Here is how i boot looped my phone, I rooted it by following this thread https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039 and I rooted it successfully. The I needed to unroot my phone and tried following the unroot method on that thread. But I got an error with odin saying "FAIL! (AUTH)" and thought it was the version I was using. So i tried downloading a few different versions and tried the latest update for the s7 and it failed which boot looped my phone. And if i hold power + Volume Up + Home it says recovery booting.... and keeps doing that over and over. so that doesnt work. All i want to do at this point is get my phone unboot looped and unrooted If anybody can help. please do. BTW i have the SM-G930V
c0ff33 said:
Here is how i boot looped my phone, I rooted it by following this thread https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039 and I rooted it successfully. The I needed to unroot my phone and tried following the unroot method on that thread. But I got an error with odin saying "FAIL! (AUTH)" and thought it was the version I was using. So i tried downloading a few different versions and tried the latest update for the s7 and it failed which boot looped my phone. And if i hold power + Volume Up + Home it says recovery booting.... and keeps doing that over and over. so that doesnt work. All i want to do at this point is get my phone unboot looped and unrooted If anybody can help. please do. BTW i have the SM-G930V
Click to expand...
Click to collapse
Try loading all 4 files in odin 3.12 as starting fresh. Qa4 should be available. Or look at some of the posts in the bs free thread and see if any of this workarounds work
gunz.jones said:
Try loading all 4 files in odin 3.12 as starting fresh. Qa4 should be available. Or look at some of the posts in the bs free thread and see if any of this workarounds work
Click to expand...
Click to collapse
All 4 files of the latest update? or the older version?
c0ff33 said:
All 4 files of the latest update? or the older version?
Click to expand...
Click to collapse
BL, AP, CSC, CP
https://forum.xda-developers.com/verizon-galaxy-s7/development/rom-t3576124/page16
gunz.jones said:
BL, AP, CSC, CP
https://forum.xda-developers.com/verizon-galaxy-s7/development/rom-t3576124/page16
Click to expand...
Click to collapse
this happens when i try loading the files i have which is the latests update https://gyazo.com/754847c67703f53c5e53c285882bcf63
That's odd. Try using the files and instructions from the thread i linked to. See if you have the same result.
gunz.jones said:
That's odd. Try using the files and instructions from the thread i linked to. See if you have the same result.
Click to expand...
Click to collapse
should i use tmobile files bc thats all i see on that thread? or what else do i use
c0ff33 said:
should i use tmobile files bc thats all i see on that thread? or what else do i use
Click to expand...
Click to collapse
Yes, they should still work without that error you're getting now
gunz.jones said:
Yes, they should still work without that error you're getting now
Click to expand...
Click to collapse
I installed the tmobile and it worked but when i got to the flash ap file using that app it said it doesnt have root powers. and that my phone is tmobile is a problem bc i need to turn it in to get an s8
c0ff33 said:
I installed the tmobile and it worked but when i got to the flash ap file using that app it said it doesnt have root powers. and that my phone is tmobile is a problem bc i need to turn it in to get an s8
Click to expand...
Click to collapse
Try getting the qa2 files off updato.com and flashing those. May be a bad dl that is causing your problem. If it flashed the tmo files with no issue, then that's the only thing i can think of
gunz.jones said:
Try getting the qa2 files off updato.com and flashing those. May be a bad dl that is causing your problem. If it flashed the tmo files with no issue, then that's the only thing i can think of
Click to expand...
Click to collapse
would this be it? http://updato.com/firmware-archive-select-model?record=4143C97E042B11E7963AFA163EE8F90B
c0ff33 said:
would this be it? http://updato.com/firmware-archive-select-model?record=4143C97E042B11E7963AFA163EE8F90B
Click to expand...
Click to collapse
And with that file do i flash the AP , CP , BL , And HOME_CSC ?
c0ff33 said:
And with that file do i flash the AP , CP , BL , And HOME_CSC ?
Click to expand...
