Database Users

Recovery bricked after Nougat update?

First excuse me for opening an other thread like this, i think i have read all other threats regarding my problem, but none have the same situation
My Huawei M3 Wifi (BTV-W09) seems semi bricked after installation of Nougat Update.
The Installation (Force Install with dload) gave me an error and also while boot i got the error message: "Your device has failed verification and may not work properly."
I have the option to press "Powerbutton" and the device will boot up. I checked the Version and it showed android 7 + EMUI 5. The only problem was that almost every system app was missing, like keyboard, calendar etc. (playstore was there)
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error. I have ADB/Fastboot installed and tried some different things like flashing/unbricking it with "Huawei Multitool" where you can extract like boot.img or recovery.img and try to flash it.
Also getting an error. I can access eRecovery witout problems, the option to fix it by itself by wifi doesn`t work. I can´t access "normal" recovery and i think there is the problem (may got bricked while flashing Nougat?) I think its recovery problem, cause when i boot it up to the "half-installed" Android and go into setting "hard-reset" option i know it would boot up intoi recovery and would erease everything, while bootup it shows error "reset failed".
In fastbootmode i see bootloader: unlocked FRM: unlocked
I tried to install TWRP recovery with adb but get error: adb remote command not allowed
I downloaded like 15 different Android Versions 6+7 Emui 4.1+5 to try with force update but none worked, may i have to flash special version of recovery first?
I just want a normal version of android 6 or 7 i dont mind but at the moment with half working 7 "without" systemapps its a hardtime.
I hope someone can help me.
This isnt my first android device and im not a total noob i unlocked bootloader and flashed kernels on many other phones but with the W-09 where i did nothing special i dont get why "recovery got broken"
Thanks in advance

You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.

nicolap8 said:
You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.
Click to expand...
Click to collapse
thanks for your anwser, i read that so i also tried unlocking it "again" and it quotet it is also unlocked in adb. I also know that there are 2 packages. That you need TWRP i didnt know thanks so i am a bit smater now. I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.

kivi90 said:
I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.
Click to expand...
Click to collapse
This is nonsense. Unlock, install the right TWRP then install the second zip package.

nicolap8 said:
This is nonsense. Unlock, install the right TWRP then install the second zip package.
Click to expand...
Click to collapse
i cant unlock cause i dont have the code, on the huawei page i try do make an account and get the code by providing the necessary information.
I just uploaded a picture, i choose "before EMUI5" cause this is the only option i can choose "tablets". --> i choose "tablet wifi" , enter product model "BTV-W09" then the serialnumber i can see in setting: 28D6R17316XXXXXX but then i have the problem to input product id, it say i can get it through "Dialer" app (which i dont have in wifi model ) or the calculator. Problem is in my damaged installation there is no huawei calc, other calcs from store dont work (read that problem in other threats) I tried many apps from appstore to get a product ID but huawei site keeps saying wrong product ID =/
With the program DC Unlocker i am able to see a MEID i dont know if its the right one, i tried my luck with the Product ID Generator from Huawei but it doenst work. (device not supported)

It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!

nicolap8 said:
It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!
Click to expand...
Click to collapse
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.

Did you ever find a fix
Did you ever find a way to fix this. I'm in the same situation. I even did a VPN on my router to give me a Hong Kong address for erecovery and that still didn't work. I have the exact same product. Like you I tried to various attempts to download a new recovery, but nothing works. Nice hardware, but some of the worst software/firmware I have ever dealt with since starting with the first release of Android on the HTC Hero.

kivi90 said:
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.
Click to expand...
Click to collapse
I had mostly the same problem. I rolled back to 4.1 using the rollback and the actual 4.1 update.app. I think that puts you on C100 if I remember right. Tablet I have is C128 (USA) but no problem for this step. Get the Product ID from the calculator. Allow OEM unlock in the settings, then unlock it using the unlock code. Email yourself the unlock code because who knows if their website will even be functional next time. Alternatively you can extract the stock calculator from the update_data_usa.zip or whatever and try to use DC with 5.0. That second update zip does not install properly via the dload method, so a bunch of stock apps don't get installed. You can kind of hack it and flash it via TWRP but I didn't do it that way.
Or...you can use firmware finder to force an OTA from 4.1 right up to 5.0 (350), then take that last partial OTA to 351 after as well. The way to do that is via DNS in firmware finder. Find the Full OTA in firmware finder you want, send it to the updater by changing your DNS the way it tells you to, and when it does the OTA, everything will be properly installed basically the official way. Good as new. Flash TWRP to recovery2 and replace the erecovery. Keep the stock recovery as is. Install magisk. Golden.
---------- Post added at 03:36 AM ---------- Previous post was at 03:26 AM ----------
kivi90 said:
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error.
Click to expand...
Click to collapse
Also, as far as the rollback, you need to do the first one (the C900 which is just a compatibility fix to allow rollback, previously used by beta testers I believe). Then you need to do the second one, the C100. If it is getting stuck, try downloading it again and be sure you don't have anything else in the /dload directory on either internal or the sd card. I had one on both at one point so maybe that happened to you. The C900 should be very quick but the C100 will slowly progress after 5% all the way around in several minutes.
When you get to updating back to 5.0, you can choose whichever region you want as long as it is a full OTA. C128 is USA and that's what I bought so that's what I picked. That gets you back in the right OTA update channel after that.

