Well my journey started because i wanted to install the latest stock nougat on my device "7.1.1" and i had bad boyz rom installed on my device so the update wasn't showing up so i follow this this THREAD and i downloaded all the tools needed in order to flash my device so when i tried it at first it showed me a bad format error "HERE'S THE PIC" after that error i unpluged my phone off the pc and tried to turn it on but i had no luck and now it's stuck in a black screen and every time i plugged it in to my pc it shows up as qloader 9008 but apparently miflash cannot flash it or any other tooland it says it cannot retrive the hello packet "HERE'S THE PIC", my bootloader was unlocked and the device was also root, i also tried calling their RMA but they didn't do much since my bootloader was unlocked :C
I couldn't make the youtube thinggy work lol but here's the link in case you guys wanna know what's going on with my piece of brick lol
https://www.youtube.com/watch?v=xX8_RgSS5x0
J0nhy said:
Well my journey started because i wanted to install the latest stock nougat on my device "7.1.1" and i had bad boyz rom installed on my device so the update wasn't showing up so i follow this this THREAD and i downloaded all the tools needed in order to flash my device so when i tried it at first it showed me a bad format error "HERE'S THE PIC" after that error i unpluged my phone off the pc and tried to turn it on but i had no luck and now it's stuck in a black screen and every time i plugged it in to my pc it shows up as qloader 9008 but apparently miflash cannot flash it or any other tooland it says it cannot retrive the hello packet "HERE'S THE PIC", my bootloader was unlocked and the device was also root, i also tried calling their RMA but they didn't do much since my bootloader was unlocked :C
Click to expand...
Click to collapse
There are a whole bunch of problems with this version of MiFlash. Try this version: http://xiaomiflashtool.com/download/xiaomi-flash-tool-20160401
J0nhy said:
Well my journey started because i wanted to install the latest stock nougat on my device "7.1.1" and i had bad boyz rom installed on my device so the update wasn't showing up so i follow this this THREAD and i downloaded all the tools needed in order to flash my device so when i tried it at first it showed me a bad format error "HERE'S THE PIC" after that error i unpluged my phone off the pc and tried to turn it on but i had no luck and now it's stuck in a black screen and every time i plugged it in to my pc it shows up as qloader 9008 but apparently miflash cannot flash it or any other tooland it says it cannot retrive the hello packet "HERE'S THE PIC", my bootloader was unlocked and the device was also root, i also tried calling their RMA but they didn't do much since my bootloader was unlocked :C
Click to expand...
Click to collapse
Run into the same problem with "Miflash cannot read helloL". Here the fix:
Flash with the package: the "B15-NEW_FULL (Nougat)"
Still in the thread https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
bkores said:
There are a whole bunch of problems with this version of MiFlash. Try this version: http://xiaomiflashtool.com/download/xiaomi-flash-tool-20160401
Click to expand...
Click to collapse
Thanks man i tried that one too no luck :C
tamahouse02 said:
Run into the same problem with "Miflash cannot read helloL". Here the fix:
Flash with the package: the "B15-NEW_FULL (Nougat)"
Still in the thread https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
Click to expand...
Click to collapse
Yes man i tried it but i had no luck :C, thanks
Unzip and flash the file inside. Also you must reboot edl after any failed attempt.
J0nhy said:
Yes man i tried it but i had no luck :C, thanks
Click to expand...
Click to collapse
Use this driver
Restart - enter EDL again
Flash "B15-NEW_FULL (Nougat)" (the full one, not the twrp one)
lafester said:
Unzip and flash the file inside. Also you must reboot edl after any failed attempt.
Click to expand...
Click to collapse
Cannot turn off or on my device i cannot not do anything the only thing it does is a sound every time i plug it in to my pc
Keep trying. It is hard to tell with the black screen. Just watch device manager to see it reboot.
lafester said:
Keep trying. It is hard to tell with the black screen. Just watch device manager to see it reboot.
Click to expand...
Click to collapse
Hahahahaha got it working mate thanks, so i tried a samsung cable with the adapter and it worked lol thanks mate
tamahouse02 said:
Run into the same problem with "Miflash cannot read helloL". Here the fix:
Flash with the package: the "B15-NEW_FULL (Nougat)"
Still in the thread https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
Click to expand...
Click to collapse
Thanks. I kept getting partition type errors. The link you posted kept having network errors and dropping. It wasn't till after midnight pst that I got a stable connection and downloaded the whole thing. It flashed great and my phone is up and running. I was thinking I would have to send my phone in.
