Database Users

Post Your Current or Last Boot Issues here (READ BEFORE POSTING PLEASE)

Hi A7 users,
Let's start this off be saying, bare with me English is not my primary language.....
OK now, the reason for this Thread is to find a definite solution for current users and future users who have run into boot issues cuz they were trying to :
A- Go back to Un-rooted and lock bootloader state.
B- Started Playing with root tools and make a huge mistake
C- Started playing with twrp not knowing what they were doing
D- All the above + started flashing images files and got worts.
E- Any other type of situation.
I Know we make mistakes and we learn from them and well here today we are going to try or rather say Find a permanent /define solution to all this issues with your help, so PLEASE ONLY POST IF YOU HAVE RUN INTO ANY OF THIS ISSUES AND HOW YOU GOT INTO THE ENCHILADA ( MESS ) .
If you have the solution to your previous boot problems send me a PM and I'll keep this Thread updated for everyone to see with your solution and of course credit to the user/s.​
NOTE : Please mention which Axon 7 you are using e.g. :
- A2017 (Chinese Variant)
- A2017U (USA Variant)
-A2017G (UK/Europe/International Variant)

reserve 1

reserve 2

reserve 3

reserve solution 4

reserve solution 5

Anyone this issues please post you issue, how to got into the problem, device model and if you got it fix let us know.

https://www.youtube.com/shared?ci=05LD4Ja-h3k
You'd think with all the other posts about problems there'd be something here by now.
Always thank those who are helpful...and just ignore those who aren't.

Mine happened when I wiped Internal storage from twrp. This caused the phone to only see 4gb of internal storage. Came to xda and it was suggested to flash back original boot.img. once that was done 4gb issue was fixed and the radio was gone.
I did indeed try every solution offered (thanks again for all the effort, DrakenFX and others). But, I've come to the conclusion that this is not going to get fixed until XTE releases US images. For other people's sake I hope I am wrong, but I myself decided to proceed with the exchange where I bought it, as I was right at the end of my 14 days (newegg doesn't seem to give the 30 days that xte does). I may be out of an Axon 7 for a while, so for now I am on my amazon ads, Blu R1 HD (with ads defeated

Is there a guide to go back to stock for the A2017G?
i'm on B02 with root and the bootloader still locked.
Like to go back to stock now that ZTE is working on an update to give the A2017G an unlocked bootloader.

Hi all,
I am currently experiencing a bootloop on my Chinese Axon 7. Some of you regulars may have seen me asking in other threads because I've tried to fix it myself, but I've kind of run out of options. Sincerely hoping one of you can help me out!!! I'll buy the winner a beer or 2, haha!
Back story:
Was on B07 with root (tenfar's tool) with locked bootloader and had some issues with the ROM. Like vibrating when I opened the camera and battery drops. So I decided to upgrade to B09. Placed the OTA on SD card and went to: Settings -> update. Worked fine. So I connected it to my PC and made a dump (tenfar's dump tool) of my recovery and boot and stored them. Then I ran the Tenfar's tool, the B09 version and it went like the last one. But when I booted I didn't have wifi, and other issues came up. So I thought: did I make a mistake? So I read it again, checked the COM port again... all checked out. And used Tenfar's tool again. After that it didn't even boot anymore! It plays the nice boot animation and then gets stuck on the end screen with all the pictures.
So after that I restored my dumped recovery.img and boot.img. This is when I knew something was wrong: it still didn't boot! I reset data/cache in the stock recovery: no boot. Still stuck at the end of the boot animation.
What I've tried:
- Flashing the stock B09 update.zip with TWRP.
- Flashing the stock B09 update.zip without updater-script 'assert' and 'get-prop' line. TWRP says 'update.zip is corrupt'. Doesn't install.
- The I put it on SD card and internal memory and tried updating it with stock recovery: 'sorry you cant sdcard upgrade'. That's all it says.
- ADB sideload stock recovery: 'cannot load update.zip'.
I tried different ADB versions, Windows and Mac, different drivers... I tried formatting SD card as FAT32.. Tried different SD card.. Doesn't make a difference.
TWRP log says it can't pass the Zip verification when I try that. If I turn that off it says re.product.name is wrong. But I checked build.prop and updater-script. It's the same! But somehow TWRP comes up with a different one. Also tried removing getprop and assert lines from updater-script. But then it says: ZIP file is corrupt.
TWRP log after trying original, stock B09 flash:
http://pastebin.com/cJivE2TK
Build.prop: moved from /system with TWRP:
http://pastebin.com/b6rryc2n
Build.prop: ro.product.name=P996A03
Updater-script:
Code:
getprop("ro.product.device") == "ailsa_ii" || abort("This package is for \"ailsa_ii\" devices; this is a \"" + getprop("ro.product.device") + "\".");
assert(getprop("ro.product.name") == "P996A03");
But TWRP log: ro.product.name=cm_ailsa_ii
So, yeah, I've been trying on and off for the past couple of days in between work and travelling. Got a back-up phone so it's not that bad. But I really like this phone! It's just been such a pain in the ass the past few days...
I tried researching online and reading all the XDA posts. It is my fault this has happened and feel such a newb for not being able to fix it myself
Many thanks in advance!

