Related
Since, the release of the Android M. Google make it hard to root your device. On MIUI 8 with marshmallow I have been trying to figure out a way to root my device. In almost every case I found myself in a boot loop. So after a long work i finally succeed to root my redmi note 3 with no error and bootloop.
I am not responsible for any damage to your devices,loss or damage caused, or alleged to have been caused, directly or indirectly, by the informations or ideas suggested or referenced, etc. If you get a boot loop you can get back to booting by simply flashing the stock "M" system image via fastboot. or Mi flash tool.
Please try at your own risk. Your warranty is now void.
PRE-REQUIREMENTS
1. redmi note 3 ( SD only) with official MiUI 8 6.9.9 developers rom (marshmallow update) :good:
2. officially unlocked bootloader.
3. TWRP recovery ( alka twrp recommended ).
4. patched boot image given below.
5.brain
METHOD RECOVERY METHOD.
1. Download boot.zip and SuperSu.zip
superSu.zip -https://www.androidfilehost.com/?fid=24727369092694142
boot.img - https://www.androidfilehost.com/?fid=24727369092694141
2. copy both the files (boot.img and SuperSu.zip) to your external SD card.
3. now reboot the device in recovery and go to mount section and mount all the partitions.
4. now go to install and go to SD card and flash SuperSu.zip.
5. as the super su is installed go back in install section and select install image.
6. now you will see only .img files so locate to boot.img and select it.
7. In next window you may see two option as " select partition to flash image:" select the first one option BOOT partition and slide the installation slider and reboot your redmi note 3 SD
boot up may take 5-10 mins so don't we panic. and please mention in the comment was it worked for you or not so I can edit boot image for you..
if i help you give me a thanks, by clicking on thanks button
I am on Miui8 6.9.15 Marshmallow, used supersu.zip, boot.img for rooting..., successfully rooted but some times when I restart the device network gone, sometimes bootloop is occurring.. So I need to flash boot.img again and again.. This is taking a lot of time.. What to do?
Just flash supersu stable using ZCX twrp. Head over supersu xda thread for latest stable flashable zip. Worked for me without any issue.
ubaid137 said:
I am on Miui8 6.9.15 Marshmallow, used supersu.zip, boot.img for rooting..., successfully rooted but some times when I restart the device network gone, sometimes bootloop is occurring.. So I need to flash boot.img again and again.. This is taking a lot of time.. What to do?
Click to expand...
Click to collapse
this boot image is only stable with MIUI 8 6.9.9. i am currently working on a universal boot image so no encryption problem occurred... please wait thanks
tsrajput said:
this boot image is only stable with MIUI 8 6.9.9. i am currently working on a universal boot image so no encryption problem occurred... please wait thanks
Click to expand...
Click to collapse
Also my wifi is not working after root..
Does AUX issue resolved in this ROM?
Yet nobody have solution on it hence; i asked.
Headphones work but AUX cable is not working.
Satav said:
Yet nobody have solution on it hence; i asked.
Headphones work but AUX cable is not working.
Click to expand...
Click to collapse
This is not a rom, its a rooting guide.
any news on this ? any new boot.img. I'm on 6.9.22 beta. thanks
Hi there, good to see you.
After struggling to find any helpful information about rooting ZTE Blade A2 plus, I finally was able to root>soft brick>hard brick>stock flash>repeat this beautiful device. So thought to share it here so that it becomes helpful for someone in need.
Device Information: https://forum.xda-developers.com/ge...te-blade-a2-plus-5-5-fhd-mt6750t-3gb-t3480759
Prerequisite: Winrar Latest version, VCOM and device drivers (MT67xx), General intelligence to download the attachments and to arrange everything in order and you're good to go
Step 1: Install custom recovery (We'll install TWRP)
a} Download recovery and preloader
b} Download Scatter file
c} Download SP Flash tools
d} Only tick recovery and preloader and select the downloaded files and flash it
e} When the process finishes and SP flash tools displays done, remove the phone and press "Vol Up+Power" to boot into recovery. It may ask you to make /system writable if you want swipe as indicated
f} Done enjoy
Note: Take this opportuniy to first of all backup your stock rom using TWRP and save it elsewhere.
