Just thought I'd share, probably not news to many, that I bought on of these for £5.27 from Amazon UK for my MK802IV. Plugged into the OTG microUSB, enabled in settings and all works fine.
http://www.amazon.co.uk/dp/B00AKXE59E - "Micro USB 5 Pin 10/100 Mbps RJ45 LAN Ethernet Adapter for Tablet PC"
Peter
Peter Galbavy said:
Just thought I'd share, probably not news to many, that I bought on of these for £5.27 from Amazon UK for my MK802IV. Plugged into the OTG microUSB, enabled in settings and all works fine.
http://www.amazon.co.uk/dp/B00AKXE59E - "Micro USB 5 Pin 10/100 Mbps RJ45 LAN Ethernet Adapter for Tablet PC"
Peter
Click to expand...
Click to collapse
Awesome! Thanks for sharing the info since I am myself getting one. True HD video over Wifi just won't work. Have you tried any speed testing etc? Tried playing a BDRip etc?
I have not seen or heard what the micro usb will be used for on the NP....
The ADT-1 has a USB port and all it can be used for is a keyboard/mouse currently. I'd kill for OTG support. That said though, the ADT-1 also comes with a splitter for the power that adds an additional USB port to connect to your computer to access it via the SDK. So, it could be very much the same setup, or something completely different.
Interesting... You would think they would list the use for it.. maybe these OTG cables i have will come in handy..
It's been said that usb to ethernet adapters will work.
Read the update at https://plus.google.com/110558071969009568835/posts/dpSj5KtYP97
Hey pleasecan u help me in downgrading lg g3 stylus by saying the steps
Sent from my LG-D690 using XDA Forums
jestexman said:
I have not seen or heard what the micro usb will be used for on the NP....
Click to expand...
Click to collapse
You can connect an OTG cable to it. I connected a USB 3.0 HUB + Ethernet adapter to the OTG cable and connected my keyboard & mouse to the hub and a 64 GB micro SD card for extra storage. I also used the the ethernet port so now I don't need to connect through WiFi
lost2030 said:
You can connect an OTG cable to it. I connected a USB 3.0 HUB + Ethernet adapter to the OTG cable and connected my keyboard & mouse to the hub and a 64 GB micro SD card for extra storage. I also used the the ethernet port so now I don't need to connect through WiFi
Click to expand...
Click to collapse
What OTG cable and USB 3.0 HUB+Ethernet adapter are you using?
lschroeder said:
What OTG cable and USB 3.0 HUB+Ethernet adapter are you using?
Click to expand...
Click to collapse
I'm using a Ugreen OTG cable. I bought the 2 pack. The usb 3.0 hub is from Inateck. Links are below.
http://www.amazon.com/Ugreen®-Adapter-Samusung-Android-Function/dp/B00LN3LQKQ
http://www.amazon.com/Inateck-Gigab...id=1446168331&sr=1-2&keywords=inateck+usb+3.0
I change my phone to xperia x compact recently, I find the type-c USB is easy to use.
I have a otg usb drive with micro usb, which is working on samsung s7, dell tablet. I wonder if it can be used on XC.
Thanks
Not sure about your micro USB OTG drive, but I purchased a separate OTG type-C adapter which connects to my USB card reader just fine.
I tried to use a type-c to micro USB adapter, it doesn't work. Maybe I have to buy a type-c otg adapt first.
jiangjun413 said:
I tried to use a type-c to micro USB adapter, it doesn't work. Maybe I have to buy a type-c otg adapt first.
Click to expand...
Click to collapse
Yes I previously tried an adapter which failed as well
itandy said:
Not sure about your micro USB OTG drive, but I purchased a separate OTG type-C adapter which connects to my USB card reader just fine.
Click to expand...
Click to collapse
May I know what brand is your adaptor? I tried a couple of OTG type-C microSD card readers, but none of them work.. it simply don't seem to be providing power to the adaptor.
I could use a mouse using:
mouse -> usb to micro usb otg from z1 compact -> micro to usb c adapter
trewelu said:
I could use a mouse using:
mouse -> usb to micro usb otg from z1 compact -> micro to usb c adapter
Click to expand...
Click to collapse
Even this doesn't work for me. My phone seems not being able to act as USB host and not recognising anything plugged in the type-c port. My phone is rooted, not sure if it's the cause.
I use the sony type-c dual flash drive and it works flawlessly
Still not working. I used a voltage reader and found that there is no voltage coming out of the USB port, no wonder it won't detect anything. No sure if my phone is faulty (doubt it, as the port works perfectly when it is USB client) or due to setting/rom/kernel...
