Related
Hello,
Trying to install latest PA 'pa_i9300-5.1-20150528.zip' on Galaxy S3 i9300 using TWRP 2.8.6.1.
Zip installs faster, shows no error.
I select the reboot option, it reboots and sits on PA loading logo
I have been using CM12.1 by JustArchi for some time, thought of giving PA a try.
same here, Im also flashing with TWRP2.8.6.1
The pa_i9300-5.1-20150520 version runs well. But the pa_i9300-5.1-20150528 doesnt. It goes directly to TWRP.
wipe, format, factory reset, redownload rom, reflash,.... dont solve.
The same happens when upgrading from Paranoid_OTA app =/
Same here.
But i'm surprised, you say the pa_i9300-5.1-20150520 run well on your I9300 ?
Can you tell me how you managed to make it work ?
I tried a full swipe then install, didn't had any luck, tried differents gapps with no success.
Can you tell me wich Gapps you use please ?
I had tried 'pa_i9300-5.1-20150520.zip' also, it showed the same behavior.
I don't flash gapps on the first go, I boot with just the rom and later reboot into recovery and load all the zips.
mackhdo said:
But i'm surprised, you say the pa_i9300-5.1-20150520 run well on your I9300 ?
Can you tell me how you managed to make it work ?
I tried a full swipe then install, didn't had any luck, tried differents gapps with no success.
Can you tell me wich Gapps you use please ?
Click to expand...
Click to collapse
I ve just followed a tutorial on the internet.
Boot into TWRP, Format, Wipe Cache/Dalvik/System, Install PA, Install GApps, Wipe Cache/Dalvik, and reboot.
And mine is the 5.1.x mini package from there: http://forum.xda-developers.com/paranoid-android/general/5-1-x-5-0-x-4-4-x-pa-gapps-mirror-t3069879
Unable to BOOT
I did a clean installation of PA 5.1 dated 12/6/15. Gapps did well too. Phone reboots and enters CWM again.. did multiple times but it always jumps to CWM. Any guidance Senior Members.
Pretty sure you have to flash a kernel
naveed8695 said:
I did a clean installation of PA 5.1 dated 12/6/15. Gapps did well too. Phone reboots and enters CWM again.. did multiple times but it always jumps to CWM. Any guidance Senior Members.
Click to expand...
Click to collapse
Having exactly the same problem. I can only get the original 5.1 ROM from may to work, but none of the updates. Tried formatting system, cache, dalvik and even tried flashing the boot.img inside the zip file. No luck ?.
YanN509 said:
Having exactly the same problem. I can only get the original 5.1 ROM from may to work, but none of the updates. Tried formatting system, cache, dalvik and even tried flashing the boot.img inside the zip file. No luck ?.
Click to expand...
Click to collapse
You need to flash a different kernel. The boot.img that ships with the rom keeps getting bored during the build it would appear.
This is covered extensively in the g+ community
Pirateghost said:
You need to flash a different kernel. The boot.img that ships with the rom keeps getting bored during the build it would appear.
This is covered extensively in the g+ community
Click to expand...
Click to collapse
Thank you for the advice. :good:
It worked with Boeffla Kernel 12.1 alpha 3 (but the latest ones did not)
pa_i9300-5.1-20150520.zip works!
texmty said:
same here, Im also flashing with TWRP2.8.6.1
The pa_i9300-5.1-20150520 version runs well. But the pa_i9300-5.1-20150528 doesnt. It goes directly to TWRP.
wipe, format, factory reset, redownload rom, reflash,.... dont solve.
The same happens when upgrading from Paranoid_OTA app =/
Click to expand...
Click to collapse
pa_i9300-5.1-20150520.zip works indeed after wipe: dalvik, cache, data, system. then format.
when it successfully boots, restart into recovery and make backup of only "boot" to external_sd.
then format again and factory reset, then install latest zip (pa_i9300-5.1-20150704.zip).
before reboot first restore "boot" from backup.
Tequila4alvin said:
pa_i9300-5.1-20150520.zip works indeed after wipe: dalvik, cache, data, system. then format.
when it successfully boots, restart into recovery and make backup of only "boot" to external_sd.
then format again and factory reset, then install latest zip (pa_i9300-5.1-20150704.zip).
before reboot first restore "boot" from backup.
Click to expand...
Click to collapse
That worked for me too
Hi, i have on my N7-2012 TWRP 3.0.2.
I did Advanced Wipe for all partitions, and Format Data. I changed /data and /cache to f2fs and flashed a Nougat ROM from this form (DirtyUnicorn) I had no troubles.
