Database Users

destroyd l3 e400

hey!
i have a major problem with my e400
first i installed cyanogen 9
then i tried to install SDMergE400 but i couldn't proceed to step 2(status 7)
then i had to reinstall cyanogen 9 and now it doesn't recognize internal sd and external sd.
although it can see the external sd but can nto read it.
now i just formated everything through cwm based recovery,from sd to emmc(i don't know whatis this)
now all my smartphone does when i turn on is to show lg's logo and it seems that i can't access cwm based recovery.
i dont know what to do.please help,i broked my smartphone

Try to revert your phone to stock.. flash through kdz. I think it would work

how do i do this?
how do i do this?
my drivers can't recognize the divise

OK do this..
1st: Download kdz updater tool. Here
2nd: Download official Stock firmware. Here You can choose any of the following or if you already download one just use it.
3rd. Turn off your phone. Use this combination. Press Power button + vol up + vol down at the same time. You will be directed to EMERGENCY MODE. (This time your phone will be detected by kdz updater tool).
4th: Now use kdz updater tool. Use this settings, TYPE should be 3GQCT/Phone modeIAG. Now choose the kdz file that you have downloaded then press "Launch software update:.
Your done.

thanks
thaks but it can't recognize the device.
is sais phone was not found : /

Ntinoswtf said:
thaks but it can't recognize the device.
is sais phone was not found : /
Click to expand...
Click to collapse
i forgot to mention you must install LG united drivers first. And make sure you follow the step 3. When your phone boots it must be in emergency mode, your screen turns to yellow with a Emergency mode notice.

turvat1377 said:
i forgot to mention you must install LG united drivers first. And make sure you follow the step 3. When your phone boots it must be in emergency mode, your screen turns to yellow with a Emergency mode notice.
Click to expand...
Click to collapse
Sry but I think he should go 3GQCT/Phone modeI: EMERGENCY because DIAG is for when you don't want to delete anything and just update software.

Unbrick lg optimus l3 using kdz updater

To Anyone who gets problem to unbrick your LG Optimus L3 e400
It Really works for me.
How to instal LG Firmware using KDZ Updater
1. Download and Install USB driver for Lg L3 e400 from LG website or here
2.Download and install MSXML 4.0 SP3. here.
3.Download KDZ Updater here then extract it to your computer.
4. Download KDZ file according to your country or any compatible KDZ file. Download here
How to use KDZ:
1. Detach your external SD from your phone.
2. Remove your phone battery and wait for a few seconds.
3. Put your battery back to the phone.
4. Press volume - and + (or just in the middle of volume button) and power button at the same time.
5. wait till the phone screen turns to yellow (emergency mode) then release all the buttons.
6. Connect your phone to PC by using USB cable (your LG cable).
7. Stop or disable your antivirus or antimalware.
8. Run KDZ Updater as administrator.
9. Choose the following options in KDZ Updater:
Type: 3GQCT
Phone Mode: DIAG
and browse KDZ file is the one you downloaded, browse where you put this file and then select.
9. Click on “Launch Software Update”
10. If everything goes well, you will see “Finished” on KDZ Updater screen. Your phone will restart itself. You'll see the opening screen.
If something wrong happen it's usually because of the wrong download of KDZ file, broken KDZ Updater, or your antivirus.
I hope this could unbrik your LG L3 phone.
How to Root it.
After doing all the above now you can root your device again with this. Extract the file you just downloaded to your root of your computer.
Connect your device to the computer, then double click run.bat and wait till the device restart.
Now your device is rooted again
How to get CWM
Download from Google Play Rom Manager and download your CWM with this apk while online.
Good Luck

Hi, im a l5 user but the process, im new with this device, but if i flash a rom by kdz i'll need do root,install cwm, and unlock bootloader again?

