SM Bus Controller failed to install Win7 x64 - LG V20 Questions & Answers

I'm trying to use LG PC Suite and LG Bridge on a laptop running Windows 7 x64 Pro. I have updated the chipset with the latest driver, but every time I try to install the LG drivers, the SM Bus Controller fails to install. The PC cannot see the device, even though I have switched USB mode to file transfer. I have a Mac as well, and the same thing happens there (not recognizing the device is connected via USB). Is the software just way out of date and not yet compatible with the V20, or is there a fix that needs to happen. I'm perfectly comfortable using the command line/terminal or hacking the registry, if that's what it takes...
Thanks to anyone that can help!

I did remove the SM Bus Controller from device manager and then re-installed the LG device driver. It did not attempt to reinstall SM Bus drivers, but instead installed MTP drivers successfully. I had high hopes after that, but it's still not working. Sigh.

bgibson72 said:
I'm trying to use LG PC Suite and LG Bridge on a laptop running Windows 7 x64 Pro. I have updated the chipset with the latest driver, but every time I try to install the LG drivers, the SM Bus Controller fails to install. The PC cannot see the device, even though I have switched USB mode to file transfer. I have a Mac as well, and the same thing happens there (not recognizing the device is connected via USB). Is the software just way out of date and not yet compatible with the V20, or is there a fix that needs to happen. I'm perfectly comfortable using the command line/terminal or hacking the registry, if that's what it takes...
Thanks to anyone that can help!
Click to expand...
Click to collapse
What are you trying to accomplish?
Have you installed minimal adb\fastboot?
Frankly, I don't use Windows or Mac so I am next to no help there.
'Sudo pkg install android-tools-adb android-tools-fastboot' was all I've needed to do.
Is your usb a known good cord? Verify this first. Then, Windows device manager, plug in your phone, watch for something to show on device manager. Click on device, double check there that everything shows as working properly?
If phone is not showing up on a number of computers, make sure USB cable is good.

elijah420 said:
What are you trying to accomplish?
Have you installed minimal adb\fastboot?
Frankly, I don't use Windows or Mac so I am next to no help there.
'Sudo pkg install android-tools-adb android-tools-fastboot' was all I've needed to do.
Is your usb a known good cord? Verify this first. Then, Windows device manager, plug in your phone, watch for something to show on device manager. Click on device, double check there that everything shows as working properly?
If phone is not showing up on a number of computers, make sure USB cable is good.
Click to expand...
Click to collapse
I have adb and fastboot both. I want to connect to the PC/Mac for purposes of synching/sharing music, photos, etc. I could use linux too, but I don't have an VM's or a box spun up with anything atm. Yes, the cord I'm using is a good cord. I can see the internal and SD card when I connect, just can't use the LG apps. Oddly enough, there wasn't anything showing with the yellow sign under Device Manager. I'm guessing it's just a compatibility issue and I should just forget about it and just push files to my device with adb. Oh well--I thought it was worth a shot.

bgibson72 said:
I have adb and fastboot both. I want to connect to the PC/Mac for purposes of synching/sharing music, photos, etc. I could use linux too, but I don't have an VM's or a box spun up with anything atm. Yes, the cord I'm using is a good cord. I can see the internal and SD card when I connect, just can't use the LG apps. Oddly enough, there wasn't anything showing with the yellow sign under Device Manager. I'm guessing it's just a compatibility issue and I should just forget about it and just push files to my device with adb. Oh well--I thought it was worth a shot.
Click to expand...
Click to collapse
I understand now. I don't think I can help you there. I run an owncloud instance, and just back all my hooey up there.. manually tho. Sorry dude.

elijah420 said:
I understand now. I don't think I can help you there. I run an owncloud instance, and just back all my hooey up there.. manually tho. Sorry dude.
Click to expand...
Click to collapse
It's cool, thanks anyway. Just trying to simplify things. Don't ask why I thought the OEM's software was gonna solve that, lol.

Well, tbf, even though I don't use it (simply because I dislike vendor lock in - owncloud or a sftp session is mostly hardware agnostic.) I do understand the idea that one should expect the **** that come on the phone to work properly. It *should* be a selling point - 'our apps work for their stated purpose!'

Related

[Q] What's the micro usb port for?

