I found a BTV-W09C128B003 firmware update on Huawei's site using the firmware finder. My tablet has been rooted and it does not find this version when checking for software updates. I was wondering if anyone has updated their US version of the tablet to this version either through OTA or a manual update and if so, what issues it addressed.
I have a US model BTV-W09 and a build number of BTV-W09C128B002 every time I check for updates using the built in updater it says there aren't any. I am not rooted or unlocked.
Sent from my Pixel XL using Tapatalk
I've tried the manual update and it just doesn't take it for some reason. I've tried to install it the DLoad method and it says it installs it but the version stays the same(002).
Sent from my BTV-W09 using Tapatalk
I tried the DLoad method, and I am still on 002 as well, but my root was wiped out and I seem to have the factory recovery now instead of TWRP. I did run the factory recovery and now the dpi change is sticking after rebooting like it used to before I messed with the scaling after unlocking the bootloader. I will most likely re-root the tablet tomorrow.
Same experience. I got BTV-W09C100B005, firmware finder found B006, flashed but still B005 showed. Not sure the kernel build date changed or not (says 4th Jan)
johje said:
I found a BTV-W09C128B003 firmware update on Huawei's site using the firmware finder. My tablet has been rooted and it does not find this version when checking for software updates. I was wondering if anyone has updated their US version of the tablet to this version either through OTA or a manual update and if so, what issues it addressed.
Click to expand...
Click to collapse
Mine updated via OTA today. I'm not rooted, totally stock. No issues so far.
I have TWRP installed. When I tried doing the OTA (B003) today, it rebooted to TWRP, started installing update.zip, then errored out. Not that I was expecting it to work, but FYI...
What's the DLoad method?
neo_1221 said:
I have TWRP installed. When I tried doing the OTA (B003) today, it rebooted to TWRP, started installing update.zip, then errored out. Not that I was expecting it to work, but FYI...
What's the DLoad method?
Click to expand...
Click to collapse
Method to update huawei devices. One would insert the update.app file in a dload folder on the root of either the internal or external sdcard and press volume up, vol down and power to enter update mode.
Sent from my BTV-W09 using Tapatalk
I have tried multiple times with firmware finder and it downloads unpacks and goes through the update process, but it stays on B002 instead of moving to B003 and it keeps the September security patch. Oh well.
Sent from my BTV-W09 using Tapatalk
drooblz said:
When do you do that key combination? Tried it at boot up and it just went into TWRP/recovery mode.
Click to expand...
Click to collapse
did you try that key combination when the device was powered off? I think You need to flash the stock recovery for it to go into that mode....
Sent from my BTV-W09 using Tapatalk
I just (finally) received notification of the pdate
Got the OTA update on both of my Mediapads this morning. The update seems to have solved issues with the touch screen response and scrolling Facebook seems smoother.
Sent from my BTV-W09 using xda premium
I just checked through the stock updater and received the update also. Who thinks this is the last update we get?
Sent from my Pixel XL using Tapatalk
ahent said:
I just checked through the stock updater and received the update also. Who thinks this is the last update we get?
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
I am still hoping for an update to EMUI 5 and Nougat. Fingers crossed.
Sent from my BTV-W09 using xda premium
^^
+100! Seriously. I don't find 4.1 bad at all with Nova Launcher -- I actually really *love* this tablet, but multi-window from Nougat would be nice!
mickliq said:
^^
+100! Seriously. I don't find 4.1 bad at all with Nova Launcher -- I actually really *love* this tablet, but multi-window from Nougat would be nice!
Click to expand...
Click to collapse
I also use Nova Launcher and I am very satisfied. Past experience has shown that upgrades to Android are not always for the better… performance wise. The Lollipop upgrade crippled the Nexus 7.
Sent from my BTV-W09 using xda premium
Nougat should be coming soon, from what I've read on the chinese beta pages there's an estimate date of it being released somewhere in april I think. The Closed Beta started in the middle January. The current 4.1 is fairly stable, so when Nougat gets released I'm pretty sure the same will come!
Has anybody with an unlocked bootloader and root been able to successfully update? If so, what method did you use?
