Just got my phone today. I downloaded the toolkit and unlocked my bootloader, rooted, have twrp, and decided to try resurrection remix. Everything seemed fine booted up with root access. Put my SIM card in and have zero cellular connection. It's not the sim because it works fine in my 7+. When you go to the settings it shows that it's reading my phone number but it says cellular radio is off. I've tried flashing the modem again and tried the latest lineage build and same thing. Any suggestions?
Who is the provider?
Have you confirmed proper radio mode is set in settings or *#*#4636#*#* ?
gpz1100 said:
Who is the provider?
Have you confirmed proper radio mode is set in settings or *#*#4636#*#* ?
Click to expand...
Click to collapse
T-Mobile is the provider. Yes I've checked the phone menu and the default setting for "cellular radio power" is off. When I toggle it nothing changes. I've just went back stock and no network either. I never put my sim in before I started rooting and stuff earlier so I'm not sure if it was like this before I got it.
Which bootstack did you install? B15 or B19? If i'm not mistaken, RR needs b15, not b19. Looking at the first few posts in the RR thread it's unclear. But, since it's based on LOS, I believe B15 is the correct one.
gpz1100 said:
Which bootstack did you install? B15 or B19? If i'm not mistaken, RR needs b15, not b19. Looking at the first few posts in the RR thread it's unclear. But, since it's based on LOS, I believe B15 is the correct one.
Click to expand...
Click to collapse
Yeah I think I may have flashed b15. But I did just flash stock with b19 like the post said to do and still no luck. Tried a friends sim too. I'm stumped lol
I'm not sure. I haven't tried RR recently.
Can you post a screen shot of what the status bar looks like?
gpz1100 said:
I'm not sure. I haven't tried RR recently.
Can you post a screen shot of what the status bar looks like?
Click to expand...
Click to collapse
Took a pic. Didn't feel like swapping sims again. Pic is of a screenshot I took earlier. When the sim isn't installed it shows a SIM card instead of the bars with no signal.
https://imgur.com/a/EaMBx
EricSchroeder87 said:
Just got my phone today. I downloaded the toolkit and unlocked my bootloader, rooted, have twrp, and decided to try resurrection remix. Everything seemed fine booted up with root access. Put my SIM card in and have zero cellular connection. It's not the sim because it works fine in my 7+. When you go to the settings it shows that it's reading my phone number but it says cellular radio is off. I've tried flashing the modem again and tried the latest lineage build and same thing. Any suggestions?
Click to expand...
Click to collapse
Flash the universal bootstack and modem for the u variant from the lineage os XDA thread. This should fix the issue.
Vurio said:
Flash the universal bootstack and modem for the u variant from the lineage os XDA thread. This should fix the issue.
Click to expand...
Click to collapse
Tried that too. Unfortunately it didn't work. Sent the phone back to amazon assuming it's a hardware issue.
Related
I restored my stock ROM which was backuped by TWRP. I installed various ROMs before but never faced this typo network issue. But now facing 3G network problem. I tested , there's no problem with the network provider. Installed CM12, but still it's EDGE. When I'm clicking 3G the sim card turns to 'No Service'.
Any solution for this? Please
[email protected] said:
I restored my stock ROM which was backuped by TWRP. I installed various ROMs before but never faced this typo network issue. But now facing 3G network problem. I tested , there's no problem with the network provider. Installed CM12, but still it's EDGE. When I'm clicking 3G the sim card turns to 'No Service'.
Any solution for this? Please
Click to expand...
Click to collapse
change SIM in slot
itsmedRb said:
change SIM in slot
Click to expand...
Click to collapse
No Result
Try remove "persist.radio.multisim.config=dsds" from build.prop
I know, this may sound irrelevant, but anyway, which base firmware was you on before installing CM? Check 'About' section.
There seems to be some bugs in our phone, when you install CM over old stock firmwares. Well, I'm not sure. But try flashing the latest firmware (it's A3 for G360H), then install CM over it by following the regular steps. I'm repeating again, I'm just speculating, not sure.