Does anyone use the micro usb port? I have yet to find a use for it. I can't transfer files with it, charge with it nor are there any peripherals (that I know of) that can use it. I searched around but couldn't find much useful stuff on the port. All I found was this useless video:
**Ok I can't post the video because of more stupid forum rules but just go to youtube.com and append this after the url: /watch?v=1xBVu-IatDQ **
Anyway, if someone has ideas on how this port can be used I'm all ears... Thanks.
dq
It is a file transfer port. you plug a cable into it and into your PCs usb port. works like the ones on your phone.
Does it work for you? Because it doesn't for me. Nothing happens when I plug it into a computer. No automounting on the computer side or indication on the tablet that I can put it into "usb storage mode" like the 2.X Android versions do.
dq
don quixada said:
Does it work for you? Because it doesn't for me. Nothing happens when I plug it into a computer. No automounting on the computer side or indication on the tablet that I can put it into "usb storage mode" like the 2.X Android versions do.
dq
Click to expand...
Click to collapse
What OS are you using on your computer, and have you installed the drivers for it?
don quixada said:
Does it work for you? Because it doesn't for me. Nothing happens when I plug it into a computer. No automounting on the computer side or indication on the tablet that I can put it into "usb storage mode" like the 2.X Android versions do.
dq
Click to expand...
Click to collapse
Computer OS? i just plugged it into my Win7 system and it was there instantly. 3.0 shows up as a media device, which allows both the tablet and the computer to talk to the sdcard at the same time. So you won't see a mount prompt on the tablet. BTW my Incredible2 is running 2.3 and also lets me access the SD card on it and the computer at the same time.
I'm still using an old tiny xp and it worked fine for me just plugged it in and there it was
I tried Gentoo Linux and XP and neither worked. What drivers do I need to install?
I also have access to a Win7 system so I'll try that.
dq
Drivers from acer website.
I have adb installed should this not be enough?
You need none installed. ADB if its running in some form might be interfering. its just a basic driver in windows it uses.
I only run adb-server when I need it and not all the time. I thought that any needed drivers would have been installed when I installed adb.
For my Gentoo machine what should I do? It's not detected at all if I plug it in. My x10 mini and Nexus One are detected no problem and I can mount them and everything so what's up? Is there a kernel module that I need to build?
Thanks.
dq
I had to download these drivers for my xp netbook ,,
http://global-download.acer.com/GDF...A Tab&Step3=A500&OS=a05&LC=en&BC=Acer&SC=PA_6
I agree with Nova 5. The Windows drivers for USB come with the SDK and while you might not think you will have use for the SDK you will. It makes the process of installing custom ROM,s and Recovery Kernels a breeze. You download your zip flashes or recovery images to Win 7 and then you adb push your downloads to the tablet. The alternatives, unless soneone was nice enough to compile you an apk, which most advanced system developers don,t bother with, unless their app is destined for the massees throug Andriod market, is to install a terminal emulator and enter native Unix/Linux shell commands manually. If you aren't a shell cmd expert I suggest you immediatly download the latest Android SDK for Windows and start learning what it can do for you with just 2 or 3 adb push commands which can help you advoid 10's of lines of manually entered Linux shell commands that can do some real damage to your system if you are copying someone elses terminal emulator sh install instructions, don't understand what they do and make 1 simple typing mistake. With adb push you don't even have to get involved in Linux's complicated bit based permission changes to install something at the system level.
Sent from my A500 using xda premium
Yes, well I only really use adb in the same capacity as what you describe-- to root a device. After that busybox can be installed and I can either ssh into the device (which I prefer) or use the terminal on the device itself.
But my problem is the detection of the device once it is plugged into my Linux box. I'm not sure if I need a special driver for that and I'd rather not aimlessly search through the kernel config in order to build one (I've done that before and it's painful!). It's good to know that one can mount it on an external device and still use it simultaneously though. That will save me time in trying to fiddle around with settings in the tablet itself...
dq
don quixada said:
I have adb installed should this not be enough?
Click to expand...
Click to collapse
If you are not able to transfer files Try enabling usb debugging before connecting to pc.
If the tab is not in the usb devices list and it doesn't show up as an unknown device, you might want to try another usb cable. Or another port if you have the Windows and Linux on the same machine and you are trying to connect on the same port.
Sent from my A500 using XDA Premium App
gradyzero said:
I agree with Nova 5. The Windows drivers for USB come with the SDK and while you might not think you will have use for the SDK you will. It makes the process of installing custom ROM,s and Recovery Kernels a breeze. You download your zip flashes or recovery images to Win 7 and then you adb push your downloads to the tablet. The alternatives, unless soneone was nice enough to compile you an apk, which most advanced system developers don,t bother with, unless their app is destined for the massees throug Andriod market, is to install a terminal emulator and enter native Unix/Linux shell commands manually. If you aren't a shell cmd expert I suggest you immediatly download the latest Android SDK for Windows and start learning what it can do for you with just 2 or 3 adb push commands which can help you advoid 10's of lines of manually entered Linux shell commands that can do some real damage to your system if you are copying someone elses terminal emulator sh install instructions, don't understand what they do and make 1 simple typing mistake. With adb push you don't even have to get involved in Linux's complicated bit based permission changes to install something at the system level.
Sent from my A500 using xda premium
Click to expand...
Click to collapse
Not nearly what I was saying. Not even close enough that a bomb would touch it.
Simple answer is my vista and win7 systems accessed the iconia as a media player device requiring no drivers as they are a common system driver. My only comment about ADB was that it might be interfering if it somehow was left running in the background.
I'm not sure what the problem is, but I had to play around with the settings and plug it in several times and finally it showed up. Now I plug it in and the dialog for auto play shows up instantly. When I choose to view files, I get a window with two drives. One is the internal storage and the other is the sd card.
sandiegoan said:
I'm not sure what the problem is, but I had to play around with the settings and plug it in several times and finally it showed up. Now I plug it in and the dialog for auto play shows up instantly. When I choose to view files, I get a window with two drives. One is the internal storage and the other is the sd card.
Click to expand...
Click to collapse
Sometimes mine gets a bit wonky as well. Every now and then, I'll plug it in, get the windows dialogue box asking me what I want to do. I open it up and the box is blank, no drives, nothing. Unplug it, wait a few seconds, pop it back in, and everything is OK. No rhyme or reason, and it doesn't happen all the time.
Quick trick for win7 .
Plug in the device.go into device manager delete its entry and the USB controller it resides on.unplug device.install driver from acer web site.then try the device again.
This works on several USB type issues
Good luck if you don't understand don't try

