Hello
As menitoned, my phone won't boot into TWRP, it does boot into Android 7.0 EMUI 5.0, can boot into revolutionary recovery, but no, not TWRP... Bootloader is unlocked! Please help
Are you certain it's not booting into TWRP? The reason I ask is I thought I couldn't boot into the custom recovery programme either: it kept loading EMUI, using the phone's buttons. In my case, ver.4.1.1
Have you tried booting via ADB commands? I had reloaded a stock update, then unlocked the bootloader for a second time, only find the same scenario. It wasn't until I tried rebooting with ADB that it actually loaded TWRP.
In case you aren't familiar with the commands. Install ADB Tools, then open a command window from the correct folder location, where ADB tools are installed. To check the PC recognises the device, use:
adb Devices
it should show the device's serial number {I think}. Then:
adb reboot recovery
it should reboot into recovery mode. If TWRP has been installed correctly, it should load into it. Otherwise...I don't have a clue what the issue is. All the best.
Related
OK so phone was rooted with twrp installed. decided to update to latest ota 30b only I wiped and just flashed boot file and supersu without the actual rom. I know. now the phone goes straight into fastboot mode... I would think twrp is still installed but dont seem to be able to boot into it. I had adb and fastboot on my pc from before but havent used this in some time. if I try to open either of these the command window pops up and quickly closes.. What can I do ?.
new info: fadtboot is working in fact i have wrote a twrp recovery but still cant boot out of fastboot... adb device not listed. i reinstalled minimal adb and fastboot. help
I have some important files that I forgot to backup and was suddenly hit by the BLOD.
Is it possible to retrieve files from my device that is stuck on bootloop?
Details:
Device is rooted
I have the ability to run fastboot commands
TWRP not installed
Android version: 7.1.1
I tried to install TWRP using fastboot command and boot into recovery but all it did was restarted the device and continued with the bootloop.
I am able to run fastboot commands and see my device using "fastboot devices".
However when I try running "adb" commands, I get the error "no device/emulators found". Is this normal?
TIA
As long as I know, you can't use ADB commands in bootloader.
To use ADB, you should enter Android os, or at least recovery.
So it's normal that adb doesn't recognize your device in bootloader.
Hey guys, I'm at a lost here. I don't think I'm that stupid but I am following all steps from the guides to install TWRP without luck. I already managed to unlock my bootloader with Axon7Toolkit. I already certified that QUSB_Bulk driver is installed, I did it with Zadig, but when in EDL mode, even after killing adb, the axon7tool can't find it. I tried installing a zip with the toolkit but when I choose the package, the toolkit simply closes. Is that me? My phone?
Thank you!
gibawatts said:
Hey guys, I'm at a lost here. I don't think I'm that stupid but I am following all steps from the guides to install TWRP without luck. I already managed to unlock my bootloader with Axon7Toolkit. I already certified that QUSB_Bulk driver is installed, I did it with Zadig, but when in EDL mode, even after killing adb, the axon7tool can't find it. I tried installing a zip with the toolkit but when I choose the package, the toolkit simply closes. Is that me? My phone?
Thank you!
Click to expand...
Click to collapse
What software version are you on?
I was at latest nougat but I downgraded to B10
Doing it via fastboot never fails for me.
Get to fastboot put two img in adb folder (I rename it for ease of typing since I suck) rename to recovery.img
Type this cmd in adb
Fastboot flash recovery recovery.img
Reboot to recovery and root. Done deal
download 3.1.0.0 twrp into your download folder on your desktop enter fastboot into your phone open up your command prmt type fastboot devices, your phone should appear then type fastboot flash recovery then go to the twrp right click drag it into the command prmt air page and place it there. you should see the file then hit enter. It'll take like 5 seconds it's really fast then reboot t recovery. when in twrp it'll ask you to install it again say no and uncheck the to options. DONE.
After loads of stress and bangs on the table I managed to unlock, install TWRP, LOS and root. I removed every driver related to my cell phone, deleted everything I download from it and started from scratch. I installed TWRP via fastboot but wasn't able to enter recovery mode, than I mase the stupidity to lock the bootloader back and got stuck in that password screen. Then I gave another go with the toolkit, unlocked it again and, I don't know how or why, it finally booted TWRP. Now everything is OK. Glad to be back to "Nexus mode" after so many time.
Thank you!