Step 2: Rooting (With Magisk Or Super SU)
a} Download Magisk or Super SU flashable zip as per your need
Note: Magisk gives most of the Super SU features and doesn't trips google security net so you are able to use banking apps while rooted with magisk
b} Place downloaded zip in your sd card
c} Boot into TWRP recovery and flash the said zip
d} Done enjoy
Step 3: Flashing stock rom (Only russian version as of now)-Language is english bloatwares are Russian
a} Download Stock Rom from https://yadi.sk/d/RZLBrKKv3LxejN
Note: It contains PC Flashable stock rom along with scatter files and NVRAM backups so it'll help if you lose IMEI during the process, it is advisable to keep this offline as backup in case links stops working.
b} Flash the downloaded stock rom with SP flash tools
Note: This stock rom doesn't support VOLTE so i advice you to first take a full backup of your initial rom after installing TWRP, also please share that backup here as well so as i could add it to this thread to make it helpful for someone who has already lost VOLTE inclusing me
Conclusion: I'll be very happy if this information proves useful to you in any manner and also request you to must share your backup for me to get VOLTE back.
Thank You
MIUI 9 For A610 Plus
Preview:
Many many thanks Alfonso for making this vary valuable post . I think A2 Plus and A610 Plus are almost same , so kindly check this ROM me and may solve your volte problem
ww.getdroidtips.com/miui-9-zte-blade-a610-plus/[/url]
Rajevpmavoor said:
Preview:
Many many thanks Alfonso for making this vary valuable post . I think A2 Plus and A610 Plus are almost same , so kindly check this ROM me and may solve your volte problem
ww.getdroidtips.com/miui-9-zte-blade-a610-plus/[/url]
Click to expand...
Click to collapse
Although the rom is bugless but, unfortunately VOLTE didn't work.
MIUI 9 For A610 Plus
Did you flash this new MIUI 9 ROM , I think it has volte and it is in Android M.
Alfonso Osnofla said:
Although the rom is bugless but, unfortunately VOLTE didn't work.
Click to expand...
Click to collapse
does it boot into meta mode on pressing volume down+power button??( bcoz my fone boots into meta mode on doing so)
and how to go into bootloader?
while using sp flash tool i power off the fone and then connect it to sp flash tool via usb cable ...fone gets detected and but download for twrp doesnt occur ..it says PMT changed for the rom, select format all+ download ....
but i didnt do format all coz i dont have flashable stock rom...
I lost my IMEI after flash ROM, not able to retrieve IMEI
Issue in camera & Finger Lock
Alfonso Osnofla said:
Although the rom is bugless but, unfortunately VOLTE didn't work.
Click to expand...
Click to collapse
I have checked both ROM, Miui ROM camera is look like .02MB, No VOLTE, Finger Print lock is not working
Thanks. I have messed up anyway...
Anybody have a complete Readback (Using SP-Flash Tools) copy of (volte) rom?
I lost Imei, From the given NVram.bin, Could not edit Imei using BPGL.... pull as Maui Meta and SN writer can not do this with present update.
I need to revert back. please help with ROM copy and NVRAM Edit.
Alfonso Osnofla said:
Hi there, good to see you.
After struggling to find any helpful information about rooting ZTE Blade A2 plus, I finally was able to root>soft brick>hard brick>stock flash>repeat this beautiful device. So thought to share it here so that it becomes helpful for someone in need.
Device Information: https://forum.xda-developers.com/ge...te-blade-a2-plus-5-5-fhd-mt6750t-3gb-t3480759
Prerequisite: Winrar Latest version, VCOM and device drivers (MT67xx), General intelligence to download the attachments and to arrange everything in order and you're good to go
Step 1: Install custom recovery (We'll install TWRP)
a} Download recovery and preloader
b} Download Scatter file
c} Download SP Flash tools
d} Only tick recovery and preloader and select the downloaded files and flash it
e} When the process finishes and SP flash tools displays done, remove the phone and press "Vol Up+Power" to boot into recovery. It may ask you to make /system writable if you want swipe as indicated
f} Done enjoy
Note: Take this opportuniy to first of all backup your stock rom using TWRP and save it elsewhere.
