to be flashed to the ROM for VoLTE to work.
---------- Post added at 01:13 PM ---------- Previous post was at 01:12 PM ----------
CSC is enough. Back up your data. Phone will be wiped.
Click to expand...
Click to collapse
Should I flash
CSC_EVR_G935FEVR1DQC1_CL10422490_QB12843457_REV00_user_low_ship.tar
Click to expand...
Click to collapse
or
HOME_CSC_EVR_G935FEVR1DQC1_CL10422490_QB12843457_REV00_user_low_ship.tar
Click to expand...
Click to collapse
?
troxter said:
Should I flash
or
?
Click to expand...
Click to collapse
Let me explain.
HOME_CSC is if you "DO NOT" want to wipe data (such as flashing a rom without wiping data). This method will keep data but will not change CSC.
You want to use the one that does not have HOME_CSC in it. So pick the first one.
Also, make sure you are flashing all 4 files in ODIN.
BTU BL
BTU AP
BTU CP
EE CSC
ASHLEY117 said:
I'm on BTU with three UK and volte works fine for me.
View attachment 4137296
Click to expand...
Click to collapse
Just seen this thread, did you get your phone from 3 or did you buy unbranded? im asking because im on 3 network but bought my phone separately and no way can i get it to use volte. Only way ive been told is to flash 3 firmware
TIA
Corduroysack said:
Just seen this thread, did you get your phone from 3 or did you buy unbranded? im asking because im on 3 network but bought my phone separately and no way can i get it to use volte. Only way ive been told is to flash 3 firmware
TIA
Click to expand...
Click to collapse
It's spotty and works when it wants to on BTU so I ended up flashing 3 csc. I bought it SIM free.
ASHLEY117 said:
It's spotty and works when it wants to on BTU so I ended up flashing 3 csc. I bought it SIM free.
Click to expand...
Click to collapse
Just in the process off dlding latest 3 firms, so you just flashed the csc nothing more?
Corduroysack said:
Just in the process off dlding latest 3 firms, so you just flashed the csc nothing more?
Click to expand...
Click to collapse
Yeah I flashed csc using csc selection zip on this forum and it works now. Three UK had no idea what I was asking ???
ASHLEY117 said:
Yeah I flashed csc using csc selection zip on this forum and it works now. Three UK had no idea what I was asking
Click to expand...
Click to collapse
lol i got the same response when i asked lol cheers mate i'll be doing that when i have time
sorry guys, quick question. im totally stupid with this firmware buisness, watched like 50 youtube videos and search alot of stuff but i dont get it.
basically i bought my s7 in the UAE (SM-G930FD) dual sim and want to change the firmware to UK SM-G930F cos i cant use samsung pay with my british card/account.
looking ito the firmware downloads on sammobile, theres loads of different versions like ee or 3g etc. my phone is unlocked and i want it to stay that way so which do i choose? do i have to choose the firmware of the network i want to use?
thanks
I have just acquired the international factory unlocked Galaxy S8, model number SM-G950FD duel sim, and don't see that specific variant on Sammobile official rom downloads. There are many SM-G950F downloads and correct me if I'm wrong, but I assume they would work, only problem is don't know which region I should use. There are 7 or 8 different regions with the matching PDA and CSC sequences as mine, but does it matter which one I choose? Just want to be sure I have the proper "official" backup rom before I venture into rooting etc.
Have searched this thread and the net to no avail.
Any advice and clarification on this would be greatly appreciated!
G950FD is a variant of G950F. But still I'm not sure if you can flash it or not because modem, bootloader and baseband are exact model number exclusive. Btw Sammobile is not official provider of stock rom. You can try using Samsung's official app.
OK thanks! Now when you say "try using Samsung's official app", do you mean Smartswitch for Windows or Kies 3 or something other?
eltoro5 said:
OK thanks! Now when you say "try using Samsung's official app", do you mean Smartswitch for Windows or Kies 3 or something other?
Click to expand...
Click to collapse
Yes I was talking about SmartSwitch.
Fd and f are the same just flash away
undercontr said:
Yes I was talking about SmartSwitch.
Click to expand...
Click to collapse
So sure enough I locked myself out of my phone after rooting (don't ask) only access was download mode, so I tried SmartSwitch and it got me back up and running! So thank you very much for the tip "undercontr"!
Only thing I would suggest is to ensure you have your phone's serial number (required for SmartSwitch) on hand. Because other than acquiring from the dialer code, the only other place is on the sticker on back of phone....it's not on the box. So keep your sticker in a safe place when you remove from back of phone!
eltoro5 said:
So sure enough I locked myself out of my phone after rooting (don't ask) only access was download mode, so I tried SmartSwitch and it got me back up and running! So thank you very much for the tip "undercontr"!
Only thing I would suggest is to ensure you have your phone's serial number (required for SmartSwitch) on hand. Because other than acquiring from the dialer code, the only other place is on the sticker on back of phone....it's not on the box. So keep your sticker in a safe place when you remove from back of phone!
Click to expand...
Click to collapse
If you're not hanging around forbidden stuff in Android, you should always stick to official stuff. Stability is greater in that way.
I wouldn't root my device if it has still warranty.
Rom [[ sm-g950f ]] (( turkey )) from sammobile
work on sm-g950fd >>>
mlikal3oood said:
Rom [[ sm-g950f ]] (( turkey )) from sammobile
work on sm-g950fd >>>
Click to expand...
Click to collapse
I have SM-G950FD (Duos model) . Can i use SM-950F (Turkey) firmware for DUOS Model ? Tested ? After flash firmware any signal problem ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
F Firmware works for FD as well. There's no difference.
Pull the firmware for SM-G950F from Samfirm tool, according to your region.
JazonX said:
F Firmware works for FD as well. There's no difference.