AtomR said:
I know, this may sound irrelevant, but anyway, which base firmware was you on before installing CM? Check 'About' section.
There seems to be some bugs in our phone, when you install CM over old stock firmwares. Well, I'm not sure. But try flashing the latest firmware (it's A3 for G360H), then install CM over it by following the regular steps. I'm repeating again, I'm just speculating, not sure.
Click to expand...
Click to collapse
The Baseband version is G360HDDU0ANL3
But I installed CM by formatting everything via TWRP!!
[email protected] said:
The Baseband version is G360HDDU0ANL3
But I installed CM by formatting everything via TWRP!!
Click to expand...
Click to collapse
Uh, that's a pretty old firmware, I think.
I know, we all install CM by format everything. I just have a thought that the firmware on which you install CM, affects the CM as well.
For now, try format everything again. Flash the A3 firmware using Odin. Then flash CM again, by following necessary instructions.
Do it, only if you're free/willing to do. I'm only 50% sure about this firmware thingy has any effects on CM. Lol.
Maybe your efs has been corrupt. Check your IMEI go to phone, dial *#06# see if your IMEI is all 0.
Hello, first of all I want to let you know that I am not an expert but have so far been able to convert my Axon A2017 to the US A2017U version.
Big thanks [email protected] for supplying the necessary files.
I have:
-unlocked the bootloader
-rooted the phone
-flashed successfully B20
However, When I upgraded to B29, I lost TWRP and the cell radio of the phone is non-responsive. It won't even turn on. Bootloader is sill unlocked. I made phone calls on my T-mobile network when it was the origional A2017 B8 version. So I believe the bandwidths are compatible.
I have already done the following troubleshooting: (note: WIFI currently works just fine)
-My network is with T-Mobile, and I have been using a different axon A2017U for over a year with no problems.
-When I type *#*#4636#*#* and got to phone Info says, GSM Service: Radio Off, and the Turn on Radio button does nothing.
- I have tried working with every setting in this menu with no luck.
-When I insert my SIM card that is working on my current axon 7 into the converted A2017U, it is able to pick up T-Mobile network u.s. LTE, (fast.tmobile.com) and T-Mobile US (tmus). However, there are no bars because the radio is not turned on.
-When I try to search for new networks an error message saying, "network search cannot proceed when the data service is enabled disabled it?" So I disable it and nothing happens except for an error message saying "error while searching for Networks".
-In network mode I have switched to every option available, LTE/wcdma/GSM, wcdma/GSM, and GSM only with no result.
I am currently running Android version 6.0.1 on build B-29. Any help to get the radio up and running to receive phone calls would be greatly appreciated. Everything else is working except for the phone radio to send and receive phone calls.
Thanks for any Help.
Do you still have your IMEI or did the partition get corrupted?
ultramag69 said:
Do you still have your IMEI or did the partition get corrupted?
Click to expand...
Click to collapse
I check the number with several online checks, as well as T-Mobile, and they are unable to bring up any information about the number. I imagine it got blocked or corrupted during the upgrades.
What do I do to unblock it or make it functional again?
Go to settings>About>Status and check your IMEI number. If it's blank its noyt gonna work on any network...
You might be able to restore it if you have a backup of it - no-one will give you their backup as you then have their phone - or as a last resort, you might need to restore to the stock Chinese Rom again and see if that fixes it...
Good luck, I'm off to bed after a long backshift...
ultramag69 said:
Go to settings>About>Status and check your IMEI number. If it's blank its noyt gonna work on any network...
You might be able to restore it if you have a backup of it - no-one will give you their backup as you then have their phone - or as a last resort, you might need to restore to the stock Chinese Rom again and see if that fixes it...
Good luck, I'm off to bed after a long backshift...
Click to expand...
Click to collapse
Thankfully the numbers are there on both IMEI slot 1 and IMEI Slot 2. Thanks for your help. I hope to hear from you after a good night of rest.