Click to collapse
Yes, flash all those listed. It should fix your issue if all files are correct. If you have an issue with home csc, try the base csc and factory reset
gunz.jones said:
Yes, flash all those listed. It should fix your issue if all files are correct. If you have an issue with home csc, try the base csc and factory reset
Click to expand...
Click to collapse
FIXED thanks so much your awesome
c0ff33 said:
FIXED thanks so much your awesome
Click to expand...
Click to collapse
You're welcome
Related
Please help!!! I tried rooting my device using this link
http://forum.xda-developers.com/sho...utmctr=(not provided)&__utmv=-&__utmk=1390275
and after clicking start in odin, the progress bar stopped moving halfway through. I didn't know what to do so i shut down my phone and when i started it back up, i got the message: Firmware upgrade encountered an issue. Please select recovery mode in kies and try again.
Now im stuck on this screen but i can still go into downloading mode.
I am using t-mobile and my phone model is SM-900. I think the problem was because i used the wrong file in odin. Rather than using:SM-N900 (International Exynos) i used SM-N900T (T-Mobile US). Anyway to fix this or am i screwed?Please help.
demon09 said:
Please help!!! I tried rooting my device using this link
http://forum.xda-developers.com/sho...utmctr=(not provided)&__utmv=-&__utmk=1390275
and after clicking start in odin, the progress bar stopped moving halfway through. I didn't know what to do so i shut down my phone and when i started it back up, i got the message: Firmware upgrade encountered an issue. Please select recovery mode in kies and try again.
Now im stuck on this screen but i can still go into downloading mode.
I am using t-mobile and my phone model is SM-900. I think the problem was because i used the wrong file in odin. Rather than using:SM-N900 (International Exynos) i used SM-N900T (T-Mobile US). Anyway to fix this or am i screwed?Please help.
Click to expand...
Click to collapse
so go to download mode and flash correct file.
ur phone soft-bricked.
:good:
And how do i do that?Sorry if its a dumb question. I have no experience in this.
demon09 said:
And how do i do that?Sorry if its a dumb question. I have no experience in this.
Click to expand...
Click to collapse
Flash it from download mode
Rosli59564 said:
Flash it from download mode
Click to expand...
Click to collapse
What is flashing?
demon09 said:
What is flashing?
Click to expand...
Click to collapse
I mean try to root back your phone using the correct file per the thread you provided earlier. Launch odin, get into download mode. link the file into pda in odin then start
Rosli59564 said:
I mean try to root back your phone using the correct file per the thread you provided earlier. Launch odin, get into download mode. link the file into pda in odin then start
Click to expand...
Click to collapse
Oh i was thinking about trying that but i was afraid i might permanently brick my phone. I will try that
OMG TY IT WORKED.TYVM. Now that i'm rooted, will i have to remove root everytime i want to update my phone?If so, will i have to delete everything on my phone to remove root??
demon09 said:
OMG TY IT WORKED.TYVM. Now that i'm rooted, will i have to remove root everytime i want to update my phone?If so, will i have to delete everything on my phone to remove root??
Click to expand...
Click to collapse
No need if update through odin. Else need to unroot to get OTA
Here i have the odin files to restore your tablet to stock if you brick make sure re-partition is unchecked
do not attempt to use this files to another version is for the AT&T model only.
DOES NOT TRIP KNOX
AP_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar.md5
BL_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_P907AATT1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar.md5
reserverd
torreon901 said:
Here i have the odin files to restore your tablet to stock if you brick make sure re-partition is unchecked
do not attempt to use this files to another version is for the AT&T model only.
DOES NOT TRIP KNOX
AP_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar.md5
BL_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_P907AATT1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar.md5
Click to expand...
Click to collapse
You are ****ing awesome
torreon901 said:
Here i have the odin files to restore your tablet to stock if you brick make sure re-partition is unchecked
do not attempt to use this files to another version is for the AT&T model only.
DOES NOT TRIP KNOX
AP_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar.md5
BL_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_P907AATT1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar.md5
Click to expand...