aPexalpha said:
Hi all,
I am currently experiencing a bootloop on my Chinese Axon 7. Some of you regulars may have seen me asking in other threads because I've tried to fix it myself, but I've kind of run out of options. Sincerely hoping one of you can help me out!!! I'll buy the winner a beer or 2, haha!
Back story:
Was on B07 with root (tenfar's tool) with locked bootloader and had some issues with the ROM. Like vibrating when I opened the camera and battery drops. So I decided to upgrade to B09. Placed the OTA on SD card and went to: Settings -> update. Worked fine. So I connected it to my PC and made a dump (tenfar's dump tool) of my recovery and boot and stored them. Then I ran the Tenfar's tool, the B09 version and it went like the last one. But when I booted I didn't have wifi, and other issues came up. So I thought: did I make a mistake? So I read it again, checked the COM port again... all checked out. And used Tenfar's tool again. After that it didn't even boot anymore! It plays the nice boot animation and then gets stuck on the end screen with all the pictures.
So after that I restored my dumped recovery.img and boot.img. This is when I knew something was wrong: it still didn't boot! I reset data/cache in the stock recovery: no boot. Still stuck at the end of the boot animation.
What I've tried:
- Flashing the stock B09 update.zip with TWRP.
- Flashing the stock B09 update.zip without updater-script 'assert' and 'get-prop' line. TWRP says 'update.zip is corrupt'. Doesn't install.
- The I put it on SD card and internal memory and tried updating it with stock recovery: 'sorry you cant sdcard upgrade'. That's all it says.
- ADB sideload stock recovery: 'cannot load update.zip'.
I tried different ADB versions, Windows and Mac, different drivers... I tried formatting SD card as FAT32.. Tried different SD card.. Doesn't make a difference.
TWRP log says it can't pass the Zip verification when I try that. If I turn that off it says re.product.name is wrong. But I checked build.prop and updater-script. It's the same! But somehow TWRP comes up with a different one. Also tried removing getprop and assert lines from updater-script. But then it says: ZIP file is corrupt.
TWRP log after trying original, stock B09 flash:
http://pastebin.com/cJivE2TK
Build.prop: moved from /system with TWRP:
http://pastebin.com/b6rryc2n
Build.prop: ro.product.name=P996A03
Updater-script:
Code:
getprop("ro.product.device") == "ailsa_ii" || abort("This package is for \"ailsa_ii\" devices; this is a \"" + getprop("ro.product.device") + "\".");
assert(getprop("ro.product.name") == "P996A03");
But TWRP log: ro.product.name=cm_ailsa_ii
So, yeah, I've been trying on and off for the past couple of days in between work and travelling. Got a back-up phone so it's not that bad. But I really like this phone! It's just been such a pain in the ass the past few days...
I tried researching online and reading all the XDA posts. It is my fault this has happened and feel such a newb for not being able to fix it myself
Many thanks in advance!
Click to expand...
Click to collapse
PM I'll help you create a flashable zip base on B10 (Full update release), just make sure to have the following apps:
- 7Zip
- Notepad++

