Does anyone have a copy of the stock recovery? I'm trying to upgrade to b150 (both automated via the setting menu and manually by secret menu) but every time it tries to flash the firmware, the phone just reboots to TWRP and sits there.
Any help would be appreciated.
The directions you should be following have a copy of the stock recovery, don't they? If not, post a link to those directions.
Bill R said:
Does anyone have a copy of the stock recovery? I'm trying to upgrade to b150 (both automated via the setting menu and manually by secret menu) but every time it tries to flash the firmware, the phone just reboots to TWRP and sits there.
Any help would be appreciated.
Click to expand...
Click to collapse
divineBliss said:
The directions you should be following have a copy of the stock recovery, don't they? If not, post a link to those directions.
Click to expand...
Click to collapse
The first attempt was not following a guide. It was by going into the AT&T Software Update settings applet (my phone is on b140 and b150 was downloaded this way). That would start to load the update, reboot the phone into TWRP and then sit there. Subsequent booting into the OS would only re-attempt to install the update which would again reboot to TWRP.
After recovering my phone from a pre-update backup I tried, somewhat, following this method:
https://forum.xda-developers.com/android/development/guide-how-to-update-b130-to-b140-b150-t3555254
I was able to install the stock b140 image from my SD card but where it said TWRP would be gone, mine still had it. Attempting the secret menu would start the firmware update which would, again, boot to TWRP and sit there.
The stock ROMs in that guide thread should have stock recovery images. Just restore one of those stock recovery images using TWRP. Does your phone still have root?
Bill R said:
The first attempt was not following a guide. It was by going into the AT&T Software Update settings applet (my phone is on b140 and b150 was downloaded this way). That would start to load the update, reboot the phone into TWRP and then sit there. Subsequent booting into the OS would only re-attempt to install the update which would again reboot to TWRP.
After recovering my phone from a pre-update backup I tried, somewhat, following this method:
https://forum.xda-developers.com/android/development/guide-how-to-update-b130-to-b140-b150-t3555254
I was able to install the stock b140 image from my SD card but where it said TWRP would be gone, mine still had it. Attempting the secret menu would start the firmware update which would, again, boot to TWRP and sit there.
Click to expand...
Click to collapse
divineBliss said:
The stock ROMs in that guide thread should have stock recovery images. Just restore one of those stock recovery images using TWRP. Does your phone still have root?
Click to expand...
Click to collapse
I checked when you asked and surprisingly it does not. I'm surprised because I thought I re-installed it when I flashed the b140 ROM from that thread.
I'll try again this evening.
Also, if you followed the rooting guides, you should have your own copy of the stock recovery in your first TWRP backup.
Bill R said:
I checked when you asked and surprisingly it does not. I'm surprised because I thought I re-installed it when I flashed the b140 ROM from that thread.
I'll try again this evening.
Click to expand...
Click to collapse
Bill R said:
I checked when you asked and surprisingly it does not. I'm surprised because I thought I re-installed it when I flashed the b140 ROM from that thread.
I'll try again this evening.
Click to expand...
Click to collapse
The roms do NOT include Stock Recovery or any recovery for that matter ...Roms don't flash recovery (none that I have ever flashed anyway)
If you need B140 Stock recovery it's here B140.Stock.recovery.img
The Guide kind of assumes you just did the B130 to B140 update and you already have stock recovery installed
and yes if your phone was B140 when you rooted it you should already have your own stock backup of B140
I have to confess to a case of cranial flatulence. I had made a stock recovery backup. I'll proceed to banging my head on my desk now.
Back to business. So, after breaking my phone three times today, I finally got it back to the stock b140 (H1611C07B140) from the other thread and I'm ready to try the firmware upgrade again. I still have TWRP on it though so I'm wondering if I should reinstall the stock recovery first before trying the firmware upgrade. The other thread states that the b140-to-b150 firmware should overwrite the recovery but for me every time I do the firmware it boots to TWRP and sits there.
Bill R said:
I have to confess to a case of cranial flatulence. I had made a stock recovery backup. I'll proceed to banging my head on my desk now.
