Code:
/*
* Your warranty is now void.
*
* I will not accept responsibility for any adverse effects to your device,
* including, but not limited to: bricking, dead SD card, bootloops etc.
*
* You mod your device at your own risk.
*/
INTRODUCTION
I picked up the work that @Schischu and @malosasha have done and plan on improving it with the work i have done on the lineage base.
DOWNLOAD
aosp-klimtwifi.deadman.20170326.215802.zip
OLDER DOWNLOADs
aosp-klimtwifi.deadman.20170309.161721.zip
GAPPS
Use OpenGapps
OTA - UPGRADES
They are not supported you will need to manually flash updates
PREREQUISITES
TWRP 3.0.0 or higher. I always use @ashyx newest builds (TWRP builds by @ashyx)
You must be on a lollipop or newer bootloader this can be done by either flashing 5.0.2/6.0.1 stock rom or by flashing a zip in odin
Don't skip this step! If the incorrect bootloader is used your device WILL NOT BOOT!
INSTALLATION INSTRUCTIONS
First time flashing the rom on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash AOSP
Install the Google Apps addon package (Optional)
Reboot
CURRENT CHANGELOG
3/26/2017
I have updated the kernel source to be lollipop based which includes lots of misc fixes and improvements
I have pulled parts of the M kernel source in (netfilter intercepter, wifi drivers)
Changed to the LineageOS based liblights, powerhal, consumerir
Removed hwtest
Removed double tap to wake (Was buggy and kept the touchkey lights on after sleeping)
Removed colortone (Was buggy and i will implement a better solution later)
misc other changes
OLDER CHANGELOGS
3/09/2017
These are the changes i have done since forking the source from @Schischu and @malosasha
Removed a ton of under the hood hacks and fixed them properly (Shim blobs instead of editing the source to support them, Add mmap support, Fix the wifi state machine instead of disabling ip reachability, etc)
Removed a bunch of proprietary blobs that were not needed (Builds are now 11mb's smaller)
Updated the drm blobs to a newer version from bullhead
Added memtrack support from the newer 5422 based bsp that we use on lineage
Fixed mtp host fc on first boot
Fixed video recording
Updated the prebuilt omx blobs
Made the QS menu bigger to be inline with lineage
ISSUES
HD Video stutters
More that i may have missed
SOURCE CODE
Manifest
Kernel
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
[ROM][AOSP 7.0] SM-T700, ROM for the Samsung Galaxy Tab S
Contributors
deadman96385
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Beta
Created 2017-03-10
Last Updated 2017-03-10
Reserved
Reserved
Thank you, thank you, than you. I have been waiting for this.
Wool be flashing shortly.
Great TY @Deadman waiting AOSP 7.1.2 for T800 Good Luck :good:
Thank you. I been waiting for SM-T805.
thanks deadman. i appreciate all the variations in roms your giving us for the T700. have a good day
Having trouble getting Viper to work with this and the latest LD build. I'll see if I can figure it out, but I thought I would post in case anyone else has already had a solution. If I find it first, I'll post in both threads.
I really hope you could make it for T705 sir
I really love the pureness and simplicity of AOSP
Thanks for keeping this tablet alive. Installation went well. Same SD card problem so I'm now a set up as portable storage. MTP host FCs whenever SD card browsing is attempted.
Battery life seems to be same as MM.
Is this better/more stable than your ASOP 7.1.1 ROM?
Pingu_3D said:
Thanks for keeping this tablet alive. Installation went well. Same SD card problem so I'm now a set up as portable storage. MTP host FCs whenever SD card browsing is attempted.
Battery life seems to be same as MM.
Is this better/more stable than your ASOP 7.1.1 ROM?
Click to expand...
Click to collapse
I haven't seen a 7.1 AOSP ROM for the T700. Do you have a link?
Maybe should have said 'based on' AOSP. I think it said that in the description.
New build in OP
I have updated the kernel source to be lollipop based which includes lots of misc fixes and improvements
I have pulled parts of the M kernel source in (GPU driver, netfilter intercepter, wifi drivers)
Updated the GPU driver to the M based one
Changed to the LineageOS based liblights, powerhal, consumerir
Removed hwtest
misc other changes
Build pulled do to some reboot issues
HD Video works fine (does not stutter)
FYI. This ROM installed and runs great on my SM-T700. I did have to install SuperSU, Open GAPPS and Titanium Backup separately (install one at a time and reboot to system after each install) instead of stacking them. But no big deal.
The main thing I want to say is the HD video plays just fine and does not stutter as stated in the intro list of issues. I've tried it on MX Player, Google Play Movies & TV, DirecTV and Showtime Anytime. I did have problems with the prior ROM versions playing any video on some of those Apps.
Thanks Deadman
New build in OP:
I have updated the kernel source to be lollipop based which includes lots of misc fixes and improvements
I have pulled parts of the M kernel source in (netfilter intercepter, wifi drivers)
Changed to the LineageOS based liblights, powerhal, consumerir
Removed hwtest
Removed double tap to wake (Was buggy and kept the touchkey lights on after sleeping)
Removed colortone (Was buggy and i will implement a better solution later)
misc other changes
I was planning to update to the M gpu driver but it is causing issues for now.