If anyone knows how to get adb working with the Iconia-

I can't get adb to work with my iconia to save my life... I've tried every driver out there to try to get the device recognized but I can't even get it connected to my computer. I have the mini usb cable and all, and I can copy/paste files into the tablet memory, but whenever I start adb it won't recognize it. How did you guys get yours set up? And I've connected my incredible via adb so I know my sdk kit is legit. Just let me know, thanks-
Oh, and: Iconia is rooted. Also, I've tried to start the device manager (i'm on win7 btw), locate the missing device driver, update driver, and navigate to where I got the acer driver from their website, but to no avail. Could it be my rom? I have a hc 3.1 on there atm. Well, that's about it haha
The ultimate goal is to install native ubuntu on the a500, but I need access to adb first.
officetally said:
I can't get adb to work with my iconia to save my life... I've tried every driver out there to try to get the device recognized but I can't even get it connected to my computer. I have the mini usb cable and all, and I can copy/paste files into the tablet memory, but whenever I start adb it won't recognize it. How did you guys get yours set up? And I've connected my incredible via adb so I know my sdk kit is legit. Just let me know, thanks-
Oh, and: Iconia is rooted. Also, I've tried to start the device manager (i'm on win7 btw), locate the missing device driver, update driver, and navigate to where I got the acer driver from their website, but to no avail. Could it be my rom? I have a hc 3.1 on there atm. Well, that's about it haha
The ultimate goal is to install native ubuntu on the a500, but I need access to adb first.
Click to expand...
Click to collapse
Hmm ... did you install the USB drivers from Acer's support site?
http://support.acer.com/product/default.aspx?modelId=3851
Another option with ADB is to do so via IP. Search the Market for 'adb' and there should be a few apps that will allow you to use ADB over TCP/IP. From your computer, with ADB installed, you'd connect with something like:
adb connect <Tablet's IP address>:<port>
I seem to think port 5555 is the default.
If, after trying this method, you still cannot access/see your tablet (assuming you started ADB services), then you may want to check your SDK.
Best of luck.
officetally said:
I can't get adb to work with my iconia to save my life... I've tried every driver out there to try to get the device recognized but I can't even get it connected to my computer. I have the mini usb cable and all, and I can copy/paste files into the tablet memory, but whenever I start adb it won't recognize it. How did you guys get yours set up? And I've connected my incredible via adb so I know my sdk kit is legit. Just let me know, thanks-
Oh, and: Iconia is rooted. Also, I've tried to start the device manager (i'm on win7 btw), locate the missing device driver, update driver, and navigate to where I got the acer driver from their website, but to no avail. Could it be my rom? I have a hc 3.1 on there atm. Well, that's about it haha
The ultimate goal is to install native ubuntu on the a500, but I need access to adb first.
Click to expand...
Click to collapse
This may sound silly, but have you gone into settings, applications, development, and checked "USB debugging" to on?
kjy2010 said:
This may sound silly, but have you gone into settings, applications, development, and checked "USB debugging" to on?
Click to expand...
Click to collapse
DUDE! Haha, why didn't I think of this?? Thanks a lot man, it worked!
looking335 said:
Hmm ... did you install the USB drivers from Acer's support site?
http://support.acer.com/product/default.aspx?modelId=3851
Another option with ADB is to do so via IP. Search the Market for 'adb' and there should be a few apps that will allow you to use ADB over TCP/IP. From your computer, with ADB installed, you'd connect with something like:
adb connect <Tablet's IP address>:<port>
I seem to think port 5555 is the default.
If, after trying this method, you still cannot access/see your tablet (assuming you started ADB services), then you may want to check your SDK.
Best of luck.
Click to expand...
Click to collapse
And please my op... of course I tried the drivers from acer's site, both of them. And my sdk kit works, just like I said. But thanks!
officetally said:
DUDE! Haha, why didn't I think of this?? Thanks a lot man, it worked!
Click to expand...
Click to collapse
Glad it was something simple!
Sometimes we always overlook the simple things.
But I would not have told on myself.to many other things could blame it on.giggles

[Q] USB-PC Not working?

