B352 Boot_Insecure_B352_Fix-adb_dm-verity-v2.img
Download:
Download
Many thanks for created goes to Franzroy from Mate 8 Forum
Flash via Fastboot,boot into Twrp and flash Supersu 2.82
New Update to B350 Stock rooted
Downloads:
Download B350 Stock Rom
Download Twrp 3.1.0-3 from P9 Plus Eva
Download Boot_Insecure_B350_Fix-adb_dm-veritySpezial Thanks to franzroy from the Mate 8 Forumfor the Boot img
1,Wipe everything in Twrp,Format Data with "yes",in advanced wipe Dalvic,Cache,System,Data,Cust and internal Storage
2,install B350 Stock Rom in Twrp and Reboot
I add in the Rom Google Playstore,Calender and Contact Sync,Gmail and Youtube,Chrome and replace the PicoTTS with GoogleTTS (PicoTTS it does not work)
You can uninstall all extra Google Apps which I have added.
Rooted with Stock Boot img
I downloaded the update with Firmwarefinder,more times but it of 3 files only one functioned.
I have then put days-long and have managed to make from 2 scripts one and it is working.
You have a Full Rom with included Userdata.
New Root Procedure B332 works 100% and very easy
Downloads:
Download B332 Full
Boot_Insecure_B332_Fix-adb_dm-verity.img Spezial Thanks to franzroy from the Mate 8 Forum Without him it would not be possible!
3.1.0-0 Twrp
Superuser for Emui 5
Download all 4 Files (Full Rom B332,Boot_Insecure_B332_Fix-adb_dm-verity.img,Twrp and Supersu.)
Extract Full Rom B332 with Winzip or 7zip,Winrar....
Copy Full B332 Rom (Update.zip,update_data_full_all_cn.zip),Supersu on your SD Card.
1 Install Twrp via Fastboot or in Twrp via Image flash.
2 Install update_data_full_all_cn.zip (Don´t Reboot after install this)
3 Install update.zip and Reboot into System and make via Settings a Low Level Factory Reset (Factory Reset with internal Memory to mount Data in Twrp)
4 Install Twrp again via Fastboot
5 Flash in Twrp via image flash the Boot_Insecure_B332_Fix-adb_dm-verity.img (Or flash via ADB,both Variants works)( fastboot flash boot Boot_Insecure_B332_Fix-adb_dm-verity.img )
6 Flash Superuser for Emui 5
7 Reboot -Finish
Are you already on B332 with Twrp installed,flash via Fastboot or Twrp image flash the Boot_Insecure_B332_Fix-adb_dm-verity.img and then Superuser for Emui 5
I'm not sure if it works.
Supersu is not installed download from here and install
Download Supersu.apk
Here is Google Contact and Calender sync and the lastest Playstore.
Unpack the file and install as apk.
Download Google Pack
OLD Root Prozedure B320 Does not work 100%
Same Procedure,Flash in Twrp,i flash from B029 and works
The first Beta of Nougat for the Honor note 8.
The official version will be released next month in April
I have made some screenshots under Attachment
Emui 5.0 now has an appdrawer!(See the Pic´s in Attachment)
Attention
At the moment there is no way to go back to Emui 4.1
Requirements:
Unlocked Bootloader Here Thanks to jdantow for Manual
Installed B029 Stockrom
Installed old Twrp for Emui 4.1 Download
You Need:
Copy all the Things in your Extenal Memory/SD Card you need in Rooting Part
Decrypted Data Boot.img B320 Download Special Thanks to franzyroy for Creating the Decrypted Boot img
Twrp for Emui 5.0 Download
Here is a another Thread for Twrp,but this works not for me,i can´t Data not mount
Superuser for Emui 5.0 DownloadThanks to Chainfire for Supersu
Update.zip and update-data_full_all_cn.zip Here Thanks WhySoSeriousJoKer for Uploading
First:Install Full B320 Stockrom without Root
Are you on Android 6.0 Emui 4.1 B029 Stockrom
1.Boot into Twrp and Wipe Factory reset
2.Wipe --> Format data --> to write: yes - confirm
3.Install update_data_full_all_cn.zip - Don't reboot
3.Install update.zip
6.Reboot Wait 5 minutes (Possibly a factory reset If the device does not boot)
You are on B320 Android 7.0 with Emui 5.0 (Stock Recovery after this Procedure is installed)
Second:Root the Device
1.Stock Recovery is installed, Twrp must be installed again the new Version for Emui 5.0
2.Install the B320 Decryped Boot.img in Trwp ( or via Adb/Fastboot
3.After installed the Decryped Boot.img Boot into Twrp and Wipe --> Format data --> to write: yes - confirm,It takes very long.
4.Abort the Data Format,for this press the power button for 10 seconds until it restarts,and boot into eRecovery with Press and hold 3 Sec the Volume up.
5.In eRecovery select Format data partition.
6.After Format Data Shut Down.
7.Press First Volume up and then Power Button and hold both Buttons to Reboot into Twrp.
8.In Twrp Press Mount and see if data is mounted.Is Data Mounted is all ok.