Click to collapse
So using heimdall, compiled from latest and libusb, libpit both latest, I cannot get this piece of **** to download the PIT file, it just fails with protocol initialization error. Have any ideas?
cgardner2020 said:
So using heimdall, compiled from latest and libusb, libpit both latest, I cannot get this piece of **** to download the PIT file, it just fails with protocol initialization error. Have any ideas?
Click to expand...
Click to collapse
dont know my man.. i only used Odin 3 3.09 and worked great
torreon901 said:
dont know my man.. i only used Odin 3 3.09 and worked great
Click to expand...
Click to collapse
I booted to recovery then formatted all the partitions and then the Samsung tool worked.
cgardner2020 said:
I booted to recovery then formatted all the partitions and then the Samsung tool worked.
Click to expand...
Click to collapse
cool great for you!!!!
torreon901 said:
cool great for you!!!!
Click to expand...
Click to collapse
Thanks needed these can't stand the reboots after towelroot.
evolutioncsr said:
Thanks needed these can't stand the reboots after towelroot.
Click to expand...
Click to collapse
I have towelrooted but NOT disabled Knox on mine and have not had reboots since...
Thank you!
torreon901 said:
I have towelrooted but NOT disabled Knox on mine and have not had reboots since...
Click to expand...
Click to collapse
Did you have any issues after root. I see some people are saying they have a reboot problem, but you didn't and you didn't disable knox. Just wanted to see what issues there might be after rooting.
Thanks in advance.
Awesome! It's great to have these.
chrispyutec said:
Did you have any issues after root. I see some people are saying they have a reboot problem, but you didn't and you didn't disable knox. Just wanted to see what issues there might be after rooting.
Thanks in advance.
Click to expand...
Click to collapse
well i have rooted my tablet like 100 times before i was able to root without annoying reboots. And what i did is to leave Knox alone.. i mean not to disable knox when supersu asks me to. I have been using my tablet for weeks now and have not had a reboot since.
torreon901 said:
Here i have the odin files to restore your tablet to stock if you brick make sure re-partition is unchecked
do not attempt to use this files to another version is for the AT&T model only.
DOES NOT TRIP KNOX
AP_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar.md5
BL_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_P907AATT1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar.md5
Click to expand...
Click to collapse
OK I'm lost.. Y are there 4 files... In the past I only needed one to restore my phones
wojo797 said:
OK I'm lost.. Y are there 4 files... In the past I only needed one to restore my phones
Click to expand...
Click to collapse
Those files are the extraction of the kies .zip download. They are flashable trough ODIN 3.09. New devices like note 3 firmware are also donloaded like that,,,,
here is a sample of how you should use those files...
QUESTIONS.
Hi.
So all those 4 files listed are used at once?...
How do you get them into Odin3?.. Do you link from this page or do you need to download them AND how do you do that?
Would it fix the blue screen of death?
I have tried the AT&T OTA lollipop that just came out and the pad won't update?..
Is it an AT&T update or is it a Samsung update..
Do I need the AT&T sim card installed for it to update as I'm using a different carrier for the LTE?
Updated back to stock ROM and still no OTA update.
Richard.
Locate the lollipop update try downloading it to your sd card and reboot in recovery. Tell it to update from the file on the sd card. This way works! I know because I have done it . The AT&T update doesn't work, now matter how many times I try it. I remember getting the file from Samsung updates. I hope this helps, couldn't find my source when I went looking . Best of luck to you...May your update go smoothly. :laugh:
george64g said:
Locate the lollipop update try downloading it to your sd card and reboot in recovery. Tell it to update from the file on the sd card. This way works! I know because I have done it . The AT&T update doesn't work, now matter how many times I try it. I remember getting the file from Samsung updates. I hope this helps, couldn't find my source when I went looking . Best of luck to you...May your update go smoothly. :laugh:
Click to expand...
Click to collapse
Thanks..
So just put that complete file on an mini SD card and it will find all the files it needs and update itself?
Does the new lollipop update remove the infamous AT&T blue screen of death problem?
Richard.
torreon901 said:
Here i have the odin files to restore your tablet to stock if you brick make sure re-partition is unchecked
do not attempt to use this files to another version is for the AT&T model only.
