Custom kernel Is Completely New Concept For Meizu M2/Mini Users So I Am Going To Clarify About It In This Post
Note:I am not responsible for any kind of damage to your device nor a developer is responsible for it.You are only&only responsible for it
Important Suggestion Please Take A Recovery Backup Of Boot.img Before proceding
How to Take Backup? See Below
1)Boot To Recovery (TWRP Suggested)
2)Go to backup and restore menu
3)Select Backup
4)In Menu Just Select Backup of Boot.img
5)Create a backup of it. :fingers-crossed:
6)You are done
Requirements
1)Bootloader Unlocked+Custom Recovery flashed
2)Device Specific Meizu M2/Mini
As you guys may noticed in before post of mine about Lineage OS&Resurrection Remix Rom post I have mentioned about custom kernel
So today i am going to clarify it how it works how it make our phone to work more fluently or degrade it performance and many more features of it :fingers-crossed:
First of All A Honourable Mention For Our Developers of Meizu m2 /mini :angel:
Qus1 (Custom kernel Devloper)
Divis 1969 (Custom Rom Developer)
Crezil1 (ROM Porter (Resurrection Remix))
Yusuf (ROM Porter)
Slasher (ROM Porter(Miui))
Vasiliy.Ivanov (Device Tree Founder For M2/Mini)
Remind me if i forget anyone :silly:
So lets Begin!
Custom Kernel
Difference Between Stock Kernel & Custom kernel.
Stock Kernel Is developed by Flyme For there os (which is Preconfigured by them)
There kernel is good for performance and good in ram management but sucks in battery for most people they all complain about battery this is an alternative way to do so
Qus1 Developed Custom kernel Big.Litle is Stable now
Stable Kernel:
Kernel V4.6 Information: Vibration standard. many supplements on the CPU.
Information about V4.6biglittle kernel:
Works with biglittle, optimized governor interactive, interactiveplus; low vibration. With specific Roms improve energy saving process.
Information about kernel V4.7 + 4.7biglittle:
Livedisplay added from source divis1969 support cm, Lineageos& Resurrection Remix.[/SIZE]
Kernel Notes v4.9: added governor: INTERACTIVEPLUS, CONSERVATIVE, THUNDERX (will suit lovers of energy savings); added tcp: BIC, HTCP, HYBLA,added ioscheduler: bfq; added dynamic synchronization fs; Off Gentle fair sleepers; Optimization added battery during charging; added 3 WiFi control mode; added ThunderQuake Engine 1.0 - Vibration Intensity Controller forvibration button and the phone is regulated in the appendix). gestures to awakening on custom bikes, sweep2wake left to right on the screen and off doubletap2wake on screen off. AIC adjustment core functions. original post varun.chitre15, were taken from the changes.
Kernel Notes V4.9biglittle: works with biglittle, optimized governor interactive, interactiveplus (max freq 1170 both); low vibration. Target nucleus improve energy saving process. Core with additions of the CPU can be used as a biglittle, and without.
Starting with V4.9 + 4.9biglittle: ksm added, initially turned off, you can turn on placing script in the system / etc / the init.d / ksmON
I Call It Big.Little Kernel :silly:
Personal Suggestion tested by me So Don't worry
Cons?
Yes it Do Have Cons Too.
What are Those ?
1)If a noob use this and tweak it improperly it can bring very strange Results. :silly:
2)Makes Display Dim so that it can save more power (If you want to use it with brightness increase brightness thats it) (In Kernel) :crying:
3)If you Enable Double Tap to sleep& Double Tap to wake function in Kernel and you stop that function in setting of OS it will still work
4)it has power to change Vibration Control Modifying it again and again can cause a hardware Failure
5)Lowering down power of cpu can cause Deep sleep
Features
1)Big.Little
Presenting you the New Innovative Big.Little Custom kernel For Meizu M2/Mini :laugh:
1)You can modify vibrations level of your device
2)You can enable double tap to wake and double tap to sleep in any rom
3)Can modify frequency of CPU
4)Cpu governers like Interactive plus,ThunderX included
5)Can tweak for IO schedulers
6)Low memory killer
Why it is powerful and How it is useful see it here here
https://www.arm.com/products/processors/technologies/biglittleprocessing.php
Tweaking suggested By kernel Dev Qus1
Download Kernel Auditor
from play store
Open it
And grant Root access
and modify according to your need
My settings
Cpu max frequency 1170Mhz
lowest 299Mhz
Cpu governor Interactive plus or ThunderX
Enable Option Start At Boot and it will start working from next boot
ThunderX Kernel is now implemented in Big.Little Kernel
Is this only available for custom ROM ?