AfonsoADR said:
Hi, im a l5 user but the process, im new with this device, but if i flash a rom by kdz i'll need do root,install cwm, and unlock bootloader again?
Click to expand...
Click to collapse
Yes, You do need to root and install cwm again.

afonsoadr said:
hi, im a l5 user but the process, im new with this device, but if i flash a rom by kdz i'll need do root,install cwm, and unlock bootloader again?
Click to expand...
Click to collapse
Yes. You do need to root and reinstall cwm because it's very safe.

I have 4.0.4 ICS (cm9) on my LG L3 (e400), I tried to flash to stock since official 4.4 (kitkat) is coming soon but it does nothing, just reboots normally after flashing (no errors reported with kdz flasher) with my wallpaper and everything, and it says that my battery is charging but it's not connected to charger or computer. Any ideas?

I did everything from the guide, step by step, and I'm stuck on this error: Upgrade Error: Wparam: 100 LParam :1010
I especially looked ower firmware, and I'm positive that I downloaded the right one.
I tried several times, and every time I get this error. Also, phone now boots to Emergency mode, and can't boot to something else.
Don't know what to do? Anyone help?

Just reinstall driver, reboot pc after instalation and run kdz as admin.
Sent from my LG-E400 using XDA Premium 4 mobile app

konjkonjkonj said:
I did everything from the guide, step by step, and I'm stuck on this error: Upgrade Error: Wparam: 100 LParam :1010
I especially looked ower firmware, and I'm positive that I downloaded the right one.
I tried several times, and every time I get this error. Also, phone now boots to Emergency mode, and can't boot to something else.
Don't know what to do? Anyone help?
Click to expand...
Click to collapse
You can only enter emergency mode because you haven't finished installing_KDZ. If I were you I would try download and install another KDZ file.
It will only work when you get the right KDZ file for your device. Don't worry to try another KDZ file.
Try another KDZ updater,
Unable antivirus and firewall.
Keep on trying. I hope these will unbricked your phone.
Sent from my LG-P705 using XDA Premium 4 mobile app

mr_techno said:
I have 4.0.4 ICS (cm9) on my LG L3 (e400), I tried to flash to stock since official 4.4 (kitkat) is coming soon but it does nothing, just reboots normally after flashing (no errors reported with kdz flasher) with my wallpaper and everything, and it says that my battery is charging but it's not connected to charger or computer. Any ideas?
Click to expand...
Click to collapse
Try hard reset
Sent from my LG p705 using XDA Dev Soft.

george brown said:
Try hard reset
Sent from my LG p705 using XDA Dev Soft.
Click to expand...
Click to collapse
I can't turn it off completely without removing the battery. When I place back the battery it turns on immediately, so I don't have time to hold button combo..... :/

Download Quick Boot Reboot from play store. Run it select recovery then it should hard reset your device.
Sent from my LG p705 using XDA Dev Soft.

mr_techno said:
I can't turn it off completely without removing the battery. When I place back the battery it turns on immediately, so I don't have time to hold button combo..... :/
Click to expand...
Click to collapse
After removing battery wait about 15 seconds and put it back. If it still fails, remove battery and wait for longer time.
Just keep on trying.
Sent from my LG-P705 using Tapatalk

Delete

help me
please help me... why after i press start upgrade at kdz updater. it says phone was not found even says it Finnish and nothing happen next? either i am connected to pc and already have needed drivers? please can you help me. i installed cyanoid14 standard and my phone goes boot loop like blinking white background infinitely

Have you tried entering into CWM?
If so, then you should do factory reset, wipe cache, and go to advance then wipe dalvik cache then restart your phone.
Sent using Tapatalk

george brown said:
After removing battery wait about 15 seconds and put it back. If it still fails, remove battery and wait for longer time.
Just keep on trying.
Sent from my LG-P705 using Tapatalk
Click to expand...
Click to collapse
Tried that, tried flashing another roms, tried KDZ, tried multiple stock roms....nothing works.... It says it's charging without cable being connected.

stuck with cm9
For those you stuck and cannot flash back to stock ROM. enter to CWM, and leave it there. Connect to PC and flash with EMERGENCY mode (not DIAG)

Works perfectly, tested in Windows 8
Thanks!