I have tried both options and the update but it keeps failing. Is there a way i can get the ota recovery back on there? I haven't been able to find it on here to download and install. Right now I have twrp and am rooted.
mine already updated to B003 through OTA about 3 weeks ago, the touch screen issue is basically fixed. Before that, i tried to install the update pack by myself but none of the trial succeeded.
Related
Purpose of this thread:
This thread is about changes within factory images of newly released Android updates in comparison with the previously released Android update.
Latest Android version 8.1.0 (Oreo): OPM7.181205.001
This December update is most likely gonna be the last official security update from Google for the Nexus 5X (source: https://support.google.com/nexus/answer/4457705?hl=en)
Download-Link: https://dl.google.com/dl/android/aosp/bullhead-opm7.181205.001-factory-5f189d84.zip MD5: 05DEE954B6FD17B6B301A4D1C90B1B5EChangelog: https://source.android.com/security/bulletin/pixel/2018-12-01 Unchanged:
bootloader bhz32c
radio 2.6.42.5.03
Changed: (md5sum in brackets)
boot (438936FDD50D2C8D3FA8D7586624D670)
recovery (E55D287CBCF78DACEC618E538CE74014)
system (9DD438116FB86EDBF89876A728CC0AA8)
vendor (97C79E83F00AD006D77DA9C570A71BD7)
How to install it on rooted devices with custom recovery installed? Flashfire?
Δημοσιεύτηκε από Google Nexus 5X με Android 7.0 Nougat μέσω Tapatalk.
AFK269 said:
How to install it on rooted devices with custom recovery installed? Flashfire?
Δημοσιεύτηκε από Google Nexus 5X με Android 7.0 Nougat μέσω Tapatalk.
Click to expand...
Click to collapse
That has worked before. Still should work, I have not tried it though.
Sent from my Nexus 5X using Tapatalk
---------- Post added at 02:40 AM ---------- Previous post was at 02:39 AM ----------
Any idea what changes to the system?
Sent from my Nexus 5X using Tapatalk
Smoosh1 said:
userdata.img is the same (MD5: 808444c5b0a4cbfa1f2cbf38b6629b67)
cache.img is the same (MD5: 9aedd15ebf6bc07a38de5bcd705f516a)
Click to expand...
Click to collapse
I think you'll find userdata and cache won't change throughout the lifecycle of nougat. Through something like 14 MM updates they never changed (same MD5) until Nougat came (where they did change) and then through 2 releases they haven't changed.
AFK269 said:
How to install it on rooted devices with custom recovery installed? Flashfire?
Click to expand...
Click to collapse
I would recommend you follow Heisenberg's guide, section 9 "How To Update To A New Build Of The Stock ROM"
sfhub said:
I think you'll find userdata and cache won't change throughout the lifecycle of nougat. Through something like 14 MM updates they never changed (same MD5) until Nougat came (where they did change) and then through 2 releases they haven't changed.
Click to expand...
Click to collapse
You are right, they most likely won't change throughout the lifecycle of nougat. I just mentioned them for the sake of completeness.
Comparison of Android Updates
Do It A Your Own Risk. I am not responsible if you make a mistake.
I found this method on the Internet and I applied it to my phone right now:
(WITH THIS METHOD YOU WILL NOT LOSE ROOT, CUSTOM RECOVERY)
1.Download the ZIP.
2.Download FlashFire.
3.Open flashfire and accept for root access etc etc...
4.click "+" button and click to "flash firmware package" and find the ZIP.
5.Wait for a couple o seconds or 2mins, and then uncheck the "Recovery" (if you don't want to lose the custom recovery) and "Data" (maybe on your device will be already unchecked so keep it unchecked if you don't want to lose your data) and then I clicked the "ν" button.
6.Click "Flash". Your screen will be black for a minute and then you will see a progress bar at the bottom of your screen and log of FlashFire what installs on your device.
7.When it finish flashing, your device will be automatically reboot.
8.Wait a couple of minutes (approximately 3-6 mins).
9.Your device is running the latest Android Version with the latest Security patches and you have also root back....
Sent from my iPad using Tapatalk
AFK269 said:
I found this method on the Internet and I applied it to my phone right now
Click to expand...
Click to collapse
Strange that you didn't include a reference to where you got it on the Internet. Many times, they provide more detail than just the steps and took time create the content and test the procedure.
krelvinaz said:
Strange that you didn't include a reference to where you got it on the Internet. Many times, they provide more detail than just the steps and took time create the content and test the procedure.