Flash the correct modem/bootstack for your device.
Shipcaptian said:
Thankfully the numbers are there on both IMEI slot 1 and IMEI Slot 2. Thanks for your help. I hope to hear from you after a good night of rest.
Click to expand...
Click to collapse
Just go to the LineageOS thread and download the A2017 modem file, then just flash it
Choose an username... said:
Just go to the LineageOS thread and download the A2017 modem file, then just flash it
Click to expand...
Click to collapse
Sounds Good
Will I need TWRP to flash it or can is just use the Reg. recovery system?
Shipcaptian said:
Sounds Good
Will I need TWRP to flash it or can is just use the Reg. recovery system?
Click to expand...
Click to collapse
You need TWRP. Just install it with axon7tool via edl if you don't have fastboot, or try axon7toolkit
Choose an username... said:
You need TWRP. Just install it with axon7tool via edl if you don't have fastboot, or try axon7toolkit
Click to expand...
Click to collapse
Here's the latest update:
I loaded TWRP onto the phone and installed the file A2017U_N_Modem.zip. (Several Times)
nothing has changed. The radio is still turned off and no signal is being picked up from my carrier T-Mobile.
While loading it says: Loading A2017U_N_Modem for nougat system. I am not running nougat and I cannot find any other modem to download. Will that make a difference?
Any other suggestions are welcome?
Shipcaptian said:
Here's the latest update:
I loaded TWRP onto the phone and installed the file A2017U_N_Modem.zip. (Several Times)
nothing has changed. The radio is still turned off and no signal is being picked up from my carrier T-Mobile.
While loading it says: Loading A2017U_N_Modem for nougat system. I am not running nougat and I cannot find any other modem to download. Will that make a difference?
Any other suggestions are welcome?
Click to expand...
Click to collapse
You need to flash the A2017 modem, not the A2017U one
Here: https://www.androidfilehost.com/?fid=457095661767137840
bkores said:
You need to flash the A2017 modem, not the A2017U one
Here: https://www.androidfilehost.com/?fid=457095661767137840
Click to expand...
Click to collapse
Okay it works! I've got signal but when I try to make a phone call and my other phone picks up I can't hear or say anything. Any idea what's happening? I have tried refreshing the signal with no luck.
Hey man, I'm having the same problem with my Axon 7, brand new A2017U. Turned it on for the first time and I haven't had an ounce of radio on. Same things you've tried I've tried and it refuses to work. Mine is not rooted and I don't want to. I've tried downgrading my update and to no avail. Factory reset etc. I've contacted ZTE and they said they have forwarded my details and my phone details, storage size, color etc. To the necessary representatives. I think I'm gonna be sent a replacement, but just wanted to let you know your not alone.
Many of you might have seen that after flashing custom ROMs and rebooting the phone with that ROM, Volte worked fine, but as soon as you flash Magisk Root and reboot again, volte is lost and further reboots doesn't seem fix it.
Working around my phone and in magisk I found a temporary solution to recover volte for calls.
***Solution***
After flashing Magisk Root, reboot your phone normally, you won't see Volte option for calls, now all you have to do is open Magisk Manager and swipe from left and look for "Magisk Hide", click on it (you'll see lots of system files), in the search bar search for 'phone services', phone services option will come up with a checkbox, click on that checkbox, your network will reset for a few second and will be back with Volte working.
I've attached some screenshots for better understanding.
**note that after every reboot you'll have to perform this procedure again n again to gain volte**
HOPE THIS HELPS Hit Thanks
Which ROM you are using right now.?
Did you flashed stock ROM.? because by flashing stock ROM IMEI shows "0", however I have recover IMEI but I won't able to get back volte.
akshu2697 said:
Which ROM you are using right now.?
Did you flashed stock ROM.? because by flashing stock ROM IMEI shows "0", however I have recover IMEI but I won't able to get back volte.
Click to expand...