I am was rooting my axon a2017 on b10 chinnese version without any backup after rooting got password screen after boot then i was do factory reset and format data and all looking good but after that i saw that i dont have google play app so i installed macro gapps 6.0 after flashing phone stuck on axon screen (after zte logo) for long time i been wait up to 30 minutes and nothing was done..also i have the message on twrp about the modification(dont understand why i have this message all the time) i saw in xda forum that need to install supersu so i search on internet and was flash super su 2.65 and then when i am was boot device go to zte logo screen and then turning off when i connect the device as mtp device named as a2017u (whats worng with it??? I was flashed b10 root boot.img)
I regret about this root and want to back all to stock without any problems need help from someone
I need stock b10 boot.img if someone can upload
Many thanks!
---------- Post added at 04:23 AM ---------- Previous post was at 04:11 AM ----------
DrakenFX said:
PM I'll help you create a flashable zip base on B10 (Full update release), just make sure to have the following apps:
- 7Zip
- Notepad++
Click to expand...
Click to collapse
Its will help me too i think

Dear All,
ZTE Axon 7 A2017 (Chinese version) Stuck on Bootloader mode.
Device after power on will Stuck on ZTE logo even power button press longer also will Off and came back to square one and the only way to power off is via selection on bootloader page via volume button which consists of Recovery mode, Power Off, Bootloader and some other mode which I can't recall.
History of this issue. Please bear with long story.
Manage to install MM ROM with B13 via sd card installation via update software in phone setting. follow by Unlocked bootloader and Install TWRP 3.1.1.0 then try few different ROM until one day when I use Xiaomi flashtool my PC crash half way through during flashing resulting in device with Pure Chinese ROM and TWRP also got corrupted, when I said corrupted because I install TWRP 3.1.1.0 but when I go to Recovery mode it shows TWRP 3.0 something. with this corrupted TWRP when I try to install ROM it will show loading but end result is NIL meaning same ROM nothing change.
Until this stage I never did a TWRP backup because all this while the ROM is Not my type of ROM from this junction when I boot back to TWRP and I did Advance Wipe most of it except external sd card thinking that I may be able to install fresh TWRP but my Recovery TWRP is residing in phone storage resulting in No more TWRP recovery software. next thing I did was I connect phone to PC and ran adb fastboot tool to detect device and managed to detect device in recovery mode and I make decision to Locked back the bootloader and did just that and Locked bootloader is Succes and it also Erased everything during the process.
To cut short the story after Locked back bootloader only Bootloader mode is accessible and when I connect to PC and enable Recovery mode (Black screen) and EDL mode (Black screen) from Windows PC Device Manager COM port able to see Qualcomm 9008 for this 2 mode.
I must admit after few days of trying to resolve this Stuck Bootloader issue I almost give up.
Then I remember this Woodo magic by jcadduno which recommends XM flashtool version 2016.08.30.0 but unable to flash after trying few version Xiaomi flashtool and the very latest and I mean from Xiaomi Flashtool webpage http://xiaomiflashtool.com/
version 20170425 that break the ice and finally able to load A2017U ROM because this US ROM my phone No Network detected.
From here onwards I unlocked bootloader and install back TWRP (Installation of TWRP via Axon7toolkit) because of Network issue since I got TWRP I install back A2017 ROM but still Not satisfied because Chinese ROM certain Apps having issue because of Google services and I chance upon this Conversion A2017 to A2017U ROM (Hybrid ROM caused ROM is US and Modem from Chinese Modem)
that I'm stay put right now and my phone now is A2017U model.
I hope this experience can help others with similar Stuck bootloader and those who wish to convert A2017 to A2017U ROM.
below is the link that I described Woodo magic.
https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
Straight forward Axon7toolkit, please don't use Chrome browser cause Chrome will Automatically Delete it after complete download for my case I used Microsoft Edge.
https://forum.xda-developers.com/axon-7/development/tool-axon7toolkit-t3573108
below is the link to Hybrid ROM for A2017U
https://androidfilehost.com/?fid=457095661767154458 by Michael Warner After flash install No verity patch for the bootloader.
Cheers.