Hi guys,
I started as a novice and have learnt the hard way.
Has anyone tried rollback to EMUI 4.1 EU version on a US device (W09) and are there any problems I should be aware of?
I have had the exact same problem shared in this thread and have gone through the pain of finding a solution. My last resort is to rollback to 4.1 and restart the whole process.
@deV14nt: you suggested that when updating back to EMUI 5.0, I can choose the region even if my EMUI4.1 is EU version. How does this work?
Thanks in advance for your help.

DANGEROUS UPDATE : C432B185; do not apply

Hello,
I just applied the latest update C432B185 on a 8 pro honor; it remains blocked at restart. Another user reports an identical problem on the FRANDROID site.
Do not apply this update because the problem is blocking; you will no longer be able to use your honor 8 pro.
Solution on hold.
Thank you

I have the exact same problem. I started the update, and put it back in my pocket. I grabbed my phone after a few minutes and blindly touched the fingerprint sensor and pressed where normally the home button is. Instead, I catched a glimpse of a black screen, a triangle and a button. The button was at almost the same spot as where the home button normally is, so I clicked it and my phone restarted. After that, the only thing my phone does right now is show the white Honor logo with a lightblue blackground.
I already tried everything that can be done, I think.
Restarted the phone 20 times, did a 'user reset', cleared the cache 20 times and did a lot of factory resets (sometimes stuck at 99%).
Nothing made my phone work again. I also tried to use eRecovery to 'Download latest version and recovery' but that only resulted in 'Getting package info failed'.
If someone has any clue to what can be done to revive the Honor 8 Pro again (or to see some kind of logs to view what's going on), please... help! :crying:
The topic on Frandroid that Pascal was talking about: forum.frandroid.com/topic/261525-mise-%C3%A0-jour-qui-plante-le-smartphone

Hello,
I have exactly the same problem with my honor 8 pro.
I can't use it anymore, the user reset is staying 99%
If someone has a solution...

Also had the update, tried everything, wanted to flash other rom but i haven't got my product ID to unlock the bootloader.
Worst part of all, there is no care centre in The Netherlands...
so what im suppose to do? not sure at all, eRecovery fails,
using the dload method fails.
nothing seem to work atm...

Thank you for sharing this. It's not released in India yet seems but disabled the auto download update over wifi feature just in case.

Also, I can't connect to the phone with ADB or fastboot. /adb reboot recovery returns error: device unauthorized. This adb server's $ADB_VENDOR_KEYS is not set and ./fastboot getvar all returns FAILED (remote: Command not allowed). HiSuite (never tried before) can't find my phone on OSX and crashes after 5 minutes.
No root, no unlocked bootloader. Also shows FRP is locked.

Same here (france) Factory reset doesn't work, dload method doesn't either and the WIFI update doesn't find anything so I'm stuck with no phone for the moment :'(

Same here (Poland). Phone is bricked, second visit in service within 2 months :/

Oh ,god, i was about to let people know that a new update b185 had just come up until i see this post...I immediatly stopped the downloading process of this Update, so bad news for the ones who already applied the update and who got stuck now...
There might be an ultimate solution for bricked phone by using the DC Phoenix unlock software method...

Same Problem with the Honor 8Pro update
Hi,
Same problem in the Netherlands, Brabant.
Just downloaded the update for the Honor 8Pro.
Tried everything, also the eRecovery, Same problem with the package Failure.
Also E-mailed to HiHonor for an sollution, nothing so far.
Somebody got any tip? Can miss my phone for work..
Greeting from Oss, The Netherlands.

Same problem
Same problem here in The Netherlands. Literally nothing works. Never even rooted this device or anything like that. Also, what is this "download and recovery" in eRecovery even for if nothing downloads? I am very disappointed in this. Have no idea what I should be doing while normally I find a way to work around such problems.

TheVeeeMan said:
Same problem here in The Netherlands. Literally nothing works. Never even rooted this device or anything like that. Also, what is this "download and recovery" in eRecovery even for if nothing downloads? I am very disappointed in this. Have no idea what I should be doing while normally I find a way to work around such problems.
Click to expand...
Click to collapse
Zelfde probleem hier en nu een onbruikbare telefoon...
Nog geen half jaar oud!
Ik heb net Honor gemaild .. even afwachten tot morgen..
Sterkte alvast!

Thank you for the warning!

flash a stock rom by -=MoRpH=-.
these are factory firmwares and reset your device back to full stock, yes, even with locked bootloader!
Regards

OldDroid said:
flash a stock rom by -=MoRpH=-.
these are factory firmwares and reset your device back to full stock, yes, even with locked bootloader!
Regards
Click to expand...
Click to collapse
I have explicitly chosen to not root or otherwise mod my phone just yet. Does this void your warranty? Right now, I can send it back to the supplier and they will fix it. Of course if something else is faster (supplier says max. 3 weeks) then I am happy to try, if it does not void my warranty.
EDIT: and also, how can I see which version I need? I don't know how for sure which version I have, and of course I can't get into the UI anymore. As I posted before, ADB and Fastboot don't give me any info.

OldDroid said:
flash a stock rom by -=MoRpH=-.
these are factory firmwares and reset your device back to full stock, yes, even with locked bootloader!
Regards
Click to expand...
Click to collapse
Hello,
that didn't work.
:crying:

Krystal666 said:
Oh ,god, i was about to let people know that a new update b185 had just come up until i see this post...I immediatly stopped the downloading process of this Update, so bad news for the ones who already applied the update and who got stuck now...
There might be an ultimate solution for bricked phone by using the DC Phoenix unlock software method...
Click to expand...
Click to collapse
Thank you.
I have made use of many Huawei phones in recent years (Mate 7, Mate 9, P8 Lite, P9 Lite) and Honor 8 Pro. I quickly realized that this update was blocking; it was common sense to inform users of the Honor 8 Pro in order to limit the number of service returns, unnecessary time wastage, etc.
This is our precious ...
Welcome

Here in Holland this morning the same problem.