Unfortunately, I seem to get a bootloop on dirty flash. Haven't got the time to try clean flash at the moment unfortunately. Not sure if it's a problem with me or the rom. Waited for about 10 minutes but still sitting on Google animation.
franzli said:
Unfortunately, I seem to get a bootloop on dirty flash. Haven't got the time to try clean flash at the moment unfortunately. Not sure if it's a problem with me or the rom. Waited for about 10 minutes but still sitting on Google animation.
Click to expand...
Click to collapse
What room did you cone from? Did you just upgrade f from the previous build or did you cone from a different base?
amateurhack said:
What room did you cone from? Did you just upgrade f from the previous build or did you cone from a different base?
Click to expand...
Click to collapse
From the previous AOSP build by deadman from early March. I had, however, dirty flashed to that from the last build of the previous AOSP ROM from November, which didn't cause any problems.
franzli said:
From the previous AOSP build by deadman from early March. I had, however, dirty flashed to that from the last build of the previous AOSP ROM from November, which didn't cause any problems.
Click to expand...
Click to collapse
Thanks. That's good to know. I'm on AOKP right now, but I still have the .zip from that earlier build. I'll try to test this tonight.
deadman96385 said:
I have posted my t700 thread in the future i will expand the thread to have builds for the other variants (T705, T800, T805) minus T807T. But it will be staggered release because i do not have infinite time.
https://forum.xda-developers.com/galaxy-tab-s/development/rom-sm-t700-t3570515
Click to expand...
Click to collapse
Can i use [ROM][AOSP 7.x] SM-T700 for my SM-T805, or i have to wait for SM-T805 ROM-Version?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is not void.
*
* I am not responsible for bricked devices,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
What is XOSP and how was it born?
XOSP stands for the Xperia Open Source Project. The project was initially created by me (@nilac) for the Galaxy S+ (my old device) years ago. Back then the ROM was called S+ Reborn. The vision was to create a minimal bloat free ROM which included Sony Xperia specific apps and various tweaks users would expect from a custom ROM.
S+ Reborn became a success and was eventually ported to different devices so from there I rebranded and XOSP project was founded. I worked on the project for 2 years always trying to improve it. Eventually, Because of the fact Lollipop was buggy on my Galaxy S+ (Which I maintained xosp for at the time) I decided to take a break from development until I got my hands on the Zenfone 2 in 2015 and from then I started again the development of XOSP and continued it ever since.
What Represents a Release and what represents a Revision?
Revisions include small changes such as bug fixes/improvments etc.. (Usually there are made like 3 revisions per-release).
Releases are the main "stable" builds with all new planned features implemented and bugs fixed.
You can find all the included features right:
Here
You can find the list of current issues in the ROM right:
Here
Not able to disable navigation button backlit(5 sec default) - Using soft buttons solves the issue.
First time installing XOSP on your OnePlus3, or coming from another ROM?
Make sure your Bootloader is unlocked and you're running the latest TWRP
Download latest build,XOSPApps and GApps
Reboot recovery
Wipe data factory reset
Flash latest XOSP
Flash GApps
Flash XOSPApps (Optional)
Reboot
Upgrading from earlier release or revision of XOSP:
Reboot recovery
Flash latest XOSP
Flash GApps if necessary
Flash XOSPApps (Optional)
Wipe cache and dalvik
Reboot
XOSPSite
XOSP DownloadCenter
XOSP Jenkins Server
XOSP Sources
XOSP Devices Sources
Build XOSP for your device!
G+ Community
FB Page
XOSP Channel on Telegram
XOSP Community Group on Telegram
OnePlus3 XOSP Builds on XOSP DownloadCenter
XOSPApps
GApps (I suggest you to use the Mini package)
ROM sources
ROM devices sources
Device: OnePlus3 sources
Kernel: OnePlus3 sources
Vendor: OnePlus propietary
@nilac and XOSP Team
CyanogenMod for the base sources
Sony and the Xperia Community
Resurrection Remix Team
AICP Team
@malybru for the XOSP banner
Mihir Mistry for the XOSP logo
XDA:DevDB Information
XOSP ROM, ROM for the OnePlus 3
Contributors
jithumon
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 7.1
Stable Release Date: 2016-12-25
Created 2016-12-25
Last Updated 2017-01-31
Screenshots
Screenshots
Reserved
First
Nice to see new rom and looking good.
What firmware you suggest to use and is substratum working ?
tadessi said:
Nice to see new rom and looking good.
What firmware you suggest to use and is substratum working ?
Click to expand...
Click to collapse
Frimware suggested is OOS 3.2.8 & yes, legacy is working.
Nice
is root included?(built in root) or have to flash it
and does it support F2FS
Would love to try it but sadly can't complete the download, trying for over 2h yet it keeps disconnecting me and the transfer rate is about 100kbps
Seems pretty smooth so far, but what's with the persistent su icon on the notification bar?? Pretty annoying.