Step 2: Rooting (With Magisk Or Super SU)
a} Download Magisk or Super SU flashable zip as per your need
Note: Magisk gives most of the Super SU features and doesn't trips google security net so you are able to use banking apps while rooted with magisk
b} Place downloaded zip in your sd card
c} Boot into TWRP recovery and flash the said zip
d} Done enjoy
Step 3: Flashing stock rom (Only russian version as of now)-Language is english bloatwares are Russian
a} Download Stock Rom from https://yadi.sk/d/RZLBrKKv3LxejN
Note: It contains PC Flashable stock rom along with scatter files and NVRAM backups so it'll help if you lose IMEI during the process, it is advisable to keep this offline as backup in case links stops working.
b} Flash the downloaded stock rom with SP flash tools
Note: This stock rom doesn't support VOLTE so i advice you to first take a full backup of your initial rom after installing TWRP, also please share that backup here as well so as i could add it to this thread to make it helpful for someone who has already lost VOLTE inclusing me
Conclusion: I'll be very happy if this information proves useful to you in any manner and also request you to must share your backup for me to get VOLTE back.
Thank You
Click to expand...
Click to collapse
Just try http://www.ztedevice.com/support/detail?id=FE22BEF5C33D4A17BCDA20AAE2631951 ( http://download.ztedevice.com/support/product/569/201802111051594/sd/20180211105554767.zip )
sd card update using twrp.
But first remove the first line from update script file located inside the zip.
Just reply.
Need MIUI rom
Heyy plz gime me teh rom for zte blade A2 plus i really need a miui rom for zte blade A2 plus...
Help I'm confused.
Reading the comments i got to know that many people lost their IMEI and VOLTE , I want to root the device So can anyone tell me when does this problem occur (loosing volte and imei) during rooting or while flashing a custom rom?
kingksath said:
I lost my IMEI after flash ROM, not able to retrieve IMEI
Click to expand...
Click to collapse
Did you loose your IMEI on rooting or while flashing any custom Rom?
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
vasilemk said:
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
Click to expand...
Click to collapse
What is it for?
Is it for volte?
vasilemk said:
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
Click to expand...
Click to collapse
Is this an update to the Stock Rom?
hi, can u help me please, iam tryin to update with twrp , i did remove first line from script but i have error.
Found a way to unlock bands on MTK based phones by flashing basebands from phones with the same chipset. Doing this by using SPFLASH and flashing md1 files. Still unable to connect to cell network on my Doogee bl12000. Flashed this phones MD1, was wondering if anybody could provide me with the nvdata and nvram from the ZTE blase a2 plus. Hoping by flashing those files can connect to a U.S. network.
I created this thread in order to get some discussion going with the possibility to use DualBootPatcher for our Device. The device is supported and so far i got roms to patch but no luck to get it booting.
I hope we can share some information here to get us some dual booting.
Device must be rooted and decrypted for starters.
Got now rr as primary rom and will try later on to flash some roms on the second space... Let you know if that works out.
Tried to dual RR and liquid rom ..No luck. Just reboots to twrp..
Skickat från min ONEPLUS A5010 via Tapatalk
superior8888 said:
Tried to dual RR and liquid rom ..No luck. Just reboots to twrp..
Skickat från min ONEPLUS A5010 via Tapatalk
Click to expand...
Click to collapse
I have also rr as primary but second rom install ended in error 1 in twrp. Maybe you can try to reset data of second rom with the dualboot patcher zip.
It might be helpful to read the Dual Boot Patcher thread for the OP5, as there may be some important info there that is relevant for getting it to work on the 5T.
I tried rr as primary, no problem. Tried adding 2nd rom as secondary, as data slot 1, and no dice. Even tried removing assert lines in the updater script as suggested in op5 with rr as 2nd rom but that didn't work either; either booted back to twrp or booted to a black screen. If anyone makes it work please document and share your work. I'm encrypted by the way, even though you're "supposed" to be decrypted I was able to switch between primary and the non-booting rom just fine.
Anyone having any luck with this?
matteosaeed said:
Anyone having any luck with this?
Click to expand...
Click to collapse
Nope primary install goes good with a oos rom not stock. But when you try to install a second rom it gives error 1 in twrp and rom don't boot up.
That's great! Old MultiROM user here!