Click to collapse
Earlier I was using Oreo Custom Rom (FireHound) then I went back to stock (at this moment the IMEI lost).. right now I'm using AtomicOs Oreo.
If you want to use VoLte do the steps which I posted above regarding magisk. Hope that helps.
Well, my friend, I think Volte worked for me even if I didn't follow the above steps. Maybe regaining LTE is the main part. Nice tuto by the way.
ROM: Atomic OS latest
Not working
I flashed stock with 64 bit recovery installed, which, I think, is the reason of IMEI lost. (I flashed stock to re-gain VoLte , 4g was working fine)
But soon after booting stock, IMEI went to 0 or NA in many cases.
Going back to any 8.1 ROM gets back previous imei and 3g but 4g or volte. This story is going on since past 2 months.
And, this method doesnt do anything except resetting network and finding only 3g again.
blaze_me said:
Well, my friend, I think Volte worked for me even if I didn't follow the above steps. Maybe regaining LTE is the main part. Nice tuto by the way.
ROM: Atomic OS latest
Click to expand...
Click to collapse
Yeah you are right, but sometimes for few people VoLte didn't worked..
sujay kumar said:
I flashed stock with 64 bit recovery installed, which, I think, is the reason of IMEI lost. (I flashed stock to re-gain VoLte , 4g was working fine)
But soon after booting stock, IMEI went to 0 or NA in many cases.
Going back to any 8.1 ROM gets back previous imei and 3g but 4g or volte. This story is going on since past 2 months.
And, this method doesnt do anything except resetting network and finding only 3g again.
Click to expand...
Click to collapse
Yes this method doesn't works if IMEI is lost.. I have wrote this method before IMEI lost not after the IMEI 0.
This will only work for people who still haven't lost their imei and if after flashing VoLte doesn't works.
shad.man92 said:
Yes this method doesn't works if IMEI is lost.. I have wrote this method before IMEI lost not after the IMEI 0.
This will only work for people who still haven't lost their imei and if after flashing VoLte doesn't works.
Click to expand...
Click to collapse
Anything for losers like us?
sujay kumar said:
Anything for losers like us?
Click to expand...
Click to collapse
Which ROM are you currently using?
I am currently working on HOW TO RECOVER 4G NETWORK after IMEI lost, and I can now manually search 4G network and it shows up but I can't connect to that network, it says registering on the network failed. But I'm still working on it. Will update soon.
***update***
Can't fix the 4G issue yet.
shad.man92 said:
Which ROM are you currently using?
Click to expand...
Click to collapse
Liquid remix rom, And this error is not related to any rom. All roms have this issue. Every time I test new rom(which is every week), i hope to recover my volte, atleast 4g, but no success till yet
sujay kumar said:
Liquid remix rom, And this error is not related to any rom. All roms have this issue. Every time I test new rom(which is every week), i hope to recover my volte, atleast 4g, but no success till yet
Click to expand...
Click to collapse
Did you lost your IMEI?
shad.man92 said:
Did you lost your IMEI?
Click to expand...
Click to collapse
YES
sujay kumar said:
YES
Click to expand...
Click to collapse
Then you cannot recover 4G.
You need to get your motherboard changed.
shad.man92 said:
Many of you might have seen that after flashing custom ROMs and rebooting the phone with that ROM, Volte worked fine, but as soon as you flash Magisk Root and reboot again, volte is lost and further reboots doesn't seem fix it.
Working around my phone and in magisk I found a temporary solution to recover volte for calls.
***Solution***
After flashing Magisk Root, reboot your phone normally, you won't see Volte option for calls, now all you have to do is open Magisk Manager and swipe from left and look for "Magisk Hide", click on it (you'll see lots of system files), in the search bar search for 'phone services', phone services option will come up with a checkbox, click on that checkbox, your network will reset for a few second and will be back with Volte working.
I've attached some screenshots for better understanding.
**note that after every reboot you'll have to perform this procedure again n again to gain volte**
HOPE THIS HELPS Hit Thanks
Click to expand...