I wiped system again (to avoid space problems during the flash of Gapps) and tried to flash GApps 'open_gapps_arm7.0-micro-20161018.zip', but i got this error:
*** Incompatible Android ROM detected ***
This GApp pkg is for Android 7.0.x ONLY
Please download the correct version for
your ROM: 5.1.1 (SDK 22)
*** GApps intallation failed ***
- Copying log to /usb-otg/Nexus 7 Asus
- NO changes were made to your device
Install will now exit...
Error code: 20
- Unmounting
I tried with other nougat ROM such as Carbon but i got the same error. The weirdness is that i tried also with a MM rom, and tried to flash GApps for MM... again, same error! He ask for a 5.1.1 GApps! So strange.
So, only for my curiosity, i reflashed DU ROm, downloaded and flashed GApps for 5.1.1. First time, i got the error:
*** Incompatible Android ROM detected ***
This GApp pkg is for Android 5.1.1 ONLY
Please download the correct version for
your ROM: 7.0.0 (SDK 22)
*** GApps intallation failed ***
i tried again and flash worked, i rebooted the device and..... bootloop... obviously.
Can you help me?
UPDATE: i forget to say that i tried also with: nano and pico gapps, and Banks Gapps. Same problem. if i reboot the device without gapps the rom work but if i download apk play store and install it doesn't work when i open it.
pls, noone can help me? :crying:
qwerweteryu said:
Hi, i have on my N7-2012 TWRP 3.0.2.
I did Advanced Wipe for all partitions, and Format Data. I changed /data and /cache to f2fs and flashed a Nougat ROM from this form (DirtyUnicorn) I had no troubles.
I wiped system again (to avoid space problems during the flash of Gapps) and tried to flash GApps 'open_gapps_arm7.0-micro-20161018.zip', but i got this error:
Click to expand...
Click to collapse
Are you wiping "system" after installing the ROM? If so, you are effectively removing the ROM you just installed which leaves the GAPPS script nothing to detect to install. The proper install would be: Flash ROM and the Flash Gapps (usually pico or nano to save space) and then reboot, no wiping in between.
I had this issue no matter what rom I tried after flashing an android 7.0 rom. I just did a factory reset by flashing back to a factory image now everything seems fine and google apps are working again.
I followed this guide http://forum.xda-developers.com/showthread.php?t=1907796 but used kit kat 4.4.4 image and didn't lock the boot loader. Then flash the recovery of your choice again and your good to go.
jbaumert said:
Are you wiping "system" after installing the ROM? If so, you are effectively removing the ROM you just installed which leaves the GAPPS script nothing to detect to install. The proper install would be: Flash ROM and the Flash Gapps (usually pico or nano to save space) and then reboot, no wiping in between.
Click to expand...
Click to collapse
Yes i wiped /system cause after the flash of the ROM when i try to install GApps i get error "not enough space". I followed the tips of a xda GUIDE wiping /system
@dinotyped: Are you telling me that there's no way to have Nougat on my N7? :crying::crying:
@qwerweteryu You should be able to use Nougat roms ok. I've not tried again. I'll likely stick to marshmallow for the time being just because of personal preference.
qwerweteryu said:
Yes i wiped /system cause after the flash of the ROM when i try to install GApps i get error "not enough space". I followed the tips of a xda GUIDE wiping /system
@dinotyped: Are you telling me that there's no way to have Nougat on my N7? :crying::crying:
Click to expand...
Click to collapse
Stick with "Pico" (or possibly) "Nano" Gapps to make sure you have enough space after flashing the ROM. You can always go back after booting / setting up and install the other Google Apps that you want.
jbaumert said:
Stick with "Pico" (or possibly) "Nano" Gapps to make sure you have enough space after flashing the ROM. You can always go back after booting / setting up and install the other Google Apps that you want.
Click to expand...
Click to collapse
omg! I did it! Thanks a lot!!
i'm on a g900f and every Nougat rom i've installed(RR, CM/LOS, CRDroid) , it just freezes and puts my into a bootloop. BUT, this only happens when i flash gApps (2/02/17 7.1.1 nano)
I'm now back on CM13 and i just hope Android 8 will work properly.
anyone know how to fix?
nialloshea said:
i'm on a g900f and every Nougat rom i've installed(RR, CM/LOS, CRDroid) , it just freezes and puts my into a bootloop. BUT, this only happens when i flash gApps (2/02/17 7.1.1 nano)
I'm now back on CM13 and i just hope Android 8 will work properly.
anyone know how to fix?