Ok, so I was able to successfully patch and boot into LOS and RR. LOS as primary and as slot 1 ROM, and RR as slot 2 ROM while encrypted. This wouldn't allow me to access any files in the phone via file managers for either slot ROMs, only in primary, so you must be decrypted if you're wanting to use/see the data in your internal memory on secondary ROMs. By the way I was only able to boot Nougat ROMs, dualpatcher doesn't work for Oreo ROMs yet. I'll do a small write up tomorrow, it's 1 am here ?
superior888 said:
I created this thread in order to get some discussion going with the possibility to use DualBootPatcher for our Device. The device is supported and so far i got roms to patch but no luck to get it booting.
I hope we can share some information here to get us some dual booting.
Device must be rooted and decrypted for starters.
Click to expand...
Click to collapse
Here is what I did:
IF YOU DON'T KNOW HOW TO DECRYPT, BACK UP YOUR STUFF, FLASH, ROOT, ETC, STOP READING NOW, THIS IS SOME HEAVY STUFF GETTING READY TO HAPPEN ?
If you want functional internal storage and have access to it on all secondary ROMs you must be decrypted. This guide assumes you have all required files on phone and/or computer
1. Flash bluspark recovery (wouldn't work on codeworkx for me)
2. Back up all your data, including internal storage somewhere safe
3. Wipe system, cache, and data (not internal)
4. Coming from Phoenix, so I flashed the Nougat firmware and then LOS 14.1 and booted it
5. Flash magisk 14.0, then install dualbootpatcher app
6. After granting root permission to dualbootpatcher go ahead and go to ROMs and set kernel now
7. Now you must patch another Nougat ROM as data-slot, ID 1 or 2 or 3, whatever you want. You can use the same LOS 14.1 as a test, or the RR Nougat version
8. Transfer the patched ROM to your PC or laptop and without unzipping/extracting the zip go to META-INF/com/google/android and open updater-script with notepad++. Delete the first two lines that's start with the word "assert" and save
9. It should now ask you if you want to update the zip, hit yes. Then transfer the updated patched ROM back to your phone
(you can do this from your phone too using winrar and your favorite file manager; it s a tad easier on your computer as you don't have to extract anything)
10. Now reboot into recovery and flash the patched ROM (do not flash from within the app)
11. Now flash the dualboot utilities in recovery and it should take you to an Aroma menu where you can see both primary and and data slot ROM. Tap the data slot ROM and choose "switch to". If you did everything right it should say "succeeded" and now you can reboot your phone and should boot into the secondary ROM.
12. To root data slot ROMs you must patch the magisk zip for that data slot ROM and then flash it in recovery, the same goes for gapps. Make sure whatever you patch does not have the "assert" lines in the updater script after patching it, else you must delete these lines.
Try it and report back. I can hardly debug my own device so I can't provide much support for you. The above is what I did while encrypted, so again, if you want functional internal storage for the additional ROMs must be decrypted before you try this.
cubandanger05 said:
Ok, so I was able to successfully patch and boot into LOS and RR. LOS as primary and as slot 1 ROM, and RR as slot 2 ROM while encrypted. This wouldn't allow me to access any files in the phone via file managers for either slot ROMs, only in primary, so you must be decrypted if you're wanting to use/see the data in your internal memory on secondary ROMs. By the way I was only able to boot Nougat ROMs, dualpatcher doesn't work for Oreo ROMs yet. I'll do a small write up tomorrow, it's 1 am here ?
Click to expand...
Click to collapse
Thanks for updating us, I'm an old multirom user as well and I'm going to keep my eye on this.