Click to expand...
Click to collapse
http://nexus5.wonderhowto.com/how-t...thout-losing-root-no-computer-needed-0168428/
Sent from my iPad using Tapatalk
AFK69 shared the typical img flashing instructions for FlashFire. I've been using it on my rooted devices for months. No issues.
Sent from my Nexus 9 using Tapatalk
Android November update NRD91N released
New Android security update NRD91N got released today.
What has changed? -> See updated OP
I'm sorry, but HERE the last one is still NPF10C, it's a different branch or I'm missing something?
EDIT: nevermind i'm dumb, the post is about the official factory image, mine is about devoloepr preview
AFK269 said:
http://nexus5.wonderhowto.com/how-t...thout-losing-root-no-computer-needed-0168428/
Click to expand...
Click to collapse
Only problem with FlashFire is CF himself says not to flash a bootloader or radios so when there a change there you either have to make a twrp flashable or use fastboot to get atw updated.. Has anyone used FF to flash bootloader? I'm curious....
Sent from my Nexus 5X using XDA Labs
SM210 said:
Only problem with FlashFire is CF himself says not to flash a bootloader or radios so when there a change there you either have to make a twrp flashable or use fastboot to get atw updated.. Has anyone used FF to flash bootloader? I'm curious....
Click to expand...
Click to collapse
Me too!! (Curious)
Sent from my Nexus 5X using XDA Labs
My build number changed to N5D91L after the November update, not NRD91N. How come?
In the past there were some different builds for different countries with a different radio.img. So where do you come from?
I live in the UK.
Edit: And my radio is still 2.6.33.2.14.
Hm...I've only found a lot of japanese sites (f.e. Y!Mobile (is that yahoo?) if I search for this build. Don't know if there is a coherence.
N5D91L is 7.0.0_r21 while NRD91N is 7.0.0_r15. Probably a quick hotfix on the unfixed dirtycow exploit + other fixes . Too lazy to check the real changes on git.
Since some of us is still waiting for the ota by phases and by the time we are getting it, google already roll out N5D91L. Thus the mysterious build update emerged. The others on NRD91N will get it or probably not, until December.
ThorSchwar said:
Hm...I've only found a lot of japanese sites (f.e. Y!Mobile (is that yahoo?) if I search for this build. Don't know if there is a coherence.
Click to expand...
Click to collapse
Nevermind, apparently it's a regular build - see: http://forum.xda-developers.com/nexus-5x/help/n5d91l-strange-android-build-t3500378
November OTA patch has new tag:
Just captured this from my 5X.
Source: google/bullhead/bullhead:7.0/NBD90W/3239497:user/release-keys
Target: google/bullhead/bullhead:7.0/N5D91L/3425233:user/release-keys
https://android.googleapis.com/packa...a1f18978ec.zip
So looks like the new build is not NRD91N but N5D91L.
Installed Nougat tonight. Said install failed but it installed and seems to be working fine.
Everything you need right here:
https://www.getdroidtips.com/huawei-mediapad-m3-b302-nougat-firmware/
Also, all of my apps and setting stayed intact.
seems you jumped the gun. there's what looks to be an official nougat update within firmware finder (play store app) for nougat now. there's 2 versions, full OTA (2.49GB) and OTA (656MB). version is BTV-W09C128B350
Blue Tooth not turning on...
ExTREmE99 said:
seems you jumped the gun. there's what looks to be an official nougat update within firmware finder (play store app) for nougat now. there's 2 versions, full OTA (2.49GB) and OTA (656MB). version is BTV-W09C128B350
Click to expand...
Click to collapse
I saw that. Used the function to check compatibility and said no so I moved on.
I tried to install with firmware finder proxy and it went through it all then said failed and left me with old version. Glad it didn't work out so at least I have Bluetooth. Hopefully this means we are getting closer to an official version for the US.
Sent from my Pixel XL using Tapatalk
I have other issues too. Please ignore until fixed.
ahent said:
I tried to install with firmware finder proxy and it went through it all then said failed and left me with old version. Glad it didn't work out so at least I have Bluetooth. Hopefully this means we are getting closer to an official version for the US.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
mph300 said:
I have other issues too. Please ignore until fixed.
