I have a possible root solution for the T818V/T818A aka the Verizon and ATT version of the T819 if any one is interested in giving it a go?
.
I'll try it out... I have the Verizon variation
Sent from my Pixel XL using Tapatalk
le0.br4zuc4 said:
I'll try it out... I have the Verizon variation
Click to expand...
Click to collapse
Could you post your firmware build number?
le0.br4zuc4 said:
I'll try it out... I have the Verizon variation
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Here we go. This is for T818VVRU1AQB1 firmware, but probably works on any revision 1 firmware.
Instructions
1. Enable OEM UNLOCK
In Settings>About>Software info tap the build number 7 times to enable developer options. Once you've enabled developer options, developer options will appear in settings just above the About device option. Open developer options, the 4th or 5th option should be “OEM Unlock”. Turn on.
2. Download the eng boot image.
This is a special boot image normally used by engineers, it allows selinux to be booted in permissive mode with relaxed root restrictions.
Do not replace this image with the stock image after rooting your device or you will possibly soft brick your device.
https://www.androidfilehost.com/?fid=529152257862710309
3. Install boot image:
Download Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the SM-T818V_eng_boot.tar to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Reboot
Check in Settings>About>Software, your device should be in Selinux permissive mode.
4. Install and run Kingroot:
Make sure you have an internet connection.
You may need to run Kingroot several times to gain successful root.
5. Install and run SuperSU me to remove Kingroot and convert to SuperSU (not required) :
https://play.google.com/store/apps/...ore&pcampaignid=APPU_1_uzPDVbGyFcGNyATHrqmoCA
6. Wifi fix:
modify the line below in /system/build.prop:
ro.securestorage.support=true to false
Good luck I hope it works for you. Let me know your outcome.
.
ashyx said:
Could you post your firmware build number?
Click to expand...
Click to collapse
AQA3
Sent from my SM-T818V using Tapatalk
le0.br4zuc4 said:
AQA3
Click to expand...
Click to collapse
You should be fine, let me know your results.
ashyx said:
You should be fine, let me know your results.
Click to expand...
Click to collapse
Will try it out soon
Sent from my SM-T818V using Tapatalk
There's been 10 downloads yet no one has come back with any reports?
ashyx said:
There's been 10 downloads yet no one has come back with any reports?
Click to expand...
Click to collapse
I have T818v on t818vvru1apj1
I could try but can't fine download link for the stock firmware for the restore purpose if anything goes wrong...
burattino said:
I have T818v on t818vvru1apj1
I could try but can't fine download link for the stock firmware for the restore purpose if anything goes wrong...
Click to expand...
Click to collapse
good idea.. I didn't think about that before...
Tablet won't boot up, just stays on the splash screen! I will try to find stock firmware to restore
le0.br4zuc4 said:
good idea.. I didn't think about that before...
Tablet won't boot up, just stays on the splash screen! I will try to find stock firmware to restore
Click to expand...
Click to collapse
The boot image flashed OK with odin? Which splash screen?
This could mean you need to wipe the data partition first for it boot.
I should be able to get the stock firmware for you sometime tomorrow.
ashyx said:
The boot image flashed OK with odin? Which splash screen?
This could mean you need to wipe the data partition first for it boot.
I should be able to get the stock firmware for you sometime tomorrow.
Click to expand...
Click to collapse
Flashed fine. It's the screen that says Android very big and had the tab model, right before it goes into the boot animation.
I'll wipe data partition and report back.
Please don't feel responsible for it, I'm about trying anything for rooting... I'm sure we'll get fixed
Sent from my Pixel XL using Tapatalk
le0.br4zuc4 said:
Flashed fine. It's the screen that says Android very big and had the tab model, right before it goes into the boot animation.
I'll wipe data partition and report back.
Please don't feel responsible for it, I'm about trying anything for rooting... I'm sure we'll get fixed
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Sure, we'll get it fixed no worries.
Anyway it seems like you need the accompanying botloader if its getting stuck on the bootloader animation.
https://www.androidfilehost.com/?fid=457095661767146350
If it still doesn't boot I'll give you a link to the entire engineering firmware via PM. Then se how you get on with that and gaining root.
.
ashyx said:
Sure, we'll get it fixed no worries.
Anyway it seems like you need the accompanying botloader if its getting stuck on the bootloader animation.
https://www.androidfilehost.com/?fid=457095661767146350
If it still doesn't boot I'll give you a link to the entire engineering firmware via PM. Then se how you get on with that and gaining root.
.
Click to expand...
Click to collapse
Thanks for the help buddy This didn't help either
le0.br4zuc4 said:
Thanks for the help buddy This didn't help either
Click to expand...
Click to collapse
Did the firmware load OK?
ashyx said:
Did the firmware load OK?
Click to expand...
Click to collapse
No, didn't work either. I'm going to get an insurance replacement
Sent from my Pixel XL using Tapatalk
le0.br4zuc4 said:
No, didn't work either. I'm going to get an insurance replacement
Click to expand...