Unable to download kdz
Maybe I'm doing something wrong, but when I try click on the link for the kdz I'm looking for it takes me to a tny.cz page and nothing else happens.
What am I missing?

petriedave said:
Maybe I'm doing something wrong, but when I try click on the link for the kdz I'm looking for it takes me to a tny.cz page and nothing else happens.
What am I missing?
Click to expand...
Click to collapse
Nothing wrong with the links. I''ve checked them several times.

Bootloop [LS 980]

Hey guys I'm not sure if this is the right place to ask for help. I'm trying to boot into recovery and it's not working. I'm using a Lg G2 (Sprint). I was running Unofficial CM 10.2 and had a twrp recovery (2.6.3.3). I tried to flash PA 4.0-Alpha-201312050-ls980 with pa_gapps-modular-full-4.4.2-20131215. I'm not sure what went wrong and why I can't boot into recovery. Any information would be greatly appreciated, not sure if this is the right place to ask for help, thank you for your time. For some reason I can't find the thread now... God I'm an idiot. Any help would be greatly appreciated.

Try getting into download mode volume up and plug into computer
Or
Press and hold power and volume down until the LG logo, let go, then press and hold again for recovery

datechnerd said:
Try getting into download mode volume up and plug into computer
Or
Press and hold power and volume down until the LG logo, let go, then press and hold again for recovery
Click to expand...
Click to collapse
I couldn't get into recovery. I can get into download mode. It says Firmware Update Do not unplug. Stuck at 0%.
Please tell me I am not screwed... I have no idea what happened to my recovery. I figured if anything happened like this I could always boot into recovery and restore to stock. I'm honestly about to freak out...

AusernameIwillnotremember said:
I couldn't get into recovery. I can get into download mode. It says Firmware Update Do not unplug. Stuck at 0%.
Please tell me I am not screwed... I have no idea what happened to my recovery. I figured if anything happened like this I could always boot into recovery and restore to stock.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2432476

datechnerd said:
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Thank you so much... I'm such a noob scrub.

AusernameIwillnotremember said:
Thank you so much... I'm such a noob scrub.
Click to expand...
Click to collapse
You're welcome

datechnerd said:
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Hey I'm having a little trouble installing the drivers, it says there's a more up to date version already installed. I went to device manager and found my device, clicked properties and uninstalled the drivers. However when I try to install the ones in the guide you linked it still says they are there. Any clue how to remove them?

device manager, right click phone, update drivers, browse computer, let me pick from a list, unclick show compatible hardware, and find LGE or LG and pick the driver that makes sense

datechnerd said:
device manager, right click phone, update drivers, browse computer, let me pick from a list, unclick show compatible hardware, and find LGE or LG and pick the driver that makes sense
Click to expand...
Click to collapse
Ok I clicked "Let me pick a list of device drivers on my computer" .... uncheck show compatible. I do not see and LG or LGE in here though.
My options are
(Enhance Storage Device)
(Standard MTP Device)
(Standard MTP-Compliant Device)
(Standard MTP-compliant devices)
(WPD enhanced storage device)
Microsoft

AusernameIwillnotremember said:
Ok under device manager I see Portable Devices > MTP USB Device. Is this my phone? It's not letting my navigate or choose the driver in that guide...
Click to expand...
Click to collapse
unless you have any other devices plugged in, like mp3 player or another phone, that's probably your phone
right click the MTP USB Device and follow previously mentioned steps

datechnerd said:
unless you have any other devices plugged in, like mp3 player or another phone, that's probably your phone
right click the MTP USB Device and follow previously mentioned steps
Click to expand...
Click to collapse
Sorry that was a stupid question and I replied too fast and didn't fully follow your directions, I can't find any LG or LGE under the let me pick list. I have unchecked show compatible. I'll make sure to click that THanks button every time too, thank you so much for helping me out.