I'm running OTA 4.0.3 (Acer_AV041_A500_1.033.00_PA_CUS1) rooted with I don't know what tool, but rooted after upgrading to 4.0.3, and using one of the tools found here which was the latest (at the time of rooting). The tablet has an "A500 Root Tools" app which has options to enter APX mode amongst other things.
I'm unable to get my Acer to connect to my PC via USB. I tried using both a mini(?)-usb cable and an A-A cable. My acer makes no notification, and there's no visible, or audible, evidence that anything was connected. USB Debugging enabled and disabled makes no difference. The tablet shows absolutely no sign that anything was plugged in. Nothing in notifications, nothing in any file managers.
Likewise on both a Windows 7 PC, and a Windows Vista machine. No little sound saying I plugged something in. Nothing listed in device manager. Nothing anywhere. The Win7 machine has the Acer drivers installed, as it is the machine I used to root it a few months ago.
Is there some weird ICS toggle that I need to perform to get this working? I know my USB ports are working as I've plugged in USB sticks and it mounts them without issue.
At the end of the day, I'm just wanting to flash my bootloader so that I can install CWM and a custom ROM. If there's a way to do that without needing my PC connected, that would make me equally happy.
Drivers
Anthony820 said:
I'm running OTA 4.0.3 (Acer_AV041_A500_1.033.00_PA_CUS1) rooted with I don't know what tool, but rooted after upgrading to 4.0.3, and using one of the tools found here which was the latest (at the time of rooting). The tablet has an "A500 Root Tools" app which has options to enter APX mode amongst other things.
I'm unable to get my Acer to connect to my PC via USB. I tried using both a mini(?)-usb cable and an A-A cable. My acer makes no notification, and there's no visible, or audible, evidence that anything was connected. USB Debugging enabled and disabled makes no difference. The tablet shows absolutely no sign that anything was plugged in. Nothing in notifications, nothing in any file managers.
Likewise on both a Windows 7 PC, and a Windows Vista machine. No little sound saying I plugged something in. Nothing listed in device manager. Nothing anywhere. The Win7 machine has the Acer drivers installed, as it is the machine I used to root it a few months ago.
Is there some weird ICS toggle that I need to perform to get this working? I know my USB ports are working as I've plugged in USB sticks and it mounts them without issue.
At the end of the day, I'm just wanting to flash my bootloader so that I can install CWM and a custom ROM. If there's a way to do that without needing my PC connected, that would make me equally happy.
Click to expand...
Click to collapse
Reinstall the Acer Drivers and also the Google drivers from the android sdk if u have that installed, if not use the adb_fast.zip attached. For you to successfully flash the BL do not underestimate the importance of having the drivers correctly installed - its the cause of 90% of the problems folks have had - my advice is to keep Device Manager open the whole time so you can see what is or isn't installing - dont proceed with the flash until you are sure they are - else you'll be looking at a downgrade to HC to fix things
you can also use Acer Recovery Installer from the market to install a custom recovery
While I appreciate your help, my issue is not drivers - Windows isn't loading the wrong drivers, or no drivers at all. Windows is showing no sign at all, at all, in device manger, any where, that a tablet has been plugged in. Like wise, the tablet gives ZERO notifications on being plugged in to a PC. Nothing. No sounds. No notification. Nothing.
I was originally using the micro(?) usb slot, and it was not working. I assumed that USB slot was dead. So I went and bought a USB A-A cable - after testing the normal USB slot and established it works - and it, too, does absolutely nothing when plugging the device into a PC.
I've since tested with an Ubuntu 12.04 machine as well. dmesg lists nothing.
Anthony820 said:
While I appreciate your help, my issue is not drivers - Windows isn't loading the wrong drivers, or no drivers at all. Windows is showing no sign at all, at all, in device manger, any where, that a tablet has been plugged in. Like wise, the tablet gives ZERO notifications on being plugged in to a PC. Nothing. No sounds. No notification. Nothing.
I was originally using the micro(?) usb slot, and it was not working. I assumed that USB slot was dead. So I went and bought a USB A-A cable - after testing the normal USB slot and established it works - and it, too, does absolutely nothing when plugging the device into a PC.
I've since tested with an Ubuntu 12.04 machine as well. dmesg lists nothing.
Click to expand...
Click to collapse
open a command prompt on yr adb folder and run "adb devices" what do u see?
List of devices attached.. then nothing but my prompt.
Anthony820 said:
List of devices attached.. then nothing but my prompt.
Click to expand...
Click to collapse
and the adb interface driver thats not showing in device manager?? and you have the acer drivers installed??
All the signs are pointing to no drivers, failing that its sounding like a hardware issue either yr tab or cable - can u try on another pc/laptop?