Click to collapse
Any permenent fix .every boot ican do thats terrible. Now im without magisk any permanent fix please
Joyel said:
Any permenent fix .every boot ican do thats terrible. Now im without magisk any permanent fix please
Click to expand...
Click to collapse
If you want permanent voLte then flash the rom again and don't flash magisk, stay on unrooted device.
My Moto G4 Plus (XT1640) was on Stock Rom 7.0 everything working fine, so i got a OTA update, downloaded it and installed, at first it got bootloop so i forced it to power off (Power button and Volume minus) and rebooted it, but the Simcard doesnt get signal , only recognizes tells my sim number but no signal
I already tried everything, after the problems with the official 8.1 via OTA, i tried to downgrade to Stock Rom 7.0, unlocked bootloader , downgraded to 7.0 and it still doesnt get signal on Simcard and when i check the IMEI it was 0, so i installed TWRP and flashed Arrow OS 9.0 triyng to get IMEI and Simcard signal back, Clean flash i got my IMEI back but the Simcard doesnt get signal, recognizes but i cant do calls or use 4g keeps all the time "No Signal"
So i see installed "Stable Oreo 8.1 OPJ28.111-22" flashed it through TWRP and it is with the same problem no signal ... If anyone can help me pls message me or reply this, i need my phone to work!
https://forum.xda-developers.com/moto-g4-plus/how-to/guide-moto-g4-plus-imei0-issue-t3859068
What does your baseband report as, can you provide the full string (including the line after the .77R)?
Here's a similar thread with some possibly useful help. https://forum.xda-developers.com/moto-g4-plus/help/xt1640-service-update-to-8-1-t3926054 in particular https://forum.xda-developers.com/showpost.php?p=79437813&postcount=14
echo92 said:
What does your baseband report as, can you provide the full string (including the line after the .77R)?
Here's a similar thread with some possibly useful help. https://forum.xda-developers.com/moto-g4-plus/help/xt1640-service-update-to-8-1-t3926054 in particular https://forum.xda-developers.com/showpost.php?p=79437813&postcount=14
Click to expand...
Click to collapse
My Baseband is : M8952_70030.25.03.77R DLFT_FSG
fegama said:
My Baseband is : M8952_70030.25.03.77R DLFT_FSG
Click to expand...
Click to collapse
With that baseband, I'd try downloading the factory firmware (do not flash) and use the programutags.bat as I mentioned in the other post. See if that repairs your device.
shawgluz said:
https://forum.xda-developers.com/moto-g4-plus/how-to/guide-moto-g4-plus-imei0-issue-t3859068
Click to expand...
Click to collapse
My IMEI is ok
https://imgur.com/a/OosRkjG
echo92 said:
With that baseband, I'd try downloading the factory firmware (do not flash) and use the programutags.bat as I mentioned in the other post. See if that repairs your device.
Click to expand...
Click to collapse
Ill try it now if it works ill reply here!
When i opened the .bat it shows it, it doesnt show my country that is Brazil what i do ?
1 - LATAM
2 - APAC
3 - Canada
4 - US
5 - EMEA
6 - Quit
Please select Region:
https://imgur.com/a/LWmKkdl
After i use the programutags.bat i got my signal back for some seconds and lost it another time and now it shows "Only Emergency Calls" i check my IMEI and as u can see on the screenshots, ive lost my IMEI, so i think thats because i lost my IMEI using this that my SIM isnt working, i already try my Sim in another device and it is Ok. What can i do to recover my IMEI ? I have a TWRP EFS Backup that i did on Arrow Os 9.0 with IMEI fine, but with the same problem of signal ... , I tried to flash TWRP and restore this backup,it shows sucessful but my IMEI wasnt back
fegama said:
https://imgur.com/a/LWmKkdl
After i use the programutags.bat i got my signal back for some seconds and lost it another time and now it shows "Only Emergency Calls" i check my IMEI and as u can see on the screenshots, ive lost my IMEI, so i think thats because i lost my IMEI using this that my SIM isnt working, i already try my Sim in another device and it is Ok. What can i do to recover my IMEI ? I have a TWRP EFS Backup that i did on Arrow Os 9.0 with IMEI fine, but with the same problem of signal ... , I tried to flash TWRP and restore this backup,it shows sucessful but my IMEI wasnt back
Click to expand...