Back to business. So, after breaking my phone three times today, I finally got it back to the stock b140 (H1611C07B140) from the other thread and I'm ready to try the firmware upgrade again. I still have TWRP on it though so I'm wondering if I should reinstall the stock recovery first before trying the firmware upgrade. The other thread states that the b140-to-b150 firmware should overwrite the recovery but for me every time I do the firmware it boots to TWRP and sits there.
Click to expand...
Click to collapse
Yes I corrected the Guide
Flash stock recovery before doing the dload/ update.app flash
as soon as the firmware update is done boot to the bootloader
fastboot boot H1611.TWRP.New.img
then mount cust / system and data and flash the B150.Stock.rom
also flash Supersu and reboot
Thanks guys! I was finally able to get the b150 on with the additional instructions. Key was a couple of items:
Me confusing TWRP that I already had with H1611.TWRP.New.img.
Needing to go back to the stock recovery for the firmware upgrade
Discovering, by chance, that to get to fastboot mode with the power + volume down button it had to be connected to the PC via USB. It doesn't work if not connected.
Tomorrow I will get to where I've been wanting by installing the ROM to get rid of the AT&T bloat.
So thanks again!
Bill R said:
Thanks guys! I was finally able to get the b150 on with the additional instructions. Key was a couple of items:
Me confusing TWRP that I already had with H1611.TWRP.New.img.
Needing to go back to the stock recovery for the firmware upgrade
Discovering, by chance, that to get to fastboot mode with the power + volume down button it had to be connected to the PC via USB. It doesn't work if not connected.
Tomorrow I will get to where I've been wanting by installing the ROM to get rid of the AT&T bloat.
So thanks again!
Click to expand...
Click to collapse
It's pretty clear in the guide
When it's done it will reboot the phone so now boot to the bootloader with power + volume down while hooked to the PC via USB
Click to expand...
Click to collapse
Anyway congratulations
I hope you Enjoy the CleanRom
Related
After attempt at installing software update to Nexus 10 tablet will not boot. Have wiped Cache and even then did a factory reset. Nothing. Google appears and then twirling colorful dots and nothing. For hours just twirling dots., Samsung and Google and Best Buy geeks says nothing they can do. No longer under warranty but very upset since tablet was working great until update. I am not very tech savvy but can anyone help or do I just have a new paperweight? Thanks for any advice.
I have not made any modifications to the tablet.
Just flash the newest factory image. Get it and the instructions to flash it from here:
https://developers.google.com/android/nexus/images
yes flash the newest image
After getting a notification of the latest update I went and rebooted for the update to install but it went to the twrp recovery and nothing happens, is there a way to install the update?
VivaErBetis said:
Just flash the newest factory image. Get it and the instructions to flash it from here:
https://developers.google.com/android/nexus/images
Click to expand...
Click to collapse
Gibbothegreat said:
After getting a notification of the latest update I went and rebooted for the update to install but it went to the twrp recovery and nothing happens, is there a way to install the update?
Click to expand...
Click to collapse
Still having proble? what is your recovery ? stock? did you update the bootloader? depending on your answer I should be able to help you out, thx
Khaon said:
Still having proble? what is your recovery ? stock? did you update the bootloader? depending on your answer I should be able to help you out, thx
Click to expand...
Click to collapse
Hi Khaon, I have stock lollipop version 5.1.1 . (LMY47V) and latest twrp version. When upgrading it restarts and goes to recoverys main screen.
BTW how can I check which version my bootloader is?
same problem
VivaErBetis said:
Just flash the newest factory image. Get it and the instructions to flash it from here:
as a newbie .I'm not allowed to reference your link !!
I rooted my nexus 10 using xda instructions., installed CWM. All good. I tried backup and recovery and screwed something up in recovery. Got stuck in recovery mode reboot loop. Many gyrations, no fix, so I tried factory reset. Still no fix.
I decided to install a new version of the OS using the Mantaray tar you reference above. UBS connecting and fastboot. All messages look good. Now I have the problem reported in this thread. Stuck with flying balls and no boot. Very interested in any suggestions you may have.
Click to expand...
Click to collapse
Gibbothegreat said:
Hi Khaon, I have stock lollipop version 5.1.1 . (LMY47V) and latest twrp version. When upgrading it restarts and goes to recoverys main screen.
BTW how can I check which version my bootloader is?