I have unlocked my phone, hoping to find a fix to USB external camera not being recognized. As a consequence, I am not able to update my system through OTA. Moreover, I am no longer able to enter fastboot mode. Whatever key combination I tried, my phone will do a normal boot. When I power up or I press volume - I only end up doing a normal boot or powering off. If I press all 3 keys together I get into the e-recovery boot, which fails. I have only been able to boot into TWRP after downloading a system update and choosing to install it. With this procedure, the update will not be installed, but I will boot into TWRP. From here, if I choose recovery, I do boot into fastboot, but my fastboot is not recognized by my computer, as it was before. Running either ADB or Fastboot will not reveal any device connected.
pieemme said:
I have unlocked my phone, hoping to find a fix to USB external camera not being recognized. As a consequence, I am not able to update my system through OTA. Moreover, I am no longer able to enter fastboot mode. Whatever key combination I tried, my phone will do a normal boot. When I power up or I press volume - I only end up doing a normal boot or powering off. If I press all 3 keys together I get into the e-recovery boot, which fails. I have only been able to boot into TWRP after downloading a system update and choosing to install it. With this procedure, the update will not be installed, but I will boot into TWRP. From here, if I choose recovery, I do boot into fastboot, but my fastboot is not recognized by my computer, as it was before. Running either ADB or Fastboot will not reveal any device connected.
Click to expand...
Click to collapse
When you use key combinations, you must shutdown your phone first, not reboot or you can boot into system, make sure that usb debugging is turned on, open adb and type "adb reboot bootloader".
DeathBell said:
When you use key combinations, you must shutdown your phone first, not reboot or you can boot into system, make sure that usb debugging is turned on, open adb and type "adb reboot bootloader".
Click to expand...
Click to collapse
Thanks, I followed your instructions but with no success. As soon as I plug into USB it will power on and go on with a normal system boot, no matter how quick I am in typing the command "adb reboot bootloader", which invariably returns "no devices/emulators found", or whether I press the volume - button or not. This also happens when I am in the charging screen (not sure whether this also equals power off).
pieemme said:
Thanks, I followed your instructions but with no success. As soon as I plug into USB it will power on and go on with a normal system boot, no matter how quick I am in typing the command "adb reboot bootloader", which invariably returns "no devices/emulators found", or whether I press the volume - button or not. This also happens when I am in the charging screen (not sure whether this also equals power off).
Click to expand...
Click to collapse
No, you need to boot to Android to use adb.
Is your device bricked or stuck in a bootloop or something?
DeathBell said:
No, you need to boot to Android to use adb.
Is your device bricked or stuck in a bootloop or something?
Click to expand...
Click to collapse
I wouldn’t call it properly bricked, inasmuch as it is actually doing its job. However, It does some strange things: it gets the OTA updates, but when I click on Download and Install, it restarts in the TWRP menu (which I cannot otherwise access. I have 2 TWRP apps installed, which don’t seem to be of any use: official TWRP App and TWRP Manager). When I am in the TWRP menu, I can choose to restart in the bootloader. However, once there, with the green window telling me that my phone is flashed, the phone is still not detected by ADB or Fastboot commands. I don’t know when the bootloader started to be unaccessible because I left the tinkering a couple of months ago, when I realized that nobody so far has had any success in getting a P10 Lite to work with a USB Endoscope.
pieemme said:
I wouldn’t call it properly bricked, inasmuch as it is actually doing its job. However, It does some strange things: it gets the OTA updates, but when I click on Download and Install, it restarts in the TWRP menu (which I cannot otherwise access. I have 2 TWRP apps installed, which don’t seem to be of any use: official TWRP App and TWRP Manager). When I am in the TWRP menu, I can choose to restart in the bootloader. However, once there, with the green window telling me that my phone is flashed, the phone is still not detected by ADB or Fastboot commands. I don’t know when the bootloader started to be unaccessible because I left the tinkering a couple of months ago, when I realized that nobody so far has had any success in getting a P10 Lite to work with a USB Endoscope.
Click to expand...
Click to collapse
Thats normal behaviour, when you have a custom recovery installed and do anything in the stock recovery then it boots you into the custom recovery, it should also boot to TWRP when you do factory reset in the stock recovery. And when your phone isn't detected by fastboot then its probably a adb and fastboot installation issue on your PC, type "fastboot devices" to see if it detects your device. And what do you even want to do in fastboot?
Also are you in Nougat or Oreo?
DeathBell said:
Thats normal behaviour, when you have a custom recovery installed and do anything in the stock recovery then it boots you into the custom recovery, it should also boot to TWRP when you do factory reset in the stock recovery. And when your phone isn't detected by fastboot then its probably a adb and fastboot installation issue on your PC, type "fastboot devices" to see if it detects your device. And what do you even want to do in fastboot?
Also are you in Nougat or Oreo?
Click to expand...