J0nhy said:
Hahahahaha got it working mate thanks, so i tried a samsung cable with the adapter and it worked lol thanks mate
Click to expand...
Click to collapse
Yeah that's the kind of errors that suck /real/ bad. Good on you for not giving up. Now you know and you'll help spread the gospel of "keep trying until you can prove that it's actually an issue".
Related
Hey all I'm looking for a little help on an issue that I can't seem to find any exact info on (I have searched quite a bit)
The problem is that I have seemingly soft bricked my G2 whilst trying to restore a 4.4.2 backup coming from a stock custom 5.0.1 Rom.
The phone is stuck in a bootloop and I cannot access recovery mode through any of the button combinations or any other way.
I have installed the latest LG drivers but when I connect the phone (while in boot loop) the pc tries to install "LGE Android MTP Device" but fails to complete.
When in download mode though, the phone is recognised as "LGE AndroidNet USB Modem"
When I try to flash a stock KDZ via Flashtool,every time it gets to 2% and then throws an error message telling me to retry.
If this is an issue with the drivers not installing correctly, is there another way of getting them to install without the phone being switched on and USB Debugging on?
If so I would greatly appreciate a little light shed on the matter.
As I said, I have searched a lot about this and did not find any other cases similar to mine where the USB drivers could not be installed.
Thanks
Darren
surfsyco said:
Hey all I'm looking for a little help on an issue that I can't seem to find any exact info on (I have searched quite a bit)
The problem is that I have seemingly soft bricked my G2 whilst trying to restore a 4.4.2 backup coming from a stock custom 5.0.1 Rom.
The phone is stuck in a bootloop and I cannot access recovery mode through any of the button combinations or any other way.
I have installed the latest LG drivers but when I connect the phone (while in boot loop) the pc tries to install "LGE Android MTP Device" but fails to complete.
When in download mode though, the phone is recognised as "LGE AndroidNet USB Modem"
When I try to flash a stock KDZ via Flashtool,every time it gets to 2% and then throws an error message telling me to retry.
If this is an issue with the drivers not installing correctly, is there another way of getting them to install without the phone being switched on and USB Debugging on?
If so I would greatly appreciate a little light shed on the matter.
As I said, I have searched a lot about this and did not find any other cases similar to mine where the USB drivers could not be installed.
Thanks
Darren
Click to expand...
Click to collapse
Have you tried flashing a .TOT file using the .TOT method instead of .KDZ? What is your phones model?
http://downloads.codefi.re/autoprime/LG/LG_G2/
It's a D802. And no I haven't tried that although I am intrigued as to what it entails. Is it the same procedure as KDZ flashing?
I really appreciate are the reply btw
surfsyco said:
It's a D802. And no I haven't tried that although I am intrigued as to what it entails. Is it the same procedure as KDZ flashing?
I really appreciate are the reply btw
Click to expand...
Click to collapse
No worries. You'll find the TOT method here. Scroll down a little.
Make sure you quote my reply next time as I only get notified of your response when you quote mine.
surfsyco said:
It's a D802. And no I haven't tried that although I am intrigued as to what it entails. Is it the same procedure as KDZ flashing?
I really appreciate are the reply btw
Click to expand...
Click to collapse
If your having trouble with the drivers then delete them, reboot and install pdanet. If it still fails at 2% then go the tot method.
d00lz said:
No worries. You'll find the TOT method here. Scroll down a little.
Make sure you quote my reply next time as I only get notified of your response when you quote mine.
Click to expand...
Click to collapse
Yeah will do mate lol.
I am at work at the minute but I will get a wee look see at it later.
Again mate, thanks for taking the time to reply.
Darren
d00lz said:
No worries. You'll find the TOT method here. Scroll down a little.
Make sure you quote my reply next time as I only get notified of your response when you quote mine.
Click to expand...
Click to collapse
Art Vanderlay said:
If your having trouble with the drivers then delete them, reboot and install pdanet. If it still fails at 2% then go the tot method.
Click to expand...
Click to collapse
Yeah I will definitely give this a go when I get home later.
Thanks for the reply.
Darren
d00lz said:
No worries. You'll find the TOT method here. Scroll down a little.
Make sure you quote my reply next time as I only get notified of your response when you quote mine.
Click to expand...