Sent from my F5321 using XDA Free mobile app
dohanin said:
May I know what brand is your adaptor? I tried a couple of OTG type-C microSD card readers, but none of them work.. it simply don't seem to be providing power to the adaptor.
Click to expand...
Click to collapse
Do you have a pop up screen asking you what to do when you connect anything to the USB port?
BTW, my USB OTG adapter is of a brand REMAX.
no, nothing happens as if the phone does not know something is connected. but works ok when connected to another host (pc or power source)
i'm using rooted 7.1.1 stock rom
Sent from my F5321 using XDA Free mobile app
itandy said:
Do you have a pop up screen asking you what to do when you connect anything to the USB port?
BTW, my USB OTG adapter is of a brand REMAX.
Click to expand...
Click to collapse
Thanks! Finally i got it to work. Sorry that I had been trying type-c usb reader instead of a true type-c otg adaptor + reader... so, it fact it would work with a type-c otg adaptor.
Bought recently a usb 3.0 lan dongle based on the realtek 8153 chip, which unfortunately does't work on my yoga book, any chance that i can make this work, there's any way to install drivers for this chip ?
btw i'm still on Android 6.0.1
DecebalusMagnus said:
Bought recently a usb 3.0 lan dongle
Click to expand...
Click to collapse
While Cherry Trail supports USB 3.0 the Yoga Book is only USB 2.0
jamespmi said:
While Cherry Trail supports USB 3.0 the Yoga Book is only USB 2.0
Click to expand...
Click to collapse
therefore in you're opinion there's no way to make it work ? any idea of a lan dongle that for sure will work ?
DecebalusMagnus said:
Bought recently a usb 3.0 lan dongle based on the realtek 8153 chip, which unfortunately does't work on my yoga book, any chance that i can make this work, there's any way to install drivers for this chip ?
btw i'm still on Android 6.0.1
Click to expand...
Click to collapse
I have a generic inland usb otg dongle, that I plugged an apple ethernet-to-usb dongle into. It took 1 minute, then started working. Im on android nougat, but have used same setup on a phone running aosp marshmallow.
Not sure what either are based on, but id think any generic made-for-usb-2.0 adapters would work
Does anyone have tested usb lan adapters with the 9T?
I used all the time a ASIX lan adapter in my old Moto X2 with Lineage OS, so i was wondering i anyone have a "working" adapter/IC with the 9T so i can get one for me?
thanks!
I tried LAN adapter on my mi 9t and i can confirm that sadly it doesn't work :/. It worked on my older Mi 4c but not on the recent models.
Dawidqo said:
I tried LAN adapter on my mi 9t and i can confirm that sadly it doesn't work :/. It worked on my older Mi 4c but not on the recent models.
Click to expand...
Click to collapse
good news! tried a "ASIX AX88178" usb 2.0 to gigabit adapter and worked fine! don't know if is only this one, but i think newer asix usb 3.0 will work too (usb on this phone is 2.0 only)
can scan LAN and get internet from it. just need to connect on a network with DHCP ( i don't think you can set manual ip on lan on android)
beware of cheap otg adapters, some of them (tiny dongle) does not have all GND and VCC pins, so they don't get a proper "multiple connection" pins to get better amperage from phone. usb lan adapter can use a bit of power from phone
malowz said:
good news! tried a "ASIX AX88178" usb 2.0 to gigabit adapter and worked fine! don't know if is only this one, but i think newer asix usb 3.0 will work too (usb on this phone is 2.0 only)
can scan LAN and get internet from it. just need to connect on a network with DHCP ( i don't think you can set manual ip on lan on android)
beware of cheap otg adapters, some of them (tiny dongle) does not have all GND and VCC pins, so they don't get a proper "multiple connection" pins to get better amperage from phone. usb lan adapter can use a bit of power from phone
Click to expand...
Click to collapse
Hi, can you tell me the steps to follow to make it work? I have a Mi9t Pro and a USB Lan X88179 adapter connected to an OTG to the mobile, but the internet does not work. How did you do it?
Can you explain this part to me?
"can scan LAN and get internet from it. just need to connect on a network with DHCP ( i don't think you can set manual ip on lan on android)"
Thank you.