Click to expand...
Click to collapse
the US nougat version works great! no bugs that i can tell, except it failing one of the safetynet checks, which is about right for a beta
Hi,
i've upgraded my Huawei Nova (european version, vodafone branded) to android 7.0 via official OTA update. Soon i realized that this version was bugged, so i decided to do a factory data reset, but after the phone rebooted an error like "impossible reset" came out and i could only press on "reboot system now". It looped on logo for a while and then the welcome page appared (like it was successfully restored).
After all the process of the first configuration, i got my device working but i realized that again something was wrong. The phone signal indicator keeps telling me i'm connected via 3G or 4G even if i switch off mobile data, themes app doesn't work and under Build number i have NRD90M test-keys; plus the updater app wont open.
I've tried some guide on this forum, specially the one that say to apply the patch "update_data_full_CAN-L01_hw_eu", but all the pakage i've tried gave me the same error "Software install failed" at 5% of the process of installation.
I don't reallt know what to do now to get the phone works properly. If anyone can help i'll really appreciate.
Wellcome to nova android 7 era and same as many other person like me there is no certain fix for these problem??
Sent from my HUAWEI CAN-L11 using Tapatalk
xeno.hawker said:
Wellcome to nova android 7 era and same as many other person like me there is no certain fix for these problem
Sent from my HUAWEI CAN-L11 using Tapatalk
Click to expand...
Click to collapse
So i'm not the only one facing this problem ? Has anyone tried to get it repaired with warranty?
Slv3r said:
So i'm not the only one facing this problem ? Has anyone tried to get it repaired with warranty?
Click to expand...
Click to collapse
I try many methods and there is no hope.but maybe just maybe you can send your phone to local store to reflash it then try update again
Sent from my HUAWEI CAN-L11 using Tapatalk
I've resolved the "NRD90M test-keys" problem manually flashing an update for my Nova (CAN-L01C02) with the version B340 that i found with FirmwareFinder without rooting or unlocking the bootloader. I put the links if someone is interested.
First flash the big one http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1371/g79/v86683/f1/full/update.zip (at this point the "NRD90M test-keys" problem still here)
Then the small update http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1371/g79/v86683/f1/full/CAN-L01_vodafone_default/update_data_full_CAN-L01_vodafone_default.zip that will fix the "NRD90M test-keys" problem and all the other problems (theme app not working ecc.)
Now the phone works fine, except for the update app that still won't open, but it is not a big problem because you can still flash updates manually. :good:
Welcome to the Pupped up club ...
You said that youve updated via OTA ?...the ''normal usual way'' tu update / upgrade ?
you did not use firmware finder... is that it ?
im asking cuz,via the ''normal / official OTA way,few of us are having problems BUT...
if your upgrade comes from firmware finder (or else), you can be 98% shure to have problems (like theme manager)
My wife and i have the same Nova Plus MLA-L03...
i did the upgrade via firmware finder on my device and, not happy at all
My wife did hers via OTA normal/carrier way and her phone just work perfectly...
and if you ask IF theres a way back to MM, well forget it... we just CANT rollback to Marshmallow/emui4.1:crying::crying:
virusdunil said:
Welcome to the Pupped up club ...
You said that youve updated via OTA ?...the ''normal usual way'' tu update / upgrade ?
you did not use firmware finder... is that it ?
im asking cuz,via the ''normal / official OTA way,few of us are having problems BUT...
if your upgrade comes from firmware finder (or else), you can be 98% shure to have problems (like theme manager)
My wife and i have the same Nova Plus MLA-L03...
i did the upgrade via firmware finder on my device and, not happy at all
My wife did hers via OTA normal/carrier way and her phone just work perfectly...
and if you ask IF theres a way back to MM, well forget it... we just CANT rollback to Marshmallow/emui4.1:crying::crying:
Click to expand...
Click to collapse
Yes, at first i've updated via official OTA (the ''normal usual way'' to update) and i got all the problems described in the first post; then to resolve i've downloaded the firmware with firmware finder and flashed with the 3 buttons metod, and almost all is fixed now.