Ans Nope It is available for Flyme too
Download Link of all Custom kernel Available for different roms Choose wisely
For Flyme 4.5.4I
ThunderX :good:
https://yadi.sk/d/X-IttS7R3GPkjo
For Flyme 6.7.23.8 :good:
Big.Little
https://yadi.sk/d/ZP_lV5TG3GXxf3
For Flyme 6.7.4.11G [Beta]
Big.Little
https://yadi.sk/d/er4snR0w3GuTp7
For Flyme 6.1.0.0G [Stable]
Big.Little
https://yadi.sk/d/Zyg2pusl3K45rB
For Cm12.1 :good:
Big.Little
https://yadi.sk/d/V_9jHzkI3GZZAr
Lineage OS (0.4) :good:
Big.Little
https://yadi.sk/d/79Ha6NU83GZYVb
Lineage OS OMS Edition/V5 :good:
Can Be Used With Rom 7.1.2 Lineage OS 14.1.0 too
Big.Little
https://drive.google.com/file/d/0Bz6Fq2POoJTlX254OVB5cEM2Zm8/view?usp=drive_web
XOSP Xperia Open Source Project Custom Kernel :good:
Big.Little
https://drive.google.com/file/d/0Bz6Fq2POoJTlMkRGb2pGcWxaS1E/view
Xenon HD Custom Kernel :good:
Big.Little
https://drive.google.com/file/d/0Bz6Fq2POoJTlM0RaQVR6dFRPYUE/view
CrDroid Custom Kernel :good:
Big.Little
https://drive.google.com/open?id=0Bz6Fq2POoJTlT2duQ3VjV3BSdlk
Aosp Extended Custom Kernel :good:
Big.Little
https://drive.google.com/open?id=0Bz6Fq2POoJTlOG9HYk9GU0RmVFE
Resurrection Remix 5.8.3 Custom Kernel :good:
Note:This Can Be Used With RR 5.8.3 Compiled from source by Crezil 1
Big.Little
https://yadi.sk/d/tZBEK4aU3HKumm
MIUI :good:
MIUI8 8.1.3.0 Global latest stable
ThunderX
https://yadi.sk/d/Z8cciroC3GHjcG
MIUI8 7.1.1.2
ThunderX
https://yadi.sk/d/WeTx3Ya43FoXtS
MIUI 7.6.8
https://yadi.sk/d/rz7H6bNF3K43Hk
Kernel Sources
Get it here!
https://github.com/divis1969/android_kernel_meizu_meilan2
Dont Liked This Kernel? Simply restore your backup
How to Take Restore a Backup? See Below
1)Boot To Recovery (TWRP Suggested)
2)Go to backup and restore menu
3)Select Restore
4)In Menu Just Select Backup file of Boot.img
5)Just Tap on it swipe it and restore your backup :fingers-crossed:
6)You are done
Credits Goes To Our Beloved Custom Kernel Dev Qus1
Hit Thumbs Up :good: :good: if you found this useful
Suggestions Are Welcomed :good:
Comment Down your Opinion :good:
Regards~
Murtaza Piplod
Bootloop
Hi, I have the rom 7.1.2 Lineage OS 14.1.0 - Nougat Source 2017 installed on my Meizu M2 mini and when I try to install this custom kernel I go the recovery, install the zip and then wipe dalvik & cache but then when I reboot to the system I always get a bootlop and I need to restore the original boot. Any idea of what's the problem? Thanks
I installed it on CM12.1 v0.13 but now how to change vibration intensity?
Edit: Okay got it, from ThunderZap app
how to get this????
Resurrection Remix-N-v5.8.5 L-ROM.RU for MEIZU M2 Mini VIP.
Link: http://l-rom.ru/topic/254-resurrection-remix-n-v585*-l-romru-for-meizu-m2-mini/
techno_crysis said:
how to get this????
Resurrection Remix-N-v5.8.5 L-ROM.RU for MEIZU M2 Mini VIP.
Link: http://l-rom.ru/topic/254-resurrection-remix-n-v585*-l-romru-for-meizu-m2-mini/
Click to expand...
Click to collapse
Apparently our dear friend lunik loves to keep his work for himself and brag about it. He's afraid people will post it elsewhere (i.e xda) and all people will go to these websites except his.
TL;DR: Befriend him
What about battery life with this kernel? How many days phone work on single charging? SOT - how many hours?
S_O_L_92 said:
What about battery life with this kernel? How many days phone work on single charging? SOT - how many hours?
Click to expand...
Click to collapse
I'm on CM 12.1 using this kernel and the battery lasts all day with average usage. With intensive usage it barely finishes the day
I don't know how to install the kernel.
Charistom said:
I don't know how to install the kernel.
Click to expand...
Click to collapse
You have to flash the zip from twrp.
All links got restricted why?
adarshm4you said:
All links got restricted why?
Click to expand...
Click to collapse
Qus 1 account deleted from yandex :/ I can't help in this
murtaza1326 said:
Qus 1 account deleted from yandex :/ I can't help in this
Click to expand...
Click to collapse
Just want to try miui 9 beta u posted.I didn't have that custom kernal.Its ok.
murtaza1326 said:
Qus 1 account deleted from yandex :/ I can't help in this
Click to expand...
Click to collapse
I think that account is not deleted.I can download kernel from cm 12.1 post.
adarshm4you said:
I think that account is not deleted.I can download kernel from cm 12.1 post.
Click to expand...
Click to collapse
i don't know he said me in pm :v that his old files are no longwr available and his account is deleted
may be he created new one
Tweaked as you said.What you mean by brightness will be reduced?I didnt experienced it.No much idea about this customing yet.Atleast I tried it now.I didn't find thunder x in cpu governor.Only interactive I found.Can you share some more settings that i can easily and safely done in kernal adiutor.As you said I am taking much caution on every step I do in it.I know if something gone wrong,my phone will be dead.
Sorry am commenting on a wrong forum. There is no Thread for my phone. Without a custom kernel, can someone flash Nougat ROM. I am using Gionee to be precise. I have tried many Nougat ROM but none of them booted.
Please help.
blogthetech said:
Sorry am commenting on a wrong forum. There is no Thread for my phone. Without a custom kernel, can someone flash Nougat ROM. I am using Gionee to be precise. I have tried many Nougat ROM but none of them booted.
Please help.
Click to expand...
Click to collapse
You can flash noughat if the rom is supported by your phone but in most cases it will not bootup if you don't have custom kernal.
Pretty good!
Related
This thread will be about changes i have made to the device trees for the t700,t705,t800,t805 which should in the long run make maintaining the variants a lot easier the primary changes i have done are combine all 4 of the variants into 1 kernel source as well as make a common device tree so they can inherit everything that is the same across devices.