Click to collapse
Are you saying that the full firmware didn't flash either? At what point does it fail?
Anyway don't worry I'll upload the stock AQA3 firmware later.
EDIT: I think this is all you'll need to get booting again. Flash via AP in ODIN.
If not I'll give you the link to the entire firmware.
https://www.androidfilehost.com/?fid=745425885120718683
.
i have the AQA3 as well, which files should i use first to help with this?
rootisthebest said:
i have the AQA3 as well, which files should i use first to help with this?
Click to expand...
Click to collapse
To do what, Root?
youve posted multiple files, i just wanna make sure i flash the right one(s), and can relay my results
Related
I accidentally bricked my phone. All was well, Rooted, Cyanogenmod 10, twrp through goomanager. But when i tried to Flash a ktoonsez kernel for this device 4.2.2 aosp, it said failed and would not boot back up. All i can get is to the "Downloading... Do not turn off target!!" screen. Basically im screwed anybody know how to unbrick her? shes only a day old. ;(
Odin the stock firmware.
old tylivequ
jd1639 said:
Odin the stock firmware.[/QUOTE
Do you have a link to jflteatt odin? All i can find is the ecan version? Im sorry but im kind of a noobie.
Click to expand...
Click to collapse
2 questions: you're certain you can't boot into recovery? Can you tell me any specifics about the kernel (name/date/etc)?
hayden55 said:
jd1639 said:
Odin the stock firmware.[/QUOTE
Do you have a link to jflteatt odin? All i can find is the ecan version? Im sorry but im kind of a noobie.
Click to expand...
Click to collapse
Go to sammobile.com. you can find stock firmware there. You have to register but it's free. You'll download a zip file, use 7-zip to extract the .tar.md5 file from it. Use that in Odin.
Click to expand...
Click to collapse
xBeerdroiDx said:
2 questions: you're certain you can't boot into recovery? Can you tell me any specifics about the kernel (name/date/etc)?
Click to expand...
Click to collapse
ktoonsez kt747. AOSP JELLYBEAN 4.2 Linux 3.4 VERSIONS from the att version galaxy s4 forum. I checked and i was running 3.4 linux and cyanogenmod. Its the most recent as i downloaded an hour ago. Also, i had twrp 2.6 through goo manager. Cannot get to boot to it. Anything but the android download screen all i get is a little haptic feedback and a black screen
jd1639 said:
hayden55 said:
Go to sammobile.com. you can find stock firmware there. You have to register but it's free. You'll download a zip file, use 7-zip to extract the .tar.md5 file from it. Use that in Odin.
Click to expand...
Click to collapse
Which would i be? ucuamdb or ucuamdl? And i can flash this with the odin for canada only? Where is the odin for usa att?
Click to expand...
Click to collapse
hayden55 said:
jd1639 said:
Which would i be? ucuamdb or ucuamdl? And i can flash this with the odin for canada only? Where is the odin for usa att?
Click to expand...
Click to collapse
*correction. I found odin3
Click to expand...
Click to collapse
hayden55 said:
jd1639 said:
Which would i be? ucuamdb or ucuamdl? And i can flash this with the odin for canada only? Where is the odin for usa att?
Click to expand...
Click to collapse
Use mdl. Odin is a separate program and is not us or Canada. Read this guide and use the tar.md5 for your device http://forum.xda-developers.com/showthread.php?p=26056924
Take your time and read the guide more than once. You can permanently brick your device.
Click to expand...
Click to collapse
jd1639 said:
hayden55 said:
Use mdl. Odin is a separate program and is not us or Canada. Read this guide and use the tar.md5 for your device http://forum.xda-developers.com/showthread.php?p=26056924
Take your time and read the guide more than once. You can permanently brick your device.
Click to expand...
Click to collapse
hey thanks for all the help guys! Nice forum. I always read through but have never joined until now. In an hour from now i will have the download Hopefully...
Click to expand...
Click to collapse
hayden55 said:
jd1639 said:
hey thanks for all the help guys! Nice forum. I always read through but have never joined until now. In an hour from now i will have the download Hopefully...
Click to expand...
Click to collapse
When you use Odin, let it do its thing. It'll take 10 to 20 minutes. Don't panic in the middle and unplug the usb. Be patient. And make sure you use the file you're downloading from sammobile. Don't use any of the links in the guide, except Odin. The other files are not for your device and they will brick you.
Click to expand...
Click to collapse
culating humpSno
jd1639 said:
hayden55 said:
When you use Odin, let it do its thing. It'll take 10 to 20 minutes. Don't panic in the middle and unplug the usb. Be patient. And make sure you use the file you're downloading from sammobile. Don't use any of the links in the guide, except Odin. The other files are not for your device and they will brick you.
Click to expand...
Click to collapse
yeah. I read through the GS2 guide and noted some of the similar stuff for when i do mine
Click to expand...