Click to collapse
You may have lost your baseband downgrading back to Nougat, since you mentioned you had already updated to stock Nougat.
You could either fastboot flash the Oreo firmware or try this: https://forum.xda-developers.com/moto-g4-plus/how-to/guide-moto-g4-plus-imei0-issue-t3859068
That script should have reprogrammed your hw partition and set the correct parameters for your radio, so I'm not sure what's happened to your baseband.
fegama said:
https://imgur.com/a/LWmKkdl
After i use the programutags.bat i got my signal back for some seconds and lost it another time and now it shows "Only Emergency Calls" i check my IMEI and as u can see on the screenshots, ive lost my IMEI, so i think thats because i lost my IMEI using this that my SIM isnt working, i already try my Sim in another device and it is Ok. What can i do to recover my IMEI ? I have a TWRP EFS Backup that i did on Arrow Os 9.0 with IMEI fine, but with the same problem of signal ... , I tried to flash TWRP and restore this backup,it shows sucessful but my IMEI wasnt back
Click to expand...
Click to collapse
https://forum.xda-developers.com/moto-g4-plus/how-to/guide-moto-g4-plus-imei0-issue-t3859068 i did the proceedments with the terminal app and got my IMEI and signal back, but now i want to try to use Arrow Os 9.0 if i flash it through TWRP will i lose my IMEI and Simcard signal another time ?
fegama said:
https://forum.xda-developers.com/moto-g4-plus/how-to/guide-moto-g4-plus-imei0-issue-t3859068 i did the proceedments with the terminal app and got my IMEI and signal back, but now i want to try to use Arrow Os 9.0 if i flash it through TWRP will i lose my IMEI and Simcard signal another time ?
Click to expand...
Click to collapse
I honestly do not know - your best bet is to backup your EFS using Lyuu's TWRP as recommended in the Arrow OS thread. At least you'll have a copy of your modemst1/modemst2 that hopefully will restore your signal. Then flash ArrowOS and the relevant GApps.
You may lose signal if you revert back to stock firmware.
echo92 said:
I honestly do not know - your best bet is to backup your EFS using Lyuu's TWRP as recommended in the Arrow OS thread. At least you'll have a copy of your modemst1/modemst2 that hopefully will restore your signal. Then flash ArrowOS and the relevant GApps.
You may lose signal if you revert back to stock firmware.
Click to expand...
Click to collapse
Thank you! I already post an update, after two days searching for solutions i finally got it, but i am on Stock ROM 7.0 with ElementalGX Kernel and root that was the requirements https://forum.xda-developers.com/moto-g4-plus/how-to/guide-moto-g4-plus-imei0-issue-t3859068 of this post that i used with your help too, but i dont know if this Kernel is better than the stock kernel, Im interested in flashing Arrow Os 9.0, what do u think is better i stay on the stock 7.0 or flash it ?
fegama said:
Thank you! I already post an update, after two days searching for solutions i finally got it, but i am on Stock ROM 7.0 with ElementalGX Kernel and root that was the requirements https://forum.xda-developers.com/moto-g4-plus/how-to/guide-moto-g4-plus-imei0-issue-t3859068 of this post that i used with your help too, but i dont know if this Kernel is better than the stock kernel, Im interested in flashing Arrow Os 9.0, what do u think is better i stay on the stock 7.0 or flash it ?
Click to expand...