9.Wipe/System,Data,Cache and Dalvik
10.Go back to install SuperSU-v2.79-201612051815-EMUI5.0.zip Don't reboot
11.Go Back to install and install update_data_full_all_cn.zip Don't reboot(You can extract the update_data_full_all_cn.zip and delete some China apps before they are installed)(Unpack-delete Apps/Repack with Winzip or 7 Zip)
12.Go back to install and install update.zip Don't reboot
13.Go back to install and install SuperSU-v2.79-201612051815-EMUI5.0.zip
14.Reboot the Phone it´s reboot´s Two times and it´s normal and after reboot go to Superuser App and open it,comes no error message fits everything.
After the Rooting Procedure is automatically the Stock Recovery installed!
You can reboot in Bootloader and install Twrp again and Data is Mounted.
This is almost the same procedure as the Mate 8 and I have also made it at the Mate 8 and it worked immediately
So much thanks to franzyroy
Sorry for my bad English and i hope you understand!
Mods:
Change the Icon Size:
Use Rootexplorer or Es File Manager and go to:
cust/all/cn/prop
Open the Local.prop with an Texteditor
Search the Line:
######2.BASEAPP TEAM BEGIN
under this Line write:
ro.config.app_big_icon_size=136 (or what you want the size of the icons,136 is very small,look the Pic in Attachment)
This must look like this now
######2.BASEAPP TEAM BEGIN
ro.config.app_big_icon_size=136
Save und look the right Permission torw-r--r--
and reboot
Remove in Music and Videoplayer the China Services:
same here,go in
cust/all/cn/prop
Open the Local.prop with an Texteditor
Search the Line:
######2.BASEAPP TEAM BEGIN
under this Line write:
cofig.onlinevideo.enabled=false
ro.cofig.onlinemusic.enabled=false
Save und look the right Permission torw-r--r--
and reboot
Now you have Video and Music Player without the China Online Service.
Look the Pic´s in Attachment
Or Download my local.prop with this 3 Mods ,unpack with win zip and copy the "local.prop" in cust/all/cn/prop with an File Explorer with root Support,overwrite your local.prop,Save und look the right Permission torw-r--r--
and reboot
Backup your local.prop on Micro SD Card before!
new thread old guy asking...
good idea you started new thread...
part 2
about 2.- if installing boot.img from twrp, which partition to use? bootloader? if installing from twrp I stay in twrp or must restart after install boot.ing... And 1 security question- will room boot after this?
3. and 4. you said format data takes too much time. You never suggest to wait it , but break and go in point 4.?
ivanox1972 said:
new thread old guy asking...
good idea you started new thread...
part 2
about 2.- if installing boot.img from twrp, which partition to use? bootloader? if installing from twrp I stay in twrp or must restart after install boot.ing... And 1 security question- will room boot after this?
3. and 4. you said format data takes too much time. You never suggest to wait it , but break and go in point 4.?
Click to expand...
Click to collapse
In Twrp flash Image there are only 2 options to choose from
Boot or Recovery
For Boot.img use:Boot
For Recovery Twrp or Stock Recovery use:Recovery
Yes wipe Data and after 10 sec wiping Press so long the Power Button to Reboot the Device,If you see the black background with oranges text,3 options are available.
You take Press for 3 sec Volume up to reboot in eRecovery.
In eRecovery is then Format Data Partition.Formate Data Partition and Shut Down the Phone
Reboot into Twrp go to Wipe,Wipe Data--Yes,now it works in Twrp
Go Back to Advanced Wipe and wipe Dalvik,Cache,Data and System.
Do not Reboot!
Flash supersu
Flash Update_data_all_cn.zip
Flash Update.zip
Flash Supersu again
Reboot-wait for 5 Min
Stuck on Huaweilogo Factory Reset and the Phone Booting.
Last sentence/ if final boot fail and stuck on logo, how to wipe?
I now check erecovery before start, 3 options there:
Install firmware and recovery
Shutdown
Reboot
How to wipe data from there for step 3 and 4?
Sent from my SM-T815 using XDA-Developers Legacy app
ivanox1972 said:
Last sentence/ if final boot fail and stuck on logo, how to wipe?
Sent from my SM-T815 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Step 14?
Press Power Button 10sec for reboot
During the reboot press volume up and Power Button and hold both Buttons,see you the black Background with organges text release the buttons
It´s boot to Stock recovery,Factory reset and wipe cache and reboot
the Phone boot into System
Ok, look please other part of question:
How to format data from erecovery, no this option
Sent from my SM-T815 using XDA-Developers Legacy app
I don't know if I understand correctly (I'm new to this stuff) but I got back to Emui 4.1.
I installed the Rom without root successfully but messed up the instructions to root and got stuck in some sort of bootloop.
Then Emui reinstalled a factory fresh B027 over wifi and upgraded to B029.
I think this happened with charge/data cable plugged into the PC and pressing the volume up button on reboot.
Apologies if that is not what you meant but it seems to be difficult to brick the phone
ivanox1972 said:
Ok, look please other part of question:
How to format data from erecovery, no this option
Sent from my SM-T815 using XDA-Developers Legacy app
Click to expand...
Click to collapse
I say abort the Data Wipe in Twrp and boot into e Recovery,there is a Option to wipe Data Partition,this Option is only if abort data wipe in Twrp
tiggrr1 said:
I don't know if I understand correctly (I'm new to this stuff) but I got back to Emui 4.1.
I installed the Rom without root successfully but messed up the instructions to root and got stuck in some sort of bootloop.
Then Emui reinstalled a factory fresh B027 over wifi and upgraded to B029.