Will see how this works as a driver and look forward to future development!
teddy74eva said:
Would love to try it but sadly can't complete the download, trying for over 2h yet it keeps disconnecting me and the transfer rate is about 100kbps
Click to expand...
Click to collapse
Just downloaded it from their site, took around a minute with a 10mbps stable connection.
teddy74eva said:
Would love to try it but sadly can't complete the download, trying for over 2h yet it keeps disconnecting me and the transfer rate is about 100kbps
Click to expand...
Click to collapse
Downloading is working fine here.
theduke7 said:
is root included?(built in root) or have to flash it
and does it support F2FS
Click to expand...
Click to collapse
Yes. It has root by default. No F2FS support for now.
bay91 said:
Seems pretty smooth so far, but what's with the persistent su icon on the notification bar?? Pretty annoying.
Will see how this works as a driver and look forward to future development!
Click to expand...
Click to collapse
SU icon or Super User icon? If Super User, flash SU.
Let's just say persistent hash tag.
Not found a reason after hours of looking thru the settings
Here's the. Example, next to the network meter
No-one has asked the question yet... how is GPS for people who have flashed this good looking ROM?
Can't ans GPS query.Sry ..but if oms could be added you got another DD for the op3. Imho
Sent from my OnePlus Pixel using XDA Labs
bay91 said:
Here's the. Example, next to the network meter
Click to expand...
Click to collapse
That's because of the built in root, flash SuperSU 2.79 if you want to get rid of it.
hiredantispammer said:
That's because of the built in root, flash SuperSU 2.79 if you want to get rid of it.
Click to expand...
Click to collapse
Thanks. Seems you also have to disable in built root under the Dev settings as well
---------- Post added at 09:01 AM ---------- Previous post was at 08:57 AM ----------
L22EEW said:
No-one has asked the question yet... how is GPS for people who have flashed this good looking ROM?
Click to expand...
Click to collapse
GPS is a bit iffy. I'm currently on the motorway. Whilst the lock is quite fast accuracy is off. It says I'm driving through fields alongside the motorway! Lol. This is thru Google maps.
Personally I don't use GPS on the phone that much but potentially something that needs a bit more of a look
GPS is a bit iffy. I'm currently on the motorway. Whilst the lock is quite fast accuracy is off. It says I'm driving through fields alongside the motorway! Lol. This is thru Google maps.
Personally I don't use GPS on the phone that much but potentially something that needs a bit more of a look
Click to expand...
Click to collapse
This is on every OP3 CM ROM. So far Xenon only ROM I can deal with, no field driving per-say, but I'd look like a race car warming it's tires if I mimicked the icon on mine! lol - I use it almost 8 hours a day!
jithumon said:
Downloading is working fine here.
Yes. It has root by default. No F2FS support for now.
SU icon or Super User icon? If Super User, flash SU.
Click to expand...
Click to collapse
ROM works great with f2fs only bug I have found Alert Slider does not work for me
Lineage OS for the Samsung Galaxy S4 Active (International)
Brought to you by the
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CHECK OUR ROMS ON OUR NEW WEBSITE
HOW TO BUILD
Considering that I'm a student, I will not have many time for building. Everything is open source, so you can build it by yourself.
Building is not difficult at all, but the guides on XDA are almost everytime uncomplete or wrong. I made a step-by-step (from setting up your machine to the building process itslef) N00bproof Guide on How To Build any CM14.1 or CM14.1 Based. You can find it on XDA or on my Github Page
Code:
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
* A lot. A very lot. MUAHAHAHAHAH (ok I'll stop).
FEATURES
Faster than a rocket!
Based on LineageOS - Android 7.1.2 Nougat
OMS support
SIDE kernel - heavily optimised for SD600 devices
Compiled with Linaro 4.9
F2FS support
DOWNLOAD
LOS: AFH (Latest is 3 March build)
Builds by @tsvetkov_vlad: Post #725. Remember to thank him! (Latest is 29 June build)
Check out the full changelog in the post below.
INSTALLATION
Not a big deal. Boot into TWRP
Make backup
Wipe system, data, cache, dalvik
Install the LineageOS-14.1-xxx.zip
Reboot and enjoy
BUGS
In the initial build, Bluetooth and RIL were gone. Fixed from 2 Jan's build.
Nothing else (seems). Tell me
CONTRIBUTORS
Well, the best part is here, of course.
This would never be possible without:
- @zagi988, member of JactiveLTeam
- of course, the modified sources and the help of @pchatzop. A great man and a real friend
- the HUGE help of @matteo0026
- the entire JDCTeam
- @tsvetkov_vlad for his tweaks and his help
- LineageOS, of course
- CyanogenMod (Rest in peace)
XDA:DevDB Information
LineageOS 14.1, ROM for the Samsung Galaxy S4 Active
Contributors
LuckyNuke1310, pchatzop, tsvetkov_vlad, @zagi988, @side and the entire JDCTeam
Source Code: https://github.com/JactiveLTEam
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest Modem and Bootloader
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2017-09-20
Beta Release Date: 2017-02-14
Created 2016-12-30
Last Updated 2018-06-29
SCREENSHOTS:
Actually, there is also a section just for them
CHANGELOG:
If you'd like to see the full changelog, check out our Kernel, Device Configuration, JF Common Device Configuration, Vendor, Bluetooth, ANT and even the Setting App repos commits.