Kernel Changes:
The Base kernel from Cyanogenmod supports klimtwifi (T700) and klimtlte (T705) to add support for chagallwifi (T800) all that is needed is to add its defconfig which is this file
https://github.com/LiquidSmooth-Dev...arch/arm/configs/deathly_chagalllte_defconfig
To add support for the Chagallte (T805) it was a little more complicated for to do but very simple for you guys for a little background T805 is exactly the same chipset as the other Galaxy Tab S's except for whatever reason Samsung decided to put a different gpu (Midgard_wk04) everyone else uses a mali_t6xx.
The stuff developers actually need to support Chagalllte are the following:
Defconfig:
https://github.com/LiquidSmooth-Dev...arch/arm/configs/deathly_chagalllte_defconfig
The GPU addition commit:
https://github.com/LiquidSmooth-Dev...mmit/c8e96e86c902cbc2b13d34e7e7158623eacf5d84
Bam that was easy now any kernel can support all 4 main variants of the Tab S
Device tree and vendor repos
First part i want to place links to all of the stuff that's needed to make a rom for each device in one place.
(Disclaimer the trees will be LiquidSmooth but it is very easy to convert them to any rom)
Klimtwifi (T700):
https://github.com/LiquidSmooth-Devices/android_device_samsung_klimtwifi
https://github.com/TheMuppets/proprietary_vendor_samsung/tree/cm-12.1/klimtwifi
Klimtlte (T705)
https://github.com/LiquidSmooth-Devices/android_device_samsung_klimtlte
https://github.com/schwabe93/vendor_samsung_klimtlte
Chagallwifi (T800)
https://github.com/LiquidSmooth-Devices/android_device_samsung_chagallwifi
https://github.com/diego-cr/android_vendor_samsung_chagallwifi
Chagalllte (T805)
https://github.com/LiquidSmooth-Devices/android_device_samsung_chagalllte
https://github.com/Andrewt12/android_vendor_samsung_chagalllte
WIP Common Device Tree:
When bringing up support for LiquidSmooth for these devices i noticed that they are all pretty much copied each other (which makes sense) but because of it there was tons of duplicated code between the devices so i decided to make a common device tree so any future code changes could be placed in one place instead of over 4 device trees. This is still a WIP because i do not have all the devices so i can not test them all in my eyes they should all work fine. The common device tree will also hopefully will be rom independent so no changes would be needed on a per rom basis. I can for sure say klimtwifi and chagallwifi work with my common tree, Chagalllte and klimtlte need to be tested still.
Common Device tree repo:
https://github.com/LiquidSmooth-Devices/android_device_samsung_exynos5420-common
Common device tree migration commits
Klimtwifi:
https://github.com/LiquidSmooth-Dev...mmit/444b4fc08f82eeeabe8e0a533539fe0c2fadd723
https://github.com/LiquidSmooth-Dev...mmit/cdf5f06c8a29bb237b964d5ee602d151c6323677
Klimtlte:
https://github.com/LiquidSmooth-Dev...mmit/8570d466e2b5b88c316c7f1576bf8ea9051c5e2a
Chagallwifi:
https://github.com/LiquidSmooth-Dev...mmit/5be51eb30283355109c65513ea209dd1d6855ff2
Chagalllte:
https://github.com/LiquidSmooth-Dev...mmit/5ff21d73a9cad3f7f9cf7f79b29bdbab0d8b2b1e
One more improvement that myself and @diegocr made was finally made a pernament fix to Chagallwifi's (T800) wifi issue he made a custom release tool in the device tree to make it so you would not have to manually patch it every time. I then took that and fixed the root of the issue which was that the vendor repo was not putting the files in the right spot. (My orig commit also did egl but that was not needed) the commit that did it is this:
https://github.com/diego-cr/android...mmit/1fc5135eda985ddc159f8465ee114e67aa5dfcae
Now into the features of my Deathly kernel
XDA:DevDB Information
[Dev Info] [Deathly Kernel] [AOSP] [Lollipop 5.1.1], Kernel for the Samsung Galaxy Tab S
Contributors
deadman96385
Kernel Special Features:
Version Information
Status: Testing
Created 2015-06-22
Last Updated 2015-06-21
Deathly Kernel
I have had a deathly kernel on most devices i own the goal of it is to get as many options and features into a kernel but still be stable. For the Tab S i took the aosp cm base and have updated it against kernel.org from 3.4.105 too 3.4.108 along with pull in a bunch of features from other exynos 5420 devices
As you read above i have made a common tree which changes the ramdisk so i have to provide two zips one with the new format one with old format currently the only rom that i personally have built with the new version is the latest klimtwifi and chagawifi all other roms will boot loop with it so use the old version
Currently i only have flashable for Klimtwifi (T700) i will generate the others once i get back from my trip.
New Ramdisk option:
http://www.drdevs.com/devs/teamliquid/Kernels/klimtwifi/New_format/
Old Ramdisk option:
http://www.drdevs.com/devs/teamliquid/Kernels/klimtwifi/Old_format/
Features of the Deathly kernel:
Will support all 4 main tab s devices (will add support for the US carrier variants if aosp is brought up)
CPU Voltage Control
CPU OverClock/UnderClock
GPU Voltage Control
GPU OverClock/UnderClock
MIF/INT Voltage Control (I will not show how to configure this if you know how too then you can)
Wolfson Sound Control Thanks to oloendithas for fixing it for stereo out
UKSM instead of KSM
Added the following IO Schedulers: fifo, fiops, sioplus, tripndroid, vr, zen, bfq (Default)
Full f2fs support updated off the mainline (Stock cm kernel has limited support)
Modified Thermal Throttling temperatures for all devices so hopefully they won't get as hot (WIP)
Android Logger disabled by default can be enabled over sysfs
Exynos thermal exposed to sysfs
WQ power efficient workqueues (Still need to apply in more places)
Frandom Support
Readahead bumped to 256 from 128
Details how to configure all of the features i will add the rest once i come back
GPU Configuration:
To configure the max or min gpu frequency you would go to either of the following files in a root enabled file browser and change the value inside
/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq_gpu
/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq_gpu
The allowed values for the files are as followed:
667, 600, 533, 480, 420, 350, 266, 177, 100
T800 owners the default min gpu freq is 100 on all roms if that causes issues raise the min freq to 266 you will probably not notice a battery decreases if that still does not work let me know i'll take a look at the code.
