i'm newbie, please give me solution xda IIi with error camera and show "Failed to initialize camera please reset the hardware".
i try upgrade with file
Modified XDA_IIi_Upgrade_v1.11.162_Radio_1.04_Camera_Fixed
and
Alpine_Ext-1.11.162_Radio-1.04_O2stuffstripped_Camera_Fixed
but still trouble
thank's
are u having problems with the battery going flat at an alarming rate???
When you press the camera button on the side does it go to WMP
by now this question SHOULD BE in a FAQ cos it is asked a bit. Only way to sort it and this is a temp fix is a hard reset. but it can fail at anytime, and yer battery goes flat quickly 1/2 a day tops!!. Basicly the board needs replacing. Sorry not good news. the O2 units have 2yr warranty.
take it back they send it off. (mark the warrant void label with a pen so you can tell if they have been inside it) When you get it back try it, if the board has been replaced (check the info in device info) then it will be cool, if not replaced then call the repair center n say its still no good. they send you a box, ship it back n you get a board replacment
thank's for your answer,.. ,..my o2 not warranty,...
any idea for software or hardware solution ..
than's
try run the application manually.... /Windows/Camera.exe
what happen? still same?
same "Failed to initialize camera please reset the hardware" if i run in windows camera.exe
...
exact like me..i have this problem too and i upgrade to a new ROM version but still doesn't work..i don't know what to do
Dear all,
I want to reactivate the In Call Phone Slide Cover in my Artemis8 rom (WM6.5.x).
Up to know I tried HKLM\Software\HTC\Phone\EnableSliderCall=1, which does not help. I also got BSB where I activated the PhoneSlideCover.
I guess that it is not included by default in the cooked Rom and I could immagine that I would need to modify the registy at HKLM\Software\HTC\Phone\Cover\UntouchableRect....=.... to get it back.
It drives me crazy that almost every time I got a mail/alert during a call and the touchscreen gets on despite the proximity sensor, there will be an erroneous input.
Can anybody help me? The issue has been posted by other users in the past, but always abandonded without solution.
Kind regards
Arruffato
This thread has been created
for
Discussions/Questions & Answers/Troubleshooting
Make sure you use this thread in a good and effective way!
Please feel free to share issues, questions and offer help
1.How is call quality (Sound) and can i hear the other person voice clearly and without any disturbing sounds ??
2.Is it require data or wifi to save contacts to Google id and is there any option to save my contacts to phone or sim ??
3.Is back cover issue is still there or it has fixed fixed in the new stock ??
4.Any force close of apps have anyone faced ???
5.Is the Sim slot is loose? as i have seen in flipkart reviews that the Sim is automatically disconnected ? anyone facing this type of issues ??
6.Is the phone getting hot while using in normal usuage ??
7.How is 2g Internet usuage ??
Please can anyone answer my doubts about the phone as i wanted to buy the very urgently as my old mobile(Galaxy Y) LCD has broken and it costs around 2000 INR and I am about to go to Moto E..So please reply as fast as posiible as i dont want to see again out of stock in flipkart..
THANK YOU ....
Srinadh said:
1.How is call quality (Sound) and can i hear the other person voice clearly and without any disturbing sounds ??
2.Is it require data or wifi to save contacts to Google id and is there any option to save my contacts to phone or sim ??
3.Is back cover issue is still there or it has fixed fixed in the new stock ??
4.Any force close of apps have anyone faced ???
5.Is the Sim slot is loose? as i have seen in flipkart reviews that the Sim is automatically disconnected ? anyone facing this type of issues ??
6.Is the phone getting hot while using in normal usuage ??
7.How is 2g Internet usuage ??
Please can anyone answer my doubts about the phone as i wanted to buy the very urgently as my old mobile(Galaxy Y) LCD has broken and it costs around 2000 INR and I am about to go to Moto E..So please reply as fast as posiible as i dont want to see again out of stock in flipkart..
THANK YOU ....
Click to expand...