Click to collapse
Just wanted to thank you mate, that method worked great and I now have my beloved G2 back up and running again.
I really appreciate the help and info.
Cheers buddy.
Darren
Hello guys, I noticed this morning that MM was officially released today. I followed the steps on to update my phone. I downloaded the rom for 551ml put it on my root of my internal storage, after that a pop up showed that there was a system update. I did the update and now my phone wont turn on now. It vibes twice and nothing comes on the screen. I have no idea how to fix it. I was on the latest firmware that system update would give me (184). If someone isn't busy could they possibly help me out. thx..
Same issue here, have you found a solution yet?
arturocr said:
Same issue here, have you found a solution yet?
Click to expand...
Click to collapse
tyring a guide atm but links seem to be outdated. I managed to get in fastboot or whatever its called when you can boot in to recovery. but from there I cant do anything.
You cant get into recovery after fastboot?
Sent from my ASUS_Z00AD using XDA Premium HD app
same problem ,
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.
Same for me...
baonxxx said:
same problem ,
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.
Click to expand...
Click to collapse
I think mm system.img boot.img splashcreen.img need mm bootloder to run and at the moment twrp doesnt work with it, if you install mm via twrp you only updating these img and bootloader still lp that causes your phone cant boot. (Correct me if im wrong)
So now you need xfstk downloader to recover your fastboot and then flash .194 raw firmware using asus flash tool then adb sideload mm firmware from stock .194 recovery, theres guide how to do that in here but im forget where
Sorry my english are bad too..
miku1024 said:
I think mm system.img boot.img splashcreen.img need mm bootloder to run and at the moment twrp doesnt work with it, if you install mm via twrp you only updating these img and bootloader still lp that causes your phone cant boot. (Correct me if im wrong)
So now you need xfstk downloader to recover your fastboot and then flash .194 raw firmware using asus flash tool then adb sideload mm firmware from stock .194 recovery, theres guide how to to that in here but im forget where
Sorry my english are bad too..
Click to expand...
Click to collapse
how does make xfstk work ? don't have idea how. it just show nothing after i open xfstk , have a reference link ?
baonxxx said:
same problem ,
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.
Click to expand...
Click to collapse
baonxxx said:
how does make xfstk work ? don't have idea how. it just show nothing after i open xfstk , have a reference link ?
Click to expand...
Click to collapse
I found the link!
You need You need asus usb and intel soc drivers
Heres
http://forum.xda-developers.com/zenfone2/general/guide-fix-bricked-ze550ml-ze551ml-usb-t3405840
Try this: http://forum.xda-developers.com/zenfone2/general/guide-how-to-update-to-official-mm-t3452082
miku1024 said:
I think mm system.img boot.img splashcreen.img need mm bootloder to run and at the moment twrp doesnt work with it, if you install mm via twrp you only updating these img and bootloader still lp that causes your phone cant boot. (Correct me if im wrong)
So now you need xfstk downloader to recover your fastboot and then flash .194 raw firmware using asus flash tool then adb sideload mm firmware from stock .194 recovery, theres guide how to do that in here but im forget where
Sorry my english are bad too..
Click to expand...
Click to collapse
I used XFSTK to upload firmware etc... but after upload firmware, the phone will vibrate twice and download of OS will not start... the soft will try 20 attemps to connect with the phone and the OS part can't be download on the phone... I'm stick at this point.
Hello guys, i'm trying to unbrick my phone, i'm following this guide http://forum.xda-developers.com/zenf...l-usb-t3405840 but when i get to the end of te install of intelSoC my device is detected as Moorefield for like 4-5 seconds and then it disappears. I've been trying to solve this for like 4 hours now, a little help would be much appreciated.
quarterbreed said:
tyring a guide atm but links seem to be outdated. I managed to get in fastboot or whatever its called when you can boot in to recovery. but from there I cant do anything.
Click to expand...
Click to collapse
try this if you unable to flash
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
sukhwant717 said:
try this if you unable to flash
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Click to expand...
Click to collapse
I did this morning and it worked. Im on 6.0.1 now, I guess the cause of my brick was that I had TWRP installed. Now I know next time to remove it before updating lol.
quarterbreed said:
I did this morning and it worked. Im on 6.0.1 now, I guess the cause of my brick was that I had TWRP installed. Now I know next time to remove it before updating lol.
Click to expand...