AusernameIwillnotremember said:
Sorry that was a stupid question and I replied too fast and didn't fully follow your directions, I can't find any LG or LGE under the let me pick list. I have unchecked show compatible. I'll make sure to click that THanks button every time too, thank you so much for helping me out.
Click to expand...
Click to collapse
http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425 try these drivers then those steps if it doesn't automatically

datechnerd said:
http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425 try these drivers then those steps if it doesn't automatically
Click to expand...
Click to collapse
Alright I downloaded those drivers and repeated the steps (device manager, update software, choose from list, uncheck compatible) and nothing with LG or LGE popped up. I decided to just try to install them anyway and it seems to work. I'll resume following the original guide you linked and assume that these drivers will work. I'll probably come back shortly with more questions but hopefully I'll get it this time.

datechnerd said:
http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425 try these drivers then those steps if it doesn't automatically
Click to expand...
Click to collapse
Ok I'm still having trouble, I installed the LG drivers you linked, installed LG FLash tools and didn't run (like it says in the guide), extracted TOT to desktop. I put the phone into download mode then it immediate goes into "Firmware Update" and it is stuck at 0%. In the guide it says it should initialize and load up drivers and I should see LG device under Device Manager. I do not see any device now. Maybe I need to use the old drivers in the guide?

AusernameIwillnotremember said:
Ok I'm still having trouble, I installed the LG drivers you linked, installed LG FLash tools and didn't run (like it says in the guide), extracted TOT to desktop. I put the phone into download mode then it immediate goes into "Firmware Update" and it is stuck at 0%. In the guide it says it should initialize and load up drivers and I should see LG device under Device Manager. I do not see any device now.
Click to expand...
Click to collapse
is it under ports and serial or something like that?

datechnerd said:
is it under ports and serial or something like that?
Click to expand...
Click to collapse
No. I unplugged it and plugged it back in and reinstalled the drivers you linked. I can now see it under devices as an LGE Android Phone. I booted into download mode and it's not initializing or installing drivers... I'm not sure what to do now.

datechnerd said:
is it under ports and serial or something like that?
Click to expand...
Click to collapse
I'll detail each step I've done
Install
1. Install the LG drivers downloaded above. Installed the drivers you gave me.
2. Install LGFlashTools v1.6 (but don't run it) Check
3. Extract the TOT file from the ZIP Check
Drivers initialization
1. Put the phone into download mode. (Turn off device PRESS VOL UP while plugging in the micro usb cable. If this doesn't work, try holding both volume keys instead) Check
2. Let the phone initialize and install the drivers. Once done, in Device manager, you should see the LG phone listed under COM ports (something along these lines). Doesn't initialize or install drivers! As I am typing this my device just disappeared from Device Manager, however, LGE AndroidNet USB Seriel Port (com4) has popped up
3. Find that LG entry in Device Manager, click on Properties, Advanced and then change the COM port to COM41 and close/save.
4. Unplu

AusernameIwillnotremember said:
No. I unplugged it and plugged it back in and reinstalled the drivers you linked. I can now see it under devices as an LGE Android Phone. I booted into download mode and it's not initializing or installing drivers... I'm not sure what to do now.
Click to expand...
Click to collapse
I'm quite stumped right, now. I'll keep looking

datechnerd said:
I'm quite stumped right, now. I'll keep looking
Click to expand...
Click to collapse
It's all good all of a sudden it appeared under ports! Now I'm trying to find an LG Flash tools serial number like it says in the guide but I cannot find one anywhere with a google search. However "free" lg flash tools appear on the top of the list. Not sure what to do here. I'll update where I'm at in the guide in a moment.