I had same issue took 2 days to discover gapps was doing it. Boot into recovery, wipe Data,System,Cache, Delvik Cache. Install whatever Version Nougat 7.1.1 rom. Install Mini_Dynamic_GApps-7.1.x-20170121.zip. (Find download link on xda or Google it.) Do factory reset and reboot. I never had any problems after that. Once i put all my apps back anf settings, it was like it never happened. Good luck.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
-Flash rom
-Flash latest opengapps
-Flash su if u need it
-Flash this fix ( https://www.androidfilehost.com/?w=files&flid=150763 )
-Done enjoy....
for the next lineage build all freezes in setup has been fixed
So if you cant wait for the next build just flash the fix file..
Flash img?
Hi
I am using custom roms since a while and I also got into this freezing problem. Now I see this .img here. Just that I don't do anything wrong. How to flash and .img? Need Odin or is it possible in recovery mode? Sorry for the numb question here but could not find an answer hot to do on my Galaxy S5
Heyy,
as i had some problems with my g2 i had to flash stock rom kitkat 4.4.2.
I rooted with ioroot, downloaded lineage and gapps files, flashed custom recovery with autorec but if i then go to twrp and install lineage os and gapps, i always get "your device does not appear to have root. do u want to install supersu?", althoug ive checked root with "root checker" before... i cant find the mistake
I WANT LINEAGE OS
Quicka said:
Heyy,
as i had some problems with my g2 i had to flash stock rom kitkat 4.4.2.
I rooted with ioroot, downloaded lineage and gapps files, flashed custom recovery with autorec but if i then go to twrp and install lineage os and gapps, i always get "your device does not appear to have root. do u want to install supersu?", althoug ive checked root with "root checker" before... i cant find the mistake
I WANT LINEAGE OS
Click to expand...
Click to collapse
Autorec is just the first step to twrp. Go to https://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705 and get the bumped version 3.1.0-1.
Then put it in your phones memory, boot into twrp you got from autorec and flash the new version.
Jan Philipp said:
Autorec is just the first step to twrp. Go to https://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705 and get the bumped version 3.1.0-1.
Then put it in your phones memory, boot into twrp you got from autorec and flash the new version.
Click to expand...
Click to collapse
i have done it... but after i wiped data,... etc. flashed lineage os and gapps and reboot system, phone screen gets black... and i can only go to download mode to flash again stock rom ive tried it about 5 times
Problem fixed
problem fixed: flashed lollipop firmware, then rooted with LGoneClickRoot and installed TWRP with autorec
Quicka said:
problem fixed: flashed lollipop firmware, then rooted with LGoneClickRoot and installed TWRP with autorec
Click to expand...
Click to collapse
How did you flashed your phone? Your display have been black and you haven't seen anything. How did you entered into download mode?
djsasha78 said:
How did you flashed your phone? Your display have been black and you haven't seen anything. How did you entered into download mode?
Click to expand...
Click to collapse
just held the volume up button and then connected with pc. then using lg flash tool to flash lollipop stock rom
1. Root + TWRP : https://www.dropbox.com/s/2shvozzbu29xjfu/LGG2-D802-OneClickRootRecoveryV1.1.zip?dl=0
2. Update TWRP to 3.1 by flashing zip file and then rebooting recovery: http://www.gregtwallace.com/lgg2-projects/twrp/?version=3.1.0-1
3. LineageOS by flashing rom zip file and gapps: https://download.lineageos.org/d802 + http://opengapps.org/ (ARM + Android 7.1)
easiest method to flash lineageOS on LG G2 https://www.youtube.com/watch?v=BoPjGM0nrak (Video tutorial)
Hi,
It seems I have the same issue :
I tried to install LineAge, using TWRP 3.2.1 (from CM12.1), but nothing is working (I tried 20180425 and 20180404 nightly versions). After reboot I can see the backlight on the lcd screen but nothing else. Then I tested the installation of a CM12 version, all is right, normal boot. No error message written in the console. i tried also a CM13 install, same as Lineage.
Do you think I have to flask back to LG "OS" ?
JackSparreau said:
Hi,
It seems I have the same issue :
I tried to install LineAge, using TWRP 3.2.1 (from CM12.1), but nothing is working (I tried 20180425 and 20180404 nightly versions). After reboot I can see the backlight on the lcd screen but nothing else. Then I tested the installation of a CM12 version, all is right, normal boot. No error message written in the console. i tried also a CM13 install, same as Lineage.
Do you think I have to flask back to LG "OS" ?
Click to expand...