I think this happened with charge/data cable plugged into the PC and pressing the volume up button on reboot.
Apologies if that is not what you meant but it seems to be difficult to brick the phone
Click to expand...
Click to collapse
Always got back with flash update_data_all_cn and Update zip.
My HN8 works fine and i root successfully
Great, I don't know this, never break wipe before. Puzzle is almost settled. I will probably try afternoon.
Have you solved viber WhatsApp notification?
And most problem: brightness drop in browser?
Thanks x 10000000.
Sent from my EDI-AL10 using XDA-Developers Legacy app
@letschky
Have you solved viber WhatsApp notification?
And most problem: brightness drop in Browser and dialer?
I copy Whatsapp in System/App,give Permissions and no Problems.
Which Brightness Problem? I have not Problems with it.
Ok, for viber and WhatsApp same solution as on 4.1?
Try any browser in middle light conditions / system reduce brightness in browser and dialer more then any other app and more then is ok for use...
https://forum.xda-developers.com/showthread.php?t=3559949
On all huawei nougat same problem
I'm having problems copying Apps on System/App folder. When I try copying the APK file, it says there is not enough space. I even tried in TWRP and it is says it can't copy it. I even tried mounting the system folder. Any ideas?
Sent from my EDI-AL10 using Tapatalk
using, it is super fast but I have some problems:
-nova launcher unread notifications counter can not be switch on. It is switched on, but go off immediately
UPD.: solved by give nova and tesla unread every possible rights in phoneManager and apps..
-it seems to me that non huawei app (google, chrome, any...) have some delay on opening, like OS check them somehow?
- browser in middle light conditions / system reduce brightness in browser and dialer more then any other app and more then is ok for use...
https://forum.xda-developers.com/sho....php?t=3559949
If somebody not see this: on middle bright conditions open chrome, brightness drop. Tap navigation key recent apps, chrome is in foreground it is clear seen that brightnes rise. tap again chrome, brightness drop whet it on stays active... ugly. it was same in emui 4.1 but as solving by batery mode performance option use instead balanced
probably they have not made battery profiles for beta version and nothing can be done...
UPD.: solved by force stop, dissable boot, freeze Power Genius (com.Huawei.powergenie) in sd maid.
maybe imonitor (com.huawei.imonitor) is also battery app, if somebody knows??
What bugs that you faced after booting the Rom ? Is this version stable for daily use
And Thank you so much for posting this thread
@letschky WHAT is best procedure to roll back to b027?
I just got this phone about 8 days ago, and I have a few questions if anyone can answer, I already had the EMUI 5.0 installed on my phone (a reset of the phone triggered a download after signing up with the Huawei ID).
1) I noticed that after I installed the decrypted boot image some of the features disappeared, like the themes, and the changing of the pictures on the lock screen, and the icons seems to be all over the place.
2) I noticed some of the settings are missing, like before rooting and unlocking there was an option to save power by making the screen dark, now it seems that option is gone.
3) If after rooting could you re-lock the bootloader and still keep root?
Also lastly, does anyone here have the english version of HiVoice (HwVAssistant.apk) thats not deodexed? I wanted to try this out but the only version I see is the deodexed and I havent tried yet but I think it still wont work on a rooted phone since the rom isnt deodexed. The reason I am asking is my car is picking it up as Siri (I know its not) but if it works like siri it would be golden.
Welp I cant get my phone back, I was trying to get back to stock, and nothing is working stuck at the honor logo, even tried to go back to emui 5.0 following the directions here, but data keeps not staying mounted. And recovery over WLan wont work because it says failed to get package info. Anybody have any ideas?
Related
Hi,
So I have created this thread just because I can see many people creating new threads as after flashing CM 14.1, their phone doesn't boot up. So for all those who are going to flash CM 14.1 or have already flashed it and can't get it working, this thread is for you.
What you will need:
1. Rooted OnePlus X (Obviously)
2. Custom Recovery (TWRP recommended)
3. Latest CM 14.1 build
4. Arsenic Kernel or BlackReactor Kernel
So this is how you get CM 14.1 working on your OPX (make sure your battery is above 80% just to be sure that nothing will go wrong considering battery's point of view)
Make sure you have backed up everything before performing the following steps as the process will wipe your data completely. (I would recommend to take a Titanium backup of all user apps and then taking a nandroid backup of system and data)
1. Download the required files and place them in your SD Card or internal storage
2. Reboot your device into recovery
3. Go to wipe, and swipe to factory reset (Note! This will completely wipe all the data from your device including app data and SMS! This won't wipe the contacts but just to be safe, have a backup of all your contacts)
4. Go to Wipe again, and go to Advanced wipe, select the following partitions - System, Cache, Dalvik cache. Swipe to wipe (Note! Make sure you have a backup of the System as this will wipe the Operating System from your phone!) Although this step isn't necessary, I like to do it.
5. Go to install, and direct to the location where you have saved the CM 14.1 zip file and the kernel. Select the files, and swipe to flash.
6. If you want anything else in your system, direct to that location, select the zip file, and swipe to flash. (Note! You need not flash the SuperSU zip file as CM offers Root access in developer options)
7. Reboot your system and wait for it to boot.
Viola! Your device is now running official CM 14.1 nightly.
Hope this helps! ?