Hi, i used a otg adapter cable (make sure it works correctly with a thumb drive for example, to make sure every thing is ok and detect the device)
then i just connected the lan adapter. i would appear as if it is not working, but you need to connect to a network router/switch/etc with the cable and the leds should light up on the lan adapter. to "properly" work, you need to connect to a device with DHCP enabled (by default all lan routers have this) so it will give the phone a IP and work normally. (a network icon should appear on the notification bar)
then you can disable wifi and see if there is internet (if have it in the router) or use the network analyzer to scan the network (if it detect the device and work, you will be able to scan the network and find the devices on it)
malowz said:
Hi, i used a otg adapter cable (make sure it works correctly with a thumb drive for example, to make sure every thing is ok and detect the device)
then i just connected the lan adapter. i would appear as if it is not working, but you need to connect to a network router/switch/etc with the cable and the leds should light up on the lan adapter. to "properly" work, you need to connect to a device with DHCP enabled (by default all lan routers have this) so it will give the phone a IP and work normally. (a network icon should appear on the notification bar)
then you can disable wifi and see if there is internet (if have it in the router) or use the network analyzer to scan the network (if it detect the device and work, you will be able to scan the network and find the devices on it)
Click to expand...
Click to collapse
My otg works by putting the usb memory (yes, it detects it, so OTG is right).
When I connect USB lan adapter (AX88179) to the OTG, the operation lights do not light. And the network icon does not appear on the mobile, and I havent internet. (However, with another Huawei mobile and the Huawei tablet the lights do turn on, the network icon appears, and the internet works via ethernet).
My router is connected in DHCP.
What could be the problem? I need to connect the 9t pro by cable but I can't find the way.
I thought it could be a problem with Xiaomi and 9t pro, but if you connect your 9t I suppose it is possible.
Why don't you use some small modem?
yaro666 said:
Why don't you use some small modem?
Click to expand...
Click to collapse
you mean connect the ethernet cable directly to a small modem and this via USB to the mobile? it would be to use the modem instead of the lan adapter, right? it's a good option, I can try it to see if it works for me.
But I still have the doubt as to why in Mi 9t pro the lan adapter does not work
perhaps the AX88179 is not supported... i tested mine ( AX88178 ) with MIUI and LineageOS and works on both,
malowz said:
perhaps the AX88179 is not supported... i tested mine ( AX88178 ) with MIUI and LineageOS and works on both,
Click to expand...
Click to collapse
Hello, I have gone to the Xiaomi store and another to fix mobile phones, in both they have told me that the ethernet option through an adapter to the 9t pro is not possible because my USB is only for transferring photos, videos (pendrive) but it is not compatible with connections. In developer options, the RNDIS option (USB ethernet) does not appear, which would be the one you would have to have to be able to do it. Do you have the RNDIS option in 9T? it would be: developer options -> default USB settings
RNDIS is for using usb <>usb connection to a computer and make a network over usb, NOT a usb lan adapter.
if usb support OTG (send power via usb to connect a device like usb pendrive) it means it "can" support any usb device, but depend only on the device to have drivers and support for the type of device.
Again, i've tested mine in MIUI and Lineage, and works fine. will post a video showing...
malowz said:
RNDIS is for using usb <>usb connection to a computer and make a network over usb, NOT a usb lan adapter.
if usb support OTG (send power via usb to connect a device like usb pendrive) it means it "can" support any usb device, but depend only on the device to have drivers and support for the type of device.
Again, i've tested mine in MIUI and Lineage, and works fine. will post a video showing...
Click to expand...
Click to collapse
Thank you for your answers. In the Mi community forum, users have the same problem as mine, updates from MIUI 10 do not work for the ethernet option (my MIUI is 12.0.3.0. Another girl asked Xiaomi directly and in an email They answered that they had eliminated that option for not going "with their philosophy" (they are also eliminating the headphone jack connection in many mobiles, it can only be used by bluetooh). This is the general trend, I cannot find anyone who has found a solution Only you! Even in this forum there is a thread about rooting the mobile to make it work with ethernet (but it is too complicated for me). Also other people on the forum work the lan adapter by activating RNDIS in the developer options.
So far, none of this has worked for me.
Summary: Since I don't know exactly what the problem or compatibility is, I am going to try the AX88178 lan adapter. So, wish me luck!
Video (sorry for the low quality, i only have a very old extra phone)
malowz said:
Video (sorry for the low quality, i only have a very old extra phone)
Click to expand...
Click to collapse
Hello! I'm writing to you from my Xiaomi 9t pro in airplane mode with an ethernet cable connected. You were finally right, now it works with the AX88178!! Thanks thanks!!!
Great! if anyone knows a 10/100 adapter that works too with 9T, please share.
10/100 are slower, but consume less power. would be nice to have the option
malowz said:
Great! if anyone knows a 10/100 adapter that works too with 9T, please share.
10/100 are slower, but consume less power. would be nice to have the option
Click to expand...