Click to collapse
jd1639 said:
hayden55 said:
When you use Odin, let it do its thing. It'll take 10 to 20 minutes. Don't panic in the middle and unplug the usb. Be patient. And make sure you use the file you're downloading from sammobile. Don't use any of the links in the guide, except Odin. The other files are not for your device and they will brick you.
Click to expand...
Click to collapse
I downloaded the file and flashed it with odin. It said passed and the screen had finished the download, but whenever i try and boot the phone i still dont have a boot. Only a black screen with a little vibration every 5~10 seconds? PLEASE... i need help now. I dont need to hear a "I told you so" from my dad. he is anti-root
Click to expand...
Click to collapse
hayden55 said:
jd1639 said:
I downloaded the file and flashed it with odin. It said passed and the screen had finished the download, but whenever i try and boot the phone i still dont have a boot. Only a black screen with a little vibration every 5~10 seconds? PLEASE... i need help now. I dont need to hear a "I told you so" from my dad. he is anti-root
Click to expand...
Click to collapse
Did you have "repartition" checked in ODIN? Because if you did, you shouldn't have.
If not, try to get into recovery (if you can) and try a factory reset.
Click to expand...
Click to collapse
scott14719 said:
hayden55 said:
Did you have "repartition" checked in ODIN? Because if you did, you shouldn't have.
If not, try to get into recovery (if you can) and try a factory reset.
Click to expand...
Click to collapse
For some reason my recovery wont work? maybe thats it? all i know is my recovery wont boot, and i flashed a bad kernel. I have my twrp backup on my external sd
Also... all i had checked was auto reboot and f. reset time. I flashed the reset file with pda box checked.
forgot to add. i flashed the file with those two boxes checked and it said pass. I think it must be the kernel or the recovery? how do you flash these in odin? I bet if i can track down the stock kernel and get twrp again it may boot.
Click to expand...
Click to collapse
hayden55 said:
scott14719 said:
For some reason my recovery wont work? maybe thats it? all i know is my recovery wont boot, and i flashed a bad kernel. I have my twrp backup on my external sd
Also... all i had checked was auto reboot and f. reset time. I flashed the reset file with pda box checked. How do i flash a new recovery, maybe that would boot it? If i can get into twrp i have my stock rom backed up and maybe the kernel with it.
Click to expand...
Click to collapse
If you are positive you can not get into 3e recovery, you might want to go to the OUDHS CWM thread in the development section and look at the OP for a method to install that recovery via ADB shell. If you can get it installed, you can then flash another ROM to get up and running. Then, if you desire, you can use GooManager to put TWRP back on your phone and restore a working Nandroid you might have. Or you can just set things up from scratch. But all of this is only if you can get into recovery or get a recovery installed back onto your phone.
If you tried to install the wrong Kernel for your phone, you might be hard bricked, in which case Jtag might be your only hope.
Click to expand...
Click to collapse
scott14719 said:
hayden55 said:
If you are positive you can not get into 3e recovery, you might want to go to the OUDHS CWM thread in the development section and look at the OP for a method to install that recovery via ADB shell. If you can get it installed, you can then flash another ROM to get up and running. Then, if you desire, you can use GooManager to put TWRP back on your phone and restore a working Nandroid you might have. Or you can just set things up from scratch. But all of this is only if you can get into recovery or get a recovery installed back onto your phone.
If you tried to install the wrong Kernel for your phone, you might be hard bricked, in which case Jtag might be your only hope.
Click to expand...
Click to collapse
WHAT! I was hoping it wouldnt come to JTAG. I've heard you can make a jig and then just download their software and do it yourself? But yes, I will go to that thread and check it out. also thanks for the help. this forum is MUCH better than others I have used for various products and what not.
Click to expand...
Click to collapse
I hope you get it figured out. But let me tell you what I DID and had the same outcome with NO RECOVERY at all, black screen with vibrate only. So what your describing sounds EXACTLY what happened to mine.
So I was "TRYING" to make a custom splash screen as I had for my SGS3. (Which messed with the kernel). When I went to boot up after the flash it did the black screen with vibrate.
I COULD get into DOWNOIAD mode but not recovery at all. I tried for a few days. I was worried my battery would be getting low after trying for a few hours. I tried to plug it in and the battery came up but it acted like it was stuck and nothing would happen.
Next I tried to use Odin to flash back to MDL stock firmware. It would flash and said completed. But upon reboot same half/vibrate screen.
Next I tried MDB firmware. STILL a NO GO. I had to send it in for JTAG. I think they had some issues getting it working as well. It arrived on a Thursday, and they did not finish getting it to where their site showed it was completed for 8 days. Then it didn't get sent out for another day. It finally arrived at my house 10 days after they received it. But GLADLY they were able to fix it. So good luck to you. If you do have to resort to JTAG it cost me a total of $90, Almost $30 dollars for me to TWO DAY it to them. $60 for JTAG and rush delivery.