Tested it on a Win 7 Dell, on a Vista Dell, and on an Ubuntu 12.04 Compaq. None show any sign of the device being connected.
I know my *two* micro USB cords work as my Nooks (color and tablet) have no problem with them. I know the large USB slot works as I've plugged in a keyboard and a USB memory stick and both are immediately detected by android.
I've also done a factory reset on the tab. Problem persists, obviously.
I'm actually setting up stock Win7 on another laptop right now. When it's complete I'll install acer drivers and plug in the tablet. It will be the only USB device, let alone android, to ever be plugged in to it.
Anthony820 said:
Tested it on a Win 7 Dell, on a Vista Dell, and on an Ubuntu 12.04 Compaq. None show any sign of the device being connected.
I know my *two* micro USB cords work as my Nooks (color and tablet) have no problem with them. I know the large USB slot works as I've plugged in a keyboard and a USB memory stick and both are immediately detected by android.
I've also done a factory reset on the tab. Problem persists, obviously.
I'm actually setting up stock Win7 on another laptop right now. When it's complete I'll install acer drivers and plug in the tablet. It will be the only USB device, let alone android, to ever be plugged in to it.
Click to expand...
Click to collapse
cool let us know how u go....oh dont forget the adb drivers too
Same. I feel like it's something on the tablet rather than the PCs. But I don't know how to get 100% stock again without being able to have a PC connection.
Anthony820 said:
Same. I feel like it's something on the tablet rather than the PCs. But I don't know how to get 100% stock again without being able to have a PC connection.
Click to expand...
Click to collapse
The tool you used to root it (icsRoot) also has an unroot tool, which you could have used...I have tried to unroot manually which wasnt easy as I had a pre-rooted rom and I had real trouble getting rid of superuser, but in your case it may be a bit different....Sorry can't give you much help in the unrooting ics dept. Maybe try flashing acer stock rom??? or starting a new thread??
Did you ever solve this problem, I'm pulling my hair out with the same thing.
irishmoe said:
Did you ever solve this problem, I'm pulling my hair out with the same thing.
Click to expand...
Click to collapse
are you trying to flash something or do you mean when you connect yr tab
windowz explorer doesnt show your int/ext storage??
more info needed, what rom and bootloader, what OS on yr pc can u try on a different one, try a different cable and usb port..
have you run the acer drivers setup.exe
did u install the android usb ones
have u opened a command prompt from the folder where adb.exe is and run "adb devices"...does a number show??
when u have device manager open and connect yr cable do you see the drivers install. If they are there then uninstall them, disconnect yr cable and clean boot and reconnect.
If they do not install then manually install by pointing them to the folder you extracted the zip to...for the acer ones, just point it to your c: drive
If windows trys to install them, stop the hardware wizard from searching windows update and manually install them yourself.
If you've tried to flash the bootloader and it hasnt completed for what ever reason - you can strike issues such as yours - again, uninstall, clean boot, reconnect, manual install
I have my own thread here
http://forum.xda-developers.com/showthread.php?t=1776448
but came across this one and thought I'd ask if there was any solution found.
irishmoe said:
I have my own thread here
http://forum.xda-developers.com/showthread.php?t=1776448
but came across this one and thought I'd ask if there was any solution found.
Click to expand...
Click to collapse
ok m8, i havng a look at it now....when u connect to yr pc does win explorer show u yr internal/external storage ok??
Have you tried an app like USB host controller to check the connection on the tablets side?
a.child said:
Have you tried an app like USB host controller to check the connection on the tablets side?
Click to expand...
Click to collapse
I regularly use a memory stick in the usb port so I reckon it's fine
what about the micro-usb port?
a.child said:
what about the micro-usb port?
Click to expand...
Click to collapse
Lost the cable so using the regular port
irishmoe said:
Lost the cable so using the regular port
Click to expand...
Click to collapse
I replied earlier in the other thread m8
U must use the micro USB
irishmoe said:
Lost the cable so using the regular port
Click to expand...
Click to collapse
dibb_nz said:
I replied earlier in the other thread m8
U must use the micro USB
Click to expand...
Click to collapse
That's correct, a straight USB "A to A" won't work. Further, I discovered something else; not all micro-usb cables are created equally! I was using a cable that worked fine on my Thunderbolt phone, would not work at all on my A500. Turned out there's some enhancements to the pinouts on the newer micro-usb devices. So the lesson here is go with the cable that came with the device if at all possible.
Seriously though, give a different micro-usb cable a shot; they're pretty cheap around the interwebz.