Click to collapse
glad to know that it worked. but sad to know that despite that you didn't hit thanks
quarterbreed said:
I did this morning and it worked. Im on 6.0.1 now, I guess the cause of my brick was that I had TWRP installed. Now I know next time to remove it before updating lol.
Click to expand...
Click to collapse
If you don't need to use twrp everyday (maybe just a backup from time to time) you'd better keep stock recovery and whenever you need something from twrp, you just boot into it without flashing with the usual "fastboot boot twrp.img" command. That way if you ever upgrade again you don't have to remember whether you removed twrp before. But that's just an opinion, since if done that way, you'd need to have yor phione hooked to a computer to get into twrp, an that's not always possible.
thanks
quarterbreed said:
I did this morning and it worked. Im on 6.0.1 now, I guess the cause of my brick was that I had TWRP installed. Now I know next time to remove it before updating lol.
Click to expand...
Click to collapse
sukhwant717 said:
try this if you unable to flash
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Click to expand...
Click to collapse
that link saved my phone, thanks man
sukhwant717 said:
glad to know that it worked. but sad to know that despite that you didn't hit thanks
Click to expand...
Click to collapse
I just hit thanks now, I was at my limit of 8 at the time.
Discussion on problems faced by Miflash tool.
*So when used for the first time I was able to unlock phone without any problem.
*But after that when I used it for second time to unbrick my phone I was constantly getting errors like not enough memory,some errors like x800000 blah blah...
*I almost went through every solutions mentioned in miui forum and XDA...But I was unable to get it working...
So if anyone faced any problem like that comment your problem below..
Aftef a lot of research I was able to find a solution for that..
Hopefully it will be shared with you all as soon as possible. I have to finish touching up some final things..
As soon as I finish the work I will be releasing alpha version..
Will update the thread when I release it
Waiting for the solution.
https://chat.whatsapp.com/H3jQvVgU5MZCRrlOFqSlIG
My Redmi Note 3 Qualcomm Whatsapp Group
Murshad007 said:
Waiting for the solution.
https://chat.whatsapp.com/H3jQvVgU5MZCRrlOFqSlIG
My Redmi Note 3 Qualcomm Whatsapp Group
Click to expand...
Click to collapse
Hopefully I was able to make alpha version of the software...worked fine for me on fastboot mode..want some testers
Edit..was able to boot up successfully..once confirmed by some testers I will release stable one
I experienced that "Not enough memory" thing. What I did was I used the latest MiFlash tool (restarted my PC first).
exce1ia said:
I experienced that "Not enough memory" thing. What I did was I used the latest MiFlash tool (restarted my PC first).
Click to expand...
Click to collapse
Yeah I faced it many time...not enough memory, buffer size0000 error blah blah blah...hopefully I was able to develop an app for to unbrick via fastboot... tried by me 2 times worked smooth but need some testers
Mi Flash & Nougat
Hi, if you want I'm ready to test your alpha version!
I have a dead Mi5 Pro (updated to xiaomi.eu Nougat rom) that my pc only reads as Qualcomm_9008.
I already tried many many posted potential solutions but my phone is still dead!
At this point, I HOPE that the problem is that latest MiFlash (30.aug.2016) is not so compatible with Nougat and I can't flash any ROM!
Waiting for your news!
Thank you very much
cleo1986 said:
Hi, if you want I'm ready to test your alpha version!
I have a dead Mi5 Pro (updated to xiaomi.eu Nougat rom) that my pc only reads as Qualcomm_9008.
I already tried many many posted potential solutions but my phone is still dead!
At this point, I HOPE that the problem is that latest MiFlash (30.aug.2016) is not so compatible with Nougat and I can't flash any ROM!
Waiting for your news!
Thank you very much
Click to expand...
Click to collapse
https://forum.xda-developers.com/redmi-note-3/development/mi-fastboot-unbrick-tool-2-0-t3538614
Already released...
Edit use manual method..
No fastboot
adithyan25 said:
https://forum.xda-developers.com/redmi-note-3/development/mi-fastboot-unbrick-tool-2-0-t3538614
Already released...
Edit use manual method..
Click to expand...
Click to collapse
Thanks mate, but NOWAY to Fastboot here! My Mi5 is completely dead and I think in EDL because my pc can recognize it as Qualcomm device.
cleo1986 said:
Thanks mate, but NOWAY to Fastboot here! My Mi5 is completely dead and I think in EDL because my pc can
recognize it as Qualcomm device.