cubandanger05 said:
Here is what I did:
IF YOU DON'T KNOW HOW TO DECRYPT, BACK UP YOUR STUFF, FLASH, ROOT, ETC, STOP READING NOW, THIS IS SOME HEAVY STUFF GETTING READY TO HAPPEN
If you want functional internal storage and have access to it on all secondary ROMs you must be decrypted. This guide assumes you have all required files on phone and/or computer
1. Flash bluspark recovery (wouldn't work on codeworkx for me)
2. Back up all your data, including internal storage somewhere safe
3. Wipe system, cache, and data (not internal)
4. Coming from Phoenix, so I flashed the Nougat firmware and then LOS 14.1 and booted it
5. Flash magisk 14.0, then install dualbootpatcher app
6. After granting root permission to dualbootpatcher go ahead and go to ROMs and set kernel now
7. Now you must patch another Nougat ROM as data-slot, ID 1 or 2 or 3, whatever you want. You can use the same LOS 14.1 as a test, or the RR Nougat version
8. Transfer the patched ROM to your PC or laptop and without unzipping/extracting the zip go to META-INF/com/google/android and open updater-script with notepad++. Delete the first two lines that's start with the word "assert" and save
9. It should now ask you if you want to update the zip, hit yes. Then transfer the updated patched ROM back to your phone
(you can do this from your phone too using winrar and your favorite file manager; it s a tad easier on your computer as you don't have to extract anything)
10. Now reboot into recovery and flash the patched ROM (do not flash from within the app)
11. Now flash the dualboot utilities in recovery and it should take you to an Aroma menu where you can see both primary and and data slot ROM. Tap the data slot ROM and choose "switch to". If you did everything right it should say "succeeded" and now you can reboot your phone and should boot into the secondary ROM.
12. To root data slot ROMs you must patch the magisk zip for that data slot ROM and then flash it in recovery, the same goes for gapps. Make sure whatever you patch does not have the "assert" lines in the updater script after patching it, else you must delete these lines.
Try it and report back. I can hardly debug my own device so I can't provide much support for you. The above is what I did while encrypted, so again, if you want functional internal storage for the additional ROMs must be decrypted before you try this.
Click to expand...
Click to collapse
Thanks! I'll try this next days.
Thanks. Nothing works with Oreo as of yet i suppose :/
superior888 said:
Thanks. Nothing works with Oreo as of yet i suppose :/
Click to expand...
Click to collapse
It may be possible to have oreo as primary and flash Nougat as data slot roms. I tried with Phoenix as primary and I could boot into rr Nougat in data slot but Phoenix wouldnt boot. If someone can try rr oreo as primary and report back. I'm tempted to try with otg and see if I can install secondary roms using extsd option
*Quick update*
I was able to keep latest Phoenix oreo ROM as primary and install and boot Nougat RR as data-slot and as secondary using the latest dualbootpatcher app which may have fixed the "failed to update mbtool" error I was getting on Phoenix ROM. Also I used Magisk 14.0 for root as the latest version 16.0 kept booting back to recovery on non primary ROMs.
I'm still unable to flash Oreo ROMs as data-slot or secondary. At least we're able to keep Oreo as primary and test Nougat ROMs until dualbootpatcher app is compatible with Oreo or until some other fix is released.
Internal storage/data is still encrypted and unreadable on all non-primary ROMs; you must be decrypted prior to installing additional ROMs to have access to it, which I haven't tested yet.
See screenshots
Thanks for keeping up with this. I'm really interested but traveling without my PC so don't want to get stuck without a backup plan. Hopefully it's sorted by the time I get back home or I'll help test some more too.
es0tericcha0s said:
Thanks for keeping up with this. I'm really interested but traveling without my PC so don't want to get stuck without a backup plan. Hopefully it's sorted by the time I get back home or I'll help test some more too.
Click to expand...
Click to collapse
It's been relatively "safe" all the testing that I've done, not many scares, but you can never be too careful.
Edit: Now that it's working almost as intended we should make an official "how to" thread
cubandanger05 said:
It's been relatively "safe" all the testing that I've done, not many scares, but you can never be too careful.
Click to expand...
Click to collapse
If I wasn't out of the country, it'd probably be different. I've customized 100s of phones, 1000s of times but sometimes it's better safe than sorry. I'm great at fixing stuff because I've broken about everything I can (sometimes on purpose, sometimes not lol) but I need navigation and translation more than another custom rom I suppose.
es0tericcha0s said:
If I wasn't out of the country, it'd probably be different. I've customized 100s of phones, 1000s of times but sometimes it's better safe than sorry. I'm great at fixing stuff because I've broken about everything I can (sometimes on purpose, sometimes not lol) but I need navigation and translation more than another custom rom I suppose.
Click to expand...