Downloads:
1. Latest CyanogenMod nightly - found here https://download.cyanogenmod.org/?device=onyx
You can have any version of the nightly as long as it is CM 14.1
2. Arsenic Kernel R32 (or R31) - http://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Open the above thread and follow the guide
OR
Black Reactor kernel v1.0 - http://forum.xda-developers.com/oneplus-x/development/kernel-blackreactor-kernel-oneplus-x-t3460989
-Reserved-
Good Evening, @aamodjoshi23 THX a Lot. You are my Hero. Finally it works.
greetings
If you're facing some Error 7 while trying to flash cm 14.1, you can try updating the bootloader following this
http://forum.xda-developers.com/showpost.php?p=69267239&postcount=2560
I used the Oxygen OS 3.13 full ROM as recommended, edited updater-script (following those instructions)
Immediately after flashing the OOS 3.13 rom, you don't have to reboot.
I immediately flashed twrp 3.0.3 original from https://dl.twrp.me/onyx/
I then rebooted into twrp 3.0.3 (using the reboot button in twrp, then bootloader)
Then I installed (in this order):
cm 14.1 (https://download.cyanogenmod.org/?device=onyx)
arsenic kernel (as recommended above)
opengapps
Not sure if this step is necessary, but I wanted to let twrp patch the rom to not overwrite twrp so I rebooted into twrp again (using reboot --> bootloader in twrp)
Then I used reboot --> system
First boot took a while, but now I have nougat!!
kenel zip every time
Do i need to flash the kenel zip every time I update the the cm 14.1 zip file?
allons-y said:
Do i need to flash the kenel zip every time I update the the cm 14.1 zip file?
Click to expand...
Click to collapse
Yes, as when you flash the CM 14.1 build, the kernel that is provided with the build is also flashed, and that is not supported. So you need to flash it every time you flash a CM 14.1 build, but if you want to flash any other build, something like CM 13.0, then you need not as the kernels provided in those are supported.
aamodjoshi23 said:
Yes, as when you flash the CM 14.1 build, the kernel that is provided with the build is also flashed, and that is not supported. So you need to flash it every time you flash a CM 14.1 build, but if you want to flash any other build, something like CM 13.0, then you need not as the kernels provided in those are supported.
Click to expand...
Click to collapse
Hi,
I have a very specific problem. I rooted my Oneplus x few months back and everything was fine. I use to get update notifications and after downloading it use to update automatically. But since last 2 months i download the update files but it takes me to recovery and then i cant find the zip file to flash/install. (i also started using external sd card two months back, but not sure if it has to do anything with this). I tried searching a solution on web - tried checking 'system' under Mount tab, installed an app for auto update and some more but no use. I even connected my phone in recovery mode to laptop and copied the zip file to internal memory but while flashing it gave error.
Now i am not sure what the problem is. Do i need to update my recovery or something else. Pls help.
shashanksachdeva said:
Hi,
I have a very specific problem. I rooted my Oneplus x few months back and everything was fine. I use to get update notifications and after downloading it use to update automatically. But since last 2 months i download the update files but it takes me to recovery and then i cant find the zip file to flash/install. (i also started using external sd card two months back, but not sure if it has to do anything with this). I tried searching a solution on web - tried checking 'system' under Mount tab, installed an app for auto update and some more but no use. I even connected my phone in recovery mode to laptop and copied the zip file to internal memory but while flashing it gave error.
Now i am not sure what the problem is. Do i need to update my recovery or something else. Pls help.
Click to expand...
Click to collapse
First of all we need more info about your current ROM recovery etc.
Fap4k said:
First of all we need more info about your current ROM recovery etc.
Click to expand...
Click to collapse
I installed CM 13.0-20160928-NIGHTLY-onyx and the recovery is: TWRP v2.8.7.0 | blu_spark r8
I'll be grateful for a solution.
shashanksachdeva said:
I installed CM 13.0-20160928-NIGHTLY-onyx and the recovery is: TWRP v2.8.7.0 | blu_spark r8
I'll be grateful for a solution.
Click to expand...
Click to collapse
In October oneplus updated to 6.0.1 officially i.e OOS 3 it brings new bootloader to the device as you are using old recovery you can't flash new update..so you need to upgrade to latest bootloader by following thread available in general section or you can flash stock recovery and upgrade to latest OOS and flash whatever you want to flash..I recommend you to see how to upgrade bootloader in general section if you are planning to flash custom ROMs or if want to flash latest OOS then simply flash stock recovery and upgrade. onece you updated to OOS 3 after that you can flash new official twrp 3.0.3.0 from its official page.
Edit: for old bootloader you need stock 5.1.1 recovery..which is not available in official oneplus download page..so just follow below link
https://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Fap4k said:
In October oneplus updated to 6.0.1 officially i.e OOS 3 it brings new bootloader to the device as you are using old recovery you can't flash new update..so you need to upgrade to latest bootloader by following thread available in general section or you can flash stock recovery and upgrade to latest OOS and flash whatever you want to flash..I recommend you to see how to upgrade bootloader in general section if you are planning to flash custom ROMs or if want to flash latest OOS then simply flash stock recovery and upgrade. onece you updated to OOS 3 after that you can flash new official twrp 3.0.3.0 from its official page.
Edit: for old bootloader you need stock 5.1.1 recovery..which is not available in official oneplus download page..so just follow below link
https://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Click to expand...