Click to collapse
Again, it's up to you. ElementalX is a good kernel, though it really depends on what you want from your device. If you want stability, then the stock ROM and ElementalX (or flashing the stock Oreo firmware and then ElementalX/loony) are your choices. If you want more customisation, then Arrow OS or another custom ROM are your options. It really is up to you.
echo92 said:
Again, it's up to you. ElementalX is a good kernel, though it really depends on what you want from your device. If you want stability, then the stock ROM and ElementalX (or flashing the stock Oreo firmware and then ElementalX/loony) are your choices. If you want more customisation, then Arrow OS or another custom ROM are your options. It really is up to you.
Click to expand...
Click to collapse
After all this trouble i think is better i stay on the Stock 7.0 with the ElementalX Kernel, i need my phone to work, so ill stay on the stock i spent like 2 days to find the solution lol
Hey,
So I recently acquired an used S7 edge, so my first thought was hey I'm gonna flash lineage os on this, so I flash the unofficial lineage os 16 rom to it, after that I'mm setting it up I'm all done I put my sim in it and I'mm getting no signal, so I had no clue what was going on, i thought to myself maybe its just a bug from linage os 16, so I decided to see if lineage os 15.1 would work, so i flash it, when I get to the set up screen I get the SIM network unlock PIN message, so i google around and it tells me to call my carrier (which I did) but that didn't solve anything. I looked around some solutions online like dr.phone and some shady apps, nothing works, so I'm kinda desperate I don't know how to unlock my sim card, I tried re-flashing linage 16 but now my sim is not even being recognized anymore( before at least I got the no signal icon).
if anyone could give me any advice or tell me what to do it would be great, my knowledge goes from googling stuff to flashing a rom through twrp that's about it.
Thanks.
Eolo The Moron said:
Hey,
So I recently acquired an used S7 edge, so my first thought was hey I'm gonna flash lineage os on this, so I flash the unofficial lineage os 16 rom to it, after that I'mm setting it up I'm all done I put my sim in it and I'mm getting no signal, so I had no clue what was going on, i thought to myself maybe its just a bug from linage os 16, so I decided to see if lineage os 15.1 would work, so i flash it, when I get to the set up screen I get the SIM network unlock PIN message, so i google around and it tells me to call my carrier (which I did) but that didn't solve anything. I looked around some solutions online like dr.phone and some shady apps, nothing works, so I'm kinda desperate I don't know how to unlock my sim card, I tried re-flashing linage 16 but now my sim is not even being recognized anymore( before at least I got the no signal icon).
if anyone could give me any advice or tell me what to do it would be great, my knowledge goes from googling stuff to flashing a rom through twrp that's about it.
Thanks.
Click to expand...
Click to collapse
Personally I'd start from scratch, flash stock using Odin.
so you didnt check if phone is ok when u bought it?
check if you have IMEI in settings, check if its been on stolen list.
but first flash stock rom with sim inside
Aimless Rambler said:
Personally I'd start from scratch, flash stock using Odin.
Click to expand...
Click to collapse
I installed stock firmware and it recognizes the sim, but in any rom I try to install its not recognized, so far I have tried lineage 16, 14.1, resurrection remix and pixel experience all of them to insert sim card. I really don't want to use stock firmware though its really bloaty.
yaro666 said:
so you didnt check if phone is ok when u bought it?
check if you have IMEI in settings, check if its been on stolen list.
but first flash stock rom with sim inside
Click to expand...
Click to collapse
It was my friend phone, and it was working when I bought it. When i flashed lineage os it didnt recognize that the sim was inserted.
i have a very similar problem
i have a very similar problem I tried to flash lineage os on my pnone but the sim would not even show just emergency calls only I restored the efs partition but still couldn't call or anything no network tried this with 16 and 15.1 both did the same very disappointing and no answers to be found around apparently this is a rare problem
Adam Darroll said:
i have a very similar problem I tried to flash lineage os on my pnone but the sim would not even show just emergency calls only I restored the efs partition but still couldn't call or anything no network tried this with 16 and 15.1 both did the same very disappointing and no answers to be found around apparently this is a rare problem
Click to expand...
Click to collapse
it's not rare. you probably need to update radio, but make sure you have EFS backup or just go back to stock