Click to expand...
Click to collapse
Try pressing vol down+pwr... If you see light blinking while connected to PC,that means you are in edl..
We are working on a tool that can flash through edl, the last tool was for fastboot unbrick...
In order to make sure you are in edl.connect phone to PC,open miflashtool and click refers..
If it shows something like COMXX (XX will be num) its in edl..u can flash stock rom via flashtool then
Already TRIED
adithyan25 said:
Try pressing vol down+pwr... If you see light blinking while connected to PC,that means you are in edl..
We are working on a tool that can flash through edl, the last tool was for fastboot unbrick...
In order to make sure you are in edl.connect phone to PC,open miflashtool and click refers..
If it shows something like COMXX (XX will be num) its in edl..u can flash stock rom via flashtool then
Click to expand...
Click to collapse
I already tried many times to flash in EDL via miflash but I have error 0x000..., hello packet, etc etc
PLEASE LET ME KNOW WHEN YOU HAVE EDL Tool!
Thank you very much
Ok so I have managed to brick my device pretty good (recovery seems gone), but I can get to FASTBOOT, and from there, followed a guide to get to EDL..
So now I got the mi flash tool to flash the 7.25 image as described by this guide :
https://forum.xda-developers.com/redmi-note-3/how-to/unlock-bootloader-twrp-root-7-2-3-t3359492
No errors, but I don't think it worked because when the device reboots, it still can't seem to try and load a kernel (it goes black real quick). I am hoping it that the other unmentioned fields need populating etc..
Are there instructions on how to do a complete flash from EDL anywhere ?
Rapalax said:
Ok so I have managed to brick my device pretty good (recovery seems gone), but I can get to FASTBOOT, and from there, followed a guide to get to EDL..
So now I got the mi flash tool to flash the 7.25 image as described by this guide :
https://forum.xda-developers.com/redmi-note-3/how-to/unlock-bootloader-twrp-root-7-2-3-t3359492
No errors, but I don't think it worked because when the device reboots, it still can't seem to try and load a kernel (it goes black real quick). I am hoping it that the other unmentioned fields need populating etc..
Are there instructions on how to do a complete flash from EDL anywhere ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/redmi-note-3/how-to/fix-bootloop-redmi-note-3-recovery-edl-t3521297
This will work for a complete clean flash via edl
Yep.. I managed to do something similar with a newer FB ROM and the modded twrp so there is less chance to relock my BL.
Thanks for providing the post.. it makes me feel more comfortable knowing that this info is available in case I need it again
Hi, this is my first post on XDA. Excuse me if it isn´t very well made, Im writting this very quickly :c
I have an Axon7 (China version) and I flashed the U.S Version, however I lost my mobile network (ATT) signal and got a ¨No service¨text.
I flashed lineage OS to check if that would help me, flashed the universal bootloader and got it working, but I still had the no service error.
I decided to go back to stock nougat so I used Xiamiflash to try to flash the B19 firmware, it flashed succesfully but when I tried to turn it on I noticed my phone would get stock in Factory Test Mode, I flashed it succesfully but my phone wouln´t turn on, it gets stuck in a red Led and a black screen, i cant even get it to EDL mode :c
Please help.EDIT: I got my phone back on, I don´t know how, But I still have no service, I will create another Thread
Your PC see to device? BTW, don't flash us stock rom Via miflash tool. Just use twrp.
WesTD said:
Your PC see to device? BTW, don't flash us stock rom Via miflash tool. Just use twrp.
Click to expand...
Click to collapse
Yes, my pc now detects my phone in EDL, however I dont know wich package to flash , I can´t acces TWRP
Helacornio said:
Yes, my pc now detects my phone in EDL, however I dont know wich package to flash , I can´t acces TWRP
Click to expand...
Click to collapse
try this one
https://4pda.ru/forum/index.php?showtopic=814221&st=1080#entry62253492
WesTD said:
try this one
https://4pda.ru/forum/index.php?showtopic=814221&st=1080#entry62253492
Click to expand...
Click to collapse
Thank you for the help , It somehow restored but now I get a no service error :c I think it is because my EFS probably got corrupted :c
Helacornio said:
Thank you for the help , It somehow restored but now I get a no service error :c I think it is because my EFS probably got corrupted :c
Click to expand...
Click to collapse
There is no IMEI?
WesTD said:
There is no IMEI?
Click to expand...