Sent from My Spiderman Themed I337
Sorry to hear Odin didn't work. Odin does put the stock recovery on your phone in the correct partition if every thing goes correctly. But if your hard bricked Odin won't recovery the phone.
Try what Scott suggested but it's looking like jtag may be your best option at this point.
jd1639 said:
Sorry to hear Odin didn't work. Odin does put the stock recovery on your phone in the correct partition if every thing goes correctly. But if your hard bricked Odin won't recovery the phone.
Try what Scott suggested but it's looking like jtag may be your best option at this point.
Click to expand...
Click to collapse
hell yeah this phone is hard bricked. But att was cool and let me return for a new one. Really no questions asked as long as you didnt damage it or get it wet. Rip to my first gs4. But the good thing is is that it should only take like 2 days to get a new one, because the first one shipped pretty quick. Thanks for all the help guys
I need help!!!
I try everything to root my S4, any different way and i can't root, i fell its something wrong with it, cause phone is 16gb shows only 9gb 6 gb its for miscellaneous files. can someone help?
I like to re install everything.
First the memory shown is correct, the rest is used by android.
Second, what firmware are you on and what specific phone?
jd1639 said:
First the memory shown is correct, the rest is used by android.
Second, what firmware are you on and what specific phone?
Click to expand...
Click to collapse
Baseband version I337UCUAMF3
moiconlau said:
Baseband version I337UCUAMF3
Click to expand...
Click to collapse
MF3 = motochopper does not work. You would need to root using this method:
http://forum.xda-developers.com/showthread.php?t=2387577
NOTE: You cannot unroot once you do it. If you mess up your phone with root, there is likely no way to fix it. There is no possibility of installing a custom recovery, even after you have root...and so you can't flash any ROMs either. Know the risks and issues before you proceed and make sure root is THAT important to you.
Since you are on MF3 there is also no way to downgrade to previous firmware, you are stuck with the above restrictions until someone figures out a new exploit...and no ETA on that.
moiconlau said:
Baseband version I337UCUAMF3
Click to expand...
Click to collapse
Read the first two posts in this because there is good information. In the second post there is a link to how to root mf3. Follow the OP's directions there. If you're still having problems give specific info on where the problems are occurring
http://forum.xda-developers.com/showthread.php?p=42320391
Ps, jeffreii has very good points which you should consider.
i gonna try, and i will let you guys know about. thanks...
jd1639 said:
Read the first two posts in this because there is good information. In the second post there is a link to how to root mf3. Follow the OP's directions there. If you're still having problems give specific info on where the problems are occurring
http://forum.xda-developers.com/showthread.php?p=42320391
Ps, jeffreii has very good points which you should consider.
Click to expand...
Click to collapse
I get stock on download mode. Any solution for it?
moiconlau said:
I get stock on download mode. Any solution for it?
Click to expand...
Click to collapse
So, when you try to boot it just goes to download mode? You mentioned in your first post that you had tried to root, what did you try? Have tried to get into recovery mode?
jd1639 said:
So, when you try to boot it just goes to download mode? You mentioned in your first post that you had tried to root, what did you try? Have tried to get into recovery mode?
Click to expand...
Click to collapse
Yes, used casual and now its go by itself to download mode, and yes i try to go in recovery mode, and come back to download mode
moiconlau said:
Yes, used casual and now its go by itself to download mode, and yes i try to go in recovery mode, and come back to download mode
Click to expand...
Click to collapse
I hate to say it, but because your on mf3 and you tried to use causal, you've borked your phone. Afaik there is not currently away to recover it. You have to wait until if or when an odin flashable firmware comes out. You could try jtag but I don't think that even works. As a last resort try kies emergency recovery.
Hey thanks men, i got it.
Root access, thanks bout of you....:silly::laugh::good::good::good::good::good::good::good::good::good:
moiconlau said:
Hey thanks men, i got it.
Root access, thanks bout of you....:silly::laugh::good::good::good::good::good::good::good::good::good:
Click to expand...
Click to collapse
How did you get it to work?
jd1639 said:
I hate to say it, but because your on mf3 and you tried to use causal, you've borked your phone. Afaik there is not currently away to recover it. You have to wait until if or when an odin flashable firmware comes out. You could try jtag but I don't think that even works. As a last resort try kies emergency recovery.
Click to expand...
Click to collapse
i got it men,
Here what do i did:
remove battery wait fill seconds put it back on press volume down home and power its go to download mode, but when its ask if like to download mode or cancel and restart you press cancel and restart and that it.
Thanks for your guys help make my day. :good::good::good::good::good:
moiconlau said:
i got it men,
Here what do i did:
remove battery wait fill seconds put it back on press volume down home and power its go to download mode, but when its ask if like to download mode or cancel and restart you press cancel and restart and that it.
Thanks for your guys help make my day. :good::good::good::good::good:
Click to expand...
Click to collapse
Great to hear!
jd1639 said:
Great to hear!
Click to expand...
Click to collapse
I seriously doubt he got root.
It sounds more like he got it to boot (misspelled words).