Nexus 4 appears as unknown device

Hello, I am trying to connect my nexus 4 to my computer to put some music on. This used to work, but now it is being detected as an unknown device. I tried updating the drivers to the Universal Naked driver, but it just says the best driver is already installed. I tried with USB debugging on and off, no difference. Also tried 2 different usb cables.
Cyanogenmod Version: 10.1.1-mako
Build: JDQ39E
Thank you for any help!
jining said:
Hello, I am trying to connect my nexus 4 to my computer to put some music on. This used to work, but now it is being detected as an unknown device. I tried updating the drivers to the Universal Naked driver, but it just says the best driver is already installed. I tried with USB debugging on and off, no difference. Also tried 2 different usb cables.
Cyanogenmod Version: 10.1.1-mako
Build: JDQ39E
Thank you for any help!
Click to expand...
Click to collapse
What OS are you using? Windows? Mac? A linux distro?
Also, are you sure you're using MTP instead of PTP (Settings > Storage > menu > Usb Computer Connection) ?
You can try to install google's drivers from the android sdk as well.
vorbatello said:
What OS are you using? Windows? Mac? A linux distro?
Also, are you sure you're using MTP instead of PTP (Settings > Storage > menu > Usb Computer Connection) ?
You can try to install google's drivers from the android sdk as well.
Click to expand...
Click to collapse
I am using Windows 7, it was set to PTP, I just set to MTP, but it still does the same thing. I have turned off my USB debugging in the developer menu as well.
jining said:
I am using Windows 7, it was set to PTP, I just set to MTP, but it still does the same thing. I have turned off my USB debugging in the developer menu as well.
Click to expand...
Click to collapse
I know this is a silly thing to ask, but have you tried rebooting your phone? Something like this happened to me before and a reboot fixed it.
Also, if you have a custom kernel, check that you have USB fast charge disabled. And after that fails, try installing google's drivers. Sorry, I'm just spouting out random ideas at this point.
vorbatello said:
I know this is a silly thing to ask, but have you tried rebooting your phone? Something like this happened to me before and a reboot fixed it.
Also, if you have a custom kernel, check that you have USB fast charge disabled. And after that fails, try installing google's drivers. Sorry, I'm just spouting out random ideas at this point.
Click to expand...
Click to collapse
Thanks for the suggestions. I am using Franco kernel, how do I turn off fast charge?
jining said:
Thanks for the suggestions. I am using Franco kernel, how do I turn off fast charge?
Click to expand...
Click to collapse
Use trickster mod and go to the Kernel Specific page. If fast charge is ticked off, there's not much we can do from there.
https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod&hl=en
Also, have you tried to install google's drivers or make a nandroid and reflash a clean rom?
EDIT: You could also try Koush's universal driver: https://plus.google.com/103583939320326217147/posts/BQ5iYJEaaEH
I'm afraid I'm out of ideas at this point
vorbatello said:
Use trickster mod and go to the Kernel Specific page. If fast charge is ticked off, there's not much we can do from there.
https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod&hl=en
Also, have you tried to install google's drivers or make a nandroid and reflash a clean rom?
EDIT: You could also try Koush's universal driver: https://plus.google.com/103583939320326217147/posts/BQ5iYJEaaEH
I'm afraid I'm out of ideas at this point
Click to expand...
Click to collapse
Hmm I am in the trickster mod on the kernel specific screen, but I don't see anything about USB fast charge Where might I get googles drivers? I can't seem to install any drivers because as soon as I uninstall the unknown device, it auto installs some drivers.
Thanks for the help!
jining said:
Hmm I am in the trickster mod on the kernel specific screen, but I don't see anything about USB fast charge Where might I get googles drivers? I can't seem to install any drivers because as soon as I uninstall the unknown device, it auto installs some drivers.
Thanks for the help!
Click to expand...
Click to collapse
So I tried installing the newest Franco kernel Milestone (3), and the USB fast charge is off. I also tried installing a different CM mod, but there is no difference. I also tried installing the universal you gave me, but that didn't work, and i installed the google driver from SDK and that didn't work.
I don't know what else to do...
Hi, try to completly unninstall ALL drivers for nexus, samsung or android related, than install official drivers for nexus 4 and then connect nexus 4. Should work.
maxiiik said:
Hi, try to completly unninstall ALL drivers for nexus, samsung or android related, than install official drivers for nexus 4 and then connect nexus 4. Should work.
Click to expand...
Click to collapse
I tried that, no luck...I don't know what else to do, I have tried 3 different cables. I tried using the drivers that come with the nexus 4 toolkit, but no luck. It charges when plugged in, but i get nothing else. Also it seems like half the time its not even in the device manager as an unrecognized device, and then it intermittently pops up a window saying unrecognized device detected... maybe my USB port is broken on the phone?
Is there something simple I have overlooked to get 4.2.2 to work with my computer?
jining said:
I tried that, no luck...I don't know what else to do, I have tried 3 different cables. I tried using the drivers that come with the nexus 4 toolkit, but no luck. It charges when plugged in, but i get nothing else. Also it seems like half the time its not even in the device manager as an unrecognized device, and then it intermittently pops up a window saying unrecognized device detected... maybe my USB port is broken on the phone?
Is there something simple I have overlooked to get 4.2.2 to work with my computer?
Click to expand...
Click to collapse
Have you managed to solve this? I'm facing almost the same problem!
No, I tried for hours with no luck. I am glad I am not the only one, hopefully a solution will come to us. I have been using airdroid to transfer files from my phone in the mean time.
Im also having the same issue except my computer only recognizes my phone when its connected as a camera.
Sent from my Nexus 4 using xda app-developers app
I am having a similar problem with my daughter's Nexus 4 phone, which is not rooted nor unlocked - it is still completely stock. It was just updated to Android 4.3, however I can't say that this is the cause of the problem because she never attempted to connect her phone to the desktop machine before.