I am stuck in a position where I can restore my nandroid backups but get Error 7
when trying to reinstall any Rom on a2017u I was able to fix the unlocked bootloop
by the EDL method. The Rom's are the same as the backups. I think I tried to role back to B29 Causing the bootloop) and have had problems ever since.
Should I try flashing A2017Uv1.1.0B32_Bootstack_by_DrakenFX since the Rooms are all B32?
The B15 and B19 Nandroid's still Restore fine.

Hello all,
i don't get onto forums very often but i thought this was a nice one to add to. i've rooted a few motorolas, a few ztes, a cat; i've also bricked those ztes, cat & a few samsungs. i'm dealing with two Axon7U's; one is factory MM-b29, the other is N-b35.
while screwing around with TWRP, i bricked the b35 (the b29 has been bricked for a month at this time) after i had it almost perfected. by perfected i mean a custom recovery & root user access fully acquired. with DrakenFX's {YOURS; thanks so much. i'm learning to get along with linux} extensive files created to save people from themselves i was able to unbrick the b35. albeit its CELLULAR DATA became unhinged; that's something i could've lived with except it was a loaner and had NO CAMERA! it's camera (along with the ability to push both volume buttons at once for say EDL mode...) was damaged having been beaten across a steering wheel several times. so with my newfound unbricking superpowers i decided to take another crack at the b29. managed to get it unbricked but couldn't get it setup with both TWRP & SuperSU without losing one, the other or, both. at times it didn't even boot up. i was doing pretty much everything cited above for reasons 'why'. best way to learn is by trial & error (if one can afford it).
the b29 is rooted right at this moment; i'm working on it as soon as i leave this posting. i used Axon7_EDL_Tool. i used Axon7root. i used MiFlash. i used Fastboot. I used ADB App Controller software too. back & forth i fought for three days mostly due to downloading glitches and i prevailed. i manipulated a stock OTA full system update.zip by happenstance and it Auto_Updated over itself. in other words it already had the same ROM installed. i don't know what it tested to realize it needed to update to what it already had. it didn't have CELLULAR DATA either. just like the b35, it broke somehow while flashing TWRP or SuperSU. funny thing is it still wanted to update that same ROM after it did. while perusing the system update setting(s) i noticed it had downloaded N-b15 and it wanted to update b29 AGAIN! i opted for the Nougat update. it did alright and appears to have fixed it's CELLULAR DATA too. i haven't looked at it since but i'm confident i can gain root user access with a minimal amount of effort.
The main problem i've had with dealing with bricked devices is the age of the file downloads. most of them are simply GONE!, expired links and whatnot. if i'd had a clear path say from a custom recovery and rooted boot image of my factory version or the path that leads to it, i'd have been fixed up long ago. i've found partial 'paths' if you will that almost get me there but no quite all the way. flashing images & zips through fastboot are different from their counterparts entered through TWRP or Emergency Download Mode which of course are both different too. three different ways to get into one's phone makes it almost impossible to keep them perfected.
i'm not sure i did what i'm supposed to regarding this thread. Thank you DrakenFX for your time & knowledge; you've saved my old Axon7!

Hello all update;
b35 Nougat phone is retired. b29 managed to update itself to b35 7.1.1. however, its CELLULAR DATA is still broken. i haven't managed to figure out how or where it's broken so i cannot fix it.
what i'm trying to do now is flash Magisk instead of SuperSU and using a TWRP version 3.0.3-1. heck i've used all of TWRP's versions in my efforts to reacquire CELLULAR DATA.
crazy part is the phone knows its CELLULAR DATA carrier and freely displays all of its hookup info. this is very frustrating.

