Database Users

[Q] Does anyone have jtag Pintouts for the Galaxy note 3??

i have a customer he was trying to mess around with his galaxy note 3 N900T and he probably bricked it, when i connect it to the usb it shows as "Qualcomm HS-USB QDLoader 9008" so i figured it might need JTAG but the problem is that i dont have its pinouts.
i would appreciate if someone can share it with us here, or if there is an alternative method for fixing it.
now when i turn it on, the only thing that lights up is the menu button
Thanks

hasanr92 said:
i have a customer he was trying to mess around with his galaxy note 3 N900T and he probably bricked it, when i connect it to the usb it shows as "Qualcomm HS-USB QDLoader 9008" so i figured it might need JTAG but the problem is that i dont have its pinouts.
i would appreciate if someone can share it with us here, or if there is an alternative method for fixing it.
now when i turn it on, the only thing that lights up is the menu button
Thanks
Click to expand...
Click to collapse
Hi! did you get any luck with this one? I have the same problem and i was like 72 straight in the computer searching and testing but nothing

[Guide] No Boot - No Recovery - No Download Mode Unbrick Guide

No Boot - No Recovery - No Download Mode Unbrick Guide​
Qualcomm HS-USB QDLoader 9008 or Secure booting error (No Boot - No Recovery - No Download Mode) or "QHSUSB_BULK"​
Hi team, if you have come here I'm sorry you are having this problem! But my friend and I have been to hell and back trying to fix this problem and we wanted to share our method of success for any poor soul who is experiencing the same thing! For our situation the USB was unplugged half way through flashing a KDZ or going back to stock firmware and created the No Boot - No Recovery - No Download Mode problem.
This has only been tested on the D855.. Just so you know.​
First off, here are some links which you may need to have a look at if you have not done so already. Most of the bricking problems have already been extensively talked about by people here on XDA. For the method that works, we had to pull information from everywhere and spent a long time looking for the solution.
How to go back to stock - http://forum.xda-developers.com/showthread.php?t=2785089
Link for TOTs and KDZ's from the above thread - http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/
The Main Fix for the problem - http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853
The G2 version of the fix (for reference if you still have problems 55+ pages) http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830
This is your last stop shop if everything is broken and nothing works, involves hardware fix - http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
The problem we encountered several times with all of the described methods above, is that many do not describe important things. While the main fix thread for the Qualcomm HS-USB QDLoader 9008 mode, which is shown in device manager, is very well written and detailed, the programs which are linked in this thread are questionable and haven't worked for many users with some offering to fix for money. We searched the internet and located a working version of the program which worked without giving a "Device was not found in dload trying to flash programmer" like the one provided on the XDA page. Use the links below for a working version from this thread http://androidforums.com/threads/lg-g2-not-turning-on-help.916865/
My first point is if you are having problems with any of the things, CHANGE YOUR USB CABLE or use the stock cable (I know most experienced users know this). The reason for this problem has something to do with different USB cables being made for different purposes and are of different qualities. Having an error on the USB ports gave us only qhsusb_bulk on windows device manager, without Qualcomm HS-USB QDLoader 9008 as well.
If you are still having problems, check your USB ports. It is really important to make sure this isn't the problem or you will be trying to fix this problem endlessly.
First attach the USB cable to the computer. When you plug your phone in, make sure you attempt to enter download mode by holding the volume up button when you plug the USB into your phone. Even though the phone will not enter "Download Mode" It will allow the phone to be detected by your computer (at which point you can release the buttons, it should then show "Qualcomm HS-USB QDLoader 9008" under ports. If this is not displayed you have a problem with the USB cable or port, or your phone is hard bricked and you need to head to the above guide for the hardware fix. If you have followed so far and are wondering what to do from here, once the "Main Fix" guide ends, head over to the "How to go back to Stock" thread above. Your phone should be showing "firmware upgrade" and you can proceed to flash a new updated KDZ on your device then everything will work and your nightmare should be over!
Working Boarddiag - https://drive.google.com/file/d/0BzkqP9M0LLWQUkEyRkZrVHlEbDg/view
Qualcomm USB Drivers (Essential for the aforementioned "Main Fix" above) - https://drive.google.com/file/d/0BzkqP9M0LLWQblF6Vl9OcUkwUDA/view
LG United Drivers (Phone Drivers) - https://drive.google.com/file/d/0BzkqP9M0LLWQUURDTHlYOW5YRms/view
If this helped you to fix your nightmare don't forget to hit the thanks button!