datechnerd said:
I'm quite stumped right, now. I'll keep looking
Click to expand...
Click to collapse
Ok here is where I am at.
4. Execute the LGFlashTools. It should ask you for a key, put it in. Now you should see a dialog where you can load the DLL file and the TOT files that you extracted earlier. Put them both in here. Click ok Check
Flashing
5. There is a yellow arrow on the top left. Click on it to initialize the process. Once done, it should say "ready/finished" or whatever. Clicked it and got this error "MilkyWay Control Port Open FAIL!!!."
6. Put the phone in download mode again, and plug it into the USB port. LG FLash Tools should start flashing it automatically. When it's done, it'll automatically reboot into your stock AT&T rom and all of your data and internal sdcard files are gone. Errors here too "Device Model is different!
Check Phone or DLL!
"

[Q] Help with Bricked LG G2

Hello Everyone,
I've been looking around and can't seem to find any guide I can get to work.
A couple months ago, I rooted my LG G2 and installed Cyanogen mod successfully. After a couple days, for some reason I restored to a backup I made back before I installed Cyan, so it was just on the Stock OS. A couple days later my phone tried to update itself and it bricked it. I was an idiot and wiped everything for some reason so theres nothing on there but the LG logo and then it goes to TWRP.
So now I'm not quite sure what to do. I can adb push and sideload just fine, but I've tried pushing a zip with the stock OS and installing it but everytime it just says it failed. Ive also pushed cyan on again and it says successfully installed and then just goes back to TWRP again. Can anyone help me with what to do from here? Do I need a certain tool to re install the OS? Will pushing it and then installing it with TWRP not work?
thanks!

Reflash lg g2 stock rom .
Sent from my GT-I9300 using XDA Free mobile app

How would I go about flashing the stock rom?

Ive been trying to use this guide
http://forum.xda-developers.com/showthread.php?t=2432476
But every time I try to use the "Automatic offline procedure" I get an error saying permission denied. I made sure the drivers and everything were installed
Any ideas?

Right click - Run as administrator.
Or do it manually
https, window enabler..etc.

Alright, so I was able to do it manually, but in the instructions it says to enable usb debugging. Just to clarify my phone is basically stuck in TWRP, so will this even work?

My comp doesnt even recognize my phone as an LG G2 it says something like ADB galaxy nexus.

cj0435 said:
My comp doesnt even recognize my phone as an LG G2 it says something like ADB galaxy nexus.
Click to expand...
Click to collapse
That's ok.
Open cmd line where your adb is. Put some rom inside.
Let's say the rom is : mycoolrom.zip
adb push mycoolrom.zip /sdcard/mycoolrom.zip
then flash it.

bender_007 said:
That's ok.
Open cmd line where your adb is. Put some rom inside.
Let's say the rom is : mycoolrom.zip
adb push mycoolrom.zip /sdcard/mycoolrom.zip
then flash it.
Click to expand...
Click to collapse
I did this, but like I said in the original post when I try to flash it, it just says failed every time. Ive tried files from all over and they all fail. Could you point me in the right direction of one that might work?
Thanks

You didn't mention download mode.
Try powering off the device, hold volume up and connect to pc ?
Is the download mode at least working ?

bender_007 said:
You didn't mention download mode.
Try powering off the device, hold volume up and connect to pc ?
Is the download mode at least working ?
Click to expand...
Click to collapse
Nope, no matter what I do it just goes to TWRP

And just to be clear it pushes over fine, and the zip is on the phone, its just when I try to flash it on TWRP it says failed. the last error code just said unable to open Zip

LG G2 D802 United Kingdom Open - unbrick?

Hey everyone,
I'm very new to Android development and XDA, but a few years ago I bricked this LG G2 and I don't really remember how, except that I rooted it and tried to install a custom ROM, which obviously didn't work.
I have tried a number of different guides on these forums, but somewhere or another I get stuck on them.
[HOW TO] Fix your soft-bricked LG G2 (All Variants)
I'll be very specific, something most people lack of. Okay lets get to it, I recently bricked my LG G2 (D801) by installing a ROM that wasn't compatible with my model. I fixed it by doing the following steps. This worked for me using Windows 8.1...
forum.xda-developers.com
With this one, although the device shows up in Devices and Printers, neither Fastboot nor the LG Flash Tool detect it. I have installed both the LG Mobile Driver and the LG United Mobile Driver.
“./fastboot devices” is empty.
I have the TOT file and the DLL that the (patched version of the) LG Flash Tool requires.
I have an Ubuntu 20.04 install as well as Windows 11. I can get into Firmware Update with a USB icon ("Do not unplug the USB connection until the process is complete. 0%." ...etc), when I turn it on normally it shows a battery made out of grey and white bars and a percentage, and sometimes the LG logo.
If you need to know anything else don't hesitate to ask \
Much appreciated,
ninjadev64