DOES NOT TRIP KNOX
AP_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar.md5
BL_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_P907AATT1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar.md5
Click to expand...
Click to collapse
Can I downgrade from 5.1.1 to this please?
Okay, this is the 4.4.2...
First sorry if this has been asked the forum is rather large and sifting thru all the posts is a bit tedious. Is there a root out for the t537v module of the galaxy tab 4?
Thanks in advance
uroboch said:
First sorry if this has been asked the forum is rather large and sifting thru all the posts is a bit tedious.
Click to expand...
Click to collapse
Did you try towelroot?
Also don't keep saying what I quoted you on. Someone less nice than me is going to jump down your throat for it lol
thisisapoorusernamechoice said:
Did you try towelroot?
Also don't keep saying what I quoted you on. Someone less nice than me is going to jump down your throat for it lol
Click to expand...
Click to collapse
Thanks for the advice and yes i tried towel root it tells me "This Phone isn't Supported"
uroboch said:
First sorry if this has been asked the forum is rather large and sifting thru all the posts is a bit tedious. Is there a root out for the t537v module of the galaxy tab 4?
Thanks in advance
Click to expand...
Click to collapse
Hi ,
I think you have latest build now (4.4.4) , yes ? If yes , you must to try to flash via Odin older firmware http://www.sammobile.com/firmwares/download/34971/T537VVRU1ANE2_T537VVZW1ANE2_VZW/ from any source . Before flashing you must to do factory reset . Then to try Towelroot . Perhaps you must to try like here http://forum.xda-developers.com/showpost.php?p=58501194&postcount=245 . Then freeze or delete update service . If all will be fail , flash your last firmware again (for return back) .
Remember , you lost data when do factory reset .
You not afraid nothing .
repey6 said:
Hi ,
I think you have latest build now (4.4.4) , yes ? If yes , you must to try to flash via Odin older firmware http://www.sammobile.com/firmwares/download/34971/T537VVRU1ANE2_T537VVZW1ANE2_VZW/ from any source . Before flashing you must to do factory reset . Then to try Towelroot . Perhaps you must to try like here http://forum.xda-developers.com/showpost.php?p=58501194&postcount=245 . Then freeze or delete update service . If all will be fail , flash your last firmware again (for return back) .
Remember , you lost data when do factory reset .
You not afraid nothing .
Click to expand...
Click to collapse
Trying this now i will let you all know how it goes.
uroboch said:
Trying this now i will let you all know how it goes.
Click to expand...
Click to collapse
Sadly i couldn't get the old firmware to flash onto the device. if anyone has done this and had luck please let me know where you got the firmware and what you did to get it to work.
Thanks in advance.
uroboch said:
Sadly i couldn't get the old firmware to flash onto the device. if anyone has done this and had luck please let me know where you got the firmware and what you did to get it to work.
Thanks in advance.
Click to expand...
Click to collapse
Please wait little . I can to give you this firmware in the night .
Ready
UPD.Strangely, some problems with the archive. try to understand
Try this . May be you can to flash this tar-archive . If no , i will search new right archive .
See last post
I will try to fix it in afternoon
downloading the tar archive now i will let you know if i have success.
Thanks
uroboch said:
downloading the tar archive now i will let you know if i have success.
Thanks
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=95916177934538217
All is OK !
Archive is good . My tab shows that archive is bad . And my PC shows that archive is normal .
repey6 said:
https://www.androidfilehost.com/?fid=95916177934538217
All is OK !
Archive is good . My tab shows that archive is bad . And my PC shows that archive is normal .
Click to expand...
Click to collapse
the message I'm getting is SW REV CHECK FAIL : [aboot]Fused 2 > binary 1
uroboch said:
the message I'm getting is SW REV CHECK FAIL : [aboot]Fused 2 > binary 1
Click to expand...
Click to collapse
you flash archive from https://www.androidfilehost.com/?fid=95916177934538217 ?