Click to collapse
This is mine https://www.amazon.es/Plugable-USB2...(“chipset”+ASIX+AX88178&qid=1611769255&sr=8-2
evamel5 said:
This is mine https://www.amazon.es/Plugable-USB2-E1000-Adaptador-Ethernet-Negro/dp/B003VSTDFG/ref=mp_s_a_1_2?dchild=1&keywords=(“chipset”+ASIX+AX88178&qid=1611769255&sr=8-2
Click to expand...
Click to collapse
mine is the same, without the case. but this one is gigabit over usb 2.0 (max around 400mbps).
a 10/100 would be enough for me, smaller and with less power consumption. will try to find a compatible chip from asix perhaps in the future
AX88179 = usb 3.0, yours that wasn't working
asix has these usb 2.0 to 10/100 lan IC's:
AX88172A
AX88772A
AX88772B
AX88772C
will try to find any in Brazil.
something like this:
Amazon.com: USB to RJ45 LAN Ethernet Adapter 100Mbps USB to RJ45 LAN Converter 10M 100M with Asix AX88772B AX88772 Chip (Type C to RJ45) : Electronics
Buy USB to RJ45 LAN Ethernet Adapter 100Mbps USB to RJ45 LAN Converter 10M 100M with Asix AX88772B AX88772 Chip (Type C to RJ45): USB Network Adapters - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
or this:
Amazon.com: Plugable USB 2.0 to Ethernet Fast 10/100 LAN Wired Network Adapter Compatible with Chromebook, Windows, Linux: Computers & Accessories
Buy Plugable USB 2.0 to Ethernet Fast 10/100 LAN Wired Network Adapter Compatible with Chromebook, Windows, Linux: USB Network Adapters - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
i will test hubs and network + hub in the future also
EDIT:
If connecting on a network without DHCP, you can add manually the ip by using "ifconfig eth0 192.168.1.100" in termux for example. i believe needs root for that. ("su" before running ifconfig)
without setting manual ip on network without DHCP, the network won't work .
EDIT2:
my brother has the tp-link usb 3.0 to gigabit USB adapter, also did not work. The chip is Realtek RTL8153.
malowz said:
mine is the same, without the case. but this one is gigabit over usb 2.0 (max around 400mbps).
a 10/100 would be enough for me, smaller and with less power consumption. will try to find a compatible chip from asix perhaps in the future
AX88179 = usb 3.0, yours that wasn't working
asix has these usb 2.0 to 10/100 lan IC's:
AX88172A
AX88772A
AX88772B
AX88772C
will try to find any in Brazil.
something like this:
Amazon.com: USB to RJ45 LAN Ethernet Adapter 100Mbps USB to RJ45 LAN Converter 10M 100M with Asix AX88772B AX88772 Chip (Type C to RJ45) : Electronics
Buy USB to RJ45 LAN Ethernet Adapter 100Mbps USB to RJ45 LAN Converter 10M 100M with Asix AX88772B AX88772 Chip (Type C to RJ45): USB Network Adapters - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
or this:
Amazon.com: Plugable USB 2.0 to Ethernet Fast 10/100 LAN Wired Network Adapter Compatible with Chromebook, Windows, Linux: Computers & Accessories
Buy Plugable USB 2.0 to Ethernet Fast 10/100 LAN Wired Network Adapter Compatible with Chromebook, Windows, Linux: USB Network Adapters - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
i will test hubs and network + hub in the future also
EDIT:
If connecting on a network without DHCP, you can add manually the ip by using "ifconfig eth0 192.168.1.100" in termux for example. i believe needs root for that. ("su" before running ifconfig)
without setting manual ip on network without DHCP, the network won't work .
EDIT2:
my brother has the tp-link usb 3.0 to gigabit USB adapter, also did not work. The chip is Realtek RTL8153.
Click to expand...
Click to collapse
thanks! Yes, it consumes battery. the option you say would be good. I want to ask you something: on the box of the pluggable USB 2.0 it says: warm cancer and reproductive, for p65 California. I have read that it may be from the lead. Is that why you don't have the case on your adapter?
evamel5 said:
thanks! Yes, it consumes battery. the option you say would be good. I want to ask you something: on the box of the pluggable USB 2.0 it says: warm cancer and reproductive, for p65 California. I have read that it may be from the lead. Is that why you don't have the case on your adapter?
Click to expand...
Click to collapse
???? no... its because the original cable was bad and i soldered a new one... as i didn't like the bulk case, i just put heat shrink tube and glue
malowz said:
???? no... its because the original cable was bad and i soldered a new one... as i didn't like the bulk case, i just put heat shrink tube and glue
Click to expand...
Click to collapse
Ahh ok!! Here de message in box.