use a usb 2.0 port, update adb/fastboot, update drivers, remove previous related devices using nirsoft usbdeview. try using a windows 7 or earlier system. can you manually get into recovery? if so update to latest blastagator twrp which should be 3.3.1.

DvineLord said:
use a usb 2.0 port, update adb/fastboot, update drivers, remove previous related devices using nirsoft usbdeview. try using a windows 7 or earlier system. can you manually get into recovery? if so update to latest blastagator twrp which should be 3.3.1.
Click to expand...
Click to collapse
- I was using a 3.0 port, although it still showed up in Control Panel - I’ll try with a 2.0 port today
- I installed “Minimal ADB and Fastboot” and the drivers yesterday, so they should be up to date
- I’ll use usbdeview too
- I can’t use an older system unfortunately
- How do I get into recovery?

Recovery: With the device powered off and usb unplugged, hold Volume Down + Power. When the LG logo appears, release both buttons and hold Volume Up + Volume Down.

Ok, so I got into a factory reset screen that way, I said yes to factory reset, is that the right thing to do? (@DvineLord)

ADB recognises the device, but it's unauthorised. And I obviously can't boot it up to authorise it.
Factory reset just got me back to the LG screen for a long time, so I powered it off again.

Also, when I try to change the COM port to 41, when I click Advanced in Port Settings, it just stops me with "You must have write privileges in the registry for this device in order to modify the device's advanced settings".
I can't find the right path for the device in regedit to follow these steps: https://forums.techguy.org/threads/need-write-permission-for-com1-port.577543/#post-4756991

Were you able to get into Recovery? or did you get into Bootloader/Fastboot/Download?
Bootloader/Fastboot/Download: With the device powered off, hold Volume Up and connect the USB cable.
You want to be in Recovery like I posted above. Do you have TWRP on your device?

DvineLord said:
Were you able to get into Recovery? or did you get into Bootloader/Fastboot/Download?
Bootloader/Fastboot/Download: With the device powered off, hold Volume Up and connect the USB cable.
You want to be in Recovery like I posted above. Do you have TWRP on your device?
Click to expand...
Click to collapse
The recovery method you said to try got me into a factory reset screen, as I stated. All the other recovery methods I saw online didn’t work, so maybe I have no recovery?
I said in the original post that I can obtain download mode. I recognise “TWRP” but I’m pretty sure I botched it up while installing it, because I didn’t know how any of this worked, 4 years ago.
Thank you!

Unfortunate you can't get ADB/Fastboot working.

DvineLord said:
Unfortunate you can't get ADB/Fastboot working.
Click to expand...
Click to collapse
Soo... what can I do?

Try to recall as closely as possible the exact steps you used to modify your device. autorec, ioroot, stump root, avicohh, stock build you were on, custom rom you tried to flash, custom recovery, bootstacks, custom kernel, etc.
Odds are you'll have to try again to flash back to stock, something which I haven't done yet.

Unfortunately all I know is that I tried to install a custom ROM, scuffed up when I was installing twrp, the ROM didn't work and now I have no recovery to fix it. Flash back to stock *is* what I'm trying to do (that's your third question/point which I've already explained in the original post).
If anyone with the same problem visits this in the future, please save this post and share your solution if you find one, cause I'm still stuck!

hope you get it flashed back to stock. make sure to do the first 5 things i listed in my initial post to see if that helps you flash back to stock. the data cable can also make a difference sometimes too.