I upgraded to Nougat Manually and it half worked :S

So I followed a tutorial online to install Android Nougat 7.0 on my Huawei P9 lite. Once I was in TWRP I realised I was supposed to install two update files from two different .zip files. Trouble is I only had the one update on my phone at the time. I didn't want to exit TWRP at that stage because I already installed one of the update files.
When I booted my phone after the update, it all seemed to be working with 7.0 installed. Then I noticed my internet data wasn't working outside of wifi, and my bluetooth isn't turning on. The rest seems to be running fine other than those two things.
I rely a lot on bluetooth and internet on the go. I need it back, does anyone know what I could do, outside of factory reset?
Thanks

factory reset wouldn't help, you need to reflash update.zip and data_full.zip AT SAME TIME without rebooting

Coolyou said:
factory reset wouldn't help, you need to reflash update.zip and data_full.zip AT SAME TIME without rebooting
Click to expand...
Click to collapse
Okay, I realised that just now. Trouble is I am having trouble booting into TWRP now. I just get "your device has been unlocked and can't be trusted." with an orange web link.
For some reason my phone says in the settings that I'm still on android 4.3 although the ui and functionality is 7.0. Also, the EMUI is 2.0. I don't know how I got TWRP working before but I think there's a conflict due to it half being 7.0 so recover won't boot. I have tried loads of tutorials online but none of the rocovery.img or twrp.img files are working.

have the exact same problem, on android 4.3 and stuck.
from what i understand to dload a working stock rom, you need to have the correct oem info that matches the recovery stock rom. i cant flash any OEMinfo as i cant get root from revolution recovery.
no access to Data partition either.
no other recovery's to install as its the only one for nougat.
So i need help for this issue too.

jackvdbuk said:
have the exact same problem, on android 4.3 and stuck.
from what i understand to dload a working stock rom, you need to have the correct oem info that matches the recovery stock rom. i cant flash any OEMinfo as i cant get root from revolution recovery.
no access to Data partition either.
no other recovery's to install as its the only one for nougat.
So i need help for this issue too.
Click to expand...
Click to collapse
I fixed it! It was more simple than I realised. I used the dload folder method; Placing the update.app into a folder called 'dload' on an sdcard. Then holding power, both volume buttons to initiate the update.
Thanks for your help guys!!

Stock Recovery?

Does anyone have or know where to get a stock recovery image for the BTV-W09?

When I flashed the US "003" update manually through the dload folder method, my TWRP was replaced by the stock recovery. I have left it there, and since flashed TWRP to recovery2. The update failed, but I ended up with stock recovery and the tablet no longer rooted. I would try that first. If that doesn't work for you and if you are on the US version "002" firmware let me know and I should be able to send you a backup of my recovery partition bit if you need the eRecovery from the recovery2 partition, I will be unable to help you.

I am on the US version “003”, I updated before flashing TWRP and rooting. TWRP was flashed recovery not recovery2. No worries though, Im sure someone will post a recovery as rooted people will be needing to flash OTA updates soon.

If you are on "003", try updating the unzipped "Update.Zip" from the dload file. I found a copy of the update.zip on my internal SD in directory called HwOUC. If you can't find it, I still have my file. The Update will most likely fail, but that should give you the standard recovery back. then I suggest you flash TWRP to Recovery2. TWRP actually is easier to access from Recovery2 becuase all you have to do is hold the volume up key down for a few seconds from the unlocked bootloader screen to boot into TWRP. Once you have TWRP re-installed you can then just flash the super user zip file to regain your root.
I am not sure if it is because I now have unlocked the bootloader, have recovery2 with TWRP or updated the file to enable the 5Ghz modem , but even with having the standard recovery partition back my system did not pass the altered system check and allow me to flash the OTA. I am not quite experienced enough to try and use Flashfire to force the update, since there is a warning about Huawei devices being easy to hard brick. Hopefully someone who has updated and then rooted will post an .img file of the updated system partition so it can be flashed with TWRP (at least I think that is what those of us who have already rooted will need to do).