29 December: First build, so...
02 January: Fixed Bluetooth and RIL
19 January: Built with LineageOS sources
11 February: Reverted to stock LOS, added OMS support
14 February: Experimental build with Side kernel
22 February: February security patches, increased speakerphone volume (thanks to @masteroftech) & volume regulator steps
28 February: Fixed menu button assigment in Settings->Buttons
08 March: March security patch, Microphone Fix
yeahey im the first one downloading this
yeahey
downloading...
thanks downloading!!!1 i speak spanish ... not speak english (?) muchas gracias!!! te lo agradezo un monton, lo estoy descargando...:RE:RE:risa::dedos cruzados::bueno:
Can you enable cwm recovery, twrp doesn't work on me i don't no why its says unmodified system partition
marcarevavlo_14 said:
Can you enable cwm recovery, twrp doesn't work on me i don't no why its says unmodified system partition
Click to expand...
Click to collapse
CWM doesn't work very well on N. Reflash TWRP and mount system partition
Great job, waiting the next build with ril big fix ?
Thanks
The sim card does not work and the system goes to few fps, please fix it. Thank you! happy New Year friend!
galaxyord said:
The sim card does not work and the system goes to few fps, please fix it. Thank you! happy New Year friend!
Click to expand...
Click to collapse
I wrote it in the bug list. I'm currently working for fixing it
Biggest deal is that SIM card is not working. Otherwise, it seems like it could be a "test daily" ROM.
Good job!
Hi! Thanks your job! Sim card and wifi not working. I wait next release.
zsomlee said:
Hi! Thanks your job! Sim card and wifi not working. I wait next release.
Click to expand...
Click to collapse
Wi-fi works. Anyway I'm building another time today. I'm not sure RIL and Bluetooth will be fixed, but I hope so
zsomlee said:
Hi! Thanks your job! Sim card and wifi not working. I wait next release.
Click to expand...
Click to collapse
Reboot and wifi work, i have the same problem
Hey everyone! Hope you're enjoying 2017!
Anyway, I've got good news and bad news.
The good one is that Bluetooth now works (thanks again to @pchatzop)
The bad one is that RIL is still broken. I'm still trying to understand the issue, but I wasn't lucky till now. I'm currently rebuilding with some small changes, but I think it will not solve the problem.
It looks like this is the last bug, and I'm sad I still didn't fix it.
Let's see...
I took a look at your local manifest, and i missed something critical (i feel bad at myself for missing it). You have not included vendor/samsung/jf-gsm-common from themuppets! That is the sole reason ril does not work! I am unfamiliar with the opt-cm14.1 sources, therefore if it is included in the first init script, try deleting the original vendor dir and using the one from themuppets. You can even try pasting all the blobs under /proprietary to your /system partition and it would probably work as is. Give it a try and report back. Meanwhile, i will get a new build trying to fix bluetooth for users that would prefer vanilla cm sources and the customization of RR. Hope it wont fragment the thread a lot.
thank you for the great job...hope you can fix the bluetooth and the sim card issue asap.. and i will start testing as this is my main device can't live without them
Here is my new RR build: https://mega.nz/#!FsBghDra!YSR1djkMBNixjZ1Um6b0-uEM5jRlAOr4TSXOJUSK8zg Please keep the bug reports to a minimum, as to not need a new thread for it. I hope to just help LuckyNuke build any rom he wants without bugs, since he is the one that own the phone and not me.
This build is based on straight cm(lineageos) sources with some adaptations for the s4 active, not optimized jfltexx sources.
pchatzop said:
Here is my new RR build: https://mega.nz/#!FsBghDra!YSR1djkMBNixjZ1Um6b0-uEM5jRlAOr4TSXOJUSK8zg Please keep the bug reports to a minimum, as to not need a new thread for it. I hope to just help LuckyNuke build any rom he wants without bugs, since he is the one that own the phone and not me.
This build is based on straight cm(lineageos) sources with some adaptations for the s4 active, not optimized jfltexx sources.
Click to expand...
Click to collapse
Linked your post in the OP.
Oh, and building with jf-gsm-common right now
Thanks for everything you do for this community
New build! (02 Jan)
Bluetooth and RIL are now fixed
The ROM is super smooth and it seems there are no bugs at all. It's surely a daily driver.
Uploaded right now. Check the link in the OP
RR build is awesome, but my battery is being drained, I can not say for sure if it's my battery or if it's the rom, I'm going to go up to CM 14.1 and see if there is any difference in consumption, but overall RR is incredible, optimizations are extremely welcome, I hope new updates for these roms, certainly they are very much awaited by the community of S4 Active, since the phone has enough firepower to deal with the Nougat.
Congratulations on the great work @LuckyNuke1310 and @pchatzop
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CHECK OUR ROMS ON OUR NEW WEBSITE
HOW TO BUILD
Considering that I'm a student, I will not have many time for building. Everything is open source, so you can build it by yourself.