Reserved
Reserved
Thanks, working great on CM12.
Thank you man.. Im glad someone finely separated the device tree... And specially Happy about a new kernel that I can use in my Project Roms.
With all Credits going to you of course.. thanks again.
Hey mate, thanks for this!
I'm a little unsure about the new and old ramdisk thingy.
Running aicp on my klmitwifi, new ramdisk is cool?
Will try anyway, but let me know please!
Edit :
just checked, didn't stupidly before, Looks like the kernel is baked in your AICP rom.
Thanks again for your hard work!
Edit edit:
tried the v02 on the rom mentioned, had to revert cause I was having many ui fc.
Used new ramdisk version, could be that or I should have done a clean flash maybe?
Thanks for this, hopefully if fixes the lag issue for me on CM12 with the T800.
Thanks for all the hard work, grid .1 and .2 both worked perfect on bliss rom
Thanks, I will use your kernel on my chagallwifi SlimLP builds
Wait, does the Deathly kernel already in CarbonROM for T700 have F2FS support already? Or is that for the New Version and not yet built for klimtwifi? Thanks
SkOrPn said:
Wait, does the Deathly kernel already in CarbonROM for T700 have F2FS support already? Or is that for the New Version and not yet built for klimtwifi? Thanks
Click to expand...
Click to collapse
The f2fs version in the carbon build is not updated like it is now so i can not guarantee it works the next build will work though
deadman96385 said:
The f2fs version in the carbon build is not updated like it is now so i can not guarantee it works the next build will work though
Click to expand...
Click to collapse
OK, thanks. Hope your enjoying your time off... :good:
I'm going to backup your kernel and try ashyx's new build released today. Its closer to stock but has F2FS support also. Then I will test yours once its updated. Loving this new tab of mine, almost forgot how much fun it was trying to find the sweet spot on a device, lol. My Nexus 7 found its sweet spot a long time ago and now its just a plain ole boring tablet. hehe
diegocr said:
Thanks, I will use your kernel on my chagallwifi SlimLP builds
Click to expand...
Click to collapse
...Slim LP, for t800 maybe, where to find it?
m.
meduza2 said:
...Slim LP, for t800 maybe, where to find it?
m.
Click to expand...
Click to collapse
In SlimRoms Builders Collective
diegocr said:
In SlimRoms Builders Collective
Click to expand...
Click to collapse
...nice Do you intend to make an own SLIM LP thread?
m.
meduza2 said:
...nice Do you intend to make an own SLIM LP thread?
m.
Click to expand...
Click to collapse
Great idea, but now I have no time to keep updated
diegocr said:
Great idea, but now I have no time to keep you updated
Click to expand...
Click to collapse
Would be really great!!
I would like to see SLIM LP on my tab s A platform to exchange user experience for our specific device would be very helpful for you and us
m.
meduza2 said:
Would be really great!!
I would like to see SLIM LP on my tab s A platform to exchange user experience for our specific device would be very helpful for you and us
m.
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-tab-s/development/rom-ezio84-slimlp-t3146025
Unofficial CM12.1 kernel for Galaxy S4 Mini (3G|LTE|DUOS)
Features:
Based on official CM12.1 kernel source
Hotplug thread infrastructure
Sweep2Sleep
Fast charge
Upgraded taus88 to taus113 algorithm for entropy generator
Frandom (fast random number generator)
Krait optimized strcmp and memcmp
Motorola MSM memcopy enhancements (memutils) to improve of the memory subsystem performance
Optimized ARM RWSEM (read/write semaphore) algorithm
CPU-boost
Quickwakeup
UKSM (Ultra Kernel SamePage Merging)
Timer slack controller
Speedup late resume patch for faster wakeup of the device
Updated F2FS
Updated exFAT
NTFS with full support read/write access
init.d support
zRAM
LZ4 compressor/decomressor for zRAM
TCP-cong: westwood, vegas, reno and etc.
Set SELinux always into "Permissive mode"
Faux123's Simple GPU governor
Faux123's IntelliThermal
Faux123's GPL Sound Control 3.5
Dynamic FSync
Dynamic dirty page writebacks
Dynamic LowMemoryKiller with management of not killable processes
Compiled with Linaro GCC 4.9.4-2015.06 Toolchain
CPU hotplugs:
Faux123's Intelliplug
MyFluxi's MSM-hotplug
Alucard-hotplug
Lazy-hotplug
Governors:
Alugard
[*]lteracative
[*]Dancedance
[*]Darkness
[*]Impulse
[*]Intelliminmax
[*]Intellidemand
[*]Intelliactive
[*]Lionheart
[*]Nigtmare
[*]Ondemandplus
[*]Optimax
[*]Preservative
[*]Slim
[*]Smartmax
[*]SmartAssV2
[*]SmartAssH3
[*]Uberdemand
[*]Wheatly
[*]Yankactiv
I/O Schedulers:
Noop
[*]Daedline
[*]ROW
[*]CFQ
[*]FIOPS (Fair Input/Output Per Second)
[*]SIO (Simple I/O)
[*]BFQ
[*]Tripendriod
Credits:
@arco68
@Christopher83
@F4k
@junkyde
@SilviuMik
@GrarakInstallation instructions:
1. Copy XXXX-ALX-x.x.x.zip to your sdcard
2. Reboot into CWM recovery
3. Choose "Install zip from sdcard"
4. Select XXXX-ALX-x.x.x.zip kernel and confirm installation.
XDA:DevDB Information
Custom CM12.1 Kernel for I9190/I9195/I9192, Kernel for the Samsung Galaxy S 4 Mini
Contributors
alexax66
Source Code: https://github.com/alexax66/CM12.1_kernel_serranodsxx
Kernel Special Features:
Version Information
Status: Testing
Current Stable Version: ALX-0.2.7
Stable Release Date: 2015-11-23
Created 2015-11-24
Last Updated 2015-11-24
Reserved
Reserved
Hi, all!
