Hi Guys
Was running a custom N7 rom by Laypota decided in my wisdom that i would wipe before in updated to a new version of his rom unfortunatley i wiped more than i wanted to and now i am left with a phone that wont boot i cannot access recovery mode but can access download mode i went to samobile and downloaded a stock firmware for my phone went into odin and here is the error i am getting any help would be very appriciated thanks
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/005> Added!!
Related
I am trying to flash a firmware by following the guide here
http://forum.xda-developers.com/showpost.php?p=7152078&postcount=2
The message window in ODIN displays this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XWJV1_CL31216_REV03_user_mid_noship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVE.tar.md5 is valid.
<OSM> GT-I9000-MULTI-CSC-OXXJV1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XWJV1_CL31216_REV03_user_mid_noship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVE.tar.md5 is valid.
<OSM> GT-I9000-MULTI-CSC-OXXJV1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
it has been in this state for more than 20 minutes now. is this normal? if it isn't what should i do now?
Odin is pretty temperamental. Unplug the phone, take the battery out and try again...nothing has been changed just yet.
my phone SM N9005 was rooted I unrooted with app and tried to do factory reset
tried to flash cmw twrp nothing worked i was unable to enter recovery after first try of flashing it
i couldnt flash a rom till now
please help me
and now theres now system installed at th moment
was looking for a solution the whole night here
last try that shows up
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N900XXUCMK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N900XXUCMK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_N900SERCMK1_HOME_SER.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N900XXUCMK2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N900AUCUBMI9_1625098_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N900AUCUBMI9_1625098_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N900AUCUBMI9_1625098_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_N900AATTBMI9_1625098_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
thanks for help
Is reactivation lock off?
Did you know which os version you have before trying to flash this?
hey_joe said:
Is reactivation lock off?
Did you know which os version you have before trying to flash this?
Click to expand...
Click to collapse
Yes reactivation lock is off.
It was android 4.42 ota update before I rooted with auto root.
thanks for such a fast reply
KungfuSh said:
Yes reactivation lock is off.
It was android 4.42 ota update before I rooted with auto root.
thanks for such a fast reply
Click to expand...
Click to collapse
I checked the AP/PDA file you were trying to flash and it's apparently a 4.3 firmware which if you had a 4.4 before will not be possible to downgrade to a 4.3 firmware at the moment. So you have to flash a 4.4 firmware/roms.
KungfuSh said:
...
BL_N900AUCUBMI9_1625098_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
...
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
thanks for help
Click to expand...
Click to collapse
You only needed to show the above - you seem to be currently on the latest bootloader (from 4.4.2) and you are trying to write (at least parts of) an older bootloader sequence - that is not possible, at least not on N9005. Basically on N9005 once you went for the 4.4.2 bootloader you can only write a 4.4.2 ROM, read more around the sub-forums since there are hundreds of posts more or less similar to yours.
Also I find a little strange that you say you are on N9005 and you are trying to write stuff for N900A, and very strange that you are still surprised it does not work.
Hi,
I am trying to use this package, http://forum.xda-developers.com/showthread.php?t=2678124, to unbrick my samsung s4, SGH-I337M, with telus. Every time I run odin I get this output:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I337MVLUFNC1_880525_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337MVLUFNC1_880525_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I337MVLUFNC1_880525_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OYA_I337MOYAFNC1_880525_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
I tried running it three or four times and I get the same error. I have also tried other packages that I have found online and they all give me the same error as well.
My phone is currently soft-bricked, every time I turn it on it takes me to a screen that says:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
I tried to recover it using Kies, but it doesn't recognize the device, however Odin does recognize the device.
I have tried on multiple usb ports, and different computers, all with the same error.
Any suggestions on what to do next would be greatly appreciated.
Hello i try install oreo on galaxy with comsy odin and installation stops on <ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin.lz4
whats wrong ???? Thanks for help
it does not matter. i fix thiat
Hi i was trying to flash a new rom to my s7 edge so i downloaded what i thought was a good rom to use. However, when i did the flashing using Odin, it now boots directly to recovery, and when i click on the reboot system, it goes to a screen that says SBL ERROR UPLOAD MODE and that pretty much stays there. I am so confused and frustrated now because i just don't know what else to do. I can boot to the download mode, however, all the models i have tried(s7 edge sm-935v) do not get past the FAIL! SHA256 is invalid error. PLEASEE any help would be highly appreciable.
this is the log i get in odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 5305 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)