Click to collapse
I am not too sure to have any working recovery at all, right now. If I press all 3 buttons, I get into the Huawei recovery mode, which fails. I am on EMUI 5.1.1 (Nougat) and would like to install a stock recovery to Oreo. If I am able to get to a working bootloader mode, I would like to install this file which seems to be a stock recovery with Oreo (WARSAW L21C432B182_EU_SERVICE_ANDROIDHOST.RU.RAR). Otherwise, I will buy a MicroSD card reader and try copying this installation to the card, which, according to this video (https://www.youtube.com/watch?v=0vDgDXePAR4&feature=youtu.be) should be the last resort, if everything else fails. I would be perfectly happy to return to a working and updated standard EMUI. I'm told that if I installed the OTA version this would not be working correctly on my my phone. According to an app called Rootchecker, my phone is not properly rooted either, but there are a lot of crappy apps out there, so I don't know what to believe.
BTW: I don't believe there is any problem with my adb fastboot installation (on MacOS). It was working earlier on. When I type "fastboot devices", it returns: "waiting for any device"
pieemme said:
I am not too sure to have any working recovery at all, right now. If I press all 3 buttons, I get into the Huawei recovery mode, which fails. I am on EMUI 5.1.1 (Nougat) and would like to install a stock recovery to Oreo. If I am able to get to a working bootloader mode, I would like to install this file which seems to be a stock recovery with Oreo (WARSAW L21C432B182_EU_SERVICE_ANDROIDHOST.RU.RAR). Otherwise, I will buy a MicroSD card reader and try copying this installation to the card, which, according to this video (https://www.youtube.com/watch?v=0vDgDXePAR4&feature=youtu.be) should be the last resort, if everything else fails. I would be perfectly happy to return to a working and updated standard EMUI. I'm told that if I installed the OTA version this would not be working correctly on my my phone. According to an app called Rootchecker, my phone is not properly rooted either, but there are a lot of crappy apps out there, so I don't know what to believe.
BTW: I don't believe there is any problem with my adb fastboot installation (on MacOS). It was working earlier on. When I type "fastboot devices", it returns: "waiting for any device"
Click to expand...
Click to collapse
I still can't uderstand you. Can you boot into Android or not? And Does TWRP work? When you device is softbricked, what did you do to brick it?
At one point you say that you can access fastboot by choosing reboot to bootloader in TWRP and then you say that you have no working recovery at all.
Anyway I can't help you with the fastboot thing then and that file isn't Oreo it's an old version of Nougat, B360 and up is Oreo and also B321 witch is Oreo Beta. You can only flash image files in fastboot anyway as that file needs to be unpacked and put on the dload folder on your sd card.
When you want to get to Oreo you can either use service roms from this thread https://forum.xda-developers.com/p10-lite/development/service-rom-b362-c432-upgrade-o-o-n-o-t3813946, you need to copy the two zip files into the dload folder in your SD card. You can also use HWOTA but that wouldn't work since fastboot isn't working for whatever reason. Or when your custom recovery is working you can use HuRUpdater. But you need to be on the newest version of Nougat B210 or B209 to update as otherwise you may brick your phone.
Hi,
Today I wanted change my recovery. I had the Lineage OS recovery, but i was trying to install the twrp recovery.
So, the guide of twrp says that you should boot the twrp via fastboot boot twrp.img and install via the booted twrp. But I mistaken the command and I wrote fastboot flash boot twrp.img, I tried to reboot and the device booted himself in fastboot with the enter reason "error boot prepare" and I can't boot into the system or recovery.
I tried to flash the official image downloaded from the Google Developers website, but when i run ./flash-all.sh, console get stuck. I waited for about 15 minutes but nothing. I tried even the official Android Flash Tool but after 10 seconds it says "Your device stopped responding. You may have to select restart in the bootloader menu in order for it to be recognised again."
Does anyone know how to help me? Thanks in advance.
GioPan_ said:
Hi,
Today I wanted change my recovery. I had the Lineage OS recovery, but i was trying to install the twrp recovery.
So, the guide of twrp says that you should boot the twrp via fastboot boot twrp.img and install via the booted twrp. But I mistaken the command and I wrote fastboot flash boot twrp.img, I tried to reboot and the device booted himself in fastboot with the enter reason "error boot prepare" and I can't boot into the system or recovery.
I tried to flash the official image downloaded from the Google Developers website, but when i run ./flash-all.sh, console get stuck. I waited for about 15 minutes but nothing. I tried even the official Android Flash Tool but after 10 seconds it says "Your device stopped responding. You may have to select restart in the bootloader menu in order for it to be recognised again."
Does anyone know how to help me? Thanks in advance.
Click to expand...
Click to collapse
Do you have tryied to run the official google tool in Windows to try to rescue it?
Estebiu said:
Do you have tryied to run the official google tool in Windows to try to rescue it?
Click to expand...
Click to collapse
Yes, I wrote in the post, I tried both the command line tool and the chrome version. Btw i'm on linux
Okay so, I fixed.
For anyone who will have this problem you just need to flash official Android 9 and next Android 10. Only with Android 10 you can use fastboot flash boot recovery.img (you can't use twrp in android 10 with the Pixel 3a)
GioPan_ said:
Okay so, I fixed.