I start new thread for my CM12.1 kernel
alexax66 said:
Hi, all!
I start new thread for my CM12.1 kernel
Click to expand...
Click to collapse
Nice features and impressive number of governors :good:
Testing then report back.
Thank you very much ,our friend !!!!
woow...for to find the best governor/scheduler/hotplugg.... for best battery-life (with correct performance )
i cant compile on this pc
Has anyone compiled it for the I9195?
if so can i have a copy please as i cant get to my own pc until the weekend.
download link ? Also why is thread not is android development section ?
sasank360 said:
download link ? Also why is thread not is android development section ?
Click to expand...
Click to collapse
i think we have to compile it ourselves.
Having in mind the fact that 99% of us won't even dare to think about installing a kernel compiled by ourselves, is there a chance for someone more experimented to compile this kernel for all 3 versions?
I personally only need the lte version, but...
Thank you in advance.
Can not compile (newbie)
I would love to test this kernel and give feedback but I have no knowledge on how to compile. What's the chances on someone doing this with experience? I'm after the LTE version myself, I'm excited for a new kernel to play with. Or maybe someone can send meva walk through guide on his to compile.
Thanks in advance ☺
Has anyone tried it yet?
@alexax66
Please upload the kernel .zip or change Installation instruction
Installation instructions:
1. Copy XXXX-ALX-x.x.x.zip to your sdcard
2. Reboot into CWM recovery
3. Choose "Install zip from sdcard"
4. Select XXXX-ALX-x.x.x.zip kernel and confirm installation.
Click to expand...
Click to collapse
piskor said:
@alexax66
Please upload the kernel .zip or change Installation instruction
Click to expand...
Click to collapse
I had random reboot with this kernel after applied last patches
I will be find what is problem and will build new version
alexax66 said:
I had random reboot with this kernel after applied last patches
I will be find what is problem and will build new version
Click to expand...
Click to collapse
Any luck yet bud?
Can you uploud the .ZIP file ?
I wanna test the Gaming performance and compare the results with the lombartz kernel
improves battery?
Well i think thats the end of that.
Kernel is not stable, so we must wait. Patience, patience and one more time patience
piskor said:
Kernel is not stable, so we must wait. Patience, patience and one more time patience
Click to expand...
Click to collapse
Could you update the OP so we all know what we are waiting for, change (stable) to its current title etc etc, all I'm seeing is disinterest in this thread. Maybe release a pre-release version so someone else can help you, there is no point to compile this myself or I might as well start my own thread.
Looking forward to your clarification and thanks in advance.
Disclaimer
Code:
/*
* Your Warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead dogs, or cats,
* but i'm very interest in thermonuclear war, so if you point the finger
* at me for messing up your device just because this kernel, I will
* send you to the mars with Nuclear Rocket. Act accordingly.
* I know this paragraph is conspiracy-included, so
* dont ask about it. Welcome.
*/
Huawei Y550 Kernel!Soviet Star -Marshmallow KernelSoviet Bastard -Lollipop Kernel
Features:
CPU OC to 1.6ghz
Compiled with Hyper mod (SaberMod & Uber hybrid) tollchain
GCC 5.4 and GCC 6.0 builds for user preference
O3 optimization
MSM sleeper, MSM, Mako & Zen hotplugs
FIOPS, ZEN, VR,Trindroid I/O schedulers
DriveDroid Support
Darkness, Yankactive, Zzmove, ElemtalX , Bioshock CPU Governators
USB fast charge
KSM optimization
Zram optimization
Adreno Idler optimization
General Performance & Battery life optimizations
-gpu oc to 465
Installation:
Download the zip file
Reboot to your recovery (I'm suggested yo to INSTALL TWRP 3.0.2)
BACKUP your BOOT partition (to make it safe so your can easely restore if found any critical problem)
Install the img file
Reboot to system
Preferred Kernel Tweaker App:
Kernel Adiutor
OPTIMAL SETTINGS::
Optimal settings for balanced performance and battery life:
CPU frequency:- 200MHz to 1.2GHz
GPU frequency:- 100MHz to 310MHz
CPU governor:- zzmove ore anyone you wish
I/O scheduler -FIOPS
Zen hotplug
KSM enabled
Optimal settings for performance during gaming:-
CPU frequency:- 400MHz to 1.4GHz
GPU frequency:- 100MHz to 465MH
z
Download
https://github.com/kondors1995/android_kernel_huawei_msm8916/releases
Credits:
- y550 dev team:
- @desalesouche for the sources
- @Hacker432 for help
- @hecaex for help
- @dabi01 for testing-all the other testers
XDA:DevDB Information
Soviet Star , Kernel for all devices (see above for details)
Contributors
NATO66613, dabi01, desalesouche
Source Code: https://github.com/kondors1995/android_kernel_huawei_msm8916/commits/mm
Kernel Special Features:
Version Information
Status: Stable
Created 2016-07-15
Last Updated 2016-07-21
Reserved
V2. change log
Compiled with Hyper mod (SaberMod & Uber hybrid) tollchain
GCC 5.4 and GCC 6.0 builds for user preference
Added
-O3 optimization
MSM sleeper, MSM, Mako & Zen hotplugs
FIOPS, ZEN, VR,Trindroid I/O schedulers
DriveDroid Support
Darkness, ElemtalX , Bioshock CPU Governators
USB fast charge
KSM optimization
Zram optimization
Adreno Idler optimization
General Performance & Battery life optimizations
All Nightly builds are published on my github.
https://github.com/kondors1995/android_kernel_huawei_msm8916/releases
How does this work on multiple devices?
gillim74 said:
How does this work on multiple devices?