Slv3r said:
Yes, at first i've updated via official OTA (the ''normal usual way'' to update) and i got all the problems described in the first post; then to resolve i've downloaded the firmware with firmware finder and flashed with the 3 buttons metod, and almost all is fixed now.
Click to expand...
Click to collapse
I try this method many times but there is no chance
Sent from my HUAWEI CAN-L11 using Tapatalk
xeno.hawker said:
I try this method many times but there is no chance
Sent from my HUAWEI CAN-L11 using Tapatalk
Click to expand...
Click to collapse
if it's not working is because you're flashing the wrong version of the update file, be sure to use the correct version (CAN-L01Cxxx) where xxx is the version you've installed in you device, then with "firmwarefinder" search the correct update file and flash it. This method have to work.
Slv3r said:
if it's not working is because you're flashing the wrong version of the update file, be sure to use the correct version (CAN-L01Cxxx) where xxx is the version you've installed in you device, then with "firmwarefinder" search the correct update file and flash it. This method have to work.
Click to expand...
Click to collapse
Yes.problem start when first time i look at my phone it's Can-L11c185 but none of updates work then i try c432 updates and it's work but now theme and update problems can't fix and try c185 updates and there is no chance to update
Sent from my HUAWEI CAN-L11 using Tapatalk
xeno.hawker said:
Yes.problem start when first time i look at my phone it's Can-L11c185 but none of updates work then i try c432 updates and it's work but now theme and update problems can't fix and try c185 updates and there is no chance to update
Sent from my HUAWEI CAN-L11 using Tapatalk
Click to expand...
Click to collapse
if now you're on C432 try to install this http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1371/g79/v85874/f1/full/CAN-L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip always with the 3 button method. Extract the archive in "dload" folder on the root of your External microSD.
Slv3r said:
if now you're on C432 try to install this http://update.hicloud.com:8180/TDS/...-L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip always with the 3 button method. Extract the archive in "dload" folder on the root of your External microSD.
Click to expand...
Click to collapse
I did it but nothing change.is it necessary to factory reset and flash 2 files again?
Sent from my HUAWEI CAN-L11 using Tapatalk
xeno.hawker said:
I did it but nothing change.is it necessary to factory reset and flash 2 files again?
Sent from my HUAWEI CAN-L11 using Tapatalk
Click to expand...
Click to collapse
The flashing process completed without any error? I've resolved without factory reset.
Slv3r said:
The flashing process completed without any error? I've resolved without factory reset.
Click to expand...
Click to collapse
Update is working without errors and phone reset normally but still no fix.maybe problem happen first time that i flashed 432v update on 185v phone??
Sent from my HUAWEI CAN-L11 using Tapatalk
Ive tried a lot of things to have broken apps working again...even tried to install apps separately and always ended with... Corrupted files or bad app signature
xeno.hawker said:
Update is working without errors and phone reset normally but still no fix.maybe problem happen first time that i flashed 432v update on 185v phone?
Sent from my HUAWEI CAN-L11 using Tapatalk
Click to expand...
Click to collapse
From what i know, that number version only change which system apps you have installed by default (of brand ecc.) so i can't find a reason for that be a problem. Insted you have the dual sim version right? Maybe is because you have flashed the single sim version?
Hello guys i make update on my huawei Can L01 C109B100 to emui 5.0.1 anfroid 7 C109B331 and now i have build number NRD90M test-keys everything work perfect except factory reset,themes and update app.I try with Hi suite but not work because not want to connect after did settings corect on option development with usb debug on and oem on.Please give me solutions for fix that,wait your advice,thanks in advance.... i flash with huawei finder wrong firmware and now i need flash the verison good of my firmware but i don't know wich are this firmware,please help me,thanks a lot.I forget tell you that in option development OEM ENABLE BUTTON is invisible and i can't enable....
iceman1177 said:
Hello guys i make update on my huawei Can L01 C109B100 to emui 5.0.1 anfroid 7 C109B331 and now i have build number NRD90M test-keys everything work perfect except factory reset,themes and update app.I try with Hi suite but not work because not want to connect after did settings corect on option development with usb debug on and oem on.Please give me solutions for fix that,wait your advice,thanks in advance.... i flash with huawei finder wrong firmware and now i need flash the verison good of my firmware but i don't know wich are this firmware,please help me,thanks a lot.I forget tell you that in option development OEM ENABLE BUTTON is invisible and i can't enable....