No recovery and no way to factory reset. Sad.
Will all these folks be borked forever? On that note, I discovered an automated text survey after talking to AT&T support on the phone to light up a new SIM for a different handset. I gave high marks for the person's help, and low marks on AT&T in general, and in the last survey screen where you supply your comment, I told them what I thought of them locking the bootloader on the Samsung-SGH-I337.
The experience was not unlike wetting myself while wearing a dark suit, it gave me a warm feeling and hardly anyone will notice.
fukenbiker said:
I seriously doubt he got root.
It sounds more like he got it to boot (misspelled words).
No recovery and no way to factory reset. Sad.
Will all these folks be borked forever? On that note, I discovered an automated text survey after talking to AT&T support on the phone to light up a new SIM for a different handset. I gave high marks for the person's help, and low marks on AT&T in general, and in the last survey screen where you supply your comment, I told them what I thought of them locking the bootloader on the Samsung-SGH-I337.
The experience was not unlike wetting myself while wearing a dark suit, it gave me a warm feeling and hardly anyone will notice.
Click to expand...
Click to collapse
yes this is the problem, keep return to download mode after reboot, i root the phone but i cant put a custom room!
If anyone now how to fix please let me know.
moiconlau said:
yes this is the problem, keep return to download mode after reboot, i root the phone but i cant put a custom room!
If anyone now how to fix please let me know.
Click to expand...
Click to collapse
You will not be able to put a custom Rom our recovery on. You have the mf3 firmware. Don't try or you'll mess up your phone worse that it is.
jd1639 said:
You will not be able to put a custom Rom our recovery on. You have the mf3 firmware. Don't try or you'll mess up your phone worse that it is.
Click to expand...
Click to collapse
You cannot flash anything. You cannot obtain a recovery or any kind of factory reset. YOU HAVE THE MF3 FIRMWARE. If you try anything else you will break your handset. Be thankful you can get it to boot up at all.
fukenbiker said:
You cannot flash anything. You cannot obtain a recovery or any kind of factory reset. YOU HAVE THE MF3 FIRMWARE. If you try anything else you will break your handset. Be thankful you can get it to boot up at all.
Click to expand...
Click to collapse
is nothing also than i can do?
moiconlau said:
is nothing also than i can do?
Click to expand...
Click to collapse
Sadly no since u have MF3 only option is root only.
Sent from my SAMSUNG-SGH-I337 using Forum Runner
Could anyone upload a stock build.prop back up of the note 3. i tried getting tegra effects on my device and ended up with the black screen of death
1- Wrong forum
2- What is your model number?
3- BLACK screen of death?
Sent from my SM-N900W8
yulet said:
1- Wrong forum
2- What is your model number?
3- BLACK screen of death?
Sent from my SM-N900W8
Click to expand...
Click to collapse
N900 i know this is the wrong forum sorry, i kinda needs this though. can get into recovery can get into download mode odin detects however i it doesnt boot past the startup screen. doesnt even get to the boot animation.
zephyr69 said:
N900 i know this is the wrong forum sorry, i kinda needs this though. can get into recovery can get into download mode odin detects however i it doesnt boot past the startup screen. doesnt even get to the boot animation.
Click to expand...
Click to collapse
Just flash the stock ROM for your model with ODIN. It'll take less time than waiting for somebody to post the file (unless.. a miracle happens.).
Sent from my SM-N900W8
yulet said:
Just flash the stock ROM for your model with ODIN. It'll take less time than waiting for somebody to post the file (unless.. a miracle happens.).
Sent from my SM-N900W8
Click to expand...
Click to collapse
I figured however i have limited bandwith where i am now and will only be able to download the stock next weekend. want to get my phone up and running asap
Have you got an authorised PC to push the file from? I'm certain to get adb access in 4.3, you get prompted to authorise the connecting machine, a security feature, if that's the case and you haven't done it, you may not new able to rectify your phone anyway, without the full firmware?
Sent from my SM-N9005 using Tapatalk
RavenY2K3 said:
Have you got an authorised PC to push the file from? I'm certain to get adb access in 4.3, you get prompted to authorise the connecting machine, a security feature, if that's the case and you haven't done it, you may not new able to rectify your phone anyway, without the full firmware?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
i havent pushed the file via ADB, i have done so using build.prop editor. i then by accident wiped my internal sd thus having no back up of the file. i just need the stock build.prop file so that i can push it back via custom recovery.
Please Help! after adding a line in build.prop to use android l bar my phone is black
Dear all,
after I add a line in build.prop (qemu.hw.mainkey=0)to get android l bar.
After restart I get black screen. so now I like to change back to my safe file.
have someone solution for me to get back my device?
I use Note 3 n9005 kitkat 4.4.2 . rooted.
how I can push this file via adb? even my device is not listed.
I really hope someone can help me
thanks in advanced
Try to flash stock firmware via Odin?
vndnguyen said:
Try to flash stock firmware via Odin?