Thanks for the Info. No update notice for my phone (in Germany). Hopefully Huawei/Honor will have stopped the update rolling out. Jeez, don't these updates get tested before they're released?

You can use Firmware Finder for PC to send an update for installation via erecovery with changing your routers DNS.
Erecovery is used in customer services to install manually sent updates only. That's why it can't find anything without sending an update to your device.

How do i get 7.0 on this tablet?

I just got this tablet from Amazon and it came with Android 6.0 and it says there is not an update available. How do I get stock 7.0 on it? I had read reviews that said it was updated which is one of the reasons I bought it.

I never got an OTA for 7 I had to use Firmware Finder in the play store. It found it, downloaded it and installed it.
Sent from my Pixel XL using Tapatalk

Here’s how I upgraded. Reposted from another forum.
The update checker was a non-starter for me until I used it with firmware finder and bypassed having to use a micro+SD card in order to upgrade to EMUI 5. First, I picked the 2.5gb file option within firmware finder which is basically EMUI 5, chose the get an update using dns beta option. Added the dns address that firmware finder provided to my wifi settings by holding down your wifi, choosing modify network, tick advanced options, change settings to static, and then change the dns to the one provided by firmware finder. From there, it downloaded the file, but once finished it passed it on to Huawei's upgrader app and it took over from there. Just remember to remove the dns address from your wifi settings when finished. As I mentioned didn't need to use a SD card and once finished, checked the Huawei updator again and there was another small update available. I thought it was the easiest way to upgrade without having to do too many steps. Once the file was passed on to the Huawei upgrader, it did all the work.

Mediapad M3 Upgrade
Dear friend I have also bought these wonderful tablets these days, I have the same problem, so I installed "firmware finder" app so I can download the new firmware for emui 5.0 btv-w09c100b302, I do not know if the procedure is correct, light forums before upgrade, I would like someone to tell me if I can proceed safely with the upgrade, thank you

I posted how I did it above and it’s correct, and it’s safe. Follow the directions.

okay it's not super clear with Firmware Finder version 6.6 but I finally watched enough videos to figure it out.
Install Firmware Finder
Tap on your model number (should pop up right away at top)
Tap on latest FULL version
Check Firmware access
Tap IN-APP PROXY
Goto wifi settings and press hold your wifi
tap modify
show advanced
PROXY select manual
Proxy hostname: localhost
Proxy port 8080
save or connect
Go to Settings
system update
check for update. It should then show an update. Tap and let it download and install.
Edit: I do not recall having to change the DNS setting. I just checked and mine was still set to DHCP so I am sure I did not change it. Once done with update though do go back and remove the Proxy setting.

ahent said:
I never got an OTA for 7 I had to use Firmware Finder in the play store. It found it, downloaded it and installed it.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
I got a BTV-W09C128B005 FW version (USA from Amazon). Updater didn't show any updates. I downloaded a two folder update. I unpacked them (.zip) and put on an SD card under 'dload'. I pressed the vol up/ vol down and power to start the update. It worked and went to BTV-W09C128B350. I then deleted the contents of the 'dload' folder on the SD card, and replaced them with the unpacked USA data upgrade files. The data folder included a lot of app .apks including one called 'bluetooth'. The force update for the 2nd set of files took very little time, and it didn't seem to do anything. It didn't update or install any apps from the data folder, and the vers. stayed at B350. Now bluetooth won't turn on, and the 'update' app is missing from the 'settings' menus. I can't use the other update methods because they use the missing update app.
Huawei cust. support chat assured me that the Android 7 update (OTA) would arrive if I was patient enough. (6 months, yeah right.)
I'm returning this to Amazon to start over. This time I'm going to try other methods that use the updater app, or log into the PC program HiSuite to see if it pushes the update properly.

You chose the complicated way to upgrade. My input ( above ) for how to upgrade is a lot easier and is less riskier as Huawei's upgrade software is involved. Your call, but if you hit a brick wall on other ways to upgrade, consider my suggestion.

Thanks dude (@b4u2), worked like a charm!

hondoslack said:
Thanks dude (@b4u2), worked like a charm!
Click to expand...
Click to collapse
I completely agree with you, it works very well!
Does anyone know what are 500 MB update ?
Are those security / bug fix updates ?

JJ86 said:
I completely agree with you, it works very well!
Does anyone know what are 500 MB update ?
Are those security / bug fix updates ?
Click to expand...
Click to collapse
Looked like security patches and bug fixes to me. They installed after I did the full update. I really like this tablet now that it's on 7.0

b4u2 said:
Looked like security patches and bug fixes to me. They installed after I did the full update. I really like this tablet now that it's on 7.0
Click to expand...
Click to collapse
Did they installed without the app Firmware Finder ?
I like it too with Android 7.0 , despite all the bloatware apps (I'm coming from a Nexus 7).