Click to expand...
Click to collapse
Try to flash this full firmware i've found with FirmwareFinder main update then flash the second part that should fix the NRD90M problem second part; for each update.zip, unzip and copy in DLOAD folder on root of your external microsd card, then reboot and press volume up + volume down + power button util huawei logo apper; then the update should start.
Help mе too
Hey. I have a similar problem. I have MLA-L12c636b130 updated to emui 5.0.1 anfroid 7 C636B300CUSTC636D003 and now i have build number NRD90M test-keys. Help pozhalusta restore normal work of the apparatus. I would like to roll back on 6, will there be a solution? And will there be a "rollback" for us ..?
Very strange. I'm on DP4. About 10 minutes ago I checked for an OTA to the new official 8.0 build and hey presto, up came the Android Oreo update available message. When I hit download and install, I got an error message and now the update is no longer available. Just says I have the latest version. Anyone else experience this?
I joined the beta program today. My version is 8.0.0. Is that beta or final?
Sent from my Pixel XL using Tapatalk
SpaceGooner said:
Very strange. I'm on DP4. About 10 minutes ago I checked for an OTA to the new official 8.0 build and hey presto, up came the Android Oreo update available message. When I hit download and install, I got an error message and now the update is no longer available. Just says I have the latest version. Anyone else experience this?
Click to expand...
Click to collapse
I'm having the exact same issue and Google's help don't know ****. She keeps telling me it's not even available even though I can clearly see the update smh
Sent from my Pixel XL using XDA Free mobile app
Mine is stuck like this, lol. I have a great WiFi signal and everything. Not sure what's up.
I have this and amazing Internet speeds.
Exact same issue here
Wonder if it's those that are on DP that are effected, anyone confirm they flashed OTA successfully via DP or N?
It has been removed and is supposed to be online again, that says Google. Waiting and relaxing
I'm now on the latest version according to the updates section. Meh, I'll factory install it in the morning.
According to other threads, they had problems with signature of the update packages being incorrect. They stopped otas, and are dropping them again, I believe.
Just a second ago the OTA was available again. Tried to download it and got the same error message as the first time around. Once again it has been replaced by your system is up to date. Some crazy weirdness definitely going on here. I think I'll try again tomorrow.
noidea24 said:
According to other threads, they had problems with signature of the update packages being incorrect. They stopped otas, and are dropping them again, I believe.
Click to expand...
Click to collapse
Ah, that would explain things.
I started a help session, and they said I needed to be unrooted for the OTA to be able to do anything. I'm going to try unrooting, but tbh I'll probably just end up flashing from the factory image.
SonarMonkey said:
I started a help session, and they said I needed to be unrooted for the OTA to be able to do anything. I'm going to try unrooting, but tbh I'll probably just end up flashing from the factory image.
Click to expand...
Click to collapse
That would be pretty obvious, you can't get system updates if you're rooted on literally any device.
richfreestone said:
That would be pretty obvious, you can't get system updates if you're rooted on literally any device.
Click to expand...
Click to collapse
I knew it wouldn't install, but it usually downloads it so that I can use Flashfire. This time around it seems that it won't even do that.
I have got 2 OTA URLs for build OPR6.170623.011/8.0.0 from my Australian Telstra carrier Pixel XL registered in Beta Program.
One is incremental from DP4, the other I'm not sure but is 951MB.
Will post them up here and update with the exact contents shortly...