Click to expand...
Click to collapse
Based on the Github description I'd say it's only for the Huawei 4x, or he's just trying to brick everyone's device.
AutumQueen92 said:
Based on the Github description I'd say it's only for the Huawei 4x, or he's just trying to brick everyone's device.
Click to expand...
Click to collapse
Its based on Hiawei horror 4 kernel
Delsauce added suport for g620s,y635, and y550
Right nwo its tested on y550 only
NATO66613 said:
Its based on Hiawei horror 4 kernel
Delsauce added suport for g620s,y635, and y550
Right nwo its tested on y550 only
Click to expand...
Click to collapse
Better edit your title and post so people know what is is for.
AutumQueen92 said:
Better edit your title and post so people know what is is for.
Click to expand...
Click to collapse
I agree need to say what it's for and not for all devices
gillim74 said:
I agree need to say what it's for and not for all devices
Click to expand...
Click to collapse
His idea of a device is saying it's for Marshmallow only. Sad.
AutumQueen92 said:
His idea of a device is saying it's for Marshmallow only. Sad.
Click to expand...
Click to collapse
Agreed
AutumQueen92 said:
His idea of a device is saying it's for Marshmallow only. Sad.
Click to expand...
Click to collapse
gillim74 said:
Agreed
Click to expand...
Click to collapse
Actually his kernel supports:
-C8817D
-C8817E
-G620S
-G760
-Y550----> Tested
-Y635
I suggest to use the kernel with MM but if you want to flash it with Lollipop you're free to do it.
Just one notice...If you brick the device don't come cry here, tell it to you're parents
Thanks for the attentio, best regards
hi
what is Difference of
soviet_star_R2_SMxU5.img
soviet_star_R2_SMxU6.img
?
rtmreza said:
hi
what is Difference of
soviet_star_R2_SMxU5.img
soviet_star_R2_SMxU6.img
?
Click to expand...
Click to collapse
soviet_star_R2_SMxU5.img is compiled with hybrid tollchain GCC 5.4 and soviet_star_R2_SMxU6.img is hybrid tollchain GCC 6.0
Mainly its GCC version.
NATO66613 said:
soviet_star_R2_SMxU5.img is compiled with hybrid tollchain GCC 5.4 and soviet_star_R2_SMxU6.img is hybrid tollchain GCC 6.0
Mainly its GCC version.
Click to expand...
Click to collapse
Top job mate. Just need cm13 to be stable so I can test it out
In Features: you said USB fast charge
Your mean of fast is it work by charger of 2.1 Ah
or
no it works with 1 amper just some minutes faster
installation not possible
Hi kondors1995,
I followed the installation instructions but it seems that something is not quite ok. I donwloaded both the img (Stalin.img) and zip file (android_kernel_huawei_msm8916-2.5.zip) from your github repo.
I placed them on an SDCARD and then booted into TRWP recovery v3.0.2.
I installed the img file and selected reboot into system.
apart from a neverending boot loop there is nothing.
Any advice?
My device is Huawei Ascend Y550-L02.
Thank you
yaroyaro said:
Hi kondors1995,
I followed the installation instructions but it seems that something is not quite ok. I donwloaded both the img (Stalin.img) and zip file (android_kernel_huawei_msm8916-2.5.zip) from your github repo.
I placed them on an SDCARD and then booted into TRWP recovery v3.0.2.
I installed the img file and selected reboot into system.
apart from a neverending boot loop there is nothing.
Any advice?
My device is Huawei Ascend Y550-L02.
Thank you
Click to expand...
Click to collapse
Hi, have you installed CM13 rom first? This is only kernel.
stmr said:
Hi, have you installed CM13 rom first? This is only kernel.
Click to expand...
Click to collapse
:-O but there is no stable CM13 for Y550
do you mean the experimental CM13 by des (cm-13.0-20160704-rotation-des-y635-y550)?
thank you
yaroyaro said:
:-O but there is no stable CM13 for Y550
do you mean the experimental CM13 by des (cm-13.0-20160704-rotation-des-y635-y550)?
thank you
Click to expand...
Click to collapse
Sorry for the late reply, yes, I mean that one. If you flash modem and apply Hacker432's wifi fix, the only thing that's buggy is rotation.
@NATO66613
can I install them via fastboot ?!
*
where is Soviet Star 2.5 Kernel file ?!
there is just 3 file in your github :
Stalin.img
Source code (zip)
Source code (tar.gz)
Saint_13 said:
@NATO66613
can I install them via fastboot ?!
*
where is Soviet Star 2.5 Kernel file ?!
there is just 3 file in your github :
Stalin.img
Source code (zip)
Source code (tar.gz)
Click to expand...
Click to collapse
yes you caan yust push img file
*** This kernel is now end-of-life, not supported and developed anymore !!! ***
Hi all,
some of you know me from the other OnePlus or Samsung devices areas, where I provide my kernels already for more than three years to OnePlus One, OnePlus Two, OnePlus X, Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, Cyanogenmod, Omnirom etc.)
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other, good existing kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Compatibility
Important: This kernel is only meant to be compatible with official OnePlus OOS and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
To add: An open beta (aka community build) is NOT an official build supported here. If you use a community build and have issues, don't complain or even report. I am not merging any kernel changes from open betas into my kernels !!