Click to collapse
I made a blunder. I read somewhere to upgrade TWRP to 3.0.3 and after doing that now i just can't access the recovery mode. When i try to boot in recovery mode the screen gets stuck with One+ logo. Then I even tried to Factory reset and the phone rebooted to the same screen stuck with logo. I longed pressed the power button and it got switched off and then again turned it on. It started and is working fine but I cant factory set it, nor cant I access recovery to flash anything.
shashanksachdeva said:
I made a blunder. I read somewhere to upgrade TWRP to 3.0.3 and after doing that now i just can't access the recovery mode. When i try to boot in recovery mode the screen gets stuck with One+ logo. Then I even tried to Factory reset and the phone rebooted to the same screen stuck with logo. I longed pressed the power button and it got switched off and then again turned it on. It started and is working fine but I cant factory set it, nor cant I access recovery to flash anything.
Click to expand...
Click to collapse
This is because you flashed wrong recovery twrp 3.0.3 is for new bootloader and you are on old bootloader..that's why it all happened..so you just need to flash old recovery..then follow given link to upgrade bootloader and recovery.
shashanksachdeva said:
I made a blunder. I read somewhere to upgrade TWRP to 3.0.3 and after doing that now i just can't access the recovery mode. When i try to boot in recovery mode the screen gets stuck with One+ logo. Then I even tried to Factory reset and the phone rebooted to the same screen stuck with logo. I longed pressed the power button and it got switched off and then again turned it on. It started and is working fine but I cant factory set it, nor cant I access recovery to flash anything.
Click to expand...
Click to collapse
I've got a good news and bad news for you.
The bad news is, no one has the older 2.8.x TWRP image files and there are no threads that have the download links for the older version of TWRP. So you're stuck and you have lost your recovery. You have lost everything... Having no recovery means you can't do a lot of things like factory reset, any wipe of a partition, you won't be able to update your system, you won't be able to flash zip files to enhance your experience and many more... I'm sorry my friend...
The good news is, I've got you covered. I had saved the older TWRP so that if anyone one day would need that recovery image, I would be able to help them.
Download the older TWRP from here : https://drive.google.com/file/d/0B2Ms-zaNd3SiTmpxX0UtYUV2R1k/view?usp=drivesdk
Flash it. You should get back your recovery.
e: unknown command (log)
e: unknown command (log)
am not able to make my device android 7.0 running...
i tryed and install kernal after that but no luck, stuck on boot only 1 plus logo will appear, please recommend any solution.
Plush suthar said:
e: unknown command (log)
e: unknown command (log)
am not able to make my device android 7.0 running...
i tryed and install kernal after that but no luck, stuck on boot only 1 plus logo will appear, please recommend any solution.
Click to expand...
Click to collapse
Which ROM you are on currently?
If possible post screenshot of about device in setting.
Fap4k said:
Which ROM you are on currently?
If possible post screenshot of about device in setting.
Click to expand...
Click to collapse
using resurrection remix marshmallow 6.0...
Plush suthar said:
using resurrection remix marshmallow 6.0...
Click to expand...
Click to collapse
Did you ever updated bootloader?
If not than update your bootloader and install latest recovery!!
Plush suthar said:
e: unknown command (log)
e: unknown command (log)
am not able to make my device android 7.0 running...
i tryed and install kernal after that but no luck, stuck on boot only 1 plus logo will appear, please recommend any solution.
Click to expand...
Click to collapse
By stuck on boot, I didn't know you meant that it showed only the OnePlus logo and not even powered by Android.
In that case, follow this guide to update your bootloader :
https://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Hello dear XDA community, if you haven't seen already, PA aka Paranoid Android is back!
More information: https://www.xda-developers.com/para...-2-builds-pie-controls-color-engine-and-more/
You can download it here: http://get.aospa.co/official/sailfish
Hope yall enjoy the PA godess! If you have tried it out, you may tell us how it went for you and how things are going.
Kind regards and happy flashing :highfive:
What would the proper sequence of steps be to flash this? I'm currently running Pixeldusts latest with April BL and TWRP rc1
Edit: nevermind I am an idiot
I may be wrong but I thought we weren't able to flash gapps on the pixel? Also, what build is this based on?
Error!
Just tried flashing. On April bootloader. Got an error message:
"Could not find the 'META/INF/com/google/android/update-binary' in the zip file"
Oh, well.
Oops - error was because I was trying to install from TWRP that was using fastboot! Once I flashed TWRP, installation was perfect!
pavanmaverick said:
Just tried flashing. On April bootloader. Got an error message:
"Could not find the 'META/INF/com/google/android/update-binary' in the zip file"
Oh, well.
Click to expand...
Click to collapse
I got it to boot but the beans GApps I had wouldn't let me back up from the cloud upon setup and a few other things are kinda buggy so I went back to PN
deleted to wrong method
inyourname said:
1. go to fastboot mode and boot twrp rc1
2. flash data, system, cache
3. install rom
4. reboot to system
5. turn off your phone, go to fastboot mode and boot twrp rc1 again
6. flash twrp rc2 -> bootsigner
7. reboot to twrp
8. install beansgapps
9. reboot to system
follow this instruction and it will works perfect!
Click to expand...
Click to collapse
Were you able to restore apps via Google backup?
crossen0 said:
Were you able to restore apps via Google backup?
Click to expand...