JJ86 said:
Did they installed without the app Firmware Finder ?
I like it too with Android 7.0 , despite all the bloatware apps (I'm coming from a Nexus 7).
Click to expand...
Click to collapse
For me they installed without firmware finder. Right after first boot, I went to System Settings, and the Update section showed the OTA update. It installed 2. Only thing disappointing is that they haven't released an update to fix KRACK yet.

callanish said:
Here’s how I upgraded. Reposted from another forum.
The update checker was a non-starter for me until I used it with firmware finder and bypassed having to use a micro+SD card in order to upgrade to EMUI 5....
Click to expand...
Click to collapse
I stupidly tried an SD card method first, and ended up with an upgraded tablet with no Bluetooth and keyboard issues. Finally got back to original state and followed @callanish method. Worked beautifully and easily. Anyone else looking to update, I'd suggest this easy method that works. Thanks @callanish! (seriously registered here just to say thanks)

hondoslack said:
For me they installed without firmware finder. Right after first boot, I went to System Settings, and the Update section showed the OTA update. It installed 2. Only thing disappointing is that they haven't released an update to fix KRACK yet.
Click to expand...
Click to collapse
I wasn't so lucky: I had to install it with Firmware Finder (only the one of ~500MB).
Can you please tell me which security patch level do you have ?
I have those of May 2017.

That's what I have, May if 2017. I also used firmware finder and to my knowledge, that's the newest available for this tablet.
Sent from my Pixel XL using Tapatalk

JJ86 said:
I wasn't so lucky: I had to install it with Firmware Finder (only the one of ~500MB).
Can you please tell me which security patch level do you have ?
I have those of May 2017.
Click to expand...
Click to collapse
Mine is also May 2017.

PittTango said:
I stupidly tried an SD card method first, and ended up with an upgraded tablet with no Bluetooth and keyboard issues. Finally got back to original state and followed @callanish method. Worked beautifully and easily. Anyone else looking to update, I'd suggest this easy method that works. Thanks @callanish! (seriously registered here just to say thanks)
Click to expand...
Click to collapse
I did this too, because the instructions in FF app were crap for the other methods. I found the SD card method and ran with it. It didn't put the USA data files on that included the keyboard and bluetooth, and updater app.
I had to return mine to Amazon and try again using the DNS / Updater app method on FF. This time it worked great! This tablet is sooo much better with updated launcher and Android 7.
How on earth did you get it back to original state without sending it back?
---------- Post added at 07:00 PM ---------- Previous post was at 06:53 PM ----------
ahent said:
That's what I have, May if 2017. I also used firmware finder and to my knowledge, that's the newest available for this tablet.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
I think there is a security patch level more recent than May '17.
I got my US version with the B005 FW vers. It had a SP level of something like Aug '17 (I don't remember exactly, but it after May of this year.)
It showed no updates in the updater app, but I upgraded it using FF app, and now it says May '17 for the SP level.
I don't think Huawei ever intended US versions to get the Android 7 update because it doesn't comply with current SP levels.

Hi all, I have a question, when I open Firmware Finder I have a list of 4 FullOTA (see attached screenshot), all with the same release date, how can I choose the right one?

@fidrat I worded that poorly. I used the same technique you did, started with a new one.

BND-L21 UK Honor 7X - full Oreo OTA updates OK in Firmware Finder

Hi, UK Honor 7x owner. Had it direct from Honor when it first came out.
I was on BND-L21C432B101 when I first bought it and the only update I could get to update in Huawei firmware finder was the B102 update - I did that update a good while ago and never got any updates via the official update checker and no other update in firmware finder was OK to install via the "check firmware access" .
I have been hitting check for updates many times over the last week but no show. So feeling reckless I set firmware finder to full OTA only and the Oreo update was listed - checked via the "check firmware access" and it said it was OK to install. So set the auto DNS-VPN option and the phone updater picked up the full Oreo OTA (2.47gb BND-L21C432CUST432D2B330 (8.0.0.330)) and it downloaded fine, did a verification OK, then some other check that seem to fail - but I disabled the Firmware Finder VPN and hit to check again and all OK, reboot and it did the update and now on Oreo
Oreo works fine. My impressions (note I use nova launcher prime so my home screen looks and works the same as before).
Pretty underwhelming, 3 advantages. 1) latest security update. 2) face unlock (but it's a bit hit and miss) so finger print unlock is still the way to go. 3) Nav bar hide function - but a bit clunky as it doesn't auto hide. 4) treble support but no really solid ROMs to try yet so a bit niche
And that's about it! So if your stuck without Oreo at the moment then don't get too stressed out unless you absolutely can't survive without the latest security update.
I had heard H7 Oreo was treble compliant - and a checker says it is but not seamless updates (two partition requirement).
Cheers

So does it all work as expected then mate? Just downloaded it via your method, haven't installed yet though.
EDIT: No worries, works like a charm. Thanks man.

npx420 said:
So does it all work as expected then mate? Just downloaded it via your method, haven't installed yet though.
EDIT: No worries, works like a charm. Thanks man.
Click to expand...
Click to collapse
I tried to update for the same but it keeps on saying download failed. What to do now?

arvinsheet said:
I tried to update for the same but it keeps on saying download failed. What to do now?
Click to expand...
Click to collapse
Make sure you are running the VPN in firmware finder, should have no problems then.

npx420 said:
Make sure you are running the VPN in firmware finder, should have no problems then.
Click to expand...
Click to collapse
I tried the auto and manual through DNS and still download failed. I also tried the in-app proxy and still fails to download. But when I press on download from the FF app, it's downloading fine. But I'm not sure how install it that way.