Important notes
When using new anykernel concept Boeffla-Kernel: Flash stock kernel of rom first !
This kernel is ONLY compatible to OxygenOs stock, nothing else !!!
If you are using a custom rom that bases on OxygenOs, it might work. However, if it does not work, do not expect me to do tweak to make the kernel running with your favorite rom. I would not do it - my one and only reference is OxygenOs stock.
It is not supposed to be compatible to CM, HydrogenOS etc.
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Installation
Read the install instructions in the support section on the Boeffla Site.
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app (outdated at the moment).
Click here to learn about using the config app (outdated at the moment).
I will refuse to give support if you do any undervolting/overclocking and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Change log for OxygenOS 4.x.x kernel - Click here
Change log for OxygenOS 3.x.x kernel - Click here
Features
Note: This kernel only runs on OOS 3.x.x for the OnePlus 3 - nothing else !!!
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.4.02 or higher !!!) configuration app (get it from http://www.boeffla.de) to configure all kernel settings
Dash charging fully supported
The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
Additional governors: Impulse, zzmoove, elementalx, conservative, ondemand, blu_active
Additional schedulers: fiops, bfq, sio, sioplus, fifo, vr, tripndroid, zen, maple
CPU overclocking - one additional overclocking step for both clusters (1,72 GHz for little CPU / 2,26 GHz for big CPU)
No GPU overclocking, no CPU and GPU voltage interface
USB charge rate bumped up to 900 mA
Boeffla charge analysis (display of charger type and charge current in Boeffla-Config app in real time)
Boeffla touchkey LED control (LEDs fully off, LED on screen touch, configurable duration)
CPU core profiles to restrict number of CPU cores being used (the OP3 does not hotplug based on load)
Notification LED control (effect + speed for blinking/fading, brightness for continuous notification like battery charging etc.)
Boeffla-Sound engine: Headphone volume and speaker volume (only lowering volumes for speaker)
Dynamic FSync (activated if screen on, deactived if screen off), configurable
Input boost frequencies and duration configurable per CPU cluster, input boost switch
Show CPU frequency usage per CPU and frequency in Boeffla-Config
Show GPU frequency usage per frequency in Boeffla-Config
KCal V2 Color control
Display backlight limits configurable (to avoid display brightness gets too low in some situations)
Display backlight dimmer
Swipe2wake gestures
Control haptic feedback of gestures (except fingerprint)
Haptic feedback intensity control
Swipe2sleep gestures
Boeffla generic wakelock blocker V1.1.0 (documentation)
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
Kernel logger (dmesg) configurable
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Many additional TCP congestion algorithms available
Entropy values configurable
Hardware touch keys are locked as long as screen is in use (touched) for better usability
Swap supported
Various minor kernel tweaks
Doze mode configurable in Boeffla-Config
Full selinux strict support (switchable to permissive on demand)
Show speedbin information (PVS level) in Boeffla-Config app
init.d support (in /system/etc/init.d - set correct permissions!)
Automatic EFS backup
Integrated full busybox 1.27.2 (own compilation)
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Google gcc 4.9 toolchain (64 bit) used for best stability
Always based on latest OOS kernel sources (https://github.com/OnePlusOSS/android_kernel_oneplus_msm8996)
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
things I do personally not need
things I do not like
things that are in any way dangerous
anything which is highly experimental
f2fs - it is known to cause various issues and compatibility problems
a CAF based kernel
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the kernel only if you are running a compatible rom !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from the downloads section on www.boeffla.de.
You need at least version 2.4.02 or higher for the OnePlus 3 Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* Grarak
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
* FranciscoFranco
* Ak
* Osm0sis
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi
Latest change log:
OOS4
http://kernel.boeffla.de/oneplus3/boeffla-kernel-oos/oos4xx/changelog.htm
OOS3
http://kernel.boeffla.de/oneplus3/boeffla-kernel-oos/oos3xx/changelog.htm
Configuration and profile thread
http://forum.xda-developers.com/oneplus-3/how-to/profiles-boeffla-kernel-profiles-t3455503
*** You want my support? Then stick to my rules ***
Guys, I am receiving more and more completely useless support requests in different threads. Useless because people provide nothing to be able to help, not even the minimal possible information they could give.
Hence, I will now remind anyone again on the support guide lines stated here:
http://boeffla.de/index.php/support/support
Also you need to ensure you follow the installation guide lines incl. trouble-shooting stated here:
http://boeffla.de/index.php/support/installation-how-to
And to cut a long story short: If you do not at least provide what I request in the support guide lines, I will IGNORE YOUR REQUESTS IN FUTURE.
Straight and simple. I have enough of people wasting my time just because they are too lazy to write details.
Period.
Also as a reminder:
you use xposed? -> no support, everything is your own issue
you use a custom rom and not the official stock or CM one? -> good luck, you are on your own
you undervolt or overclock? -> have fun, but without my support
Sorry, this might sound harsh (and it is meant to sound harsh), but you cannot imagine about how crappy support requests can be. Stating something does not work is just not enough.
Please consider that!!!
Andi
Allright folks, thread is open. Kernel is available for download.
Before you start, please make sure you read the following information at least:
http://boeffla.de/index.php/support/installation-how-to
http://boeffla.de/index.php/support/support
If you have trouble, I ask you to also scan for your issue in the OnePlus 2 thread, as major parts are the same on both devices (http://forum.xda-developers.com/oneplus-2/orig-development/kernel-boeffla-kernel-05-10-2015-t3218164)
Enjoy
Andi
It's going to be legen. Wait for it. Dary
Thanks Dev for supporting OP3
Downloading rn
Awesome ... Thanks for this ....
Great work..