Click to collapse
1. Not too bad but no revelations. I hear some voices in background but its not too bad
2. Doesn't matter that you using mobile data or wifi - you can sync contacts with your google account and then export them to storage
3. I don't know. I took off back cover 3 times in my xt1021 and i feel it's loose all the time :/ but you need to read instruction how to remove back cover properly cause i did it wrong first time
4. 2 or 3 times Facebook app but not anymore
5. Never had any issue
6. I'm using my phone from one month never been hot. Just warm. It's getting warmer when charging but that's all (in my case)
7. Used 2 times for few minutes but it's too slow. not too bad but when you want to share something it taking too long for me
I'm still quite disappointed by the camera cause it's impossible to make good and sharp close picture (makro)
PLEASE NOTICE that im using XT1021 model (UK)
Greetings
Hey guys.
I am a bit worried now...just recieved my phone back from Huawei repair. It wasn't charging properly (took a long lime) - they changed the battery and the mainboard. Also the changed the rear cam - the optical element got loose and could not focus. The phone never fall down. Everything was guarantee repair.
But...i can send/recieve SMS and it normaly connects to 4G. But i can not make any calls. I can call from different phone normaly and also to be super sure i let my SIM card change by operator - same problem...so it is not about SIM card. Also no MMI codes do not work for me and i can not read the status of Caller ID in the menu.
Running latest OTA update GRA-L09C432B398
vendor hw, country eu
kernel c900b398
can you please help me? i do not want to put it back on guarantee for other month...it worked perfectly before i gave it for repair
Thanks a lot
Guys - the easiest way to get development started on a new device is to NOTIFY the device manufacturer that there is a NEED for the company to fix issues. The first issue is THE BOOTLOADER UNLOCK METHOD BREAKS THE FINGERPRINT SENSOR. This is obviously highly undesirable for anyone who wants ROOT. *** NOTE THIS CAN BE AVOIDED ENTIRELY THROUGH THE ROOT BYPASS METHOD (FP STILL WORKS), AND A USER HAS FOUND HOW TO RECALIBRATE THE FP SENSOR AFTER A BL UNLOCK, XDA POS: https://forum.xda-developers.com/nu.../guide-calibration-finger-print-loss-t4132961
The main issue is Google Pay does NOT WORK with NA and Global ROMs. It reports 2 cards instead of 1 card when you go to a terminal, so you can NEVER make a payment!!!
So how can we fix this issue? COMPLAIN!!! We got source this way already (THANK YOU FOR YOUR HELP GUYS WE DID IT!)
METHOD #1
EMAIL Nubia customer support (probably our best path) at [email protected]
You can simply report the issue similar to this message in your email:
Google Pay does not work with NFC which your Global and North American ROM claim to support. It reports 2 cards at the terminal instead of 1 card so payment fails EVERY time. This is an issue across the world for everyone with Google Pay. WE NEED THIS FIXED AS IT IS A LISTED FEATURE OF THE PHONE THAT DOES NOT WORK.
Please fix as soon as possible.
Signed,
[YOUR NAME / Country / Phone Model]
METHOD #2:
https://github.com/ztemt/NX659J_Q_kernel/issues/2
Post something like I did here - GOOGLE PAY DOES NOT WORK. FIX NFC ON GLOBAL AND NA VARIANT ROMS ASAP.
Please start posting comments here to release the source code so we can begin custom kernel and ROM development as soon as possible! Thank you everyone who contacted [email protected] or posted to the original GitHub issue, now we just need them to follow through!!! WE HAVE STRENGTH IN NUMBERS.
I have done as advised let's hope they fix this
Sent from my GM1913 using Tapatalk
I just did it too(both ways), but I don't know how much they care about the emails, I sent 3 before, for other things, without any reply
How much pay?
Guys! They do care about the device! I've emailed them three times, and I've got replies everytime!
ZTE released the source code for the Red Magic 5G... hopefully this will kick start development for this phone because it has so much potential.
nexuses said:
Guys! They do care about the device! I've emailed them three times, and I've got replies everytime!
Click to expand...
Click to collapse
Try asking about an older device that they dont produce/sell anymore. If they eager to answer they might care about devices that are older than 1 or 2 months
xabierd said:
Try asking about an older device that they dont produce/sell anymore. If they eager to answer they might care about devices that are older than 1 or 2 months
Click to expand...
Click to collapse
Well, the future updates are the only reason that hold me back from buying this phone! So I'll give it sometime to see what happens.. We will see..
