MM - USB transfer problem - Samsung Galaxy S7 Edge Questions and Answers

Hi, 2 weeks ago I was still able to transfer files through MTP.
Since I've tried again today, my PC detects it as MTP, but it's not showing up as a drive in "This PC"
Also, I've noticed, it doesn't come up with "Allow access to device data" option anymore - so this could be the reason?
I used TWRP and was able to see the SD card data (I have encryption so I can't see the device data)
Anyone else have this problem?
I've tried enabling/disabled USB debugging mode.
I've tried on a few PCs and MACs
Can't figure it out! Annoying!

still can't figure it out - Any idea why "Allow access to device data" doesn't pop up anymore? I have used another s7 edge on my PC and it comes up with the option and works fine. It has to be something with my device

Any apps removed/disabled?

Related

[Fixed] USB mounting problem since installing Kies

My Vibrant doesn't connect as a data storage device around the time I started using Kies. My phone is 100% stock beyond some attempts to fix the GPS (which didn't work and returned to stock). I installed Kies to do USB tethering and changed the setting on the phone to ask in which mode I want to connect.
Last week I was having trouble with connecting in Kies mode and tethering. I then noticed that I could only connect to the PC when I selected the phone option for Kies and not as a media player or storage device. I proceeded to uninstall Kies from my PC to see if that fixed the drivers. No go. I tried another PC which has never had Kies on it and also no go.
Here are the symptoms:
1) Plug USB cable to Phone
2) Menu on phone shows: Select Kies, Media Player or Storage
3) Select Storage
4) USB symbol appears and goes through connecting to connected state
Normally at this point the Win7 PC will pop-up with an auto start window asking if you want to open the storage device or transfer photos. In my case nothing appears. I also check My Computer and the phone is not mounted it doesn't appear later. I suspect a phone issue. Is there a way to fix this without doing a factory reset? Reboot doesn't change anything.
Anyone know a fix for this problem?
Make sure to use these drivers
http://forum.xda-developers.com/showpost.php?p=7238660&postcount=1
Stupid question, but are you pressing "mount" on your phone when your in USB storage mode?
note to self: read OP *before* replying
If it's still set on Ask on Selection try changing it to Mass Storage. I recall reading something that said Ask on Selection doesn't work right. I just toggle it between Mass Storage and Kies manually.
Relikk356 said:
Make sure to use these drivers
http://forum.xda-developers.com/showpost.php?p=7238660&postcount=1
Stupid question, but are you pressing "mount" on your phone when your in USB storage mode?
Click to expand...
Click to collapse
Changed to Developer Mode USB and forced reinstall of the drivers. Thanks for your help guys.

New Droid X can't install USB composite device

Hello folks,
Last Saturday, my Droid X was stolen. I just got the replacement today and being a semi-noob, I just realized that I hadn't copied all of my Titanium Backup from the SD card to the computer so now I'm basically stuck at the beginning.
I'm ready to root my device but I've hit a roadblock. For some reason, I cannot get through the installation for USB Composite Device. I've tried PC Mode, Mass Storage, Windows Media Sync, and Charge Only. Sometimes I can see the icon of the Droid in my computer but I can't get it to show only the removable storage device.
Cannot Install this Hardware - Error occurred during the installation of the device. The System cannot find the file specified.
I don't want to root and backup everything to the SD card if my computer won't read the SD card. I have the motorola drivers installed and this worked fine on the previous phone.
Can anyone help me figure out this problem? Thanks!
Make sure the Motorola drivers are installed correctly on your PC. You might need to locate the latest versions from motorola to do this.
IIRC, I had a similar problem on my work PC originally. For some reason, the automatic detection wasn't set to check the Internet for drivers, so it was only looking on my laptop. Try checking that.
Did you try changing the phone settings so "USB debugging" was on? Sorry- I can't remember where the heck it is now. The settings on this phone to me are just wonkie. It's in there though. Try it with that turned on.
Usb debugging is in settings>applications>development
Sent from my DROIDX using XDA App
Turn USB Debugging off. Set USB connections to Mass Storage.
If you have autplay turned on, then Windows will offer to run/install the moto connect software. This version is slightly different ( from what reason?) from the one available at Moto's website.
Run that full install, THEN switch over to USB Debugging and allow it to install the drivers (Again)

Cannot Connect to PC AARGH!