The "Wroking Boarddiag" asks for PW. aside from that, very good find, thanks

detected as qdloader hs usb 9008
board diag- ap check failed device not in downld mode

For all people with Windows 10 an problems with drivers (device is detected by Windows but app is not connecting). Decompress de correct cab for your Windows version, and update the driver "Qualcomm HS-USB QDloader 9008" with the path you used to extract. Now this driver isn't advertising that isn't signed anymore, and all apps will connect with your LG G3
Qualcomm HS-USB QDLoader 9008 2.1.0.5 x86
Qualcomm HS-USB QDLoader 9008 2.1.0.5 x64

Hi, I have the same problem, except that when I connect the usb, it shows up as "LGE AndroidNetUSB Serial Port". I'm not sure if I should try the Qualcomm route?

MrMuli said:
Hi, I have the same problem, except that when I connect the usb, it shows up as "LGE AndroidNetUSB Serial Port". I'm not sure if I should try the Qualcomm route?
Click to expand...
Click to collapse
I just fixed my Lg g3 with this method. Not sure if it will work with AndroidNetUSB
Would like to help for any difficulties. (e.g. Not able to find TOT file) etc.
Thanks to @Orcam & @kryptonite

This did not work. Here's what I tried:
1. Without battery
2. Changed drivers as @shawe_ewahs says
3. With battery
4. Admin and non-admin
5. Changing COM ports
But, every time, I get:
"Device was not found in dload trying flash programmer
TEST Aborted!!"
My LG G3 D851 is in Qualcomm HS_USB QDLoader 9008 (COM 41) so I know it is in the correct mode! Agh, it is very frustrating. Any help is appreciated. Thanks.

Thanks you SOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO much! <3 I finally was able to fix my device *O*

furiify said:
Thanks you SOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO much! <3 I finally was able to fix my device *O*
Click to expand...
Click to collapse
No problem. Hope it didn't take you as long as it took us to find all the right stuff

I'm having this problem, but when I plug in without a battery all that shows up in device manager is "Unknown USB Device (Device Descriptor Request Failed)". I tried to do the hardware fix and was able to force the device to reboot by touching the pins. But all that happens is it disconnects and reconnects from USB without being detected properly.
I should note that when I turn the phone on right now, it stays stuck in the initial LG G3 splash screen. When I plug in without a battery, it shows an empty battery icon with a wire and a triangle question mark.
Any idea what I'm doing wrong? I think if I can just figure out how to get my machine to detect my phone as the qdloader hs usb 9008 I can figure out the rest.

The boarddiag v3.99 version 1 and 2 dont work, they dont even get ejecuted, not eve trying to execute as administrator.

Just wanted to reply since I resolved my issue. It turned out that, despite the apparent inability to boot into download mode, I discovered that if I booted up the phone with a battery in it and plugged into a windows 7 laptop, and held the button down to enter download mode, it eventually let me into download mode. I really can't explain why this worked, but just wanted to put it out there. It was at least a few minutes before I noticed that the laptop chirped and it was showing the install screen in download mode.
Hope this helps someone out.

Dr1t3r said:
The boarddiag v3.99 version 1 and 2 dont work, they dont even get ejecuted, not eve trying to execute as administrator.
Click to expand...
Click to collapse
phaim said:
Just wanted to reply since I resolved my issue. It turned out that, despite the apparent inability to boot into download mode, I discovered that if I booted up the phone with a battery in it and plugged into a windows 7 laptop, and held the button down to enter download mode, it eventually let me into download mode. I really can't explain why this worked, but just wanted to put it out there. It was at least a few minutes before I noticed that the laptop chirped and it was showing the install screen in download mode.
Hope this helps someone out.
Click to expand...
Click to collapse
Sounds like it may be a problem with windows from what you two have said. Perhaps compatibility mode is the way to go. They did release a pretty major windows 10 update since I posted this guide.

Meizu m2 note - Problem with unlocking bootloader / usb problem

Hi, i am Damian, btw. im total begginer in case smartphone manage and i dont know english very well, so please, be forgiving.
Today i tried to unlock bootloader on my Meizu m2 Note M571H. I was using this tutorial:
I found a problem with the first step: turn off the smartphone and connect to your pc.
When i turned of my device, and connected by usb with pc, then my phone started charging, i heard the windows's sound of connecting device and just after sound of disconnecting. The Flash Tool didnt found my meizu m2 note and nothing happend. I tried to download newer version of flash tool, download the scatter from other website, update a meizu drivers (they were the lastest), restart phone and pc, use other usb port, turn on debbuging mode, root my device etc. I still didnt resolve my problem. Have you any idea what can i do?
And 1 more time - please, be forgiving because of my english.
I would be very thankfull if will you help me.
@edit
I was installing drivers for wrong com Im an idiot.