To restore old kernel stock..is it possible to have it too??
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
isoladisegnata said:
Great work..
To restore old kernel stock..is it possible to have it too??
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Click to expand...
Click to collapse
Let me create a stock kernel section for it on www.boeffla.de, then yes. But this can take till tomorrow, I am out very soon today.
Apart from that, you can always flash OOS dirty over, this brings you stock kernel back.
Andi
Lord Boeffla said:
Let me create a stock kernel section for it quickly on www.boeffla.de, then yes.
Apart from that, you can always flash OOS dirty over, this brings you stock kernel back.
Andi
Click to expand...
Click to collapse
Yes..
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
isoladisegnata said:
Yes..
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Click to expand...
Click to collapse
Just corrected my statement, will not be before tomorrow as I have to leave very early today for an appointment.
Andi
hail to the lord of kernels
isoladisegnata said:
Great work..
To restore old kernel stock..is it possible to have it too??
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Click to expand...
Click to collapse
With Flashify you can backup and restore the stock kernel.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Der-Knuffi said:
With Flashify you can backup and restore the stock kernel.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Click to expand...
Click to collapse
Yeees, but... not 100%.
IMHO it backups the kernel image, but not the kernel modules too.
And OnePlus is using kernel modules on OOS.
Just to be very precise.
Andi
its not yet available to download?
tatuboy said:
its not yet available to download?
Click to expand...
Click to collapse
What?
And why should it be not?
Be more specific pls.
Andi
Download of OOS kernel working here.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
It finally happened
OMG.
Now I have no excuses anymore to not buy a Oneplus 3.
So it was a short interruption without Boeffla on LG G4 (5 months)
Many, many thanks for this.
Hail to Lord Boeffla. I can not live without your kernels
Greetings and keep calm.
Some got the app working on 3.5.1?
C.H.T.J. said:
Some got the app working on 3.5.1?
Click to expand...
Click to collapse
Same here, not working boeffla config in OSS 3.5.1... The kernel is very good, smooth, but the apk isn't working yet...
Good job bro, your kernel is awesome..
Sent from my ONEPLUS A3003 using Tapatalk
What is your webpages
Code:
http://kernel.boeffla.de/oneplus3/boeffla-kernel-oos/oos3xx_download/Stable
wrong with the ESET antivirus selectively alert immediately and does not reach the website.
Indicates that the page is harmful.
Bit KernelUpstreamed kernel (ALS), current caf tag: LA.UM.8.11.r1-02400-NICOBAR.0
Features:
- TTL Fixation support
- KCAL
- Wireguard
- BBR tcp congestion algorithm by default
- Less debug
- More technical changes under the hood, you can check them on kernel GitHub repo: link
Download: Q Bit kernel | FK manager kernel install config
Pie (Deprecated)
XDA:DevDB Information
BitKernel, Kernel for the Xiaomi Mi A3
Contributors
Harukey
Source Code: https://github.com/HarukeyUA/android_kernel_xiaomi_laurel_sprout
Kernel Special Features:
Version Information
Status: Stable
Created 2019-11-14
Last Updated 2020-01-31
Wow one more kernel
Reserved
Hello,
Thank you for this amazing kernel. I'm a fan of no unnecessary control in a kernel and this kernel is amazing for a minimalist like me. But here's one suggestion from my side. How about added support for KCAL ? My only complain from this device is poor calibration and addition of KCAL will be like a dream come true.
Thanks a lot.
Great release
RizwanH20 said:
Hello,
Thank you for this amazing kernel. I'm a fan of no unnecessary control in a kernel and this kernel is amazing for a minimalist like me. But here's one suggestion from my side. How about added support for KCAL ? My only complain from this device is poor calibration and addition of KCAL will be like a dream come true.
Click to expand...
Click to collapse
Yes this is a good idea. Colo calibration is really bad in these phones.
How to flash this kernel? Do I need to flash is on stot A or slot B
anroidfan said:
How to flash this kernel? Do I need to flash is on stot A or slot B
Click to expand...
Click to collapse
According to 4pda : Flash zip in twrp, flash magisk if you have it installed
(I haven't tested it yet)
whats this kernel's feature? optimized? battery optimized? any tcp congestion added? please mention features in thread
Flashed this kernel over Pixel Experience rom november build, looks like everything is working fine. I first went into to fastboot to select slot A then I rebooted into Twrp 3.3..1-2 and flashed Kernel, Magisk 20.1 and patch_no_fde10. Then wiped cache and rebooted.
This kernel solved the low audio volume problem?
MathePro said:
This kernel solved the low audio volume problem?
Click to expand...
Click to collapse
If you are asking about the low volume output through the headphones on the stock rom, then yes.
Nice kernel , thanks for your work
RizwanH20 said:
Hello,
Thank you for this amazing kernel. I'm a fan of no unnecessary control in a kernel and this kernel is amazing for a minimalist like me. But here's one suggestion from my side. How about added support for KCAL ? My only complain from this device is poor calibration and addition of KCAL will be like a dream come true.
Click to expand...
Click to collapse
I added kcal to kernel source, update with it will come soon
Can i install this kernel to stock rom?
roket14281 said:
Can i install this kernel to stock rom?
Click to expand...
Click to collapse
Yes, you can
Features?
Kernel update released!
Changelog:
P:
- Added kcal, ttl fixation support
- Merged LA.UM.7.11.r1-04400-NICOBAR.0 caf tag
Q:
- Added kcal, ttl fixation support
KCAL control tested in FK kernel manager app. For changes to take effect you need to lock and unlock your phone.
Download: P | Q
Thank you for the kernel!
Probably difficult but could you please consider incorporate this into the kernel as well? https://forum.xda-developers.com/galaxy-s8+/development/amoled-pwm-s8-t3716663
Great kernel!