I have a Windows 7 x64 box at home, and spent over two hours last night trying to get the computer to correctly recognize the Nexus 4 phone. I was hoping that the standard MTP Windows driver would handle it perfectly, but no luck. I tried the Google usb drivers, and the ADB interface was recognized, but still no access to the internal storage. I then gave the Naked Drivers a try, and no joy there either.
I am beginning to suspect that the MTP drivers on my desktop are munged, but do not relish the thought of a Win 7 wipe and reinstall.
Anyone else have any ideas?
Thanks much!
I am having a similar problem where I have USB storage set to MTP and Windows doesn't pick it up, whereas PTP Windows will pick up but I can't access any folders other than the camera related folders like DCIM.
So my workaround is doing it the old fashioned way through CMD in windows using adb push.
Example:
Assuming you have all the stuff you want to transfer in a folder called stuff, adb is located in C:\adb, and your folder known as stuff is also in C:\adb:
C:\adb>adb push stuff /data/media/0
The above command starting from the ">" will transfer all files in the folder called stuff to the root of /sdcard. In the N4, /sdcard is symbolically linked to /data/media/0.
Of course you need USB debugging enabled for this to work...
Device Manager (Hopefully this helps)
In the start menu type device manager, in that window you should see android and or something similar at the top. You want to drop the menu down and right click what should say Google ADB Interface and delete it, make sure you check the confirmation box. After reboot your computer! Once booted plug your phone in a viola!!!
I'm having a similar issue.
I can open device manager but there in no Android anything listed. All that comes up when I plug my phone in is 'unrecognized usb device'. I have 5 different cable I have tired. The OS will only bring up the usb error in a USB 3.0 port. It will not do anything if I use the 2.0 port.
I have gone and tried to manually update the drivers through the device manager but when I select the drivers from Android SKD or any of the other driver packs I get an error that it is not a x64 driver.
I found one suggestion about modding the driver to include the device but windows will not even recognize the device other than a unknown usb.
I'm going to have a bricked computer soon. Any help would be appreciated.
Roktgr said:
I'm having a similar issue.
I can open device manager but there in no Android anything listed. All that comes up when I plug my phone in is 'unrecognized usb device'. I have 5 different cable I have tired. The OS will only bring up the usb error in a USB 3.0 port. It will not do anything if I use the 2.0 port.
I have gone and tried to manually update the drivers through the device manager but when I select the drivers from Android SKD or any of the other driver packs I get an error that it is not a x64 driver.
I found one suggestion about modding the driver to include the device but windows will not even recognize the device other than a unknown usb.
I'm going to have a bricked computer soon. Any help would be appreciated.
Click to expand...
Click to collapse
First, Google universal naked drivers xda. Try those. If they don't work go into device manager and go to where it says let me choose drivers from my computer. Then look for the android composite adb interface.
If you're on win 8 you'll need to allow unsigned drivers. Google how to do that
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
First, Google universal naked drivers xda. Try those. If they don't work go into device manager and go to where it says let me choose drivers from my computer. Then look for the android composite adb interface.
If you're on win 8 you'll need to allow unsigned drivers. Google how to do that
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Windows 7x64 on all machines. I am trying this on 2 work computers and getting the same result. I have 2 issues that I think are the root of the issue.
#1 is the phone doesn't do anything in USB debug mode. I keep seeing references to having to approve the computer connection but I haven't seen that yet. I have tired 9 usb ports. 6 on my main computer will not bring anything, not even the usb drive. 3 on the labtop will only bring up a 'unrecognized usb drive'.
#2 is the computer will not recognize the device in anything other than a 'unrecognized usb drive' (UUD). Everyone keeps mentioning the Android Composite ADB interface. It's not there, it doesn't show up or as an option. I can go into the device manager and find the UUD and try and update the driver via the manual method with a disk but it doesn't list any type of hardware that is related to Android or ADB.
Roktgr said:
Windows 7x64 on all machines. I am trying this on 2 work computers and getting the same result. I have 2 issues that I think are the root of the issue.
#1 is the phone doesn't do anything in USB debug mode. I keep seeing references to having to approve the computer connection but I haven't seen that yet. I have tired 9 usb ports. 6 on my main computer will not bring anything, not even the usb drive. 3 on the labtop will only bring up a 'unrecognized usb drive'.
Click to expand...
Click to collapse
Hello,
"#1 is the phone doesn't do anything in USB debug mode." This is normal!
How I experienced the USB debugging option is that, if turned ON:
1. The Nexus does not appear in my Windows env
2. BUT when in recovery mode, I can use the "adb" commands
If USB debugging turned OFF:
1. Then I CAN see the Nexus in my Windows env
2. BUT I cannot use the "adb" commands in recovery mode.
So you definitely need to have the USB debugging option turned off if you want to see your nexus in Windows, IMO
---------- Post added at 04:16 PM ---------- Previous post was at 04:02 PM ----------
Roktgr said:
Windows 7x64 on all machines. I am trying this on 2 work computers and getting the same result. I have 2 issues that I think are the root of the issue.
#2 is the computer will not recognize the device in anything other than a 'unrecognized usb drive' (UUD). Everyone keeps mentioning the Android Composite ADB interface. It's not there, it doesn't show up or as an option. I can go into the device manager and find the UUD and try and update the driver via the manual method with a disk but it doesn't list any type of hardware that is related to Android or ADB.
Click to expand...
Click to collapse
I think you really have an issue with the drivers. I would install the Google USB drivers. Maybe a bit heavy but then you can be sure that drivers are fine:
http://developer.android.com/sdk/win-usb.html