sipart said:
Hi, UK Honor 7x owner. Had it direct from Honor when it first came out.
I was on BND-L21C432B101 when I first bought it and the only update I could get to update in Huawei firmware finder was the B102 update - I did that update a good while ago and never got any updates via the official update checker and no other update in firmware finder was OK to install via the "check firmware access" .
I have been hitting check for updates many times over the last week but no show. So feeling reckless I set firmware finder to full OTA only and the Oreo update was listed - checked via the "check firmware access" and it said it was OK to install. So set the auto DNS-VPN option and the phone updater picked up the full Oreo OTA (2.47gb BND-L21C432CUST432D2B330 (8.0.0.330)) and it downloaded fine, did a verification OK, then some other check that seem to fail - but I disabled the Firmware Finder VPN and hit to check again and all OK, reboot and it did the update and now on Oreo
Oreo works fine. My impressions (note I use nova launcher prime so my home screen looks and works the same as before).
Pretty underwhelming, 3 advantages. 1) latest security update. 2) face unlock (but it's a bit hit and miss) so finger print unlock is still the way to go. 3) Nav bar hide function - but a bit clunky as it doesn't auto hide. 4) treble support but no really solid ROMs to try yet so a bit niche
And that's about it! So if your stuck without Oreo at the moment then don't get too stressed out unless you absolutely can't survive without the latest security update.
I had heard H7 Oreo was treble compliant - and a checker says it is but not seamless updates (two partition requirement).
Cheers
Click to expand...
Click to collapse
Hi, I tried to update through manual and auto DNS but it keeps saying download failed. I tried to download the package directly but I'm not sure how to install it. It shows no option. Do you happen to know how to do it?

arvinsheet said:
Hi, I tried to update through manual and auto DNS but it keeps saying download failed. I tried to download the package directly but I'm not sure how to install it. It shows no option. Do you happen to know how to do it?
Click to expand...
Click to collapse
Suspect you would need to use a custom recovery after the update has been extracted. I can only point you at my original post for doing it the way I did it. Using the auto-dns VPN option worked for me. I assume the firmware finder servers must suffer some overload sometimes perhaps? Perhaps try at a completely different time of day you have tried before? Are you using mobile data or home BroadBand WiFi?
Sent from my BND-L21 using Tapatalk

sipart said:
Suspect you would need to use a custom recovery after the update has been extracted. I can only point you at my original post for doing it the way I did it. Using the auto-dns VPN option worked for me. I assume the firmware finder servers must suffer some overload sometimes perhaps? Perhaps try at a completely different time of day you have tried before? Are you using mobile data or home BroadBand WiFi?
Sent from my BND-L21 using Tapatalk
Click to expand...
Click to collapse
I tried to update via pc using an older version of HiSUITE and Firmware Finder PC and seems to be working that way. Update is still downloading at the moment. Pretty excited here. :laugh::laugh:

arvinsheet said:
I tried to update via pc using an older version of HiSUITE and Firmware Finder PC and seems to be working that way. Update is still downloading at the moment. Pretty excited here. :laugh::laugh:
Click to expand...
Click to collapse
Did it work ?

SquallPT said:
Did it work ?
Click to expand...
Click to collapse
Yes it did. I'm now enjoying my long awaited Oreo update.

arvinsheet said:
Yes it did. I'm now enjoying my long awaited Oreo update.
Click to expand...
Click to collapse
Tried with at least 5 different versions of hisuite, it always says it is up to date. Changed DNS on computer and on hisuite and no luck

SquallPT said:
Tried with at least 5 different versions of hisuite, it always says it is up to date. Changed DNS on computer and on hisuite and no luck
Click to expand...
Click to collapse
Follow the link below.. install the HiSuite version that they used there and all should be working.
https://www.youtube.com/watch?v=8wH0N2brgTA&t=12s

Any of you tried connecting into a VPN whilst tether to this device?
I know Samsung devices won't allow you to when data savings is enabled, but I can't get it to work on this device.
Tempted to unlock the bootloader and put LineageOS but I've read it reduces the battery life significantly
I've found an update to 8.0.0.331, but that is for the L21C10. Not sure what the difference is compared to the L21C432

arvinsheet said:
Follow the link below.. install the HiSuite version that they used there and all should be working.
&t=12s
Click to expand...
Click to collapse
No way, you are not going to believe this. Yesterday I tried with that version and it didn't work, today it worked! Running Oreo now :victory:
Many thanks for the help

SquallPT said:
No way, you are not going to believe this. Yesterday I tried with that version and it didn't work, today it worked! Running Oreo now :victory:
Many thanks for the help
Click to expand...
Click to collapse
congratulations! :highfive:

SquallPT said:
No way, you are not going to believe this. Yesterday I tried with that version and it didn't work, today it worked! Running Oreo now :victory:
Many thanks for the help
Click to expand...
Click to collapse
Hi,
Which version have you downloaded?
I've downloaded BND-L21C432CUSTC432D2B330 - 8.0.0.330 - 133039, but right after reach 99%, pops up a message saying "Download Failed"...

Hi guys, just a quick question. Have H7 dual SIM. BND L21 124. If upgrade to oreo will it keep dual sim?
No joy updating. Downloaded the oreo full OTA but failed at 5%. Tried with 3key combo and *#*#2846597#*#* but no joy...
Don't want to mess with the phone (twrp , root etc) as bricked phone in the past.
Any other options to do the update? The FF says update is approved...

HELP ME PLEASE
My phone was stuck on Honor logo and then loop.
I tried to install update with twrp and I cant do that. (the way that I did before, but seems recovery.img cant loaded this time!)
now my phone has no operating system
it just has eRecovery and TWRP

Hey I'm just struggling a bit in what do d next after check firmwar Access. What do I do after that?