Click to expand...
Click to collapse
thx for answer me.
is this the only solution I have?
jokertest said:
Dear all,
after I add a line in build.prop (qemu.hw.mainkey=0)to get android l bar.
After restart I get black screen. so now I like to change back to my safe file.
have someone solution for me to get back my device?
I use Note 3 n9005 kitkat 4.4.2 . rooted.
how I can push this file via adb? even my device is not listed.
I really hope someone can help me
thanks in advanced
Click to expand...
Click to collapse
Can you get into recovery?
AO7 said:
Can you get into recovery?
Click to expand...
Click to collapse
Yes I can get recover and download mode. so I tried adb but windows not load my device. so adb pull /system/build.prop not work. is it possible do use apply update from adb or use a update.zip via external storage, if yes how do I have to make this zip?
jokertest said:
Yes I can get recover and download mode. so I tried adb but windows not load my device. so adb pull /system/build.prop not work. is it possible do use apply update from adb or use a update.zip via external storage, if yes how do I have to make this zip?
Click to expand...
Click to collapse
Check to make sure if the correct driver for your device has been installed.
You can install Kies to get the driver also installed.
vndnguyen said:
Check to make sure if the correct driver for your device has been installed.
You can install Kies to get the driver also installed.
Click to expand...
Click to collapse
The Driver and adb work correctly you can see in my pic.
the first is my phone without listing and the second is from my wife with listed.
jokertest said:
is it possible do use apply update from adb or use a update.zip via external storage, if yes how do I have to make this zip?
Click to expand...
Click to collapse
Check these thread, I have not tested it.
http://forum.xda-developers.com/showthread.php?t=2163974
http://www.xda-developers.com/android/easily-create-recovery-compatible-archives-with-zip-creator/
http://forum.xda-developers.com/sho...mctr=(not provided)&__utmv=-&__utmk=269061234
vndnguyen said:
Check these thread, I have not tested it.
http://forum.xda-developers.com/showthread.php?t=2163974
http://www.xda-developers.com/android/easily-create-recovery-compatible-archives-with-zip-creator/
http://forum.xda-developers.com/sho...mctr=(not provided)&__utmv=-&__utmk=269061234
Click to expand...
Click to collapse
I tried this but not work.
I get: footer wrong and signature verification failed. I tried this via adb side load and update from external storage.
usb driver in windows will only load in adb sideload
another idea?
Have you tried factory restore?
I'm not sure but maybe it would rebuild it?
MystaMagoo said:
Have you tried factory restore?
I'm not sure but maybe it would rebuild it?
Click to expand...
Click to collapse
mmh just tried but same state as before.
so I really think I have to flash stock rom. But how about the root. I use towelroot before so knoxx show 0x0.
will flash stockroom change knoxx 0x1. Any special for flash stockrom?
zephyr69 said:
Could anyone upload a stock build.prop back up of the note 3. i tried getting tegra effects on my device and ended up with the black screen of death
Click to expand...
Click to collapse
you should always make a copy of the rom, I have roms and firmwares at my site...
happened to me 2 days ago, I changed one hltexx to hlte or hltetmo to get my correct icons, and black screen, I just flash my good rom, keep a good copy on your sdcard or ext. so u can flash back, or restore ur backup nandroid copy.
http://www.androidfilehost.com/?w=devices&uid=9390248398092763634
zephyr69 said:
Could anyone upload a stock build.prop back up of the note 3. i tried getting tegra effects on my device and ended up with the black screen of death
Click to expand...
Click to collapse
here is my back up build.prop from note 3 n9005 UK without the f...g line I add for l bar. hope you can push to your device and it work.
for me I not have solution to get my phone to run
Moved from the android dev section to general section as suggested by @malbert16442 This should not trip knox but Im guessing most people who are viewing this already have anyway . Simply Download on your PC, put your device into download mode (power off phone and hold volume down, home button and power button and let go when you see the download mode icon) and place the file in the AP slot in Odin.
LINK HERE: https://drive.google.com/open?id=0Bw2KkJbEyV5EOEo2SWMzQ21naUU
Rom Devs feel free to use this for Deodexing or anything without asking permission. Free to use for anything!
first
You're welcome.
Oh boy been waiting for this thank you very much
badapple420 said:
Oh boy been waiting for this thank you very much
Click to expand...
Click to collapse
No problem! Now I can help out with testing roms and revert back a lot easier and quicker if something goes wrong!
malbert16442 said:
first
Click to expand...
Click to collapse
Is this a rooted ROM?
Thanks.
Cooljb said:
Is this a rooted ROM?
Thanks.
Click to expand...
Click to collapse
No this is the official restore file. So unrooted.
chippinganimal said:
No this is the official restore file. So unrooted.
Click to expand...
Click to collapse
Got it. Thanks.
works, tested
It worked on my S5 but will not root using CF auto root. Mine locked up and had to re-flash.
Anyone root this yet and how?