Windows 10 Not Finding My Phone

Hello, I am having a rather strange problem. My PC did the dreaded auto upgrade to windows 10 the other day and I also got a new Nexus 6P. It seems my computer won't recognize my phone, at all, when I plug it in via USB. It's not even showing up in the device manager as a problem, it's like nothing happens at all.
I have
- downloaded and installed the latest google usb driver (right click install)
- downloaded the latest mtp drivers
- downloaded official nexus package from Huawei
- installed ADB and android SDK and also reinstalled the drivers from the SDK manager.
- downloaded some update for windows media player as someone mentioned that could be the problem
- tried different cables
- tried different ports (usb 3 too)
I am really at a loss. My work computer works just fine with it so I know the phone and the cable are okay and other things work on those ports on my home computer. By the way the computer is Windows 10 pro - 64bit
robproctor said:
Hello, I am having a rather strange problem. My PC did the dreaded auto upgrade to windows 10 the other day and I also got a new Nexus 6P. It seems my computer won't recognize my phone, at all, when I plug it in via USB. It's not even showing up in the device manager as a problem, it's like nothing happens at all.
I have
- downloaded and installed the latest google usb driver (right click install)
- downloaded the latest mtp drivers
- downloaded official nexus package from Huawei
- installed ADB and android SDK and also reinstalled the drivers from the SDK manager.
- downloaded some update for windows media player as someone mentioned that could be the problem
- tried different cables
- tried different ports (usb 3 too)
I am really at a loss. My work computer works just fine with it so I know the phone and the cable are okay and other things work on those ports on my home computer. By the way the computer is Windows 10 pro - 64bit
Click to expand...
Click to collapse
Have you installed Google USB Driver for nexus 6p? If not, download Google USB Driver, extract it and save it in your any name folder that you can locate it later, plug n6p in your pc or laptop and it should pop up with USB option to select either file transfer or picture transfer, click one of them, Windows should be able to find n6p driver, if not, go to setting on your pc, device manager, then look at highlighted USB of your nexus 6p whether it is properly installed, if not, then install it by finding the driver that you extracted in that specific folder... Hoping this works for you.
luckyfate said:
Have you installed Google USB Driver for nexus 6p? If not, download Google USB Driver, extract it and save it in your any name folder that you can locate it later, plug n6p in your pc or laptop and it should pop up with USB option to select either file transfer or picture transfer, click one of them, Windows should be able to find n6p driver, if not, go to setting on your pc, device manager, then look at highlighted USB of your nexus 6p whether it is properly installed, if not, then install it by finding the driver that you extracted in that specific folder... Hoping this works for you.
Click to expand...
Click to collapse
Thanks for the response, but yea I already got the new usb drivers and installed them via right click install. The thing is though that in device manager the phone doesnt show up, at all, not even as a problem device. Its like its not there. The phone shows that its charging, but it doesn't recognize that its plugged into a usb port. Im really unsure what to do about this.
robproctor said:
Thanks for the response, but yea I already got the new usb drivers and installed them via right click install. The thing is though that in device manager the phone doesnt show up, at all, not even as a problem device. Its like its not there. The phone shows that its charging, but it doesn't recognize that its plugged into a usb port. Im really unsure what to do about this.
Click to expand...
Click to collapse
Did you install x64 driver from Google USB Driver? Check to see to make sure your USB android debugging is checked. It is kind of odd, try to reboot your pc and nexus 6p, then plug your phone in different USB port if your pc has extra USB port..
luckyfate said:
Did you install x64 driver from Google USB Driver? Check to see to make sure your USB android debugging is checked. It is kind of odd, try to reboot your pc and nexus 6p, then plug your phone in different USB port if your pc has extra USB port..
Click to expand...
Click to collapse
Are you referring to this USB driver? I dont actually see a 64 and 32 version:
https://developer.android.com/studio/run/win-usb.html
robproctor said:
Are you referring to this USB driver? I dont actually see a 64 and 32 version:
https://developer.android.com/studio/run/win-usb.html
Click to expand...
Click to collapse
Should be on top of the folder that your extracted...​
Ah I see what you are referring to. Well, here is the thing, how do I install those drivers? Remember I cant find it device manager to update the drivers. The only way I could find to install them was to right click the android_winusb.inf file and choose install. It said it installed okay, but of course its not working. Any idea?
By the way, I also have usb debugging on and usb configuration WAS set to MTP, but I just changed it to try the different variations, but now its stuck on charging and wont change to MTP, but I think its because the phone isnt being recognized by the computer because this morning at the office I was able to change the usb type to mtp and the others, but that computer recognized the phone... AGHHHH WTF
robproctor said:
Ah I see what you are referring to. Well, here is the thing, how do I install those drivers? Remember I cant find it device manager to update the drivers. The only way I could find to install them was to right click the android_winusb.inf file and choose install. It said it installed okay, but of course its not working. Any idea?
Click to expand...
Click to collapse
By the way, if your Android debugging on or check? Just turn "developer options" on your phone and then check Android Debugging. To install x64 USB Driver, on your pc, control panel, device Manager, look for phone USB Driver to see it has some kind of yellow triangle, if so update x64 driver from your extracted folder...
luckyfate said:
By the way, if your Android debugging on or check? Just turn "developer options" on your phone and then check Android Debugging. To install x64 USB Driver, on your pc, control panel, device Manager, look for phone USB Driver to see it has some kind of yellow triangle, if so update x64 driver from your extracted folder...
Click to expand...
Click to collapse
Hey Lucky, I really appreciate you helping me out here, but just so you know I am no newb with this kinda stuff. I have went through this process on a couple other computers with no problem, so when I say its not showing up in device manager I mean its literally not there. Its not there and just under some other name or with a problem icon, its literally not in the device list. Also, I do have usb debugging on
luckyfate said:
By the way, if your Android debugging on or check? Just turn "developer options" on your phone and then check Android Debugging. To install x64 USB Driver, on your pc, control panel, device Manager, look for phone USB Driver to see it has some kind of yellow triangle, if so update x64 driver from your extracted folder...
Click to expand...
Click to collapse
Please go to YouTube and type "install usb driver on nexus 6p" search and then follow instructions from the video... Good luck.
WAIT! I got it... Wow I would of never thought this, but apprently my Wacom was the problem. As soon as I unplogged my wacom tablet the phone picked right up... Strange... Anyways, case closed... freaking conflicts!
Okay hold on, still having problems. Well, now the computer dings when I plug it in, but it still doesnt show up. However when I change the phone usb to PTP the phone becomes visible on the pc in windows explorer (but still not in device manager) and when I put it to MTP it disconnects and I cant see it in windows explorer anymore, and still cant find it in device manager... Ugh...
Okay sorry for all the messages, but i did get the MTP working. I had to uninstall the reinstall the drivers a couple times... very strange, but whatever its working... yay!
robproctor said:
Okay sorry for all the messages, but i did get the MTP working. I had to uninstall the reinstall the drivers a couple times... very strange, but whatever its working... yay!
Click to expand...
Click to collapse
Did you figure out the problem? I'm having the exact same problem with mine and with USB mode not switching from Charging and the PC not even recognizing a USB device was plugged in.
I found using a different cable solved my problem. Don't really know why cause the first one I used seemed fine and worked to charge it, but by using a different one, Win 10 recognized it and got me in the game.

Categories

Resources