Hey I'm facing the same problem.. Can you please help me ?

I am facing the same issue, could be the rom version, I am in 6.xx
or Windows 10.
No COM is appearing for me...
No idea how to solve it though, sorry

First of all you have to download mtk vcom drivers,so when you connect your phone,it will appear in sp Flash tool.Then you have to download unlock tools from web.There you have all that is needed for unlocking the bootloader

lenovo a6000 plus totally dead.

Perhaps,my Lenovo a6000 plus hard bricked because I have flashed wrong file.not connected with pc ,not charging,not boot into recovery,not showing in pc ,not any movement in my phone
If it is hard bricked then how to solve it.please help me who face this situation.

try this
charge your battery from another source as battery is required as compulsion
you don't need much even 2% of charging is enough for dead flashing
after that install proper drivers on your windows machine for qualcomm devices
and then remove and attach battery to your phone ("if you're sure its charged enough")
it'll get detected as qualcomm mass storage device if it got connected
flash it with QFIL
hope so this will help

Bro,for qfil ,I have prefer many sites and download tools and drivers but on my laptop tolls are unable to install.laptop has windows 7 32 bit.when bricked 30 per. Beetery available,the problem is that phone is not responding with pc.so give me link for drivers and tools .I see also some videos and follow links for download but all links are not working.if possible then please help me

I installed qfil and Qualcomm drivers but device not connected and port is nil
Not connected port ,how to solve bro
Anyone guide me please.

https://forum.xda-developers.com/lenovo-a6000/how-to/guide-hard-brick-lenovo-a6000-t3581892

Email me at [email protected] i will give u full guide

lathiyamayur789 said:
Perhaps,my Lenovo a6000 plus hard bricked because I have flashed wrong file.not connected with pc ,not charging,not boot into recovery,not showing in pc ,not any movement in my phone
If it is hard bricked then how to solve it.please help me who face this situation.
Click to expand...
Click to collapse
Your phone is vibrating continously?

No bro,not anyovement

anhh Happened with me use short point method its magical @bugerxXx will help you getting you device alive

I don't understand on page you suggest ,how it is use

I give to Lenovo centre but approx exp .5000

One method is open mobile and 2 points of processor ,touch with copper wire
It works in Lenovo?

Please help me

Not any post regarding hard bricked in bugarxxx

sorry for late reply
didn't got any mail from xda
n me too having 32 bit Windows 7 laptop and fixed my lenovo A6000 plus with the same
downloaded simple adb drivers from here​
removed phone battery connected it again
connected the phone to laptop
and A6000 plus is shown as Qualcomm mass storage device
opened Qfil flashed ROM
and android is back to normal
hope so it'll help

I use this trick ,the main problem in all tricks mobile is not connected with pc .I installed properly Lenovo a6000 drivers ,Qualcomm drivers ,remove beetery ,connect ,volume press with connect all tricks but still mobile Qualcomm is not detected

My mobile is hard bricked ,in hard bricked no response of mobile .All are saying qfil method but for it Qualcomm device detect is necessary .but in my case not detected
Somebody help me please if possible.

If mobile software bricked then it show Qualcomm device detected but hard bricked not any detection

Not unbrick till

REDMI NOTE 4 GLOBAL Not recognized on windows

Hi all,
I've searching everywhere in the web and try all know solution, but i still have my redmi note 4 Global not recognized in windows... ive got it since about 1 week.( see attachement)
My wife have an redmi note 3 pro Se detected on all computers...
Since i have update it by OTA i have now slow charging with the official cable and charger. it charge only with max 500mA.
MTP is not working, i put it in developper mode and usb debug but it's good too.
i can flash it by sd CARD to put in GLOBAL DEV but still the same issue...
For me it's not possible to unlock my bootloader with this issue...:crying::crying::crying:
Any idea?
thanks

Nobody for help me ?

pulesky said:
Nobody for help me ?
Click to expand...
Click to collapse
It is possibly a USB driver issue. You can try updating your drivers. You can also try this: https://forum.xda-developers.com/showthread.php?t=2588979