Pull the firmware for SM-G950F from Samfirm tool, according to your region.
Click to expand...
Click to collapse
Did you try on S8 Duos ?
Worked Perfectly Single Sim - Dual Sim firmware same. SM-G950F
ok, the F firmware works well on FD device, but can I put 2 sim cards on F firmware or it will work with one sim card only?
DJC_SP said:
ok, the F firmware works well on FD device, but can I put 2 sim cards on F firmware or it will work with one sim card only?
Click to expand...
Click to collapse
2 Simcard working perfectly same time.
I have G950F phone, and I'm trying to get Samsung Pay US to work. Can I flash G950FD (XSG) firmware on my G950F phone?
When I had my S7 edge (G935F), I had XSG firmware and I was able to get Samsung Pay US to work but XSG model was G935F then and not G935FD.
alidarkstone said:
Did you try on S8 Duos ?
Click to expand...
Click to collapse
Yes, Mine is XSG. So using the MID firmware from SAMFIRM.
eltoro5 said:
I have just acquired the international factory unlocked Galaxy S8, model number SM-G950FD duel sim, and don't see that specific variant on Sammobile official rom downloads. There are many SM-G950F downloads and correct me if I'm wrong, but I assume they would work, only problem is don't know which region I should use. There are 7 or 8 different regions with the matching PDA and CSC sequences as mine, but does it matter which one I choose? Just want to be sure I have the proper "official" backup rom before I venture into rooting etc.
Have searched this thread and the net to no avail.
Any advice and clarification on this would be greatly appreciated!
Click to expand...
Click to collapse
(sorry I am noob, cannot post formatted hyperlink): updato.com/firmware-archive-select-model is good for downloading firmware.
And thanks to everyone here! - I was coming to ask same question: Would I brick my SM-G955FD by flashing SM-G955F software.. (to enable native WiFi Callling/VoWiFi by fllashing to a region which does not have SM-G955FD specific firmware).
Can you get like a another sim tray and use sd card? I'm presuming its the same as F and no real changes tbh
MrPhilo said:
Can you get like a another sim tray and use sd card? I'm presuming its the same as F and no real changes tbh
Click to expand...
Click to collapse
I just checked my Duo; The SIM Tray has a 'SIM1' slot, and a 'SIM2/MicroSD' slot which looks like it can take either (not both).
work bouth card
This firmware has version number PDA G9860ZHS1ATF6 and CSC G9860OZS1ATF6. The operating system of this firmware is Android 10 , with build date Sun, 07 Jun 2020 23:39:40 +0000. Security patch date is 2020-06-01, with changelist 18598673.
G9860ZHU2ATFD is out since yesterday for BRI S20+ 5G; 5G now enable
The exact changes may differ depending on your device model, country/Region, and service provider.
• 5G has been enabled.
※ Requires optimal 5G connection. 5G services are only supported in Taiwan network. Actual 5G network coverage and speed may vary on region and network service provider, since 5G international roaming service of the designated countries and areas will be supported and announced after they pass the network service provider’s verification test.
• Other bug fixes
- The stability of Camera has been improved.
- Fixes the issue that sometimes device reset when setting 4K image as wallpaper.
• The latest Android security patch has been applied.
- Device security has been further enhanced.
• MirrorLink funtion will be deleted.
Another update out for TGY and BRI
west2cool said:
Another update out for TGY and BRI
Click to expand...
Click to collapse
Thanks for all of us
Pascal536 said:
Thanks for all of us
Click to expand...
Click to collapse
The latest ATFF firmware can be donwloaded for the SM-G9860 for BRI (Taiwan), CHC (China) or TGY (Taiwan) CSC.
The first one (BRI) is 5265 MB (Frija)
The second one (CHC) is 6376 MB (Frija)
The third (TGY) is 5167 MB (Frija)
How can we explain these 3 differents sizes for the same firmware for the same 9860 Samsung Phone ?
Pascal
BRI and TGY are in the same multi CSC OZS 5167 MB
BRI and TGY are in the same multi CSC OZW for purple édition BTS 5265 MB
CHC is in single CSC OZL 6376 MB
prism and optics ( CSC ) have not the same size
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yakapa40 said:
BRI and TGY are in the same multi CSC OZS 5167 MB
BRI and TGY are in the same multi CSC OZW for purple édition BTS 5265 MB
CHC is in single CSC OZL 6376 MB
prism and optics ( CSC ) have not the same size
Click to expand...
Click to collapse
I have the TGY bought it from Hong Kong and the update was 385.79 MB
guys... is it possible to flash a OXM firmware into a phone that originally came with OWO fw? I want to change CSC from ZTO (Brazil) to any european country that has native call recording
If answer is yes, which european CSC would be recommend ? Having the fastest update roll out and native recording? Is it possible not to break OTA on the process?
I do have a question... i currently have a S20+ G986N --> korean version... is it possible to install the U version? If yes, do I have the benefit to activate the 4G and 5G frequencies? --> for example 5G is limited... only the N78 (3500mhz)
Or it the G986N hareware limited? And can I activate the dual sim? Currently is "onyl" single sim!
New update
Just want to make sure guys but, what I've read in different forums, there's no way possible without rooting to change the CSC from BRI to US CSC (U1 for example)?
BTH7 is out for BRI 9860; it is 987,96 Mo; it is August pacth
New update! It's One Ui 2.5
Hello,
I got S20+ Taiwan BRI firmware, it is possible to flash the China CHC firmware? I want to use the call recording.
raul-_-flores said:
Just want to make sure guys but, what I've read in different forums, there's no way possible without rooting to change the CSC from BRI to US CSC (U1 for example)?
Click to expand...
Click to collapse
You can with SamKey but you need to check if the firmware supports that csc