Click to expand...
Click to collapse
So you keep just boot looping into twrp, right ?
Did you try installing a custom ROM through adb or just connecting your device?
If it keeps boot looping you gotta to wipe the full storage.
Khaon said:
So you keep just boot looping into twrp, right ?
Did you try installing a custom ROM through adb or just connecting your device?
If it keeps boot looping you gotta to wipe the full storage.
Click to expand...
Click to collapse
No, on a normal reboot or a shutdown/restart it's fine no problems there but when I try to install the update via system update it reboots into twrp. I attach a pic of my system.
Gibbothegreat said:
No, on a normal reboot or a shutdown/restart it's fine no problems there but when I try to install the update via system update it reboots into twrp. I attach a pic of my system.
Click to expand...
Click to collapse
Oh I see, well, you should just flash a custom ROM or if you want to stay with official factory images, you should just follow instruction there:
https://developers.google.com/android/nexus/images
What you do need is just have fastboot executable once you are into the bootloader.
You can easily access the bootloader from twrp : shutdown > reboot into booatloader
Cool thx for your continued help :good:
The problem is due to your attempting an OTA update with a custom recovery (TWRP). You can only do OTA with stock recovery. Once you are in this situation, your easiest way out of it is to simply apply the latest factory image using "fastboot", but this will also wipe your user data so backup any photos, music, etc. before you start. You will also have to reload programs from Playstore once the new image is installed.
Does anyone know how I can update when having TWRP installed and rooted ?
The phone says there is an update but doesnt install.
So I used yotaflasher to download the new firmware and took the recovery.img from the folder
and flashed via fastboot the stock recovery.img.
But the phone always says there is an update and reboots. then the green android is displayed but only for five seconds. then it boots and says again that there is an update and if I want to install it.
And so on...
Do I have another chance to update my 5.0 Firmware.
I don´t want to lose my apps and userDAta.
Can I still flash with yotaflasher and NOT lose all my settings and updates ?
Thanks in advance.
yotaflasher
is what I used. I was rooted, but still with stock recovery.
yotaflasher writes all partitions, and asks for user data. if you answer no all apps and settings are preserved.
maybe there is still the update file in /firmware ? try deleting.
good luck,
Stefan
I'm in the same boat. Rooted, twrp 2.8.5, got the OTA notification. After it downloads, phone shutsdown and boots to twrp and sits there. From twrp, what can I do to help it along?
Thanks
terraformer said:
I'm in the same boat. Rooted, twrp 2.8.5, got the OTA notification. After it downloads, phone shutsdown and boots to twrp and sits there. From twrp, what can I do to help it along?
Thanks
Click to expand...
Click to collapse
The easiest way was to download yotaflasher, let it load the latest firmware and boot your mobile phone into bootloader mode (via quickboot app).
Connect your phone, then let yotaflasher flash the new firmware but say "NO" to overwriting UserData.
Thats it...
After all was setup again (and rooted) I reflashed TWRP and made a backup.
terraformer said:
I'm in the same boat. Rooted, twrp 2.8.5, got the OTA notification. After it downloads, phone shutsdown and boots to twrp and sits there. From twrp, what can I do to help it along?
Thanks
Click to expand...
Click to collapse
You need stock recovery to be flashed for auto-update...
So this morning I got an update to fix the voLTE bug. I'm unlocked with twrp installed and rooted. Just for the sake of experimenting I tried installing it. Well that didn't work. Just gets stuck in twrp recovery and you have to power the phone off completely to get it to boot. I guess my question (even though it's a little early) is there a way to install the update without reverting back to stock?
EDIT: Link to the zip
https://drive.google.com/open?id=0BxqNotAWlwLUQ1Fzcjc2YXd4QzA
I don't believe so.
In the past you either had to go back to stock or wait on someone to create a compatible update for rooted devices.
Can you post link to zip?
If you are rooted, you can find the zip in cache folder in recovery.
Can you add what variant and build you are using before the update? Also the build afterwards?
KapilFaujdar said:
Can you post link to zip?
If you are rooted, you can find the zip in cache folder in recovery.
Click to expand...