Click to collapse
? understandable
HeLLO Nova 2 plus users
after updating to android oreo i was unable to flash twrp from nougat
and after a long search i was able to find a Chinese Recovery thats works great like twrp
so i decided to share with u
disclaimer : i am not responsible for any damage to your device so use at your own risk
i'm not the developer of this recovery all rights are to the original developer
requirements :
1: unlocked bootloader
2: all files needed are in this zip files_needed
tutorial :
0:copy files from folder 3 to sdcard and install MagiskManager-v5.8.3.apk ( from folder 3)
1 : enable USB debugging from developer options
2: reboot to fastboot
3: flash twrp by opening twrp.bat from attached file
4:reboot to recovery (volume up and power ) from settings icon at bottom change language to english
5: press install and choose micro sdcard and flash Magisk-v16.0.zip (from folder 3)
6: reboot system
8:you may need to do a cache and dalvik wipe if you got any bootloop
9:enjoy it
Again i'm not responsible for any damage to your device ///
tested on my nova 2 plus BAC-L21 8.0.0.330(C185CUSTC185D1)
don't forget to press the thanks button
it didnt work on oreo
arminbin said:
it didnt work on oreo
Click to expand...
Click to collapse
what is your problem?
flashing to recovery doesnt work, however flashing to recovery_ramdisk does. Also is there any new GSI's that are working for this device ?
.
themediapadguy said:
flashing to recovery doesnt work, however flashing to recovery_ramdisk does. Also is there any new GSI's that are working for this device ?
Click to expand...
Click to collapse
Android 9, Android 10, Android 11 you name it android 9 and android 10 are fully working on the phone android 11 does work but sim issues are there in android 11
in the future there will be custom roms for this phone . the test builds right now are very unstable to use and are confidential for now
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- Decryption works
- Otg works
- Flash Rom works
- F2FS support
- Fastboot boot command support
Not working:
- Fastbootd
- Adb sideload
- Backup restore and image flash (system-vendor-product)
- Android 11 fully support
Download:
TWRP 3.4.0-14 Unofficial by mauronofrio
TWRP 3.4.0-13 Unofficial by mauronofrio
To Flash the TWRP:
Code:
fastboot flash recovery twrp-3.3.1-xx-xxxxxx-mauronofrio.img
Then reboot in TWRP manually or using a fastboot command.
Code:
fastboot boot twrp-3.3.1-xx-xxxxxx-mauronofrio.img
or
Code:
fastboot oem reboot-recovery
REMEMBER: is important that from fastboot you directly go in TWRP mode or the TWRP will be overwritten.
Reccomended ADB and Fastboot binaries:
Adb and Fastboot Installer
Source code:
https://github.com/Teamwin/android_bootable_recovery
https://github.com/mauronofrio/android_device_xiaomi_toco
My Telegram TWRP Support Group:
https://t.me/twrp_Mauronofrio
Donations:
Credits:
- Thanks to @bigbiff and @Captain_Throwback for the hard work on this android 10 TWRP
Thanks to all testers on the Telegram Group
Created 2020-05-29
Oooo finally... Gonna test this out when I get home later.
Just to check, what happens if i flash and i get bootloop? How do I recover? By flashing the entire MIUI rom from official site?
Okay Im sure im being a noob... But err...
I wasnt able to mount data...
I tried to mount and install MAGISK via USB-OTG mounting and i get permission denied for system and vendor (and also Data unable to mount)
EDIT2: Oh cool... despite the errors Magisk got installed! Nice!
Hello, will there be more development for this terminal? and the note 10 lite thread? Thank you
Did anyone boot it?
hello, work boot it?
fastboot boot twrp.XXXX.img
StanGumn said:
hello, work boot it?
fastboot boot twrp.XXXX.img
Click to expand...
Click to collapse
Yes
iron maiden said:
Hello, will there be more development for this terminal? and the note 10 lite thread? Thank you
Click to expand...
Click to collapse
Let us hope so.
I would like to apologize in advance as I am a noob when it comes to the recent changes made by Google to android. So on a lot of the recent devices launched with android 10, an essential step before flashing Magisk is to disable the vbmeta partition by flashing the "vbmeta.img" using a fastboot command with the --disable-verify and --disable-verification argument. My question is that is the "vbmeta.img" modified by developers or is this the same identical file found in the stock firmware files?
I do apologize if this is the wrong thread but there's not many resources online or even on xda for this device.
Why its in mi note 10 general section? Isnt right to do separately section for mi note 10 lite since there is nothing in common just name.