Building is not difficult at all, but the guides on XDA are almost everytime uncomplete or wrong. I made a step-by-step (from setting up your machine to the building process itslef) N00bproof Guide on How To Build any CM14.1 or CM14.1 Based. You can find it on XDA or on my Github Page
Code:
[SIZE=3]I am not responsible if you brick your devices or other issues.
Do some research if you have any concerns about features in.
[COLOR="Blue"]Feature requests are always welcome and if you have a Github commit,
that'll be a plus but report a bug without logs and I'll simply ignore them.[/COLOR][/SIZE]
About Resurrection Remix ROM
Resurrection Remix has been based on CM, slim, omni and original Remix ROM builds which creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device
Credits
LOS, RR, OMNI, SLIMROMS, crDroid, TeslaRom, AICP Teams, and of course to all the supporters
Huge thanks to @side for his kernel sources, @pchatzop and @zagi988 for their great help and @tsvetkov_vlad for his massive work
Main Features
All the RR customizations and bla, bla, bla... These ROMs are always more the same sh*t
Download
My AndroidFileHost - Latest build is 18 June. Latest Side build is 30 June.
Bruno's Google Drive - Latest build is 11 August.
Check out the changelogs in the post below
Installation Instructions
- Download the latest build
- Download Gapps
- Recommended (not mandatory) - Take a nandroid backup
- Recommended - Full wipe and factory reset
- Flash the downloaded Rom.
- Restart and boot into the system and then restart again into recovery.
- Flash Gapps and other zip you would want to flash.
- Enjoy!
XDA:DevDB Information
Resurrection Remix OS, ROM for the Samsung Galaxy S4 Active
Contributors
LuckyNuke1310, zagi988, side
Source Code: https://github.com/JactiveLTEam
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest Modem and Bootloader
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2017-08-11
Beta Release Date: 2017-06-30
Created 2017-01-20
Last Updated 2017-10-08
RR Changelog
Changelog
LOCAL CHANGELOG
If you'd like to see the full changelog, check out our Kernel, Device Configuration, JF Common Device Configuration, Vendor, Bluetooth, ANT and even the Setting App repos commits.
20 January: First build with LineageOS sources
10 February: Updated to 5.8.1, OMS support
11 February: Fixed camera reverting blob commits
17 February: First build with side kernel and STweaks support
20 February: Updated to 5.8.2, reverter to jf kernel
23 February: Fixed SIM bug && ThermalEngine error
27 February: February security patches, fixed dialer fc
12 April: Quiet "KERNEL IS NOT SEANDROID ENFORCING" boot message, security patches from LOS team
9 May: Updated to 5.8.3, side kernel, May security patch, Wifi bug fixed
18 June: June security patch, updated LineageOS sources, kernel CVE fixes
11 August: Updated to 5.8.4, August security patch
SCREENSHOTS
Thanks to @THEVAN3D for the Screenshots
Actually, there is a section just for them
Ok, so... I've installed the ROM on my phone.
Everything works and these are the "bugs" that I've noticed after short testing:
1. Wi-Fi works when you shut down your phone after first boot and turn it back on
2. Camera recording works fine, records properly but in app (Camera app) recording (preview) is 4:3 and pixelated. Final video looks great.
3. Nothing more so far... will be thoroughly testing it in a few days...
Downloading!
Unfortunately I can't get the wifi to work. I've tried clean installing twice and rebooted several times after first boot but still no wifi.
Hope for a fix in the near future as it seems to be a great rom.
badadam said:
Unfortunately I can't get the wifi to work. I've tried clean installing twice and rebooted several times after first boot but still no wifi.
Hope for a fix in the near future as it seems to be a great rom.
Click to expand...
Click to collapse
Flash latest modem and bootloader
Moletdaniel said:
Downloading!
Click to expand...
Click to collapse
i tried it yesterday and no app works properly ... they closed unexpectedly, the videos were not played and no browser worked.
Moletdaniel said:
i tried it yesterday and no app works properly ... they closed unexpectedly, the videos were not played and no browser worked.
Click to expand...
Click to collapse
Really? Zagi didn't tell me. Did you dirty flashed over LOS or any other ROM?
Could you add RR build instructions to your noob proof guide, please?
LuckyNuke1310 said:
Flash latest modem and bootloader
Click to expand...
Click to collapse
Ok, I'll give it a try in a few days. Thanks
..... And just to be right on track, I do this by flashing the latest official firmware from sammobile.com? And it can be flashed in TWRP?
LuckyNuke1310 said:
Really? Zagi didn't tell me. Did you dirty flashed over LOS or any other ROM?
Click to expand...
Click to collapse
i came from MIUI 8, i wipe everything except internal sd (Sorry for my bad english )
I hope an update, I would like to use it
badadam said:
Ok, I'll give it a try in a few days. Thanks
..... And just to be right on track, I do this by flashing the latest official firmware from sammobile.com? And it can be flashed in TWRP?
Click to expand...