[email protected] said:
It worked on my S5 but will not root using CF auto root. Mine locked up and had to re-flash.
Anyone root this yet and how?
Click to expand...
Click to collapse
For MM, you have to use a different method called systemless root. I did it a while ago and there is a written out tutorial over on the "sprint gs5 android 6.0" thread in this forum. Just use the search tool there and search "systemless root."
Decisions, decisions - - use this to 'upgrade stock' from my rooted stock deox and have phone totally reset ...or wait for deox stock MM PCA and see if it will take without reset ...
hmmm
Was all hot to upgrade the 2 yo phone , but nothing compelling..nothing faster with qi charging, radio, ir blaster , sd-card slot, water proof , and definetley nothing with removable battery. S7 is the closest and it is locked down ..so sad.
Kenny
chippinganimal said:
Moved from the android dev section to general section as suggested by @malbert16442 This should not trip knox but Im guessing most people who are viewing this already have anyway . Simply Download on your PC, put your device into download mode (power off phone and hold volume down, home button and power button and let go when you see the download mode icon) and place the file in the AP slot in Odin.
LINK HERE: https://drive.google.com/open?id=0Bw2KkJbEyV5EOEo2SWMzQ21naUU
Rom Devs feel free to use this for Deodexing or anything without asking permission. Free to use for anything!
Click to expand...
Click to collapse
This should be in the DEV section. If he told you to move it, it was probably because your original link didn't work.
Flashed successfully, phone stuck booting. Did it take an excessive amount of time to boot for any of you? Thank you for this!
hussmanne said:
Flashed successfully, phone stuck booting. Did it take an excessive amount of time to boot for any of you? Thank you for this!
Click to expand...
Click to collapse
It can take up to 20 minutes to boot, but usually takes around 10 min
hussmanne said:
Flashed successfully, phone stuck booting. Did it take an excessive amount of time to boot for any of you? Thank you for this!
Click to expand...
Click to collapse
I needed to wipe data, then it booted
Sent from my SM-G900P using XDA-Developers mobile app
maheboi said:
I needed to wipe data, then it booted
Sent from my SM-G900P using XDA-Developers mobile app
Click to expand...
Click to collapse
Wiping data did it! Thank you!
Has anyone tried flashing this using flashfire, injecting root, and flashing the stock partitions via Odin with success? Wile my phone is beyond the warranty period, I have not tripped knox yet and would like to keep it that way if possible. I was able to have completely stock rooted OK4 with this method.
Just to be clear -- will applying this tar via Odin do the full update of MM bootloader, kernel, modem (if applicable), etc etc?
nickmaps said:
Just to be clear -- will applying this tar via Odin do the full update of MM bootloader, kernel, modem (if applicable), etc etc?
Click to expand...
Click to collapse
Yup! So you will be able to flash custom roms like @malbert16442 s7 port without any issues (well when he releases V3 as he a group of people beta testing it right now and according to @philiptibbs who is among them V3 works fully with sprint. And on 2.5 everything works but sending sms (recieving sms and sending/recieving mms work fine though, not sure why thats the case.)
I was just trying to install the 9.0.6 update manually following the instructions in the thread for it here on xda and it wouldn't work. I uninstalled magisk and restored images through magisk manager as the directions stated to do. I couldn't get the update to show in the local upgrade section under system update so decided to reboot to see if that would fix it but now my phone will not boot. It goes to a screen that says my device is corrupt and won't go past that. It says to hit the power button to continue but that just makes it boot back to that screen and if I just wait the phone shuts off.
Any help is appreciated.
(UPDATE) Thanks for the help guys. I got the phone booting again by flashing the 9.0.6 ROM in fastboot. I'm still getting the "device is corrupt" message and have to hit the power button twice to get it to boot so if anyone knows a fix for this I would appreciate it. At least I can use the phone now.
imucarmen said:
I was just trying to install the 9.0.6 update manually following the instructions in the thread for it here on xda and it wouldn't work. I uninstalled magisk and restored images through magisk manager as the directions stated to do. I couldn't get the update to show in the local upgrade section under system update so decided to reboot to see if that would fix it but now my phone will not boot. It goes to a screen that says my device is corrupt and won't go past that. It says to hit the power button to continue but that just makes it boot back to that screen and if I just wait the phone shuts off.
Any help is appreciated.
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-6t/how-to/tool-t-mobile-oneplus-6t-msmdownloadtool-t3868916
Worked for me. Unzip to a folder....run it.....with phone off press and hold all 3 buttons......it will find device.... press start.....Yahtzee....hope this helped
imucarmen said:
I was just trying to install the 9.0.6 update manually following the instructions in the thread for it here on xda and it wouldn't work. I uninstalled magisk and restored images through magisk manager as the directions stated to do. I couldn't get the update to show in the local upgrade section under system update so decided to reboot to see if that would fix it but now my phone will not boot. It goes to a screen that says my device is corrupt and won't go past that. It says to hit the power button to continue but that just makes it boot back to that screen and if I just wait the phone shuts off.