Click to collapse
i tried after writing the instruction but nothing works either. even i cannot even boot to the lockscreen properly. my bad
follow this method and it works but not working google backup setup, so you should install apps and backup settings manually
1. go to fastboot mode and boot twrp rc1
2. flash data, system, cache
3. install rom
4. reboot to system and unlock the lockscreen (it means swipe the lockscreen)
5. turn off your phone, go to fastboot mode and boot twrp rc1 again
6. flash twrp rc2 -> bootsigner
7. reboot to twrp
8. install beansgapps
9. reboot to system
i hope it helps
It says 0 downloads on the site linked above. Weird or am I just "paranoid"??
ragzz03 said:
It says 0 downloads on the site linked above. Weird or am I just "paranoid"??
Click to expand...
Click to collapse
On their google+ official forum they said they're having issues with their own serves, there is an official mirror if you check
Working so far....
I'm on the April Bootloader, and this ROM is working like a charm so far. My steps:
1. Install TWRP, boot into Recovery
2. Wipe
3. Install PA ROM
4. Reboot into System, and then boot into Fastboot
5. Reinstall TWRP, boot into Recovery
6. Install Open GApps (Nano package)
7. Reboot into System
8. Boot into TWRP
9. Install SuperSU
10. Reboot into System
11. Used Titanium Backup to reinstall apps and data
With this method, everything seems to work. I guess if you are on May bootloader you will need to reflash the boot signer after each step involving flashing sometime from TWRP?
pavanmaverick said:
I'm on the April Bootloader, and this ROM is working like a charm so far. My steps:
1. Install TWRP, boot into Recovery
2. Wipe
3. Install PA ROM
4. Reboot into System, and then boot into Fastboot
5. Reinstall TWRP, boot into Recovery
6. Install Open GApps (Nano package)
7. Reboot into System
8. Boot into TWRP
9. Install SuperSU
10. Reboot into System
11. Used Titanium Backup to reinstall apps and data
With this method, everything seems to work. I guess if you are on May bootloader you will need to reflash the boot signer after each step involving flashing sometime from TWRP?
Click to expand...
Click to collapse
Does this have all the navbar and status bar mods?
And does setup wizard cloud backup work with the nano GApps? I tried full and it would only allow phone to phone back up.
S8ntsHaz3 said:
And does setup wizard cloud backup work with the nano GApps? I tried full and it would only allow phone to phone back up.
Click to expand...
Click to collapse
Don't know - I use Titanium, and not the cloud backup. Sorry.
---------- Post added at 10:42 AM ---------- Previous post was at 10:41 AM ----------
drocny87 said:
Does this have all the navbar and status bar mods?
Click to expand...
Click to collapse
Not sure which mods you're referring to. It has immersive mode, and Pie controls.
All good thanks
S8ntsHaz3 said:
And does setup wizard cloud backup work with the nano GApps? I tried full and it would only allow phone to phone back up.
Click to expand...
Click to collapse
if you boot the phone after follows that instruction and flash nano gapps,
Hello screen - wifi setting - connect pixel<->other phone(mine was nexus5) - then the screen said you must use other way to restore back up - select cloud backup - email and password - restore backup
In that case you can restore your apps and backup settings from cloud backup cause i tried and works perfect.
i tried everything to restore cloud backup without connecting other phone but cannot found any ideas.
*** Sorry, my English isn't good ***
Hi, I have a problem with OP5, I decided to install OOS 8.0 (Beta), I had OOS on 7.1.1 (Root) (TWRP), I made full wipe in TWRP and installed OOS 4.5.14 (7.1.1), after that i get Stock Recovery and Iupgraded OOS to 8.0 (According to the OnePlus manual) -> Bootloop. I decided to go back to 7.1.1 -> Error, I uploaded TWRP and another attempt to download 7.1.1 -> The system got up but I can not do anything because I have an error "Udecrypting the device. (Write to do "Factory reset"), so again to TWRP -> Full Wipe and here is interesting, I get my error "Wrong argument", the phone does not see my built in memory (I write that I have 0mb), what can I do in this situation? Anyone know?
ERROR in TWRP: "Unable to mount storage"
Please help me.
Go to recovery -wipe-advanced wipe-data-repair or change file system- change file system. First select EXT2 and after that EXT4 and now you should be able to use your storage but you need to flash new TWRP (try this one https://forum.xda-developers.com/devdb/project/dl/?id=27442)
themasv said:
Go to recovery -wipe-advanced wipe-data-repair or change file system- change file system. First select EXT2 and after that EXT4 and now you should be able to use your storage but you need to flash new TWRP (try this one https://forum.xda-developers.com/devdb/project/dl/?id=27442)
Click to expand...
Click to collapse
Thank you for that link. I was having another issue - the TWRP downloaded from the official site didn't work on the latest Oreo beta build and didn't overwrite the stock recovery and couldn't mount /data. This one did.
yeah im having major issues with mine, im now stuck in a download mode i cant get out of !