Click to collapse
Yes, the latest firmware from Sammobile. Unfortunately not, you have to put phone into Download Mode and flash it. Then you'll be completely stock. Flash TWRP, and from there ROM and SuperSU
Moletdaniel said:
i came from MIUI 8, i wipe everything except internal sd (Sorry for my bad english )
I hope an update, I would like to use it
Click to expand...
Click to collapse
I asked him to reflash, and he told me everything works. Did you follow the installation procedure?
LuckyNuke1310 said:
Yes, the latest firmware from Sammobile. Unfortunately not, you have to put phone into Download Mode and flash it. Then you'll be completely stock. Flash TWRP, and from there ROM and SuperSU
I asked him to reflash, and he told me everything works. Did you follow the installation procedure?
Click to expand...
Click to collapse
Cool! Thanks for your help!
Ok, after testing it for a day... Camera on RR is broken too. "Can't connect to the camera" after taking a few shots, closing the app and opening it again.
Also, Wi-Fi sometimes won't work after a reboot so we need to turn off the phone, wait 15 sec and turn it on again...
Everything else is lightning fast.
We'll see what we can do...
yes,i see. same peoblems with camera.
I have to try it yet, but if it is buggy only on the camera app - and not the ROM itself - it is simple: just delete the standard camera app and install any third-party that works fine. Isn't it just the case?
I have just tested the ROM myself. The problem seems to be the Snap Camera and some versions of Google Camera. Others work fine
hey lucky good job working on this awesome build ... but i had the @pchatzop version that you posted on the optimized thread for more than 2 weeks now and it's working fine ... is this one any different ?? any changelog ??
also can i dirty flash it over pchatzop one ? or do i need to make a clean install ?
MiZoSpaDe said:
hey lucky good job working on this awesome build ... but i had the @pchatzop version that you posted on the optimized thread for more than 2 weeks now and it's working fine ... is this one any different ?? any changelog ??
also can i dirty flash it over pchatzop one ? or do i need to make a clean install ?
Click to expand...
Click to collapse
Well, actually I don't know. I didn't try it, as well as this build. My main device is a OnePlus 3, so I cannot test them so often. Anyway, looks like my version has some bugs. Don't know if they also are in pchatzop build, instead if you can please test and report (after a nandroid backup)
.
.
.
.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICPAndroid Ice Cold Project
AICP is known by everyone as Ice Cold Project that started on Desire HD and since then evolved into a mature ROM with the BEST community you can find!!!
Until Lollipop, Rom has always been AOKP based. Unfortunately, since AOKP either stopped development or will make a comeback later this year, we changed our base to CM when it comes to hardware, drivers and some features.
If there are any bugs, either we will sort them or CM team if it concerns their modifications. This rom isn't CM supported so no need to report errors or bugs to them!!
.
.
.
.
.
In the beginning we would like to thank:
LineageOS & CM (R.I.P.) team
maxwen
DU team
SlimRoms team
CarbonRom team
LiquidSmooth rom team
OmniRom team
Community
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@Drgravy
@Hashbang173
@SpiritCroc
@wartomato
@eboye
.
.
.
We are now paying for servers that build nightlies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Download link: Chagalllte AICP 12.1
Full Changelog link: goo.gl/mIgmYG
Due to the GPU driver being updated Hearthstone and other Unity games now run perfectly without the need to enable 4x MSAA in dev settings.
The following CPU Governors have been added:
LionHeart
Adaptive
Wheatley
Dance Dance
Intelliactive
Nightmare
PegasusQ
Lazy
Darkness
What is broken?
fingerprint
you tell me
GAPPS:
OpenGApps ARM 7.0
ROMS should contain everything you need to enjoy N. You are not required to install any Add Ons, simply download the latest ROM, gapps, flash it, and go!
You are STRONGLY recommended to fully wipe your device before flashing, and if possible avoid restoring system apps and system data with Titanium Backup - these can cause stability issues that are very hard to debug. If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience strange behavior.
Addition for installing root on builds after 17/06/14:
CHANGES (READ THIS BEFORE FLASHING!)
==========================================
YES. AICP is going to build rootless builds.
This change will happen during a short period of time.
I could explain the decision for that,
but that would not be understandable for all users, so i put it this way...
Going rootless means that the ROM will NOT come with any Root or SU built in anymore.
There will be no Magisk - as a buildin root solution - be provided when the user flashes the ROM zip file.
What you will have to do (If you don't do it by now):
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You will have to flash a root solution of your choice (lineage-su addon, SuperSU or Magisk) by yourself after the ROM.
I will link the appropriate solutions here in this post.
REMEMBER:
First flash the ROM, then your desired root solution!
This MUST also be done on every dirty flash to ensure root is not lost!
This MUST be done, when using the OTA app too! Just add the "root" zipfile after the ROM!
What will be noticeable to the user:
~~~~~~~~~~~~~~~~~~~~~~~~~~
1. We had to cut out some features for getting this done. Those are:
a. The SELinux switch in the dev options is gone for now.
This can also be done by other apps, if necessary.
b. The feature to flash another bootanimation from AICP Extras is gone.
You can still use a flashable ZIP from TWRP or Substratum.
c. The builtin logcat feature in AICP Extras will be gone.