Reanimax said:
Why its in mi note 10 general section? Isnt right to do separately section for mi note 10 lite since there is nothing in common just name.
Click to expand...
Click to collapse
ask to xda to make a dedicated section and i will ask to move this thread
mauronofrio said:
ask to xda to make a dedicated section and i will ask to move this thread
Click to expand...
Click to collapse
Yes. You right about it.
Kediraksith said:
Oooo finally... Gonna test this out when I get home later.
Just to check, what happens if i flash and i get bootloop? How do I recover? By flashing the entire MIUI rom from official site?
Okay Im sure im being a noob... But err...
I wasnt able to mount data...
I tried to mount and install MAGISK via USB-OTG mounting and i get permission denied for system and vendor (and also Data unable to mount)
EDIT2: Oh cool... despite the errors Magisk got installed! Nice!
Click to expand...
Click to collapse
Nowadays you have to unmount Data and mount vendor (just in case for Vendor) before flashing Magisk. Mounting data does not let Magisk install via TWRP. Follow the this process, same install process with the Mi Note 10, and assuming the Mi note 10 Lite. The reason why is because of encryption.
Update: 5/16/2020
1) Flash lastest TWRP unofficial 3.31-4 mauronofrio using Command prompt using the - fastboot flash recovery [XXXX].img. Note: it's easier to just rename the recover image to "twrp"
2) Then - fastboot boot [XXXX].img to reboot into TWRP recovery.
3) In my experience for thr Mi Note 10 that is, the reboot to RECOVERY did not happened, so instead i pressed - volume up and power button at the same time for thr phone to reboot until you see the boot splash screen, hold the two buttons for another 3 seconds ... and then let go of power button and then TWRP recovery will show up.
4) Ok...so first things first... flash the VBMETA PATCHER like the OP says on first page --> that way you don't lose TWRP after flashing the Rom and MAGISK. After install, reboot to RECOVERY. ***This is only if OP asks to flash VBMETA PATCHER, otherwise skip to Step 5***
5) Now....go to FORMAT DATA (Warning: DON'T use advanced wipe)... Instead, go to the FORMAT DATA, type in yes and press ok. Then go back to main menu, and reboot to RECOVERY again.
6) Now you can access your internel memory when connecting to USB... You can import the two neccesary files --> Xiaomi.EU and MAGISK 20.4. Now Flash the Rom and when flash MAGISK, make sure you unmount DATA and mount VENDOR to avoid flash error. After unticking DATA, you can now install Magisk.
7) Now you can go to REBOOT, and press SYSTEM, and the phone will boot to Xiaomi EU 11 or 12, etc. just follow this process and enjoy your ROM. ?
Note: When updating, flash EU rom and Magisk, dont forget to unmount Data when flashing Magisk. You can probably disable decryption because that is why you can't mount Data when flashing Magisk. **Just don't ask me about it because I normally don't flash Disable Decyption often.
Wmateria said:
Nowadays you have to unmount Data and mount vendor (just in case for Vendor) before flashing Magisk. Mounting data does not let Magisk install via TWRP. Follow the this process, same install process with the Mi Note 10, and assuming the Mi note 10 Lite. The reason why is because of encryption.
1) Flash lastest TWRP unofficial 3.31-4 mauronofrio using Command prompt using the - fastboot flash recovery [XXXX].img. Note: it's easier to just rename the recover image to "twrp"
2) Then - fastboot boot [XXXX].img to reboot into TWRP recovery.
3) In my experience for thr Mi Note 10 that is, the reboot to RECOVERY did not happened, so instead i pressed - volume up and power button at the same time for thr phone to reboot until you see the boot splash screen, hold the two buttons for another 3 seconds ... and then let go of power button and then TWRP recovery will show up.
4) Ok...so first things first... flash the VBMETA PATCHER like the OP says on first page --> that way you don't lose TWRP after flashing the Rom and MAGISK. After install, reboot to RECOVERY.
5) Now....go to FORMAT DATA (Warning: DON'T use advanced wipe)... Instead, go to the FORMAT DATA, type in yes and press ok. Then go back to main menu, and reboot to RECOVERY again.
6) Now you can access your internel memory when connecting to USB... You can import the two neccesary files --> Xiaomi.EU and MAGISK 20.4. Now Flash the Rom and when flash MAGISK, make sure you unmount DATA and mount VENDOR to avoid flash error. After unticking DATA, you can now install Magisk.