Any help is appreciated.
Click to expand...
Click to collapse
Are you able to boot into fastboot?
mang0 said:
Are you able to boot into fastboot?
Click to expand...
Click to collapse
Yes.
mang0 said:
Are you able to boot into fastboot?
Click to expand...
Click to collapse
Mine wouldn't boot into anything....said hardware/software mismatch.
headcreepz said:
https://forum.xda-developers.com/oneplus-6t/how-to/tool-t-mobile-oneplus-6t-msmdownloadtool-t3868916
Worked for me. Unzip to a folder....run it.....with phone off press and hold all 3 buttons......it will find device.... press start.....Yahtzee....hope this helped
Click to expand...
Click to collapse
That says it's for the T Mobile version only. I have the global version.
imucarmen said:
That says it's for the T Mobile version only. I have the global version.
Click to expand...
Click to collapse
Shoot...sorry
There is one on here for international.....look in guides
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
imucarmen said:
Yes.
Click to expand...
Click to collapse
You could try to use msm download tool linked above or flash the full rom again since you can get into fastboot. I'd prob try that before the msm tool though.
mang0 said:
You could try to use msm download tool linked above or flash the full rom again since you can get into fastboot. I'd prob try that before the msm tool though.
Click to expand...
Click to collapse
do you have any instructions on how to go about flashing a rom in fastboot? I've never done it before.
imucarmen said:
do you have any instructions on how to go about flashing a rom in fastboot? I've never done it before.
Click to expand...
Click to collapse
Check this link
https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
imucarmen said:
do you have any instructions on how to go about flashing a rom in fastboot? I've never done it before.
Click to expand...
Click to collapse
Just download full zip of fastboot rom, extract into a folder, connect you phone in fastbbot mode and run flash all bat file.
You can find all in this thread:
https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
VampireHeart said:
Just download full zip of fastboot rom, extract into a folder, connect you phone in fastbbot mode and run flash all bat file.
You can find all in this thread:
https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
Click to expand...
Click to collapse
Thanks. I got that part and was able to get my phone booting again but I still get the corrupt device message when I start the phone. Wish I knew how to get rid of it. IS there any return to full stock methods that also locked the bootloader and restore all partitions to stock? That is the only thing I can think of that might work.
imucarmen said:
Thanks. I got that part and was able to get my phone booting again but I still get the corrupt device message when I start the phone. Wish I knew how to get rid of it. IS there any return to full stock methods that also locked the bootloader and restore all partitions to stock? That is the only thing I can think of that might work.
Click to expand...
Click to collapse
Someone say that wiping all with stock recovery solved, but device work fine also whit that message, otherwise you can try MSM Download Tool, it will restore all stock to 9.0.5 with locked bootloader.
imucarmen said:
Thanks. I got that part and was able to get my phone booting again but I still get the corrupt device message when I start the phone. Wish I knew how to get rid of it. IS there any return to full stock methods that also locked the bootloader and restore all partitions to stock? That is the only thing I can think of that might work.
Click to expand...
Click to collapse
Use the MSMDownloadTool for the international version, it's the only way to bypass the verity trigger, it will restore the device to full stock as if you never unlocked the bootloader to begin with.
VampireHeart said:
Someone say that wiping all with stock recovery solved, but device work fine also whit that message, otherwise you can try MSM Download Tool, it will restore all stock to 9.0.5 with locked bootloader.
Click to expand...
Click to collapse
Dark Nightmare said:
Use the MSMDownloadTool for the international version, it's the only way to bypass the verity trigger, it will restore the device to full stock as if you never unlocked the bootloader to begin with.
Click to expand...
Click to collapse
Thanks guys. I will try this out in the future. For now I'm just going to ride with what I got since I don't feel like setting my phone up again. I don't reboot much so it shouldn't bother me too bad. I guess it's good I learned something new.
Dark Nightmare said:
Use the MSMDownloadTool for the international version, it's the only way to bypass the verity trigger, it will restore the device to full stock as if you never unlocked the bootloader to begin with.
Click to expand...
Click to collapse
Can you provide me a link? The only MSMDownloadTool I see says it's only for the T-Mobile version. Thanks.
imucarmen said:
Can you provide me a link? The only MSMDownloadTool I see says it's only for the T-Mobile version. Thanks.
Click to expand...
Click to collapse
Msm download tool for int : https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
Just paste this in terminal and device is corrupt message will be gone
su
Reboot "dm-verity enforcing"
Hit enter
Enjoy
[email protected] said:
Just paste this in terminal and device is corrupt message will be gone
su
Reboot "dm-verity enforcing"
Hit enter
Enjoy
Click to expand...
Click to collapse
Yep this should do the trick. It worked for me!
[email protected] said:
Just paste this in terminal and device is corrupt message will be gone
su
Reboot "dm-verity enforcing"
Hit enter
Enjoy
Click to expand...
Click to collapse
I keep getting this error and I typing it wrong?