I looked for the update.zip but it doesn’t exist anywhere. These updates are usually removed after the update completes successfully. Plus I’ve done a factory reset since updating, which may have deleted it. I wanted to see if enabling the 5GHz radio would stick after the reset (it did). The 5GHz radio hack was really my only reason to root. I didn’t alter my system partition with TWRP, so I may still be able to take an OTA update if I had the factory recovery. Ive stopped rooting all of my non Nexus devices. Since Google releases almost monthly security updates which usually unroots anyway it’s just too much hassle to keep root. If you want to post the update.zip somewhere I could give it a try, if not that’s cool. Im sure a factory image will be available at some point.

I have posted the Update.zip file to the following location:
http://www.mediafire.com/file/ug1pe2w38ddkxm9/update.zip
Let me know how things go.

Coming from a Nexus 7 I'm use to many of the img files you flash for restoring.
Using update extractor I now see many of those files (003 update) and some I have no idea about or how to flash them.
BOOT.img - OK
CRC.img - ?
CURVER.img - ?
EFI.img - I know what EFI is just never flashed it on an Android device.
FASTBOOT - OK
FW_HIFI.img - ?
FW_LPM3.img - ?
RECOVERY.img - OK
SENSORHUB.img - ?
SHA256RSA.img - No what it is normally but never flashed.
TEEOS.img - ?
TRUSTFIRMWARE.img - Interesting, but have no idea. - ?
VERLIST.img - ?
XLOADER.img - ?
Like many of us I'm in the same boat. Unlocked, Flashed recovery and rooted and cannot install update 003.
I've flashed the recovery.img from update 03. I've done a factory reset a few times. Odd enough it maintains 5Ghz wifi after doing a reset. I'm stumped and not sure of so many of the other .img files. Might one of them help me get the update to pass if I flash it. That or we wait for a full release and not an OTA to grab all the files we need. Really think I need system.img to make it work but the update doesn't include it.

Thanks johe for providing the 003 update.zip. I may try flashing the recovery.img this weekend. Ill let you know how it goes.
Jmjm003, I believe the issue with updating with the OTA is due to changes detected in the system partition after rooting/unlocking. Im not sure of a way around this other than flashing the full system partition, and we don’t have the factory ROM available yet. Im also new to Huawei devices and their partition structure so hopefully the development community will grow around this device and provide better solutions. I also can confirm the 5GHz stayed enabled after a factory reset, the question remains would it hold after an OTA update.

Possible brick, cannot enter TWRP

So I loved this phone long time ago, but after I got a new one, I decided to play with P9 Lite. I installed installed lineage, I had fun for a while, but I decided I want the stock soft once again. During 'rollback', something has happened and possibly bricked the phone. I forgot about it because I had some things to do in life, but now I came back to fix it...but I don't know how. It is still on a bootloop, but I can launch fastboot. I flashed some of twrp's out there, but I still cannot enter any of them. I can't use dload method, because it doesn't work either. Can anyone help me, please?

Try to go into the stock recovery , and if is possible do a cache wipe. Check if the bootloader is locked or not ( because after some operations it may be locked again ) and then try to flash a recovery in recovery and also in the Erecovery partitions.

i have same situation, flashed a lot of twrp, still cant enter none

Return back stock recoveries. I really don't think that TWRP will help you now. With stock recoveries reinstalled, try to flash B160/B161 (depending on if you have dual/single SIM) (you can choose pretty much any stock A6 version, but I think that B160/B161 is the best of all.). After a successful flash, a factory reset should start.. I think that you don't even need an unlocked bootloader or FRP.
NEVER EVER flash the rollback package two times in a row. And also, DO NOT flash Android 7 (B3xx/B5xx). Both of these actions will result in the need of DC Phoenix. Or even into a useless brick.