For anyone who will have this problem you just need to flash official Android 9 and next Android 10. Only with Android 10 you can use fastboot flash boot recovery.img (you can't use twrp in android 10 with the Pixel 3a)
Click to expand...
Click to collapse
I'll try this...
GioPan_ said:
Okay so, I fixed.
For anyone who will have this problem you just need to flash official Android 9 and next Android 10. Only with Android 10 you can use fastboot flash boot recovery.img (you can't use twrp in android 10 with the Pixel 3a)
Click to expand...
Click to collapse
Does this work if adb not working? I only have fastboot.
WriteLovey said:
Does this work if adb not working? I only have fastboot.
Click to expand...
Click to collapse
It depends if your pc were authorized, if it was, you can use fastboot to flash the stock version of Android 9, just running the flash-all(.bat) script.
GioPan_ said:
It depends if your pc were authorized, if it was, you can use fastboot to flash the stock version of Android 9, just running the flash-all(.bat) script.
Click to expand...
Click to collapse
I'm not certain I understand what you mean by PC authorized? I'm using a Windows 10 tablet. When the phone is attached to the computer it sees it as a device that can be disconnected through USB.
WriteLovey said:
I'm not certain I understand what you mean by PC authorized? I'm using a Windows 10 tablet. When the phone is attached to the computer it sees it as a device that can be disconnected through USB.
Click to expand...
Click to collapse
All is well. I'm back on my Pixel, yeah!
GioPan_ said:
It depends if your pc were authorized, if it was, you can use fastboot to flash the stock version of Android 9, just running the flash-all(.bat) script.
Click to expand...
Click to collapse
I just had an encounter with this. I was rooting my device (Pixel 3A) and messed up my partitions through accidentally attempting a downgrade which broke all my ****. I was unable to easily reset this device to factory, so it took me several days to figure out and root. I'm getting better though as a hacker, because a year ago this would have taken me a month.
I was able to enter recovery mode (lying down Android, NO COMMAND). From this recovery mode, adb devices -l recognized my device, although I was unable to get a shell.
At first, ADB was telling me the device was authorized, but I messed with a bunch of other stuff (tried to flash a bunch of different partitions and monkey around in general trying to install Magisk) and then ADB started telling me it wasn't authorized when I used devices -l.
Once it said unauthorized, I was unable to issue the device any commands with ADB, so I just used hardware keys to get into recovery mode. From there, I selected OTA update, and it got into sideload mode. At that point, I used adb sideload with the OTA package that I downloaded here https://developers.google.com/android/ota
^^^ That operation did successfully restore my device to factory
This following guide here describes the details of how to use hard keys to enter recovery on this phone (don't download anything from there tho, and make sure your adblock is on)
How to Hard Reset your new Google Pixel 3a [Tutorial]
In this article, you will learn how to start your Google Pixel 3a up into the Recovery Mode and perform the Hard Reset to make it work perfectly again.
thedroidguy.com
I just wanted to say, I've been wrestling this hardbrick for a couple of days with my Pixel 3a.
I've finally overcome it by sideloading the most recent OTA update after using a hard key combo to get into recovery mode. The hard key combo is hold Power Button, tap Volume Up, then release both. Then, all you need is to use the command:
adb sideload <OTA.zip>
^^^OTA wasn't the actual filename though, you can download OTA packages for Pixel 3A here: https://developers.google.com/android/ota
the OTA binaries are NOT the same as the factory images, which is here
Factory Images for Nexus and Pixel Devices | Google Play services | Google for Developers
developers.google.com
Sideloading the OTA package brought my phone back from only having fastboot and recovery mode, even when flash-all.sh from the official downloaded firmware failed. Now I know how to undo damage that I cause by rooting this thing. Since I sideloaded newest firmware, it was also like applying an update. I easily got root after that, and I've logged the process. I'll make it into a guide soon
I'll just note that if you accidentally flashed the TWRP boot image instead of simply booting into it, I believe all you have to do is flash the stock boot.img to fix the problem. Obviously you can sideload the entire rom image, but that shouldn't be necessary.
Using the Windows computer (or whatever computer you are sending ADB commands from), download the full stock image directly from Google. Unzip it and then upzip the folder inside. You should find the boot.img file inside that folder. Take that file and then flash it to the phone using the normal ADB command: fastboot flash boot boot.img
While I haven't tried this myself recently, it should work in theory. The command "fastboot flash boot twrp.img" flashes the boot partition with a non-working twrp image, so replacing the faulty image with the stock boot.img should fix the problem.
If I did the same I would first attempt to manually put device in bootloader/aka fastboot mode then fastboot flash the stock boot.img , sudo fastboot flash boot boot.img --slot all
I only read the op (first post here);but I betcha that would have worked. Then sudo ./flash-all.sh and let it do it's thing.