Click to collapse
I got the update, but all I see on my magisk rooted G5+ in /cache/recovery are log files and the fstab files. Anywhere else to look?
gghose said:
I got the update, but all I see on my magisk rooted G5+ in /cache/recovery are log files and the fstab files. Anywhere else to look?
Click to expand...
Click to collapse
Yeah I can't find anything in that folder either.
I received the update and applied it. I am not rooted.
I have the XT1687 model.
My current build number is NPN25.137-35
My device BL unlocked, TWRP installed and rooted with magisck.
I'm getting the update notification and splash screens several times daily.
Anyone rooted try installing the update with Flashfire app?
bvsbutthd101 said:
So this morning I got an update to fix the voLTE bug. I'm unlocked with twrp installed and rooted. Just for the sake of experimenting I tried installing it. Well that didn't work. Just gets stuck in twrp recovery and you have to power the phone off completely to get it to boot. I guess my question (even though it's a little early) is there a way to install the update without reverting back to stock?
Click to expand...
Click to collapse
If you have systemless supersu, you should just be able to apply the update after reverting to stock recovery.
So I found where the zip downloads. I wonder what flashing it in twrp would do?
EDIT: Here's the link to the zip and I've put it in the OP.
https://drive.google.com/open?id=0BxqNotAWlwLUQ1Fzcjc2YXd4QzA
glight0 said:
My device BL unlocked, TWRP installed and rooted with magisck.
I'm getting the update notification and splash screens several times daily.
Anyone rooted try installing the update with Flashfire app?
Click to expand...
Click to collapse
OK, so I tried flashing recovery.img from stock firmware build 33. But the OTA update will not install, instead I get an error after downloading and rebooting (red triangle at recovery mode).
So I tried fully reverting to stock firmware but I decided to skip over erasing userdata. Afterward the OTA downloaded and installed successfully. Keeping userdata does not seem to have caused an issue.
My problem now though is how to get root back without having to wipe userdata after re-flashing TWRP.
Or is this not possible and if I want to root I must first wipe userdata so that TWRP can read internal memory?
bvsbutthd101 said:
So I found where the zip downloads. I wonder what flashing it in twrp would do?
EDIT: Here's the link to the zip and I've put it in the OP.
https://drive.google.com/open?id=0BxqNotAWlwLUQ1Fzcjc2YXd4QzA
Click to expand...
Click to collapse
Just tried flashing it with TWRP and no luck:
Verifying current system....
E3002: Package expects build thumbprint of 7.0/NPN25.137-35/37:user/release-keys or 7.0/NPN25.137-33/35:user/release-keys; this device has .
Updated process ended with ERROR: 7
which doesn't make much sense since I rooted the stock ROM (Build number reads NPN25.137-33).
If your using a custom recovery flash the stock recovery, then go to the stock recovery and using your computer flash using adb sideboard command. I assume you already know how to do this. Hope that helps.
gghose said:
Just tried flashing it with TWRP and no luck:
Verifying current system....
E3002: Package expects build thumbprint of 7.0/NPN25.137-35/37:user/release-keys or 7.0/NPN25.137-33/35:user/release-keys; this device has .
Updated process ended with ERROR: 7
which doesn't make much sense since I rooted the stock ROM (Build number reads NPN25.137-33).
Click to expand...
Click to collapse
I'm stuck in the same boat... no idea how to flash the stock recovery and sideboard, what that even means, or if that would break root. I just followed the step-by-step "how to root" video when I first got the phone
There's a workaround to disable the "advanced LTE" or whatever it was called, so I did that. But in the meantime until a more "user friendly" means of updating is available, is there a way I can get rid of this nag screen? Way back on an earlier device (Samsung Charge?) I remember manually editing a "build.prop" file or something to match the latest version so I wouldn't keep getting the software update nag. Is there something that will do the same here, or is there a system app I can freeze in TiB?
My best guess is freezing "Moto Actions 03.022.1.4-N" because it's showing "(updated)" on the side.
rellim113 said:
I'm stuck in the same boat... no idea how to flash the stock recovery and sideboard, what that even means, or if that would break root. I just followed the step-by-step "how to root" video when I first got the phone .
Click to expand...