64MB:
https://ota.googlezip.net/packages/.../75739c219338945fd6460465b0ec6346c56235ca.zip
Code:
ota-required-cache=0
ota-streaming-property-files=payload.bin:2654:68615126,payload_properties.txt:68617832:154,care_map.txt:569:156,compatibility.zip:772:1841,metadata:63:464
ota-type=AB
post-build=google/marlin/marlin:8.0.0/OPR6.170623.011/4283328:user/release-keys
post-build-incremental=4283328
post-timestamp=1502993522
pre-build=google/marlin/marlin:8.0.0/OPP4.170623.014/4187591:user/release-keys
pre-build-incremental=4187591
pre-device=marlin
951MB for OPR6.170623.012 (it disappeared before i could accept the OTA) (update - is now trying to push this OTA to my Telstra carrier Pixel XL which seems to be incorrect as I should be on the .011 build not .012):
https://android.googleapis.com/pack.../8cfe91d60eafcec2c74e3eef4c2506473b2d7187.zip
Code:
ota-required-cache=0
ota-streaming-property-files=payload.bin:2549:996875675,payload_properties.txt:996878276:154,care_map.txt:464:156,compatibility.zip:667:1841,metadata:63:359
ota-type=AB
post-build=google/marlin/marlin:8.0.0/OPR6.170623.012/4283428:user/release-keys
post-build-incremental=4283428
post-timestamp=1502994895
pre-device=marlin
From another post on XDA for OPR6.170623.012:
https://android.googleapis.com/pack.../80cafb69c50be0fb6ed197998bd7434b26155355.zip
Code:
ota-required-cache=0
ota-streaming-property-files=payload.bin:2654:52977084,payload_properties.txt:52979790:154,care_map.txt:569:156,compatibility.zip:772:1841,metadata:63:464
ota-type=AB
post-build=google/marlin/marlin:8.0.0/OPR6.170623.012/4283428:user/release-keys
post-build-incremental=4283428
post-timestamp=1502994895
pre-build=google/marlin/marlin:8.0.0/OPP4.170623.014/4187591:user/release-keys
pre-build-incremental=4187591
pre-device=marlin
In the US and just enrolled in Beta, got the update, unenrolled in Beta and all is good.
dhaugru said:
In the US and just enrolled in Beta, got the update, unenrolled in Beta and all is good.
Click to expand...
Click to collapse
I tried that, still no OTA update, it's been about 2 hours.
Sent from my Pixel XL using Tapatalk
imnuts said:
I tried that, still no OTA update, it's been about 2 hours.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
No update for me either.
Sent from my Pixel XL using Tapatalk
imnuts said:
I tried that, still no OTA update, it's been about 2 hours.
Click to expand...
Click to collapse
millerd79 said:
No update for me either.
Click to expand...
Click to collapse
And it's coming down now, almost 3-4 hours after signing up for the beta.
Sent from my Pixel XL using Tapatalk
Looks to be a minor update, but at least they're still thinking about us
States EMUI version 5.0.1
Android version 7.0
Android security patch level August 5, 2017
So far, the main change I have noticed is the addition of a "Moving Picture" mode to the camera app, which is similar to the Live Photos you would find on iOS.
Also, it seems they have added an automatic video creation "Highlights" feature to the Gallery app, utilizing Quik video editor. Not sure if this was already included in previous versions.
peterchen1999 said:
Looks to be a minor update, but at least they're still thinking about us
States EMUI version 5.0.1
Android version 7.0
Android security patch level August 5, 2017
So far, the main change I have noticed is the addition of a "Moving Picture" mode to the camera app, which is similar to the Live Photos you would find on iOS.
Click to expand...
Click to collapse
Gr8 and battery life?
I guess they mentioned it in updates?
@PalakMi
We don't have to rebrand!!!
Sent from my Honor 8 using XDA Labs
---------- Post added at 05:14 PM ---------- Previous post was at 04:29 PM ----------
peterchen1999 said:
Looks to be a minor update, but at least they're still thinking about us
States EMUI version 5.0.1
Android version 7.0
Android security patch level August 5, 2017
So far, the main change I have noticed is the addition of a "Moving Picture" mode to the camera app, which is similar to the Live Photos you would find on iOS.
Click to expand...
Click to collapse
Can u share a screenshot of ur about page after the update please?
Sent from my Honor 8 using XDA Labs
ayush rao said:
@PalakMi
We don't have to rebrand!!!
Sent from my Honor 8 using XDA Labs
---------- Post added at 05:14 PM ---------- Previous post was at 04:29 PM ----------
Can u share a screenshot of ur about page after the update please?
Click to expand...
Click to collapse
Here you go.
peterchen1999 said:
Here you go.
Click to expand...
Click to collapse
Awesome. I can't wait for the update to reach my device!!!!
