Asus Zenfone Selfie (ASUS_Z00UD) bootloop issue...... tried wipe cache. factory reset - Asus Zenfone Selfie Questions & Answers

Pls help,
My mobile got stuck in bootloop and i tried wiping cache and factory reset... service centre guys suggested me change board which gonna cost 8k, i tried some rooting (newbie.. but rooted a micromax two years back) but no luck... pls guide me here
ps: my mobile is not rooted upgraded to marshmallow (stock)
pls help

perform fastboot flash
i have same problem with bootloop. recently i upgraded my zenfone selfie to marshmallow and now it is stuck in booting . i have searched for this issue and got the rooted firmware on yandex disk, u can try this for fastboot flashing. this is only way for getting back ur selfie to previous working state.
https://yadi.sk/d/FjbAV-e-3NwghS"]https://yadi.sk/d/FjbAV-e-3NwghS
here u can download the firmware.

Related

Soft brick D802, need help asap.

Hi guys i had problems flashing the new bumped TWRP so i get bootloop, i already flash the stock firmware with Lg Flash tool on Normal Mode, but there are tons of FC's and is impossibile to use the phone, i think is because Normal Mode doesn't wipe data or system and that's my problem i don't wanna do hard reset and loose all my pictures and videos. I can't root or install a custom recovery :/
What can i do?

Note 4 bootloop please help me!!!

well i was trying to use xposed but i needed to flash the latest framework which i downloaded and tried to flash in recovery but when i did my note wouldnt start, its stuck on bootloop when it gets to the t-mobile screen it restarts again, i tried to flash a rom stock in odin but it says FAIL. I also wiped the cache and made a factory reset at recovery but its still not working on my note 4 n910t help me please!!!!

zuk z1 bootloop when flashing any rom

i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Boot and recovery partitions
Sounds like you messed up boot and recovery sections. Since you can boot up successfully, you may try to flash back to ZUI which changes these two sections completely. If it's not a solution for you, I think the only way to repair is completely format including kernel, system and partitions. You can find the tutorial on Website.
...
you can fix it just use TOOL_ZUK_Z1_ENG_0.0.6
Try flashing COS 12.1 via fastboot.
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
Hi!! I've flashed the NucleaRom too and for a couple of weeks it worked just fine. However one day, out of nowhere, the phone, while still on and working, restarted itself and entered a bootloop. After a few days it restarted normally and lasted a couple of hours but then it all started again. The BIG issue here is that when the phone enters in this bootloop where it remains on for about 15 seconds, it does it either in the system or the recovery/fastboot. I've managed to install two other ROMs via TWRP, when it miraculously remained turned on, but the problem persisted.
Is there a chance your problem was similar? How did you manage to flash via QFIL? I can't enter into that "emergency" or "download mode" in order to flash.
Many thanks in advance
i think that the problem is in the bootloader itself you should try flashing the latest os u have used and instal ordinary unofical lineage nightly (you can find everywhere) by this way your bootloader will be updated to 7.1 after that you can install any software i was having same problem when trying to migrate to lineage os
unable to install Custom ROM's
hi ,,
even i had the same problem like recovery was not accepting any ROMS... if we flash it ll go to recovery again and again,
and later i have flashed CM 13 with image file,, it worked and gone to recovery and updated the update to lineage OS 14.1 with Gapps..
hope it might help u...
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
i am continuously on the boot loop! how to get rid of it?
plz help its been 4 hrs, i think i am in trouble! any possible solutions!!!!
U can try one thing.... Install cm13 with flash file and then restart - - & go to recovery select install update and select lineage 14 and G apps... I did like this . And it worked....

bootloop help pls urgent

actually my phone has already rooted with magisk, currently using rr custom rom.
im trying to recover my deleted videos using gt recovery apps but unable to do and ask me to do kingroot to which i proceed it.
after 90% of rooting it stuck and i do a restart to my phone but end up stuck in boot loop.
i try to do clear cache, dalvik and 1 more i forget the name in cwm recovery mode but its useles still stuck in bootloop.
pls i need help and advise...
Post lacks information what model for a starter .
First restore your backed up Nandroid .
Fails
Download mode flash your stock rom through Odin .

Boot loop on stock ROM phone

My Lenovo A6000 Plus is getting stuck on boot loop and showing other weird behaviors. I factory reset it and cleaned its cache from the recovery screen but that didn't solve the problem. Is there possibility that this is a software problem which would be solved if i flash stock ROM / kernel? If yes then how to do that? The instructions i found online for flashing ROMs on my phone, i found them incomplete for me.

Resources