Bootloop problem with my new S8

Greetings everyone,
today I purchased a new G950F S8. Immediately I wanted to root the device, and in order to do so - installed TWRP via Odin 3.13.3 (flashed the newest version for Exynos models downloaded from their web-site). The flashing process went through fine - everything checked out, at least seemingly.
When I first restarted my phone (followed the instruction), it booted up in it's default recovery, NOT TWRP recovery. That seemed strange, so I double checked the instruction - which claimed I need to quickly boot into recovery, as soon as the flashing process is done and the phone is first restarted. Maybe I was slow.. I re-flashed TWRP, and this time it booted into TWRP. Now, this is when the problem started.
I didn't touch anything within TWRP, I was just satisfied to see it installed. When I tried to restart into System, I got the Samsung logo bootloop. I couldn't power off the phone, nor could I boot it up. I could, however, alternate between download mode and TWRP. I tried changing System format and then changing it back to original (saw that somewhere), but it didn't help. Tried factory reset without results.
Finally I downloaded official stock ROM for Italy, flashed via Odin and everything works fine.
Thing is - I really want to root my phone. Had no issues with my Note 3 previously. I wouldn't want to get into more trouble, so I'm kindly asking for some advice, or a useful link (I searched all over but didn't find anything that would make me feel confident enough not to screw it up again) to how I can do this safely.
I'm using Android 9, official stock ROM for Italy.

Misce said:
Greetings everyone,
today I purchased a new G950F S8. Immediately I wanted to root the device, and in order to do so - installed TWRP via Odin 3.13.3 (flashed the newest version for Exynos models downloaded from their web-site). The flashing process went through fine - everything checked out, at least seemingly.
When I first restarted my phone (followed the instruction), it booted up in it's default recovery, NOT TWRP recovery. That seemed strange, so I double checked the instruction - which claimed I need to quickly boot into recovery, as soon as the flashing process is done and the phone is first restarted. Maybe I was slow.. I re-flashed TWRP, and this time it booted into TWRP. Now, this is when the problem started.
I didn't touch anything within TWRP, I was just satisfied to see it installed. When I tried to restart into System, I got the Samsung logo bootloop. I couldn't power off the phone, nor could I boot it up. I could, however, alternate between download mode and TWRP. I tried changing System format and then changing it back to original (saw that somewhere), but it didn't help. Tried factory reset without results.
Finally I downloaded official stock ROM for Italy, flashed via Odin and everything works fine.
Thing is - I really want to root my phone. Had no issues with my Note 3 previously. I wouldn't want to get into more trouble, so I'm kindly asking for some advice, or a useful link (I searched all over but didn't find anything that would make me feel confident enough not to screw it up again) to how I can do this safely.
I'm using Android 9, official stock ROM for Italy.
Click to expand...
Click to collapse
Bro stick with stock you got a nice expensive phone you don't need to chance messing it up
Thot Conqueror

Misce said:
Greetings everyone,
today I purchased a new G950F S8. Immediately I wanted to root the device, and in order to do so - installed TWRP via Odin 3.13.3 (flashed the newest version for Exynos models downloaded from their web-site). The flashing process went through fine - everything checked out, at least seemingly.
When I first restarted my phone (followed the instruction), it booted up in it's default recovery, NOT TWRP recovery. That seemed strange, so I double checked the instruction - which claimed I need to quickly boot into recovery, as soon as the flashing process is done and the phone is first restarted. Maybe I was slow.. I re-flashed TWRP, and this time it booted into TWRP. Now, this is when the problem started.
I didn't touch anything within TWRP, I was just satisfied to see it installed. When I tried to restart into System, I got the Samsung logo bootloop. I couldn't power off the phone, nor could I boot it up. I could, however, alternate between download mode and TWRP. I tried changing System format and then changing it back to original (saw that somewhere), but it didn't help. Tried factory reset without results.
Finally I downloaded official stock ROM for Italy, flashed via Odin and everything works fine.
Thing is - I really want to root my phone. Had no issues with my Note 3 previously. I wouldn't want to get into more trouble, so I'm kindly asking for some advice, or a useful link (I searched all over but didn't find anything that would make me feel confident enough not to screw it up again) to how I can do this safely.
I'm using Android 9, official stock ROM for Italy.
Click to expand...
Click to collapse
When you first flash twrp and boot into twrp you have to format phone from within twrp, then flash no Verity zip and rmm bypass zip. If you reboot system before you format then you get bootloop. There is full instructions in a thread here on XDA.