Keep contacting guys..
Nevermind you closed the one with the new title ... Keeps this alive. Thanks Admins.... I don't see why closing this and opening another that resolves remaining ones is a problem. When I link it elsewhere it still looks like the original issue where we fixed or worked around 2 of them and now the last to address is GPay.
mslezak said:
Guys - the easiest way to get development started on a new device is to NOTIFY the device manufacturer that there is a NEED for the company to fix issues. The first issue is THE BOOTLOADER UNLOCK METHOD BREAKS THE FINGERPRINT SENSOR. This is obviously highly undesirable for anyone who wants ROOT. The second issue is Google Pay does NOT WORK with NA and Global ROMs. It reports 2 cards instead of 1 card when you go to a terminal, so you can NEVER make a payment!!!
So how can we fix this issue? COMPLAIN!!! We got source this way already (THANK YOU FOR YOUR HELP GUYS WE DID IT!)
METHOD #1
EMAIL Nubia customer support (probably our best path) at [email protected]
You can simply report the issue similar to this message in your email:
Google Pay does not work with NFC which your Global and North American ROM claim to support. It reports 2 cards at the terminal instead of 1 card so payment fails EVERY time. This is an issue across the world for everyone with Google Pay. WE NEED THIS FIXED AS IT IS A LISTED FEATURE OF THE PHONE THAT DOES NOT WORK.
Also, the bootloader unlock on the Redmagic 5G disables the fingerprint sensor completely - the error message says to contact Nubia support. The device will not even allow a fingerprint to be added. The Android installation detects the sensor on the "back of the phone" i.e. missing the Goodix in-screen fingerprint location, so it can not be added. Later trying to add an FP results in an error:
Loss of fingerprint calibration data
Loss of fingerprint calibration data was detected.
Currently unable to complete fingerprint entry,
please contact Nubia after-sales support via
4007006600
Please fix as soon as possible.
Signed,
[YOUR NAME / Country / Phone Model]
METHOD #2:
https://github.com/ztemt/NX659J_Q_kernel/issues/2
Post something like I did here - GOOGLE PAY DOES NOT WORK. FIX NFC ON GLOBAL AND NA VARIANT ROMS ASAP.
Please start posting comments here to release the source code so we can begin custom kernel and ROM development as soon as possible! Thank you everyone who contacted [email protected] or posted to the original GitHub issue, now we just need them to follow through!!! WE HAVE STRENGTH IN NUMBERS.
Click to expand...
Click to collapse
You can enter *#*#9959#*#* on the dial pad to enter fingerprint calibration mode, and then calibrate the fingerprint, it will return to normal
johnny886 said:
You can enter *#*#9959#*#* on the dial pad to enter fingerprint calibration mode, and then calibrate the fingerprint, it will return to normal
Click to expand...
Click to collapse
Sorry, it does not work here. I dialed the code but It doesn't do anything.
johnny886 said:
You can enter *#*#9959#*#* on the dial pad to enter fingerprint calibration mode, and then calibrate the fingerprint, it will return to normal
Click to expand...
Click to collapse
Johnny can you explain the calibration steps for everyone with this issue? We've seen the factory calibration device that no one can find for sale anywhere. But some have managed with using their finger, a piece of dark paper, and the back of a fingernail. But that doesn't seem to work for all.
mslezak said:
Johnny can you explain the calibration steps for everyone with this issue? We've seen the factory calibration device that no one can find for sale anywhere. But some have managed with using their finger, a piece of dark paper, and the back of a fingernail. But that doesn't seem to work for all.
Click to expand...
Click to collapse
You can use special fingerprint calibration weights to calibrate fingerprints. You can use weights to calibrate at some professional repair points.
johnny886 said:
You can use special fingerprint calibration weights to calibrate fingerprints. You can use weights to calibrate at some professional repair points.
Click to expand...
Click to collapse
That dial code doesn't work for some reason.
Anyways the code is *#9959# to start calibration off the TG group it works. Although what to do after launching it I have no idea.
I keep getting hung up here
viper98 said:
I keep getting hung up here
Click to expand...
Click to collapse
Same here...
My NFC Works now with Google pay only 1 out of 100 times ? it shows the message: present only one card at the terminal.