Hi,
EDIT * I have found a solution in that I can connect via WI fi so that's pretty good but if anyone can help me with the USB issue, it would still be appreciated. It seems that the Wi Fi connection is more limited as I am unable to view things in explorer *
hoping to get some help using my USB to connect to my PC. I've installed Kies but when I try to connect to my PC it just keeps on trying to connect but never actually does it.
I have looked for guidance on this but keep coming across the instructions to go into 'about phone > USB settings' etc etc. However, I do not have a USB settings in about phone. In fact, there is nothing at all about USB in About Phone. I do have a 'USB Utilities' in Wireless and Networks but all that gives me the option to do is 'Connect Storage to PC'. I have a memory card in my phone.
When I do connect to the USB cable, with Kies open, when windows 'finds new hardware' it keeps saying a problem occurred during installation.
Please can anyone help me out? All I want to do is basically drag and drop some files from my PC to my phone. Thanks very much for your help.
Settings --> Applications -- Development --> USB debugging.
Thanks for that!
It got me a little further. I also unmounted then remounted the SD card. However, when I try to connect via kies I now get the message:
Reconnect the device in Samsung Kies (PC Studio) mode. Current connection mode not supported by Kies.
What am I doing wrong? Do I have to re click the USB settings on the phone before connecting to Kies now that it's installed the hardware on my PC?
Grimlocc said:
Thanks for that!
It got me a little further. I also unmounted then remounted the SD card. However, when I try to connect via kies I now get the message:
Reconnect the device in Samsung Kies (PC Studio) mode. Current connection mode not supported by Kies.
What am I doing wrong? Do I have to re click the USB settings on the phone before connecting to Kies now that it's installed the hardware on my PC?
Click to expand...
Click to collapse
Turn off USB-Debugging
Don't connect phone yet
Open Kies
Open the Tools menu -> Troubleshoot connection error
Go through the guide and let it reinstall the drivers.
Connect you phone, and let it connect
The default setting has the USB debugging tick greyed out. When I select it, it asks me if I want to allow debugging.
Do you mean that I shouldn't allow debugging and then connect (after reinstalling Kies) or should I allow it and connect? Sorry for my noobishness, Android is all completely new to me.
You should untick the USB-debugging - Then reinstall drivers NOT entire Kies
OK, it's unticked and I'm reinstalling the drivers via troubleshooting.
Do I need to unmount then remount the SD card before connecting my phone? Thanks for your help btw.
Shouldn't make a difference
Bah, I still have the same problem. It just says that there was a problem installing the hardware when I plugged in the phone.
After reinstalling the drivers, i shut down Kies then reopened it. I then plugged in the USB and then plugged the USB into my phone.
When I first installed Kies yesterday, Microsoft Active Sync kept on trying to activate and ask for a CD. It kept on holding up Kies. In the end I uninstalled Active Sync. Also, I still have Samsung PC Studio on my PC from when I had a Samsung a few years ago. It was one of those old slider phones, not a smart phone. Could that be part of the problem? I was hoping to keep it because it's proved to have the best media player I've ever had.
I just don't know what I'm doing wrong here.
Try without restarting Kies.
What part of the drivers aren't installed? (Check device manager)
In Device Manager, under Portable Devices there's something called Android MTP that has an exclamation mark next to it. It says it's not configured correctly and that 'No driver files are required or have been loaded for this device'. I'll reinstall the Kies drivers now.
Thanks for this help mljjlm
P.S. Now that I've unplugged the phone, the MTP thing isn't showing in the device manager list anymore.
Grimlocc said:
P.S. Now that I've unplugged the phone, the MTP thing isn't showing in the device manager list anymore.
Click to expand...
Click to collapse
Of course, it's a part of the phone, and it should not be plugged in because they would have to force a reboot when reinstalling drivers (which might sort your problem btw)
Reinstalled the Kies Drivers and then plugged in my phone but got the same problem. It says a problem occurred. Same device now has a problem in device manager. Maybe I should just uninstall everything and restart? Should I uninstall the old PC studio too?
Just try the reboot without uninstalling anything and then plug the phone in when your pc has booted
Argh! Still didn't work! I think there must be a problem with my PC, well, I'll try doing full uninstalls and reinstall it all. I have to go now as well so I'll have to try again tomorrow.
Thanks very much for your patience mljjlm. It has been greatly appreciated
Are you trying to just transfer files back and forth? If so... forget using Kies.
(I don't have a micro-USB cable with me currently, so this is all from memory)
Just remove the drivers from your device manager so it's like your machine has never seen your phone before. Then on your phone enable usb-debugging.
When you then plug in your phone, you should get a usb icon up top on your phone's display... pull the window-shade down and click on the USB connection button. You should get a fullscreen window on your phone that says something like USB Connection with the friendly android waiving.
Now your PC should see your phone as a standard USB mass storage device.
try plugging the usb cable in another usb port on your computer and than try again.
Grimlocc said:
All I want to do is basically drag and drop some files from my PC to my phone. Thanks very much for your help.
Click to expand...
Click to collapse
oinkylicious said:
Settings --> Applications -- Development --> USB debugging.
Click to expand...
Click to collapse
Grimlocc said:
when I try to connect via kies I now get the message:
Reconnect the device in Samsung Kies (PC Studio) mode. Current connection mode not supported by Kies.
What am I doing wrong?
Click to expand...
Click to collapse
You're using Kies, that's what you're doing wrong. You said in your very first post you wanted to be able to drag and drop some files from your PC to your phone, so use USB debugging (say yes when it asks you) and Windows Explorer.
If you are using a custom rom like Checkrom Revolution you will need to install the kies support from kitchen pro.
Also are you using the cable that came with your phone?
I have found a few microUSB cables that will allow charge and wont allow data transfer like the new ones for nokia devices and some blackberrys.
It worked! The USB debugging thing!
Thanks to everyone who helped me out. The forum said I was limited to 5 thanks per day so if you didn't get one of the thanks I apologise. Thanks very much!