Click to collapse
Exactly, I get a unkwnown imei error, however i still have my both imeis on my phone box, I dont know how to restore them
Helacornio said:
Exactly, I get a unkwnown imei error, however i still have my both imeis on my phone box, I dont know how to restore them
Click to expand...
Click to collapse
Do you have TWRP or can you?
WesTD said:
Do you have TWRP or can you?
Click to expand...
Click to collapse
I have TWRP Can I use it to restore my IMEI?
firstly try to flash B16 bootstack. check your imei. i don't anything else.
WesTD said:
firstly try to flash B16 bootstack. check your imei. i don't anything else.
Click to expand...
Click to collapse
it did not helped, I still get no signal :c
Helacornio said:
it did not helped, I still get no signal :c
Click to expand...
Click to collapse
Okay, try this guide
Follow it EXACTLY and you should get your IMEI back.
KwesiJnr said:
Okay, try this guide
Follow it EXACTLY and you should get your IMEI back.
Click to expand...
Click to collapse
TYSM But, how can i get the Qualcomm driver if I cant get it from Driver identifier :c.
Can you please send me the Qualcomm driver?
Helacornio said:
TYSM But, how can i get the Qualcomm driver if I cant get it from Driver identifier :c.
Can you please send me the Qualcomm driver?
Click to expand...
Click to collapse
Sure: https://www.androidfilehost.com/?fid=817550096634746189
All the best.
KwesiJnr said:
Sure: https://www.androidfilehost.com/?fid=817550096634746189
All the best.
Click to expand...
Click to collapse
I installed the drivers but my pc refuses to detect it :c
Helacornio said:
I installed the drivers but my pc refuses to detect it :c
Click to expand...
Click to collapse
You need to reboot your PC to Driver Enforcing mode if that happens.
Can you elaborate on what you mean by "refuses to detect it"?
KwesiJnr said:
You need to reboot your PC to Driver Enforcing mode if that happens.
Can you elaborate on what you mean by "refuses to detect it"?
Click to expand...
Click to collapse
It detects it but says that the device has no driver available.
It marks ZTE HSUSB Device but it says it has no driver installed
Helacornio said:
It detects it but says that the device has no driver available.
It marks ZTE HSUSB Device but it says it has no driver installed
Click to expand...
Click to collapse
OK, I got it to work, however , I cant get on my network :c
Helacornio said:
OK, I got it to work, however , I cant get on my network :c
Click to expand...
Click to collapse
Maybe it's time you tried a clean reset. The IMEI is unlikely to be wiped anymore...if you don't do anything drastic.
I would suggest you try MiFlash with the B19-NOUGAT_TWRP (Nougat 7.1.1) package from this thread, then flash the stock ROM afterward in TWRP.
Today i tried to update to oreo by LG Bidge. i've waited for 2 hours to download the 2.8G update files, then while updating it stopped saying retry, tried again and it stopped and had to do it all over. Now i'm stuck on fastboot screen and keep downloading this update for hours and getting the same errors whithout knowing the problem.
I 've tried to unlock but the OEM isn't enabled and there is no way to do it from fastboot.
Please help me i don't know what to do
Flash with LGUP and Uppercut.
Search the forum for the KDZ file.
Put phone in Download mode, load the KDZ file and flash.
basicreece said:
Flash with LGUP and Uppercut.
Search the forum for the KDZ file.
Put phone in Download mode, load the KDZ file and flash.
Click to expand...
Click to collapse
Thanks for your reply
I just updated the phone by another pc and it worked.
Thank you
jopanda said:
Thanks for your reply
I just updated the phone by another pc and it worked.
Thank you
Click to expand...
Click to collapse
Hi can you tell me what the difference between those two PCs was? I have the same problem right now.
Noxxit said:
Hi can you tell me what the difference between those two PCs was? I have the same problem right now.
Click to expand...
Click to collapse
Sorry but i don't know the difference just made an update to lg bridge then i updated the phone normally event if it took 3h to download the update
after that the phone installed the update and booted with the new oreo android
jopanda said:
Sorry but i don't know the difference just made an update to lg bridge then i updated the phone normally event if it took 3h to download the update
after that the phone installed the update and booted with the new oreo android
Click to expand...
Click to collapse
Thank you. Now I tried it on a third PC and replaced the USB cable with the original one. I don't know what part of that was the solution but it worked. Although I had to rerun the update as it was interrupted on the first procedure.