7) Now you can go to REBOOT, and press SYSTEM, and the phone will boot to Xiaomi EU 11 or 12, etc. just follow this process and enjoy your ROM.
Note: When updating, flash EU rom and Magisk, dont forget to unmount Data when flashing Magisk. You can probably disable decryption because that is why you can't mount Data when flashing Magisk. **Just don't ask me about it because I normally don't flash Disable Decyption often.
Click to expand...
Click to collapse
this post is gold! Coming back to xiaomi and twrp after 2 years with a huawei, hope to go smooth again with root magisk etc!
cerme said:
this post is gold! Coming back to xiaomi and twrp after 2 years with a huawei, hope to go smooth again with root magisk etc!
Click to expand...
Click to collapse
The root and flash process is basically the same process as the Mi 9T/K20, Mi Max 3, Mi Note 10 since decryption is now a common thing with Android 10... except for the VBmeta.zip, which is new and necessary to flash, as long as you follow the directions..you'll be fine.
Wmateria said:
The root and flash process is basically basically the same process as the Mi 9T/K20, Mi Max 3, Mi Note 10 since decryption is now a common thing with Android 10... except for the VBmeta.zip, which is new and necessary to flash, as long as you follow the directions..you'll be fine.
Click to expand...
Click to collapse
I understand. Last experience ti flash etc was on a mi5, so I have a little bit of rust with that. I do think that following instructions i shouldn't face major difficulties
cerme said:
I understand. Last experience ti flash etc was on a mi5, so I have a little bit of rust with that. I do think that following instructions i shouldn't face major difficulties
Click to expand...
Click to collapse
Same here, i was on the Mi 9T before, I didnt understood the whole new flashing process and carefully updating from EU Rom to AOSP Roms and back, I think i was messing with with thwe wipe and change partition feature (f2fs to ext 4 with an EU Rom) - then the Mi 9T bricked big time. Never recovered after that, luckily got it refunded for it but not many may have that second chance. After learning how to flash propeely and root, ect. I try to help out here when needed and ask too. I just got my Mi Note 10 2 weeks ago and rooted a week ago. So if anything, am willing to help out and repeat the following flash process or any changes in the future and feedback on future Roms.
Was thinking about which rom to use... does xiaomi.eu is stille faster with providing updates? what about the situation with OTA with that.
Now I have the phone with global rom, I want at least flash the EEA rom. But I also know that at some point i want to root, install magisk and get nice features. Still don't want to update manually everytime for an update...
will be watching this thread with much interest..
I recently bought this device (Global version) for use here in Australia.
my first time owning a Xiaomi - quite happy with it so far.
would be nice to have the themeing stuff work properly - I have used MIUI based ROMs back a LOoonggg time ago, in the days of the Nexus S and Galaxy Nexus etc.
used to have a new ROM flashed every couple of days lol, back then. But recent years I've stopped all that, no cool ROMs no snazzy kernels TWRP no nothing not even root lol, very boring!
anyway thanks for posting I hope to try this sometime soon
Hello is there any Eu rom for Mi note 10 lite?
Alisiddiqui75 said:
Hello is there any Eu rom for Mi note 10 lite?
Click to expand...
Click to collapse
yes, there is the EEA ROM you can find on miui website. You can flash it after unlocking bootloader with miFlash
Alisiddiqui75 said:
Hello is there any Eu rom for Mi note 10 lite?
Click to expand...
Click to collapse
I'm not sure if you mean the official ROM or xiaomi.eu.
The link to the official EEA(EU) ROM:
Recovery: https://bigota.d.miui.com/V11.0.7.0.QFNEUXM/miui_TOCOEEAGlobal_V11.0.7.0.QFNEUXM_7926bf9c02_10.0.zip
Fastboot: https://bigota.d.miui.com/V11.0.7.0...EUXM_20200508.0000.00_10.0_eea_4eb1c694c9.tgz
I have yesterday seen a xiaomi.eu Stable build for toco which is based on Global Stable ROM:
https://sourceforge.net/projects/xi...e10LITE_V11.0.4.0.QFNMIXM_v11-10.zip/download
I can not promise that it's working.