The first question is, you want to go Oreo or return nougat? In the first case, go to the dedicated thread, download the black TWRP and format data (if you can't read anything) reboot to TWRP again now copy the Oreo firmware and install it from the same recovery, reboot to recovery again if you don't have the stock one automatically installed, just flash it via TWRP. So once you're in stock recovery format EVERYTHING, reboot to system, and after you've configured the initial setup of your device if you want reboot to bootloader and reinstall the black TWRP and flash magisk 14.56 for root.. I've done this for getting this Oreo rom works
Exactly happened with me too. I even accidentally deleted all the contents of my storage. Tried to sideload via adb but got unknown device error. This thread worked for me
https://thedroidguru.com/how-to-unbrick-oneplus-5-phone-with-official-tool/
ive just restored the latest nougat firmware/radios and jumped back onto an aosp build until op5 gets official Oreo build
I've got a SM-G950F, and succesfully flashed TWRP on it.
Wiped /data, after that i flashed dm-verity and force encryption disabler, everything was ok until the first boot into the system.
It booted up, and immediately after that i turned off the phone and booted into TWRP, and for some reason it couldnt mount /data again.
The tutorial i have followed:
Thanks for the tutorial to: jesec
Part 1 - HOW-TO FLASH TWRP:
1. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options and enable OEM Unlock option.
3. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
4. Download and extract Odin (Samsung's Flash Tool) to your computer.
5. Download a .tar image of TWRP.
6. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [BIXBY] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
7. Open Odin and place that TWRP tar file in the [AP] slot.
8. Connect your phone.
9. Hold [VOLUME UP] + [BIXBY] + [POWER] on your phone and then press start on Odin.
10. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [BIXBY] + [POWER] or you may not reboot into TWRP.
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/".
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs via TWRP.
Part 3 - HOW-TO ROOT:
1. Download the flashable zip.
- Option 1: Magisk
- Option 2: SuperSU (untested)
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Part 3a - HOW-TO FLASH CUSTOM ROMS:
1. Download the flashable zip.
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Simple.
Click to expand...
Click to collapse
Before the 1st boot i even rooted the device, that remained after the first boot, but no /data mount.
After the 5th try, i gave up.
What could be the problem, or is this normal on this phone?
Are you using latest twrp version 3.2.3.2
I'm using 3.2.1.0
kristof889 said:
I'm using 3.2.1.0
Click to expand...
Click to collapse
Use latest twrp 3.2.3.2 should have data mount and quota issues fixed.
You can flash the .Img file through twrp or flash the .img.tar file with Odin.
After flashing reboot straight into twrp and repeat part 2 of the guide you quoted.
I would be interested to know also if in download mode if you have a line in there saying rmm state?
Twrp for s8 exynos
https://dl.twrp.me/dreamlte/
Installed the 3.2.3.2 version, but nothing has changed. after the first boot into system, TWRP says cant mount /data..
I dont have anything like rmm state in download mode.
kristof889 said:
Installed the 3.2.3.2 version, but nothing has changed. after the first boot into system, TWRP says cant mount /data..
I dont have anything like rmm state in download mode.
Click to expand...
Click to collapse
I am assuming you followed the instructions that you quoted in your first post.(mainly part 2) after flashing twrp
Did you format data in twrp - not wipe - this is needed to decrypt your phone.
Rebooted back into twrp.
Did you flash the no verity opt zip (version 6) - this will disable re encryption of your phone when booting back into system.
This should all be done before booting back into system otherwise your phone will re encrypt itself.
I am assuming you followed the instructions that you quoted in your first post.(mainly part 2) after flashing twrp
Did you format data in twrp - not wipe - this is needed to decrypt your phone.
Rebooted back into twrp.
Did you flash the no verity opt zip (version 6) - this will disable re encryption of your phone when booting back into system.
This should all be done before booting back into system otherwise your phone will re encrypt itself.
Click to expand...
Click to collapse
I formatted data, not just wiped it.
I have installed the no verity opt, the latest version.
Even after these, my phone reencrypted itself.
kristof889 said:
I formatted data, not just wiped it.
I have installed the no verity opt, the latest version.
Even after these, my phone reencrypted itself.
Click to expand...
Click to collapse
When do the errors occur ie: during backup,restore,flashing something.
When first starting twrp did you swipe to allow modifications or did you leave it as read only.
You mean, the data mount error?
If yes, immediately after the 2nd boot into TWRP, after the first boot into system. Before i do anything in twrp, i check the log (with the button on the lower right) and it creates a bunch of errors, all in contact with the data partition.
So i can even do a proper backup.
If i flash any zip, upon the next boot into system it says something like verify failed, cannot reboot your phone and it gives a button wich used to restore the phone from recovery, but now i cant even do that bcoz it cant mount /data and thus can restore the phone.
kristof889 said:
You mean, the data mount error?
If yes, immediately after the 2nd boot into TWRP, after the first boot into system. Before i do anything in twrp, i check the log (with the button on the lower right) and it creates a bunch of errors, all in contact with the data partition.
So i can even do a proper backup.
If i flash any zip, upon the next boot into system it says something like verify failed, cannot reboot your phone and it gives a button wich used to restore the phone from recovery, but now i cant even do that bcoz it cant mount /data and thus can restore the phone.
Click to expand...
Click to collapse
Still sounds like you device is still encrypted.
Doing a factory reset with twrp should work to restore your phone or at worst you can re-flash your firmware.
If you can in twrp FORMAT data again and flash the no verity zip use version 6 zip file
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
I would be curious to know in twrp in the mount menu what options are ticked as well.
After the fresh flash, it was not encrypted because i could access the internal storage, and data was mounted.