P9 Lite - VNS-L31C432B226 to Nougat

Hi guys!
Recently, one of the users of my app reported an issue with his Huawei P9 Lite VNS-L31C432B418. It's impossible to him to use my app, network calls are blocked in the app, the app won't connect to my backend endpoints for no reason. Logging is quite unclear, so it's hard to reproduce this issue.
Because of my dedication and urge to fix this issue, I ordered an Huawei P9 Lite on Amazon. (amazon.de/-/en/gp/product/B01DYN5OLE) It got delivered today, installed my app and woosh... Everything was working fine. The phone came with VNS-L31C432B160/EMUI 4.1.3; but the user of my app is using P9 Lite VNS-L31C432B418/EMUI 5.0.4. Hitting the "check for updates" did not result in receiving any update (Thanks Huawei!) so I started looking around the internet. I prefer to use exactly the same build version because I want to reproduce this (hard) issue.
So far so good, I used Firmware Finder to incrementally update to VNS-L31C432B226. I'm quite new in these firmware-hacks and tried installing the VNS-L31C432B418 version, but I got stuck at the 5% progress indicator. Using Firmware Finder on my PC, it checked that I'm able to install versions with G 2190 and g 1789. These params do not tell that much for me... Currently, I'm stuck at VNS-L31C432B226 as this is the last one that has G 2190 and g 1789. All the other ones have G 190 and g 1755, are these for other devices as the one I have since I am not able to install these ones?
Someone who can help me in order to get VNS-L31C432B418? Is this even possible on my device?
Thanks in advance, kind regards
Joren

JorenVos said:
Hi guys!
Recently, one of the users of my app reported an issue with his Huawei P9 Lite VNS-L31C432B418. It's impossible to him to use my app, network calls are blocked in the app, the app won't connect to my backend endpoints for no reason. Logging is quite unclear, so it's hard to reproduce this issue.
Because of my dedication and urge to fix this issue, I ordered an Huawei P9 Lite on Amazon. (amazon.de/-/en/gp/product/B01DYN5OLE) It got delivered today, installed my app and woosh... Everything was working fine. The phone came with VNS-L31C432B160/EMUI 4.1.3; but the user of my app is using P9 Lite VNS-L31C432B418/EMUI 5.0.4. Hitting the "check for updates" did not result in receiving any update (Thanks Huawei!) so I started looking around the internet. I prefer to use exactly the same build version because I want to reproduce this (hard) issue.
So far so good, I used Firmware Finder to incrementally update to VNS-L31C432B226. I'm quite new in these firmware-hacks and tried installing the VNS-L31C432B418 version, but I got stuck at the 5% progress indicator. Using Firmware Finder on my PC, it checked that I'm able to install versions with G 2190 and g 1789. These params do not tell that much for me... Currently, I'm stuck at VNS-L31C432B226 as this is the last one that has G 2190 and g 1789. All the other ones have G 190 and g 1755, are these for other devices as the one I have since I am not able to install these ones?
Someone who can help me in order to get VNS-L31C432B418? Is this even possible on my device?
Thanks in advance, kind regards
Joren
Click to expand...
Click to collapse
Hi Joren,
sorry if i ask but the weird (B226) update you done is android 6 or 7 ?
Starting from B160, you should have chosen B370 FULLOTA-MF-PV
to upgrade to android 7, then to latest B418...

Dadditz said:
Hi Joren,
sorry if i ask but the weird (B226) update you done is android 6 or 7 ?
Starting from B160, you should have chosen B370 FULLOTA-MF-PV
to upgrade to android 7, then to latest B418...
Click to expand...
Click to collapse
Hi, thanks for your reply! My device gotdelivered with version B172...
Today, I got an update to VNS-L31C432B228! This version is not visible in Firmware Finder... Any ideas how to update to Nougat?
Is it possible to force the update? I always get the message that the update is not compatible with my version.

JorenVos said:
Hi, thanks for your reply! My device gotdelivered with version B172...
Today, I got an update to VNS-L31C432B228! This version is not visible in Firmware Finder... Any ideas how to update to Nougat?
Is it possible to force the update? I always get the message that the update is not compatible with my version.
Click to expand...
Click to collapse
Dude,
how did you got that update and is this B228 android 6 or 7 ?

Dadditz said:
Dude,
how did you got that update and is this B228 android 6 or 7 ?
Click to expand...
Click to collapse
B228 update got over the air after having B226 from Firmware Finder , and it's still Android 6...

JorenVos said:
B228 update got over the air after having B226 from Firmware Finder , and it's still Android 6...
Click to expand...
Click to collapse
Ok,
use the app, same method and choose B370 FULLOTA-MF-PV.
It's 1.99 gbyte - date 21/03/2017 - G 753 - g 104.
Into my PC version of FF i see (2) two versions, looks the same, try one or the other..
If you will succeed you can update to the latest firmware (B418)..