That's the archive I'm using. I don't think I'm using Odin right.
uroboch said:
That's the archive I'm using. I don't think I'm using Odin right.
Click to expand...
Click to collapse
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin ZIP file
Open Odin v.3.09
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
uroboch said:
That's the archive I'm using. I don't think I'm using Odin right.
Click to expand...
Click to collapse
these are the directions I'm using to flash the device
http://primehowto.com/update-galaxy-tab-4-10-1-lte-verizon-sm-t537v-android-4-4-4-kitkat-t537vvru2ank1-official-firmware/
"How To Install T537VVRU2ANK1 Android 4.4.4 KitKat On Galaxy Tab 4 10.1 LTE (Verizon) SM-T537V Manually"
using the tar you gave me
Still getting above mentioned error on my device after i start the flash and it fails. Alas it appears i shall have to wait until someone figures out how to root the newest firmware.
uroboch said:
these are the directions I'm using to flash the device
http://primehowto.com/update-galaxy-tab-4-10-1-lte-verizon-sm-t537v-android-4-4-4-kitkat-t537vvru2ank1-official-firmware/
"How To Install T537VVRU2ANK1 Android 4.4.4 KitKat On Galaxy Tab 4 10.1 LTE (Verizon) SM-T537V Manually"
using the tar you gave me
Still getting above mentioned error on my device after i start the flash and it fails. Alas it appears i shall have to wait until someone figures out how to root the newest firmware.
Click to expand...
Click to collapse
So , good guide . Follow him . Unfortunately install this firmware does not work.
You dont try flash only older kernel like PDA via Odin ?
I also tried to flash using odin 3.07 and the PDA option but it fails.
Thanks again for all the help
uroboch said:
I also tried to flash using odin 3.07 and the PDA option but it fails.
Thanks again for all the help
Click to expand...
Click to collapse
Wait little i ask guru
repey6 said:
You dont try flash only older kernel like PDA via Odin ?
Click to expand...
Click to collapse
And why exactly shouldn't they try that? That's exactly what they're doing here I even contacted the moderator to verify that. Plus I used that method to re-root after I had to Odin back to complete factory stock. I don't see what the problem is flashing just an older kernel, rooting using towelroot, and then flashing the most current kernel. That's exactly how my tablet is rooted and was on the most current firmware (OA2) before I flashed Cyanogenmod
I tried downgrading after looking everywhere for a possible problem with odin.. I was on the latest cpg2 and odined the bp1 firmware for 5.1 and it stuck on rpm or something like that forgive me but i cant recall..I pulled it after 20 min and then got a software update error..and no matter what firmware i tried to put on its stuck on get pit for mapping.. My computer sees it as a device MSM8960.. So kies ng. Odin works but cant pass pit Please anyone i know with latest update I should not of done this..I even tried latest firmware it was on but same error
davekaz said:
I tried downgrading after looking everywhere for a possible problem with odin.. I was on the latest cpg2 and odined the bp1 firmware for 5.1 and it stuck on rpm or something like that forgive me but i cant recall..I pulled it after 20 min and then got a software update error..and no matter what firmware i tried to put on its stuck on get pit for mapping.. My computer sees it as a device MSM8960.. So kies ng. Odin works but cant pass pit Please anyone i know with latest update I should not of done this..I even tried latest firmware it was on but same error
Click to expand...
Click to collapse
Restart pc and try latest firmware again
Trex888 said:
Restart pc and try latest firmware again[/QU
THANKS FOR REPLY ive tried every imaginable firmware for it including newest it was on and still get pit error
Click to expand...
Click to collapse
davekaz said:
Trex888 said:
Restart pc and try latest firmware again[/QU
THANKS FOR REPLY ive tried every imaginable firmware for it including newest it was on and still get pit error
Click to expand...
Click to collapse
Downliad repair firmware from link below
This will comes with pit file
Flash repair firmware with pit file and hopefully this will solve the issue.
Make sure download correct firmware for your model.
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
Click to expand...
Click to collapse
Trex888 said:
davekaz said:
Downliad repair firmware from link below
This will comes with pit file
Flash repair firmware with pit file and hopefully this will solve the issue.