Now in TWRP system(read only), cache and dalvik is mounted, and internal storage says 0MB
kristof889 said:
After the fresh flash, it was not encrypted because i could access the internal storage, and data was mounted.
Now in TWRP system(read only), cache and dalvik is mounted, and internal storage says 0MB
Click to expand...
Click to collapse
What Android version are you on?
When you flashed twrp it should have asked you whether or not to ' swipe to allow modifications ' did you swipe to allow or not.
In the mount menu of twrp I have ticked/checked data,cache,SD card the option at the bottom to allow read only I have ticked - this does not stop me from doing backups but does stop me from restoring (data mount error ) so you can leave it unticked.
I would.like to know your steps for twrp installation (not the one you quoted in first post) as I screwed up when I first tried.
I attached the software information bellow.
I have not swiped to allow for system modifications
First steps were the followimg:
Install .tra with odin
Immediately reboot to twrp
No swipe for system modifications
Format data
Flash no dm verity v6
(Flash magisk)
Reboot to system
kristof889 said:
First steps were the followimg:
Install .tra with odin
Immediately reboot to twrp
No swipe for system modifications
Format data
Flash no dm verity v6
(Flash magisk)
Reboot to system
Click to expand...
Click to collapse
Ok basically you have missed a step as far as I can see
(When I did mine I did swipe to allow modifications )
After you have formated data you will need to reboot back into twrp ( use reboot menu in twrp )
Then flash the no verity zip and magisk
If using magisk I would try the latest version 18 it's working ok for me.
Then boot into system to see if everything ok
Then reboot into twrp and see if the data mount issue is fixed.
spawnlives said:
Ok basically you have missed a step as far as I can see
(When I did mine I did swipe to allow modifications )
After you have formated data you will need to reboot back into twrp ( use reboot menu in twrp )
Then flash the no verity zip and magisk
If using magisk I would try the latest version 18 it's working ok for me.
Then boot into system to see if everything ok
Then reboot into twrp and see if the data mount issue is fixed.
Click to expand...
Click to collapse
Thank you for your advice. I will try it in the following days and will post the result.
I fixed this by flashing Renovate ICE's ROM and selecting the TWRP included in the AROMA installer.
Can access storage on TWRP now with no issues.
CoreyOS said:
I fixed this by flashing Renovate ICE's ROM and selecting the TWRP included in the AROMA installer.
Can access storage on TWRP now with no issues.
Click to expand...
Click to collapse
But i want to use the stock rom.
Maybe if i flash Renovate rom and after that again the stock?
kristof889 said:
But i want to use the stock rom.
Maybe if i flash Renovate rom and after that again the stock?
Click to expand...
Click to collapse
Why stock???
It pretty much is stock, just you have full control over the apps preinstalled and you can change colours of various UI elements.
It's just easier to flash a zip than it is to flash via ODIN, then flash TWRP and keep trying over and over to get this result when I know this rom works fine with CTSprofile.
You will only need to flash TWRP once and copy the rom to your phone.
The rest is magic (AROMA)
I haven't really had to mess with anything and have just installed and used the HSBC banking app as if it were an official phone. (ROOTED and custom ROM and Recovery)
One extra step you could take is to use Magisk hide and point it to the app you want to hide root from.
CoreyOS said:
Why stock???
It pretty much is stock, just you have full control over the apps preinstalled and you can change colours of various UI elements.
It's just easier to flash a zip than it is to flash via ODIN, then flash TWRP and keep trying over and over to get this result when I know this rom works fine with CTSprofile.
You will only need to flash TWRP once and copy the rom to your phone.
The rest is magic (AROMA)
I haven't really had to mess with anything and have just installed and used the HSBC banking app as if it were an official phone. (ROOTED and custom ROM and Recovery)
One extra step you could take is to use Magisk hide and point it to the app you want to hide root from.
Click to expand...
Click to collapse
So on that rom i can use s health and all knox based apps like normal?
If yes, i will try it, it looks very nice
The title says it all, i have been using a custom ROM (Havoc OS) and the LolZ kernel with magisk, it works perfectly but as soon as i restart the system. it bootloops and i have to keep restoring, re installing and so on until it finally works.
Does anyone have an idea of what might be going on?
device: Samsung Galaxy Note 3 SM-N9005 hlte
Even more info incase you need it:
Steps to create problem for me:
Install Havoc OS
Install LolZ kernel
Install Magisk
Boot and use
Restart
(problem comes)
Steps to fix (Before):
Install Havoc OS
Get rid of remainders of magisk for lolz kernel
Install LolZ kernel
Install Magisk
Restore Data partition
Reboot to System
Right now nothing is working, ill try another way and update this
also, i noticed that instead of storage being in
/storage/emulated/0
its now in
/sdcard
according to twrp
Ok this should be the actuall way excluding ALL ways:
1. Reboot to cause the issue lol
2. Go to recovery (twrp recommended)
3. repair the system partition and data partition.
4. Shut down then connect to cable.
5. Let it boot, if it dosent boot to kernel and goes to recovery, try reformatting, 6. restoring, dont touch what you dont want lost etc then start from step 3 (If it goes to charging anim, ignore this step)
6. Let the charge animation play
7. after the screen turns off / you know the charging animation played
8. Boot via power button
9. Works!
Now i really feel a tiny bit better when rebooting my phone XD
If it bootloops after step 8, try reformatting, wiping, repairing, restoring etc-