Dadditz said:
Ok,
use the app, same method and choose B370 FULLOTA-MF-PV.
It's 1.99 gbyte - date 21/03/2017 - G 753 - g 104.
Into my PC version of FF i see (2) two versions, looks the same, try one or the other..
If you will succeed you can update to the latest firmware (B418)..
Click to expand...
Click to collapse
Thanks for your effort!
It seems to be the same URL for those two entries. Note that it's in fact a "downgrade", the "v" value is 80460. My device got delivered with B172 (which is also not found in FF), B173 is already 110304... Currently, B228 is also not visible in the list, B227 is 143951.
http://update.dbankcdn.com/TDS/data/files/p3/s15/G753/g104/v80460/f1/full/update.zip
http://update.dbankcdn.com/TDS/data/files/p3/s15/G753/g104/v80460/f1/full/update.zip
http://update.dbankcdn.com/TDS/data...-L31_hw_eu/update_data_full_VNS-L31_hw_eu.zip
http://update.dbankcdn.com/TDS/data...-L31_hw_eu/update_data_full_VNS-L31_hw_eu.zip
Unzipped "update.zip", copied it into dload folder on my SD card, *#*#2846579#*#* =, ProjectMenu -> Software Upgrade -> SDCard Upgrade ->OK
"Software install failed" "Incompatibility with current version. Please download the correct update package". Same story for the contents of the update_data_full_VNS-L31_hw_eu.zip.
I'd like to wipe the current firmware instead op updating/upgrading it, but I've already done lots of research, some docs are so outdated that they're not relevant anymore. Any clear steps on how to force install the version instead op upgrading it?

JorenVos said:
Thanks for your effort!
It seems to be the same URL for those two entries. Note that it's in fact a "downgrade", the "v" value is 80460. My device got delivered with B172 (which is also not found in FF), B173 is already 110304... Currently, B228 is also not visible in the list, B227 is 143951.
http://update.dbankcdn.com/TDS/data/files/p3/s15/G753/g104/v80460/f1/full/update.zip
http://update.dbankcdn.com/TDS/data/files/p3/s15/G753/g104/v80460/f1/full/update.zip
http://update.dbankcdn.com/TDS/data...-L31_hw_eu/update_data_full_VNS-L31_hw_eu.zip
http://update.dbankcdn.com/TDS/data...-L31_hw_eu/update_data_full_VNS-L31_hw_eu.zip
Unzipped "update.zip", copied it into dload folder on my SD card, *#*#2846579#*#* =, ProjectMenu -> Software Upgrade -> SDCard Upgrade ->OK
"Software install failed" "Incompatibility with current version. Please download the correct update package". Same story for the contents of the update_data_full_VNS-L31_hw_eu.zip.
I'd like to wipe the current firmware instead op updating/upgrading it, but I've already done lots of research, some docs are so outdated that they're not relevant anymore. Any clear steps on how to force install the version instead op upgrading it?
Click to expand...
Click to collapse
Dude, i'm here to help, at least for what i know...
I think i explained not so good...
You should use the app to upgrade not to download the firmware.
Take a look HERE, also some videos are on YT..
Just change the firmware with yours... :fingers-crossed:

Dadditz said:
Dude, i'm here to help, at least for what i know...
I think i explained not so good...
You should use the app to upgrade not to download the firmware.
Take a look HERE, also some videos are on YT..
Just change the firmware with yours... :fingers-crossed:
Click to expand...
Click to collapse
Tried in the app, it told me that B370 "The firmware is not approved for installation". B418 is approved (FullOTA-MF), so:
- I've downloaded the firmware (3 files)
- Setup in-app proxy
- Change wifi proxy to localhost:8080
- Check for updates, update is available
- Switch back to wifi, disable proxy
- Download update
- Install
Same story, update is incompatible... So I think I'm still doing something wrong while changing the firmware instead of upgrading. For me, the tutorials are skipping essential steps. Or I might have received a f*cked up device. Why on earth is it so hard to update, thanks Huawei..

JorenVos said:
Tried in the app, it told me that B370 "The firmware is not approved for installation". B418 is approved (FullOTA-MF), so:
- I've downloaded the firmware (3 files)
- Setup in-app proxy
- Change wifi proxy to localhost:8080
- Check for updates, update is available
- Switch back to wifi, disable proxy
- Download update
- Install
Same story, update is incompatible... So I think I'm still doing something wrong while changing the firmware instead of upgrading. For me, the tutorials are skipping essential steps. Or I might have received a f*cked up device. Why on earth is it so hard to update, thanks Huawei..
Click to expand...
Click to collapse
Are you choosing B370 fullota-mf-pv one ? (not B370 fullota-mf nor B370 ota)
Also now i see there a third B370 fullota-mf-pv with date 2017.08.03 - G 1258 - g 104..
If you don't upgrade to this version first,
you couldn't upgrade anyway to android 7
and then to latest version.
Come on try again...

Dadditz said:
Are you choosing B370 fullota-mf-pv one ? (not B370 fullota-mf nor B370 ota)
Also now i see there a third B370 fullota-mf-pv with date 2017.08.03 - G 1258 - g 104..
If you don't upgrade to this version first,
you couldn't upgrade anyway to android 7
and then to latest version.
Come on try again...
Click to expand...
Click to collapse
Yup, but that one: "Most likely, the firmware was removed from the server".
The other ones with B370 are both telling "The firmware is not approved for installation".
I'm testing all the FullOTA-MF-PV's, they are all telling "The firmware is not approved for installation". Some of the "FullOTA-MF" do show the message that they are available. What's the difference between the "-PV"?

JorenVos said:
Yup, but that one: "Most likely, the firmware was removed from the server".
The other ones with B370 are both telling "The firmware is not approved for installation".
I'm testing all the FullOTA-MF-PV's, they are all telling "The firmware is not approved for installation". Some of the "FullOTA-MF" do show the message that they are available. What's the difference between the "-PV"?
Click to expand...
Click to collapse
That version is used to upgrade to android 7 from 6.
Maybe the version you updated before (B226/B228) don't allow you to upgrade.
Downgrade to B160 and redo your steps..
How to do this ?
Download THIS FILE, extract update.app, create a folder and name it DLOAD.
Put update.app into that folder and put the folder into your SD card.
Turn off the device then reboot holding vol+ & vol- & power buttons together
until flashing starts then release them...