Most users did not use it either as it only can store max. 400KB.
We already advised to use Catlog or Syslog Apps (both free on Play store).
Remember that both need root!
d. The builtin "System app remover" will be gone, as it required root to run.
2. You will, of course, not see Magisk Manager in the app folder, of course.
3. Remember that without a root solution some other apps e.g. Kernel Audiutor will also not work.
Whatever you choose. Lineage SU options are in dev options in settings. The others use separate Apps.
Links to tested root solutions (download from the thread):
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Magisk (remember that v12 need the Manager to be flashed separately. v13 will have it buildin the flashable ZIP:
Magisk Official
Magisk beta
SuperSU (Use whatever works for you, stable or beta):
SuperSU stable
SuperSU beta
Lineage SU-addon (check your needed version 14.1 arm or arm64!):
LineageOS su-addons for 14.1
-> the removal zip is available here too.
T.
XDA:DevDB Information
[ROM][7.x N][OFFICIAL] AICP 12.1 for SM-T805, ROM for the Samsung Galaxy Tab S
Contributors
thermskin, deadman96385
Source Code: https://github.com/aicp
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Nightly
Created 2017-03-11
Last Updated 2017-03-11
Reserved
Reserved for stuff
Test builds
Build 11.03.
Changelog:
Sdcardfs has replaced fuse. 3 times faster read/write speeds!
New mali GPU driver (r7p0 from MM release, great performance!)
GPU OC up until 600mhz with the new driver
Few fixes to the gpu driver
Half of the camera HAL has been open sourced! (more stable, better support)
Camera media sharing works properly now (Instagram, Snapchat, etc)
Wifi Stability fixes
The Samsung Power HAL has been fixed (more responsiveness without compromise)
March security upgrade applied
Clean install is needed !!!
Bugs:
Enabling/disabling navigation bar ends in reboot
Fingerprint still broken
T.
Great. Good to have an own thread for it
Gesendet von meinem LG-H818 mit Tapatalk
System freeze
Hi @thermskin, I just installed (clean) build Sub oẑu? 11. While watching some Youtube video the system froze dead. It did not even react to adb. If it helps I attach last_kmsg.txt taken with deathly adiutor.
Otherwise I really like AICP and prefer it over Lineage because of the AICP specials. Keep it on..... :good:
Hans
Testing, so far so good =)
One thing I noticed is that I'm unable to switch between languages with any combination of buttons on bluetooth keyboard (samsung's KB).
I've dug around keylayouts for hours now, but can't figure out why ctrl+space won't actually switch between languages.
Here are my settings in keychars:
key SPACE {
label: ' '
base: ' '
alt, meta: fallback SEARCH
ctrl: fallback LANGUAGE_SWITCH
}
Click to expand...
Click to collapse
It enters space, but no language switch event happens. With keytest.apk I tested and made sure that both space and ctrl are sending events fine. Used to work OK in stock ROM, not sure what could be causing this.
----------
Edit: mobile data works, wifi works, both cameras are good.
However, definitely experiencing lag in response to many even basic navigation events like browsing settings, opening apps, etc. Very noticeable.
No mobile data . will try to install again
Thank you for the great Rom.
Any chance of this coming to T807? I tried it on my T807T and it hangs at the bootloader. That happens with Lineage 14.1 for T805 as well. Previous T805 roms have worked prior to 7.1.1
Perfect!
Just got my T805 today. Bought it on "ebay" for $150, real bargain. Gonna sell my T800 and earn a buck in the process haha!
Installing this rom now, ive been running AICP official on the T800 so I hope this port is as good as it is on T800.
Does this rom support NTFS formatted SD-cards?
Good rom
Thank you for a very very good rom:good::laugh:
I am the only one with Wi-Fi stability problems?
It randomly disconnects and sometimes my network disappears (despite being at 1 meter from my modem). My other devices don't seem to have this problem, and everything was working fine before flashing this ROM, so I must assume it's a bug with the ROM itself. I have resetted the modem just in case, but to no avail.
TheDeltaOrionis said:
I am the only one with Wi-Fi stability problems?
It randomly disconnects and sometimes my network disappears (despite being at 1 meter from my modem). My other devices don't seem to have this problem, and everything was working fine before flashing this ROM, so I must assume it's a bug with the ROM itself. I have resetted the modem just in case, but to no avail.
Click to expand...
Click to collapse
No problems here with wifi or mobile data. But I noticed that mobile data icon shows no bars even though I have a bad but still a connection .
Tablet reboots when if I turn on NAVBar and then try to disable NavBar. I managed to remove the navbar after changing it to Flingmode and then disable navbar. Tablet rebooted even then but at least it was gone after boot.
Tablet crashes and reboots when trying to make a phone call. Mobile data is working just fine, but I tried using my other simcard to make a real phone call, but the tablet just reboots.
I'd appreciate if you could add OMS support
sanskimost said:
I'd appreciate if you could add OMS support
Click to expand...
Click to collapse
Im an idiot, ignore this.
corb06 said:
Tablet crashes and reboots when trying to make a phone call. Mobile data is working just fine, but I tried using my other simcard to make a real phone call, but the tablet just reboots.