Click to collapse
What he means is you need to download the stock rom, unzip it, then boot phone to bootloader mode and connect to PC. Then flash the recovery.IMG from the stock rom folder with command prompt:
Fastboot flash recovery recovery.img
Then you can on the phone tell it to boot to recovery mode. This will be a screen with Android on his back and the words NO Command on the bottom. Then plug to PC and use adb command to sideload the update zip like this:
adb sideload [nameofupdatefile].Zip
glight0 said:
What he means is you need to download the stock rom, unzip it, then boot phone to bootloader mode and connect to PC. Then flash the recovery.IMG from the stock rom folder with command prompt:
Fastboot flash recovery recovery.img
Then you can on the phone tell it to boot to recovery mode. This will be a screen with Android on his back and the words NO Command on the bottom. Then plug to PC and use adb command to sideload the update zip like this:
adb sideload [nameofupdatefile].Zip
Click to expand...
Click to collapse
Strange, reflashed the stock recovery and adb can't see it (adb devices returns nothing). And when trying to install it via the normal OTA way, the stock recovery tries to install but ends with an error.
That's what happened to me when I tried reverting to stock recovery and then trying to install update from phone Settings app.
I ended up having to revert to stock rom to get ota to apply with settings app. But now I am trying to root again but after installing TWRP data is encrypted again. So looks like I will have to wipe data before re-rooting.
This morning I my phone pesented itself in TWRP.
Maybe this is because over the past days I repeatedly got notifications that a system upgrade wanted to install itself (I have a modified 26s X720 from Tora33).
I rejected those notifications.
Now I am stuck in TWRP and I cannot get around it. What I tried:
Reinstalling previous firmware (Tora33 26s) still on the phone
Restoring a TWRP backup from 6 months ago (TWRP didn't see it, maybe it's from a previous TWRP version, I now have v. 3.1)
Flash via fastbood factory image using Mauro's Tool All In One (error message "can't find file mke2fs.conf")
Wipe data, cache, dalvik cache, system; then install Mauro_V2.2 cleansed 23s firmware which I transferred to the phone
Every time it boots up in TWRP.
Your bricked you never flash ota with twrp you should read before doing anything.
The only thing that can help is ofil.
I suggest you study well before trying it.
Sent from my LEX720 using xda premium
mchlbenner said:
Your bricked you never flash ota with twrp you should read before doing anything.
The only thing that can help is ofil.
I suggest you study well before trying it.
Click to expand...
Click to collapse
Oh boy. Thanks anyway. OTA flashed itself, couldn't stop it. Maybe I made it worse by trying to fix.
The bootloader is not locked according to the AIO tool. I can flash succesfully any firmware, only after flashing the phone will still boot in TWRP. It is strange it still boots in TWRP. Is there no simpler trick like flashing the standard recovery and then flashing OFW?
You mention Ofil; do you think the guide described here work?
Wortelstok said:
Oh boy. Thanks anyway. OTA flashed itself, couldn't stop it. Maybe I made it worse by trying to fix.
The bootloader is not locked according to the AIO tool. I can flash succesfully any firmware, only after flashing the phone will still boot in TWRP. It is strange it still boots in TWRP. Is there no simpler trick like flashing the standard recovery and then flashing OFW?
You mention Ofil; do you think the guide described here work?
Click to expand...
Click to collapse
Yes, that QFIL guide is for the x720.
In my opinion, the best way to return stock is to push update.zip into phones main folder, then install stock recovery, then in this one install update zip then check that OS is working. If it is, then go into twrp and wipe. Can't do it?
I'll mention myself;
https://forum.xda-developers.com/le-pro3/how-to/guide-simple-to-return-to-stock-x720-t3618658
marik1 said:
In my opinion, the best way to return stock is to push update.zip into phones main folder, then install stock recovery, then in this one install update zip then check that OS is working. If it is, then go into twrp and wipe. Can't do it?
I'll mention myself;
https://forum.xda-developers.com/le-pro3/how-to/guide-simple-to-return-to-stock-x720-t3618658
Click to expand...
Click to collapse
If he was just going back stock that would work he flash 28s ota with twrp so this will not work.
Sent from my LEX720 using xda premium
No brick after OFW push 28s
The pushed (unvoluntary) update didn't brick my phone after all. This may be important for those that have modified stock ROMs with TWRP.