Dadditz said:
That version is used to upgrade to android 7 from 6.
Maybe the version you updated before (B226/B228) don't allow you to upgrade.
Downgrade to B160 and redo your steps..
How to do this ?
Download THIS FILE, extract update.app, create a folder and name it DLOAD.
Put update.app into that folder and put the folder into your SD card.
Turn off the device then reboot holding vol+ & vol- & power buttons together
until flashing starts then release them...
Click to expand...
Click to collapse
Done, thanks for those clear instructions, I do have B160 for now. The B370 is still resulting in "The firmware is not approved for installation"... :/

JorenVos said:
Done, thanks for those clear instructions, I do have B160 for now. The B370 is still resulting in "The firmware is not approved for installation"... :/
Click to expand...
Click to collapse
That's really weird dude..
Is your device dual sim one ?
What happen if you choose B371 (fullota-mf-pv) instead of B370 ?

Dadditz said:
That's really weird dude..
Is your device dual sim one ?
What happen if you choose B371 (fullota-mf-pv) instead of B370 ?
Click to expand...
Click to collapse
Yup, the device is the dual sim one, B371 also "The firmware is not approved for installation". It's really weird...
I'll try updating manually incrementally, so update by update the ones with G 1258 - g 104?

JorenVos said:
Yup, the device is the dual sim one, B371 also "The firmware is not approved for installation". It's really weird...
I'll try updating manually incrementally, so update by update the ones with G 1258 - g 104?
Click to expand...
Click to collapse
Back to B370,
skip the verify access firmware, go directly to 'get an update via dns',
tap ok, select 'auto' dns method and tap change dns.
VPN service should start...
Open settings > internal updater
and see if download come for you... check several times ...

Dadditz said:
Are you choosing B370 fullota-mf-pv one ? (not B370 fullota-mf nor B370 ota)
Also now i see there a third B370 fullota-mf-pv with date 2017.08.03 - G 1258 - g 104..
If you don't upgrade to this version first,
you couldn't upgrade anyway to android 7
and then to latest version.
Come on try again...
Click to expand...
Click to collapse
I don't know what's wrong with this device.
I've downgraded my device to B160 (66015), tried upgrading to B370 80460, 80466, 80582, all with the same result: Incompatibility with current version. The only version I'm able to upgrade to is 80562, which is B210. From that point, Firmware Finder suggests that it should be possible to update to the B370 builds, but every time, "Incompatibility with current version".
The only B370 that I was not able to try is the one you're suggesting in your comment. That one gives a 404 so I'm not able to download that one (92405). Any other suggestions...?

JorenVos said:
I don't know what's wrong with this device.
I've downgraded my device to B160 (66015), tried upgrading to B370 80460, 80466, 80582, all with the same result: Incompatibility with current version. The only version I'm able to upgrade to is 80562, which is B210. From that point, Firmware Finder suggests that it should be possible to update to the B370 builds, but every time, "Incompatibility with current version".
The only B370 that I was not able to try is the one you're suggesting in your comment. That one gives a 404 so I'm not able to download that one (92405). Any other suggestions...?
Click to expand...
Click to collapse
Sorry dude have you tried skipping the firmware access ?
Could we have missed something in the procedure ?
If this doesn't work, try opening the FF app and from the main menu select 'instructions'.
Video and text guides will open. You can try the update with HiSuite
or with eRecovery or as a last resort you could try the one with a TWRP,
but for this you will have to unlock the bootloader and
it would cost you some time and an additional 4 € ...
Please Note: I have never upgraded from A6 to A7 with this device via twrp,
you do this at your own risk ...

JorenVos said:
I don't know what's wrong with this device.
I've downgraded my device to B160 (66015), tried upgrading to B370 80460, 80466, 80582, all with the same result: Incompatibility with current version. The only version I'm able to upgrade to is 80562, which is B210. From that point, Firmware Finder suggests that it should be possible to update to the B370 builds, but every time, "Incompatibility with current version".
The only B370 that I was not able to try is the one you're suggesting in your comment. That one gives a 404 so I'm not able to download that one (92405). Any other suggestions...?
Click to expand...
Click to collapse
With B160, install firmware finder on your phone.
Add model as VNS-L31C432
Settings > Show firmware for this region only and Show full OTAs only.
Check firmware approval one or two times. (Make sure you've provided phone permission for firmware finder)
Get an update via DNS and it'll turn on vpn.
Check for updates and download.
I can help you on teamviewer if you still can't make it work.

I think that the firmware I need is the one that returns a 404 when trying to download. I've already done successful firmware approval several times for builds that won't install after all. Only the fact that it's such a mess to get updates for this device makes me really frustrated. What if I was a "dummy" owner of this device? I should never be able to get the updates I'm looking for. It's just impossible without doing too much effort or rooting the device. For me it's really important to have the original firmware of Huawei and not a custom rom, because I have to investigate the issue of my app user, which is device-specific. How complicated can it be to provide a solid update platform. Huawei, please.
I've decided to ship this piece of sh*t back to Amazon. Ordered a second hand Huawei P9 Lite that has already the build VNS-L31C432B418. Thank you guys for all the effort in trying to help me getting Nougat on this device, unfortunately it seems to be impossible.