Click to expand...
Click to collapse
Same exact thing here. Can't make a phone call.
Downloading 3 April version right now. Thanks for developing AICP
25 April version is up!
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1.2 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
This thread is for Unofficial LineageOS 14.1 builds for klimtwifi (SM-T700) The following will not be supported here:
Custom kernels
Mods
Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Have not attempted a clean flash
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Install the Google Apps addon package (Optional)
Reboot
There will be a new build every week, every Monday.
The builds will no longer be personally tested by me before being uploaded (but everything will probably be fine)
Change logs will no longer be posted within every new build, but instead when the changes are uploaded to GitHub. I will try though to post changes for major bugs or fixes as they are released.
Some builds might feature only minor changes, ie. only updating the LineageOS source
Klimtwifi Download
Google Apps:
Beans GAPPS 7.1.2
Kernel
https://github.com/LineageOS/android_kernel_samsung_exynos5420
Device Tree
https://github.com/LineageOS/android_device_samsung_klimtwifi
Aytex, who made all of the banners on this post.
@Barracuda77777 (For helping along the way)
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits - the base @Barracuda77777 and @nvertigo67 started of from)
@eousphoros (for his device git)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
XDA:DevDB Information
LineageOS SM-T700, ROM for the Samsung Galaxy Tab S
Contributors
DarkExistence
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2019-04-19
Last Updated 2019-04-19
reserved
another
This too
One more
Lol, and I get this one... Thanks again for the T700 continuation.
Installation
How to Install md5sum ? is it needed ?
How to install this version if I have the official version installed?
Enviado desde mi MI 8 mediante Tapatalk
I just installed the latest version. To install it over the official version, it was necessary to let twrp do a factory wipe.
The ROM appears to work just fine, but I have a few questions:
-the ROM suggests to configure the fingerprint, but I can't get my finger recognised. Is the fingerprint supported at all? (If it isn't, it is no big deal. I just need to know.)
-a new app called "Deathly Adiutor" is installed by default. Apparently, it is set up to manage the exynos processor. Do people use it and how?
Installation
jerome_m said:
I just installed the latest version. To install it over the official version, it was necessary to let twrp do a factory wipe.
The ROM appears to work just fine, but I have a few questions:
-the ROM suggests to configure the fingerprint, but I can't get my finger recognised. Is the fingerprint supported at all? (If it isn't, it is no big deal. I just need to know.)
-a new app called "Deathly Adiutor" is installed by default. Apparently, it is set up to manage the exynos processor. Do people use it and how?
Click to expand...
Click to collapse
Do I have to Install md5sum file ?
No, you don't need to install the md5sum file. You can use it, and then the rom is checked for tampering, but it is not compulsory.
Performance
jerome_m said:
No, you don't need to install the md5sum file. You can use it, and then the rom is checked for tampering, but it is not compulsory.
Click to expand...
Click to collapse
Does the Tab s get better performance from these updates ? as i was thinking of leaving my last official update if there
is no Performance gain .Let me know Thanks .
I did not feel much difference, but I am not a power user.
jerome_m said:
Apparently, it is set up to manage the exynos processor.
Click to expand...
Click to collapse
In what way, does anyone know? Speeding it up? (That would be cool!)
Legsmaniac said:
In what way, does anyone know? Speeding it up? (That would be cool!)
Click to expand...
Click to collapse
It is a kernel editor, you can edit clock speeds etc. It is developed by us (Exynos5420 team). It could not be on the official builds due to Lineage restrictions with pre-installed apps.
Please use it ONLY if you know what you are doing though
Thanks @DarkExistence for the contribution and continue with the ROM, my tablet revives now. I am testing it and at the moment it works very fine, only small lags in some transitions (build 20190420)
Thanks for building!
Please let me know if you need some specific testing and reporting scenario.
I tried to install latest unofficial release to my SM-T700 with the official samsung 6.0.1 release installed, with unlocked bootloader, last TWRP and rooted but can't boot, remains at the LineageOS logo. Official LineageOS installs without any issues. I also tried with older TWRP and unofficial releases with no success. Before the installation I did a factory reset and format data. Any help is really appreciated.
Thanks
nikkarat said:
I tried to install latest unofficial release to my SM-T700 with the official samsung 6.0.1 release installed, with unlocked bootloader, last TWRP and rooted but can't boot, remains at the LineageOS logo. Official LineageOS installs without any issues. I also tried with older TWRP and unofficial releases with no success. Before the installation I did a factory reset and format data. Any help is really appreciated.
Thanks
Click to expand...
Click to collapse
Hm, installs fine for me. I assume by factory reset you mean the relevant trigger in twrp? Maybe try regularly wiping dalvik, data, system and cache in twrp (sounds like you might not have wiped the system partition, as a factory reset leaves that untouched)
Finally got around to giving this a try after backing up Official.
Fully wiped/formatted prior to install which went without a hitch.
Then I found I had problems with GPS not connecting.
Since this is my only and regularly used T700 device, restored my Official back again.