Not being able to restore OFW was a bug in Mauro's All-in-One tool which he fixed last night. After I could easily flash 20S or 26S stock from his repository. I would also recommend this as safest/easiest procedure. Afterwards you can just flash TWRP from the same tool and move from there.
By the way, immediately after flashing 20s the FW notified it wanted to update itself, again!
n my opinion, the best way to return stock is to push update.zip into phones main folder, then install stock recovery, then in this one install update zip then check that OS is working. If it is, then go into twrp and wipe. Can't do it?
Click to expand...
Click to collapse
Might have tried that
Hello all,
I had my XT2 for some time now. I was installing the update flash via TWRP. When I rebooted it just showed the navigation buttons along a black screen. Thinking I did something wrong I flashed back to the stockxperience rom. Now the the phone just hangs on boot for 20 seconds, goes to the AT&T logo then shuts off and reboots to stock recovery. Here's a video showing the issue. I am able to get into fastboot and TWRP. Any help would be greatly appreciated.
youtu.be/CreFXUGolIs
gumpotaku said:
Hello all,
I had my XT2 for some time now. I was installing the update flash via TWRP. When I rebooted it just showed the navigation buttons along a black screen. Thinking I did something wrong I flashed back to the stockxperience rom. Now the the phone just hangs on boot for 20 seconds, goes to the AT&T logo then shuts off and reboots to stock recovery. Here's a video showing the issue. I am able to get into fastboot and TWRP. Any help would be greatly appreciated.
youtu.be/CreFXUGolIs
Click to expand...
Click to collapse
you can't take updates on a rooted phone with TWRP installed
you can return your phone to stock and take the update or you can flash one of my roms with the update applied
files are here > https://androidfilehost.com/?w=files&flid=266256
If you already flashed the B130_update Stock rom do the factory reset from stock recovery and your phone should boot up
If not you can flash the dload/update.app with stock recovery
clsA said:
you can't take updates on a rooted phone with TWRP installed
you can return your phone to stock and take the update or you can flash one of my roms with the update applied
files are here > [removed because of ten post rule]
If you already flashed the B130_update Stock rom do the factory reset from stock recovery and your phone should boot up
If not you can flash the dload/update.app with stock recovery
Click to expand...
Click to collapse
How do I go about with dload install?
Edited to say that I used one of your CleanRoms with the update applied initially, that lead me to the blank screen with the navigation buttons at the bottom. I then flashed the StockXperience Rom because that what I had originally. I have reason to believe I have corrupted some partition with all this flashing
gumpotaku said:
How do I go about with dload install?
Edited to say that I used one of your CleanRoms with the update applied initially, that lead me to the blank screen with the navigation buttons at the bottom. I then flashed the StockXperience Rom because that what I had originally. I have reason to believe I have corrupted some partition with all this flashing
Click to expand...
Click to collapse
you can't go directly to the B130 CleanRom
you have to update your firmware with the B130 Stock rom first then flash the CleanRom
the StockXperience rom is B120 and is not mine
clsA said:
you can't go directly to the B130 CleanRom
you have to update your firmware with the B130 Stock rom first then flash the CleanRom
the StockXperience rom is B120 and is not mine
Click to expand...
Click to collapse
I was giving as much info as possible to help you help me, but I figured that's what I need to do. next question is how do I install via the dload method?
gumpotaku said:
I was giving as much info as possible to help you help me, but I figured that's what I need to do. next question is how do I install via the dload method?
Click to expand...
Click to collapse
instructions are in the zip you can also look here > https://forum.xda-developers.com/showpost.php?p=76902495&postcount=86
clsA said:
you can't go directly to the B130 CleanRom
you have to update your firmware with the B130 Stock rom first then flash the CleanRom
the StockXperience rom is B120 and is not mine
Click to expand...
Click to collapse
clsA said:
instructions are in the zip you can also look here > [removed for ten post rule]
Click to expand...
Click to collapse
I got it working late this morning. I did everything right in the CleanRom install EXCEPT flashing Magisk via TWRP. Thanks again m8!
I highly recommend clsA's work. Nothing against StockXperience ROM but I could never get it to work properly. CleanRom(clsA) has worked since the first time I tried it and has gotten me out of more than one sticky situations.