Click to collapse
Are you clean flashing? Make sure to factory reset, wipe system, data and cache before flash. Never wipe internal storage. Swipe factory reset again after flash. Try flashing gapps later after confirming that Rom boots fine.
cropsroth said:
Are you clean flashing? Make sure to factory reset, wipe system, data and cache before flash. Never wipe internal storage. Swipe factory reset again after flash. Try flashing gapps later after confirming that Rom boots fine.
Click to expand...
Click to collapse
Hi,
yes I wiped Dalvik, system, data & cache through TWRP, before flash. But I don't wipe after, I rebooted without GApps...
Maybe, because I read that somewhere, I need to flash a bootstack. I don't know when I have to di it, if I have to do.
Thanks
JackSparreau said:
Hi,
yes I wiped Dalvik, system, data & cache through TWRP, before flash. But I don't wipe after, I rebooted without GApps...
Maybe, because I read that somewhere, I need to flash a bootstack. I don't know when I have to di it, if I have to do.
Thanks
Click to expand...
Click to collapse
Yes, you don't wipe after flash, but you swipe the factory reset, it does not wipe but resets the flashed Rom. Give it a clean shot again. Check MD5 of the all files you downloaded with original MD5 to confirm the file didn't get corrupt.
Boot stack flash not needed. Please read the first post thoroughly in lineage thread
"""
Requirements:
Custom recovery (TWRP or any other)
KitKat (KK) bootloader (included in the lg-devs LP bootstack)
KitKat (KK) bootstack minimum; Please read the entire FAQ for important bootstack information. Installation of bootstacks is NOT recommended.
Clean flash if coming from another ROM or CM 13 (no dirty flash, wipe system too check you bootstack(needen bump support)
"""
crophs said:
... but you swipe the factory reset, it does not wipe but resets the flashed Rom. Give it a clean shot again. ...
Click to expand...
Click to collapse
Hi,
what do you mean by "you swipe the factory reset", I'm not sure what it is, either "give it a clean shot again".
Sorry I'm not very aware of all those processes ^_^, and I'm french so not very aware of some vocabulary words
Thank you
I recently flashed my ROM to Resurrection remix named RR-N-v5.8.5-20170925-a6000-Final and installed gapps named open_gapps-arm-6.0-stock-20171022 then I installed some apps from play store. SOme apps like Backdrops after installation makes my phone to restart and whet it boots up it shows "google has stopped responding " also "process system is not responding" and then is restarts again. I tried reflashing several times but nothing seems to work.
1. Wipe Art/cache system, data, internal
2. Install HEX Firmware
3. Install 5.8.5 RR
4. Install arm 7.1 pico gapps
5. wipe cache and reboot.
Rom take some time to Battery Collaboration and Performance.
so keep patience and enjoy.
rkunaal said:
1. Wipe Art/cache system, data, internal
2. Install HEX Firmware
3. Install 5.8.5 RR
4. Install arm 7.1 pico gapps
5. wipe cache and reboot.
Rom take some time to Battery Collaboration and Performance.
so keep patience and enjoy.
Click to expand...
Click to collapse
How can I install the firmware?
The link of hex firmware is in RR thread. And you flashed marshmallow gapps on a nougat rom. Flash arm 7.1 gapps.
ameyab97 said:
The link of hex firmware is in RR thread. And you flashed marshmallow gapps on a nougat rom. Flash arm 7.1 gapps.
Click to expand...
Click to collapse
Still the same problem
I think the problem is with new playstore every time I download certain apps it crashes.
raunak51299 said:
How can I install the firmware?
Click to expand...
Click to collapse
http://berbagikoleksi.blogspot.in/2015/06/solusi-lenovo-a6000-bootloop-gagal-flash.html?m=1
Sent from my Redmi Note 4 using Tapatalk
raunak51299 said:
I recently flashed my ROM to Resurrection remix named RR-N-v5.8.5-20170925-a6000-Final and installed gapps named open_gapps-arm-6.0-stock-20171022 then I installed some apps from play store. SOme apps like Backdrops after installation makes my phone to restart and whet it boots up it shows "google has stopped responding " also "process system is not responding" and then is restarts again. I tried reflashing several times but nothing seems to work.
Click to expand...
Click to collapse
First, I would like you to know that you DID NOT follow the instructions correctly. INSTRUCTIONS said, you will flash Opengapps 7.1.X ARM not 6.0 Marshmallow. Links were already given but still you did not follow.
Download the correct gapps package - ARM > 7.1 > Pico.
Code:
http://opengapps.org
Dirty flash it but if there's still an issue, you can clean install your RR 5.8.5 Final again and flash the gapps 7.1.
Good luck!