Make sure download correct firmware for your model.
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82[/QUOTE
Thanks again
placing a specific pit fit got me pass map and now gets stuck at hlo bin.. I think the downgrade firmware changed something cause windows sees phone as device called msm8960 . Odin sees it as far as a com port but beyond that its not a 910v anymore
Click to expand...
Click to collapse
Click to expand...
Click to collapse
davekaz said:
Trex888 said:
davekaz said:
Downliad repair firmware from link below
This will comes with pit file
Flash repair firmware with pit file and hopefully this will solve the issue.
Make sure download correct firmware for your model.
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82[/QUOTE
Thanks again
placing a specific pit fit got me pass map and now gets stuck at hlo bin.. I think the downgrade firmware changed something cause windows sees phone as device called msm8960 . Odin sees it as far as a com port but beyond that its not a 910v anymore
Click to expand...
Click to collapse
Try different odin version and different usb cable
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Trex888 said:
davekaz said:
Trex888 said:
Try different odin version and different usb cable
Click to expand...
Click to collapse
I tried several versions of odin and its definitely not cord
Thanks again
Click to expand...
Click to collapse
Click to expand...
Click to collapse
davekaz said:
Trex888 said:
davekaz said:
I tried several versions of odin and its definitely not cord
Thanks again
Click to expand...
Click to collapse
Try this method if your bootloader is unlocked or you got developer edition n910v.
Flash twrp in odin
Make complete wipe 3× 3 times
(dalvik cache/data/cache/system/internal storage)
After wipe go to download mode
Close odin and open again as (run as administrator)& upload firmware (AP)
Hit start Flash firmware
After flash firmware DONT LET THE PHONE BOOT
go to recovery
Wile cache & data factory reset
Reboot & wait 5 to 10 minutes.
Report back
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Trex888 said:
davekaz said:
Trex888 said:
Try this method if your bootloader is unlocked or you got developer edition n910v.
Flash twrp in odin
Make complete wipe 3× 3 times
(dalvik cache/data/cache/system/internal storage)
After wipe go to download mode
Close odin and open again as (run as administrator)& upload firmware (AP)
Hit start Flash firmware
After flash firmware DONT LET THE PHONE BOOT
go to recovery
Wile cache & data factory reset
Reboot & wait 5 to 10 minutes.
Report back
Click to expand...
Click to collapse
thanks for trying but I just bought the phone and was trying to downgrade to unlock..so dont think twrp will take..
I appreciate all you help but im screwed
Click to expand...
Click to collapse
Click to expand...
Click to collapse
davekaz said:
Trex888 said:
Restart pc and try latest firmware again[/QU
THANKS FOR REPLY ive tried every imaginable firmware for it including newest it was on and still get pit error
Click to expand...
Click to collapse
Did you solve your issue?
Click to expand...
Click to collapse
I did it..! SOLVED..!
alca00 said:
davekaz said:
Did you solve your issue?
Click to expand...
Click to collapse
Trex888 said:
davekaz said:
Downliad repair firmware from link below
This will comes with pit file
Flash repair firmware with pit file and hopefully this will solve the issue.
Make sure download correct firmware for your model.
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
Click to expand...
Click to collapse
I did it..! Using this repair firmware, I have repaired my Samsung N910V. Many thanks to Trex888..! I just flashed it by Odin using this file, and I hope this can help others with same issue (soft bricked Note4 N910V).
Thanks a lot again Trex888..!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
alca00 said:
alca00 said:
Trex888 said:
I did it..! Using this repair firmware, I have repaired my Samsung N910V. Many thanks to Trex888..! I just flashed it by Odin using this file, and I hope this can help others with same issue (soft bricked Note4 N910V).
Thanks a lot again Trex888..!
Click to expand...
Click to collapse
Congrats ! Glad to hear that .
Click to expand...
Click to collapse
Click to expand...
Click to collapse
alca00 said:
davekaz said:
Did you solve your issue?
Click to expand...