Sent from my Honor 8 using XDA Labs
I'm rooted and have TWRP installed. I tried updating and it said "zip failed to install" a few different times. I am curious on what I need to do to update, not necessarily just for this update but for future ones as well. Thanks
cant wait!!!
myphoneishaunted said:
I'm rooted and have TWRP installed. I tried updating and it said "zip failed to install" a few different times. I am curious on what I need to do to update, not necessarily just for this update but for future ones as well. Thanks
Click to expand...
Click to collapse
You need to be on stock and unrooted for the official update process to work.
myphoneishaunted said:
I'm rooted and have TWRP installed. I tried updating and it said "zip failed to install" a few different times. I am curious on what I need to do to update, not necessarily just for this update but for future ones as well. Thanks
Click to expand...
Click to collapse
unroot then do update
PS: My L04 still not get this update
blackbuffalo said:
unroot then do update
PS: My L04 still not get this update
Click to expand...
Click to collapse
Mine too. Might take another 1-2 weeks probably for every device to receive the OTA.
Sent from my Honor 8 using XDA Labs
Anyone with the 64gb version (L14) confirm the update as well? I haven't gotten it with my L14 yet.
mcvanger said:
Anyone with the 64gb version (L14) confirm the update as well? I haven't gotten it with my L14 yet.
Click to expand...
Click to collapse
Even me, an FRD-L04 user, didn't receive it. Once we receive the update u can expect it on ur phone within a week or two. That's what happened in the case of the B385 update.
Sent from my Honor 8 using XDA Labs
Got it last night. Currently using phone on first day of the update.
mcvanger said:
Anyone with the 64gb version (L14) confirm the update as well? I haven't gotten it with my L14 yet.
Click to expand...
Click to collapse
Got it last night on my L14.
dsEVOlve said:
Got it last night on my L14.
Click to expand...
Click to collapse
Thanks! Hopefully I get it soon. Any major changes? Heard there were some apps that were added.
Got this update notification on my FRD-L14 2 days ago and for some reason it keeps failing to install with error "failed to verify update package" i was initially rooted and had Magisk 14.0 installed. But i've reverted to stock recovery and boot image which i flashed using fastboot commands.. Can anyone help with the above or better still piont me in the thread on how to create a TWRP package so i can flash it.
I've even gone as far as flashing system.img from my backup B385 UPDATE.APP but still no luck.
I am using a FRD-L14 and currently on stock EMUI 7.0.
Thanks
nestojean said:
Got this update notification on my FRD-L14 2 days ago and for some reason it keeps failing to install with error "failed to verify update package" i was initially rooted and had Magisk 14.0 installed. But i've reverted to stock recovery and boot image which i flashed using fastboot commands.. Can anyone help with the above or better still piont me in the thread on how to create a TWRP package so i can flash it.
I've even gone as far as flashing system.img from my backup B385 UPDATE.APP but still no luck.
I am using a FRD-L14 and currently on stock EMUI 7.0.
Thanks
Click to expand...
Click to collapse
U have stock recovery and boot right? Flash the recovery and boot image of B385 and then from recovery factory reset ur phone. After that try and see if u can update ur device. Also if u wish to lock ur bootloader then hit download latest full package.
Sent from my Honor 8 using XDA Labs
dsEVOlve said:
Got it last night on my L14.
Click to expand...
Click to collapse
Well I got the phone about a week ago and just activated my new tmo sim card last night to get cell service on it so I'm probably not the best judge of whether any performance changes occurred. Based on the change log I wasn't expecting much though.
FYI I'm still completely stock, locked bootloader for now if that made any difference in the delivery of the update.
ayush rao said:
U have stock recovery and boot right? Flash the recovery and boot image of B385 and then from recovery factory reset ur phone. After that try and see if u can update ur device. Also if u wish to lock ur bootloader then hit download latest full package.
Click to expand...
Click to collapse
Thanks for the explanation. This is the route I had to take. I have FRD-L04. I was on B385 with TWRP and Magisk 14.0. Unrooting and flashing boot.img and recovery.img from 385 did not help to install the new update. I keep getting the same error of Package failed. No matter what I seemed to try nothing worked.
So, this sucks, but, I factory reset. Then RE-locked bootloader. Then, I had to download *latest full package* otherwise I still received same error. But, now I am on B388 and i'm going to try flashing TWRP and installing Magisk now.
Live photos seems interesting. Pretty excited about that.
Question to anyone who got the update, any changes in battery life?