Galaxy S5 wont show up as disk drive on Mac

I have the Developers Edition that i'm rooted on stock rom currently. When using the Samsung provided USB cable I'm not able to pull it up as a hard drive to access both sd cards. I never had this issue with Motorola or HTC they always showed up automatically. I have USB debugging checked as well as Kies3 uninstalled and then I reinstalled Android File Transfer then rebooted Mac. All that shows up is Verizon Mobile for about 30 seconds then nothing. Media options are MTP and PTP camera but Media Device USB greyed out. Android File Transfer does pop up but it wont let me manage device. I'm talking to Samsung live chat at the moment i'm posting this topic. Any ideas anyone?
UPDATE: FIXED used official kies uninstaller then reinstalled AFT and phone shows up as media drive.
Droid9684 said:
I have the Developers Edition that i'm rooted on stock rom currently. When using the Samsung provided USB cable I'm not able to pull it up as a hard drive to access both sd cards. I never had this issue with Motorola or HTC they always showed up automatically. I have USB debugging checked as well as Kies3 uninstalled and then I reinstalled Android File Transfer then rebooted Mac. All that shows up is Verizon Mobile for about 30 seconds then nothing. Media options are MTP and PTP camera but Media Device USB greyed out. Android File Transfer does pop up but it wont let me manage device. I'm talking to Samsung live chat at the moment i'm posting this topic. Any ideas anyone?
Click to expand...
Click to collapse
I have the same problem on the PC. See my post " [Q] USB "Media Device" PC Connection".
geronimo48 said:
I have the same problem on the PC. See my post " [Q] USB "Media Device" PC Connection".
Click to expand...
Click to collapse
I updated and its been solved.

LG V20 usb connection to pc problems

Trying to connect my phone to my pc running windows 10. i have installed all drivers (i think)
and the usb menu on the phone only comes up with usb debugging enabled in dev settings. i can select "file transfer" mode but nothing happens on the PC end. any help or advice would be much appreciated
qs504792 said:
Trying to connect my phone to my pc running windows 10. i have installed all drivers (i think)
and the usb menu on the phone only comes up with usb debugging enabled in dev settings. i can select "file transfer" mode but nothing happens on the PC end. and help or advice would be much appreciated
Click to expand...
Click to collapse
Same problem here.. LG doesnt take care of such things.. no wonder Samsung is taking the market..
I just connected my AT&T v20 to my aliensware 15r2 laptop and was able to import my pics with no issues setting my phone to ptp. Then to access both the internal storage and sd card through file manager I set phone to mtp.
I did nothing special just plugged in phone to laptop and selected what setting on the phone. Oh and running win 10. So don't think its the phones software but maybe your computer missing certain drivers or something. So hope this helps
Sent from my LG-H910 using Tapatalk
I had a problem on my Win 7 laptop. It connected, loaded drivers and opened as a removable drive. However, as I continued using the ?, my mouse started to register my clicks as drags and did so until I unplugged the ? .
Tappin' and talkin' with Tapatalk.
hmm. i still haven't been able to get it to work. might try using the LG PC suite pc app to connect over wifi
Anyone have issues after applying liquid spray for a screen protector? I just finished applying and now whenever I connect the phone LG V20 it still thinks its connected to usb. I restarted phone and it went into update firmware connection screen. I had to get into recovery and clear dalvik and cache and it rebooted and everything is working again. I transferred files from PC and again the same issue. Could it be liquid damage? Or is this something else? Thank you.
You'll need to turn on the Developer Option and then scroll down to Select USB Configuration > MTP > ok This is what I did to enable my desktop to read my LG V20 SD Card and memory.
Could it be a cable issue? I was warned once.
In fact, looks like nothing happens on my pc but I can browse the internal memory n sd card.
"Have you tried turning it off and on again?" - it crowd
Seriously That was the solution for me... (Oh, I miss that show so much )
i have connection problems myself but i was forced to do a hard reset after my touch screen failed and ehen ever i try to connect to pc i get device malfunctioned message and cant connect to pc and theres no was of changing to mtp or anything if i cant get intot he phone as far as i know if you have any ideas on pls let me know

Categories

Resources