Click to collapse
yes it was the damned usb cord..Lol everything went smooth after that
Thanks to all
Click to expand...
Click to collapse
I had same issue, fail on all firmware (Verizon Note 4), changed usb cord, flashed back to stock and was even able to downgrade (5.0.1).
Pls help me out guys.....my two weeks old samsung note 4 is stock on Software Update Failed
Your device didnt update successfully. Use the Verizon Software Repair Assistant on a computer to repair your device and complete the update.
My phone details:
Model: SM-N910V
SKU: SMN910VZKE
Thanks.
Does anyone have this file? The page is dead.
Dear all,
i got a samsung Note 4 . Device had a sticker SM-910 F with matching imei on software. One day I hard rest my device then it imei shows Null and it became restart after 1 to 2 minutes in lop. this device has Verizon mother board. and also do not show the usb cable option. I want to install Verison stock firmware but no device detected in odin. Kindly anyone help me to install firmware through SD
Sumupali said:
Dear all,
i got a samsung Note 4 . Device had a sticker SM-910 F with matching imei on software. One day I hard rest my device then it imei shows Null and it became restart after 1 to 2 minutes in lop. this device has Verizon mother board. and also do not show the usb cable option. I want to install Verison stock firmware but no device detected in odin. Kindly anyone help me to install firmware through SD
Click to expand...
Click to collapse
A 910F with a Verizon mobo?
Might be tricky to flash.
You can access download mode?
Tried different cables / USB ports?
I really doubt that you can flash stock ROM from SD when phone is boot looping.
Maybe with terminal but you would have to flash TWRP for that first.
So after I flashed the stock rom back on the phone is functioning good and everything seems to be in order. However when i try to root it it gives me this error in odin http://prntscr.com/g3sml0 . Does anyone know why this is happening to my SM-G935U ???
Thanks for the help in advance
I still get secure check fail in odin for no reason at all
intramorph said:
I still get secure check fail in odin for no reason at all
Click to expand...
Click to collapse
It sounds like a bad download. I think you need the .tar file and not the tar.md5 file...
check and try again.
intramorph said:
So after I flashed the stock rom back on the phone is functioning good and everything seems to be in order. However when i try to root it it gives me this error in odin http://prntscr.com/g3sml0 . Does anyone know why this is happening to my SM-G935U ???
Thanks for the help in advance
Click to expand...
Click to collapse
I've tried rooting SM-G935U multiple times. The ENG boot image flashes fine in Odin but once it boots into the OS it reboots every 45-60 seconds. I never get to flash the root.bat
I'm thinking something has definitely changed. Others aren't reporting quite the same struggle I'm experiencing (at least not to the extent I have.) I just got this phone 2 weeks back. It came with Nougat.
Though I don't get any errors in Odin. Are you using the modified version?
KLit75 said:
I've tried rooting SM-G935U multiple times. The ENG boot image flashes fine in Odin but once it boots into the OS it reboots every 45-60 seconds. I never get to flash the root.bat
I'm thinking something has definitely changed. Others aren't reporting quite the same struggle I'm experiencing (at least not to the extent I have.) I just got this phone 2 weeks back. It came with Nougat.
Though I don't get any errors in Odin. Are you using the modified version?
Click to expand...
Click to collapse
No i'm using the original one from sam's mobile. I'm also on nougat. I had the same issue the first time i tried to root,got stuck in a reboot loop so i had to flash original firmware. After that my phone is working as intended but i get this error in odin now. Is there another way to root this device or am i out of luck xD
By modified version do you mean if it's a t-mobile device "for example" with the U firmware flashed? in that case no it's the original SM-G935U device.
TheOne741 said:
It sounds like a bad download. I think you need the .tar file and not the tar.md5 file...
check and try again.
Click to expand...
Click to collapse
Hi and where can i find the .tar file please. Forgive me for being such noob
intramorph said:
Hi and where can i find the .tar file please. Forgive me for being such noob
Click to expand...
Click to collapse
G935U Bootloader is locked
take a look here
https://
forum.xda-developers.com/sprint-s7-edge
intramorph said:
No i'm using the original one from sam's mobile. I'm also on nougat. I had the same issue the first time i tried to root,got stuck in a reboot loop so i had to flash original firmware. After that my phone is working as intended but i get this error in odin now. Is there another way to root this device or am i out of luck xD
By modified version do you mean if it's a t-mobile device "for example" with the U firmware flashed? in that case no it's the original SM-G935U device.
Click to expand...
Click to collapse
By modified I just meant the version of Odin youre using.
When you say you had to flash back to the original firmware, do you happen to know which version?
KLit75 said:
By modified I just meant the version of Odin youre using.
When you say you had to flash back to the original firmware, do you happen to know which version?
Click to expand...
Click to collapse
I do i used this one https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935U/TMK/download/G935UUES4BQG1/181625/
also i tried the modified version of odin as well as the latest. By now i've just given up. it's just not worth it imo
intramorph said:
I do i used this one https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935U/TMK/download/G935UUES4BQG1/181625/
also i tried the modified version of odin as well as the latest. By now i've just given up. it's just not worth it imo
Click to expand...
Click to collapse
I hear ya. Long process only to have it not work.
But when I asked about the firmware I meant the one you successfully rooted last. The one you posted was the same one I tried. And like I said, eng boot flashed fine but the subsequent reboot loop made it impossible to run the root.bat
My only theories are either something was changed by samsung and/or the devices that previously had M installed ARE able to be rooted.
One thing Im certain of is the new firmware does not like that engineering boot img.
But Im still holding out hope for root...
KLit75 said:
I hear ya. Long process only to have it not work.
But when I asked about the firmware I meant the one you successfully rooted last. The one you posted was the same one I tried. And like I said, eng boot flashed fine but the subsequent reboot loop made it impossible to run the root.bat
My only theories are either something was changed by samsung and/or the devices that previously had M installed ARE able to be rooted.
One thing Im certain of is the new firmware does not like that engineering boot img.
But Im still holding out hope for root...
Click to expand...
Click to collapse
It wasnt successful. It send me into a boot loop. Much like you. I couldn't run the root.bat file either. After that I just flashed original rom and that's it
Sent from my SM-G935U using Tapatalk
KLit75 said:
I hear ya. Long process only to have it not work.
But when I asked about the firmware I meant the one you successfully rooted last. The one you posted was the same one I tried. And like I said, eng boot flashed fine but the subsequent reboot loop made it impossible to run the root.bat
My only theories are either something was changed by samsung and/or the devices that previously had M installed ARE able to be rooted.
One thing Im certain of is the new firmware does not like that engineering boot img.
But Im still holding out hope for root...
Click to expand...
Click to collapse
Hey man i was wondering if you still want to root. here's what worked for me. https://forum.xda-developers.com/tm...eres-how-rooted-nougat-s7-edge-g935t-t3567502 . This method works for the sm-g935u. Also xposed works as well
The only thing i could find that was wrong was that my device was a bit laggy after rooting it but i gave it some time and it's lag-free now. I'm glad i did this. The downside is there's no custom recovery but maybe we'll get one soon. Good luck
intramorph said:
Hey man i was wondering if you still want to root. here's what worked for me. https://forum.xda-developers.com/tm...eres-how-rooted-nougat-s7-edge-g935t-t3567502 . This method works for the sm-g935u. Also xposed works as well
The only thing i could find that was wrong was that my device was a bit laggy after rooting it but i gave it some time and it's lag-free now. I'm glad i did this. The downside is there's no custom recovery but maybe we'll get one soon. Good luck
Click to expand...
Click to collapse
I just rooted it Sunday night but thanks for letting me know!:good:
If you could though, please tell me which version of xposed you flashed. Was it the purify os v87 sdk24 from 7/26?
KLit75 said:
I just rooted it Sunday night but thanks for letting me know!:good:
If you could though, please tell me which version of xposed you flashed. Was it the purify os v87 sdk24 from 7/26?
Click to expand...
Click to collapse
it was purifyos and you flash the zip in Flashfire mount system